Program board

The K-TERM42 is an option board that can be fitted on the portable radios DP340x and DP360x and the mobile radios DM340x and DM360x. On analogue channels, the K-TERM42 is a select 5 decoding and encoding module with a Man Down alarm functionality. The K-TERM42 select 5 module can be used in all analogue radio systems with the select 5 functionality. On digital channels, both the Man Down and lone worker functionality can be used for in-house localisation. The signals from beacons (K-TERM70) are detected and the radio position is sent to the base. Programming the functionality is easy thanks to the K-TERM CPS program. Once the option board is installed in the radio and the radio attached to the PC with the Motorola USB cable, the CPS program allows users to set all parameters and save them in the option board. When a new option board firmware is released, it can be uploaded to the option board using the same CPS programme. Radio Hardware / Releases Compatibility DP340x / DP360x and DM340x / DM360x. Computer Hardware / Operating Systems Windows 2000 / XP / VISTA with installed Motorola USB drivers for connecting the DMR radios. Interfaces USB programming cable from Motorola. Other Requirements After installing the option board in the radio, the Motorola dealer must be equipped with the tools to restore the waterproofing of the radio. The necessary tools and information are available from Motorola. • Lone Worker. • Man Down. • In-house localisation. • Universal Option Board. • 5-Tone Signaling. • Console for analogue mode. • All buttons programmable for encoding sequences. • Customised options. • Tilt switch for Man Down (optional). • Alarm notifications.

Drake TR 7 NICE CONDITION FULL OPTIONS: 1530: DR7 GENERAL COVERAGE BOARD 1536: AUX 7 RANGE PROGRAM BOARD 1537: NB-7 NOISE BLANKER 1529: FA-7  (NOT ORIGINAL) 7021: SL 300 CW FILTER  7022: SL 500 CW FILTER 7023: SL 1800 SSB FILTER ORIGINAL USER MANUAL

RARE Lance Johnson Engineering Kansas City KC Keyer KC-1 Excellent Condition, very clean and ready to use  Please see pictures and ask questions FREE RETURNS!! The KC1 Keyer/Frequency Counter The KC1 Keyer/Displayless Frequency Counter kit, designed and programmed by N6KR, is the perfect accessory for any QRP rig. This micro-miniature unit provides an Iambic keyer with message memory AND a Morse-code-output, universal frequency counter that reports your operating frequency to +/- 1kHz. The heart of the KC1 is a single chip, 18-pin microprocessor. The PC board is quite small--about 0.8" tall by 2.5" wide--and will work with the NorCal 40, 40A, and Sierra, as well as nearly any other QRP rig. Total current drain of the KC1 module is only 4mA, in keeping with the low-current philosophy of the Wilderness Radio product line. To simplify installation of the KC1, the Wilderness NorCal 40A and Sierra transceivers provide convenient access to all of the connection points needed. Also, the physical layout of the controls on the KC1 is compatible with both rigs. (There may be a special KC1-compatible front panel available for the '40A; contact Wilderness for more info.) The manual provides installation details for nearly all popular QRP rigs, including those from Heathkit, MJF, OHR, Small Wonders Labs, as well as rigs that have been published in QST or the ARRL Handbook. Specifications of the KC1 Keyer * 7 to 50WPM keyer w/the two most popular Iambic keying modes * multiple variable length message buffers, with a total of 50 characters of message memory and a word-repeat macro to save memory * user-settable weight and QSK delay * optional sidetone pitch (different from frequency/command mode pitch) Counter The frequency counter does not use a display. Instead, you press a button on the front panel to hear the frequency as three digits in Morse code. For example, if your operating frequency is 7.132MHz, you'll hear "132". The rig is not keyed when reporting the frequency; the KC1 generates an audio tone that is fed directly to the A.F. amplifier. Another feature of the counter is frequency search. If you press and hold the FREQ button a bit longer, you are prompted with an 'F', at which point you can enter a frequency to search for. As you turn the VFO knob, the KC1 alerts you when you reach approximately the desired frequency. The KC1 supports multiband rigs, too. You can program in up to four different VFO offsets, then use two pins on the board as band selection inputs. This is useful on rigs that cover both 80 and 40 meters, for example: you'll hear "000" as the band edge on 40 meters, and "500" as the band edge on 80 meters. Command Mode The KC1 also has a command mode, in which you can program the VFO offsets, keying weight, frequency reporting speed, and many other parameters. You use the keyer paddle to communicate with the KC1 in command mode, and the rig is not keyed--only an audio output is generated in this mode. Other Features The KC1 has a handkey input (for use in keying the rig and optional sidetone only--not for entering commands). It also has a user-definable logic-level control output. The 'A' command toggles this pin from ON (logic 1) to OFF (logic 0). You could use this to turn on a sharp CW filter, panel light, or anything else controllable with a digital signal. In effect, it gives you an extra panel switch.

PortaPack + HackRF One SDR + Metal Case +10M 0.5ppm TXCO + Havoc Firmware ZH Feature: Portapack 2019 latest PCB version, with 10MHZ 0.5PPM TCXO in PCB for HACKRF GPS related experiment. Whole gold-plating craft Touch screen is included 0.5PPM TXCO in board   Important Notice: 1.Uncover the seal of screen and Navigation button, ONLY IF you are satisfied with it. 2.This board needs your professional knowledge. It work as a extend display unit of HACKRF. We always shipping with latest firmware and default are HAVOC version. More detail please reference to our pictures. The official firmware created for the PortaPack has  several decoders and transmitters built into it, but the third  party 'Havoc' firmware  is really what you'll want to use with  it since it contains many more decoders and transmit options. You  can fully unleash the power of the Portapack as this comes with Havoc Firmware Installed! Package list: 1x Portapack(Havoc Firmware  Preinstalled) 1x HackRF one 1x Antenna 1x Usb cable         The case headset hole is for iphone headset or  same size headset According to source code: github.com/sharebrained/portapack-hackrf Redesign this hardware and share it to the enthusiast. Progress of work: 1. has completed the program validation prototype. 2. the latest 2017.5 month documents are based on improvements. Le 20-déc.-19 à 08:52:40 Paris, le vendeur a ajouté les informations suivantes:

Feature: Portapack 2019 latest PCB version, with 10MHZ 0.5PPM TCXO in PCB for HACKRF GPS related experiment. Whole gold-plating craft Touch screen is included 0.5PPM TXCO in board   Important Notice: 1.Uncover the seal of screen and Navigation button, ONLY IF you are satisfied with it. 2.This board needs your professional knowledge. It work as a extend display unit of HACKRF. We always shipping with latest firmware and default are HAVOC version. More detail please reference to our pictures. The official firmware created for the PortaPack has  several decoders and transmitters built into it, but the third  party 'Havoc' firmware  is really what you'll want to use with  it since it contains many more decoders and transmit options. You  can fully unleash the power of the Portapack as this comes with Havoc Firmware Installed! Package list: 1x Portapack(Havoc Firmware  Preinstalled) 1x HackRF one 1x Antenna 1x Usb cable         The case headset hole is for iphone headset or  same size headset According to source code: github.com/sharebrained/portapack-hackrf Redesign this hardware and share it to the enthusiast. Progress of work: 1. has completed the program validation prototype. 2. the latest 2017.5 month documents are based on improvements. Le 17-janv.-20 à 14:26:17 Paris, le vendeur a ajouté les informations suivantes:

Feature: Portapack 2019 latest PCB version, with 10MHZ 0.5PPM TCXO in PCB for HACKRF GPS related experiment. Whole gold-plating craft Touch screen is included 0.5PPM TXCO in board   Important Notice: 1.Uncover the seal of screen and Navigation button, ONLY IF you are satisfied with it. 2.This board needs your professional knowledge. It work as a extend display unit of HACKRF. We always shipping with latest firmware and default are HAVOC version. More detail please reference to our pictures. The official firmware created for the PortaPack has  several decoders and transmitters built into it, but the third  party 'Havoc' firmware  is really what you'll want to use with  it since it contains many more decoders and transmit options. You  can fully unleash the power of the Portapack as this comes with Havoc Firmware Installed! Package list: 1x Portapack(Havoc Firmware  Preinstalled) 1x HackRF one 1x Antenna 1x Usb cable         The case headset hole is for iphone headset or  same size headset According to source code: github.com/sharebrained/portapack-hackrf Redesign this hardware and share it to the enthusiast. Progress of work: 1. has completed the program validation prototype. 2. the latest 2017.5 month documents are based on improvements. Le 05-févr.-20 à 15:21:03 Paris, le vendeur a ajouté les informations suivantes:

Feature: Portapack 2019 latest PCB version, with 10MHZ 0.5PPM TCXO in PCB for HACKRF GPS related experiment. Whole gold-plating craft Touch screen is included 0.5PPM TXCO in board   Important Notice: 1.Uncover the seal of screen and Navigation button, ONLY IF you are satisfied with it. 2.This board needs your professional knowledge. It work as a extend display unit of HACKRF. We always shipping with latest firmware and default are HAVOC version. More detail please reference to our pictures. The official firmware created for the PortaPack has  several decoders and transmitters built into it, but the third  party 'Havoc' firmware  is really what you'll want to use with  it since it contains many more decoders and transmit options. You  can fully unleash the power of the Portapack as this comes with Havoc Firmware Installed! Package list: 1x Portapack(Havoc Firmware  Preinstalled) 1x HackRF one 1x Antenna 1x Usb cable         The case headset hole is for iphone headset or  same size headset According to source code: github.com/sharebrained/portapack-hackrf Redesign this hardware and share it to the enthusiast. Progress of work: 1. has completed the program validation prototype. 2. the latest 2017.5 month documents are based on improvements.   Le 17-mars-20 à 13:47:38 Paris, le vendeur a ajouté les informations suivantes:

Feature: Portapack 2019 latest PCB version, with 10MHZ 0.5PPM TCXO in PCB for HACKRF GPS related experiment. Whole gold-plating craft Touch screen is included 0.5PPM TXCO in board   Important Notice: 1.Uncover the seal of screen and Navigation button, ONLY IF you are satisfied with it. 2.This board needs your professional knowledge. It work as a extend display unit of HACKRF. We always shipping with latest firmware and default are HAVOC version. More detail please reference to our pictures. The official firmware created for the PortaPack has  several decoders and transmitters built into it, but the third  party 'Havoc' firmware  is really what you'll want to use with  it since it contains many more decoders and transmit options. You  can fully unleash the power of the Portapack as this comes with Havoc Firmware Installed! Package list: 1x Portapack(Havoc Firmware  Preinstalled) 1x HackRF one 1x Antenna 1x Usb cable         The case headset hole is for iphone headset or  same size headset According to source code: github.com/sharebrained/portapack-hackrf Redesign this hardware and share it to the enthusiast. Progress of work: 1. has completed the program validation prototype. 2. the latest 2017.5 month documents are based on improvements. Le 12-mars-20 à 16:44:35 Paris, le vendeur a ajouté les informations suivantes:

Feature: Portapack 2019 latest PCB version, with 10MHZ 0.5PPM TCXO in PCB for HACKRF GPS related experiment. Whole gold-plating craft Touch screen is included 0.5PPM TXCO in board   Important Notice: 1.Uncover the seal of screen and Navigation button, ONLY IF you are satisfied with it. 2.This board needs your professional knowledge. It work as a extend display unit of HACKRF. We always shipping with latest firmware and default are HAVOC version. More detail please reference to our pictures. The official firmware created for the PortaPack has  several decoders and transmitters built into it, but the third  party 'Havoc' firmware  is really what you'll want to use with  it since it contains many more decoders and transmit options. You  can fully unleash the power of the Portapack as this comes with Havoc Firmware Installed! Package list: 1x Portapack(Havoc Firmware  Preinstalled) 1x HackRF one 1x Antenna 1x Usb cable         The case headset hole is for iphone headset or  same size headset According to source code: github.com/sharebrained/portapack-hackrf Redesign this hardware and share it to the enthusiast. Progress of work: 1. has completed the program validation prototype. 2. the latest 2017.5 month documents are based on improvements. Le 04-avr.-20 à 15:11:22 Paris, le vendeur a ajouté les informations suivantes:

Feature: Portapack 2019 latest PCB version, with 10MHZ 0.5PPM TCXO in PCB for HACKRF GPS related experiment. Whole gold-plating craft Touch screen is included 0.5PPM TXCO in board   Important Notice: 1.Uncover the seal of screen and Navigation button, ONLY IF you are satisfied with it. 2.This board needs your professional knowledge. It work as a extend display unit of HACKRF. We always shipping with latest firmware and default are HAVOC version. More detail please reference to our pictures. The official firmware created for the PortaPack has  several decoders and transmitters built into it, but the third  party 'Havoc' firmware  is really what you'll want to use with  it since it contains many more decoders and transmit options. You  can fully unleash the power of the Portapack as this comes with Havoc Firmware Installed! Package list: 1x Portapack(Havoc Firmware  Preinstalled) 1x HackRF one 1x Antenna 1x Usb cable         The case headset hole is for iphone headset or  same size headset According to source code: github.com/sharebrained/portapack-hackrf Redesign this hardware and share it to the enthusiast. Progress of work: 1. has completed the program validation prototype. 2. the latest 2017.5 month documents are based on improvements.   Le 11-avr.-20 à 08:31:15 Paris, le vendeur a ajouté les informations suivantes:

ICOM RS-746 Remote Control Radio Software for IC-746 Ver 1.0  on CD   No Contract, No Lease, No Limit's. You Own It This is Cloned ICOM Original Software What's on This CD 1998 v1.0 ICOM ORIGINAL RS-746 Files Includes One (1) CD Software Disk DOES NOT include a 9 pin RS232 Serial Port Cable and a 1/8" pin  to connect PC to Radio I believe you must use an Icom Cable, Because it has a circut board in the RS232 See Sample Photo of Cable Included in This Listing SYSTEM REQUIREMENTS - IBM PC compatible computer - An RS-232C serial port - Microsoft® Windows® 95 or Newer - Intel i486DX4 processor or faster   (Pentium® 100 MHz or faster recommended) - At least 16 MB RAM - At least 20 MB of free hard disk space - At least 640 x 480 pixel display   (800 x 600 pixel display recommended) Be sure that the IC-746 CI-V baud rate is set to "AUTO" (default) in the set mode. SOFTWARE INSTALLATION CD Insert the CD into the appropriate drive. Double Click on SETUP.EXE program Follow the prompts   Windows Vista  Win XP  Win 7  Win 8  Win 8.1  Win 10 For Windows 32-Bit or 64-Bit Computer Systems Visit KJ4IYE Manuals