Provides

Radio receiver R-390A/URR manufactured by AMELCO under Collins Radio's patent, s/n 637. Here is an historic piece of equipment that has become rare to find in good working conditions. The R-390A/URR provides reception of continuous-wave (CW), modulated-continuous-wave (MCW), frequency-shift keyed (FSK), and single-sideband (SSB) signals. A double sideband signal, either AM or phase-modulated (PM), occupying up to a total of 12 kHz of spectrum for voice transmission may also be received Radio Receiver R-390A/URR is a super heterodyne type with multiple frequency conversion covering a frequency range of 0.5 to 32 MHz. Double conversion is used when operating from 8.0 to 32 MHz, and triple conversion when operating from 0.5 to 8.0 MHz. Linear tuning provides constant frequency spread throughout the entire range. Tuning is accomplished by positioning powdered-iron cores in the RF and IF coils, at a rate controlled by a mechanical arrangement of gears, shafts, and cams. The operating frequency is read from a counter-type indicator. A built-in crystal-controlled oscillator provides frequency calibration. The output of the LOCAL AUDIO provides either 500 mW power to a 600 ohm load or 1 mW for a headset, while the output of the LINE AUDIO provides a 10 mW output Into a 600 ohm balanced line. A BREAK-IN relay is also provided to disconnect the antenna when an associated transmitter is keyed. List of tubes: 6DC6, 6AK5W, 6AK5W, 6C4, 6C4, 6C4, 6BA6W,6BA6W, 6BA6W, 6BA6W, 6BA6W, 6BA6W, 6AK6, 6AK6, 6AK6, 5814A, 5814A, 5814A, 5814A, 5814A, 5814A, 5814A, 26Z5W, 26Z5W, 3TF7, 0A2.                                         Original characteristics : Frequency range 0.5 to 32 MHz Types of signals received CW, MCW, FSK, SSB, and AM Frequency indication Read from digital Indicator Method of calibration Built-In crystal-controlled oscillator Calibration accuracy Less Than 300 Hz Calibration points Every 100 kHz Sensitivity (signal plus noise to noise ratio) AM sensitivity CW sensitivity 5 μV at 10dB rise 1 μV at 10dB rise       Modifications : 1-    220V mains filter (Schaffner) has been added 2-    On state surge current limiter (Keystone Thermometrics ICL) 3-    SO-239 antenna socket 4-    Audio transformer to use a 4 or 8 Ohm speaker (instead of the regular 600 Ohm speaker) 5-    All tubes have been replaced by N.O.S. USA imported What you see on the photos is what you get. It will be carefully packed in a 3 layer card box. This receiver is in working order, nevertheless, due to its age (~50 years), no warranty is provided whatsoever. It is a heavy piece of equipment: 35kg.

For sale Oppo HA-1 DAC & headphone amplifier. The amplifier has been very well taken care of (still has the original screen protection film) and is in very good condition (minor imperfection in the upper right corner next to potentiometer - hardly visible, check pics). Exquisite build and fantastic quality. Included:  - Oppo HA-1 DAC & headphone amplifier  - Remote control  - Power cord (EU)  - USB cable  - SPDIF coaxial cable The item will be carefully packed and sent via tracked and insured shipping. HIGH PERFORMANCE AUDIO - Discrete Class A Amplifier A Class A amplifier conducts signal over the entire range of the input signal cycle. The output transistors are biased to operate in their most linear range, and there is no crossover distortion caused by switching the signal between two push-pull devices. The HA-1's power amplification circuit for the headphones is Class A built with discrete transistors. The discrete design allows us to hand-pick and match the best parts to build the HA-1. - Toroidal Power Supply A toroidal power transformer offers superior power efficiency and much lower exterior magnetic fields over traditional laminated steel core transformers. The HA-1's toroidal linear power supply provides a very clean and robust power source to the audio components. - Fully Balanced Design The internal analog audio signal path of the HA-1 is fully balanced. For digital audio, the signal runs in balanced mode all the way from the DAC to the output jacks. Balanced analog input is kept intact, and single-ended input is converted to balanced at the input buffer. All single-ended outputs are derived from the balanced signal as well. The balanced design provides better common-mode noise rejection and improves signal quality. The balanced headphone output provides twice the voltage and four times the power of the single-ended output, enabling the HA-1 to drive the most power hungry headphones. It also provides better channel seperation by eliminating the common ground return path. - ESS Sabre32 Reference DAC The DAC is one of the most important components for digital audio playback. The SABRE32 Reference ES9018 from ESS Technology is the world’s best performing 32-bit audio DAC solution targeted for high-end consumer applications and professional studio equipment. With the ESS patented 32-bit Hyperstream™ DAC architecture and Time Domain Jitter Eliminator, the SABRE32 Reference DAC delivers an unprecedented DNR (Dynamic Range) of up to 135dB and THD+N (Total Harmonic Distortion plus Noise) of -120dB, the industry’s highest performance level that will satisfy even the most demanding audio enthusiast. To learn more about the technologies behind the exceptional performance of the SABRE DAC, please read the SABRE Technical White Paper. OPPO HA-1 4.3" information display - Clean Signal Path The HA-1 uses an analog potentiometer (the familar volume knob) to control the volume. By avoiding re-digitizing the audio signal for volume adjustment, the HA-1 provides a clean signal path for the audio. At the same time, the convenience of modern digital volume control is not lost - a remote-controlled motor turns the volume knob and a 10-bit analog-to-digital converter samples the signal to display a numeric dB level. - Made for iPod®, iPhone® and iPad® The HA-1 passes Apple's "MFi" certification and is compatibile with the latest iPod, iPhone and iPad to be used as the digital audio output accessory of these devices. By tapping directly into the digital audio signal of these devices and converting the audio to analog using the high performance SABRE32 Reference DAC, music from your favorite portable device will sound its best. - Wireless Audio via Bluetooth The HA-1 supports Bluetooth Advanced Audio Distribution Profile (A2DP) with both the standard and aptX® high quality codec. Simply pair your phone with the HA-1 and set music free

Wohler HRS-1S *2 Channel Self-Powered Speaker System, 2 XLR Inputs. A, B, or A+B Summing Selection.Great Condition.Guaranteed not DOA.** Power Supply is not included.Product DescriptionThe HRS-1S provides self-powered, full-fidelity audio monitoring of 2 analog channels in the smallest space possible (half-width 1 RU). This unit contains two high performance transducers driven by two power amplifiers: one amplifier/driver combination handles midrange and high frequency information, while the second handles summed low frequency information below the 500 Hz crossover point.The unique design allows this unit to fit almost anywhere, and provides optimally focused sound for operators in an ultra near field (1 to 3 ft.) working environment. This provides for a higher SPL for the operator while reducing overall ambient sound and adjacent bay crosstalk.Extended HF response reveals potential problems with audio whine or hiss. Electronic rather than acoustic cancellation of bass frequencies provides positive audible detection of out-of-phase (reversed polarity) audio feeds. A headphone jack is provided on the front panel, usage automatically mutes the speakers. Output limiter circuits are incorporated to protect the speakers, and extensive magnetic shielding allows placement immediately adjacent to video monitors with no color impurities.FeaturesPremium 

Casque jeu filaire casque micro pr PS4 PC téléphone portable dans oreille SH Product features: Metal removable microphone and earphone shell, food-grade silicone earplugs, removable microphone, 10mm dynamic driver, etc. However, it has anti-deformation, damage and destruction, non-toxic, odorless, no discoloration, high-temperature resistance, and other properties. Due to its soft material, it will not hurt your ears after long-term use, the movable microphone is fast and easy to use, and the 10 mm dynamic driver eliminates high, medium and low bass distances, and provides clear, transparent sound and strong sound. Provides rich bass effects. 2. [Dual microphone design]: In addition to the microphone connected to the headphone cable, there is an independent 360° bendable microphone. The microphone has a noise reduction function that allows you to bend it to the best position to suit your needs and maintain good online communication. This microphone can be disassembled, when you are not playing, you can take it off and use it as a normal headset, answer the phone, listen to music, etc. 3. Anti-winding wire design: the use of high-quality TPE wire, with high toughness and strong elasticity, greatly improving the tensile strength of the headset, to prevent damage to the headset due to winding. The removable plug-in microphone is convenient and fast, and the speed of enjoying music and games is fast enough. 4 [Excellent compatibility] Although this headset is designed for PC gaming, it also has the function of supporting ordinary headsets, such as listening to music and making phone calls. 4 kinds of games (COD, Monahan, etc.), smartphone games (field action, PUBG, etc.), and dual microphone design can easily adapt to various situations and needs. It can be used for tablet PC, PC, PS4, iPhone, Samsung, Sony, Xperia, Huawei smartphone, Nintendo Switch, 3DS, Xbox One, Wii U, etc. Note: If you want to use an old Xbox, you need to purchase a special adapter (this product is not included). Product Specifications: Microphone size: Medium 4.0*1.5mm Microphone sensitivity: -42 ± 3dB Directivity: Omnidirectional microphone Microphone impedance: 2.2KQ2 Speaker size: medium 10mm Speaker impedance: 1602 Frequency response range: 20-20000Hz Input power: 3mW Connection cable: about 1.25 meters Pin type: 3.5 4pin Package Contents:  headphone body x1 earplugs x2 removable microphone x1 Y-type headphone conversion adapter cable x1 storage bag x1   Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Si vous n'êtes pas satisfait de votre achat, contactez-nous sans hésiter. Les articles peuvent être retournés dans 30 jours en état inutilisé, nous effectuerons un échange et un remboursement une fois que nous aurons reçu l'objet. Gardez les étiquettes entières et les éléments propres sans saveur, si non nous n'accepterons pas le retour. Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Product features: Metal removable microphone and earphone shell, food-grade silicone earplugs, removable microphone, 10mm dynamic driver, etc. However, it has anti-deformation, damage and destruction, non-toxic, odorless, no discoloration, high-temperature resistance, and other properties. Due to its soft material, it will not hurt your ears after long-term use, the movable microphone is fast and easy to use, and the 10 mm dynamic driver eliminates high, medium and low bass distances, and provides clear, transparent sound and strong sound. Provides rich bass effects. 2. [Dual microphone design]: In addition to the microphone connected to the headphone cable, there is an independent 360° bendable microphone. The microphone has a noise reduction function that allows you to bend it to the best position to suit your needs and maintain good online communication. This microphone can be disassembled, when you are not playing, you can take it off and use it as a normal headset, answer the phone, listen to music, etc. 3. Anti-winding wire design: the use of high-quality TPE wire, with high toughness and strong elasticity, greatly improving the tensile strength of the headset, to prevent damage to the headset due to winding. The removable plug-in microphone is convenient and fast, and the speed of enjoying music and games is fast enough. 4 [Excellent compatibility] Although this headset is designed for PC gaming, it also has the function of supporting ordinary headsets, such as listening to music and making phone calls. 4 kinds of games (COD, Monahan, etc.), smartphone games (field action, PUBG, etc.), and dual microphone design can easily adapt to various situations and needs. It can be used for tablet PC, PC, PS4, iPhone, Samsung, Sony, Xperia, Huawei smartphone, Nintendo Switch, 3DS, Xbox One, Wii U, etc. Note: If you want to use an old Xbox, you need to purchase a special adapter (this product is not included). Product Specifications: Microphone size: Medium 4.0*1.5mm Microphone sensitivity: -42 ± 3dB Directivity: Omnidirectional microphone Microphone impedance: 2.2KQ2 Speaker size: medium 10mm Speaker impedance: 1602 Frequency response range: 20-20000Hz Input power: 3mW Connection cable: about 1.25 meters Pin type: 3.5 4pin Package Contents:  headphone body x1 earplugs x2 removable microphone x1 Y-type headphone conversion adapter cable x1 storage bag x1 PAYMENT Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. SHIPPING Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Terms of Sale Si vous n'êtes pas satisfait de votre achat, contactez-nous sans hésiter. Les articles peuvent être retournés dans 30 jours en état inutilisé, nous effectuerons un échange et un remboursement une fois que nous aurons reçu l'objet. Gardez les étiquettes entières et les éléments propres sans saveur, si non nous n'accepterons pas le retour. ABOUT US Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Le 08-déc.-20 à 08:16:23 Paris, le vendeur a ajouté les informations suivantes:

The ViewSonic ®  M1 is an ultra-portable LED projector that delivers convenient entertainment in nearly any room. With a built-in battery and over 30,000 hours of operational life, this projector will deliver years of multimedia entertainment wherever it goes. Weighing less than two pounds, the M1's compact and lightweight design makes it ideal for moving from room to room, or for indoor/outdoor usage. An integrated smart stand provides for simple 360-degree setup, while also doubling as a lens cover. Once the lens is uncovered, the projector automatically powers on with full brightness for instant entertainment. A built-in safety feature temporarily turns off the lens when objects are detected too close to the projector. Dual Harman Kardon speakers provide crisp and clear sound for multimedia content, while a short throw lens can display large images in small spaces. What's more, versatile connectivity options include a MicroSD card slot, USB Type-A, and USB Type-C - making the M1 a great option for sharing and displaying videos and other multimedia content. Advanced LED Light Source This projector uses the latest solid-state LED technology that is both mercury-free and lamp-free, offering a greener, filter-free projector solution. The LED light source provides over 30,000 hours of usage while consuming less than half the power of a typical LCD TV, thereby lowering your total cost of ownership. 360° Projection with Smart Stand The integrated Smart Stand provides for simple 360-degree setup, allowing the projector to be placed in different positions at nearly any angle. The Smart Stand also doubles as a lens cover that automatically turns off the projector when closed, and automatically powers on the projector when open. Dual Harman Kardon Speakers Integrated Harman Kardon Speakers deliver powerful performance in a small package. These speakers produce deep, loud, 360-degree room-filling sound perfect for music and movies at home, or on the go. USB Type-C for Video and Power A USB Type-C port delivers fast data, audio, video and quick charging over a single cable. Hours of Entertainment For entertainment on the go, a built-in battery provides up to 6 hours of power so you can watch movies and share videos without the hassle of wires or cables. And thanks to 16GB of internal storage, you can enjoy up to 4,000 songs and up to 4 hours of movies.

Welcome! For sale is Electro-Voice CPS4.10 apmlifier with 4 channels of each nominal output is 1000W. MSRP: 3200 US$ Amplifier was never used (just tested before i made this listing) and it is 100% operational. See more technical details below. Shipping We will ship to any location worldwide. Please send us message for shipping cost to your location. All customs fees are not included in the international shipping costs. Buyer is responsible for all customs fees.  Please contact us if you have any question regarding this item.  CPS4.10 This four-channel CPS amplifier from Electro-Voice features groundbreaking Class-D technology for maximum amp efficiency and minimized heat dissipation in 19-inch racks. Each channel individually provides transformerless, switchable output characteristics, which enable specific channels to achieve maximum drive. Power into 2 Ohms, 4 Ohms, 70V, or 100V line – no transformers are required. In Hi-Z operation (70V or 100V), a 50 Hz high-pass filter (HPF) provides protection against loudspeaker transformer saturation. Additionally, amplifier channels can be bridged in pairs for double output power. Each contractor-friendly, multi-channel CPS amplifier also features Phoenix-type connectors for inputs and outputs, pre-programmable power-on delay, easy power-on remote via contact closure, and rear level controls. A module slot for the RCM-810 remote control module provides control network functionality, allowing for remote system diagnostics and control via IRIS-Net software. In addition, using the RCM-810’s Variable Load Drive feature can tailor the amplifier’s output power to match every load from 2 Ohms up to 10 Ohms in steps of 0.1 Ohms. Features: - Class-D design for high-efficiency and low heat dissipation - Flexible matching for Low-Z and High-Z applications - Optional remote control via IRS-Net - Four-channel design in 2RU chassis Specifications: - Maximum Midband Output Power (THD=1%, 1kHZ): 4 x 1000W @ 2 ohms 4 x 1000W @ 4 ohms 4 x 1000W @ 70V 4 x 1000W @ 100V - Rated Output Power (THD 4 x 900W @ 2 ohms 4 x 900W @ 4 ohms 4 x 900W @ 70V 4 x 900W @ 100V  - Maximum Bridged Output Power (THD=1%, 1kHz) 2 x 2000W @ 4 ohms 2 x 2000W @ 8 ohms 2 x 2000W @ 140V 2 x 2000W @ 200V - Maximum RMS Voltage Swing (THD=1%, 1kHz, per channel): 100V - Power Bandwidth (THD=1% ref.1kHz, half power @ 4 ohms load): 10Hz-25kHz, 50Hz-25kHz  - Voltage Gain, ref. 1kHz: 32 dB (2ohm/4ohm mode), 33dB (70V mode), 36dB (100V mode)  - THD at rated output power (MBW=80kHz, 1kHz): - IMD-SMPTE, 60Hz, 7kHz: - DIM30, 3.15kHz, 15kHz: - Maximum Input Level: +21dBu - Crosstalk, ref. 1kHz at rated output power: - Frequency Response, ref. 1kHz: 10Hz-30kHz (+/-1dB) - Input Impedance, active balanced: 20k ohms - Damping Factor, 1khz, 8 ohms: >240 - Slew Rate: 28V/us - Output Noise, A-weighted: - Output Stage Topology: Class D - Power Consumption, 1/8 max. output power @ 4 ohms: 840W - Power Requirements: 220-240V, 50-60Hz or 120V, 50-60Hz or 100V, 50-60Hz - Protections: Audio Limiters, Temperature, DC, HF Short Circuit, Peak Current Limiters, Inrush Current Limiters, Turn-on Delay - Cooling: Front-to-rear, continuously variable fans - Ambient Temperature Limits: 40 to 105 deg. F - Safety Class: I - Dimensions (W x H x D): 19" x 34.7" x 16.6" - Weight: 24.6 lbs - Optional Accessories:  2-way internal X-Over cards, 24dB, LR, XHP-5 for 500Hz/XHP-8 for 800Hz RCM-810 IRIS-Net Control & Supervision Module Rear-Rackmount Kit RMK-15

RTW TouchMonitor TM7-Studio Desktop Audio Meter STUDIO & TABLE TOP VERSION - 8 analog inputs balanced (D-Sub) - 8 digital inputs + 8 digital outputs (4 x AES3 In, 4 x AES3 Out, D-Sub) 7" Desktop TouchMonitor Audio Meter for Audio Production and Post Production The RTW TouchMonitor TM7-Studio is a 7 inch desktop audio meter with a 16:9 TFT touch screen display designed for audio production and post production. TM7-Studio features 8 channel digital AES3-format I/O and 8 channel analog inputs both via D-sub 25p-f. Also includes VGA video signal output, RJ-45 Ethernet connectivity, 2 USB 2.0 ports, a GPIO port and a 24 V DC interlocking power connector Binder 710 type. Comes with Basic Software but a variety of optional software modules are available to expand feature set. Installed software licenses:SW20001: Multichannel ModeThis module expands the signal routing to Mono, Stereo, 5.0 Surround, 5.1 Surround, 7.1 Surround and Multichannel (2 to 8 channels in one block, up to 2 blocks). SW20002: Loudness and SPL DisplayThis module expands the basic stereo PPM with Loudness measuring functions as described in EBU R128, ITU-R BS.1770-3/1771, ATSC A/85, and ARIB guidelines, and the LRA instrument for the graphical display of the Loudness Range. A customer-specific mode allows the user to modify parameters. In addition the module provides the SPL display mode with various weighting filters and integration times as well as reference level adjust to calculate an SPL value from an electrical signal. For signals with more than two channels software module SW20001 is required. SW20003: RTA - Real Time AnalyzerThis module provides on 31 bands a spectral distribution display for single channels, channel pairs or groups plus HP HF band. For signals with more than two channels software module SW20001 is required. SW20004: SSA - Surround Sound Analyzer--- Precondition: Software module SW20002 is already installed! --- This module is a powerful tool for visualizing the interaction of all important parameters of surround signals. The dynamic behavior of all display elements (House display) corresponds to the subjective listening impression, enabling you to see the balance of a surround programme intuitively and at a glance. For signals with more than two channels software module SW20001 is required. SW20005: Radar Display--- Precondition: Software module SW20002 is already installed! --- This module provides a high resolution circular Loudness display for Momentary values and history, enhanced with numerical display of measuring time and two descriptors. The Radar Display equals the Loudness Radar Meter of TC Electronic®. For signals with more than two channels software module SW20001 is required.

Event EZbus MIXER 8 Channel USB Audio Interface/ Stand Alone-Digital Mixer Board MIXER DIGITAL STUDIO EVENT EZBUS  TRES BON ETAT GENERAL  VENDU SANS NOTICE Product Description As a stand-alone Digital Mixer, it provides 8 main input channels (four of which provide 3 inputs each), plus a USB port, 2 S/PDIF coaxial Inputs, one output, and S/PDIF/ADAT-format optical I/O. Main input channels provide dynamics processing and 4-band EQ. Any input (analog OR digital) may be routed to ANY mixing channel (the same applies to the 4 returns) and you can even mix signals with different sample rates - up to 96K! Other I/Os include dual MIDI I/Os, Word Clock Out, and 2 Sends plus 2 Aux Outs, making it an ideal Hard Disk Recording Interface.  One button push is all it takes to instantly transform EZbus into a customizable Control Surface with support for major software programs. You could see a product like this on the horizon but it took the ingenious minds of Event Electronics to actually deliver. The EZbus mix engine architecture provides 8 primary channels, each of which offers EQ and dynamics processing. The 8 channels can be fed from any hardware input, analog or digital. A channel's signal can be routed to multiple destinations, including the Main Mix bus, the Alt Mix bus, and any or all of the 4 Sends; these, in turn, can be routed to a variety of hardware outputs. The EZbus also has 4 Return busses, which can function as additional input channels. This provides you with a total of 12 input channels, 8 of which support EQ and dynamics processing. In a typical computer-based recording environment, many of the audio sources (keyboards, sound modules, drum machines, effects devices, and the like) require little or no processing "after the fact;" that is, they don't necessarily need to have their tone, volume, or pan positions controlled at the mixer level. Rather, these functions can be performed by the device itself via internal settings or in response to MIDI commands. In that scenario, all that's required of the mixer is that it provide a means for the audio from the device to be brought into the main mix. The EZbus was designed to accommodate a large number of audio sources, not all of which would necessarily need to have their individual tone, volume, and pan positions controlled at the mixer level. On EZbus analog inputs 5, 6, 7, and 8, three input jacks (labeled A, B, and C) are provided for each input. The 3 jacks in each channel are summed (and electronically buffered), allowing you to connect up to 3 audio sources to a single input. You could, for example, bring the signals from 6 synthesizers into inputs 5A, 5B, 5C, 6A, 6B, and 6C. You could then bring the stereo returns from three outboard effects devices, for example, into inputs 7A and 8A for effect #1, 7B and 8B for effect #2, and 7C and 8C for effect #3. Altogether, that's 12 audio signals brought into the EZbus using only 4 audio channels. Through the analog inputs, you can bring 16 signals into the EZbus; 4 additional signals from the digital inputs can be routed to the Mix bus or Alt bus via the 4 "virtual" returns. In this manner, you can bring a total of 20 signals into the EZbus. At a minimum, you can bring 8 signals into the EZbus, each of which can be independently processed with EQ and dynamics. These signals can be from either analog or digital sources. Let's presume you're a solo performer doing a nightclub gig. You would likely have an assortment of sound modules, possibly a keyboard, a drum machine, some effects devices, your vocal mic, and, versatile musician that you are, an acoustic or electro-acoustic guitar. Your vocal mic would plug into analog input #1. Your guitar would go into analog mic input #2 (or instrument input #3 if it's electro-acoustic) Your drum machine could go into analog inputs #3 and #4 (presuming you want to run in stereo). Let's say you have 3 MIDI sound modules and you also want to run the

The Audio-Technica AT-MX381 is an eight-channel mic/line mixer with automatic switching features for conferences, meetings, boardrooms, teleconferencing, TV and radio broadcasts, etc. An internal microprocessor provides automated channel switching for seamless, noise-free operation. Each channel features a priority select switch that enables one channel at a time operation, all active, or any mix of moderator override. The input and output connections feature terminal-block connections and a direct output is available for each input connection. Balanced and unbalanced outputs are provided for convenient integration with professional and consumer equipment. An RS232 data port provides a connection point for a PC with included SmartMixer Software. The AT-MX381 is a professional, hands-free solution for businesses, houses-of-worship or anyone requiring automated switches during real time discussion and speech. Eight Automated Inputs The eight mic/line switchable inputs seamlessly switch between talkers for hands free automated operation. Automated Threshold Setting An adjustable threshold determines the signal level that triggers channel switching. RS232 and SmartMixer Software An RS232 data port provides a connection point for a PC with included SmartMixer Software. The AT-MX381 is Compatible with Crestron and AMX systems. External control capability enables the SmartMixer to activate other devices. Flexible Output Section The input and output connections feature terminal-block connections and a direct output is available for each input connection. Balanced and unbalanced outputs are provided for convenient integration with professional and consumer equipment. Built In Limiters Each channel features a limiter for controlling signal peaks and distortion. Assignable Priority Switches All channels feature a priority select switch that enables one channel at a time operation, all active, or any mix of moderator override.

Io Express delivers compact, powerful I/O for PC or Mac, laptop or desktop, in the field, in the studio, or wherever your work takes you. Io Express is the perfect Mac or PC interface for anyone who needs a quality portable monitoring and mastering solution when working with Final Cut Pro X, Avid Media Composer/Symphony/Newscutter, Adobe Creative Suite, and more. Rugged and portable, Io Express delivers desktop-level functionality that's powerful enough to deliver in the edit suite, but sturdy and portable enough to handle life in the field. With support for a wide range of analog and digital HD/SD video and audio I/O, and broadcast-quality HD to SD down-conversion, Io Express fits into any workflow with ease. Compatible with PC or Mac, Io Express can be connected via PCIe card or ExpressCard interfaces, offering the flexibility to work on any platform, in the software of your choice. Powerful connectivity Io Express provides a wide variety of formats, frame rates and video/audio sources for the connectivity you need. For digital video, Io Express features HDMI 1.3a I/O plus 3G/HD/SD-SDI I/O. In addition there are connections for Genlock or LTC input and a loop-through output, and component SD/HD analog video output. The high-quality deep color HDMI input and output provides complete color representation when you need it, while allowing you to interface with HDMI camcorders and HD monitors. Io Express also offers support for both 8-channel HDMI and SDI embedded digital audio or 2 channels of unbalanced analog audio via two RCA connectors. For multi-channel audio mastering, the 8-channel SDI embedded 24-bit 48kHz audio provides pristine quality. Software compatibility Io Express gives creative professionals the freedom to work with the software of their choice. Just some of the supported applications include: Mac OSX:  Apple Final Cut Pro X, Avid Media Composer, Adobe Premiere Pro*, Adobe After Effects*, Adobe Photoshop* and more. Windows 7:  Adobe Premiere Pro*, Avid Media Composer, Adobe After Effects*, CineForm New 3D, Adobe Photoshop*, CineForm Neo HD,  Eyeon Fusion 64 bit, Autodesk Combustion *via AJA plug-in Integrated AJA down-conversion Featuring full 10-bit, broadcast-quality HD to SD hardware down-conversion and automatic HD/SD 12-bit component analog output, Io Express offers conversion flexibility all the time -- during ingest or playback. Tech Specs Video Formats ? (HD) 1080i 25, 29.97, 30 ? (HD) 1080PsF 23.98, 24 ? (HD) 1080p 23.98, 24, 25, 29.97, 30 ? (HD) 720p 50, 59.94, 60 ? (SD) 625i 25 ? (SD) 525i 29.97 Video Input ? SD/HD SDI, SMPTE-259/292/296/424, 8 or 10-bit ? Single Link 4:2:2 (1 x BNC) ? HDMI v1.3 Video Output Digital ? SD/HD SDI, SMPTE-259/292/296/424, 8 or 10-bit ? Single Link 4:2:2 (1 x BNC) ? HDMI v1.3 Video Output Analog ? Composite/S-Video (Y/C) (1 x BNC) ? NTSC, NTSCJ, PAL ? Component (3 x BNC) ? HD: YPbPr, RGB ? SD: YPbPr, RGB (component mode) ? SMPTE/EBU N10, Betacam 525 line, Betacam 525J, RGB ? 12-bit D/A, 8 x oversampling ? +/-.2 dB to 5.0 mHz Y frequency response ? +/-.2 dB to 1 mHz C frequency response ?.5% 2T pulse response ? ? ? Audio Input Digital ? 8-Channel, 16- and 24-bit SMPTE-259 SDI embedded audio, 48 kHz sample rate, synchronous ? 8-Channel, 16 and 24-bit HDMI embedded audio, 48 kHz sample rate, synchronous Audio Output Digital ? 8-Channel, 16 and 24-bit SMPTE-259 SDI embedded audio, 48 kHz sample rate, synchronous ? 8-Channel, 16 and 24-bit HDMI embedded audio, 48 kHz sample rate, synchronous Audio Output Analog ? 2-Channel 16- and 24-bit unbalanced audio (via RCA jack) Reference Input or LTC Input ? 1 x BNC assignable to Reference video or LTC input Reference ? Analog Color Black (1V) or Composite Sync (2 or 4V) ? Nonterminating Electrical Interface ? PCI Express x1 ? ExpressCard/34 Machine Control RS-422, Sony 9-pin protocol 9-pin D-connector pinout is as follows: 1 GND 2 RX- 3 TX+ 4 GND 5 No Connection 6 GND 7 RX+ 8 TX- 9 GND Shell GND Size (w x d x h) ? 8.74" x 7.09" x 1.65" (222mm x 180mm x 42mm) Weight ? 1.5 lbs (0.7 kg) Power ? 12-18V, 11-13W Environment ? Safe Operating Temperature: 0 to 40 degrees C (32 to 104 degrees F) ? Safe Storage Temperature (Power OFF): -40 to 60 degrees C (-40 to 140 degrees F) ? Operating Relative Humidity: 10-90% noncondensing ? Operating Altitude:

Description La marque vous parle Fiche technique Questions / Réponses XGIMI MOGO est un projecteur lumineux de grande qualité avec 210 lumens et une résolution de 1080p. Vous pouvez télécharger plus de 5000 applications et utiliser les connectivités WiFi et Bluetooth.Origine: Chine Livraison gratuite ! DISCOVER... XGIMI MOGO4K resolutionXGIMI MOGO provides 210 lumens with a 4K reso Voir toute la description HDMI HDMI Réseau sans fil Réseau sans fil Marque Xgimi Voir toute la fiche technique 748,74 €   € Qu’est-ce que l’éco-participation ? Le prix de cet article inclut l’Eco-participation. L’éco-participation correspond à la contribution financière du consommateur à la collecte, à la réutilisation et au recyclage des équipements électriques et électroniques et des meubles en fin de vie. Son montant est déterminé selon le produit et son type de traitement (pour la DEEE) et selon un barème en fonction du type de meuble et de son poids (pour l’éco-participation sur le mobilier). Pour l’éco-participation sur les équipements électriques et électroniques: Les équipements informatiques: Ordinateurs, imprimantes, claviers… Les équipements de télécommunication: téléphones, fax,répondeurs… Les équipements images et sons: chaînes hifi, caméscopes… Les jouets et équipements de loisirs et sport: consoles dejeux, trains ou voitures électriques… Les sources lumineuses à collecte et recyclage spécifique: lampes à économie d’énergie, néons… L’électroménager: machines à laver, réfrigérateurs, tables de cuisson… Dans le cadre de l’achat d’un appareil électrique et électronique neuf, vous pouvez nous restituer gratuitement votre ancien appareil. Dans un délai de 7 jours suivant le passage de votre commande, connectez-vous à votre espace client, et dans la section "Retourner un produit", sélectionnez "Reprendre mon ancien matériel". Pour l’éco-participation sur le mobilier : Les meubles de salon/séjour/salle à manger, Les meubles d’appoint, Les meubles de chambre à coucher, La literie, Les meubles de bureau, Les meubles de cuisine, Les meubles de salle de bains, Les meubles de jardin, Les sièges, Le mobilier technique, commercial et de collectivité... Participons au recyclage et à la revalorisation des équipements électroniques et électriques et des meubles en fin de vie. En savoir +. Ou 3 fois 255,32€ (avec frais) avec Cofidis Livré chez vous à partir du 28/11/2021 Livraison Offerte Détail des modes de livraison × Modes de livraison Domicile5 Livré entre le 28/11/2021 et 30/11/2021 Livraison gratuite en stock 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Je fonce Ce produit n'est pas disponible, notre équipe fait le maximum pour qu'il le soit bientôt. Inscrivez-vous pour être tenu au courant. Créer une alerte Produit neuf Vendu et expédié par Onefantasticshop 0 avis 1 Neuf à partir de 748,74 € × Autres offres TOUT NEUF SECONDE VIE 748,74 € Onefantasticshop - Neuf Livraison gratuite 748,74 € Onefantasticshop - Neuf Livraison gratuite Il n'y a actuellement aucune offre d'occasion pour ce produit. Service Pack reprise offert Reprise à 598,99€ soit 80% de sa valeur à l'achat pendant 1 an*. *Retournez, pendant 1 an, votre produit éligible au Pack REPRISE en état de fonctionnement. Bénéficiez d'un bon d'achat correspondant à 80% du prix TTC facturé au moment de l'achat, soit 598,99€ pour un prix à l'achat facturé 748,74€. A réception, il sera utilisable pendant 3 mois sur les produits vendus par Rue du Commerce (hors Marketplace). Votre produit sera repris, reconditionné et revendu par notre partenaire. Voir les conditions 2021-11-18 23:48:32 Publicité Description La marque vous parle Fiche technique Avis clients Questions / Réponses Description - Vidéoprojecteurs portables - Xgimi - Mini Projecteur XGIMI MOGO résolution 4K, Portable 150 ou 200 Lumens, Batterie 10400 mAh, Couleur Gris Points forts Xgimi Mini Projecteur XGIMI MOGO résolution 4K, Portable 150 ou 200 Lumens, Batterie 10400 mAh, Couleur Gris DISCOVER... XGIMI MOGO 4K resolution XGIMI MOGO provides 210 lumens with a 4K resolution. XGIMI MOGO provides high quality and bright images with vivid color. It has a broad connectivity and direct casting contents to 100'' screen from your Android or iOS device, Mac, Windows computer or Chromebook. XGIMI MoGo projects way more colorful, brighter and sharper images compared to other 150 or 200 lumens portable projectors in the market. Android 9.0 system Thanks to the Android TV 9.0. system, you can download more than 5000+ apps directly from Google Play Store to search contents with Google Assistant and voice control your smart home with MOGO. You can mirror or screencast through cell phones. The MoGo is powered by Harman-Kardon, offering fantastic sound quality with its advanced dual 3-Watt speaker units. MoGo works with the Google Play Store for Android TV. Great autofocus XGIMI has an exclusive instant 10000+ points autofocus function that makes every corner clear, not just focusing the middle of the image. The 40+ degree four corner keystone correction allows you side projection to the ceiling. The 10400 mAh built-in battery allows you to take the projector anywhere you want to enjoy a huge screen. Users can watch up to 2-hour playtime or listen to 8 hours of music on a one-time charge. With high brightness, very good data and video image quality and a solid set of connection choices, MoGo could turn your living room to a cinema.

The CT4150, part of the ComTech DriveCore series from Crown Audio, is a 4-channel power amplifier that offers professional audio quality in a slim design. The amplifier has a 1RU chassis, allowing you to install it in any standard equipment rack. It provides 125W per channel into 8 ohms for strong, clear audio with low distortion. DriveCore technology provides excellent efficiency of over 90% for a fantastic performance to power ratio. It does not require a cooling fan, providing silent operation. The amplifier offers flexible input routing, allowing you to send an input signal to any of the 4 outputs. Integrated Life-Safety features and patented feedback and protection circuitry protect the amplifier from damage to ensure a lifetime of reliable operation. A universal power supply lets you use the amplifier internationally, ideal for touring applications. Features: Slim 1RU chassis can be installed in any standard equipment rack Delivers 125W per channel into 8 ohms for strong, clear audio with low distortion DriveCore technology provides excellent efficiency of over 90% for a fantastic performance to power ratio No cooling fan required, providing silent operation Flexible input routing allows you to send an input signal to any of the 4 outputs Integrated Life-Safety features and patented feedback and protection circuitry protect the amplifier from damage to ensure a lifetime of reliable operation A universal power supply lets you use the amplifier internationally, ideal for touring applications

TEKTRONIX VITS 201 INSERTION GENERATOR PAL ******************************** DESCRIPTION NON CONTRACTUEL: Analog Generator VITS201 Features & Benefits - Digital Composite Signal Generation - CCIR, EBU, UK National ITS - Operates in the Presence of Sound in Syncs - Four External ITS Inputs - Source Identification - Program Line Sync and Burst Regeneration - Loss of Program Input Modes: - External Input to Program Out - Internal Generator to Program Out - Program Line Bypass - User Programmable Text Generator Provides: - Message in Program Line Vertical Interval - Message in Active Picture Area for Loss of Program Input Modes - User Programs for: - Insertion of Internal, External, and Source Identification Signals - Loss of Program Input Modes Text Insertion - All User Program Settings Saved in Nonvolatile Storage - Monitor Output - Remote Control Applications - VITS Insertion for Broadcast Video Applications The VITS201 is a low cost, high quality ITS generator and inserter/deleter with features found only in the most expensive transmission grade ITS inserters. In addition to a solid basic generator/inserter unit, the VITS201 provides loss of program continuity modes, multiple inputs for external data insertion, source identification, a text generator for message insertion and a versatile programmer with nonvolatile memory storage for setting up the unit's operation and loss of program modes. Test Signal Generator The VITS201 uses digital signal generation and a precision 12-Bit DAC to ensure signal accuracy and long term stability. Digital generation of the composite signal with conversion to analog using a single DAC ensures accurate chrominance-to-luminance gain and timing. The VITS201 generates the following signals: - CClR 17, 18, 330 and 331 - U.K. National - GCR - 75% color bars - Sin (x)/x - Luminance ramp - 0% and 100% luminance levels Inserter/Deleter Functions The VITS201 may be programmed to insert any internally generated signal, external input, or the source identification signal on any line from 7 through 30 and 319 through 343. If desired, the same signal or external input may be programmed for insertion on multiple lines. This may be useful in insertion of teletext and other data signals. Four external ITS inputs are provided for insertion of externally generated test and data signals. All inputs are AC coupled and clamped. The VITS201 assumes the external input signals are locked to the program signal and correctly timed. Delete and pass functions are available for the same lines as the insert function. Program Channel Maintaining transparency and continuity of the program channel is a prime consideration in the VITS201. Distortions and transients are virtually eliminated by the Tektronix developed channel switch integrated circuit. Insertion or deletion of ITS can occur only when genlock to the program input signal is attained. Loss of mains power or genlock causes the program line to be bypassed. Program signal delay in operate and bypass is matched. The VITS201 provides for replacement of the program line sync and burst signals with the internally generated sync and burst signals. This ensures the proper amplitude relationship of the inserted ITS to the sync and burst signals is established prior to inputting the signal to the broadcast transmitter or transmission system. Timing of the active video to the blanking interval is not affected in the sync and burst regeneration mode. Loss of the program input signal will automatically enable one of three program line output states: - Program line bypassed - A user selected external input will be routed to the program line output - A user selected internally generated signal will be routed to the program line output When an internally generated signal is selected, a message may be superimposed over the active picture area. The

Description La marque vous parle Fiche technique Questions / Réponses XGIMI MOGO est un projecteur lumineux de grande qualité avec 210 lumens et une résolution de 1080p. Vous pouvez télécharger plus de 5000 applications et utiliser les connectivités WiFi et Bluetooth.Origine: Chine Livraison gratuite ! DISCOVER... XGIMI MOGO4K resolutionXGIMI MOGO provides 210 lumens with a 4K reso Voir toute la description HDMI HDMI Réseau sans fil Réseau sans fil Marque Xgimi Voir toute la fiche technique 688,94 €   € Qu’est-ce que l’éco-participation ? Le prix de cet article inclut l’Eco-participation. L’éco-participation correspond à la contribution financière du consommateur à la collecte, à la réutilisation et au recyclage des équipements électriques et électroniques et des meubles en fin de vie. Son montant est déterminé selon le produit et son type de traitement (pour la DEEE) et selon un barème en fonction du type de meuble et de son poids (pour l’éco-participation sur le mobilier). Pour l’éco-participation sur les équipements électriques et électroniques: Les équipements informatiques: Ordinateurs, imprimantes, claviers… Les équipements de télécommunication: téléphones, fax, répondeurs… Les équipements images et sons: chaînes hifi, caméscopes… Les jouets et équipements de loisirs et sport: consoles de jeux, trains ou voitures électriques… Les sources lumineuses à collecte et recyclage spécifique: lampes à économie d’énergie, néons… L’électroménager: machines à laver, réfrigérateurs, tables de cuisson… Dans le cadre de l’achat d’un appareil électrique et électronique neuf, vous pouvez nous restituer gratuitement votre ancien appareil. Dans un délai de 7 jours suivant le passage de votre commande, connectez-vous à votre espace client, et dans la section "Retourner un produit", sélectionnez "Reprendre mon ancien matériel". Pour l’éco-participation sur le mobilier : Les meubles de salon/séjour/salle à manger, Les meubles d’appoint, Les meubles de chambre à coucher, La literie, Les meubles de bureau, Les meubles de cuisine, Les meubles de salle de bains, Les meubles de jardin, Les sièges, Le mobilier technique, commercial et de collectivité... Participons au recyclage et à la revalorisation des équipements électroniques et électriques et des meubles en fin de vie. En savoir +. Ou 3 fois 234,93€ (avec frais) avec Cofidis Livré chez vous à partir du 28/07/2022 Livraison Offerte Détail des modes de livraison × Modes de livraison Livraison standard à domicile Livré entre le 28/07/2022 et 30/07/2022 Livraison gratuite en stock 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Je fonce Ce produit n'est pas disponible, notre équipe fait le maximum pour qu'il le soit bientôt. Inscrivez-vous pour être tenu au courant. Créer une alerte Produit neuf Vendu et expédié par Onefantasticshop 0 avis 1 Neuf à partir de 688,94 € × Autres offres TOUT NEUF SECONDE VIE 688,94 € Onefantasticshop - Neuf Livraison gratuite 688,94 € Onefantasticshop - Neuf Livraison gratuite Il n'y a actuellement aucune offre d'occasion pour ce produit. Besoin d'aide pour votre achat ? Appelez-nous: du lundi au vendredi de 9h à 20h et le samedi de 9h à 18h (hors jours fériés). 2022-07-16 12:25:24 Publicité Description La marque vous parle Fiche technique Avis clients - Les avis sont publiés et conservés pendant une durée de cinq ans ; - Les avis publiés font l'objet d'une modération depuis la plateforme Avis Vérifiés labellisée AFNOR garantissant - l'authenticité et la transparence des avis publiés (positifs ou négatifs) ; - Les avis ne sont pas modifiables: si un client souhaite modifier son avis, il doit contacter notre partenaire Avis Vérifiés afin de supprimer l'avis existant, et en publier un nouveau"> Questions / Réponses Description - Vidéoprojecteurs portables - Xgimi - Mini Projecteur XGIMI MOGO résolution 4K, Portable 150 ou 200 Lumens, Batterie 10400 mAh, Couleur Gris Points forts Xgimi Mini Projecteur XGIMI MOGO résolution 4K, Portable 150 ou 200 Lumens, Batterie 10400 mAh, Couleur Gris DISCOVER... XGIMI MOGO 4K resolution XGIMI MOGO provides 210 lumens with a 4K resolution. XGIMI MOGO provides high quality and bright images with vivid color. It has a broad connectivity and direct casting contents to 100'' screen from your Android or iOS device, Mac, Windows computer or Chromebook. XGIMI MoGo projects way more colorful, brighter and sharper images compared to other 150 or 200 lumens portable projectors in the market. Android 9.0 system Thanks to the Android TV 9.0. system, you can download more than 5000+ apps directly from Google Play Store to search contents with Google Assistant and voice control your smart home with MOGO. You can mirror or screencast through cell phones. The MoGo is powered by Harman-Kardon, offering fantastic sound quality with its advanced dual 3-Watt speaker units. MoGo works with the Google Play Store for Android TV. Great autofocus XGIMI has an exclusive instant 10000+ points autofocus function that makes every corner clear, not just focusing the middle of the image. The 40+ degree four corner keystone correction allows you side projection to the ceiling. The 10400 mAh built-in battery allows you to take the projector anywhere you want to enjoy a huge screen. Users can watch up to 2-hour playtime or listen to 8 hours of music on a one-time charge. With high brightness, very good data and video image quality and a solid set of connection choices, MoGo could turn your living room to a cinema.

L'équip support tv mural 650106 13 42 de la marque Equip est un support idéal pour accrocher votre téléviseur sur un mur sans l'utiliser d'un tabouret ou d'un support classique. Ce support est conçu pour une téléviseur de taille moyenne et pèse seulement 2,3 kg, ce qui le rend facile à manipuler. Il est constitué d'une structure en acier robuste et stabilisée par des vis de prélèvement, ce qui garantit une solidité et une résistance à l'usure. Le support est également équipé d'un système de réglage de l'angle et de la hauteur pour une positionnement parfait de votre téléviseur, ce qui vous offre une vision optimale et confortable. Il dispose également d'une surface de fixation plastique anti-usure et anti-dérapante, ce qui permet de maintenir votre appareil sûr et stable sur le mur. Le support est facilement installable, car il ne nécessite pas de drillage et peut être fixé avec des vis de prélèvement standard. Il est également livré avec des vis de fixation supplémentaires et un kit de montage complet. Grâce à son design minimaliste et sleek, ce support équipe votre téléviseur en le faisant disparaitre parfaitement dans votre décor. Il est disponible en noir et est certifié CE et RoHS conforme. Achetez l'équip support tv mural 650106 13 42 pour améliorer votre expérience de visionnage télé et donner à votre pièce un look moderne et élégant. (533 mots) Equip is a well-known brand in the audio-video accessories market. The Equip support tv mural 650106 13 42 is an ideal solution for mounting your medium-sized TV on a wall without the need for a table or a traditional stand. This support weighs only 2.3 kg, making it easy to handle. It is made of a robust steel structure stabilized by screw anchors, ensuring both stability and resistance to wear. The support also features an adjustable angle and height system, allowing for perfect positioning of your TV for optimal and comfortable viewing. It has a non-slip and wear-resistant plastic surface for holding your device securely on the wall. The support is easy to install, as it does not require drilling and comes with additional mounting screws and a complete installation kit. Its minimalist and sleek design allows your TV to blend seamlessly into your décor. Available in black, this support is CE and RoHS certified. Upgrade your TV viewing experience and modernize your room with the Equip support tv mural 650106 13 42. (362 words) This product is a wall-mount TV support from Equip, a reputable brand in the audio-video accessories industry. It's perfect for mounting medium-sized TVs without the need for a table or a traditional stand. Weighing just 2.3 kg, this support is lightweight and easy to handle. Its sturdy steel structure, reinforced by screw anchors, ensures durability and resistance to wear. The support offers an adjustable angle and height system, enabling perfect positioning of your TV for optimal viewing and comfort. Its non-slip, wear-resistant plastic surface protects your device from damage while keeping it securely in place on the wall. The installation process is straightforward, as no drilling is required. The package includes additional mounting screws and a complete installation kit. This support's minimalist design complements any décor, making it available in black and CE and RoHS certified. Upgrade your TV viewing experience and revamp your room's look with the Equip support tv mural 650106 13 42. (307 words) This Equip support tv mural 650106 13 42 is a versatile and practical accessory for mounting a medium-sized TV on a wall. Weighing only 2.3 kg, it's a breeze to install and maneuver. Its sturdy steel structure, secured by screw anchors, provides stability and durability. This support features an adjustable angle and height system, ensuring a customized viewing experience. Its anti-slip and wear-resistant plastic surface safeguards your TV from damage and keeps it in place on the wall. The installation process is hassle-free, as no drilling is required. The support comes with extra mounting screws and a complete installation kit. With its sleek design and availability in black, this CE and RoHS certified accessory is a must-have for modernizing your room and enhancing your TV viewing experience. (292 words) The Equip support tv mural 650106 13 42 is a wall-mount TV support designed for medium-sized TVs. It's a practical and stylish alternative to traditional stands, weighing just 2.3 kg for easy handling. Its robust steel structure, secured by screw anchors, ensures stability and durability. This support offers an adjustable angle and height system, enabling a customized viewing experience. Its non-slip, wear-resistant plastic surface protects your TV from damage and keeps it in place. Installation is a breeze, as no drilling is required. The package includes additional mounting screws and a complete installation kit. This sleek, black accessory is CE and RoHS certified and is a great addition to any modern living space, enhancing your TV viewing experience. (239 words) The Equip support tv mural 650106 13 42 is a wall-mount TV support that makes it simple to hang a medium-sized TV without the need for a table or a traditional stand. Weighing only 2.3 kg, this support is lightweight and easy to maneuver. Its strong steel structure, secured by screw anchors, ensures stability and durability. This support offers an adjustable angle and height system, allowing for a customized viewing experience. Its non-slip, wear-resistant plastic surface safeguards your TV from damage and keeps it in place on the wall. Installation is hassle-free since no drilling is required, and the package includes additional mounting screws and a complete installation kit. This sleek accessory, available in black and CE and RoHS certified, is a must-have for modernizing your room and optimizing your TV viewing experience. (235 words) Equip support tv mural 650106 13 42 is a versatile and modern accessory for mounting medium-sized TVs on a wall. Weighing just 2.3 kg, it's easy to handle and install. Its robust steel structure, secured by screw anchors, ensures stability and durability. This support offers an adjustable angle and height system, enabling a customized viewing experience. The non-slip, wear-resistant plastic surface protects your TV from damage and keeps it securely in place on the wall. The installation process is straightforward, as no drilling is required, and the package includes additional mounting screws and a complete installation kit. Available in black and CE and RoHS certified, this accessory is a perfect addition to any modern living space and enhances your TV viewing experience. (205 words) Equip support tv mural 650106 13 42 is a wall-mount TV support that offers a contemporary and practical solution for hanging medium-sized TVs. Weighing only 2.3 kg, it's easy to install and maneuver. Its sturdy steel structure, secured by screw anchors, ensures stability and durability. This support features an adjustable angle and height system, enabling a customized viewing experience. Its non-slip, wear-resistant plastic surface safeguards your TV from damage and keeps it in place on the wall. The installation process is hassle-free, as no drilling is required, and the package includes additional mounting screws and a complete installation kit. This sleek, black accessory is CE and RoHS certified and is a must-have for modernizing your room and optimizing your TV viewing experience. (192 words) The Equip support tv mural 650106 13 42 is a practical and stylish wall-mount solution for medium-sized TVs, weighing just 2.3 kg for easy installation and maneuverability. Its robust steel structure, secured by screw anchors, guarantees stability and durability. This support provides an adjustable angle and height system, ensuring a customized viewing experience. The non-slip, wear-resistant plastic surface protects your TV from damage and keeps it securely on the wall. The installation process is straightforward, as no drilling is required, and the package includes additional mounting screws and a complete installation kit. Available in black and CE and RoHS certified, this accessory is a must-have for modernizing your room and enhancing your TV viewing experience. (184 words) The Equip support tv mural 650106 13 42 is a sleek and practical wall-mount TV support designed for medium-sized TVs. Weighing only 2.3 kg, it's easy to install and maneuver. Its sturdy steel structure, secured by screw anchors, ensures stability and durability. This support offers an adjustable angle and height system, enabling a customized viewing experience. Its non-slip, wear-resistant plastic surface protects your TV from damage and keeps it in place. Installation is hassle-free, as no drilling is required, and the package includes additional mounting screws and a complete installation kit. This black accessory is CE and RoHS certified and is the perfect addition to any modern living space, optimizing your TV viewing experience. (162 words) The Equip support tv mural 650106 13 42 is a modern and versatile wall-mount TV support that offers a practical solution for medium-sized TVs, weighing just 2.3 kg for easy handling. Its robust steel structure, secured by screw anchors, ensures stability and durability. This support provides an adjustable angle and height system, enabling a customized viewing experience. Its non-slip, wear-resistant plastic surface protects your TV from damage and keeps it securely in place on the wall. The installation process is straightforward, as no drilling is required, and the package includes additional mounting screws and a complete installation kit. Available in black and CE and RoHS certified, this accessory is a must-have for modernizing your room and enhancing your TV viewing experience. (159 words) Equip support tv mural 650106 13 42 is a contemporary wall-mount TV support designed for medium-sized TVs, weighing only 2.3 kg for easy installation and maneuverability. Its sturdy steel structure, secured by screw anchors, ensures stability and durability. This support offers an adjustable angle and height system, enabling a customized viewing experience. Its non-slip, wear-resistant plastic surface safeguards your TV from damage and keeps it securely on the wall. The installation process is hassle-free, as no drilling is required, and the package includes additional mounting screws and a complete installation kit. This accessory is available in black and CE and RoHS certified, making it a perfect addition to any modern living space and an excellent choice for optimizing your TV viewing experience. (151 words) Equip support tv mural 650106 13 42 is a sleek and versatile wall-mount TV support designed for medium-sized TVs, weighing just 2.3 kg for easy handling and installation. Its robust steel structure, secured by screw anchors, ensures stability and durability. This support offers an adjustable angle and height system, enabling a customized viewing experience. Its non-slip, wear-resistant plastic surface protects your TV from damage and keeps it securely in place on the wall. The installation process is hassle-free, as no drilling is required, and the package includes additional mounting screws and a complete installation kit. This black accessory is CE and RoHS certified, making it a must-have for modernizing your room and optimizing your TV viewing experience. (143 words) The Equip support tv mural 650106 13 42 is a contemporary and practical wall-mount TV support designed for medium-sized TVs, weighing only 2.3 kg for easy installation and maneuverability. Its sturdy steel structure, secured by screw anchors, ensures stability and durability. This support offers an adjustable angle and height system, enabling a customized viewing experience. Its non-slip, wear-resistant plastic surface protects your TV from damage and keeps it securely on the wall. The installation process is straightforward, as no drilling is required, and the package includes additional mounting screws and a complete installation kit. This access En savoir plus

32 G MP4 MP3 musique multimédia vidéo lecteur portable USB Slim 1.8 in LCD √HOW TO USE: just copy music from smartphone or PC with your sd card to Mymahdi player you can enjoy the music you want also it can be used as a card reader √Multi-functional: music player,photo viewer, E-book reader,voice recorder,FM radio and video movie,multi-language system provide better experience,perfect for go out,travel and entertainment √Built in rechargeable battery:  Long Play Time Long-life Battery can last about 5-6 Hours after full charge, you can enjoy your love songs for a long time without worrying about the power. And 1.8 inches LCD Screen provides a high resolution. √Best gift choose: best gift for children and 12 months warranty for the  MP3 Player, We pride ourselves on our friendly and prompt customer service       √High Sensitivity Touch Button This mp3 player has only few buttons to operate, every button's function is very simple. independent locking and voice recording key. Easy and convenient operation. √Compact and Portable Fashionable and exquisite appearance and mini size makes this music player very suitable for outdoor entertainment. And crisp sound quality gives you a wonderful listening experience.                   More Details • 1.8" TFT LCD screen • Audio connector: 3.5mm stereo headphone jack • Build in (JPG, BMP) Picture browser • Supports MP3, WMA, WAV format • Video Support: AMV format, provided software to convert video to AMV movie format • Repeat modes: Normal, Repeat One, Repeat All, Folder, Repeat Folder, Random and Intro • Equalizer settings: Natural, Rock, Pop, Classic, Soft, Jazz and DBBBuilt-in FM Radio • Digital recording: records with the integrated microphone • Work as a Thumb Drive: File management: manage files with folders as on computers • Built-in rechargeable lithium battery • Built-in 32GB  Memory • Built-in USB 2.0 port: connects easily to your computer with USB cable • Language support: English, Simple Chinese, Traditional Chinese, Italian, Spanish, French, German, Japanese, Korean, Russian, Dutch, Portuguese, Swedish, Czech, Denmark, Polish, Romanian, Turkish, Hebrew, Thai and Greece • Support WINDOWS /8.1/8/7/98/XP/Vista/2000/ME/SE/98 • Record your favorite music directly from FM Radio • 8 Equalizer Settings: Jazz, Classic, Pop, Rock, Natural, 3D,Bass and Custom • Multi-Tasking: Player Mp3 and Read eBook at same time Package  1 x mp3 (32GB internal memory) 1 x usb cable 1 x user manual 1 x earphone (free)  Moyen de Paiement Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. Livraison Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Politique de Retour Si vous n'êtes pas satisfait de votre achat, contactez-nous sans hésiter. Les articles peuvent être retournés dans 30 jours en état inutilisé, nous effectuerons un échange et un remboursement une fois que nous aurons reçu l'objet. Gardez les étiquettes entières et les éléments propres sans saveur, si non nous n'accepterons pas le retour. Sur nous Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. √HOW TO USE: just copy music from smartphone or PC with your sd card to Mymahdi player you can enjoy the music you want also it can be used as a card reader √Multi-functional: music player,photo viewer, E-book reader,voice recorder,FM radio and video movie,multi-language system provide better experience,perfect for go out,travel and entertainment √Built in rechargeable battery:  Long Play Time Long-life Battery can last about 5-6 Hours after full charge, you can enjoy your love songs for a long time without worrying about the power. And 1.8 inches LCD Screen provides a high resolution. √Best gift choose: best gift for children and 12 months warranty for the  MP3 Player, We pride ourselves on our friendly and prompt customer service       √High Sensitivity Touch Button This mp3 player has only few buttons to operate, every button's function is very simple. independent locking and voice recording key. Easy and convenient operation. √Compact and Portable Fashionable and exquisite appearance and mini size makes this music player very suitable for outdoor entertainment. And crisp sound quality gives you a wonderful listening experience.                   More Details • 1.8" TFT LCD screen • Audio connector: 3.5mm stereo headphone jack • Build in (JPG, BMP) Picture browser • Supports MP3, WMA, WAV format • Video Support: AMV format, provided software to convert video to AMV movie format • Repeat modes: Normal, Repeat One, Repeat All, Folder, Repeat Folder, Random and Intro • Equalizer settings: Natural, Rock, Pop, Classic, Soft, Jazz and DBBBuilt-in FM Radio • Digital recording: records with the integrated microphone • Work as a Thumb Drive: File management: manage files with folders as on computers • Built-in rechargeable lithium battery • Built-in 32GB  Memory • Built-in USB 2.0 port: connects easily to your computer with USB cable • Language support: English, Simple Chinese, Traditional Chinese, Italian, Spanish, French, German, Japanese, Korean, Russian, Dutch, Portuguese, Swedish, Czech, Denmark, Polish, Romanian, Turkish, Hebrew, Thai and Greece • Support WINDOWS /8.1/8/7/98/XP/Vista/2000/ME/SE/98 • Record your favorite music directly from FM Radio • 8 Equalizer Settings: Jazz, Classic, Pop, Rock, Natural, 3D,Bass and Custom • Multi-Tasking: Player Mp3 and Read eBook at same time Package  1 x mp3 (32GB internal memory) 1 x usb cable 1 x user manual 1 x earphone (free)  PAYMENT Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. SHIPPING Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. ABOUT US Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Le 22-nov.-19 à 05:44:15 Paris, le vendeur a ajouté les informations suivantes:

Features 100% brand new. BNC Male/Female to two dual 4mm Binding Post Material: Plastic,Nickel PlatedItem Description: Frequency range(MHz): 45~860 Nominal gain(dB): 20±2 Flatness in band(dB): ±0.75 Max output level(dBμV): 109 Nominal input level (dBμV): 72 Gain adjustment range(dB): 0~10 Slop preset(dB): 3~18 Noise factor(dB): ≤5 Return loss(dB): ≥10 Power supply: 110-220V~ 50-60Hz Power consumption(W): 2 Number of outputs: 3 Features: - Designed with imported high frequency components to provide high performance. - Designed with push-pull amplification,low noise and low distortion. - Double-sided board and automatic assembling design, more precise circuit and higher density of integration provides better performance. - Aluminum shell provides fine shielding properties and strong capacity of resisting disturbance. - Providing manual gain and slope control to adjust suitable signal. Package Weight: 180.0 G / 6.35 Ounces Package Dimensions (L*W*H): 150*40*10 MM / 5.91*1.57*0.39 Inches Retail Packaging: Yes, Blister Packaging Package Including: 1 x CATV Signal Amplifier 3 x Accessories Tools 3 x Screws   Le 22-janv.-20 à 13:06:36 Paris, le vendeur a ajouté les informations suivantes:

Antenne intérieure Antena TV HD HDTV 1080P 4K Antenne Range 960 mille Skywire Features: 1.Free Full HD channels 2.TV antenna light Ultra thin and easy to use, allows you to place it almost anywhere and does not require power. 3.960 miles long range-reception of this HDTV antenna has optimized to the most reasonable condition. 4.Transparent TV Full HD and new design 2019-the new soft material PC flame retardant respectful with the environment and ultra-thin high-performance design that provides protection against moisture and lightning to our interior HDTV antenna!   Indoor HDTV antenna features: 1) On all FM channels excellent reception / VHF / UHF. 2) It can be painted safely to combine with any domestic d; eacute; it does not affect reception or loss of signal. 3) The super soft, slim design and powerful reception capacity make this antenna the best choice for any home. Package include: 1* TV antenna 1 * receiver 1 * instruction Moyen de paiement Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. Livraison Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Conditions de vente Si vous n'êtes pas satisfait de votre achat, contactez-nous sans hésiter. Les articles peuvent être retournés dans 30 jours en état inutilisé, nous effectuerons un échange et un remboursement une fois que nous aurons reçu l'objet. Gardez les étiquettes entières et les éléments propres sans saveur, si non nous n'accepterons pas le retour. Sur nous Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Features: 1.Free Full HD channels 2.TV antenna light Ultra thin and easy to use, allows you to place it almost anywhere and does not require power. 3.960 miles long range-reception of this HDTV antenna has optimized to the most reasonable condition. 4.Transparent TV Full HD and new design 2019-the new soft material PC flame retardant respectful with the environment and ultra-thin high-performance design that provides protection against moisture and lightning to our interior HDTV antenna!   Indoor HDTV antenna features: 1) On all FM channels excellent reception / VHF / UHF. 2) It can be painted safely to combine with any domestic d; eacute; it does not affect reception or loss of signal. 3) The super soft, slim design and powerful reception capacity make this antenna the best choice for any home. Package include: 1* TV antenna 1 * receiver 1 * instruction PAYMENT Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. SHIPPING Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Terms of Sale Si vous n'êtes pas satisfait de votre achat, contactez-nous sans hésiter. Les articles peuvent être retournés dans 30 jours en état inutilisé, nous effectuerons un échange et un remboursement une fois que nous aurons reçu l'objet. Gardez les étiquettes entières et les éléments propres sans saveur, si non nous n'accepterons pas le retour. ABOUT US Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Le 19-févr.-20 à 10:32:34 Paris, le vendeur a ajouté les informations suivantes:

Parfait  état, fonctionnement parfait testé, sera très solidement emballé. Peut être envoyé de france Suisse vers Suisse 14 Frs en recommandé Pour pays hors Europe me contacter pour les frais d'envoi  Bonnes enchères  This Pioneer CT-S670D is a stereo cassette deck with Dolby B/C and HX-Pro noise reduction, it was first sold by Pioneer in 1997 with a manufacturer suggested retail price of USD $310 and discontinued a year later. The main features of the Pioneer CT-S670D are: 3 heads and off-tape monitoring, digital linear tape counter with 4 digits, automatic tape type selection and capable of handling normal, chrome and metal tapes, belt driven single-capstan transport. Typical front loading cassette deck with the cassette compartiment located on the center of the deck. Tape loading/unloading is operated motorized and the cassette needs to be placed with the side to be played facing forward in the cassette well. Level meters used on the CT-S670D are generic digital peak reading meters with peak hold for easy adjustment of optimum recording level. Full-logic transport controls used on the CT-S670D let it respond to the slightest finger contact for fast and effortless transport function selection. To ensure the best response from the wide variety of tapes available adjustment of, bias, equalization and sensitivity, to optimum levels can be performed prior to recording. Dolby C-type used in the CT-S670D provides 20 dB of noise reduction above about 1,000 Hz, fully doubling the amount given by B-type. The Dolby HX PRO system provides precise bias control during recording to reduce distortion and improve linearity in the high-frequency range, the result is recorded sound that is highly faithful to the original. For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable. -  Advanced 3-Head System -  20bit A/D - D/A Converter -  Super Auto BLE XD -  Digital Processing System -  ALCA (Auto Level Control with Tape Analysis) -  Legato Link Conversion -  FLEX (Frequency Level Expander) Stereo Cassette Deck (1998)  (1 review) Specifications Type: 3-head, single compact cassette deck Track System: 4-track, 2-channel stereo Tape Speed: 4.75 cm/s Heads: 1 x combination record/playback, 1 x erase Motor: 1 x reel, 1 x capstan, 1 x assist Tape Type: type I, CrO2, Metal Noise Reduction: B, C, HX Pro, Digital NR Frequency Response: 20Hz to 21kHz  (Metal tape) Signal to Noise Ratio: 90dB  (Digital NR) Wow and Flutter: 0.05% Total Harmonic Distortion: 0.6% Input: 100mV (line) Output: 0.5V (line) Dimensions: 420 x 128 x 277mm Weight: 4.5kg Year: 1998 Note: digital optical input

Features 100% brand new. BNC Male/Female to two dual 4mm Binding Post Material: Plastic,Nickel PlatedItem Description: Frequency range(MHz): 45~860 Nominal gain(dB): 20±2 Flatness in band(dB): ±0.75 Max output level(dBμV): 109 Nominal input level (dBμV): 72 Gain adjustment range(dB): 0~10 Slop preset(dB): 3~18 Noise factor(dB): ≤5 Return loss(dB): ≥10 Power supply: 110-220V~ 50-60Hz Power consumption(W): 2 Number of outputs: 3 Features: - Designed with imported high frequency components to provide high performance. - Designed with push-pull amplification,low noise and low distortion. - Double-sided board and automatic assembling design, more precise circuit and higher density of integration provides better performance. - Aluminum shell provides fine shielding properties and strong capacity of resisting disturbance. - Providing manual gain and slope control to adjust suitable signal. Package Weight: 180.0 G / 6.35 Ounces Package Dimensions (L*W*H): 150*40*10 MM / 5.91*1.57*0.39 Inches Retail Packaging: Yes, Blister Packaging Package Including: 1 x CATV Signal Amplifier 3 x Accessories Tools 3 x Screws Le 12-avr.-20 à 04:06:08 Paris, le vendeur a ajouté les informations suivantes:

Etat Neuf frais de port offert via UPS pour la France. RedNet D16 AES is a 1U 19in rack-mount interface featuring 16 channels of AES/EBU connectivity to and from a Dante audio network, with Ethernet redundancy for maximum network reliability. Perfect for bridging between digital consoles, power amplifiers or any other AES3 equipped audio equipment and a Dante network, RedNet D16 AES has a Sample Rate Convertor (SRC) on each input pair allowing instant operation with any AES3 source. Word Clock and Digital Audio Reference Signal (DARS) connections provide synchronisation with a wide range of hardware, while S/PDIF I/O allows the integration of equipment such as CD or solid state recorders/players. 16 Channel RedNet AES3 Interface for Dante Network AES3 connectivity allows connection of external converters, effects units, mixing consoles or any other AES3 equipped audio equipment to the Dante audio network Dual rear-panel Ethernet connectors (primary and secondary connectors) allow maximum network reliability with seamless switchover to a standby network in the unlikely event of a network failure. The ports can alternatively be used to daisy-chain additional units. SRC allows external equipment to run at any sample rate, irrespective of the sample rate or clocking of the Dante audio network Compact design allows maximum functionality in minimum rack space, with a full 16 channels of I/O in 1U. RedNet D16 AES features the standard trademark red anodised front panel RedNet D16 provides two 8-channel AES59 combined I/O DB25 connections. In addition, a pair of XLR3 connectors duplicates channels 1 & 2 The rear panel XLR input connector can either be used as a DARS input or as a traditional AES3 audio input, replacing channels 1‰ÛÒ2 of the DB25 inputs S/PDIF input and outputs are provided on RCA connectors; ideal for connecting CD players or solid-state recorders. The input replaces channels 3 & 4 in the DB25 connector while the output can be assigned to replicate any adjacent odd/even output pair Word Clock I/O on BNC connectors allows synchronisation of the Dante network to house clock, or syncing external equipment to the Dante network RedNet Control 2 software provides comprehensive remote control capability via a powerful tabbed browser-like graphic user interface, handling up to 600 devices

Feature: The wireless Bluetooth stereo earbuds A7 utilize the latest TWS (True Wireless Stereo) Bluetooth technology, the audio frequency range is similar to WIFI signal. With many years of Bluetooth experience and unique expertise in sound quality, the wireless earbuds guarantee superior sound and call quality. Advanced microphones for superior call technology and make sure that conversation quality. Experience up to 8 hours of music or talk time, Whether you are listening to songs or answering calls, relish in the freedom of true wireless and easy connectivity to your Android or Apple iOS smartphone. The A7 cord-free earbuds stay in place no matter how vigorous your work-out. Our unique wearing style allows you to choose to use either one or both e... Wireless Bluetooth 4.2 Headphones TWS Earbuds Earphones IOS Android Feature: The wireless Bluetooth stereo earbuds A7 utilize the latest TWS (True Wireless Stereo) Bluetooth technology, the audio frequency range is similar to WIFI signal. With many years of Bluetooth experience and unique expertise in sound quality, the wireless earbuds guarantee superior sound and call quality. Advanced microphones for superior call technology and make sure that conversation quality. Experience up to 8 hours of music or talk time, Whether you are listening to songs or answering calls, relish in the freedom of true wireless and easy connectivity to your Android or Apple iOS smartphone. The A7 cord-free earbuds stay in place no matter how vigorous your work-out. Our unique wearing style allows you to choose to use either one or both earbuds. No matter how hard you push yourself, you’ll enjoy the ultimate comfort and secure fit that comes with being truly wireless. TURE WIRELESS STEREO: Portable Stereo Sport Headphones, Sports Headsets Lightweight Earbuds With Mic for iPhone Samsung HTC LG and other Bluetooth devices. STATE OF THE ART EARPHONES DESIGN: Best workout Bluetooth headphones. Great for walking, Jogging, Hiking, Biking, Gym, and some other activity. SUPERB SOUND QUALITY: High-Quality Chip for Stereo Sound and Bass Sound.Clear High & Low Volume. It's Easy To Take and Make Calls, Voice Dialing with Superior Microphone Quality. Ideal for Car Calling and Friends Chatting, or Working Use. CVC NOISE CANCELLATION TECHNOLOGY: It has excellent noise cancellation technology with the use of CVC depth noise reduction. Bilateral stereo APT-X lossless sound quality, it provides a shock enjoyment with entering the ear in a deep bass voice. The sound hole design reduces an echo back of sound waves, making the sound room purer and the high, medium and bass more harmonious. LONG BATTERY LIFE: Built-in 300mAh battery box, it can charge the two true wireless earbuds 3 times without cable, Up to 8 hours music or talking time, you never have to worry about running out of battery on your wireless headphone. COMFORTABLE AND SECURE: Ergonomically designed with gel flex silicone earbuds to ensure your headphones stay comfortably firm in place to guarantee fatigue-free ears and tangle free comfort. Compatible Device: Bluetooth-enabled mobile phones, tablets, computer, watch, MP4, speaker. Bluetooth Standard: V4.2+EDR Bluetooth Profiles: HSP1.2、HFP1.6 、A2DP1.3、AVRCP1.5 Audio enhancements: CVC noise reduction Standby Time: Up to 20 Hours Battery type: Rechargeble lithium-ion polymer battery Battery capacity: 50 mAh (with a 300mAh protable battery case) How to use it? Binaural Mode: （Both earbuds work together） Note：This mode would need you to turn off the Bluetooth on phone firstly. 1. Pressing the two earbuds' main button for seconds at the same time till the Red&Blue light flash alternately; 2. Double-Click one the of earbuds (the other one keep still) to get paired with the other one, that would cost 3 seconds; 3. Turn on the Bluetooth on phone, find out "A7" and connect it, then you would hear the sound for both. If you want to use one, please refer below. That would be more easier. Single Mode: 1. Pressing the earbud's main button for seconds untill the Red&Blue light flash alternately; 2. Find out "A7" on Bluetooth and connect it, then you would hear the sound in one earbud. Note: The wireless buletooth stereo earbuds utilize the latest TWS (True Wireless) Bluetooth technology,the audio frequency range is similar with WIFI signal.It is a normal phenomenon that in individual cases, slave earbud(right chennal) might be interference by wireless signals but it connected automatically after without sound for 1-2 seconds while master earbud(left chennal)runs fine.Please try reconnect the earbud if it has a sound or connection problem. The distance between the headset and mobile phone can not be greater than 10M. The distance between the two earphones can not be greater than 50cm. If in Calling, just the Main earphone has the voice. Package Include: 2X Bluetooth Headset 1X Charger Dock 1X User Manual 1X Charging Cable 2X Earbuds Item Specifics EAN: 4895187192848 Marque: Qumox Numéro de pièce fabricant: F143U Payment 1.Quand le paiement des acheteurs est accompli, nous livrerons les marchandises dans un délai de 48 heures. 2.Le transport de fret demande normalement un délais de 6 à 15 jours 3.Nous acceptons seulement l'adresse de Paypal pour la livraison. Les acheteurs doivent s'assurer que l'adresse de Paypal correspond à celle de la réception avant paiement. Returns 1. L'acheteur doit nous informer dans un délai de 14 jours (A compter du jour de délivrance des marchandises). 2. Toutes les marchandises doivent être renvoyées dans leur emballage d'origine avec tous les accessoires au complet. Professional Quality Best Price New List Item Monster N-Tune 450 Overhead Bluetooth Headphone rouge EUR 32.99 Jaybird X4 Wireless Bluetooth Headphones Compatible iOS Android Noir EUR 89.99 Jaybird X4 Wireless Bluetooth Headphones Compatible iOS Android Storm EUR 89.99 Monster N-Tune 450 Overhead Bluetooth Headphone Bleu EUR 32.99 Monster N-Tune 450 Overhead Bluetooth Headphone Noir EUR 32.99 Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us Wireless Bluetooth 4.2 Headphones TWS Earbuds Earphones IOS Android Feature: The wireless Bluetooth stereo earbuds A7 utilize the latest TWS (True Wireless Stereo) Bluetooth technology, the audio frequency range is similar to WIFI signal. With many years of Bluetooth experience and unique expertise in sound quality, the wireless earbuds guarantee superior sound and call quality. Advanced microphones for superior call technology and make sure that conversation quality. Experience up to 8 hours of music or talk time, Whether you are listening to songs or answering calls, relish in the freedom of true wireless and easy connectivity to your Android or Apple iOS smartphone. The A7 cord-free earbuds stay in place no matter how vigorous your work-out. Our unique wearing style allows you to choose to use either one or both earbuds. No matter how hard you push yourself, you’ll enjoy the ultimate comfort and secure fit that comes with being truly wireless. TURE WIRELESS STEREO: Portable Stereo Sport Headphones, Sports Headsets Lightweight Earbuds With Mic for iPhone Samsung HTC LG and other Bluetooth devices. STATE OF THE ART EARPHONES DESIGN: Best workout Bluetooth headphones. Great for walking, Jogging, Hiking, Biking, Gym, and some other activity. SUPERB SOUND QUALITY: High-Quality Chip for Stereo Sound and Bass Sound.Clear High & Low Volume. It's Easy To Take and Make Calls, Voice Dialing with Superior Microphone Quality. Ideal for Car Calling and Friends Chatting, or Working Use. CVC NOISE CANCELLATION TECHNOLOGY: It has excellent noise cancellation technology with the use of CVC depth noise reduction. Bilateral stereo APT-X lossless sound quality, it provides a shock enjoyment with entering the ear in a deep bass voice. The sound hole design reduces an echo back of sound waves, making the sound room purer and the high, medium and bass more harmonious. LONG BATTERY LIFE: Built-in 300mAh battery box, it can charge the two true wireless earbuds 3 times without cable, Up to 8 hours music or talking time, you never have to worry about running out of battery on your wireless headphone. COMFORTABLE AND SECURE: Ergonomically designed with gel flex silicone earbuds to ensure your headphones stay comfortably firm in place to guarantee fatigue-free ears and tangle free comfort. Compatible Device: Bluetooth-enabled mobile phones, tablets, computer, watch, MP4, speaker. Bluetooth Standard: V4.2+EDR Bluetooth Profiles: HSP1.2、HFP1.6 、A2DP1.3、AVRCP1.5 Audio enhancements: CVC noise reduction Standby Time: Up to 20 Hours Battery type: Rechargeble lithium-ion polymer battery Battery capacity: 50 mAh (with a 300mAh protable battery case) How to use it? Binaural Mode: （Both earbuds work together） Note：This mode would need you to turn off the Bluetooth on phone firstly. 1. Pressing the two earbuds' main button for seconds at the same time till the Red&Blue light flash alternately; 2. Double-Click one the of earbuds (the other one keep still) to get paired with the other one, that would cost 3 seconds; 3. Turn on the Bluetooth on phone, find out "A7" and connect it, then you would hear the sound for both. If you want to use one, please refer below. That would be more easier. Single Mode: 1. Pressing the earbud's main button for seconds untill the Red&Blue light flash alternately; 2. Find out "A7" on Bluetooth and connect it, then you would hear the sound in one earbud. Note: The wireless buletooth stereo earbuds utilize the latest TWS (True Wireless) Bluetooth technology,the audio frequency range is similar with WIFI signal.It is a normal phenomenon that in individual cases, slave earbud(right chennal) might be interference by wireless signals but it connected automatically after without sound for 1-2 seconds while master earbud(left chennal)runs fine.Please try reconnect the earbud if it has a sound or connection problem. The distance between the headset and mobile phone can not be greater than 10M. The distance between the two earphones can not be greater than 50cm. If in Calling, just the Main earphone has the voice. Package Include: 2X Bluetooth Headset 1X Charger Dock 1X User Manual 1X Charging Cable 2X Earbuds Item Specifics EAN: 4895187192848 Marque: Qumox Numéro de pièce fabricant: F143U Payment Returns 1.Quand le paiement des acheteurs est accompli, nous livrerons les marchandises dans un délai de 48 heures. 2.Le transport de fret demande normalement un délais de 6 à 15 jours 3.Nous acceptons seulement l'adresse de Paypal pour la livraison. Les acheteurs doivent s'assurer que l'adresse de Paypal correspond à celle de la réception avant paiement. 1. L'acheteur doit nous informer dans un délai de 14 jours (A compter du jour de délivrance des marchandises). 2. Toutes les marchandises doivent être renvoyées dans leur emballage d'origine avec tous les accessoires au complet. Powered by SoldEazy

Kramer TOOLS  TR1 bon etat general TR-1 A high resolution video isolation transformer for composite video signals. It provides complete isolation between devices thus eliminating video hum, ground loops, and DC offsets which can degrade picture quality. - 5.8MHz Bandwidth (- 3dB) - Passive (no power required) - Dimensions (WxHxD): 120 x 30 x 73mm. Weight 340g - Supplied with user manual and mounting  Product Specific Info For The Item Sold On This Listing - Video Isolation Transformer - TR-1 - A high resolution video isolation transformer for composite video signals. It provides complete isolation between devices thus eliminating video hum, ground loops, and DC offsets which can degrade picture quality. - 5.8MHz Bandwidth (- 3dB) - Passive (no power required) - Dimensions (WxHxD) - 120 x 30 x 73mm. Weight 340g - Supplied with user manual and mounting brackets

PRODYS Pronto 2 ISDN Codec USED Good condition Pronto 2 ISDN Audio Codec: Pronto2-ISDN is designed for those users who demand higher quality in their ISDN connections. It includes the two ISO MPEG Layer II compression modes most widely-used in broadcasting: MONO 64 Kbps (10.5 Khz) and Joint Stereo 128 Kbps (20Khz). The last one with the J52 standard for transmission via two independent 64 Kbps channels. It also includes a digital audio I/0 AES/EBU signal and a connector for transmitting and receiving auxiliary data simultaneously with the MPEG audio. It is also possible to replace the ISDN communications interface with two X21 ports. This expands the possibilities for connecting the equipment to other digital communication networks (dedicated networks, satellite communications etc.) In G711 mode, the Pronto2 ISDN provides an alternative to normal telephone hybrids, by allowing standard voice communications on the ISDN network as well as on analogue telephone networks. A conventional analogue telephone connected to the front panel, allows to make, receive and transfer calls or put them on hold or on air in the same way as conventional telephone hybrids. When G722 mode is selected, the unit permits high quality voice communications via the ISDN network, with the advantage over other audio encoding systems of having a low coding delay. Its most important features are: • ISDN universal terminal adapter (S0) and X21 interface. • Analogue or digital audio (AES/EBU). The AES/EBU interface provides input for external clock. • Dual operation (two fully independent communications) in G711, G722 and MPEG ayer II MONO 64 Kbps. • Independent operating encoding and decoding modes. • Automatic detection of the encoding mode used by the remote unit. • Compatibility in all modes (G722 and MPEG Layer II) with CCS and TELOS. • Auxiliary data in MPEG Layer II modes. • Electrical echo canceller and multiplex (conferencing) in G711. EXTERNAL TELEPHONE: The Prontos also feature the ability, accessed through a simple front panel menu, to remote control the unit with a standard analogue telephone (connected to the RJ11 socket on the front panel) using the DTMF (multifrequency) tones generated by the dial pad. The same telephone can also replace an audio I/O channel in G711/G722 modes to act, for example, as a talkback system. PORT 20 EUROS EN SUS COLISSIMO LE PRIX EST TTC ET LA TVA EST RECUPERABLE NON SERIEUX S'ABSTENIR

Antenne FM Connecteur de Type Femelle / Mâle Récepteur Radio Audio pour Yamah SH    Specification: Color: Transparent Gain: 3dB Frequency Range: 520-1710MHz Output Impedance: 300Ω Standing Wave Ratio: ≤1.5dB Working Voltage: 12V Size: One Size Total Length: 2.0m/ 6.56in Quantity: 1 Pc Note: 1.No retail package. 2.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid. 3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Features: 1.100% brand new and high quality 2.Improves FM& multiplex stereo reception. 3.Allows a longer reach and receive more channels and radio stations. 4.Easy to Install. Simply push the F type Female connector into the intended male connector. 5.Provides a better radio reception for stereo receivers in your home, office, garage, basement and so on. 6.Fit for Blaupunkt Pioneer Clarion Kenwood Alpine JVC Yamaha Denon Teac Panasonic Onkyo Marantz Sansui Roberts Radio etc. Package Including: 1 x FM Antenna (FM Antenna only, other accessories demo in the picture are not included!) Payment Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. Shipping Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Terms of Sale Si vous n'êtes pas satisfait de votre achat, contactez-nous sans hésiter. Les articles peuvent être retournés dans 30 jours en état inutilisé, nous effectuerons un échange et un remboursement une fois que nous aurons reçu l'objet. Gardez les étiquettes entières et les éléments propres sans saveur, si non nous n'accepterons pas le retour. About US Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service.  Specification: Color: Transparent Gain: 3dB Frequency Range: 520-1710MHz Output Impedance: 300Ω Standing Wave Ratio: ≤1.5dB Working Voltage: 12V Size: One Size Total Length: 2.0m/ 6.56in Quantity: 1 Pc Note: 1.No retail package. 2.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid. 3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Features: 1.100% brand new and high quality 2.Improves FM& multiplex stereo reception. 3.Allows a longer reach and receive more channels and radio stations. 4.Easy to Install. Simply push the F type Female connector into the intended male connector. 5.Provides a better radio reception for stereo receivers in your home, office, garage, basement and so on. 6.Fit for Blaupunkt Pioneer Clarion Kenwood Alpine JVC Yamaha Denon Teac Panasonic Onkyo Marantz Sansui Roberts Radio etc. Package Including: 1 x FM Antenna (FM Antenna only, other accessories demo in the picture are not included!) PAYMENT Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. SHIPPING Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Terms of Sale Si vous n'êtes pas satisfait de votre achat, contactez-nous sans hésiter. Les articles peuvent être retournés dans 30 jours en état inutilisé, nous effectuerons un échange et un remboursement une fois que nous aurons reçu l'objet. Gardez les étiquettes entières et les éléments propres sans saveur, si non nous n'accepterons pas le retour. ABOUT US Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Le 24-août-20 à 08:59:07 Paris, le vendeur a ajouté les informations suivantes:

Signal antenne télévision numérique aérienne 960 milles amplifié mince 4K SH Description: 1. Stylish ultra-thin paper design - Our TV antenna is ultra-thin and lightweight, which can be hidden behind the TV, laid flat on the table or placed high on the window. TV antennas can be used as decorations when watching hundreds of free clear crystals. Provide you with digital and HD programming! 2. Easy to install TV antenna - Place the TV antenna on a window or wall for best results. Connect one end of the coaxial cable to the TV antenna and the other end to the TV. 3. It is very convenient to install TV antennas anywhere in the home, and the signal attenuation is small to ensure clear and stable image quality. 4. Thin paper design with detachable amplifier - discreet and slim, to match your décor or hide out of sight. 5. If you are away from the broadcast tower, the included amplifier provides greater range and maximum signal reception for more channels. Specification: Item type:Antenna Radome Color Black Product size: 220 x 140 x 0.6mm Storage Temperature: -45 - 85 degC V.S.W.R.: ≤1.5, Max Gain:20 dBi (Do Not with Amplifier) Working Frequency: 174~240MHz,470~862MHz Operation Temperature: -45 - 85 degC Impedance: 75Ohm Coaxial Cable: 3.7M length Connector Type: F - head with TV adapter Package Include: 1 x Antenna Note: The colors deviation might differ due to different monitor settings.   Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Si vous n'êtes pas satisfait de votre achat, contactez-nous sans hésiter. Les articles peuvent être retournés dans 30 jours en état inutilisé, nous effectuerons un échange et un remboursement une fois que nous aurons reçu l'objet. Gardez les étiquettes entières et les éléments propres sans saveur, si non nous n'accepterons pas le retour. Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Description: 1. Stylish ultra-thin paper design - Our TV antenna is ultra-thin and lightweight, which can be hidden behind the TV, laid flat on the table or placed high on the window. TV antennas can be used as decorations when watching hundreds of free clear crystals. Provide you with digital and HD programming! 2. Easy to install TV antenna - Place the TV antenna on a window or wall for best results. Connect one end of the coaxial cable to the TV antenna and the other end to the TV. 3. It is very convenient to install TV antennas anywhere in the home, and the signal attenuation is small to ensure clear and stable image quality. 4. Thin paper design with detachable amplifier - discreet and slim, to match your décor or hide out of sight. 5. If you are away from the broadcast tower, the included amplifier provides greater range and maximum signal reception for more channels. Specification: Item type:Antenna Radome Color Black Product size: 220 x 140 x 0.6mm Storage Temperature: -45 - 85 degC V.S.W.R.: ≤1.5, Max Gain:20 dBi (Do Not with Amplifier) Working Frequency: 174~240MHz,470~862MHz Operation Temperature: -45 - 85 degC Impedance: 75Ohm Coaxial Cable: 3.7M length Connector Type: F - head with TV adapter Package Include: 1 x Antenna Note: The colors deviation might differ due to different monitor settings. PAYMENT Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. SHIPPING Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Terms of Sale Si vous n'êtes pas satisfait de votre achat, contactez-nous sans hésiter. Les articles peuvent être retournés dans 30 jours en état inutilisé, nous effectuerons un échange et un remboursement une fois que nous aurons reçu l'objet. Gardez les étiquettes entières et les éléments propres sans saveur, si non nous n'accepterons pas le retour. ABOUT US Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Le 18-sept.-20 à 08:46:18 Paris, le vendeur a ajouté les informations suivantes:

Zoom Nikon AF Nikkor 35-70mm 1:2.8 + Zoom Nikon AF Nikkor 28-85mm 1:3.5-4.5 The Zoom Nikon AF Nikkor 35-70mm 1:2.8 is in good condition, AF works precisely and smooth. The lenses are clear without fog, fungus or scratches. A little bit of dust (normal for the age of this lens). The only problem with this Zoom is the push and back zoom, who blocks around 60mm - so you have a zoom like 35-60mm.(he don't go until 70mm). I really don't know why (I already got like that). Otherwise, this zoom provides very good quality pictures. One of the best of this generation. Comes with Hoya UV filter and both caps. AF Nikkor 35-70mm 1:2.8 specs The Zoom Nikon AF Nikkor 28-85mm 1:3.5-4.5 is in poor condition but works. The lenses are clear without fog or fungus. The focus works normally from 50mm to 85mm, but from 28mm to 50mm just in closest objects, even in manual. Macro works perfectly. The front element has some scratches, nothing really big, but they are there. Some dust too. Otherwise, this zoom provides very good quality pictures. Comes with Promaster UV filter and both caps. AF Nikkor 28-85mm 1:3.5-4.5  specs Both lenses work with Nikon AF-801/F-801s, F5, F-100, D2x, D3, D4, D800 and many other (Digital and Film cameras) Nikon cameras without built-in auto-focus motor they will work just in manual focus. Both lenses work with Nikon AF-801/F-801s, F5, F-100, D2x, D3, D4, D800 and many other (Digital and Film cameras) Nikon cameras without built-in auto-focus motor they will work just in manual focus. Look to my auctions. I have a lot of stuff to sell:: My auctions I group all items in one shipping. Ask for rate if you buy many of my items. Shipping to Germany, Belgique, Luxembourg, Netherlands, UK, España, Italia, Portugal and Austria is 10,42€. Ukraine, Maghreb and Norway, shipping is 24,35€.

Nice E-Mu ESI 4000 Sampler, In good clean condition and full working order. ESI is the very latest in the long line of high quality and affordable E-mu sampling products. ESI features 22.05 kHz and 44.1 kHz sampling rates and 16-bit resolution for CD quality sound. Sampling can be performed in either mono or true stereo. 64 channels of polyphony allow you to stack sounds or create lush sequences without fear of channel “ripoff”. The user-upgradable memory can be expanded to a maximum of 128 Mbytes using standard SIMM modules (Details and installation are available at your E-mu dealer).   The ESI has full access to the huge library of sounds available from E-mu and other sources. It is fully compatible with the legendary EIII and EIIIX libraries, and can import Emax II and Akai S1000/S1100 banks. In many cases, the ESI can import and convert programs faster than the source unit!   The advanced features of the ESI make sampling easy. Samples can be automatically truncated, normalized and placed on the keyboard as the sample is taken. ESI also contains advanced tools such as Auto Correlation, Loop Compression and Crossfade Looping which allow even the most difficult sounds to be easily looped.   Samples can be digitally spliced and mixed with other samples, and dynamically controlled from the keyboard using velocity and positional crossfading and switching functions. Advanced digital processing features such as Sample Rate Conversion, Compressor, Digital Parametric Equalizer and Digital Tuning allow you to shape raw samples more quickly and with greater precision than computer based systems. Additional digital processing functions include: Time Compression and Expansion, which shorten or lengthen the time of samples without changing the pitch; and Doppler/Pan, which allows you to move samples forward and backwards in space as well as from side to side. The Sonic Enhancer adds brilliance and cut to a sample, helping it to stand out in a mix.   The ESI contains 19 different filters types for each of its 64 channels. The digital filters are very “analog sounding” and implement the following filter types:   • 12, 24, or 36 dB/octave Lowpass filters with Resonance • 2nd & 4th order Highpass filters with Resonance • 2nd & 4th order Bandpass filters with Resonance • Contrary Bandpass filter • Three types of Swept EQ filters • Three Phasers and one Flanger filter with Resonance • Two morphing Vocal Formant filters • Bottom Feeder • Original ESi-32 24 dB/octave Lowpass filter   Modulation sources include three AHDSR envelope generators and a multi-wave LFO per channel, as well as full MIDI modulation control over virtually every parameter.   The ESI's unique Trigger Mode allows up to ten different samples to be triggered from the front panel without connecting a keyboard, making it an ideal tool for DJ's.   The ESI is 16 part multi-timbral which means you can create complex sequences and sound effects.   Four polyphonic audio outputs with integral submix returns allow you to process certain sounds separately and return them to the main outputs without using up precious mixer channels. The Turbo option card adds four additional submix outputs plus an Effects main output. The ESI can access up to 999 samples per bank arranged in up to 256 presets. The integral 3.5" floppy disk drive provides a convenient means of storing and loading banks. A built-in SCSI interface provides access to external high density media such as hard disks, magneto-optical disks or CD ROM.   A digital interface, available on the “Turbo” option, facilitates the transfer of stereo digital audio between digital recorders, mixers, etc. The Turbo option card also contains two stereo 24-bit digital effects processors which add Reverb, Delay, Flanging and Distortion effects to the ESI. Over 70 effects are implemented which can be applied on a per MIDI channel basis or by keyboard

UAD 2 Satellite Quad Firewire. External Firewire 800 and 400 DSP accelerator unit, compatible with select Intel-based iMacs, MacBook Pros and Mac minis Includes "Analog Classics" plug-in bundle, featuring LA-2A Classic Audio Leveler, 1176LN / 1176SE Classic Limiting Amplifiers, Pultec EQP-1A and Realverb Pro plug-ins. High-bandwidth Firewire DSP Accelerator with four Analog Devices SHARC processors Bundled with the LA-2A and 1176LN Compressor/Limiters, and the Pultec EQP-1A EQ plug-ins, the UAD-2 Satellite QUAD provides rich, vintage sound quality right out of the box. Of course, the UAD-2 Satellite also provides easy Firewire access to the complete UAD Powered Plug-Ins library, including titles from Studer, SSL, Manley, Empirical Labs, Neve, Roland, BOSS, EMT, Fairchild, Harrison, Helios, Little Labs, Lexicon, Pultec, SPL and more (sold separately). Compatible with select iMac and MacBook Pros, with support for VST, Audio Units and RTAS, the UAD-2 Satellite QUAD features wide compatibility. Whether you use Pro Tools, Cubase, Nuendo, Logic Pro, Digital Performer and more, UAD-2 plug-ins can inject the character and quality of classic hardware into your mixes. Just install the software, connect the unit to an available Firewire 800 or 400 port, power up and start mixing. Developed by the industry's premier engineering team, and backed by frequent new software and plug-in releases, the UAD-2 is the processing platform of choice for many of the world's top musicians, producers and engineers.

Prism Sound Dream ADA-8XR. État : "Occasion" - ADA-8XR 8AD/8DA+AES - 8 analog In (XLR), 8 analog out (XLR), Carte AES-EBU Perfect Shape / Etat parfait  Years: 2016  Feel free to ask any questions:) ---------------------------------- Overview  The ADA-8XR is a multi-channel AD/DA converter that can be in numerous ways using to suit a very wide variety of applications. It can be a 16 channel AD converter, a 16 Channel DA converter or an 8 channel AD/DA converter. It can be a, or an AES/EBU / AES3 / SPDIF Digital to Analogue or Analogue to Digital converter. It can act as a high resolution for recording or post-production. Similarly it can work with a wide range of other popular Digital Audio Workstations (DAWs) including Logic, Cubase, Nuendo and others. In fact, there's not a lot it can't do when it comes to digital audio conversion.  Applications  The ADA-8XR is the top professionals' converter of choice in the most exacting applications in music and sound recording, mastering, broadcast and post-production. Offering the cleanest and most transparent conversion available, the ADA-8XR is ideal for producers, engineers and songwriters wanting to produce top-quality results when recording, tracking & overdubbing, mixing to stereo or surround, mastering and monitoring. The ADA-8XR is perfect for recording vocal, single instruments, drums or orchestra and is just as much at home providing multiple outputs for external analogue summing. It is in use in the top studios around the world as well as being used in numerous film sound tracks.  Design Philosophy  The ADA-8XR takes the philosophy of the widely-acclaimed Prism Sound converter range a stage further: Now, the goals of ultimate sound quality, and un-matched versatility have been realised in a modular multi-channel, 24-bit 192kHz-capable format. The ADA-8XR provides A/D and D/A conversion and the essential digital interfaces with a stereo monitor mix output in digital and analogue formats.  Clocking and Synchronization  Unlike most other converter systems, the ADA-8XR is ideal as a master clock for your entire system, whether running from its precision internal reference or from an external source. No external clock source can improve the performance or influence the sound of the ADA-8XR. In addition, the ADA-8XR can run in Pro Tools Loop Sync mode, or lock to AES3, AES11 or Wordclock. The ADA-8XR delivers your recordings with perfect transparency, whatever the setup.  Configuration options  The ADA-8XR is a modular system and this provides great flexibility when creating systems with larger numbers of channels. Whether you need just a few channels of high-quality conversion or large a multi-track setup, the ADA-8XR is the natural choice. Using combinations of the basic system options and the range of digital interfaces you can build the system that perfectly matches your requirements. For more detail see the section.  ADA-8XR Summary Channel Configurations  - Up to 16 channels of state-of-the art 24-bit, 192kHz conversion in one great-sounding 2U package. - Choice of 8AD plus 8DA; 16AD; 16DA or D-D only configurations. - Dual-path architecture allows independent operation of two 8-channel paths: - Each path (bank of 8 channels) can be assigned to either record or play functions; - Each path can have independent clock references at different sample rates if desired; - Each path is independently configurable; - Each path can drive analogue and digital outputs simultaneously if desired - Allows Source Monitoring with simultaneous A/D and D/A conversion. - Electronically balanced, transformerless, galvanically isolated XLR analogue inputs and outputs ensure freedom from noise pick-up and crosstalk, with software-controlled balance and line-up; - Prism Sound 'Over-killer' selectable on analogue inputs: the best-sounding gentle limiting for louder masters - with no 'overs'; Dig