Radial engineering twin

RADIAL ENGINEERING - RELAY-XO. État : Occasion très peu servi. Commutateur de signal symétrique - Commute le signal du micro de sonorisation vers l'intercom pour techniciens ou musiciens - Convient également pour 2 entrées séparées sur le mélangeur avec traitement du signal différent - Entrée micro / line XLR  - Entrée combo XLR / jack 6,3 mm pour de contrôle à distance (pédale, GPI...) - Sorties XLR A et B - Interrupteur de masse commutable - Fonctionne avec alimentation 15V DC fourni Caractéristiques: - Circuit Passif avec commutation par relay et possibilité de télécommande - Réponse en fréquences 10Hz ~ 100kHz - THD - Plage dynamique >140dB - Impédance d'entrée et de sortie Dépendant de la source - Réjection en mode commun -106dB - Entrée max +26dBu - Gain 0dB - Niveau de bruit -115dBu - Alimentation 15VDC, 30mA, pin centrale (+)

Autre matériel de studio Sono & Matériel de studio Code EAN: 0676101035434 En-tête / Fabricant: Radial Type de Produit: Autre matériel de studio Titre: RADIAL ENGINEERING - TWIN-ISO Origine_import: hightech_minimaliste

Boîte de direct Sono & Matériel de studio Code EAN: 0676101036820 En-tête / Fabricant: Radial Type de Produit: Boîte de direct Origine_import: hightech_minimaliste Titre: RADIAL ENGINEERING - PRO AV2

Boîte de direct Sono & Matériel de studio Code EAN: 0676101040599 En-tête / Fabricant: Radial Type de Produit: Boîte de direct Titre: RADIAL ENGINEERING - USB-PRO Origine_import: hightech_minimaliste

El pedal de guitarra BigShot ABY de Radial Engineering permite a los músicos cambiar entre dos amplificadores o rutas de señal con facilidad. Es compacto y está construido con componentes de alta calidad para un sonido claro. Con dos entradas y dos salidas, es ideal para guitarristas y bajistas que necesitan cambiar rápidamente entre diferentes rutas de señal. El pedal está en excelentes condiciones y sigue sonando como nuevo. Si buscas un pedal ABY de alta calidad a un precio razonable, el BigShot es la solución perfecta.

Préampli micro à lampe en module API 500. Made in Canada. Gain de l’étage d ‘entrée micro jusqu’à 60dB Inversion de phase Gain (charge) de la lampe pour ajuster entre un son direct linéaire et un son chaud très doux. Fonction Air si vous souhaitez un son plus aérien (brillant). Filtre coupe bas 80Hz Alim phantom 48V Transformateur Jensen. Lampe 12AX7 en 140V. Comme neuf (voir photos) utilisé dans mon home studio uniquement à la maison, non fumeur. Sous garantie jusqu’en août 2023. Facture fournie. Boîte d’origine. Vacuum Tube preamp API 500 module. Made in canada. Input gain up to 60dB Passe invert Tube gain from neutral to warm and very smooth. Air function for more brightness and aerial sound. Low cut filter 80 Hz 48V phantom power Jensen transformer. 12AX7 valve at 140V. As new (see photos) used only in my no smoking home studio. Warranty up to 2023 August Invoice included. Original box.

Professional sound at its best.   The CD 3000 3000W Power Amplifier combines a linear power supply and a Class D output to deliver Crest power in a compact and cost-effective package. The CD 3000 is very versatile, whether powering nightclub systems or touring bands.   A traditional linear power supply is used in the CD Series. Because of the efficiency of the switching output stage, the transformer does not need to be big or heavy. This gives the CD Series an advantage in delivering huge power in a compact package. The efficiency of the output stage also gives the power supply the ability to handle heavy duty cycles without compromising sonic integrity.   Crest Audio's engineering has also maintained sonic quality while incorporating the advantages of a switching output stage. High-power Class-D topology is the key to its efficiency and low operating temperature. An additional advantage is its low power consumption.   Features     Dramatically reduced net weight     Linear power supply / Class D output stages     Very low current draw     Latest generation of high-speed, mosfet output devices     Cooled by variable-speed fan with back-to-front airflow     Inputs: balanced female XLR, 1/4" TRS combi jacks     Outputs: Speakon and five-way binding posts     Mode selector switch for stereo, parallel and bridged-mono operation     Ground-lift switch and rear panel circuit breaker     Recessed, stepped attenuators with removable knobs     16-gauge steel chassis, cast aluminum front panel     TourClass protection circuits     ACL (Active Clip Limiting) prevents speaker damage by providing gentle gain reduction when signal approaches the clipping threshold     IGM (Instantaneous Gain Modulation) monitors speaker loads to detect conditions that may over-stress output devices, allowing safe operation into nominal 2 Ohm speaker loads     AUTORAMP gradually increases gain to the attenuator level-settings when the amplifier is turned on, preventing abrupt turn-on levels     Other protection features include: short circuit, DC voltage, comprehensive thermal management, current in-rush turn-on/off transient and sub/ultrasonic input     Five-year warranty Specifications     Stereo Power 8 Ohms: 800 Watts     Stereo Power 4 Ohms: 1500 Watts     Stereo Power 2 Ohm: 1800 Watts     Bridged Power 8 Ohm: 3000 Watts     Maximum output voltage: 85V rms     Frequency response 1W @ 8 ohms: 20Hz—20khz, +/-1db     Power bw rated power @ 4 ohms, 1% THD+N: 20Hz—20khz, +/-1db     THD + N:     Imd; SMPTE/DIN 4:1 (60 Hz / 7 khz):     Damping factor: 400:1 @ 8 ohms (20 Hz to 100 Hz)     Input CMRR: >60db @ 1khz     Gain / input sensitivity @ 4 ohms: Selectable: x20, x40, or.775 V for full rated output power     Input impedance: >20kohms balanced, >10kohms unbalanced     Hum and noise: > -100db, A-weighted below rated power @ 4 ohms     Crosstalk: > -60db below max rated power (1khz)     Class: D     Power supply: Linear with toroid transformer     Circuit breaker rating (120V/230V): 20A /12A     Current draw (120VAC) 1/8 power, 4 ohms: 7.0A     1/3 power, 4 ohms: 14.0A     At idle: 1.5A     Thermal emissions 1/3 Power, 4 ohms BTU / hr: 1024     Cooling: Back to front via variable speed DC fan     Input connectors: balanced female XLR, 1/4" TRS, unbalanced 1/4" TS on Neutrik combo connectors     Output connectors: Five-way "touch-proof" binding posts and Neutrik Speakon connectors (which presents both outputs on the A Speakon for bi-amplified applications)     Controls: front panel: twin recessed stepped attenuators, power switch     Rear panel: signal ground-lift, mode select, gain select, circuit breaker     LED indicators: signal level (5 element bargraph), protect, active, ACL / IGM     Construction: 16-gauge steel chassis, cast aluminum front panel - optional handles available     Dimensions (W x H x D): 19" x 3.5" x 1