Real power led floating

490mm LED Backlight Strip Kit Update 22 Inch CCFL LCD Screen To LED Monitor ZH This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. Le 06-févr.-20 à 21:47:10 Paris, le vendeur a ajouté les informations suivantes:

This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.   Le 17-janv.-20 à 05:37:10 Paris, le vendeur a ajouté les informations suivantes:

B140HAK02.5 Ecran LCD LED pour ordinateur portable FullHD 1920x1080 14.0 pouces La description B140HAK02.0 B140HAK02.5 14.0 inches FullHD 1920x1080 IPS 40pins laptop LED LCD Display Compatible Product Line: B140HAK02.0 or B140HAK02.5 Size: 14.0 inches Resolution: 1920x1080 Connector: EDP 40pins Notice: 1.Please install it Very Professionally, if Not, Please Do Not Try. (You need to Pull Off the Power Adapter & Battery Cable when install) 2.Please check the Real Photos carefully before you purchase, the Size, Resolution and Connector Type must be same 100%. Shipping: Shipping by DHL Express (Normally we will declare the lower price on invoice for customs) Payment Policy: The price and shipping & handling cost we required on Seller do NOT include any customs duty or tax, Buyers should be responsible for the tax or custom of their purchase. Warranty: Provide a 120-day warranty against any manufacturer defective such as dead-on arrival (DOA), lines, video failure, and backlight outage. We do not warranty against broken, damaged or mishandled part. Caractéristiques Ligne de produit compatible: B140HAK02.5 with TOUCH Taille: 14.0 pouces Résolution: 1920x1080 Connecteur: EDP 40pins (Livraison: Expédition rapide 5-8 jours ouvrables (Garantie ： 90 jours). Aucun outil ni outil. Chaque article a été testé avant expédition.) Ceci est un écran seulement (pas un ordinateur portable). Il sera bien testé et emballé avant l'expédition. 3 mois de garantie fournis contre le problème de qualité. S'il vous plaît veuillez vérifier votre modèle et la résolution à nouveau avant d'acheter. Si vous ne savez pas si vous avez besoin du bon article, veuillez nous contacter avec un modèle spécifique et des images de votre écran d'origine. Marque: POWVANU Référence constructeur: screen-0002 Couleur: Or Taille de l'écran: 14 Pouces Journées de manutention Nous expédierons toutes les commandes dans 1 jour ouvrable de paiement. Livraison Nous ne livrons pas en dehors de la France continentale. Politique de retour Tous les articles sont admissibles pour les retours dans les 60 jours suivant la réception. L'acheteur est responsable de l'expédition de retour sur n'importe quel article qui n'est pas endommagé. Retour d'information Nous prenons notre réputation au sérieux, nous achetons et vendons en ligne, nous comprenons donc la valeur de la confiance. Si vous n'êtes pas satisfait de votre commande, veuillez nous contacter et nous travaillerons avec vous pour le résoudre à votre satisfaction.

For sale used QNAP TS-253B NAS, well taken care of and in excellent condition. No HDD/SSD is included, you will have to add your own in order to use the NAS. Included: - QNAP TS-253B NAS - Power supply - Ethernet cable - HDMI cable The item will be carefully packed and sent with tracked and insured shipping. SPECIFICATIONS CPU Intel® Celeron® J3455 4-core 1.5 GHz processor (burst up to 2.3 GHz) CPU Architecture 64-bit x86 Graphic Processors Intel® HD Graphics 500 Floating Point Unit Yes Encryption Engine Yes (AES-NI) Hardware-accelerated Transcoding Yes System Memory 8 GB SODIMM DDR3L (2 x 4 GB) Maximum Memory 8 GB (2 x 4GB) Memory Slot 2 x SODIMM DDR3L For dual-DIMM configuration, you must use a pair of identical DDR3L modules. Flash Memory 4GB (Dual boot OS protection) Drive Bay 2 x 3.5-inch SATA 6Gb/s, 3Gb/s The system is shipped without HDD. For the HDD compatibility list, please visit https://www.qnap.com/compatibility/ Drive Compatibility 3.5-inch SATA hard disk drives 2.5-inch SATA hard disk drives 2.5-inch SATA solid state drives Hot-swappable Yes M.2 Slot Optional via a PCIe adapter SSD Cache Acceleration Support Yes Gigabit Ethernet Port (RJ45) 2 Expandable with an optional PCIe adapter 10 Gigabit Ethernet Port Optional via PCIe expansion card Optional via PCIe expansion card Wake on LAN (WOL) Yes Jumbo Frame Yes PCIe Slot Slot 1: PCIe Gen 2 x2 PCIe bandwidth limitations will restrict the NAS 10GbE performance. USB 3.2 Gen 1 port 5 (Type-A ports) USB 3.2 Gen 2 (10Gbps) Port Optional via a PCIe expansion card USB QuickAccess 1 x USB 3.2 Gen 1 Type-C SDXC Card Reader 1 IR Sensor (RM-IR004, RM-IR002, b'&' MCE) HDMI™ Output 2, HDMI™ 1.4b (up to 3840 x 2160 @ 30Hz) Audio Input 2 x 3.5mm dynamic microphone input jacks Audio Output 1 x built-in speaker, 1 x 3.5mm line out jack (for amplifier or headphone amplifier) Form Factor Tower LED Indicators Power/Status, LAN, USB, HDD1-2, SD card, USB QuickAccess LCD Display/ Button Monochrome OLED display with capacitive sensing Enter and Select buttons Buttons Power, USB copy, Reset, Capacitive touch buttons (select, enter) Dimensions (HxWxD) 6.61 × 4.13 × 8.9 inch Weight (Net) 3.68 lbs Weight (Gross) 6.22 lbs Operating Temperature 0 - 40 °C (32°F - 104°F) Storage Temperature -20 - 70°C (-4°F - 158°F) Relative Humidity 5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F) Power Supply Unit 65W adapter, 100-240V Power Consumption: HDD Sleep Mode 13.07 W Power Consumption: Operating Mode, Typical 20.42 W Fan 1 x 70mm, 12VDC System Warning Buzzer Kensington Security Slot Yes En savoir plus Collaboration commerciale.

Lot 2 cartes mère x10sdv-4c-tln2f ver1.02 - 4 cores,8 threads Intel® Xeon® processor D-1520 occasion - fonctionnelles - retour sous 7 jours accepté Key Features Intel® Xeon® processor D-1520, Single socket FCBGA 1667; 4-Core, 8 Threads, 45W System on Chip Up to 128GB ECC RDIMM DDR4 2133MHz or 64GB ECC/non-ECC UDIMM in 4 sockets 1 PCI-E 3.0 x16, M.2 PCI-E 3.0 x4 (SATA support), M Key 2242/2280 2 10GbE LAN ports 6 SATA3 (6Gbps) ports via SoC 2 USB 3.0 ports (rear) 4 USB 2.0 ports (via headers) 1 SuperDOM, 1 COM, TPM header, GPIO and SMbus headers 12V DC Input and ATX Power Source Product SKUs MBD-X10SDV-4C-TLN2F X10SDV-4C-TLN2F Physical Stats Form Factor Mini-ITX Dimensions 6.7" x 6.7" (17.02cm x 17.02cm) Processor/Cache CPU Intel® Xeon® Processor D-1520. Single Socket FCBGA1667 supported, CPU TDP support 45W Cores / Cache 4 cores, 8 threads / 6MB cache System Memory Memory Capacity Up to 128GB Registered ECC RDIMM, DDR4-2133MHz Up to 64GB Unbuffered ECC/non-ECC UDIMM, DDR4-2133MHz, in 4 DIMM slots Memory Type 2133/1866/1600MHz ECC DDR4 ECC RDIMM and ECC/Non-ECC UDIMM DIMM Sizes 4GB, 8GB, 16GB, 32GB Memory Voltage 1.2V Error Detection Corrects single-bit errors Detects double-bit errors (using ECC memory) On-Board Devices Chipset System on Chip SATA SoC controller for 6 SATA3 (6 Gbps) ports; RAID 0,1,5,10 RSTe IPMI Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Network Controllers Dual LAN with 10Gbase-T Dual LAN with SoC Single LAN with Supports 10Base-T, 100BASE-TX, and 1000BASE-T, RJ45 output Single LAN with 1 Realtek RTL8211E PHY (dedicated IPMI) Graphics Aspeed AST2400 BMC Input / Output SATA 6 SATA3 (6Gbps) port LAN 2 RJ45 10GBase-T ports 1 RJ45 Dedicated IPMI LAN port USB 4 USB 2.0 ports (4 headers, Type A)) 2 USB 3.0 ports (2 rear) Video Output 1 port Serial Port / Header 1 COM Port (1 header) TPM TPM Header Expansion Slots PCI-E 1 PCI-E 3.0 x16 M.2 1 M.2 M-Key SATA/PCI-E 3.0 x4, 2242/2280 System BIOS BIOS Type 128Mb SPI Flash with AMI BIOS BIOS Features PCI 3.0 ACPI 5.0 USB Keyboard support Hardware BIOS Virus protection RTC (Real Time Clock) Wakeup SMBIOS 2.8 UEFI 2.4 Management Software Intel® Node Manager, IPMI (Intelligent Platform Management Interface) v2.0 with KVM support, IPMI2.0, KVM with dedicated LAN, NMI, SUM, SuperDoctor® 5, Watchdog Power Configurations ACPI Power Management CPU Fan auto-off in sleep mode Power-on mode for AC power recovery PC Health Monitoring Voltage +1.8V, +12V, +3.3V, +5V, Chassis intrusion header, HT, Memory, Memory Voltages, Monitors for CPU Cores, Supports system management utility, System level control, System temperature FAN 4x 4-pin fan headers (up to 4 fans), 4 fans with tachometer monitoring, Dual Cooling Zone, Fan speed control, Low noise fan speed control, Overheat LED indication, Pulse Width Modulated (PWM) fan connectors, PWM fan speed control, System level control, Thermal control tachometer fan connectors Temperature Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Monitor 2 (TM2) support, PECI LED CPU / System Overheat LED Other Features 12V DC or ATX Power Source, 4-pin 12v DC power connector, ACPI power management, ATX Power connector, Chassis intrusion detection, Chassis intrusion header, Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, Dual Cooling Zones, Hyper-Speed Technology hardware acceleration, M.2 NGFF connector, Node Manager Support, RoHS, SDDC, System level control, UID, WOL Operating Environment Operating Temperature Range 0°C ~ 60°C (32°F ~ 140°F)

RAD passif - vendue sans accessoires Key Features 1. Intel® Xeon® processor D-1521, Single socket FCBGA 1667; 4-Core, 8 Threads, 45W 2. System on Chip 3. Up to 128GB ECC RDIMM DDR4 2133MHz or 64GB ECC/non-ECC UDIMM in 4 sockets 4. 1 PCI-E 3.0 x16, M.2 PCI-E 3.0 x4 (SATA support), M Key 2242/2280 5. 2 10GbE LAN ports 6. 6 SATA3 (6Gbps) ports via SoC 7. 2 USB 3.0 ports (rear) 4 USB 2.0 ports (via headers) 8. 1 SuperDOM, 1 COM, TPM header, GPIO and SMbus headers 9. 12V DC Input and ATX Power Source Product SKUs MBD-X10SDV-4C-TLN2F - X10SDV-4C-TLN2F Physical Stats Form Factor - Mini-ITX Dimensions - 6.7b'"' x 6.7b'"' (17.02cm x 17.02cm) Processor/Cache CPU - Intel® Xeon® Processor D-1521. - Single Socket FCBGA1667 supported, CPU TDP support 45W Cores / Cache - 4 cores, 8 threads / 6MB cache System Memory Memory Capacity - Up to 128GB Registered ECC RDIMM, DDR4-2133MHz - Up to 64GB Unbuffered ECC/non-ECC UDIMM, DDR4-2133MHz, in 4 DIMM slots Memory Type - 2133/1866/1600MHz ECC DDR4 ECC RDIMM and ECC/Non-ECC UDIMM DIMM Sizes - 4GB, 8GB, 16GB, 32GB Memory Voltage - 1.2V Error Detection - Corrects single-bit errors - Detects double-bit errors (using ECC memory) On-Board Devices Chipset - System on Chip SATA - SoC controller for 6 SATA3 (6 Gbps) ports; RAID 0,1,5,10 - RSTe IPMI - Support for Intelligent Platform Management Interface v.2.0 - IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Network Controllers - Dual LAN with 10Gbase-T Dual LAN with SoC Single LAN with Supports 10Base-T, 100BASE-TX, and 1000BASE-T, RJ45 output Single LAN with 1 Realtek RTL8211E PHY (dedicated IPMI) Graphics - Aspeed AST2400 BMC Input / Output SATA - 6 SATA3 (6Gbps) port LAN - 2 RJ45 10GBase-T ports - 1 RJ45 Dedicated IPMI LAN port USB - 4 USB 2.0 ports (4 headers, Type A)) - 2 USB 3.0 ports (2 rear) Video Output - 1 port Serial Port / Header - 1 COM Port (1 header) TPM - TPM Header Expansion Slots PCI-E - 1 PCI-E 3.0 x16 M.2 - 1 M.2 M-Key SATA/PCI-E 3.0 x4, 2242/2280 System BIOS BIOS Type - 128Mb SPI Flash with AMI BIOS BIOS Features - PCI 3.0 - ACPI 5.0 - USB Keyboard support - Hardware BIOS Virus protection - RTC (Real Time Clock) Wakeup - SMBIOS 2.8 - UEFI 2.4 Management Software - Intel® Node Manager, IPMI (Intelligent Platform Management Interface) v2.0 with KVM support, IPMI2.0, KVM with dedicated LAN, NMI, SUM, SuperDoctor® 5, Watchdog Power Configurations - ACPI Power Management - CPU Fan auto-off in sleep mode - Power-on mode for AC power recovery PC Health Monitoring Voltage - +1.8V, +12V, +3.3V, +5V, Chassis intrusion header, HT, Memory, Memory Voltages, Monitors for CPU Cores, Supports system management utility, System level control, System temperature FAN - 4x 4-pin fan headers (up to 4 fans), 4 fans with tachometer monitoring, Dual Cooling Zone, Fan speed control, Low noise fan speed control, Overheat LED indication, Pulse Width Modulated (PWM) fan connectors, PWM fan speed control, System level control, Thermal control tachometer fan connectors Temperature - Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Monitor 2 (TM2) support, PECI LED - CPU / System Overheat LED Other Features - 12V DC or ATX Power Source, 4-pin 12v DC power connector, ACPI power management, ATX Power connector, Chassis intrusion detection, Chassis intrusion header, Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, Dual Cooling Zones, Hyper-Speed Technology hardware acceleration, M.2 NGFF connector, Node Manager Support, RoHS, SDDC, System level control, UID, WOL Operating Environment Operating Temperature Range - 0°C ~ 60°C (32°F ~ 140°F) En savoir plus Collaboration commerciale.

Sympodium™ Interactive Pen Display Physical Specifications All dimensions +/- 1/8" (0.3 cm).  All weights +/- 2 lb. (0.9 kg).  Console Features Software SMART Notebook software included.  See the SMART Notebook software specifications for a complete list of system requirements.  Software upgrades are available at www2.smarttech.com/st/en-US/Support/SBS/.  Technology Dual touch DViT™ (Digital Vision Touch) technology Pen Battery-free, tethered pen with LED status indicator.  Convenient magnetized storage location for easy access.  Pen Tool Buttons Lighted buttons for controlling the pen behavior: Left Mouse, Right Mouse, Digital Ink (Black, Blue, Red and Green) and Eraser Function Buttons Programmable buttons for accessing tools and applications: Floating Tools, Notebook Software, Screen Capture and Keyboard Room Control Button Button for launching room control interface menu Input/Output Interface Video IN HD15 (F) Video OUT HD15 (F) - internal distribution amplifier supports cable length up to 100' (30 m) Pen Tether 3.5 mm stereo jack USB USB B (×1) integrated USB 2.0 hub to connect the DT770 to your computer USB USB A (×3) integrated USB 2.0 hub to connect a mouse, keyboard or memory storage device Serial DB9 (F) VDC IN 4 pin mini-DIN NOTE: You can connect the interactive pen display to your computer using either a USB or serial connection. Power Supply Input: 100V–240V AC 50/60 Hz.  Output: 12V DC, 5A, 60W maximum. Power Management VESA DPMS Power Consumption Normal operation: Suspend/Standby mode:  Off:  LCD Features Display Screen a-Si TFT active-matrix LCD Interactive Screen Type DViT with Active Pen or Finger Touch (Dual Touch) Communication Interface USB 2.0 (high speed) Resolution 1280 × 1024 pixels Synchronization  Range Horizontal: 30 kHz–56.5 kHz Vertical: 50 Hz–70 Hz  Viewing Angle Horizontal 70° Vertical 60° Color Depth 16.2 million Color Emulation via FRC Contrast Ratio 300:1 minimum, normal to screen, center position Brightness Luminance of 200 cd/m² (typical) Input Video Signal Analog 0.7 Vp-p positive at 75 ohm Auto Adjustment Less than 2 seconds Display Response Time 8 milliseconds, typical On-Screen Display Brightness, Contrast Horizontal Position, Vertical Position, Clock, Phase, OSD off time, Control Language, Sharpness, Reset, Color Setting, Color Adjustment for Red, Green and Blue Storage and Operating Specifications Storage -4°F to 140°F (-20°C to 60°C) with 20% to 80% humidity, non-condensing Operation 41°F to 95°F (5°C to 35°C) with 20% to 80% humidity, non-condensing

Fully recapped Macintosh Colour Classic. The unit is fully working, no problems whatsoever. No screen burn or screen problems, pictures are unfaitfull, dark areas not present in real life ! The unit features a Asante Maccon Etheret Card (MCiLC-10T), software is installed. Main unit fully retrobrighted with perfect result, color looks like new. (12% creme peroxyde, 24 hours under led light) Logic board has been recapped fully with tantalum caps. Analog board recapped with new electrolytics caps. Lubricated floppy drive. New PRAM battery & PSU Fuse. Defects: One small part broken in one of the top corners (see photo) Dent in the plastic grid behind (see photo) Specs: - 10Mo RAM, 2x4Mo RAM modules (2Mb Onboard) - 80Mo Hard drive Comes with some softwares, netscape, screensavers, etc. What is included: - Main Unit (Macintosh Colour Classic) - Apple Keyboard II (Azerty) - Apple Desktop Bus Mouse - ADB Cable - Power Cable Everything is genuine Apple hardware.

Fully recapped Macintosh SE/30. The unit is fully working, no problems whatsoever, great sound ! No screen burn or screen problems, pictures are unfaitfull, dark areas not present in real life ! Logic board has been recapped fully with tantalum caps. Analog & PSU board recapped with new electrolytics caps. Main unit retrobrighted with good result, color looks like new. Retrobright method: 12% creme peroxyde, 24 hours under led light. Lubricated floppy drive. New PRAM battery 3.6 V Lithium. Specs: - 4Mo RAM, 4x1Mo RAM modules - 40Mo Hard drive Comes with some softwares, Tetris, games, etc. What is included: - Main Unit (Macintosh SE/30) - Apple Keyboard II (Azerty) - Apple Desktop Bus Mouse - ADB Cable - Power Cable Everty thing, cables included, is 100% Apple genuine. Feel free to ask any question  !

Fully recapped Macintosh Colour Classic. The unit is fully working, no problems whatsoever. No screen burn or screen problems, pictures are unfaitfull, dark areas not present in real life ! The unit features a Asante Maccon Etheret Card (MCiLC-10T), software is installed. The hard drive has been replaced with a BlueSCSI board, 1Gb MicroSD card included with OS installed. Plug&Play ! Main unit fully retrobrighted with good result. (12% creme peroxyde, 24 hours under led light) Mouse & Keyboard also retrobrighted using the same technique! Logic board has been recapped fully with tantalum caps. Analog board recapped with new electrolytics caps. Lubricated floppy drive. New PRAM battery & PSU Fuse. Defects: One small part broken in one of the top corners (see photo) Dent in the plastic grid behind (see photo) Specs: - 8Mo RAM, 2x4Mo RAM modules. - 1Gb BlueScsi Hard Drive Comes with some softwares, netscape, etc. What is included: - Main Unit (Macintosh Colour Classic) - Apple Design Keyboard (Azerty) - Apple Desktop Bus Mouse II - Power Cable Everything is genuine Apple hardware. Beware, on some pictures a grey coiled cable can be seen, it is NOT included, the Apple Design keyboard included have a standard non coiled cable. Feel free to ask any questions !