Scsi host

Dell J4588 PERC 4 U320 SCSI PCI-X RAID Controller carte adaptateur Dell PERC 4/SC Single Channel U320 LVD SCSI RAID Controller 64MB Cache J4588 / C4372 / 1U295 PCI-X DELL PCI SCSI PERC4 64 MB J4588 Dell J4588 PERC 4/SC RAID controller is a high-performance, PCI to SCSI host adapter with RAID control capabilities Product Refurbished Visiter notre boutique et n'oubliez pas de nous ajouter a vos favoris ! !! N'hésitez pas à nous contacter pour plus de renseignement ou pour toute question. Faites nous une offre !!

Lot Carte PC/Xem 1MB PCI 50000493-02 neuve et cartes SCSI diverses. 1 carte PC/Xem 1MB PCI Host Bus Adapter Card 50000493-02 REV G. Elle neuve sous emballage blister (2,3 et 4ème photos) 3 carte SCSI ADAPTEC badgées COMPAQ. ADAPTEC SCSI CARD 39160 (5ème photo) 1 carte SCSI ADAPTEC SCSI CARD 29160 (6ème photo) 1 carte LSI LOGIC ULTRA320 (7ème photo) 1 carte SYMBIOS LOGIC SYM22802 (8ème photo) 1 carte IBM SERVERAID 4M 2-CHANNEL 64MB CACHE ULTRA160 SCSI (dernière photo) 1 carte COMPAQ 340855-001 SMART ARRAY PCI SCSI CONTROLLER ( dernière photo) 1 carte Adaptec Carte PCI SCSI AVA-2904E AIC-7856T PnP ID3426 (dernière photo) 1 carte LSI Logic 53C825/53C825A (dernière photo)

CableDeconn SFF-8643 Interne Mini SAS HD vers (4) 29pin SFF-8482 Connecteurs ave   Description Taille: 1m Specifications Side 1: Internal Mini SAS SFF-8643 Side 2: (4) 29pin SFF-8482 connectors with SAS 15pin Power Port Cable: 30AWG Cable Length: 1 Meters Cable Color: Black & Blue. Notice: Please note that Mini SAS (SFF-8643) is Host, 4 SAS 29 (SFF-8482) is target, Internal mini Serial Attached SCSI x4 (SFF-8643) to (4) x1 (SFF-8482) Serial Attached SCSI (controller based) fan-out cables Packing Contents: 1x CableDeconn SFF-8643 Internal Mini SAS HD to (4) 29pin SFF-8482 connectors with SAS 15pin Power Port 12GB/S Cable Warranty Policy: 18 Month worry-free warranty, Lifetime Technical Support 24 hr dedicated email customer support High quality, cutting edge technology at affordable prices Please note that Mini SAS (SFF-8643) is Host, 4 SAS 29 (SFF-8482) is target, Internal mini Serial Attached SCSI x4 (SFF-8643) to (4) x1 (SFF-8482) Serial Attached SCSI (controller based) fan-out cables,Before you buy this cable, please make sure the Mini SAS (SFF-8643) on your motherboard or RAID Controller. If the Mini SAS (SFF-8643) on your backplane, this cable will not work with them,Mini SAS (SFF-8643) connect to the controller, 4 SAS connect to the HDD (Hard Disc Driver),30-Day return for any reason, 18-Month warranty, Lifetime technical support and friendly customer service About us Payment Nous acceptons Paypal Shipping Nous livrons sous 3-4 jours Return Les retours sont gratuits sous 30 jours Copyright © GetProduct.io 2020.

P R O D U C T   D E S C R I P T I O N: For 1 PC | 32/64 Bit   All Languages Supported INSTANT DELIVERY | 1 PC USE AT A TIME |  ONE TIME LICENSE KEY  How does VMware Workstation Pro work?  VMware Workstation Pro works by creating fully isolated, secure virtual machines that encapsulate an operating system and its applications. The VMware virtualization layer maps the physical hardware resources to the virtual machine's resources, so each virtual machine has its own CPU, memory, disks, and I/O devices, and is the full equivalent of a standard x86 machine. VMware Workstation Pro installs onto the host operating system and provides broad hardware support by inheriting device support from the host.   What types of applications can I run in a virtual machine?  Any application that will run on a standard PC will run inside a virtual machine on VMware Workstation Pro. VMware Workstation Pro is the equivalent of a full PC, with full networking and devices — each virtual machine has its own CPU, memory, disks, I/O devices, etc. This allows you to run any application that runs on the supported guest operating systems, including Microsoft Office, Adobe Photoshop, Apache Web Server, Microsoft Visual Studio, Kernel debuggers, Firewalls, VPN software and much more.    Do I need to dual boot or repartition the disk?  No. VMware Workstation Pro uses your computer's file system and creates files that map to a virtual machine's disk drives, so there is no need to create a partition for each operating system. If you already have another operating system with dual boot installed on your computer, you can use VMware Workstation Pro to run the other operating system in a virtual machine on your host operating system. Instead of dual booting, you can run both operating systems simultaneously and seamlessly switch from one operating system to another with a click of your mouse.    How is each operating system installed?  Once you have installed VMware Workstation Pro, you "configure" a virtual machine by assigning it memory, disk, ports, and networking. You then power on that virtual machine with the operating system installation CD or ISO image. The virtual machine will boot, and the operating system will start its normal install procedure.    Does VMware Workstation Pro modify the host or guest operating systems?  No. Your host operating system environment treats VMware Workstation Pro like an application. No modifications need to be made to the guest operating system when it is installed on a virtual machine. Applications on the guest operating system run exactly as they do on your host machine.    What are virtual disks?  Virtual disks are the disk partitions of virtual machines. They are stored as files on the file system of your host operating system. One of the key features of VMware Workstation Pro is encapsulation. This means that complete environments are contained in a set of files, which can be copied, moved, and accessed quickly and easily. Since an entire disk partition is saved as a file, virtual disks are easy to back up, move, and copy. You can create virtual SCSI, IDE, and SATA disks as large as 8 TB.    Does a VMware Workstation virtual machine share the IP address of the host (NAT), or does it have its own IP address?  The virtual machine can use bridged networking to receive its own IP address (when available from a DHCP server), or it can use NAT and share the host's IP address. Also, host-only networking can be set to create an isolated virtual network. Lastly, network connections can be entirely disabled for complete virtual machine isolation.    What languages is VMware Workstation Pro available in?  Workstation Pro software and documentation is available in English and Japanese (Windows only).    Can

DELL QLogic QLE2692L-DEL Fibre Channel 16Gb HBA Low Profile Double Port - WVT0T. Dell Wvt0t Qlogic Qle2692l Hba 16gb Fc Dual Port Sfp Pci-e 3.0 X8 Host Bus Adapter. DELL: BK3210407-27 B Total Specifications: Physical Specifications Form Factor Low-profile Pcie Card (6.6 Inches × 2.731 Inches) Ports Dual-port Fc Host Bus Interface Specifications Bus Interface Pci Express(pcie) 3.0 X8 Host Interrupts Intx And Msi-x Compliance • Pci Express Base Specification, Rev. 3.1 • Pci Express Card Electromechanical Specification, Rev. 3.0 • Pci Bus Power Management Interface Specification, Rev. 1.2 Fibre Channel Specifications Throughput 16gbps Line Rate Per Port (maximum) Logins Support For 2,048 Concurrent Logins And 2,048 Active Exchanges Port Virtualization N_port Id Virtualization (npiv) Compliance • Scsi-3 Fibre Channel Protocol (scsi-fcp) • Fibre Channel Tape (fc-tape) Profile • Scsi Fibre Channel Protocol-2 (fcp-2) • Second Generation Fibre Channel Generic Services(fc-gs-2) • Third Generation Fibre Channel Generic Services(fc-gs-3) • Fibre Channel Physical Interface 5 (fc-pi5)

LSI Logic LSI7204EP (For Mac) PCI-Express Dual-Port 4Gb/s FC Fibre Channel Controller Card Envois Gratuit par mondial relay Product Description LSI7204XP-LC HBA 4Gb/s Fibre Channel PCI-X Adapter Affordable dual-channel 4Gb/s host bus adapter (HBA) offers twice the performance of 2Gb/s at a small premium Unsurpassed performance for your data-intensive and high-bandwidth applications  ​ Features Dual 4Gb/s port (800 MB/s, full duplex)   Pluggable multi-mode optics (SFP), LC style   64-bit/133 MHz PCI-X bus   Auto-speed 1, 2 or 4 Gb/s GigaBlaze® technology   End-to-end data integrity (T10 DIF support)   Concurrent SCSI and IP protocol   SCSI initiator, target, and initiator/target modes with support of 126 alias ALPAs   Auto-detects switch and loop connections   Over 100,000 I/Os per second   Fibre Channel-tape support   Proven Fusion-MPT architecture   ARM CPUs for Fibre Channel offload   Benefits Dual Channel Performance leading 4Gb/s operation   Low-profile PCI form factor for 2U servers   Backward compatible with PCI, 32-bit, and 33/66/100 MHz buses   Pluggable optics (SFP) for improved serviceability   Compatible with MyStorage™ adapter management software   Unlimited free software upgrades   Full suite of operating system drivers

Dell ucp-51 pwb u7511 REV A00 SAS Raid Controller Dell Perc 5i SAS RAID Controller +256mb Cache PCI-e UCP-51 PWB U7511 REV A00 GENERAL Host Bus: PCIe x8 Manufacturer: Dell, Inc. STORAGE CONTROLLER Interface: SAS Data Transfer Rate: 300 MBps Buffer Size: 256 MB Supported Devices: disk array (RAID) Channel Qty 2 RAID Level RAID 0, RAID 1, RAID 10, RAID 5, RAID 50 Processor Intel IOP333 Buffer Size 256 MB Interface Type Serial Attached SCSI !! N'hésitez pas à nous contacter pour plus de renseignement ou pour toute question. Faites nous une offre !! Visiter notre boutique et n'oubliez pas de nous ajouter a vos favoris !

Minolta Dimâge Scan-Multi F-3000 Film Scanner / US VERSION The Dimage Scan Multi is a desktop device about the size of a shoebox. It measures 7.9 x 16.1 x 4.9 inches (200 x 410 x 124 mm), and weighs about 13.3 pounds (6 kg). Interface to the host computer is via a high-speed SCSI-2 interface. Scanning resolution can be as high as 2820 dpi, this produces maximum image sizes of 2688x4032 pixels for 35mm. For medium-format film, maximum resolution on a 6x9 cm transparency is 2496x3712. The 10.8 megapixel resolution of the Dimage Scan Multi is even higher than you might expect, the Dimage Scan Multi's scan resolution of 2820 dpi is at the top of the range for 35mm desktop scanners. The Dimage Scan Multi captures a full 12 bits per pixel. Have a look at the last picture, i scanned it with the minolta from a kodak 400 tmax 35mm. It is in perfect condition, the mirror has been cleaned. Works super well with vuescan, the original software (available on the Konica-Minolta website) is less efficient if you are looking for perfect scans and especially simplicity of use. The lamp also works verry well, shows no signs of weakness. In the inside nothing to report. Supplied with: The 3 holders                        The power cable                        The scsi cable                        The masks                        Software and hardware manual