Short course on physical

I am selling an original SINAR rail It is the 15 cm type With Sinar cap on one side and a special end cap on the other side Making a useful length of 18,5 cm with no risk of camera sliding off Perfect for wide angle use Overall condition excellent (Almost as new) Of course You can also use this rail with 30 and 45 cm extensions Using this one with fixed end cap and the extension with Sinar end cap (+ 4,5 cm) Shipping: France  6 euros Europe (UE) 10 euros Else: Please ask

Walimex Pro Aptaris Universal XL MK II cage system to DSLM and DSLR Caméras Excellent état, comme neuf Dans sa boite d'origine avec sa documentation - innovative cage system that makes system and DSLR cameras suitable for accessories - height adjustable and therefore suitable for all common cameras such as Panasonic GH-4, Nikon D800, Canon 5D Mark III, etc. - new and larger handle with additional 1/4 inch and 3/8 inch tapped holes - Eight new 1/4 inch tapped holes on the TopPlate for added convenience - A variety of mounting options around the rig - Height adjustable between 81mm and 133mm inside dimensions - Many expansion and combination options - Made in Germany - Made of extremely light and stable aerospace aluminum PRODUCT INFORMATION Aptaris - makes system and DSLR cameras suitable for accessories The "Made in Germany" Cage-System Aptaris makes your system or DSLR camera suitable for accessories and thus enables professional results when filming and photographing. Suitable for all common cameras The walimex Pro Aptaris Universal XL Mark II Cage opens up even more possibilities. With its additional 1/4 inch and 3/8 inch threaded holes, accessories such as microphone or film light can be attached even more flexibly. The new and larger handle ensures even more wearing comfort. It also has two 1/4 inch and four 3/6 inch tapped holes. The Universal XL Mk II is suitable for all common cameras such as the Panasonic GH-4, Nikon D800 or Canon 5D Mark III. In short, for those whose hot shoe and tripod threads lie on one axis and do not exceed or fall short of the inside dimensions of the cage. Aptaris is simply attached to the camera via the hot shoe of the camera and the camera screw (1/4 inch thread). An absolute highlight is the height adjustment of the cage, which is done with four Allen screws. This fits the version for a lot of cameras. In addition, two small hooks on the camera plate, which can be individually adjusted depending on the camera, ensure an absolutely non-slip grip. Greatest flexibility in use Thanks to a large number of 1/4 inch threads on all sides and a 3/8 inch thread on the underside, a lot of accessories such as microphones or LED lights can be attached as desired. Additional flexibility in use is provided by the adjustable, supplied handle, which can be mounted at the top, bottom or side as needed. This is also the shooting near the ground possible. With the Manfrotto PL 501 standard adapter plate, Aptaris can also be mounted on a Manfrotto tripod. In any case, access to the battery compartment, memory card etc. remains unrestricted. Many expansion and combination options Aptaris is a system. That's why you can extend the cage with any number of accessories such as the Aptaris rod module or the shoulder rest module. The Rod Module gives you plenty of room to attach additional accessories such as a Follow Focus and a Mattebox. With a diameter of 15mm, the rods comply with the industry standard, so that the combination with all common accessories is possible. Thanks to the included Rodmodulplatte the rod module can easily be attached via a sliding mechanism on the Aptaris system. With the Aptaris shoulder rest module, you can cast a complete rig out of the cage with just a few simple steps - for even more flexibility, especially in mobile use. Of course, you can also extend Aptaris at any time eg with additional hot shoe adapters or a separate L-bracket. Livraison rapide et soignée

I'm selling this fully functional guitar amp: the legendary deacy amp of Brian May it's the same circuit as the original (thanks to KAT / Greg Fryer) 4 NOS germaniums / 2 audio transformers Sounds great, lot of feedback, sustain here is a very short record i've done with it it is short because i didn't take the time to perfectly sync all the 9  guitars on procession: https://soundcloud.com/veryfree/procession/s-SETN2 Really the sound of Queen / Brian May Of course you need a treble booster On the pictures you see 3 connections: 9v power supply / jack for guitar in / 2 wires for the output (to a hifi cabinet) Even a cheap one will sound ok (mine is 4ohm) ps: the 9v battery is not provided kind of ac30, vbm1, vox

Bang & Olufsen Cd-tape Adaptator Passif - Allows the recording of a CD onto cassette tape using the 2 connected units - Add CD, MP3 player or a Bluetooth adapter to update your legacy system - The CD-TAPE adaptor enables you to connect both a compact disc player and a tape recorder to your amplifier at the same time even if the amplifier has only one TAPE input as on the beomaster 1900, 2300 2400 & 2400-2 etc. - Connect the long cable with a DIN plug to the TAPE input on the amplifier. Connect the short cable with a DIN plug (female) to the tape recorder cable. Plug the cable with phono plugs attached to the compact disc player into the sockets on the CD-TAPE adaptor: L to L (left channel) and R to R (right channel). - Set the switch marked "DIN-LINE" on the side of the CD-TAPE adaptor in the position required for the signal level of your tape recorder.Press in the push-button on the CD-TAPE adaptor when playing compact disc player. When playing the tape recorder, the button must be released. If you record a compact disc on the tape recorder, the button must also be pressed in. - The CD-TAPE adaptor is specially desgined to fit the Beogram CDX, a Bang & Olufsen, first generation compact disc player. This means it can be placed underneath the CDX to the right and thus be almost invisible, without impeding the operation of the push-button. - The CD-TAPE adaptor can of course be used with any compact disc player with RCA (Phono) connections OR A BLUETOOTH ADAPTOR and still allow a DIN-connected line level input Manufactured: 1986 - 1986 CD Tape Adaptor type 5006 TVA RECUPERABLE Réf: magetat

Français / English Boitier de retour des ateliers Canon.  Un défaut de la prise USB a entrainé le remplacement de la carte mère et le nettoyage, vérification du boitier. Total de la remise en service: 500€, pris en charge par l'assurance ! Comme les photos l'indique, l'état est excellent. Moins de 30k déclenchements au compteur. La petite bande sous la façade avant est destinée à la protection d'avec la cage alu (OPTION +50€, non inclue) Accessoires inclus: courroie, poignée avec accus supplémentaire, chargeur. Seul défaut, un petit décollement de la couche supérieure de l'afficheur en bas à droite) En CLAIR CE BOITIER EST RECONDITIONNE PAR CANON AVEC UNE FAiBLE UTILISATION (30K) --------------------------------------------------------------------------------------------------------------------------------------------------------------- This Body is back from the Canon service center. A defective mini USB connector required the replacement of then entire mother bord and of course, full cleaning and calibration. Per the picture, you wil realize that the condition of the body is close to perfect. This is also because I requested to have the upper cover and display to to replaced as well The narrow strap at the base of the front body in meant to have the paint nicked by the Cage (CAGE IS A 50€ option) Accessoiries included: belt, spare battery, hand backet for more grip possibilities and autonomie The sole defect that you might detct on the picture us on the upper layer on the lower right corner of the screen. IN SHORT: THIS BODY IS REFURBIHSED BY CANON AND BENEFIT FROM A LOW USAGGE (30k)

Le payement pay-pal est acepté dans certaines conditions Contactez-moi pour toutes explications. The pay-pal buy is accepted but only conditons. Contated-me for all informations. En vente, rare en occasion avec les options embarqués. Pavane Level 3 (Silver) avec sa boite originale + carte I2s (déjà monté, parfait avec le streamer Ambre ou d'autres streamer compatible) + carte USB + carte MQA (installé, idéale avec Tidal) Prix neuf 6400€ avec les 3 cartes. Si vous recherchez un son naturel, non mécanique, avec tous les détails, le Pavane devra être dans votre liste. Frais de pay-pal 4% à la charge de l'acheteur Metrum Pavane Level 3 DAC silver for sale, Includes original box and accessories and card USB + card i2s (installed, compatibility with streamer Ambre ou other streamer compatiblity) + card MQA (installed for Tidal) Price new 6400€ with 3 cards. If you are seeking a natural, non mechanical sound, with all the detail I believe the Pavane is the one. Should you need any information and for shipping cost,  please contact us directly. Payments bank transfer or PayPal add 4% for the buyer Thanks for looking. Description With the goal of creating a very special DAC in mind the designers of Metrum Acoustics have developed a new DAC. It was an unprecedented challenge, which was eventually solved by introducing an entirely new chip, which has been exclusively developed by Metrum Acoustics. Behind the luxurious front more than new chips are concealed: The parallel driven R2R ladder networks as used in the eight DAC modules performs, especially when combined with our FPGA-driven “forward correction module”, on a higher level. This module splits up the audio samples for each channel into new separate data streams. Each dac cluster processes a portion of the data in the most linear region of the dac chips. The result of this process is an extremely high linearity, right down to -140 dB, which gives the Pavane a realistic 24 bit dynamic range. Due to the dual mono design over the entire frequency range an extremely high channel separation of 120 dB is realized. This contributes to the flawless positioning of instruments. In short, the Pavane is a DAC that has taken all the lessons and experiences that her designer has learned over the years, and combined them in an ambitious DAC that can fit in every system. It is musical, honors the Non-oversampling principle while simultaneously incorporating the technological progress that has been made over the years. Extreme NOS The Pavane by Metrum Acoustics Pavane is the company’s flagship DAC. The Forward correction module is splitting the 24 bit format into two new 12 bit streams. So you have a 12 bit stream which is the LSB (least significant bits) and the 12 bit DAC (most significant bits). The problem with 24 bits R2R ladder DAC is linearity and switching noise of the ladder network in the lower ranges. Therefore the LSB part will be pushed to the upper part of the ladder by the forward correction module. In other words, the LSB will be processed as MSB data. The advantage is that it will be processed in the area having the lowest noise, the best linearity and the lowest distortion. The result however is that on the analog side of these two clusters the volume of the LSB is equal to the MSB part which is wrong, of course. Therefore we have to attenuate the LSB part with 67 dB (equal to 12 bits) to let it match with the MSB part. The result of this attenuation is that switching noise is also attenuated for 67dB and that distortion and linearity in this range is the same as in the MSB part. All incoming data is passed through this “forward correction module” and the answer to “What’s it correcting?” is essentially low level linearity and noise. The USB receiver comes courtesy of M2TECH’s hiFaceTWO that supports up to 384kHz over I²S, which is fed di

Reducing my extensive SONY ES collection I sell this fully and very recently professionnally restored TA-N80ES. Full restoration has been done in October 2020 by renowned French vintage hifi specialist Audiovintage: the detailed report of the restoration is visible on its website at the date of October 18, 2020. It is the restoration report of this very one TA-N80ES, not someone else's ! The matching 750 Euros original invoice will of course come with the amp, and it is under full warranty for six months. These wonderful sounding amps can become quite temperamental with age, so buy an unrestored one at your own risk. Very light scratches, barely visible at short distance. Please don't ask for any other SONY device for sale, I sell them one by one. For International shipping please ask for quotation.