Sme tonearm cable van

Je me sépare de mon câble haut de gamme Audioquest Léopard de 1.2m en RCA-RCA qui est dans un état irréprochable !  Vendu complet avec son sac en velour de protection et sa boîte d'origine. Câble en argent pur ! Le summum de la communication entre la platine vinyle et le préphono ou l'amplificateur. Rare à ce prix et j'en ai qu'un seul à vendre ! Audioquest Leopard Tonearm RCA to RCA (1,2 m) Le câble de modulation Audioquest Leopard ToneArm pour cellule et platine vinyle a été conçu pour la transmission des signaux analogiques gravés sur disques à micro-sillon. Il est équipé de deux paires de connecteurs RCA mâles. Le câble RCA-RCA Audioquest Leopard ToneArm utilise les meilleures technologies brevetées par la marque américaine et offre un son d'une qualité irréprochable. Ce câble audiophile utilise des conducteurs en argent PSS (Perfect Surface Silver) dont la particularité est d'offrir une surface extrêmement régulière, grâce à un polissage intense. L'intérêt est de favoriser le transport des hautes fréquences, ces signaux électriques circulant principalement en surface du cuivre. L'isolation des conducteurs fait appel à la technologie FEP Air Tube Insulation. Conscient que le contact direct entre le cuivre et le matériau isolant est générateur de distorsion, Audioquest a enfermé les brins d'argent PSS dans une gaine en Fluro Polymère dans lequel de l'air a été injecté. Cette gaine étanche n'est ainsi pas en contact avec les conducteurs.  L'isolation est renforcée par une structure enveloppante mêlant des fiches couches de polymère et de carbone: c'est la technologie Noise Dissipation System (NDS). Ce procédé permet de protéger les conducteurs en cuivre de tout bruit électrique ou radio-fréquence, potentiellement nocif pour le signal musical transporté. Le câble RCA-RCA Audioquest Leopard ToneArm profite également du fameux système Dielectric Bias System (DBS) qui met en oeuvre un système de polarisation active de l'isolant, celui-ci étant parcouru par un champ électro-magnétique polarisant. Cette technologie surprenante a fait ses preuves sur nombre de câbles d'enceintes ou USB audio haut de gamme Audioquest, apportant un éclairage impressionnant sur les sons de faible amplitude. Enfin, les connecteurs RCA mâles du câble RCA-RCA Audioquest Leopard ToneArm sont réalisés en cuivre Red Copper plaqué argent et sertis à froid, afin d'éliminer toute soudure sur le chemin du signal. Les performances du câble Audioquest Leopard ToneArm sont tout bonnement excellentes et conviennent aux meilleures cellules MC et MM. - Caractéristiques Câble RCA à RCA mâles Argent Perfect Surface Silver (PSS) FEP Airtube Insulation Dielectric Bias System (DBS) Noise Dissipation System (NDS) Connecteurs plaqués argent

For sale tonearm SME 3012 série 1 Excellent condition No cable International shipping with tracking. Thanks

Any question to help you to finalize your choice, please ask. Thank you This is a sale for a legendary high praised among audiophile Setup that is now becoming very rare:  Luxman PD 441 Turntable + SME 3009 S2 Improved with removable Headshell and All original Parts !   - Please find all the information below. Thanks to read ALL the description -  +++ Introduction +++ Sorry in advance, for any mistakes, I am using internet, to make translation.  I am living in France and Cambodia, that is why I use my french count linked with my paypal and bank account in France, while my audio gear is in Cambodia, closer to Japan from where it comes, and where I spend the most of the year.  That is why you will see some not correct item location on the console, as I am obliged to use my french account, thanks for your understanding. I indicates you worldwide shipping fees through DHL postal services (insured online track-able) The item will be shipped from Cambodia (check tax and customs if needed)  For more accurate shipping rate send me your location, once the item is sent, the buyer become full responsible, this is a no claim no return sale, Thanks.  Many Thanks for your visit, wish you a good day, and don't forget to have a look at my other sales. Any question Please ask.   +++ Item Description +++ This is a sale for a legendary high praised among audiophile package that is now becoming very rare: Luxman PD 441 Turntable + SME 3009 S2 Improved Tonearm with removable Headshell  Luxman PD 441 Turntable (coming directly from Japan 100V) with removable armboard and original dust cover, original heavy rubber mat + SME 3009 S2 Improved tonearm with removable original S2 Headshell (with sme badge that is regularly sold alone for 100 to 200 $ !), including leadwires plus dedicated original phono cable, original IFC weight plus bed plate screws & rubber grommets... Sounds comes out nicely, arm lift is firm, tone arm height is easily adjustable, headshell is easy to remove and replace,..., I will send to the buyer all material related documentation for easy setup and items fine tuning.  Quick Testing Only, but everything seems working correctly, some deep cleaning could be done, the tonearm may be tighten at some points but I missed these very small screwdrivers that are needed to do it. Every pieces are 100% original ones, the items come with wears and tears due to their 40 years of audiophile services, so they are not perfect, but still are working great and provide an impressive sound quality ! Please Note That: As with every vintage gear, due to age: performance and working condition  may be altered at anytime, so consider having an audio shop not far from you, or being an experience DIY,  or take your own risks like me;-)   Description and Components History The original Big Luxman turntable. This belongs to Luxman's big push in all directions after the foundation of Luxman America and its 50th anniversary in 1975. Lineups started to be multiplied, the actual making of the components got spread over more suppliers and contractors and advertising took on more regular and lavish modes. In other words: this is Luxman's true "golden age", products-wise and sales-wise. The PD441 and PD444 are based on the same direct-drive engineering, the 441 being the single tonearm version and bestseller of the two. Center of the spinning is the Load-Free Spindle structure: by opposing two magnets inside the motor structure, the actual load applied to the bearing is lifted to a fifth of its normal value. The motor's name is MDS152C (or MDS-102C [mkI or mkII]). Magnets aren't added but the motor itself is structured so as to do the above - no leaks or perturbations of the necessary magnetic flux. The platter is however maintained at large and heavy specifications to deal with 5Hz...10Hz faster load variations. This system allows lightweigh

Any question to help you to finalize your choice, please ask. Thank you This is a sale for a legendary high praised among audiophile Setup that is now very rare! !:  Luxman PD 441 Turntable + SAEC W308 Tonearm + Micro Seiki CU-180 copper plate - All original Parts !  - Please find all the information below. Thanks to read ALL the description -  +++ Introduction +++ Sorry in advance, for any mistakes, I am using internet, to make translation.  I am living in France and Cambodia, that is why I use my french count linked with my paypal and bank account in France, while my audio gear is in Cambodia, closer to Japan from where it comes, and where I spend the most of the year.  That is why you will see some not correct item location on the console, as I am obliged to use my french account, thanks for your understanding. I indicates you worldwide shipping fees through DHL postal services (insured online track-able) The item will be shipped from Cambodia (check tax and customs if needed)  For more accurate shipping rate send me your location, once the item is sent, the buyer become full responsible, this is a no claim no return sale, Thanks.  Many Thanks for your visit, wish you a good day, and don't forget to have a look at my other sales. Any question Please ask.   +++ Item Description +++ This is a sale for a legendary high praised among audiophile package that is now becoming very rare: Luxman PD 441 Turntable + SME 3009 S2 Improved Tonearm with removable Headshell Luxman PD 441 Turntable (coming directly from Japan 100V) with removable armboard and original dust cover, original heavy rubber mat + SAEC W308 tonearm with removable original Headshell plus dedicated original phono cable, in addition to the well regarded Micro Seiki copper plate CU-180 (a few scratchs but nothing that affect the sound, see pictures)  Testing: everything is working correctly: https://youtu.be/Q-u6Sj7B2fs Every pieces are 100% original ones, the items come with wears and tears due to their 40 years of audiophile services, so they are not perfect, but still are working great and provide an impressive sound quality ! Please Note That: As with every vintage gear, due to age: performance and working condition  may be altered at anytime, so consider having an audio shop not far from you, or being an experience DIY, or take your own risks like me;-)   Description and Components History The original Big Luxman turntable. This belongs to Luxman's big push in all directions after the foundation of Luxman America and its 50th anniversary in 1975. Lineups started to be multiplied, the actual making of the components got spread over more suppliers and contractors and advertising took on more regular and lavish modes. In other words: this is Luxman's true "golden age", products-wise and sales-wise. The PD441 and PD444 are based on the same direct-drive engineering, the 441 being the single tonearm version and bestseller of the two. Center of the spinning is the Load-Free Spindle structure: by opposing two magnets inside the motor structure, the actual load applied to the bearing is lifted to a fifth of its normal value. The motor's name is MDS152C (or MDS-102C [mkI or mkII]). Magnets aren't added but the motor itself is structured so as to do the above - no leaks or perturbations of the necessary magnetic flux. The platter is however maintained at large and heavy specifications to deal with 5Hz...10Hz faster load variations. This system allows lightweight yet fully and inherently regulated moving parts. The chassis and feet mix materials to do away with resonances: two slabs of 3,2mm iron plates sandwiching a high-density chipboard for the base, neoprene rubber, springs, silicon grease, felt and iron rings for the high feet which are 10mm height-adjustable. Feature: interchangeable armboards ! These were made not à la Micro but custom engineered for/by

Bras SME 3009. Complet avec cellule câble,boîtier fixe (porte cellule)

Impeccable à tous points de vue. Aucune rayure ou trace d'utilisation. Fonctionnalité parfaite.  Le bras a été amélioré par le changement de la pièce maintenant les couteaux (initialement en plastique, elle est ici en cuivre) - voir photo. Je fournis pour 50 euros supplémentaires la planchette en bois (+ les trois vis) pour fixation sur une platine Thorens TD 124 (noir satiné). Le bras est proposé sans câble ni support de cellule (headshell). Pas de boîte d'origine, mais emballage très soigné si envoi.