Sub outputs

The Cara preamplifier is prefect for audiophiles looking for a quiet, fast pre-amplifier with multiple inputs and 4 channel outputs. This allows a biamped system or a speaker/sub combination to be control by the Cara Pre-amplifier. With a balance input and balanced output line drivers, the noise rejection on the inputs and outputs are very high and perfect for low noise systems. Built in a steel chassis for EMI/RFI protection, the Cara pre-amplifier will bring music details out, to deliver a greater musical experience. Pre-amplification is sometimes necessary when there is more than one source and when more than 1 output is necessary. Analog volume controls are much nicer than digital attenuation, with analog giving more details and longer decay. High attenuation capability allows the handling of high output devices like DAC and low output devices phono pre-amplifiers with moving coil cartridge. A low noise floor helps provide great music insight and better presentation. The Cara Pre-amplifier has dual outputs with independent relative volume setting, 4 inputs to select from, an analog volume control that goes from -99db to +15db in 0.5 db steps with a 10V operating headroom with a very low noise floor. This makes Cara an exceptional pre-amplifier with wide operational capability. Play your music with any source component and still get the best out of your whole stereo system. Features of the Cara preamplifier: - 2 pairs of outputs (4 channels) - Each output channel can be set to independent relative volume levels - Remote Control with mute, on/off for remote trigger (12V, 20mA), - Cardas XLR inputs, gold-plated chassis with rhodium plate metal body, teflon insulation and silver pins - External power supply with double fused inlet - Large LED display with -99 to +15db control in 0.5 db steps - Optional Isoacoustics GAIA III footers - Optional Synergistic fuses (2 required) Specifications of the Cara preamplifier - Input Voltage: +/- 10V - Output Voltage: +/- 12V - Frequency Response: 8Hz to 200kHz 0.1dB - S/N: 110dB - THD: 0.002% - Inputs: 4 inputs with individual gain presets - Outputs: 2 outputs with individual level presets - Volume range: -99db to + 15dB (0 to +115) - Input Preset Range: +/- 12dB - Output Preset Range: 0 to 115dB - Preset Max volume level: 0 to 115dB - Preset Min Volume level: 0 to 115 dB - Display Brightness settings: 1 to 9, and off - Display delay dim time range: 5 sec to 25 sec - Permanently saved settings - External Power Supply with 110V/240V - Remote Control - Display Size: 1.25" high x 6" wide, blue LED dot matrix - Remote Trigger: 12V

The TASCAM CD-RW901SL Professional CD Recorder has the connectivity and professional features needed by studio and installation professionals: AES / EBU inputs / outputs RS-232 control port automatic increment, at fixed intervals identification markers recorded on the CD The CD-RW901SL takes all the features of the TASCAM CD-RW900SL, adding analog XLR I / O, wired remote control, and other features demanded by professionals. The XLR (balanced) and RCA (unbalanced) outputs have dedicated input and output level settings, allowing instant changes. The digital inputs are in AES / EBU and S / PDIF format, and feature an automatic sample rate converter, ensuring compatibility with any signal. The CD-RW901SL even plays MP3 files, with their associated information (ID 3 tags). The Time Track Increment feature automatically increments the track number (Track ID) after a certain number of minutes (between 1 and 10), which is ideal for concert or conference recordings. The Key Original function changes the playback speed without changing the pitch. The PS / 2 keyboard input makes it easy to enter track titles (CD Text function), plus access to frequently used menus and transport functions with just one press of a button. Using Tascam CD recorders is easy - they're a smart choice for installers and demanding customers alike. Main features: Records on “pro” or “music” CD-R or CD-RW media (general public) NEW! Select reading speed, to improve readability of poor quality or damaged media 24-bit A / D and D / A converters Balanced analog inputs / outputs on XLR Unbalanced analog inputs / outputs on RCA S / PDIF digital inputs / outputs, coaxial and optical types Input automatic sampling frequency converter (in 44.1 kHz), deactivatable Independent left / right input level adjustment Digital volume control Synchronized recording function Function of automatic incrementation of the track number (ID Track) according to the level Time Track Increment function - increments the track number every 1-10 minutes Entering index marks NEW! Skip mode selection: skip by track, by index or by 1 minute periods Digital fade in / out adjustable from 1 to 30 s, in steps of 1 s (fade in / out) Rec Mute function (digital silence recording) Erase / unfinalize CD-RWs Continuous, single, random or programmed track play (up to 99 tracks) Play all tracks, a single track or part of a track (A-B) Auto Cue, Auto Ready, Call and Incremental Play functions Playing MP3 Files Burned to CD Play MP3 files in their directories Viewing information about MP3 files (ID3 tags) Reading speed adjustment (± 16%, in steps of 0.1 to 1%) Key potentiometer (± 6 semitones) Original Key function (change the tempo without changing the key) CD Text compatible PS / 2 keyboard port, for CD Text data entry and transport control RS-232C serial control port (9-pin Sub D connector) Parallel port Power-on Play Mode: Automatically plays CD when power is turned on, convenient for installation applications NEW! Relay recording with two CD-RW901SL Supplied with wired remote control Rackable 2 U

Ampli Home Cinema Primare SPA21 Titane (Livré avec sa télécommande) État : "Pour pièces détachées/ne fonctionne pas" Service de livraison : Autre livraison en 48 h ------------------------------------------------------                     FRANCAIS ------------------------------------------------------ Ce qui marche:  - L'ampli est en très bon état extérieur  - Tous les boutons en facade fonctionnent  - La télécommande est en excellent état  - L'ampli fonctionne encore uniquement sur la source analogique 1 (entrée par défaut quand l'ampli s'allume).   - L'ampli était configuré et a toujours été configuré en stéréo.  - L'écran LCD fonctionne correctement, on voit bien les changements de source, si c'est une source analogique ou digital. On voit aussi les changements de volume.   - On peut aussi changer la balance D/G  - On entend le fameux "clac" de changement de type de source (analogique/digital). Ce qui ne marche pas:  - Il a l'air de détecter les autres sources analogiques/digital mais aucun son de la source ne sort sur les enceintes   - Il a l'air de chauffer beaucoup. Il a toujours chauffé mais il est chaud même en veille... du coup je l'éteins toujours avec le hard-switch qui se trouve sous l'ampli. - Les sorties videos ne fonctionnent plus à priori et il n'est donc plus possible de changer les réglages (rajouter des enceintes ou changer le nom des sources). Cela fait longtemps que ce ne l'a pas fait, mais des fois à volume faible, le son peut sortir uniquement sur un canal G ou D. Il faut monter le son pour que les 2 canaux reviennent puis remettre le son à son volume initial. C'était peut-être mon DAC externe qui était à l'origine de ce problème, mais je préfère vous le dire. ------------------------------------------------------                     ENGLISH ------------------------------------------------------ What it's working:  - The receiver is in really good aesthetic conditions  - The remote control is like new  - The receiver still works with the first analog input. It's the only input that will reproduce sound (it's the default input when you turn on the receiver)  - The receiver was always used in stereo  - The LCD screen works fine, you can see that you are changing the source or volume and if your input is analog or digital.  - You can change the balance L/R  - You can hear the sound specific sound when you are switching the source from analog to digital (or the opposite). What it's not working:  - It looks like the receiver notice a change when you change the input but no sound goes to the speakers.   - The receiver is overheating for me. It was always warm but it's warm even on standby mode... so I always use the hard-switch under the receiver when I'm not using it - it seems that the video outputs don't work. Hence, it's not possible to change the settings anymore (add speakers, change the source name). At one moment (a few months ago), when the volume was quite low, the sound was going only on one speaker. Sometimes on the left, sometimes on the right. I had to put the volume much higher to recover the 2 channels and go back after to a my level. It was maybe my external DAC that have created this... but I prefer be honest. Spécifications techniques: - GeneralOutput power: 5 × 100W 8 Ω - Analog inputs 8 RCA.  - Digital inputs 2 RCA, 2 TOS-Link.  - Video inputs 4 composite, 2 S-Video, 2 component.  - Analog outputs Front (left and right), center, sub, surround(left and right), surround back (left and right).  - Analog record output 1 RCA (left and right).  - Digital outputs 1 RCA.  - Video outputs 2 composite, 2 S-Video, 1 component.  - Modes Dolby Pro Logic II / Dolby Digital 5.1 / DTS Neo:6 / DTS 5.1 / DTS ES 6.1 / DTS ES 6.1 Discrete  - Video NTSC/PAL  Analog data  - T

Ampli Hi-Fi rare Sansui AU 6900, haut de gamme et en bon état.  Révisé en 2018 chez Idées Electronique, spécialiste de la Hi-Fi vintage à Strasbourg.  Excellent ampli - préampli hifi de 1976 de 2 x 60 Watts. Phono x2, Aux x2, tape x2, tuner.  Possibilité d'utiliser la section préampli ou ampli de manière séparée. Connections pour deux paires d'enceintes. ---- Rare Hi-Fi amplifier Sansui AU-6900, top of the range and in good condition. Revised in 2018 by the shop "Idées Electronique", specialist in vintage Hi-Fi in Strasbourg. Excellent Hi-Fi amplifier - preamplifier made in 1976 in Japon 2 x 60 Watts @ 8 ohms. Phono x2, Aux x2, tape x2, tuner.  Possibility to use the preamp or amp section separately. Connections for two pairs of speakers. Pre Amplifier Inputs:Phono MM; Tuner; Tape I+II Quadro:no Signal/Noise High Level:>90 db Signal/Noise Phono MM:>50 db Outputs:2 REC OUT Equalizer Tone Controls:Bass; Middle; Treble Filters:SUB BASS (600, 300 Hz); LOW; HIGH; NF-Muting (0/-20 dB) Loudness:ON/OFF; HIGH (2,4,8 kHz) Power Amplifier Speaker Outputs:1 x 2 Speakers; Phones Continuous Power 4Ω:62 + 62 (1kHz) Watts Continuous power 8Ω:62 + 62 (1kHz); 60 + 60 (20-20,000 Hz) Watts Frequency Response:5-40,000 (IHF, 8Ω) HZ Damping factor:80 / 8 Harmonic Distortion:0.1 % at rated output Physical Dimensions in mm:430 x 132 x 340 (w) x (h) x (d) Dimensions in Inches:16.93 x 5.19 x 13.38 (w) x (h) x (d) Weight:28.44 lbs / 12.9 Kg

Professional sound at its best.   The CD 3000 3000W Power Amplifier combines a linear power supply and a Class D output to deliver Crest power in a compact and cost-effective package. The CD 3000 is very versatile, whether powering nightclub systems or touring bands.   A traditional linear power supply is used in the CD Series. Because of the efficiency of the switching output stage, the transformer does not need to be big or heavy. This gives the CD Series an advantage in delivering huge power in a compact package. The efficiency of the output stage also gives the power supply the ability to handle heavy duty cycles without compromising sonic integrity.   Crest Audio's engineering has also maintained sonic quality while incorporating the advantages of a switching output stage. High-power Class-D topology is the key to its efficiency and low operating temperature. An additional advantage is its low power consumption.   Features     Dramatically reduced net weight     Linear power supply / Class D output stages     Very low current draw     Latest generation of high-speed, mosfet output devices     Cooled by variable-speed fan with back-to-front airflow     Inputs: balanced female XLR, 1/4" TRS combi jacks     Outputs: Speakon and five-way binding posts     Mode selector switch for stereo, parallel and bridged-mono operation     Ground-lift switch and rear panel circuit breaker     Recessed, stepped attenuators with removable knobs     16-gauge steel chassis, cast aluminum front panel     TourClass protection circuits     ACL (Active Clip Limiting) prevents speaker damage by providing gentle gain reduction when signal approaches the clipping threshold     IGM (Instantaneous Gain Modulation) monitors speaker loads to detect conditions that may over-stress output devices, allowing safe operation into nominal 2 Ohm speaker loads     AUTORAMP gradually increases gain to the attenuator level-settings when the amplifier is turned on, preventing abrupt turn-on levels     Other protection features include: short circuit, DC voltage, comprehensive thermal management, current in-rush turn-on/off transient and sub/ultrasonic input     Five-year warranty Specifications     Stereo Power 8 Ohms: 800 Watts     Stereo Power 4 Ohms: 1500 Watts     Stereo Power 2 Ohm: 1800 Watts     Bridged Power 8 Ohm: 3000 Watts     Maximum output voltage: 85V rms     Frequency response 1W @ 8 ohms: 20Hz—20khz, +/-1db     Power bw rated power @ 4 ohms, 1% THD+N: 20Hz—20khz, +/-1db     THD + N:     Imd; SMPTE/DIN 4:1 (60 Hz / 7 khz):     Damping factor: 400:1 @ 8 ohms (20 Hz to 100 Hz)     Input CMRR: >60db @ 1khz     Gain / input sensitivity @ 4 ohms: Selectable: x20, x40, or.775 V for full rated output power     Input impedance: >20kohms balanced, >10kohms unbalanced     Hum and noise: > -100db, A-weighted below rated power @ 4 ohms     Crosstalk: > -60db below max rated power (1khz)     Class: D     Power supply: Linear with toroid transformer     Circuit breaker rating (120V/230V): 20A /12A     Current draw (120VAC) 1/8 power, 4 ohms: 7.0A     1/3 power, 4 ohms: 14.0A     At idle: 1.5A     Thermal emissions 1/3 Power, 4 ohms BTU / hr: 1024     Cooling: Back to front via variable speed DC fan     Input connectors: balanced female XLR, 1/4" TRS, unbalanced 1/4" TS on Neutrik combo connectors     Output connectors: Five-way "touch-proof" binding posts and Neutrik Speakon connectors (which presents both outputs on the A Speakon for bi-amplified applications)     Controls: front panel: twin recessed stepped attenuators, power switch     Rear panel: signal ground-lift, mode select, gain select, circuit breaker     LED indicators: signal level (5 element bargraph), protect, active, ACL / IGM     Construction: 16-gauge steel chassis, cast aluminum front panel - optional handles available     Dimensions (W x H x D): 19" x 3.5" x 1

One of the best monitor controller ever !  In mint condition... New DAC The Quantum DAC is the 5th generation design from Crane Song and has less then 1pS jitter. The Quantum DAC uses 32 bit a converter and ASRC for jitter reduction up sampling to 211KHz. Avocet has always upsampled to 211KHz.  The reference clock has less then 1pS, 0.5pS typical 1Hz to 100KHz and a proprietary reconstruction filter for accurate time domain response. New Direct sub woofer outputs for each of the three output have been added. The output levels are now programmable in 0.25 db steps for speaker level matching Avocet  IIA is designed to solve the problems of accurate monitoring and volume control as required by workstation users, studios and mastering rooms alike. It is a stereo controller with three digital inputs, three analog inputs and a headphone system. It's comprised of a rack mounted unit and table top remote control. Avocet has many features including; dim, mute, phase, mono, and 16 bit truncation functions, plus a speaker select switch that sends line level balanced audio to one of three outputs. The six input sources have on the fly gain trim capability, and all digital signals are up-sampled and jitter reduced to ensure the highest accuracy during D/A conversion. The internal headphone amplifier can be fed from the program source or an external input. Provisions for a talk back function are included. Avocet  IIA can operate in surround up to 7.1, with the appropriate number of audio boxes in the system.

FREE WORLD SHIPPING WITH TRACKING ** Samson Expedition XP800 800 Watt Portable PA System with Bluetooth ** FOR SPARES / SOLD AS IS / NON WORKING / New Stock Arrived Damaged  PLEASE NO RETURN ** See Photos Attached ** SPECIFICATIONS: Overview: Samson's Expedition XP800 is an all-in-one sound system that offers excellent audio quality with quick and easy setup. Providing 800 watts of power, the XP800 features a lightweight, 8-channel powered mixer and two 8" speakers. For enhanced portability, the XP800 offers a unique speaker-locking design that allows the system and all its components to be packed up and transported as a single unit weighing just over 40 pounds. Powerful enough for musical performances, the XP800 includes features like Bluetooth® and USB connectivity (for optional Stage X USB Digital Wireless Systems), making it ideal for streaming music from mobile devices or managing events and presentations. Features include: • 800-watt portable PA system • Ideal for small to medium-sized venues (audiences of 60-100) • Packs up into a single portable unit that weighs just over 40 lbs • Bluetooth connectivity to wirelessly stream music • Dual 2-way speakers with 8" woofers and 1" tweeters • Removable 8-channel lightweight Class D power mixer • 16 presets of 24-bit digital effects with Send level control • Footswitch jack for remote FX control • Four Mic/Line inputs (XLR and 1/4") for microphones and other line level devices • Hi-Z input for direct guitar connections • Two stereo channels with 1/4", RCA and 3.5mm inputs • 2-band EQ on all channels • USB Wireless port for use with Samson's XPD USB Digital Wireless Systems (sold separately) • Phantom power for condenser microphones • Sub output for active subwoofers • Music/Speech switch for optimizing output EQ for speech or music playback • Integrated 1-3/8" speaker stand mount • Stereo monitor outputs with level control • 30-degree “kickback” design for using enclosures as floor monitors • Two 25-inch speaker cables included

English below Je vends cet ampli stéréo avec DAC intégré Onkyo A-9050 de 2x75w. Il est entrès bon état et fonctionne parfaitement. Constructionsolide et belle finition. Nombreuses fonctionnalités comme: Sortiepré-out, sortie sub, entrée phono pour platine vinyle, DAC intégré, doublebornier pour connecter 2 paires d’enceintes, sortie casque, réglages detonalité et de balance, … Vendu dans sa boite d’origine avec sa télécommande, la notice et le câble d’alimentation. Contactez moi pour plusd’informations ——— I’m selling this integrated 75wpc Onkyo A-9050 stereo amplifier with built-inDAC. Mint condition, works perfectly. Very well built and neat finish. Numerous features such as: Pre-out, sub-out, phono-in forturntable, built-in DAC, double speaker outputs, headphone-out,bass/treble/balance settings, … The amp is sold in its original box with remote control, users manual and powercable (EU plug). Pleasecontact me for further information

Tascam Portastudio 414 in very good esthetic condition and fully functional. A few minor marks and scratches on the cassette deck case.  Faders, knobs, tapehead and cassette deck cleaned and demagnetized with professional equipment. Sold with its original power supply and manual. - 8 inputs: 4 mono + 2 stéréo + 2 SUB IN - Outputs:  LINE OUT, MONITOR OUT, SYNC OUT - 2  AUX SEND FX OUT + section EQ (LOW + HIGH) - Pitch control +-12% — #tascam #portastudio #multi-track #recorder #cassette tapes #table mixage, #analog #fostex x-18 #fostex x-28 #tascam 414 #tascam 464 #portastudio #yamaha MT4X #yamaha MT8X

produit Une petite enceinte stéréo multiroom facile a placer. Avec une dynamique époustouflante et des basses profondes en abondance, l'addon c5 est plus performante qu'elle n'en a l'air - amplifier: 40w digital class d - tweeter: 2 x 3⁄4” textile dome - woofer: 4” long throw - outputs - sub output, usb dc out/max. 5v, 1000 ma - inputs - wi-fi + ethernet, bluetooth 4.0, rca and 3.5 mm stereo - frequency - range: 50 - 20,000 hz - crossover: 3,800 hz Générales EAN 7330117145015 Marque AUDIOPRO Couleur du produit Blanc Couleur - Motif Blanc Nombre de pièces 1 Dimensions et poids Longueur en cm 25.00 Largeur en cm 15.00 Hauteur en cm 13.00 Connectiques Bluetooth Oui WiFi Oui Nombre d'entrées USB 1 Nombre de port USB 1 Alimentation Alimentation Batterie Batterie intégrée Oui Caractéristiques du produit Puissance en watts (W) 40 Bande passante (en Hz) 20000 Réponse en fréquence maxi (en Hz) 20000 Réponse en fréquence mini (en hz) 50 Prise Jack 3.5 mm Oui Type de connectivité sans fil Bluetooth/Wifi Accessoires inclus Non communiqué