Supports ksix floating

The 21164 microprocessor is a superscalar pipelined processor manufactured using 0.35-μm CMOS technology. It is packaged in a 499-pin IPGA carrier and has remov-able application-specific heat sinks. A number of configuration options allow its use in a range of system designs ranging from extremely simple uniprocessor systems with minimum component count to high-performance multiprocessor systems with very high cache and memory bandwidth.The 21164 can issue four Alpha instructions in a single cycle, thereby minimizing the average cycles per instruction (CPI). A number of low-latency and/or high- throughput features in the instruction issue unit and the onchip components of the memory subsystem further reduce the average CPI.The 21164 and associated PALcode implements IEEE single-precision and double-precision, VAX F_floating and G_floating data types, and supports longword (32-bit) and quadword (64-bit) integers. Byte (8-bit) and word (16-bit) support is pro-vided by byte-manipulation instructions. Limited hardware support is provided for the VAX D_floating data type. Partial hardware implementation is provided for the architecturally optional FETCH and FETCH_M instructions. https://www.tldp.org/pub/Linux/docs/HOWTO/translations/fr/html-1page/Alpha-HOWTO.html http://www.cs.cmu.edu/afs/cs/academic/class/15740-f03/public/doc/alpha-21164-hw-ref-manual.pdf http://www.chipdb.org/img-samsung-alpha-21164-kp21164-600cn1-5813.htm

Sympodium™ Interactive Pen Display Physical Specifications All dimensions +/- 1/8" (0.3 cm).  All weights +/- 2 lb. (0.9 kg).  Console Features Software SMART Notebook software included.  See the SMART Notebook software specifications for a complete list of system requirements.  Software upgrades are available at www2.smarttech.com/st/en-US/Support/SBS/.  Technology Dual touch DViT™ (Digital Vision Touch) technology Pen Battery-free, tethered pen with LED status indicator.  Convenient magnetized storage location for easy access.  Pen Tool Buttons Lighted buttons for controlling the pen behavior: Left Mouse, Right Mouse, Digital Ink (Black, Blue, Red and Green) and Eraser Function Buttons Programmable buttons for accessing tools and applications: Floating Tools, Notebook Software, Screen Capture and Keyboard Room Control Button Button for launching room control interface menu Input/Output Interface Video IN HD15 (F) Video OUT HD15 (F) - internal distribution amplifier supports cable length up to 100' (30 m) Pen Tether 3.5 mm stereo jack USB USB B (×1) integrated USB 2.0 hub to connect the DT770 to your computer USB USB A (×3) integrated USB 2.0 hub to connect a mouse, keyboard or memory storage device Serial DB9 (F) VDC IN 4 pin mini-DIN NOTE: You can connect the interactive pen display to your computer using either a USB or serial connection. Power Supply Input: 100V–240V AC 50/60 Hz.  Output: 12V DC, 5A, 60W maximum. Power Management VESA DPMS Power Consumption Normal operation: Suspend/Standby mode:  Off:  LCD Features Display Screen a-Si TFT active-matrix LCD Interactive Screen Type DViT with Active Pen or Finger Touch (Dual Touch) Communication Interface USB 2.0 (high speed) Resolution 1280 × 1024 pixels Synchronization  Range Horizontal: 30 kHz–56.5 kHz Vertical: 50 Hz–70 Hz  Viewing Angle Horizontal 70° Vertical 60° Color Depth 16.2 million Color Emulation via FRC Contrast Ratio 300:1 minimum, normal to screen, center position Brightness Luminance of 200 cd/m² (typical) Input Video Signal Analog 0.7 Vp-p positive at 75 ohm Auto Adjustment Less than 2 seconds Display Response Time 8 milliseconds, typical On-Screen Display Brightness, Contrast Horizontal Position, Vertical Position, Clock, Phase, OSD off time, Control Language, Sharpness, Reset, Color Setting, Color Adjustment for Red, Green and Blue Storage and Operating Specifications Storage -4°F to 140°F (-20°C to 60°C) with 20% to 80% humidity, non-condensing Operation 41°F to 95°F (5°C to 35°C) with 20% to 80% humidity, non-condensing

General information TypeCPU / Microprocessor Market segmentDesktop Family AMD K6-2 CPU part number - AMD-K6-2/300AFR is an OEM/tray microprocessor Frequency300 MHz Bus speed66 MHz or 100 MHz Clock multiplier - 4.5 (66 MHz bus) - 3 (100 MHz bus) Package321-pin ceramic staggered PGA 1.95" x 1.95" (4.95 cm x 4.95 cm) AMD Package number26050 SocketsSocket 7 (66 MHz bus) Super 7 (100 MHz bus) Introduction date28-May-98 Price at introduction$281 Architecture / Microarchitecture MicroarchitectureK6 Processor coreChompers CPUID580 Manufacturing process0.25 micron 9.3 million transistors Data width32 bit Floating Point UnitIntegrated Level 1 cache size32 KB code with 20 KB pre-decode cache 32 KB writeback data Physical memory4 GB Pipeline6 stage Extensions and Technologies - MMX instructions - 3DNow! technology Low power features - Halt state - Stop Grant state - Stop Grant Inquire state - Stop Clock state Electrical / Thermal parameters V core2.2V ± 0.1V Min/Recommended/Max V I/O or secondary3.135V / 3.3V / 3.6V Minimum/Maximum operating temperature0°C - 70°C Minimum/Typical/Maximum power dissipation3.5 Watt (Stop Clock mode) / 10.35 Watt / 17.2 Watt Notes on AMD K6-2 300 MHz - This processor supports both 66 MHz (Socket 7) and 100 MHz (Super 7) bus frequences. For 66 MHz bus speed use 4.5x clock multiplier, for 100 MHz bus speed use 3x clock multiplier.