Switch works

Features: 100% brand new and high quality PC ATX Power Supply Reset 2 Switch Cable with 2 LED Lights For ATX POWER reset or switch with HDD and Power guiding Led light. Works with most desktop computer host cases with front panel button. Great as a replacement for your old or damaged ATX Power On Supply Reset Switch. Easy to setup,just connect the cable into the motherboard, and you can switch on power or reset the motherboard. Cable Length: 68cm(approx.) Package Includes： 1 X ATX PC Computer Motherboard Power Cable 2 Switch On/Off/Reset with LED Light 68CM Le 03-mars-21 à 10:26:25 Paris, le vendeur a ajouté les informations suivantes:

Canon remote switch 60-T3 with it's original box. Very good condition, tested, It works perfectly.

Disto équipée d’un simulateurde HP, et... de deux mémoires.. le top !  Nombre de réglages disponibles: switches Hi/Lo sur l’entrée et Amp/Line sur la sortie, drive,basses, aigus et niveau de sortie. Mais ce n’est pas tout puisqu’en basculant un simple interrupteur, très justement baptisé"sélecteur de paramètres", les  mêmes boutons permettent d’ajuster les médiums (EQ paramétrique: mid freq et High) ainsi que la taille et le corps dubaffle simulé par le Cabinet Résonator intégré. Après avoir ajusté les divers réglages, maintenez le switch appuyé environ cinq secondes et le tour est joué.Le même switch, sur scène, bascule d’un programme à l’autre. A l’écoute on n’est pas volé,c’est vraiment de l’hyper distortion, fournie, méchante et un tantinetmétallique, du gros son….                 Fonctionne avec piles ou alimclassic 9V de pédale.          AVEC BOITE ET NOTICE EN FRANÇAIS                      TRES BON ETAT

Interrupteur de façade original pour ampli intégré SCOTT A 436 très bon état, fonctionne parfaitement Prix pour une pièce Frais de port: 1,08€ par la poste Envoi protégé Original front switch for SCOTT A436 integrated amplifier in pretty good condition, works fine Price is for one unit Shipping to international: 1,50€ The item will be carefully packed

Control board SZTHTFTV1823_V1.3 for SE39UY04 TV The control board works perfectly. It was removed from a SE39UY04 TV which was updated with a X39 Rev2 Kit from Zisworks (http://www.zisworks.com). Foreign bidders are welcome! Do not hesitate to make offers!

I sell this ribbon microphone, the Beyerdynamic M260 N(C)S. Xlr version with switch. Works well, looks well.

Sell QUAD 33 preamplifier - serial number 84430. Date of acquisition: between 1979-1980. Sold as is - unrevised - untested. It starts electrically. A button is missing but the switch works. (1st orange button on the left - see photo). There are some signs of wear, especially in the corners. Some scratches on the metal shell. The white pimples have yellowed somewhat over time. Sent by International Colissimo. --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Vends préamplificateur QUAD 33 - N° série 84430. Date d'acquisition: entre 1979-1980. Vendu en l'état - non révisé - non testé. Il démarre électriquement.  Il manque un bouton mais l'interrupteur fonctionne. (1er bouton orange à gauche - voir photo). Il y a des quelques traces d'usures, notamment dans les coins. Quelques rayures sur la coque en métal. Les boutons blancs ont quelque peu jaunis avec le temps. Envoyé par Collissimo.

Pentacon 29mm f2.8 manual focus lens M42 mount. Not working, in poor condition, sold for parts or repair. This lens is in OK external condition, with some general signs of use and age. The glass is very scratched, particularly on the front, and there is a lot of dust inside. The rear lens group is completely loose, it falls out if the lens is upside down. The aperture blades are clean and free of oil, the iris is snappy, and the aperture ring clicks correctly through the stops. The auto/manual iris switch works. I often have similar or compatible items for sale, see my shop for details. Please contact me via messages if you have any questions, I’m happy to give advice. Delivery in France All items are sent by La Poste/Colissimo or Mondial Relay, depending on your choice at the checkout.  International shipping I can ship this item to any location listed in the postage section of this listing. I use La Poste, Colissimo, Chronopost, UPS or Mondial Relay, depending on the item and destination. International delivery from France will usually take approximately 5 to 7 working days, but it can occasionally be longer, especially at peak times. Please be aware of this before buying. Any import tax/duties in your country must be paid by the buyer. Tracking All items are sent tracked, with insurance where applicable. You will find the tracking number and delivery company used next to your item in 'My ', once it has been dispatched. You can track it through, but often the tracking will be more accurate and up-to-date on the website of the delivery company itself, so it's always better to look there. I try to photograph and describe my items as accurately as possible, and I package them very carefully, however in the unlikely event of a problem please let me know immediately and I will resolve it.

Lampe Speed-Lite pour prise de vue photo et vidéo, dans son emballage en polystyrène (le couvercle de l’emballage est absent), avec une rallonge torsadée de 5 m, le tout dans un sac en simili-cuir fabrication artisanale. La lampe halogène, munie d’un interrupteur, fonctionne. Bon état. Mots-clé: Flash, éclairage continu. Speed-Lite lamp for photo and video shooting, in its polystyrene packaging (the packaging lid is missing), with a 5 m twisted extension, all in a handcrafted imitation leather bag. The lamp, fitted with a switch, works. Good condition. Port avec assurance gratuit pour la France, Belgique et Luxembourg en Point Relais. Allemagne, Pays Bas, Espagne (sauf Canaries), Portugal, Autriche, Italie: 8 €. Envoi sitôt réception du règlement. Remise en mains propres possible. En savoir plus Collaboration commerciale.

Hifime UH1 Digital permet d'écouter de la musique en qualité (horloges TCXO, isolement galvanique) depuis un ordinateur via la sortie USB de celui-ci. La sortie HDMI I2S est compatible avec les 3D LAB Nano DAC. Entrées: optique, HDMI (I2S) et USB: un switch permet le choix entre Low (limite la fréquence à 96 kHz mais ne nécessite aucun driver sous windows) et High (driver windows 10 disponible sur le site de Hifime). Sorties: coaxial, optique, HDMI I2S compatible avec le 3D LAB Nano DAC. Un switch à 2 positions permet de rendre le DSD compatible avec plusieurs marques (pas essayé avec le 3D LAB). Spécifications (issues du site de Hifime): This is the UH1 without the DAC part. It is a pure high quality USB to i2s/DSD (over HDMI), COAX and OPT. This also has i2s/HDMI input (HDMI to USB). It is based on the Savitech SA9227 asynchronous USB receiver clocked by two TCXO oscillators which are used as the master clock to control the timing. This asynchronous USB transfer mode will give this device the responsibility to clock the data transfer instead of of your computer which has a clock of lesser quality with more noise and jitter introduced. It accepts up to 384kHz sample rates and 16/24/32 bit. No drivers are necessary on MAC and linux computers ! On Windows it can work without drivers up to 96kHz/24bit and with ASIO drivers up to 384/32. (Note that not all programs support ASIO). There is a switch that switches between Low and High sample rate mode. When set to Low, it works up to 96/24 with no drivers needed in Windows. It utilises the USB port for power, so no external power supply is required. Also the outputs and inputs are ground isolated from USB. USB INPUT: Asynchronous USB transfer with two TCXO as master clock USB receiver Savitech SA9227 Inputs are ground isolated from USB Supported sample rates: 32, 44.1, 48, 88.2, 96, 176.4, 192, 352.8 and 384kHz Supported bitrates: 16, 24 and 32 bits Works in either Full speed or High Speed USB transfer mode selectable with a switch (“L” “H”). No drivers required in MAC/Linux in both full and high speed modes. Windows ASIO needs drivers for High Speed mode only. We are using two (expensive) TCXO to act as master clock. 45.1584MHz for 44.1, 88.2, 176.4, 352.8MHz sample rates, and 49.152MHz for 32,48, 96, 192, 384kHz sample rates. The USB transfer is clocked by the TCXO directly. This is better than PLL async mode and offers close to zero jitter. PLL async mode has ~30ps jitter, which is already quite low, but not as good as when clocked from TCXO directly. SPDIF/OPTICAL/i2s(HDMI) INPUT: To USB/computer only! It doesn’t convert i2s to the COAX/SPDIF outputs. SPDIF Support samples rates up to 192kHz and 16/24/32 bit. DIGITAL OUTPUTS: DSD/I2S using HDMI port. Here is a linked drawing with the pinout for DSD and I2s. Note – this it not compatible with “normal” HDMI devices. The HDMI port is only used as a convenient connector and a way to send i2s balanced which improves signal quality. The DSD signal is also balanced. The pinout is made so that there is no harm done if you should connect it to a normal HDMI device. Optical output Coaxial output? Outputs are ground isolated from USB Size: 85x70x24mm

Clone de la TB-303 modifié par Circuitbenders, en parfait état, hormis les stickers qui se décollent un peu. Fonctionne nickel. Moded by Circuitbenders clone of the famous TB-303. Fully working. Demo here: https://youtu.be/GSebDXf9rP4 Here are the specs: The MAM MB33 Retro is the latest version of the MB33 / FAT FREEBASS clone of the infamous Roland TB-303. As standard it features all of the original TB-303 controls, and also has an external audio input through the filter and VCA. Overlapping midi notes gives you that essential 303 note slide, and any midi note with a velocity of 120 or more will trigger the note accent. Realistically if this synth was programmed correctly, you would be VERY hard pressed to distinguish between this unit and a real 303 in a mix. In a side by side comparison i'd say it sounds a little meatier than the Behringer TD3, with a little more girth and analogue weight to the sound. We have modded this machine with our circuitbenders Acid FM mods to give a huge range of extra sounds, without diluting the essential TB-303 character. MODS INCLUDE: VCO On/Off Switch: Normally when you plug a jack into the external VCF input, the MB33's VCO is automatically removed from the mix. As there may be occasions where you don't want this to happen, or situations such as when you're using the filter lock mod (see below) when you want to be able to turn the VCO on and off yourself, we've added a switch to add manual control of this. VCO Drive: The MB33 retro seems to be designed to slightly distort the output stage at full volume, much like the TB303 did. The Drive mod boosts this distortion savagely for some grungy acid techno sounds. This mod increases the maximum amount of distortion at maximum volume. The intensity of the distortion can be set using the normal volume knob. Resonance Boost Switch: An annoying issue with these machines is that the resonance never reaches self oscillation (but then neither did the TB303) and also drops off considerably when the cutoff is over 3/4 of the way up. We've solved this problem by adding the resonance boost switch. With this switch activated the filter starts to squeal with the resonance about halfway up, and then just screams with self oscillation at any higher settings. The resonance boost is especially effective when used with the VCF FM mods. VCF FM: Essentially VCF FM (Frequency Modulation) allows you to modulate the filter cutoff at audio frequencies to create all kinds of clanging cross modulation and bizarre alien splatters & sweeps. This effect works best with the resonance cranked up into self oscillation which is where the resonance boost mod comes into play. The FM controls allow you to select one of four sources for the FM signal. The first is the normal filter input socket round the back. This means you can run a sound through the filter section, but also use that sound to modulate the filter cutoff at audio frequencies at the same time. The second source is a new FM input jack on the right hand side of the case. Using this source allows you to run a sound through the filter from the VCF input or just use the internal VCO, and at the same time modulate the filter cutoff with an entirely independent sound source at the FM in jack. The actual audio from the FM in jack is not heard. The remaining two sources are the sawtooth and square wave signal from the main oscillator. These can be selected as sources completely independently of the setting on the VCO waveform knob The FM source select knob also has an 'off' setting. The amount of FM applied to the VCF is controlled using the VCF FM knob. VCF CV input: This mods adds 3.5mm jack on the right side of the machine that will accept an external CV to control the filter cutoff. The CV input should range from 0-5v. Higher voltages, or negative voltages are NOT recommended. This mod also adds a switch on the front to toggle between internal and external cutoff cont

Clone de la TB-303 modifié par Circuitbenders, en parfait état, hormis les stickers qui se décollent un peu. Fonctionne nickel. Moded by Circuitbenders clone of the famous TB-303. Fully working. Demo here: https://youtu.be/GSebDXf9rP4 Here are the specs: The MAM MB33 Retro is the latest version of the MB33 / FAT FREEBASS clone of the infamous Roland TB-303.  As standard it features all of the original TB-303 controls, and also has an external audio input through the filter and VCA. Overlapping midi notes gives you that essential 303 note slide, and any midi note with a velocity of 120 or more will trigger the note accent. Realistically if this synth was programmed correctly, you would be VERY hard pressed to distinguish between this unit and a real 303 in a mix. In a side by side comparison i'd say it sounds a little meatier than the Behringer TD3, with a little more girth and analogue weight to the sound. We have modded this machine with our circuitbenders Acid FM mods to give a huge range of extra sounds,  without diluting the essential TB-303 character.  MODS INCLUDE:  VCO On/Off Switch: Normally when you plug a jack into the external VCF input, the MB33's VCO is automatically removed from the mix. As there may be occasions where you don't want this to happen, or situations such as when you're using the filter lock mod (see below) when you want to be able to turn the VCO on and off yourself, we've added a switch to add manual control of this. VCO Drive: The MB33 retro seems to be designed to slightly distort the output stage at full volume, much like the TB303 did. The Drive mod boosts this distortion savagely for some grungy acid techno sounds. This mod increases the maximum amount of distortion at maximum volume. The intensity of the distortion can be set using the normal volume knob.  Resonance Boost Switch: An annoying issue with these machines is that the resonance never reaches self oscillation (but then neither did the TB303) and also drops off considerably when the cutoff is over 3/4 of the way up. We've solved this problem by adding the resonance boost switch. With this switch activated the filter starts to squeal with the resonance about halfway up, and then just screams with self oscillation at any higher settings. The resonance boost is especially effective when used with the VCF FM mods.  VCF FM: Essentially VCF FM (Frequency Modulation) allows you to modulate the filter cutoff at audio frequencies to create all kinds of clanging cross modulation and bizarre alien splatters & sweeps. This effect works best with the resonance cranked up into self oscillation which is where the resonance boost mod comes into play. The FM controls allow you to select one of four sources for the FM signal. The first is the normal filter input socket round the back. This means you can run a sound through the filter section, but also use that sound to modulate the filter cutoff at audio frequencies at the same time. The second source is a new FM input jack on the right hand side of the case. Using this source allows you to run a sound through the filter from the VCF input or just use the internal VCO, and at the same time modulate the filter cutoff with an entirely independent sound source at the FM in jack. The actual audio from the FM in jack is not heard. The remaining two sources are the sawtooth and square wave signal from the main oscillator. These can be selected as sources completely independently of the setting on the VCO waveform knob The FM source select knob also has an 'off' setting. The amount of FM applied to the VCF is controlled using the VCF FM knob.  VCF CV input: This mods adds 3.5mm jack on the right side of the machine that will accept an external CV to control the filter cutoff. The CV input should range from 0-5v. Higher voltages, or negative voltages are NOT recommended. This mod also adds a switch on the front to toggle between internal and external cutoff con

Hi, I get rid of my walkman collection.  Cassette sealed new never opened. - FUJI CASSETTE DR 90 IEC I / TYPE I NORMAL POSITION EXTRASLIM CASE - SONY HF 90 Good For CD IEC I / TYPE I High Fidelity for music & voice Position normal - TDK Type-II SF 60 Super fidelity Tape High Resolution High (CrO2) POSITION - SONY UX Chrome Class IEC II / TYPE II For CD 60 - AKAI MY-A1 (Not working): Walkman Baladeur radio cassette Stereo AM/FM. Noise reduction. Manufactured under license fromDolby Laboratories « Dolby » EQ control dolby NR Deluxe autoreverse - STYLANDIA (Item works great) Walkman Stereo personal cassette player High resolution - SONY  TCM-75V (Not working) CASSETTE-CORDER V.O.R MADE IN JAPAN. This unit doesn't operate. Motor makes noise but nothing happen                - SONYTCM 50DV (Micro does not operate) CASSETTE-CORDER 2X REC TIME CLEAR VOICE AUTO REVERSE VOR SWITCH –Tested. Micro out of order. Otherwise, this device works. Red light on - AIWA HS-TA176 (Item works great)  Tested. Stereo cassette radioplayer - PANASONIC RQ-L309 (Item works great) CASSETTERECORDER Fast PLAYBACK. item tested - SONY TCM-465V (Item works great) Cassette recorder Cue marker automatic MIC Sensitivity setting V.O.R clearvoice. Tested. Red light on - SONY TCM-S68V (Item works) but Press button is a little faulty therefore it is sold as not working) V.O.R Fast Playback.WALKMAN Cassette Recorder. Box and paper operating instruction included - SANYO TRC 1196 (Not working) recording auto reverse Voice Activated System Multi  Purpose Recorder – Motor makes noise butnothing happen Shipping cost: via Mondial relay France : 10 euros European Union: 20 euros Possibilité de remise en main propre sur Tremblay-en-France (93290). Happy bidding

Hi, I get rid of my walkman collection.  Cassette sealed new never opened. - FUJI CASSETTE DR 90 IEC I / TYPE I NORMAL POSITION EXTRASLIM CASE - SONY HF 90 Good For CD IEC I / TYPE I High Fidelity for music & voice Position normal - TDK Type-II SF 60 Super fidelity Tape High Resolution High (CrO2) POSITION - SONY UX Chrome Class IEC II / TYPE II For CD 60 - AKAI MY-A1 (Not working): Walkman Baladeur radio cassette Stereo AM/FM. Noise reduction. Manufactured under license fromDolby Laboratories « Dolby » EQ control dolby NR Deluxe autoreverse - STYLANDIA (Item works great) Walkman Stereo personal cassette player High resolution - SONY  TCM-75V (Not working) CASSETTE-CORDER V.O.R MADE IN JAPAN. This unit doesn't operate. Motor makes noise but nothing happen                - SONYTCM 50DV (Micro does not operate) CASSETTE-CORDER 2X REC TIME CLEAR VOICE AUTO REVERSE VOR SWITCH –Tested. Micro out of order. Otherwise, this device works. Red light on - AIWA HS-TA176 (Item works great)  Tested. Stereo cassette radioplayer - PANASONIC RQ-L309 (Item works great) CASSETTERECORDER Fast PLAYBACK. item tested - SONY TCM-465V (Item works great) Cassette recorder Cue marker automatic MIC Sensitivity setting V.O.R clearvoice. Tested. Red light on - SONY TCM-S68V (Item works) but Press button is a little faulty therefore it is sold as not working) V.O.R Fast Playback.WALKMAN Cassette Recorder. Box and paper operating instruction included - SANYO TRC 1196 (Not working) recording auto reverse Voice Activated System Multi  Purpose Recorder – Motor makes noise butnothing happen Shipping cost: via Mondial relay France : 10 euros European Union: 20 euros Possibilité de remise en main propre sur Tremblay-en-France (93290) ou Roissy (95). Happy bidding

Genuine sought after KLEMT Echolette BS40 in perfect working condition.  Early Marshall-type sounding machine (think old Jtm 45 style) made in Germany, all original, this great Amp delivers 40W of pure quality sound either for Bass or Guitar. Think British beat era, Hamburg boys.. early Yardbirds, Beatles, Kinks, Small Faces, Easybeats kind of bands that all certainly played on those ones..  It has a real clear and pure sound, with a lot of presence. Makes any guitar really shine.  And loves any pedal or thing you would add in the input ring. Just tried it back the recent days to give it a full check before putting on sell: anything works as it should, I think I already hate seeing it go away..  need to finance new projects and this beauty deserves to be played. Early sixties, solid, a real workhorse, this guy is also very convenient en easy to use:  - 4 jack entries on two channels (this machine would allow 4 musicians to join together in the crypt !) - 2 volumes (1 for each channel) - bass / mid / treble  - presence  - standby switch - 1 speaker output - impedance speaker selection switch (5/20) (think 8 / 16 ohms)   - upgraded up-to-the standards of today 220V cable - and last, but not least at all, the magical "Level / Pegel" potentiometer: this one works like a preamp volume, allowing you to choice the level of natural crunch of the beast Collectors condition I would say.  Anyway your chance to grab a great piece of sound machine in excellent condition.  Will ship anywhere, very well packed and fully insured. Pick-up is also possible, of course. West of France. Available on other platforms too, can't guarantee it is still available on  if sold simultaneously in some other place. Thanks for your visit. Any question welcome.

This is a 70's vintage and rare Foxx Fuzz Wa effect pedal. ** It has been very few used, there has been only, as far as I know, two previous owners who both used it from very rarely to almost never ** It has got four different Wah-Wah tones and also integrates a fuzz effect. It sounds really gorgeous, and due to its rarity, quite unique. * I've tested it basically and can tell that it works perfectly - and what a sound ! There are one 4-positions selector on the front to select wah envelope, and three knobs on the left side, presumably for tone, gain and whatever else. There are two 2-states switches: the pedal switch commutes between wah wah and volume control. The auxiliary switch commutes the fuzz effect. There is also an extra switch on the side (see photos) but I cannot figure out what it is used for. All the components, buttons, switchs, gear, board are all original, to the screws. It is really suitable as collector.    ** It is in overall exceptionally good condition, due to the fact it has been very rarely used since the 70's. I guess that you will not see one in a such good condition before long ** It is powered by a 9-volts battery (not provided). The pedal is sold without any other accessories, no manual, no box, no external power supply. The item ships from France (CE). Please note that depending on your country's law set, you may have to pay import taxes when the parcel is delivered. These taxes are not included in the price. The power battery connector is slightly damaged -the (-) (negative) plot is missing and needs to be added, but the unit is working as is, and the repair is really easy to make: just solder a negative plot pin to the battery connector, to reduce noise level by grounding the power supply of the unit, which is, in our case, a 9V battery.

This is a 70's vintage and rare Foxx Fuzz Wa effect pedal. ** It has been very few used, there has been only, as far as I know, two previous owners who both used it from very rarely to almost never ** It has got four different Wah-Wah tones and also integrates a fuzz effect. It sounds really gorgeous, and due to its rarity, quite unique. * I've tested it basically and can tell that it works perfectly - and what a sound ! There are one 4-positions selector on the front to select wah envelope, and three knobs on the left side, presumably for tone, gain and whatever else. There are two 2-states switches: the pedal switch commutes between wah wah and volume control. The auxiliary switch commutes the fuzz effect. There is also an extra switch on the side (see photos) but I cannot figure out what it is used for. All the components, buttons, switchs, gear, board are all original, to the screws. It is really suitable as collector.    ** It is in overall exceptionally good condition, due to the fact it has been very rarely used since the 70's. I guess that you will not see one in a such good condition before long ** It is powered by a 9-volts battery (not provided). The pedal is sold without any other accessories, no manual, no box, no external power supply. The item ships from France (CE). Please note that depending on your country's law set, you may have to pay import taxes when the parcel is delivered. These taxes are not included in the price. The power battery connector is slightly damaged -the (-) (negative) plot is missing (this is a repair which is really easy to make or you can just strand the negative wire in the negative plot of the battery).

SAGEM My dual radio 700 (internet radio) FM / Internet wifi and Ethernet / Usb only - no Dab - No Bluetooth Très bon état avec alimentation pour UK et Europe - Very good state like new with psu for UK and continental europe. Genuine remote controle - Télécommande d'origine fournie Fonctionne parfaitement, très bon son - Working perfectely, good sound. All the time the Sagem MyDual Radio700 is powered up even without a station selected the front screen will display a small top line of year, date and day with a large (four time the size) bottom line showing the time in 24 hour format. It is 20x10x14cm maximum, the right side is the larger being circular and the single speaker with a fine silver/grey mesh the rest of the unit is grey. The display is 7.3x3.5cm with white lettering on a blue background. Outputs on the back are for earbuds, liner out, Ethernet, FM aerial (supplied) and the power lead. There is a status LED that glows green but in most cases this will not even be seen and finally a push button on/off switch. Neither side or the bottom have any connections while the front has a USB stick socket between the LCD display and the speaker. This leaves the top this has a total of eight buttons, five arranged in the ubiquitous joystick combination and three others all clearly labelled. There is a 30 key remote control, however for most actions the eight buttons on top of the unit are all you need. The one exception I have found is entering your WEP or WPA code that needs the numeric (mobile phone type) input on the remote. It finds all the wireless networks in range you select the one you want and assuming it is encrypted then you enter your passcode. It remembers this so next time you return power to the unit although you need to move through the same screens and select the wireless network it then shows the passcode, here I think it should not display the actual code maybe just some dots as the passcode is there for anyone to see. Ethernet is simpler as it is just a matter of connecting an Ethernet cable between the unit and a router. There are literally thousands of Internet radio stations are these are split into Genres. On the Station list there are four choices Locations, New Stations, Popular Stations and Genres. There are 56 Genres listed, as regular readers will know jazz is my passion and there are 100 or these. Select what you want and after a few seconds of buffering you will be listening to what you have chosen, it could be in UK or America or New Zealand in fact anywhere in the world. I found the sound quality good. The FM radio was not as brilliant, there are two sensitivities and even with the supplied wire lead extended fully on the lesser setting it found three stations and thirteen in most sensitive so lots of stations are not found. It then lists the frequencies and in some cases the name of the station beside them. The actual reception quality varied. Lack of space prevents me from giving much detail about the other features, the Alarm Clock (choice of two) is easily set as in the Sleep Timer. The MP3 player works without problem and using it as a Media Server is logical. There is a twenty page Installation Guide that should get you going and also covers using Windows Media Player 11 on your PC. My one real gripe is your passcode being displayed anytime power is restored note I mean the back on/off switch and not the power switch on the top that is really only standby mode.

This is a 70's vintage and rare Foxx Fuzz Wa effect pedal. ** It has been very few used, there has been only, as far as I know, two previous owners who both used it from very rarely to almost never ** It has got four different Wah-Wah tones and also integrates a fuzz effect. It sounds really gorgeous, and due to its rarity, quite unique. * I've tested it basically and can tell that it works perfectly - and what a sound ! There are one 4-positions selector on the front to select wah envelope, and three knobs on the left side, presumably for tone, gain and whatever else. There are two 2-states switches: the pedal switch commutes between wah wah and volume control. The auxiliary switch commutes the fuzz effect. There is also an extra switch on the side (see photos) but I cannot figure out what it is used for. All the components, buttons, switchs, gear, board are all original, to the screws. It is really suitable as collector.    ** It is in overall exceptionally good condition, due to the fact it has been very rarely used since the 70's. I guess that you will not see one in a such good condition before long ** The pedal is sold without any other accessories, no manual, no box, no external power supply. The item ships from France (CE). Please note that depending on your country's law set, you may have to pay import taxes when the parcel is delivered. These taxes are not included in the price. The power battery connector is slightly damaged -the (-) (negative) plot is missing (this is a repair which is really easy to make or you can just strand the negative wire in the negative plot of the 9v battery). Even without that it is working as is but a connected negative pin reduces background noise.

For sale Hand and homemade BOX 24 to 13-pin converter You plug your old 24-pin guitar and you can play 13-pin GR,VG synth. Works with all original 24-pin cable. -CV-1 Control 13-pin synth Master volume -Mode switch control S1/S2 switch -Volume/tone guitar knobs control Normal signal guitar Roland GR55 and cable not included in auction!!!!!!!!!!!! Thanks

Micro testé et fonctionne bien. Le SM82 est un microphone à condensateur portable, autonome, unidirectionnel, contenant son propre amplificateur de niveau de ligne, son limiteur de crête et sa batterie. Il est conçu pour fournir une sortie de niveau ligne pour une utilisation dans une variété de situations de diffusion où un microphone de niveau ligne avec un limiteur intégré est nécessaire. Caractéristiques du microphone: Réponse en fréquence étendue pour une reproduction sonore exceptionnellement propre et naturelle Directivité cardioïde, uniforme avec la fréquence et symétrique autour de l'axe, pour fournir un rejet maximum et une coloration minimale du son hors axe La sortie de niveau de ligne équilibrée peut directement piloter les lignes téléphoniques ou d'autres entrées de niveau de ligne Le limiteur de crête intégré contrôle le niveau de sortie pour éviter la surcharge de l'amplificateur de ligne du microphone ou de l'équipement externe Condenseur cardioïde avec amplificateur de niveau de ligne et limiteur Réponse en fréquence 40 à 15 000 Hz Diagramme polaire Réponse cardioïde (unidirectionnelle) uniforme avec fréquence, symétrique autour de l'axe Impédance de sortie 250 ohms réelle (conçue pour une utilisation avec des charges de 600 ohms ou plus) Fonctionnement sur batterie 9.8V interne Alimentation fantôme sur une plage de 15V à 50V Passage automatique de l'alimentation fantôme à l'alimentation par batterie Le filtre anti-pop et anti-vent intégré protège du vent et des bruits de souffle explosifs Transducteur à condensateur unidirectionnel Le connecteur / commutateur de sortie active le microphone lorsque le connecteur du câble est inséré Micro tested and works well. The SM82 is a handheld, stand-alone, unidirectional condenser microphone containing its own line level amplifier, peak limiter and battery. It is designed to provide line level output for use in a variety of broadcast situations where a line level microphone with a built-in limiter is required. Microphone Specifications: Extended frequency response for exceptionally clean and natural sound reproduction Cardioid polar pattern, uniform with frequency and symmetrical about the axis, to provide maximum rejection and minimal coloration of off-axis sound Balanced line level output can directly drive line level inputs Built-in peak limiter controls the output level to avoid overloading the microphone line amplifier or external equipment Cardioid condenser with line level amplifier and limiter Frequency response 40 to 15,000 Hz Polar diagram Unidirectional cardioid response uniform with frequency, symmetrical about the axis 250 ohm output impedance (designed for use with loads of 600 ohms or greater) Internal 9.8V battery operation Phantom power in a range of 15V to 50V Automatically switch from phantom power to battery power Built-in pop and wind filter protects against wind and explosive blast sounds Unidirectional capacitor transducer The output connector / switch activates the microphone when the cable connector is inserted

Set of Two Voltage Preamplifiers 2/4/6 I am selling a set of this two units by Physical Acoustics Corporation 2/4/6 voltage preamplifiers, a great solution for a variety of sensors, switch selectable gain, single-ended or differential sensors. New Stored as new, B stock, in very good condition. Description: The 2/4/6 preamplifier has been designed for use with all AE systems available powered via the BNC output signal. It comes with a gain of 20/40/60 dB (switch selectable) and works with a single terminated or differential sensor. Plug-in filters provide the user with flexibility to optimize sensor selectivity and noise rejection. These filters are provided in the low pass (LP), high pass (HP) and band pass (BP) configurations, and offers consistent insertion loss for easy filter exchange without the need for recalibration. Automatic sensor test (AST) is standard. This option provides the sensor with ability to characterize one's own condition and to send a simulated acoustic emission wave that other sensors can Features: -Selectable gain 20/40/60 -Wide dynamic range b'>' 90 dB standard -Low noise b' - Large output signal 20 Vpp in 50? -Single BNC power supply/signal or optional separate power supply/power supply BNC signal - Plug-in filters (uses the same filter as the SPARTAN 2000) - High input impedance - Standard automatic sensor test ï Input protection Electrical specifications: -Selectable gain: 20/40/60 dB + 0.5% dB -Input impedance: 10KO // 15pF -Power requirement: 18-28V DC -Operating current: 30 mA (with AST installed) -28 mA (without AST installed) - Dynamic range: 80 dB (using R15 sensor) 90dB (50O input Environmental specifications: - Temperature: -40 C to +65 C En savoir plus

For sale Hand and homemade BOX 24 to 13-pin converter You plug your old 24-pin guitar and you can play 13-pin GR,VG synth. Works with all original 24-pin cable. -CV-1 Control 13-pin synth Master volume -Mode switch control S1/S2 switch -Volume/tone guitar knobs control Normal signal guitar GS500 24 to 13-pin box possible on asking Roland GR55 and cable not included in auction!!!!!!!!!!!! Thanks En savoir plus

Kaiser 4136 dish warmer / hot plate / 220V WORKS PERFECTLY signs of wear from use and age All-metal housing with a matte black paint finish. Used to bring trays to the desired temperature and hold them at that temperature. It features a stepless automatic thermostat with setting ranging from 0 to 7. The control light will switch on when a setting is chosen and will turn off when the temperature of that setting is reached. It has rubber feet on the bottom for stability. Technical specifications - Dimensions: 30,5 x 43,5 x 6cm - Weight: 3,7kg - ON/OFF switch and control light. - Control range: approx. 20 - 45°C (68 - 113 °F) - Tolerance: approx. ±0.5° En savoir plus Collaboration commerciale.

DJI Ronin-S Focus Motor Used 3 days, All components works perfectly Excellent Condition. Please check my another posts, I offer many accessories for complete the ultimate kit for DJI Ronin-S! (Focus wheel, dual handle, Focus motor, command unit, hot shoe bracket, etc) The DJI Ronin-S Focus Motor works in combination with the Ronin-S focus wheel to control focus, iris, or zoom. In conjunction with the focus wheel, the rotation range is assignable between points A and B, and a function button on the side of the motor lets you switch the status between focus, iris, and zoom. Gear rings are included for lenses without 0.8 MOD gears. In the Box - DJI Ronin-S Focus Motor - 15mm Rod Mount - 15mm Rod - Short 15mm Rod - Set of 4 Screws - 2 x Gear Ring - Power Cable

Röhrenradio Tube amp Telefunken Opus 2550 Hi-Fi FM Stereo Radio à lampes TFK Opus 2550 Made Germany shipping worldwide Telefunken Opus 2550 out of the year 1964/66. It is full stereo and has two power amps, each with 8 watts/PP EL95. It has 14 tubes, It is still in original condition, complete and nobody works on it. When you switch it on, the light works and all tubes heats, see pics. Cap HT multiple changed for a  new old stock Tesla 100/100/200uF. Amplifier good working order on the 2 chanel. Contact for good price international shipping please. Vendu dans son état d'origine hors mis le condensateur multiple HT (100uF + 100uF + (100uF + 100uF)) a été changé pour un n.o.s Tesla 100/100/200uF. Le poste fonctionne sur les deux canaux, La FM capte parfaitement, testé également sur entrées magneto et tourne disque.. Donc vendu en bon état, fonctionnel mais sans garantie avec ses composants d'origine. Intérieur propre. Le pot de la FM glisse bien, Pour les autres ondes il est un peu dur, à nettoyer.. Tous les tubes sont les TFK d'origine parfaitement fonctionnels.. Les pots et clavier ont été nettoyés au KF. Autre photos et video du poste en fonctionnement sur demande. tube amplifier rohre audiovintage siemens klangfilm philips fullrange tube audio pierre clement garrard normend saba green cone kl405 kl 307

USBMidiKliK3x3 / 3 MIDI IN X 3 MIDI OUT   - The KikGenLabs WARNING: THIS AUCTION IS FOR A PCB ONLY. NO COMPONENTS MOUNTED. This PCB is a prototype and is considered as "new" and is fully working. You must buy components yourself. An easy job. No surface components at all. See schematic at the Github project page:  https://github.com/TheKikGen/USBMidiKliK4x4 The USB MidiKlik 4x4 firmware allows the following features : - The board is USB Powered, so no additional power supply necessary. It works driverless as a class compliant device, with Windows XP SP3, Vista 32 and 64 Bit, Windows 7 / 8 / 10   32 and 64 Bit, and Mac OS X, Linux ALSA, Akai MPC Live/X/Force, IOS, Android.  - USB Powered, no additional power necessary - 4 USB IN / OUT - 3 MIDI IN / 3 MIDI OUT JACKS - Configuration with SYSEX and/or user menu from a terminal connected to the USB serial port - Support of very big SYSEX files transmission - Hardware reset remotely by Sysex  - Sysex to switch to configuration menu serial mode - Ability to change the USB device ProductStringName of the device, and also change the USB Vendor and Product Ids.  Changes persist after power off.  - STANDALONE Mode:  can be used as a standalone MIDI routing box without connecting any host - Stackable:  several interfaces can be used, to get 6x6, 9x9 MIDI ports,  without any conflicts as Name, VID & PID can be changed. - Complex routing rules configurables by sysex or from a user menu - Routing rules allow you to transform the USB MIDIKLIK into a MIDI MERGE or a MIDI THRU very easily. - Ability to route any USB IN to any USB OUT/ MIDI OUT (7 targets possible 4 USB, 3 Midi jack per board) - Midi messages filtering: channel voice, system common, realtime, sysex   The firmware is open source so you can adapt or modify it for you own needs. The project is active. BOM: - BLUEPILL STM32F103C8 - 3x  1N4448 D1,D2,D3 - 3x  6N138 DIP-8 U1,U2,U5 - 6x  220 ohms R4,R5,R7,R8,R1,R3 AXIAL-0.3 - 3x  4.7K R6,R2,R9 AXIAL-0.3 - 3x  10 ohms R11,R13,R17 AXIAL-0.3 - 3x   33 ohms R10,R12,R16 AXIAL-0.3 - 6x  DIN_5_FEMALE_SUPPORT

Olympus Pearlcorder S711 Microcassette Recorder Dictaphone Dictation Black WORKS Condition is Used. Tested and fully working. Casing has some light marks. Features & details Comes with x1 Micro Cassette Tape Recorder Dictaphone Style - slim & light Includes Tape & hands free use with built in speaker 2 AA batteries required: not included Up to 2 hours recording on one tape - 1 touch record Slide switch review, rewind & fast forward Product information Manufacturer Olympus PearlCorder Product Dimensions 25.4 x 5.1 x 10.2 cm; 249 g

JVC SEA-RM20  Became To my personnal JAPAN Hifi Collection Remote System Controller / Graphic Equalizer (1986) VERY RARE JVC SEA-RM20 !!! -  EQUALIZER AND REMOTE SYSTEM CONTROLLER, TESTED OK.  État : Occasion  Service de livraison : Colissimo national & international Tested and working "Computerized Remote System Control".  Made in Japan 1980's. Works 100%, no issues.  Includes original remote control. This unit is a type of preamplifier in that you canuse it to control the volume from line input devices like CD players, tuners,tape decks, etc.  It also has a graphic equalizer with 5 memory settings and you can control all the frequencies of the EQ from the remote control whichis something I have not seen before.  You can switch to a real time spectrum analyzer display which will move to the music.   Other features include JVC's SEA "acoustic expander" which does exactly what you'd expect.  The EQ has 5 memory settings and a reverse setting aswell which instantly give you the exact opposite eq curve.   Allbuttons, controls, features, and display are working correctly.  Shows very little wear. All buttons on remote are working correctly- the remote can control other JVC components as well.    On the back are three line inputs- one labelled Audio, one labelled Video 1, and one labelled Video 2/3.  Youcould use these inputs for a tuner, a CD deck, and a tape deck.  There are also two sets of stereo outputs.  In order to use the EQ and graphic display and volume control all at the same time you need to loop the outputlabelled "Line Out" into the "Remote Contro In"-  am including the JVC instruction book and the original remote controller for this purpose. Specifications Output Level: 1V (4.5V max) Gain: ± 0dB Frequency response: 10Hz to 50kHz Signal to Noise Ratio: 100dB Total harmonic distortion: 0.03% Control Range: ± 10dB Frequency Bands: 63, 160, 400, 1K, 2.5K, 6.3K, 16KHz Dimensions: 435 x 77 x 225mm Weight: 2.6kg Finish: black Accessories: RM-S20 remote control Year: 1986

Custom Stratocaster Black Gold Anodized Pickguard With Neck/Bridge Blend Control This is a Custom-Made Stratocaster CBS Replica with more sustain & tone control, made with best quality parts. American Ash fully contoured Stratocaster body finished in Black Lacquer, Brushed Satin Finish to match the Anodized pickguard. D Shaped Maple Neck, Large Headstock (CBS style) Rosewood Fretboad 25.5" Standard Scale Length 21 Vintage Frets 7.25' Radius Ultra smooth Tru Oil Vintage Amber Finish Truss Rod Adjustment At The Heel Bone Nut Kluson Deluxe Vintage Tuners Vintage Style Strap Buttons Vintage Wilkinson Tremolo with Solid Steel Block For Extra Sustain. Matched Gold Anodized Pickguard And Spring Cavity Cover. Deluxe strat wiring harness with Neck/Bridge blend control This wiring harness offers a unique and simple way to achieve multiple Strat pickup configurationsand tones without drilling holes for switches and push pull pots. It uses a custom made CTS Blender Pot that acts as a True Bypass in the circuit when turned completely clockwise. A regular pot wouldn’t work for this application because you would still hear the other pickup bleed through. Here’s how it works:  Dial-in your perfect tone  A Standard 5-Way Strat has 1 volume and 2 tones. The Blender wiring has 1 volume, 1 master tone, and a Blender pot. In the neck position you can blend the bridge pickup in as much as you want. In the bridge position you can blend the neck pickup in as much as you want. In positions 2 and 4 you can have all three pickups on at once. No drilling extra holes for toggle switches or push/pull pots, original Stratocaster Design with more tone option. Handwround Custom Vintage Pickups AWG 42 pickup wire, fiber bobbin flatwork, Alnico polepieces, cloth covered push-back wire, wax potted(paraffin and bee`s wax). These will deliver clean and warm bell tones with vintage vibe and great Blues sound with some drive. Resistance (ohms): Neck - 5.9 K, Middle - 5.8 K RW/RP, Bridge - 6.2 K, DCR +/- 5% Magnets: Vintage Style Hand Staggered Alnico 5 Rods (.671".671".710".710".650".671") CTS Pots Orange Drop Capacitor Genuine Oak Grigsby 5-way Selector Switch 1 Master Volume 250k 1 Master Tone 250k 1 No Load Tone Pot 250k (Blend) All fitted to a genuine Fender control shield (helps reduce hum, and eliminates the need for the 3 point wiring to the back of the pots) Total Weight 4.1kg Free New Gigbag included.