Telestar antenna active

Very good antenna for GPS tracking or monitoring Full sized GPS antenna, much better than small ceramic antennas Excellent VSWR less than 1.5:1 (see picture) Radiation pattern and RHCP were tuned Antenna designed in France.

Miniwhip Active Antenna MC LF VlF Mini Whip Shortwave SDR RX Portable Recei M ZH Description: MINIWHIP VLF LF HF ACTIVE ANTENNA.This is known PA0NHC newest design of MiniWhip Antenna. I have redesigned and built it on SMD components but the circuit diagram itself stayed the same as it had been described on his web page in open source. This sale includes the MiniWhip and Power Splitter assembled and tested boards. They go with its circuit diagrams and part list specification. No cables or connectors are included. This new version of PA0NHC MiniWhip Antenna has these features.New version, using modern BF998 and BCX54 semi conductors.Real class A circuitry, clean reception without IMD.One coax connection.Broadband R/C coupling to the receiver, no transformer For best signal-to-noise ratio:install the Miniwhip onto a well grounded mast.connect "GND" of the Miniwhip PCB to that mast.place HI-Ui ferrite cores (Ui bwtween 5000 and 10.000) on the beginning and end of all cables to block cable noise currents. Specifications: Frequency range: 10 KHz - 30 MHz Power: 12 - 15 volts at 150 mA Second order output intercept point: Greater than + 70 dBm Third order output intercept point: Greater than + 30 dBm Maximum output power: in excess of - 15 dBm PCB Size: Length (mm): As the picture show Connector: BNC Feed line: 50 - 100 ohm coaxial cable up to 100 meter long T o note please: Each antenna performs as good as its installation permits it to. Any active antenna is not working good inside the house! It should be mounted OUTSIDE and as high as possible. Place this MiniWhip antenna PCB inside suitable enclosure of your choise and mount outside the house. Probably for the enclosure you can use a piece of the PVC tube which available in varios diameters in a local store. Do not use metal enclosure! It wont work there! For max. sensitivity: this antenna should be positioned as high and free from meta Package include: 1Set Board Note:   The color might be a little different from the actual product due to color display of different monitors.  Please allow 1-3 cm error. Le 06-févr.-20 à 21:45:18 Paris, le vendeur a ajouté les informations suivantes:

Description: MINIWHIP VLF LF HF ACTIVE ANTENNA.This is known PA0NHC newest design of MiniWhip Antenna. I have redesigned and built it on SMD components but the circuit diagram itself stayed the same as it had been described on his web page in open source. This sale includes the MiniWhip and Power Splitter assembled and tested boards. They go with its circuit diagrams and part list specification. No cables or connectors are included. This new version of PA0NHC MiniWhip Antenna has these features.New version, using modern BF998 and BCX54 semi conductors.Real class A circuitry, clean reception without IMD.One coax connection.Broadband R/C coupling to the receiver, no transformer For best signal-to-noise ratio:install the Miniwhip onto a well grounded mast.connect "GND" of the Miniwhip PCB to that mast.place HI-Ui ferrite cores (Ui bwtween 5000 and 10.000) on the beginning and end of all cables to block cable noise currents. Specifications: Frequency range: 10 KHz - 30 MHz Power: 12 - 15 volts at 150 mA Second order output intercept point: Greater than + 70 dBm Third order output intercept point: Greater than + 30 dBm Maximum output power: in excess of - 15 dBm PCB Size: Length (mm): As the picture show Connector: BNC Feed line: 50 - 100 ohm coaxial cable up to 100 meter long T o note please: Each antenna performs as good as its installation permits it to. Any active antenna is not working good inside the house! It should be mounted OUTSIDE and as high as possible. Place this MiniWhip antenna PCB inside suitable enclosure of your choise and mount outside the house. Probably for the enclosure you can use a piece of the PVC tube which available in varios diameters in a local store. Do not use metal enclosure! It wont work there! For max. sensitivity: this antenna should be positioned as high and free from meta Package include: 1Set Board Note:   The color might be a little different from the actual product due to color display of different monitors.  Please allow 1-3 cm error. Le 11-mars-20 à 13:30:27 Paris, le vendeur a ajouté les informations suivantes:

Description: MINIWHIP VLF LF HF ACTIVE ANTENNA.This is known PA0NHC newest design of MiniWhip Antenna. I have redesigned and built it on SMD components but the circuit diagram itself stayed the same as it had been described on his web page in open source. This sale includes the MiniWhip and Power Splitter assembled and tested boards. They go with its circuit diagrams and part list specification. No cables or connectors are included. This new version of PA0NHC MiniWhip Antenna has these features.New version, using modern BF998 and BCX54 semi conductors.Real class A circuitry, clean reception without IMD.One coax connection.Broadband R/C coupling to the receiver, no transformer For best signal-to-noise ratio:install the Miniwhip onto a well grounded mast.connect "GND" of the Miniwhip PCB to that mast.place HI-Ui ferrite cores (Ui bwtween 5000 and 10.000) on the beginning and end of all cables to block cable noise currents. Specifications: Frequency range: 10 KHz - 30 MHz Power: 12 - 15 volts at 150 mA Second order output intercept point: Greater than + 70 dBm Third order output intercept point: Greater than + 30 dBm Maximum output power: in excess of - 15 dBm PCB Size: Length (mm): As the picture show Connector: BNC Feed line: 50 - 100 ohm coaxial cable up to 100 meter long T o note please: Each antenna performs as good as its installation permits it to. Any active antenna is not working good inside the house! It should be mounted OUTSIDE and as high as possible. Place this MiniWhip antenna PCB inside suitable enclosure of your choise and mount outside the house. Probably for the enclosure you can use a piece of the PVC tube which available in varios diameters in a local store. Do not use metal enclosure! It wont work there! For max. sensitivity: this antenna should be positioned as high and free from meta Package include: 1Set Board Note:   The color might be a little different from the actual product due to color display of different monitors.  Please allow 1-3 cm error. Le 04-avr.-20 à 15:50:26 Paris, le vendeur a ajouté les informations suivantes:

Mini-Whip Mf/Hf/Vhf Sdr Antenna Miniwhip Shortwave Active Antenna For Ore V6N ZH Description: Accessory Type: USB To DC Cable Compatible With: HackRF RTL-SDR Color: green Material: metal + pc Product Description: Effective band: Medium wave shortwave ultrashort wave Applicable environment: indoor outdoor Voltage range: 9V-15V Package Contents: 1set * Antenna Note:  Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. Le 10-févr.-20 à 14:36:08 Paris, le vendeur a ajouté les informations suivantes:

Mini-Whip Mf/Hf/Vhf Sdr Antenna Miniwhip Shortwave Active Antenna For Ore V6N RK Description: Accessory Type: USB To DC Cable Compatible With: HackRF RTL-SDR Color: green Material: metal + pc Product Description: Effective band: Medium wave shortwave ultrashort wave Applicable environment: indoor outdoor Voltage range: 9V-15V Package Contents: 1set * Antenna Note:  Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. Le 24-mars-20 à 10:25:58 Paris, le vendeur a ajouté les informations suivantes:

Mini-Whip Mf/Hf/Vhf Sdr Antenna Miniwhip Shortwave Active Antenna For Ore V6N Description: Accessory Type: USB To DC Cable Compatible With: HackRF RTL-SDR Color: green Material: metal + pc Product Description: Effective band: Medium wave shortwave ultrashort wave Applicable environment: indoor outdoor Voltage range: 9V-15V Package Contents: 1set * Antenna Note:  Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. Le 20-mars-20 à 12:12:38 Paris, le vendeur a ajouté les informations suivantes:

Sony AN-1 active antenna HF SSB 150 kHz to 30 MHz. État : Occasion Antenne de réception en très bon état, complète (support, visserie, accessoires). Rare et très efficace pour la réception des radios internationales. Jamais installée, les visses et supports sont neufs dans l'emballage. Compatible avec les récepteurs Sony ICF-SWxx, Yaesu, Icom, AOR. Antenna in very good condition, complete (support, hardware, accessories). Rare and very efficient for reception of international radios. Never installed, the screws and supports are new in the packaging. Compatible with Sony ICF-SWxx, Yaesu, Icom, AOR receivers. Antenna in ottime condizioni, completa (supporto, avvitamento, accessori). Rara e molto efficace per la ricezione delle radio internazionali. Mai installata, le viti e i supporti sono nuovi nell’imballaggio. Compatibile con i ricevitori Sony ICF-SWxx, Yaesu, Icom, AOR.

Description: Accessory Type: USB To DC Cable Compatible With: HackRF RTL-SDR Color: green Material: metal + pc Product Description: Effective band: Medium wave shortwave ultrashort wave Applicable environment: indoor outdoor Voltage range: 9V-15V Package Contents: 1set * Antenna Note:  Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.   Le 17-janv.-20 à 05:33:26 Paris, le vendeur a ajouté les informations suivantes:

Description: Accessory Type: USB To DC Cable Compatible With: HackRF RTL-SDR Color: green Material: metal + pc Product Description: Effective band: Medium wave shortwave ultrashort wave Applicable environment: indoor outdoor Voltage range: 9V-15V Package Contents: 1set * Antenna Note:  Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. Le 08-janv.-20 à 12:51:15 Paris, le vendeur a ajouté les informations suivantes:

Description: Accessory Type: USB To DC Cable Compatible With: HackRF RTL-SDR Color: green Material: metal + pc Product Description: Effective band: Medium wave shortwave ultrashort wave Applicable environment: indoor outdoor Voltage range: 9V-15V Package Contents: 1set * Antenna Note:  Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.   Le 10-mars-20 à 18:25:45 Paris, le vendeur a ajouté les informations suivantes:

Description: Accessory Type: USB To DC Cable Compatible With: HackRF RTL-SDR Color: green Material: metal + pc Product Description: Effective band: Medium wave shortwave ultrashort wave Applicable environment: indoor outdoor Voltage range: 9V-15V Package Contents: 1set * Antenna Note:  Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. Le 04-avr.-20 à 13:35:10 Paris, le vendeur a ajouté les informations suivantes:

Description: Accessory Type: USB To DC Cable Compatible With: HackRF RTL-SDR Color: green Material: metal + pc Product Description: Effective band: Medium wave shortwave ultrashort wave Applicable environment: indoor outdoor Voltage range: 9V-15V Package Contents: 1set * Antenna Note:  Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. Le 14-avr.-20 à 06:16:08 Paris, le vendeur a ajouté les informations suivantes:

Only includes what you see in the pictures. Powered on and tested before shipping.   Auto-scan searches out active channels • Dual watch allows you to monitor a channel for activity while listening to another • Hi/lo power switch • Built-in speaker and mike • Illuminated LCD channel display • Up/down channel selector • Keyboard lock prevents you from accidentally changing channels • Ceramic filter • Squelch control • Flexible antenna with BNC connector • Automatic noise limiter • External antenna and charger jacks • Low-battery indicator • RF input power: Hi 5 watts Lo 2.5 watts • RF output power: Hi 4 watts Lo 1 Watt • Mike jack • Includes UL-listed 12VDC car cord

ICOM IC-R30 Wide Band FM/AM/SSB/CW Scanner Handheld Receiver. Condition is "New". Shipped with USPS Priority Mail. Icom IC-R30 Digital and Analog Wideband Communications Receiver with Dualwatch and Dual Band Recording Functions Dual Receive Receive on different bands and different modes. For example, monitor HF and UHF simultaneously. Scan for other active channels on the B band, while receiving the main signal on the A band. Dual Band Recording Individually record the audio of the two bands received while in the Dualwatch mode onto a microSD card* in the WAV format. In addition, save frequency, mode, S-meter reading, time, current position data and altitude with received audio. * A microSD/microSDHC card is required Digital Decode Decodes various digital protocol signals, including P25 (Phase 1), NXDN, dPMR, D-STAR, and Japanese domestic DCR (Digital Convenience Radio). Wideband Coverage Covers 0.1 to 3304.999 MHz, and demodulates conventional analog signals such as AM, FM, WFM, USB, LSB and CW as well as digital modes*. A built-in ferrite bar antenna for AM broadcasts and the earphone cable can be used as an external antenna for FM broadcasts. *SSB, CW and digital modes: 0.1 MHz–1.3 GHz. Usable frequencies and modes differ, depending on the selected A or B band. Frequency coverage A Band 0.100000 − 821.999990 851.000000 − 866.999990, 896.000000 − 3304.999990 MHz B Band 108.000000 − 520.000000 MHz