Tilt camera plate fpv

Kit d'accessoires Cuisinières Accessoires électroménager Code EAN: 0644132322229 En-tête / Fabricant: Homyl Type de Produit: Kit d'accessoires Tranche de poids: 100 à 250 g Titre: 2pcs Pan/Tilt Caméra Plate-forme de Mont pour FPV (Servo SG-90+MG-90) En-tête / Compatibilité: Cuisinières

I sell a probably english antique full plat camera with accessories.  This one seems to be rarely used in the past. The condition is extraordinary good. No screw is missing, the wood is not scratched, the leather bellow is lighttight. There was no plate holder first, but there is one now.  That means that the original back is still there and untouched. There is a lense a ross concentric with aperture from 16-32.  But the essential clou that this one offers is the long double extension and the wide adjustabilities. The back offers the typical tilt and swing, but due to the construction the front board offers the same!  After shooting wetplate with it, I change for another format. ------------------------- Je propose un chambre photo probablement anglaise au format "full plate" (16,5 x 21,5 cm environ) complète avec accessoires. La pièce semble peu utilisée, l'état est vraiment très bon. Aucune vis n'est manquante, le bois n'est pas rayé, le soufflet en cuir est étanche à la lumière. i   Au début, il n'y a avait pas de châssis pour plaque de verre. Maintenant il y en a un qui s’adapte parfaitement et que j'ai utilisé.  Je vends avec un objectif: un Ross Concentric 8inch avec une ouverture de 16-32.  Un gros avantage de cette chambre réside dans ses grandes possibilités de réglage. Elle peut être décentrée, inclinée à l'arrière et à l'avant. Je la vends car je change de format.

Sachtler Ace L Tripod Fluid Head Bought in 2018 in Japan as new with Flowtech 75. Use 10 days of shooting. Condition: 9.5/10, very mint condition, Works perfectly like new. You can see small scratch in shown pictures. ACE L Fluid Head - Fiberglass-reinforced composite construction that is both lightweight and strong - A counterbalance system with seven stepped settings for up to 13.2 pounds of counterbalance - The counterbalance system also features a zero setting for no counterbalance - Sachtler's Synchronized Actuated Drag (SA-drag) fluid drag system for both pan and tilt - The SA-drag system provides three drag grades, plus a zero setting for no drag - A panning range of 360°, and tilt range of +90 to - 75° - The ACE L 5.5" long camera balance plate that allows 4.1" of sliding balance adjustment - A 75 mm ball for fast leveling, and an illuminated bubble level built into the head. - One mounting point for the pan bar on the right side of the head HeadCounter Balance RangeRange 0 - 13.2 lb (0 - 6 kg) Steps 7 steps plus 0 settingQuick Release PlateType Sliding Balance Dimensions (L x W) 5.5 x 2" (120 x 50 mm) Sliding Adjustment 4.1" (104 mm)Quick Release SafetyYesCamera Mounting Screw1/4"-20 3/8"Built-in Balance PlateNoTilt DragFour Grades 1,2,3 plus 0 settingTilt Range+90 to -75°Tilt LockYesPan DragFour Grades 1,2,3 plus 0 settingPan Range360°Pan LockYesPan Bar1 x Pan Bar Right side mounted onlyLeveling Bubble/IlluminatedYes Illuminated GeneralLoad Capacity13.2 lb (6 kg) Weight3.7 lb (1.7 kg)

Pro6 HDV Protouch VINTEN (with bag and accesoiries) Really good condition COMPLETE PACK WITH BAG AND ACCESSORIES NOTICE: there is a little failure on top THAT DOESN'T AFFECT USING TRIPOD AND PERFORMANCE. Any returns won't be accepted for this particular reason. I used personally this stuff for years with no problem, the tripod is complete and performing. PRO-6HDV pan and tilt head + Pozi-Loc tripod Features and benefits of PRO-6HDV system The PRO-6HDV system is perfectly suited for event videography, corporate and ENG applications using DV and mini-HDV format cameras. • Maximum payload 6 kg (13.2 lb). • 3 step (plus zero) spring counterbalance system for positive camera control. • Top-loading ‘Side Load’ quick-release slide plate, with 1/4 in. and 3/8 in. camera screws and locating pin, accommodates all cameras. • Illuminated levelling bubble for convenient low-light set up. • Cam-operated tripod clamping system requires low effort with a 90° turn from on to off, providing the user with a positive indication that the tripod is securely locked. • Extensive tripod height range and unrivalled torsional stiffness. technical data: http://e-atc.fr/wp-content/uploads/2017/01/ATC-VINTEN-PRO6-Pieces-part.pdf demo: https://www.youtube.com/watch?v=gtEkRSSI6Fs

SACHTLER 3004 DUTCH HEAD 35 WITH VARIABLE FLUID DAMPING In stock 1 Item Last items in stock Sachtler 3004 Dutch Head 35 with variable fluid damping. The Dutch Head 35 also features Sachtler’s patented fluid damping and counterbalance systems. In addition, it has a cross-sliding plate that uses a high precision dove-tailed guidance with a sliding range of 60 mm / 2.4". This enables the camera’s center of gravity to be aligned exactly over the head’s swiveling axis. The head is able to tilt the horizon, and features a scale on the right side panel that shows the exact degree of third axis movement.