Unbalanced line outputs 2

GOLDMUND CLASSIQUE 2 PREAMP with Goldmund separated power unit or passive for line outputs 2 power amp outputs Excellent Phono MC input with internal switch for different MC cartridges AUX, Tuner, Tape in/out Excellent working order and cosmetics. Definitive sending price will be calculated for buyer.  

The Soundweb London Analog Output BluCard is designed to populate any of the four card slots on Soundweb London BLU-800, BLU-805, BLU-806, BLU-320, BLU-325, BLU-326, BLU-160, BLU-120, BLU-80, BLU-32 and BLU-16 devices. This analog card enables Soundweb London devices to send line level signals. The Analog Output Card has two Combicon connectors which are used as follows: Connector 1 Balanced / Unbalanced Audio, Channel 1 - Mic/Line Balanced / Unbalanced Audio, Channel 2 - Mic/Line Connector 2 Balanced / Unbalanced Audio, Channel 3 - Mic/Line Balanced / Unbalanced Audio, Channel 4 - Mic/Line https://bssaudio.com/en/products/analog-output-card Cette carte provient d’une unité BSS neuve. Carte jamais utilisée. Paiement par par Paypal si envoie, en espèce si retrait sur place. International buyers are always welcome, BUT, PLEASE, ASK FOR A SHIPPING QUOTE BEFORE YOU BID!!!! International shipping costs will be adjusted depending on the destination. From 15€ to 32€ En savoir plus

Beautiful and powerful Sound System Weapon, handmade, 2017, cleaned and overhauled by the constructor himself 4 months ago so the beast is like new, always used with care (its my baby) Configuration: 1 x Phono/line input 2 x Mic/line inputs 2 x Aux sends per input 1 x Aux return (with two inputs) 10 Band graphic equaliser "parametric" filters on mid and bass with gain control. 3 or 4 way active filter 24db/oct with kill switches and led vumeters.   TECHNICAL DATAS:   crossover frequencies are 80/350/4,5k  mics and effect return passing thru active crossover unbalanced in/outs using neutrik sockets. DONT SLEEP!

SYSTEM REQUIREMENTS macOS 10.12, 10.13, 10.14, 10.15 (latest update), Intel Core i5, 4 GB RAM Windows 10 version 1803 or later (64 Bit), Intel Core i5 or equivalent CPU, 4 GB RAM Please note: TRAKTOR AUDIO 2 is not compatible with the iPad Pro. TRAKTOR DJ 2 SYSTEM REQUIREMENTS iOS 11.0 or later, compatible with iPad 5th generation or later, iPad Air 1st generation or later, iPad mini 2nd generation or later SUPPORTED AUDIO FORMATS MP3, WAV, AIFF, Audio-CD, FLAC, Ogg Vorbis, non-DRM AAC SUPPORTED DRIVERS ASIO Core Audio DirectSound WASAPI GENERAL Monitor with 1280 x 800 screen resolution, USB 2.0, 1 GB free disc space. An internet connection and a graphics card which supports OpenGL 2.1 or higher are required to download and activate TRAKTOR software. Once installed and activated, all products can be used offline. POWER SUPPLY Power Supply Via USB 2.0 interface, 5V 500mA bus power from a computer – no external PSU is required. Low-power operation possible from iOS devices. Full operation with iOS devices is achieved with use of an optional power supply (this increases output volumes and also charges the battery of the iOS device). USB SUPPORT Please note: Under Windows, only USB 2.0 ports are officially supported by this product. Compatibility with USB 3.0 ports under Windows 7 or Windows 8 cannot be guaranteed at this time. HARDWARE SPECIFICATIONS Audio Converters (Inputs A/D) Channels (A/D, D/A) 0, 4 Sample Rates 44.1, 48 kHz Bit Resolution 24-bit Line Outputs Maximum Output Level +11.7 dBu Dynamic Range (A weighted) 103 dB THD+N (Max. Level) 0.004 % Frequency Response, +/-1.4 dB 20 Hz - 20 kHz Cross Talk @ 1 kHz to next channel -105 dB Headphone Output Load Impedance 28 Ohms - 600 Ohms Maximum Output Level +5 dBu @ 32 Ohms Dynamic Range (A weighted) 102 dB THD+N (Max. Level, high Imp, 100 Ohms) 0.004 % Frequency Response, +/-1.4 dB 20 Hz - 20 kHz ASIO is a trademark and software of Steinberg Media Technologies GmbH.

Rme Aio. État : Reconditionné par le vendeur HDSPe AIO is the newly developed PCI Express version of the HDSP 9632. A newly developed genuine PCI Express core consequently takes full advantage of the new format, achieving significant performance gains in multitrack audio and lowest latency. Thanks to RME's secure flash update technology, firmware improvements, adjustments, and bugfixes can be installed easily at any time. Features The HDSPe AIO provides unique features: Balanced* stereo analog in- and output, 24-bit/192kHz, > 112 dB SNR Optional analog expansion boards with 4 balanced in- or outputs All analog I/Os capable of 192 kHz, constant number of available channels 1 ADAT digital I/O, supporting 192 kHz via S/MUX4 operation 1 SPDIF digital I/O, 192 kHz-capable 1 AES/EBU digital I/O, 192 kHz-capable 1 Stereo headphone output, separate DA-converter and playback device So up to 18 inputs and 20 outputs can be used simultaneously! 1 MIDI I/O with 16 channels of hi-speed MIDI via breakout cable DIGICheck, RME's unique metering- and analysing tool TotalMix: 760 channel Mixer with 42 bit internal resolution Native PCI Express - no PCI to PCI Express bridge used * The HDSPe AIO ships in a basic version with analog RCA/phono breakout cables (headphone: TRS jack). Therefore all analog I/Os are unbalanced. An analog XLR breakout cable is available as option (headphone: Neutrik TRS locking jack), turning analog into balanced mode. HDSPe AIO includes SteadyClock (TM), RME's own clock technology, combining professional features like maximum jitter suppression at full varipitch capabilities and software controlled sample rates.  Included software: DIGICheck for Windows: Spectral Analyser, professional level meter for 2, 8, or 20 channels, Vector Audio Scope, various other audio analysis tools.   Accessories included Aio 4s & 4I HDSPe AIO: Analog breakout cable, balanced (BO9632XLRMKH) HDSPe AIO: Analog breakout cable, unbalanced (BO9632CMKH) HDSPe AIO: Digital breakout cable, SPDIF (BO9632) HDSPe AIO: Digital breakout cable, AES/EBU & SPDIF (BO968) AKiTiO - Thunder 2 PCIe Box -  cable Thunderbolt 2 Included Make an offer&##128513;

Emotiva Xmc 1 Gen 2 Hdmi 2.0b. État: Occasion Service de livraison: Colissimo Recommandé etat comme neuf pas de rayure complet telecommande notice cable secteur fonctionne eu et uk micro pieds antenne carte 4k hdmi2.0 b installe carte hdmi 1.4 conserve possibilite upgrade xmc dolby atmos dtsx Préampli home-cinéma 7.2 Ecran OLED bleu Menu OSD en couleurs Autocalibration Dirac Live HDMI 2.0 4K 60ips et HDCP 2.2 Mode DAC USB Filtrage de chaque canal indépendant Double sortie caisson stéréo Format audio supportés via HDMI Dolby TrueHD Dolby Digital Plus Dolby Digital 5.1 DTS-HD Master Audio DTS-HD High Resolution Audio DTS 5.1 DTS ES Discrete 6.1 PCM-Multi 5.1 PCM-Multi 7.1 DSD multicanal Modes surround post-processing Dolby Prologic IIx (PLIIx) DTS ES Matrix Reference Stereo Direct Mode Stereo Mode All Stereo Mode Connectique 8x entrées HDMI 2.0 3x entrées audio numériques optiques 3x entrées audio numériques coaxiales RCA 1x entrée audio numérique AES/EBU 2x entrée USB type A (mise à jour firmware) 1x entrée USB type B (mode USB DAC 24/192) 1x Ethernet RJ-45 (connexion avec logiciel Dirac Live 1x jeu de sorties 7.2 RCA 1x jeu de sorties 7.2 XLR 1x sortie ligne stéréo 1x sortie ligne stéréo zone 2 1x sortie casque (ampli TI TPA-6130) 2x sorties HDMI 2.0 CEC et ARC 1x sortie audio numérique optique et 1x coaxiale RCA Généralités Consommation: 35 W (0,5 W en veille) Dimensions (lxhxp): 43 x 38 x 13 cm Poids: 10 kg like new no complete stripe remote control manual power cable works eu and uk micro feet antenna 4k hdmi2.0 b card installs hdmi 1.4 card keeps possibility upgrade xmc dolby atmos dtsx Home cinema preamp 7.2 Blue OLED screen Color OSD menu Dirocal Live Autocalibration HDMI 2.0 4K 60ips and HDCP 2.2 USB DAC mode Filtering of each independent channel Double stereo box output Audio format supported via HDMI Dolby TrueHD Dolby Digital Plus Dolby Digital 5.1 DTS-HD Master Audio DTS-HD High Resolution Audio SDR 5.1 DTS ES Discrete 6.1 PCM-Multi 5.1 PCM-Multi 7.1 Multichannel DSD Post-processing surround modes Dolby Prologic IIx (PLIIx) DTS ES Matrix Reference Stereo Direct Mode Stereo Mode All Stereo Mode Connectivity 8x HDMI 2.0 inputs 3x optical digital audio inputs 3x coaxial RCA digital audio inputs 1x AES / EBU digital audio input 2x USB type A input (firmware update) 1x USB type B input (USB DAC 24/192 mode) 1x Ethernet RJ-45 (connection with Dirac Live software 1x set of 7.2 RCA outputs 1x set of outputs 7.2 XLR 1x stereo line output 1x stereo line output zone 2 1x headphone output (TI TPA-6130 amplifier) 2x HDMI 2.0 CEC and ARC outputs 1x optical digital audio output and 1x RCA coaxial General Consumption: 35 W (0.5 W standby) Dimensions (wxhxd): 43 x 38 x 13 cm Weight: 10 kg

Emotiva Xmc 1 Gen 2 Hdmi 2.0b. État: Occasion Service de livraison: Colissimo Recommandé etat comme neuf pas de rayure complet telecommande notice cable secteur fonctionne eu et uk micro pieds antenne carte 4k hdmi2.0 b installe carte hdmi 1.4 Préampli home-cinéma 7.2 Ecran OLED bleu Menu OSD en couleurs Autocalibration Dirac Live HDMI 2.0 4K 60ips et HDCP 2.2 Mode DAC USB Filtrage de chaque canal indépendant Double sortie caisson stéréo Format audio supportés via HDMI Dolby TrueHD Dolby Digital Plus Dolby Digital 5.1 DTS-HD Master Audio DTS-HD High Resolution Audio DTS 5.1 DTS ES Discrete 6.1 PCM-Multi 5.1 PCM-Multi 7.1 DSD multicanal Modes surround post-processing Dolby Prologic IIx (PLIIx) DTS ES Matrix Reference Stereo Direct Mode Stereo Mode All Stereo Mode Connectique 8x entrées HDMI 2.0 3x entrées audio numériques optiques 3x entrées audio numériques coaxiales RCA 1x entrée audio numérique AES/EBU 2x entrée USB type A (mise à jour firmware) 1x entrée USB type B (mode USB DAC 24/192) 1x Ethernet RJ-45 (connexion avec logiciel Dirac Live 1x jeu de sorties 7.2 RCA 1x jeu de sorties 7.2 XLR 1x sortie ligne stéréo 1x sortie ligne stéréo zone 2 1x sortie casque (ampli TI TPA-6130) 2x sorties HDMI 2.0 CEC et ARC 1x sortie audio numérique optique et 1x coaxiale RCA Généralités Consommation: 35 W (0,5 W en veille) Dimensions (lxhxp): 43 x 38 x 13 cm Poids: 10 kg like new no complete stripe remote control manual power cable works eu and uk micro feet antenna 4k hdmi2.0 b card installs hdmi 1.4 conservated Home cinema preamp 7.2 Blue OLED screen Color OSD menu Dirocal Live Autocalibration HDMI 2.0 4K 60ips and HDCP 2.2 USB DAC mode Filtering of each independent channel Double stereo box output Audio format supported via HDMI Dolby TrueHD Dolby Digital Plus Dolby Digital 5.1 DTS-HD Master Audio DTS-HD High Resolution Audio SDR 5.1 DTS ES Discrete 6.1 PCM-Multi 5.1 PCM-Multi 7.1 Multichannel DSD Post-processing surround modes Dolby Prologic IIx (PLIIx) DTS ES Matrix Reference Stereo Direct Mode Stereo Mode All Stereo Mode Connectivity 8x HDMI 2.0 inputs 3x optical digital audio inputs 3x coaxial RCA digital audio inputs 1x AES / EBU digital audio input 2x USB type A input (firmware update) 1x USB type B input (USB DAC 24/192 mode) 1x Ethernet RJ-45 (connection with Dirac Live software 1x set of 7.2 RCA outputs 1x set of outputs 7.2 XLR 1x stereo line output 1x stereo line output zone 2 1x headphone output (TI TPA-6130 amplifier) 2x HDMI 2.0 CEC and ARC outputs 1x optical digital audio output and 1x RCA coaxial General Consumption: 35 W (0.5 W standby) Dimensions (wxhxd): 43 x 38 x 13 cm Weight: 10 kg

Nagra VII - 2 Channel Universal Digital Audio Recorder with Time Code + Nagra Leather Case Seven TC: Stereo digital recorder, 24/192 with AES 42 and internal 16GB memory delivered with: Battery box and charger, power supply, QCTCU time code cable and instruction manual. In great working and cosmetic condition, like new! Technical specification   RECORDING Internal storage:  Micro SD Flash memory card Removable media:  SD Flash memorycard Disk format:  FAT 16 / 32 Recording Method:   Linear digital PCM, optional:MPEG 1 layer II File type:   16 / 24 bit Broadcast Wave File BWF (WAV) A/D & D/A:  24 Bit Sigma Delta Bit rates:  32 kbits/s up to 384 kbits/sec Tracks: 2 individual Sampling Rate:  44.1, 48, 88.2, 96, 176.4 and 192kHz Recording capacity:   1hr at 24 bit 48 kHz per GB of memory Pre-recording buffer: Programmable Display:  Color LCD touchscreen Level meters:  On colour display   INPUTS Digital input:   XLR 3-pole / AES 42 Analogue inputs:   2 x XLR Microphone (Dynamic, +48V Phantom) / line Mic. input sensitivity: 2.8, 10 and 40 mV/Pa selectable Mic. input noise:  Uin Limiters:   On microphone inputs Line input sensitivity: Adjustable from -6 dBm up to +24 dBm for 0 dBFS recording THD at 1 kHz:  2.8mV Mic Frequency response:  Mic, 10Hz – 75 kHz (+0 – 3dB), Line 10 Hz – 90 kHz (+0 -1dB) (measured on AES out) Signal-to-noise ratio: >110 dB ASA “A” Input level adj. range: 42 dB Mic and from -6 to +24 dB Line Input filters: LFA Internal microphone: On the front panel Crosstalk: Mic >70dB: Line > 110dB   OUTPUTS Analogue line output: XLR 4.4V max (+15 dBm) Crosstalk:  >110 dB Signal-to-noise ratio: >100 dB Digital output: XLR AES-3 (24 bit or 16 bit) THD+N:   Frequency response:  10 Hz – 75 kHz (+0-3dB) Headphones:  Stereo 6.3mm (¼”) Jack 50 Ω Internal speaker:  0.3W   OTHER USB: Micro AB connector M/S Decoder:  Switchable Ethernet:  RJ 45   GENERAL Dimensions:    165 x 175 x 65mm (W x H x D) (Incl. battery box) Weight:   800g (1.75 lbs) (Incl. battery pack) Power supply: External 15V Power Consumption:  Approximately 5W Charge time: Approximately 3 hours Battery life: >5 hours Relative humidity:  From 10% to 99% (non condensing)

Je vends ce préampli convertisseur Vintage studer. Excellent état. Sort de révision, lampes neuves appairées et réglées a la perfection. Un son incomparable. The  MicVALVE  is a two-channel preamplifier for microphone and line level signals with analog and digital outputs. The main signal path is designed in semiconductor technology and allows top quality “direct-to-digital” recordings. A Valve Dignifier stage equipped with  2 × ECC 81  valves per channel can be switched into the signal path, providing a number of front panel controls for individual valve sound treatment. -         Maintained by professional technician in France with invoice  -         new valves -         Smoke free environment.

Grande sensibilité (gros pixels monochromes) et capteur de taille moyenne pour pas cher ! Je vends une camera Astro ZWO ASI130MM (Capteur 1,3 Mp 1280x1024 - 1/2 pouce diagonal, taille de pixel 5,2 microns). Très bon état. Pas de traces d'usure apparentes. Peu utilisé. Complet avec boîte d'origine, câbles USB et ST4 + adaptateur pour connexion 1,25 pouces. Descriptif: https://astronomy-imaging-camera.com/portfolio/asi130mm Specs du capteur: 1/2-Inch Megapixel CMOS Digital Image Sensor MT9M001C12STM (Monochrome) Datasheet, Rev. M For the latest datasheet, please visit www.onsemi.com Features • Array Format (5:4): 1,280H x 1,024V (1,310,720 active  pixels). Total (incl. dark pixels): 1,312H x 1,048V  (1,374,976 pixels)  • Frame Rate: 30 fps progressive scan; programmable • Shutter: Electronic Rolling Shutter (ERS) • Window Size: SXGA; programmable to any smaller  format (VGA, QVGA, CIF, QCIF, etc.) • Programmable Controls: Gain, frame rate, frame size Applications • Digital still cameras • Digital video cameras • PC cameras General Description The ON Semiconductor MT9M001 is an SXGA-format  with a 1/2-inch CMOS active-pixel digital image sen- sor. The active imaging pixel array of 1,280H x 1,024V. It  incorporates sophisticated camera functions on-chip  such as windowing, column and row skip mode, and  snapshot mode. It is programmable through a simple  two-wire serial interface.  This megapixel CMOS image sensor features ON Semi- conductor’s breakthrough low-noise CMOS imaging  technology that achieves CCD image quality (based on  signal-to-noise ratio and low-light sensitivity) while  maintaining the inherent size, cost, and integration  advantages of CMOS. Table 1: Key Performance Parameters The sensor can be operated in its default mode or pro- grammed by the user for frame size, exposure, gain set- ting, and other parameters. The default mode outputs  an SXGA-size image at 30 frames per second (fps). An  on-chip analog-to-digital converter (ADC) provides 10  bits per pixel. FRAME_VALID and LINE_VALID signals  are output on dedicated pins, along with a pixel clock  that is synchronous with valid data. Parameter Value Optical format 1/2-inch (5:4) Active imager size 6.66 mm (H) x 5.32 mm (V) Active pixels 1,280 H x 1,024 V Pixel size 5.2 m x 5.2 m Shutter type Electronic rolling shutter (ERS) Maximum data rate/ master clock 48 MPS/48 MHz Frame rate SXGA (1280 x 1024) 30 fps progressive scan; programmable ADC resolution 10-bit, on-chip Responsivity 2.1 V/lux-sec Dynamic range 68.2 dB SNRMAX 45 dB Supply voltage 3.0 V3.6 V, 3.3 V nominal Power consumption 363 mW at 3.3 V (operating); 294 W (standby) Operating temperature 0°C to +70°C  Packaging 48-pin CLCC

La mixette portable AETA MIXY a été achetée d'occasion en 2015 directement chez AETA. Depuis son acquisition, elle n’a jamais été utilisée à l’extérieur. À noter: la batterie est à remplacer. Le coût de la batterie neuve, confirmé avec AETA, est de 162 € port compris, (offre à l’appui). Il est également possible de l’utiliser avec une batterie externe via un adaptateur pour batterie NP1. -------------------------- The AETA MIXY portable mixer was purchased second-hand in 2015 directly from AETA. Since its purchase, it has never been used outdoors. Please note: the battery must be replaced. The cost of the new battery, confirmed with AETA, is €162 including delivery, (supporting offer). It is also possible to use it with an external battery via an NP1 battery adapter. ------------------ AETA MIXY - Mixette portable stéréo Caractéristiques principales Traitement - Programmation via menu: - Gain: de 0 à 50 dB - Atténuation: -40 dB - Coupe-bas: - 50/120 Hz, -18 dB/octave - 300 Hz, -6 dB/octave - Inverseur de phase, pan-pot ± 5 dB - Indicateur de crête sur les entrées - Couplage des voies 1 b'&' 2 possible - Limiteurs post-fader - Micro d’annonce intégré - Vu-mètre / Peak-mètre LCD Entrées - Entrées Micro/Ligne: 3 entrées XLR3F (48 V.PH / 12 V.PH / 12 V.T) ou MiniCom 12 pts (pour les voies 2 et 3) - Entrées Ligne Symétriques: 2 entrées b'"'Tape Returnb'"' (XLR5F), niveau ajustable - Entrée Numérique: 1 entrée AES/SPDIF, 44.1 ou 48 kHz, 16 bits (RCA) Sorties - Sorties Ligne Symétriques: 2 sorties ligne/micro (XLR5M): - Ligne: +4 dBu, -10 dBV - Micro: -46 dBu - Sorties Ligne Asymétriques: 2 sorties ligne/micro (mini jack stéréo 3.5 mm): - Ligne: -2 dBu - Micro: -52 dBm - 3 sorties Direct Out pré-fader (Hirose HR10 F 6 pts) - 2 sorties ligne symétriques (MiniCom 12 pts) - Sortie Numérique: 1 sortie paire AES/SPDIF (HR10 M 6 pts), 44.1 ou 48 kHz, 16 bits - Sortie Casque: Mini jack stéréo 3.5 mm Synchro b'&' Code Temporel Non spécifié Alimentation et Mensurations - Alimentation: Batterie interne, autonomie environ 8 heures; alimentation externe de 8 à 18 V DC (connecteur HR10 F 4 pts) - Consommation: b' - Dimensions: 17,1 cm x 13,1 cm x 4,9 cm - Poids: 1,23 kg ---------- AETA MIXY - Portable Stereo Mixer Main Features Processing - Menu-based programming: - Gain: 0 to 50 dB - Attenuation: -40 dB - Low-cut filter: - 50/120 Hz, -18 dB/octave - 300 Hz, -6 dB/octave - Phase inverter, pan-pot ± 5 dB - Peak indicator on inputs - Channels 1 b'&' 2 can be linked - Post-fader limiters - Built-in announcement microphone - LCD VU meter / Peak meter Inputs - Mic/Line Inputs: 3 XLR3F inputs (48V.PH / 12V.PH / 12V.T) or MiniCom 12-pin (for channels 2 and 3) - Balanced Line Inputs: 2 b'"'Tape Returnb'"' inputs (XLR5F), adjustable level - Digital Input: 1 AES/SPDIF input, 44.1 or 48 kHz, 16-bit (RCA) Outputs - Balanced Line Outputs: 2 line/micro outputs (XLR5M): - Line: +4 dBu, -10 dBV - Mic: -46 dBu - Unbalanced Line Outputs: 2 line/micro outputs (3.5 mm stereo mini-jack): - Line: -2 dBu - Mic: -52 dBm - 3 pre-fader Direct Out outputs (Hirose HR10 F 6-pin) - 2 balanced line outputs (MiniCom 12-pin) - Digital Output: 1 AES/SPDIF pair output (HR10 M 6-pin), 44.1 or 48 kHz, 16-bit - Headphone Output: 3.5 mm stereo mini-jack Sync b'&' Time Code Not specified Power b'&' Dimensions - Power: Internal battery, approx. 8 hours of autonomy; external power supply from 8 to 18 V DC (HR10 F 4-pin connector) - Consumption: b' - Dimensions: 17.1 cm x 13.1 cm x 4.9 cm - Weight: 1.23 kg En savoir plus Collaboration commerciale.

Description: The Myryad MA-120 power amplifier has been designed to offer a combination of high quality sound reproduction and simple yet elegant styling. The build and finish have a no-nonsense, quality feel: simple brushed aluminum face with an understated logo; gold connections at the rear. It can be used to provide power for high quality stereo systems when partnered by a suitable preamplifier or a Myryad integrated amplifier in bi-amp or tri-amp systems. It can also be used in combination to power a full-surround music or Home Cinema sound system of the highest quality. The Myryad MA-120 has unbalanced line inputs plus directly linked line outputs, all on RCA phono sockets. It may be controlled remotely via the My-Link communications bus when used with other Myryad M series products. My-Link allows remote control of standby and mute functions. The Myryad MA120 has a smooth range, is airy and transparent, but lacks the body of a more powerful amplifier. Bass is detailed and firm with good resolution. It is easy to hear differences with different bass sounds even if they are of really low frequency (below 50dB). Midrange is airy and excellent with placement of sounds in the stereo perspective. It possesses sparkling and airy treble with no sign of harshness or metallic sound. Perhaps the best that can be said of it is that it does not assert its own personality above the music. A complaint may be that the sound is a little on the bright side. The Myryad MA-120 excels in keeping each sound unaffected by other sound resolutions without losing the overall musical sense. Specifications: Stereo Mode, all channels driven Continuous Power Output.................60W @ 8 ohms At                                      .................85W @ 4 ohms At IHF Dynamic Power.........................80W @ 8 ohms                             .........................120W @ 4 ohms                             .........................160W @ 2 ohms Input Sensitivity...............................775mW for rated power Voltage Gain...................................29dB Input Impedance..............................Unbalanced: 100k ohms / 450pF                         ..............................Balanced: N/A Frequency Response.......................+/- 0.2dB, 20Hz to 20kHz Signal-to-Noise Ratio.......................111dB, A weighted, ref rated power General Voltage...........................................120V or 230V, set by internal wiring Dimensions(w x d x h)......................43.5 x 30 x 9.5cm Weight............................................8kg

Mixeur en rack 19’ MPA Expansion ML620e 6-CH MICROPHONE / LINE MIXER Il s'agit d'une table de mixage pour microphone, c'est pour 12V. La ligne dédiée est perdue, elle est de 500mA pour 12v Gain 1 kz, ±3 dB Frequency Response (ref 1 kz) 20 Hz to 20 kHz, ±2 dB Input Impedance Balanced Lo Mic 2 kΩ / Unbalanced Line 20 kΩ / Aux 47 kΩ Output Impedance Balanced Lo Mic 150 Ω / Aux 2 kΩ Input Clipping Levels (Min.) Balanced Lo Impedance Mic -22 dBV Balanced Impedance Line -3dBV Aux -1 dBV Output Clipping Levels (Min.) Balanced Lo Impedance Mic -20 dBV Aux +9 dBV Distortion Outputs (1 kHz) Balanced Lo Impedance Mic Less than 1%, -34 dBV Aux +6 dBV Phantom Power Voltage 12V or 48V selectable Input Power DC 12V~14V, 300~500mA (Adaptor Included) Dimension (WxHxD) 483 x 44.5 x 130(mm) Weight 1,500g   Le tout en bonne état et fonctionne très bien…Envoi possible Colissimo, Annonce sérieuse donc acheteurs fantômes, à l'étranger ou à contacter que par Gmail !! Passez votre chemin

Yamaha MA2030 Lo-Z / Salut-Z commutable compact de classe D amplificateur mélangeur (Lo-Z: 30W x2ch, Salut-Z: 60W x1ch) équipé de 3 entrées stéréo, 2 entrées micro et fonctions DSP puissants pour la musique de haute qualité de lecture et l'utilisation du microphone.   Facile à installer, et une interface conviviale pour un fonctionnement sans effort Flexible 3 entrées stéréo et deux entrées de microphone Fonctions avancée DSP pour la lecture de musique et de l'utilisation du microphone Commutable pour Lo-Z (3O / 4O) ou Salut-Z (70V / 100V) Les systèmes de haut-parleurs Stereo EQ source avec la fonction d'amélioration Built-in EQ pour des performances de haut-parleur / série Yamaha VXS VXC optimale zones de service peuvent être étendues par l'ajout d'un PA2030 Télécommande de volume et un microphone commutation on / off via le panneau de contrôle DCP1V4S option Contrôle de la qualité Yamaha garantit un fonctionnement sûr et fiable Gain d'espace 1U taille demi-ra ck The MA2030 is a power amplifier that is ideal for daily use with a simple user interface and a power-saving ClassD circuit in a compact body. One unit supports both low impedance and high impedance, enabling flexible system construction. In addition to the mixing function, the MA2030 provides high-quality sound with an EQ equipped with a microphone and DSP function that is ideal for music playback, and an enhancer function. ■ Type: Power amplifier, high /low-impedance compatible ■ Rated output: 30Wx2 (3Ω, 4Ω, 8Ω), 60Wx1 (70V /100V) ■ Power consumption: 30W 1/8 output, 3Ω, AC 100V, when driving all channels (pink noise) ■ Dimensions: 215 x 54 x 288 mm ■ Weight: 1.8kg ■ Others: ■ Amplifier circuit: Class D ■ Frequency characteristics 0dB, ​​-2.5dB, + 1.0dB: Stereo input (line input) to line output 20Hz to 20kHz 0dB, ​​-3.0dB, +1.0 dB: Stereo input (line input) to speaker output 50Hz to 20kHz, 1W, 3Ω /4Ω /8Ω 0dB, ​​-3.0dB, + 1.0dB: Stereo input (line input) to speaker output 90Hz to 20kHz, 1W, 70V /100V ■ Connector Microphone input MIC IN 1: XLR combo jack, balanced MIC IN 2: 3.5mm Euro block terminal 3-pin, balanced Line input ST IN 1: Stereo mini phone jack (3.5mm), unbalanced ST IN 2 /ST IN 3: Stereo RCA terminal, unbalanced Speaker output Barrier strip terminals x 2 pairs Line output Stereo RCA terminal, unbalanced ■ Protection circuit Load protection: Power switch ON /OFF: Output mute *, Output overvoltage: Output limit *, DC detection: Shutdown (* with automatic reset function) Amplifier protection: overheating: output limit * → output mute * → shutdown, overcurrent: output mute *, integrated power: output limit * (* with automatic reset function) Power protection: overheating: shutdown, overvoltage: shutdown, overcurrent: shutdown ■ Cooling method: Natural air cooling ■ Power supply voltage: AC 100V; 50Hz /60Hz ■ Operating temperature: 0 ° C ~ + 40 ° C ■ Storage temperature: -20 ° C ~ + 60 ° C Accessories: Power cable, 3.5mm Euroblock plug (3-pin) x 1, Instruction manual, Spec sheet (English) ■ Options sold separately: RKH1 (rack mounting bracket), DCP1V4S-US (digital control panel)

Amplifier Av Surround Receiver 7.1 MARANTZ ZR6001 (very good condition). Très rare ampli home cinéma haut de gamme Très bon état de fonctionnement ! Très bon état esthétique ! Télécommande fournie ! 14kg de technologie ! Produit très haut de gamme ! Etage de puissance et pré-amplification Puissance de sortie: 7 x 95 W RMS Impédance nominale: 8 ohms Décodeurs intégrés Dolby Digital EX, DTS ES (Matrix et Discrete), DTS Neo:6 (Cinema et Music), DTS 96/24, DPLI, DPL II (Game Movie et Music), DPLIIx, HDCD Autres effets Surround CS 6.1 (CS II Cinema, Music Mono), stéréo multicanale, Movie, Hall, Matrix, Stadium, Virtual Conversion Numérique / Analogique (N/A) et A/N Crystal: 24 Bits 192 kHz via CS42428 Traitement numérique (DSP) et type: 32 Bits via CS49400 Réponse en fréquence numérique (96kHz PCM): 8 Hz - 100 kHz (large bande) Réponse en fréquence analogique (/- 3dB): 8 Hz - 100 kHz (large bande) Rapport signal bruit: 105 dB Distorsion Harmonique Totale: 0,08% Connectique Entrées / Sorties Audio / Vidéo Entrées audio analogiques: 7 (TV, VCR1, VCR2, CD, CD-R/MD, cassette, Aux.) Entrées audio numériques: 4 (2 optiques 2 coaxiales) Entrées audio vidéo: 4 (toutes doublées S-Vidéo) Entrées composantes: 2 x YUV Entrées en façade: 1 x A/V doublée S-Vidéo Entrées analogiques: 1 x 7.1 canaux Entrée D-Bus multiroom, multi RC (flasher) Sorties audio analogiques: 4 (VCR1/ VCR2 CD-R/MD, cassette) 1 sortie auxiliaire PLC Sorties audio numériques: 2 (1 optique 1 coaxiale) Sorties audio vidéo: 2 (toutes doublées S-vidéo) Sorties Moniteur: 3 (1 x CVBS 1 x S-vidéo 1 x Y, Cb/Pb, Cr/Pr) Sorties Pré-out 7.1 Sorties D-Bus multi. alimentation commutée, multroom radio commandé Sorties Ir emitters x4 Bornes HP / possibilité fiches banane: 7 paires à vis section standard RS232C bi-directionnelle, mémoire ligne interne Fonctions de confort Télécommande RC 5500 SR (préprogrammée) Tuner RDS AM / FM (PS, PTY, RT): 50 Présélections Menu d'installation: OSD avec réglage retard enceintes UpConversion vidéo CVBS composite vers S-Vidéo et YUV composantes Composants audiophiles haute qualité Fonction Lip Sync Réglage de la synchronisation du retard acoustique avec circuits vidéo internes (200 msec/ch.) Fréquence de coupure basse réglable: 40 Hz, 60, 80, 100, 120 Hz Technologie CPL (Control Power Line) Dimensions (L x H x P): 440 x 162 x 463 mm - Poids 14 kg. Very rare high-end home cinema amplifier Very good working condition! Very good aesthetic condition! Remote control included! 14kg of technology! Power stage and pre-amplification Output power: 7 x 95 W RMS Nominal Impedance: 8 ohms Integrated decoders Dolby Digital EX, DTS ES (Matrix and Discrete), DTS Neo: 6 (Cinema and Music), DTS 96/24, DPLI, DPL II (Game Movie and Music), DPLIIx, HDCD Other surround effects CS 6.1 (CS II Cinema, Music Mono), multichannel stereo, Movie, Hall, Matrix, Stadium, Virtual Digital / Analogue (D / A) and A / D Crystal Conversion: 24 Bits 192 kHz via CS42428 Digital processing (DSP) and type: 32 Bits via CS49400 Digital frequency response (96kHz PCM): 8Hz - 100kHz (wideband) Analog frequency response (/ - 3dB): 8 Hz - 100 kHz (wideband) Signal-to-noise ratio: 105 dB Total Harmonic Distortion: 0.08% Connectivity Audio / Video Inputs / Outputs Analog audio inputs: 7 (TV, VCR1, VCR2, CD, CD-R / MD, cassette, Aux.) Digital audio inputs: 4 (2 optical 2 coaxial) Audio video inputs: 4 (all dubbed S-Video) Component inputs: 2 x YUV Front inputs: 1 x A / V doubled S-Video Analog inputs: 1 x 7.1 channels Multiroom D-Bus input, multi RC (flasher) Analog audio outputs: 4 (VCR1 / VCR2 CD-R / MD, cassette) 1 PLC auxiliary output Digital audio outputs: 2 (1 optical 1 coaxial) Audio video outputs: 2 (all S-video dubbed) Monitor outputs: 3 (1 x CVBS 1 x S-video 1 x Y, Cb / Pb, Cr / Pr) Pre-out 7.1 Multi D-Bus outputs. switched power, radio controlled multroom Ir emitters outputs x4 Loudspeaker terminals / possibility of banana plugs: 7 pairs of screws, standard section Bi-directional RS232C, internal line memory Comfort functions RC 5500 SR remote control (pre-programmed) RDS AM / FM tuner (PS, PTY, RT): 50 Presets Setup menu: OSD with speaker delay adjustment UpConversion of composite CVBS video to S-Video and component YUV High quality audiophile components Lip Sync function Adjustment of the synchronization of the acoustic delay with internal video circuits (200 msec / ch.) Adjustable low cutoff frequency: 40 Hz, 60, 80, 100, 120 Hz Powerline technology (Control Power Line) Dimensions (W x H x D): 440 x 162 x 463 mm - Weight 14 kg