Vac 110 265vtaille

Replace the old Heathkit SB-1000 ON/OFF relay with a new and more powerful one. The K2-110 is a replacement ON/OFF relay for the HEATHKIT SB-1000. It is a 4PDT relay associated in 2 x 2 contacts for 110/120 VAC mains, (110/120VAC coil), see pics. Specially designed, oversized, it replaces advantageously the original relay. It can switch 20 amps per leg at 110/120 VAC. fully compatible, integrated in a transparent box, you can easily set it with double-sided sticky inside the amp. just install, and solder in-out wires, detailed schematic, provided by download in PDF format. Size: 4.1cm x 2.7cm x 3.5cm, (add 0.8 cm legs), 65g. I ACCEPT PAYPAL ONLY !! Free shipping!! Shipping carefully packed via  Economic international bubble envelope I normally ship on the fifth business day after receiving payment. I ship worldwide E-MAIL If you have any question, don't hesitate to ask me. THANKS for your interest on this item! Note: After a bad experience, I like to remind you as: I sent no later than 5 working days after payment. *** France is not the next door *** Transit time can be up to 4 weeks, (!! Be patient !!). I do the maximum in terms of product quality, shipping, and packaging, for everyone to be happy. ***I aspire to have 100% positive feedback*** So I would advise to " impatient people " do not buy if you do not agree with these simple principles, !!! Remember purchase is not compulsory !!! Thank you *** to take into account these observations **** And most importantly, thank you very much for almost 3300 buyers were satisfied. Please note: Due to current pandemic, I can only post items on Friday

a "SURPLUS NEW IN BOX" Motorola SLR 5500 Digital Repeater UHF 400-470 MHZ MDR10QCGANQ1AN. For your business to be successful, you need dependable voice and data communications that reach every corner of your operations. The MOTOTRBO SLR 5500 Repeater delivers high performance, high reliability two-way radio service with all the features you need to connect your workplace whether you're in the field or on the factory floor. With its sleek form factor and low power consumption, the MOTOTRBO SLR 5500 is engineered for low cost of ownership. And with a huge leap forward in technology, it represents the next generation in repeaters as the cornerstone of a MOTOTRBO professional two-way radio system.  Whether you need the simplicity of a single site conventional system, or the powerful trunking capabilities of Capacity Plus, Linked Capacity Plus or Connect Plus, the SLR 5500 delivers the power of digital two-way radio to your workforce.  Frequency Ranges:   UHF (400–470 MHz) GENERAL SPECIFICATIONS Frequency Range 400-470 MHz  Channel Capacity 64 RF Output Power 1-50 W Dimensions (H x W x D) 44 x 483 x 370 mm Weight 8.6 kg Input Voltage (AC) 100-240 Vac, 47-63 Hz Current (standby), 110 / 240 V 0.18 / 0.25 A Current (transmitting), 110 / 240 V 1.5 / 0.9 A Input Voltage (DC) 11.0-14.4 Vdc Current (standby) 0.7 A Current (transmitting) 9.5 A Operating Temperature Range -30 to +60 °C Humidity RH of 95%, non-condensing at 50 °C Max Duty Cycle 100% FCC Description ABZ99FT3094 ABZ99FT4096 - IC Description 109AB-99FT3094 109AB-99FT4096 - Digital Vocoder Type AMBE+2™ Battery Charger Capacity 12 V, 3 A Connectivity Tx (N female), Rx (BNC female), USB A receptacle, 2x Ethernet Supported System Types Digital Conventional, IP Site Connect, Capacity Plus (Single Site and Multi-Site), Capacity Max, Analogue Conventional, MPT 1327 RECEIVER Frequency Range 400-470 MHz  Channel Spacing 12.5 / 20 / 25 kHz Frequency Stability 0.5 ppm Sensitivity, 12dB SINAD 0.22 uV Sensitivity, 5% BER 0.22 uV Selectivity (TIA603D), 12.5/20/25 kHz 55 / 83 / 83 dB 55 / 80 / 80 dB 55 / 80 / 80 dB Selectivity (TIA603), 12.5/20/25 kHz 68 / 83 / 83 dB 68 / 80 / 80 dB 68 / 80 / 80 dB Selectivity (ETSI), 12.5/20/25 kHz 63 / 70 / 70 dB Intermodulation Rejection (TIA603D/ETSI) 82 / 73 dB Spurious Rejection (TIA603D/ETSI) 95 / 90 dB Audio Distortion Transmitter Hum and Noise, 12.5/20/25 kHz -45 / -45 / -50 dB TRANSMITTER Frequency Range  400-470 MHz  RF Output Power 1-50 W Max Duty Cycle 100% Channel Spacing 12.5 / 20 / 25 kHz Frequency Stability +/- 0.5 ppm Intermodulation Attenuation 40 dB Adjacent Channel Power (TIA603D), 12.5/20/25 kHz 62 / 78 / 78 dB Adjacent Channel Power (ETSI), 12.5/20/25 kHz 62 / 78 / 78 dB Conducted Spurious Emissions -36 dBm 1 GHz Modulation Fidelity (4FSK) FSK Error 5%, FSK Magnitude 1% Audio Response TIA603D Audio Distortion Receiver Hum and Noise, 12.5/20/25 kHz -45 / -45 / -50 dB Rated System Deviation, 12.5/20/25 kHz ±2.5 / ±4.0 / ±5.0 kHz

Alimentation régulée Kenwood PS-33 d'occasion Tension sortie: 13.8 VDC Puissance sortie: 15A (20.5A en pointe) Tension entrée: 110/220-240 VAC 50/60 Hz Protection contre surtension Connecteurs de sortie à l'arrière par borniers Bouton marche/arrêt et LED rouge en face avant Dimensions: 173 x 96 x 296 mm Poids: 7 Kg

Yaesu HF Transceiver all modes SSB/CW/AM/FM, keyer electronic, Memory board inclued, 28Mhz= 11m crystals, Working perfect !! Original Mic (handle) Tuning steps: Continuous Mode: AM/FM/SSB/CW/FSK Channels/memory management: 1 RX and 1 TX Repeater shift/offset: No dedicated. Use VFO A/B split (with FV-901) or memory split Power supply: 13.8 VDC or mains: 100 / 110 / 117 / 200 / 220 / 234 VAC Current drain/power consumption: RX: 1.1 A (heater off) @ 13.5 VDC TX: Max 21 A @ 13.5 VDC Antenna impedance/connector: 50-75 ohms / SO-239 Dimensions (W*H*D): 342*154*324 mm (13.46*6.06*12.76") Weight: 18 Kg (39.7 lbs)

Alimentation / Power Supply: QJE QJ1922SW Tension d'entrée: 230 VAC 50/60 Hz - Tension de sortie: 13.8 VCC max. - Courant de sortie: 5 A / 7A max - Dimensions: 185 × 110 × 80 mm Poids: 1.0 kg Fusible: T 2A