Vest with increased capacity

Enterprise Grade Capacity: 600GB Speed: 15,000RPM Interface Types: SAS Serial Attached SCSI Form Factor: 3.5inx1.0in LFF Hard Drive Sector Size: 512 / 512e Sustained Throughput: 122 to 204 Average Seek Time: 3.4 / 3.9 Electrical Interface: SAS-2 Serial Attached SCSI v2 - 6.0Gbps On-Board Cache: 16MB Compatible Systems: Dell 10th Gen. 2950 / 6950 Dell Enterprise Plus EqualLogic 02R3X 0VX8J ST3600057SS 600GB 6Gbps 15K 3.5in LFF SAS Hard Drive - Refurbished OEM Alt MPN: 9FN066-058 Dell Enterprise Plus PNs: 0VX8J, 00VX8J Alt DPNs: 002R3X, 02R3X Cheetah® 15K.7 Highest capacity, performance and reliability in 3.5-inch mission-critical storage Key Advantages     Third-generation perpendicular recording delivers up to 600GB     Unprecedented performance with sustained data rate of up to 204MB/s—a 16 percent increase over last generation     Industry’s highest 3.5-inch drive reliability at 1.6-million-hours MTBF     Seagate PowerTrim™ technology provides a 62 percent improvement in GBs/W at idle over typical 3.5-inch hard drives     Read/write advances deliver nonrecoverable error rate of 1x10E16     Available in 4Gb/s FC or 6Gb/s SAS interfaces (supports SAS 2.0 feature set) Lowest Cost of Ownership     Seventh-generation Seagate® Cheetah 15K.7 drive is the fastest, highest capacity and most reliable ever     Lower watts/GB ratio helps achieve reduced power and cooling costs while optimizing capacity requirements     Higher performance with fewer drives—reducing support infrastructure, physical space requirements and storage management costs     The highest reliability of any 3.5-inch drive, with increased system reliability due to the need for fewer drives Highest Reliability     Seagate continues to focus on reliability and data protection. MTBF is an industry-leading 1.6 million hours     Seagate-exclusive enhanced Error Correction Code better maintains performance throughout the life of the drive and reduces the probability of lost data     The third generation of Seagate-exclusive Background Media Scan proactively scans the media for potential defects during drive idle time. It enables incipient errors to be corrected before data is lost     Quick and Robust Download feature loads new firmware in seconds, with built-in protection to ensure no corruption in the event of a power failure during firmware switch Compatibility: This drive is compatible with any server that accepts 3.5"x1" (Large Form Factor) SAS drives.

Brocade BR-5120-0008 5100 8/40 port 8GB FC SAN Switch 24 Active Ports w/ 8Gb SFP 80-1001589-11  - STOCK FR - EXPÉDITION 24H 254.4 € Type de produit - Switch État - Fonctionnel Numéro de produit (PN) - 80-1001589-11 Modèle du produit - Brocade BR-5120-0008 5100 Format - Rackable Garantie - 6 mois Contenu additionnel - Sans alimentation PN équivalent - NA-5120-0008 Nombre de ports - 40 Ports Norme(s) réseau - 10/100/1000 Mbps POE - Non Features and Benefits: Alteon NG enables application delivery networking by providing safe and efficient distribution of business-critical applications across your company's network. Alteon NG is well suited for environments with growing SSL offloading needs. Service Availability Separate vADC per Application/Service - Complete isolation between virtual ADC (vADC) instances at the network, fault and configuration levels - Full resource reservation - Next-generation services can be enabled without impacting the performance of other service applications Smart Health Monitoring and Failure Detection - Quickly identifies failures at any point along the application or transaction path and reacts proactively - Hundreds of pre-defined health checks are instantly accessible (after installation), ensuring quick server/application availability and lowering total cost of ownership Stateful Persistency - Prevents application session disruptions - Ensures transaction completion Device Redundancy: Active-Active, Active-Backup or Active-Standby - Prevents the introduction of a single point of failure - Seamless device redundancy with VRRP support - Protects hardware investment and lowers total cost of ownership Real-time Traffic Redirection - Automatically redirects traffic to best available instances, servers and farms in the data center or between redundant sites for optimal user experience - Optimizes the use of existing applications and server resources and cost effectively scales resources, fully protecting server investment - IPv6 network support Global Load Balancing - Guarantees transaction completion and fast response times across multiple data centers to support business continuity and disaster recovery plans Performance Acceleration Faster Web Application Response Time - FastView web performance optimization – integrating the most advanced Web acceleration technology in the industry - Optimized acceleration per any browser and end-user device - Up to 40% response time reduction for increased conversion rates, revenues and productivity - Reduced total transferred content size through content compression Optimized IT Infrastructure Through Server Offloading - Secure Socket Layer (SSL) offloading - TCP connections multiplexing - Content caching - for both static and dynamic content - both at the browser and on the ADC, servicing user requests faster. Bandwidth Management and Traffic-Shaping Capabilities - Aligns bandwidth usage to meet business objectives - Provides administrators with the necessary tools to streamline enforcement of bandwidth management policies - Guarantees bandwidth allocation for latency-sensitive and mission-critical applications, as well as premium users, through the use of QoS algorithms Visibility Application Performance Monitoring (APM) - Real-time tracking of application SLA - Measure real user transactions including errors - Out-of-the-box solution, embedded with the ADC, no scripting nor installations. - Tracking SLA by location, user, application and transaction type ADC Infrastructure and Application Visibility - Real-time management dashboard which continuously monitors and displays application delivery services & system status, network and application performance & faults and more – allowing fast, efficient incident resolution - Cross-ADC historical reports delivering better capacity planning across the entire ADC infrastructure - Drilldown-able reports enab

OnDemand Switch Radware Alteon 4408-1GB /ODS-VL/6GE+2SFP/DUAL/4GB/HDD/ROHS 19010011  - STOCK FR - EXPÉDITION 24H 780.8 € Type de produit - Switch État - Fonctionnel Numéro de produit (PN) - 4408-1GB Modèle du produit - Alteon 4408-1GB /ODS-VL/6GE+2SFP/DUAL/4GB/HDD/ROHS Format - Rackable Garantie - 6 mois Contenu additionnel - Sans alimentation PN équivalent - 19010011 Nombre de ports - 8 ports Norme(s) réseau - 10/100/1000 Mbps POE - Non Features and Benefits: Alteon NG enables application delivery networking by providing safe and efficient distribution of business-critical applications across your company's network. Alteon NG is well suited for environments with growing SSL offloading needs. Service Availability Separate vADC per Application/Service - Complete isolation between virtual ADC (vADC) instances at the network, fault and configuration levels - Full resource reservation - Next-generation services can be enabled without impacting the performance of other service applications Smart Health Monitoring and Failure Detection - Quickly identifies failures at any point along the application or transaction path and reacts proactively - Hundreds of pre-defined health checks are instantly accessible (after installation), ensuring quick server/application availability and lowering total cost of ownership Stateful Persistency - Prevents application session disruptions - Ensures transaction completion Device Redundancy: Active-Active, Active-Backup or Active-Standby - Prevents the introduction of a single point of failure - Seamless device redundancy with VRRP support - Protects hardware investment and lowers total cost of ownership Real-time Traffic Redirection - Automatically redirects traffic to best available instances, servers and farms in the data center or between redundant sites for optimal user experience - Optimizes the use of existing applications and server resources and cost effectively scales resources, fully protecting server investment - IPv6 network support Global Load Balancing - Guarantees transaction completion and fast response times across multiple data centers to support business continuity and disaster recovery plans Performance Acceleration Faster Web Application Response Time - FastView web performance optimization – integrating the most advanced Web acceleration technology in the industry - Optimized acceleration per any browser and end-user device - Up to 40% response time reduction for increased conversion rates, revenues and productivity - Reduced total transferred content size through content compression Optimized IT Infrastructure Through Server Offloading - Secure Socket Layer (SSL) offloading - TCP connections multiplexing - Content caching - for both static and dynamic content - both at the browser and on the ADC, servicing user requests faster. Bandwidth Management and Traffic-Shaping Capabilities - Aligns bandwidth usage to meet business objectives - Provides administrators with the necessary tools to streamline enforcement of bandwidth management policies - Guarantees bandwidth allocation for latency-sensitive and mission-critical applications, as well as premium users, through the use of QoS algorithms Visibility Application Performance Monitoring (APM) - Real-time tracking of application SLA - Measure real user transactions including errors - Out-of-the-box solution, embedded with the ADC, no scripting nor installations. - Tracking SLA by location, user, application and transaction type ADC Infrastructure and Application Visibility - Real-time management dashboard which continuously monitors and displays application delivery services & system status, network and application performance & faults and more – allowing fast, efficient incident resolution - Cross-ADC historical reports delivering better capacity planning across the entire ADC infrastructure - Drilldown-able reports

OnDemand Switch Radware Alteon 4408-1GB /ODS-VL/6GE+2SFP/DUAL/4GB/HDD/ROHS 19010011  - STOCK FR - EXPÉDITION 24H 768.9 € Type de produit - Switch État - Fonctionnel Numéro de produit (PN) - 4408-1GB Modèle du produit - Alteon 4408-1GB /ODS-VL/6GE+2SFP/DUAL/4GB/HDD/ROHS Format - Rackable Garantie - 6 mois Contenu additionnel - Sans alimentation PN équivalent - 19010011 Nombre de ports - 8 ports Norme(s) réseau - 10/100/1000 Mbps POE - Non Features and Benefits: Alteon NG enables application delivery networking by providing safe and efficient distribution of business-critical applications across your company's network. Alteon NG is well suited for environments with growing SSL offloading needs. Service Availability Separate vADC per Application/Service - Complete isolation between virtual ADC (vADC) instances at the network, fault and configuration levels - Full resource reservation - Next-generation services can be enabled without impacting the performance of other service applications Smart Health Monitoring and Failure Detection - Quickly identifies failures at any point along the application or transaction path and reacts proactively - Hundreds of pre-defined health checks are instantly accessible (after installation), ensuring quick server/application availability and lowering total cost of ownership Stateful Persistency - Prevents application session disruptions - Ensures transaction completion Device Redundancy: Active-Active, Active-Backup or Active-Standby - Prevents the introduction of a single point of failure - Seamless device redundancy with VRRP support - Protects hardware investment and lowers total cost of ownership Real-time Traffic Redirection - Automatically redirects traffic to best available instances, servers and farms in the data center or between redundant sites for optimal user experience - Optimizes the use of existing applications and server resources and cost effectively scales resources, fully protecting server investment - IPv6 network support Global Load Balancing - Guarantees transaction completion and fast response times across multiple data centers to support business continuity and disaster recovery plans Performance Acceleration Faster Web Application Response Time - FastView web performance optimization – integrating the most advanced Web acceleration technology in the industry - Optimized acceleration per any browser and end-user device - Up to 40% response time reduction for increased conversion rates, revenues and productivity - Reduced total transferred content size through content compression Optimized IT Infrastructure Through Server Offloading - Secure Socket Layer (SSL) offloading - TCP connections multiplexing - Content caching - for both static and dynamic content - both at the browser and on the ADC, servicing user requests faster. Bandwidth Management and Traffic-Shaping Capabilities - Aligns bandwidth usage to meet business objectives - Provides administrators with the necessary tools to streamline enforcement of bandwidth management policies - Guarantees bandwidth allocation for latency-sensitive and mission-critical applications, as well as premium users, through the use of QoS algorithms Visibility Application Performance Monitoring (APM) - Real-time tracking of application SLA - Measure real user transactions including errors - Out-of-the-box solution, embedded with the ADC, no scripting nor installations. - Tracking SLA by location, user, application and transaction type ADC Infrastructure and Application Visibility - Real-time management dashboard which continuously monitors and displays application delivery services & system status, network and application performance & faults and more – allowing fast, efficient incident resolution - Cross-ADC historical reports delivering better capacity planning across the entire ADC infrastructure - Drilldown-able reports enab

Enterprise Grade Capacity: 600GB Speed: 15,000RPM Interface Types: SAS Serial Attached SCSI Form Factor: 2.5inx15mm SFF Server Drive Sector Size: 512 / 512e Sustained Throughput: 233 to 160 Average Seek Time: 2.0 Electrical Interface: SAS-3 Serial Attached SCSI v3 - 12.0Gbps On-Board Cache: 128MB SSD Type: MLC Hybrid SSD Cache: 32GB/MLC NAND Seagate ST600MP0005 600GB 2.5" 12.0 Gbps, 15,000 RPM, Enterprise-Multi Level Cell, Serial Attached SCSI Hybrid Hard Drive - Brand New Enterprise Performance 15K HDD High-Performing, Up to 600GB, Small Form Factor 15K Hard Drive     Stores twice the amount of Tier 1 data over previous generation, without increasing drive count, in 2.5-inch form factor     Enables faster transaction processing, which can result in increased revenue generation and improved customer satisfaction     Latest 12Gb/s SAS interface for improved scalability     Industry’s highest MTBF at 2.0M hours     Support for all drive formats, including 512 Native, 512 Emulation and 4K Native     Provides up to 18% improvement in SDR performance over prior generation     SAS-based Protection Information (PI) helps protect against inadvertent data change. Best-Fit Applications     High-performance Tier 1 enterprise servers     Blade, rack and tower servers hosting transaction-based applications     Power- and space-constrained data centers     Compliance and data security initiatives Alt. PN: 1MJ200-003, 1MJ200 Compatibility: This drive is compatible with any server that accepts 2.5"x15mm (SFF) SAS drives.