When using

- - - - - - - - - - - - Product Description After purchasing and receiving the goods, please pay attention to the following items: NOTE: The power must be cut off before the Epson print head is installed, otherwise it will cause the print head’s circuit board to be burned out. 1.When the print head is shipped, it will be coated with a protective liquid. When using it for the first time, wipe the print head before installing it. The protective liquid drops on the chip and where the ink bleeds. And use tissue to gently wipe the protective liquid on the chip (on the copper sheet). Don't use cleaning fluid or eraser. 2.During the regeneration process of the print head, the original ink will be cleaned and the protective liquid will be injected. If there is no protective liquid, printing will not be done when  the pipeline is dry. If the print head can be detected, but color irregularity or blurry is observed, you can continue to add ink to print, print sheets to use up the protection liquid. And then the color can be used to print. 3. If the printing is not clear, press the cleaning button of the machine. And the print head can be cleaned when the ink cartridge is full of ink. If there is no ink to clean the print head, it is easy to be burn out. And you can print clearly after printing a few times. 4. Clean the print head directly on the machine instead using cleaning fluid. If you clean it with cleaning fluid and do not drop the protective fluid, the print head will be completely blocked  and can not be used. 5. Don't use cleaning fluid or water to clean the print head, otherwise the print head will be completely blocked. When replacing the print head, please pay attention to the following items: 1.After receiving the print head, do not use a needle tube to inject water to check if the print head is blocked. It is a useless and dangerous practice. First of all, once the print head gets water and is not dry, and power on the machine, the main board will be burned out, and even the print head will be burned out. 2.The head surface of the print head is very fragile. It must not be touched, and needs to be protected. Its surface is an aluminum sheet, and inside is coated with a crystal oscillator and a very small ink tube. It will be deformed or even broken when touched, and the print head will be scrapped. 3.Be careful when installing the print head, be sure to cut off the power first, and install it in place. After installation, please push gently with your hands. Do not power on after installation, because if the head is not in place, the head will easily break when the machine moves. But your hands can feel, and it is easy to control. 4.When connecting the plug cable, do not be with ink. And make sure to make good contact with the socket and not touch the feet. Otherwise, it will cause the print head to short-circuit and burn. 5.The steel shaft should also be clean and smooth. Use tissue to stick some lubricating oil to wipe it off. Do not directly add oil to the shaft because excess oil will flow to the print head and cause damage. 6.After confirming that the machinery and circuit are normal, it is necessary to check the water circuit. First, check whether the amount of water in the ink cartridge is sufficient or not; second, check whether the small cleaning blade and the ink pump are dirty or not. 7.There will be air in the newly installed print head, so it will not print normally immediately. Only after the air in the print head is completely exhausted can the lines be printed normally. First of all, you can use the machine's cleaning function to perform intermittent cleaning (two cleanings each time,and then two more cleanings after a 30-minute pause). Excessive cleaning for many times will cause ink accumulation in the cleaning pump. It will not only cause color mixing and ink leakage, but also

Vous Pouvez Aussi Aimer - Tête d'impression Printhead pour iX4000 iX5000 iP3100 iP3000 MP710 MP730 MP740 55.19 EUR Free shipping - Tête d'impression Printhead pour 9100i S9000 S900 i9100 F9000 F900 QY6-0039 57.59 EUR Free shipping - Tête d'impression pour WF7610 WF7620 WF7611 WF7111 WF7621 WF3641 WF7710 A 65.99 EUR Free shipping - Tête d'impression Printhead pour i9900 I9950 IP8600 Pro900 9900i Mark II S 107.99 EUR Free shipping - Tête d'impression pour Epson WF-2630 L300 L301 XP315 XP415 ME401 ME303 WF-2520 59.99 EUR Free shipping - Tête d'impression pour HP 932 933 XL OfficeJet 7110 7610 7612 7600 6060e 6100e 57.59 EUR Free shipping - QY6-0075 Tête d'impression pour MP770 MP790 PIXMA MP750 MP760 860I 865R QY6-0049 41.99 EUR Free shipping - Tête d'impression pour e pson XP600/XP601/XP950/XP820 FA09050 Full Colors S 260.39 EUR Free shipping SAFE b'&' SECURE SHOPPING 100% SATISFACTION GUARANTEED FAST SHIPPING Store Categories Store Categories - Other - Voitures - Électronique grand public - Ordinateurs / tablettes et rés - Commerce et industrie - Maison et jardin - Articles de sport - Jouets et hobbies - Instruments de musique - Accessoires pour panneau de ba - Caméras et photos - Vêtements - Express Post'S Item 934 935 Tête d'impression pour HP Officejet Pro 6230 6830 6815 6812 6835 S Product Description After purchasing and receiving the goods, please pay attention to the following items: NOTE: The power must be cut off before the Epson print head is installed, otherwise it will cause the print head’s circuit board to be burned out. 1.When the print head is shipped, it will be coated with a protective liquid. When using it for the first time, wipe the print head before installing it. The protective liquid drops on the chip and where the ink bleeds. And use tissue to gently wipe the protective liquid on the chip (on the copper sheet). Don't use cleaning fluid or eraser. 2.During the regeneration process of the print head, the original ink will be cleaned and the protective liquid will be injected. If there is no protective liquid, printing will not be done when the pipeline is dry. If the print head can be detected, but color irregularity or blurry is observed, you can continue to add ink to print, print sheets to use up the protection liquid. And then the color can be used to print. 3. If the printing is not clear, press the cleaning button of the machine. And the print head can be cleaned when the ink cartridge is full of ink. If there is no ink to clean the print head, it is easy to be burn out. And you can print clearly after printing a few times. 4. Clean the print head directly on the machine instead using cleaning fluid. If you clean it with cleaning fluid and do not drop the protective fluid, the print head will be completely blocked and can not be used. 5. Don't use cleaning fluid or water to clean the print head, otherwise the print head will be completely blocked. When replacing the print head, please pay attention to the following items: 1.After receiving the print head, do not use a needle tube to inject water to check if the print head is blocked. It is a useless and dangerous practice. First of all, once the print head gets water and is not dry, and power on the machine, the main board will be burned out, and even the print head will be burned out. 2.The head surface of the print head is very fragile. It must not be touched, and needs to be protected. Its surface is an aluminum sheet, and inside is coated with a crystal oscillator and a very small ink tube. It will be deformed or even broken when touched, and the print head will be scrapped. 3.Be careful when installing the print head, be sure to cut off the power first, and install it in place. After installation, please push gently with your hands. Do not power on after installation, because if the head is not in place, the head will easily break when the machine moves. But your hands can feel, and it is easy to control. 4.When connecting the pl En savoir plus Collaboration commerciale.

- - - - - - - - - - - - - - - - - - - - - - - - Product Description After purchasing and receiving the goods, please pay attention to the following items: NOTE: The power must be cut off before the Epson print head is installed, otherwise it will cause the print head’s circuit board to be burned out. 1.When the print head is shipped, it will be coated with a protective liquid. When using it for the first time, wipe the print head before installing it. The protective liquid drops on the chip and where the ink bleeds. And use tissue to gently wipe the protective liquid on the chip (on the copper sheet). Don't use cleaning fluid or eraser. 2.During the regeneration process of the print head, the original ink will be cleaned and the protective liquid will be injected. If there is no protective liquid, printing will not be done when the pipeline is dry. If the print head can be detected, but color irregularity or blurry is observed, you can continue to add ink to print, print sheets to use up the protection liquid. And then the color can be used to print. 3. If the printing is not clear, press the cleaning button of the machine. And the print head can be cleaned when the ink cartridge is full of ink. If there is no ink to clean the print head, it is easy to be burn out. And you can print clearly after printing a few times. 4. Clean the print head directly on the machine instead using cleaning fluid. If you clean it with cleaning fluid and do not drop the protective fluid, the print head will be completely blocked and can not be used. 5. Don't use cleaning fluid or water to clean the print head, otherwise the print head will be completely blocked. When replacing the print head, please pay attention to the following items: 1.After receiving the print head, do not use a needle tube to inject water to check if the print head is blocked. It is a useless and dangerous practice. First of all, once the print head gets water and is not dry, and power on the machine, the main board will be burned out, and even the print head will be burned out. 2.The head surface of the print head is very fragile. It must not be touched, and needs to be protected. Its surface is an aluminum sheet, and inside is coated with a crystal oscillator and a very small ink tube. It will be deformed or even broken when touched, and the print head will be scrapped. 3.Be careful when installing the print head, be sure to cut off the power first, and install it in place. After installation, please push gently with your hands. Do not power on after installation, because if the head is not in place, the head will easily break when the machine moves. But your hands can feel, and it is easy to control. 4.When connecting the plug cable, do not be with ink. And make sure to make good contact with the socket and not touch the feet. Otherwise, it will cause the print head to short-circuit and burn. 5.The steel shaft should also be clean and smooth. Use tissue to stick some lubricating oil to wipe it off. Do not directly add oil to the shaft because excess oil will flow to the print head and cause damage. 6.After confirming that the machinery and circuit are normal, it is necessary to check the water circuit. First, check whether the amount of water in the ink cartridge is sufficient or not; second, check whether the small cleaning blade and the ink pump are dirty or not. 7.There will be air in the newly installed print head, so it will not print normally immediately. Only after the air in the print head is completely exhausted can the lines be printed normally. First of all, you can use the machine's cleaning function to perform intermittent cleaning (two cleanings each time,and then two more cleanings after a 30-minute pause). Excessive cleaning for many times will cause ink accumulation in the cleaning pump. It will not only cause color mixing and ink leakage, but also waste ink. 8.Secondly, you can print more pictures to let the print head exhaus En savoir plus Collaboration commerciale.

Vous Pouvez Aussi Aimer - Tête d'impression Printhead pour PIXMA PRO9500 Mark II nozzle QY6-0077 S 141.59 EUR Free shipping - Tête d'impression pour e pson XP600/XP601/XP950/XP820 FA09050 Full Colors S 260.39 EUR Free shipping - Tête d'impression pour Epson WF-2630 L300 L301 XP315 XP415 ME401 ME303 WF-2520 59.99 EUR Free shipping - Tête d'impression Printhead pour iX4000 iX5000 iP3100 iP3000 MP710 MP730 MP740 55.19 EUR Free shipping - QY6-0072 Tête d'impression Printhead pour iP4600 iP4680 iP4700 4760 MP630 S 45.59 EUR Free shipping - F173030 Tête d'impression pour epson 1390/1400/1410/1430/1500W R260 S 176.39 EUR Free shipping - QY6-0055 Tête d'impression Printhead pour i9900 iP8500 9950 ip9100 PRO9000 S 79.19 EUR Free shipping - Tête d'impression pour WF7610 WF7620 WF7611 WF7111 WF7621 WF3641 WF7710 A 65.99 EUR Free shipping SAFE b'&' SECURE SHOPPING 100% SATISFACTION GUARANTEED FAST SHIPPING Store Categories Store Categories - Other - Voitures - Électronique grand public - Ordinateurs / tablettes et rés - Commerce et industrie - Maison et jardin - Articles de sport - Jouets et hobbies - Instruments de musique - Accessoires pour panneau de ba - Caméras et photos - Vêtements - Express Post'S Item 934 935 Tête d'impression pour HP Officejet Pro 6230 6830 6815 6812 6835 S Product Description After purchasing and receiving the goods, please pay attention to the following items: NOTE: The power must be cut off before the Epson print head is installed, otherwise it will cause the print head’s circuit board to be burned out. 1.When the print head is shipped, it will be coated with a protective liquid. When using it for the first time, wipe the print head before installing it. The protective liquid drops on the chip and where the ink bleeds. And use tissue to gently wipe the protective liquid on the chip (on the copper sheet). Don't use cleaning fluid or eraser. 2.During the regeneration process of the print head, the original ink will be cleaned and the protective liquid will be injected. If there is no protective liquid, printing will not be done when the pipeline is dry. If the print head can be detected, but color irregularity or blurry is observed, you can continue to add ink to print, print sheets to use up the protection liquid. And then the color can be used to print. 3. If the printing is not clear, press the cleaning button of the machine. And the print head can be cleaned when the ink cartridge is full of ink. If there is no ink to clean the print head, it is easy to be burn out. And you can print clearly after printing a few times. 4. Clean the print head directly on the machine instead using cleaning fluid. If you clean it with cleaning fluid and do not drop the protective fluid, the print head will be completely blocked and can not be used. 5. Don't use cleaning fluid or water to clean the print head, otherwise the print head will be completely blocked. When replacing the print head, please pay attention to the following items: 1.After receiving the print head, do not use a needle tube to inject water to check if the print head is blocked. It is a useless and dangerous practice. First of all, once the print head gets water and is not dry, and power on the machine, the main board will be burned out, and even the print head will be burned out. 2.The head surface of the print head is very fragile. It must not be touched, and needs to be protected. Its surface is an aluminum sheet, and inside is coated with a crystal oscillator and a very small ink tube. It will be deformed or even broken when touched, and the print head will be scrapped. 3.Be careful when installing the print head, be sure to cut off the power first, and install it in place. After installation, please push gently with your hands. Do not power on after installation, because if the head is not in place, the head will easily break when the machine moves. But your hands can feel, and it is easy to control. 4.When connecting the plug cable, do n En savoir plus Collaboration commerciale.

- - - - - - - - - - - - Product Description After purchasing and receiving the goods, please pay attention to the following items: NOTE: The power must be cut off before the Epson print head is installed, otherwise it will cause the print head’s circuit board to be burned out. 1.When the print head is shipped, it will be coated with a protective liquid. When using it for the first time, wipe the print head before installing it. The protective liquid drops on the chip and where the ink bleeds. And use tissue to gently wipe the protective liquid on the chip (on the copper sheet). Don't use cleaning fluid or eraser. 2.During the regeneration process of the print head, the original ink will be cleaned and the protective liquid will be injected. If there is no protective liquid, printing will not be done when the pipeline is dry. If the print head can be detected, but color irregularity or blurry is observed, you can continue to add ink to print, print sheets to use up the protection liquid. And then the color can be used to print. 3. If the printing is not clear, press the cleaning button of the machine. And the print head can be cleaned when the ink cartridge is full of ink. If there is no ink to clean the print head, it is easy to be burn out. And you can print clearly after printing a few times. 4. Clean the print head directly on the machine instead using cleaning fluid. If you clean it with cleaning fluid and do not drop the protective fluid, the print head will be completely blocked and can not be used. 5. Don't use cleaning fluid or water to clean the print head, otherwise the print head will be completely blocked. When replacing the print head, please pay attention to the following items: 1.After receiving the print head, do not use a needle tube to inject water to check if the print head is blocked. It is a useless and dangerous practice. First of all, once the print head gets water and is not dry, and power on the machine, the main board will be burned out, and even the print head will be burned out. 2.The head surface of the print head is very fragile. It must not be touched, and needs to be protected. Its surface is an aluminum sheet, and inside is coated with a crystal oscillator and a very small ink tube. It will be deformed or even broken when touched, and the print head will be scrapped. 3.Be careful when installing the print head, be sure to cut off the power first, and install it in place. After installation, please push gently with your hands. Do not power on after installation, because if the head is not in place, the head will easily break when the machine moves. But your hands can feel, and it is easy to control. 4.When connecting the plug cable, do not be with ink. And make sure to make good contact with the socket and not touch the feet. Otherwise, it will cause the print head to short-circuit and burn. 5.The steel shaft should also be clean and smooth. Use tissue to stick some lubricating oil to wipe it off. Do not directly add oil to the shaft because excess oil will flow to the print head and cause damage. 6.After confirming that the machinery and circuit are normal, it is necessary to check the water circuit. First, check whether the amount of water in the ink cartridge is sufficient or not; second, check whether the small cleaning blade and the ink pump are dirty or not. 7.There will be air in the newly installed print head, so it will not print normally immediately. Only after the air in the print head is completely exhausted can the lines be printed normally. First of all, you can use the machine's cleaning function to perform intermittent cleaning (two cleanings each time,and then two more cleanings after a 30-minute pause). Excessive cleaning for many times will cause ink accumulation in the cleaning pump. It will not only cause color mixing and ink leakage, but also waste ink. 8.Secondly, you can print more pictures to let the print head exhaust air during work. Third, if the mac En savoir plus Collaboration commerciale.

Vous Pouvez Aussi Aimer - Tête d'impression pour e pson XP600/XP601/XP950/XP820 FA09050 Full Colors S 260.39 EUR Free shipping - Tête d'impression pour HP 932 933 XL OfficeJet 7110 7610 7612 7600 6060e 6100e 57.59 EUR Free shipping - QY6-0075 Tête d'impression pour MP770 MP790 PIXMA MP750 MP760 860I 865R QY6-0049 41.99 EUR Free shipping - Tête d'impression Printhead Full Color pour PIXMA iP100 IP110 S 62.39 EUR Free shipping - 952 955 Tête d'impression pour HP Officejet Pro 8710 8216 7740 8720 8730 8210 S 92.39 EUR Free shipping - ESP C100 C110 C310 C315 C300 ESP 3.2 Hero 5.1/3.1 Tête d'impression S 34.79 EUR Free shipping - QY6-0055 Tête d'impression Printhead pour i9900 iP8500 9950 ip9100 PRO9000 S 79.19 EUR Free shipping - Tête d'impression Printhead pour PIXMA PRO9500 Mark II nozzle QY6-0077 S 141.59 EUR Free shipping SAFE b'&' SECURE SHOPPING 100% SATISFACTION GUARANTEED FAST SHIPPING Store Categories Store Categories - Other - Voitures - Électronique grand public - Ordinateurs / tablettes et rés - Commerce et industrie - Maison et jardin - Articles de sport - Jouets et hobbies - Instruments de musique - Accessoires pour panneau de ba - Caméras et photos - Vêtements - Express Post'S Item 934 935 Tête d'impression pour HP Officejet Pro 6230 6830 6815 6812 6835 S Product Description After purchasing and receiving the goods, please pay attention to the following items: NOTE: The power must be cut off before the Epson print head is installed, otherwise it will cause the print head’s circuit board to be burned out. 1.When the print head is shipped, it will be coated with a protective liquid. When using it for the first time, wipe the print head before installing it. The protective liquid drops on the chip and where the ink bleeds. And use tissue to gently wipe the protective liquid on the chip (on the copper sheet). Don't use cleaning fluid or eraser. 2.During the regeneration process of the print head, the original ink will be cleaned and the protective liquid will be injected. If there is no protective liquid, printing will not be done when the pipeline is dry. If the print head can be detected, but color irregularity or blurry is observed, you can continue to add ink to print, print sheets to use up the protection liquid. And then the color can be used to print. 3. If the printing is not clear, press the cleaning button of the machine. And the print head can be cleaned when the ink cartridge is full of ink. If there is no ink to clean the print head, it is easy to be burn out. And you can print clearly after printing a few times. 4. Clean the print head directly on the machine instead using cleaning fluid. If you clean it with cleaning fluid and do not drop the protective fluid, the print head will be completely blocked and can not be used. 5. Don't use cleaning fluid or water to clean the print head, otherwise the print head will be completely blocked. When replacing the print head, please pay attention to the following items: 1.After receiving the print head, do not use a needle tube to inject water to check if the print head is blocked. It is a useless and dangerous practice. First of all, once the print head gets water and is not dry, and power on the machine, the main board will be burned out, and even the print head will be burned out. 2.The head surface of the print head is very fragile. It must not be touched, and needs to be protected. Its surface is an aluminum sheet, and inside is coated with a crystal oscillator and a very small ink tube. It will be deformed or even broken when touched, and the print head will be scrapped. 3.Be careful when installing the print head, be sure to cut off the power first, and install it in place. After installation, please push gently with your hands. Do not power on after installation, because if the head is not in place, the head will easily break when the machine moves. But your hands can feel, and it is easy to control. 4.When connecting the plug cable, do not be En savoir plus Collaboration commerciale.

Vous Pouvez Aussi Aimer - QY6-0072 Tête d'impression Printhead pour iP4600 iP4680 iP4700 4760 MP630 S 45.59 EUR Free shipping - Tête d'impression pour WF7610 WF7620 WF7611 WF7111 WF7621 WF3641 WF7710 A 65.99 EUR Free shipping - Tête d'impression pour e pson XP600/XP601/XP950/XP820 FA09050 Full Colors S 260.39 EUR Free shipping - Tête d'impression pour iP8720 iP8750 iP8780 MG6310 MG7520 MG7180 QY6-0083 S 49.19 EUR Free shipping - QY6-0075 Tête d'impression pour MP770 MP790 PIXMA MP750 MP760 860I 865R QY6-0049 41.99 EUR Free shipping - QY6-0084 Tête d'impression Print Head pour PRO-100 PRO 100 QY6-0084-000 128.39 EUR Free shipping - ESP C100 C110 C310 C315 C300 ESP 3.2 Hero 5.1/3.1 Tête d'impression S 34.79 EUR Free shipping - Tête d'impression pour Epson WF-2630 L300 L301 XP315 XP415 ME401 ME303 WF-2520 59.99 EUR Free shipping SAFE b'&' SECURE SHOPPING 100% SATISFACTION GUARANTEED FAST SHIPPING Store Categories Store Categories - Other - Voitures - Électronique grand public - Ordinateurs / tablettes et rés - Commerce et industrie - Maison et jardin - Articles de sport - Jouets et hobbies - Instruments de musique - Accessoires pour panneau de ba - Caméras et photos - Vêtements - Express Post'S Item 934 935 Tête d'impression pour HP Officejet Pro 6230 6830 6815 6812 6835 S Product Description After purchasing and receiving the goods, please pay attention to the following items: NOTE: The power must be cut off before the Epson print head is installed, otherwise it will cause the print head’s circuit board to be burned out. 1.When the print head is shipped, it will be coated with a protective liquid. When using it for the first time, wipe the print head before installing it. The protective liquid drops on the chip and where the ink bleeds. And use tissue to gently wipe the protective liquid on the chip (on the copper sheet). Don't use cleaning fluid or eraser. 2.During the regeneration process of the print head, the original ink will be cleaned and the protective liquid will be injected. If there is no protective liquid, printing will not be done when the pipeline is dry. If the print head can be detected, but color irregularity or blurry is observed, you can continue to add ink to print, print sheets to use up the protection liquid. And then the color can be used to print. 3. If the printing is not clear, press the cleaning button of the machine. And the print head can be cleaned when the ink cartridge is full of ink. If there is no ink to clean the print head, it is easy to be burn out. And you can print clearly after printing a few times. 4. Clean the print head directly on the machine instead using cleaning fluid. If you clean it with cleaning fluid and do not drop the protective fluid, the print head will be completely blocked and can not be used. 5. Don't use cleaning fluid or water to clean the print head, otherwise the print head will be completely blocked. When replacing the print head, please pay attention to the following items: 1.After receiving the print head, do not use a needle tube to inject water to check if the print head is blocked. It is a useless and dangerous practice. First of all, once the print head gets water and is not dry, and power on the machine, the main board will be burned out, and even the print head will be burned out. 2.The head surface of the print head is very fragile. It must not be touched, and needs to be protected. Its surface is an aluminum sheet, and inside is coated with a crystal oscillator and a very small ink tube. It will be deformed or even broken when touched, and the print head will be scrapped. 3.Be careful when installing the print head, be sure to cut off the power first, and install it in place. After installation, please push gently with your hands. Do not power on after installation, because if the head is not in place, the head will easily break when the machine moves. But your hands can feel, and it is easy to control. 4.When connecting the plug cable, do no En savoir plus Collaboration commerciale.

- 920 Testina Di Stampa Printhead Per Hp 6500 6500A 7000 7500A B210A Cd868-30002 46.79 EUR Free shipping - QY6-0078 Testina di stampa Printhead per MG6220 6140 6180 6100 6150 6200 61.19 EUR Free shipping - F173030 Testina Di Stampa Printhead Per 1390/1400/1410/1430/1500W Y1 182.39 EUR Free shipping - QY6-0072 Testina di stampa Printhead per iP4600 iP4680 iP4700 iP4760 MP630 52.79 EUR Free shipping - Testina di stampa stampante per HP 862/564 B110A B210A B109A B109N C410A C309A 44.39 EUR Free shipping - 564 Testina Di Stampa Printhead Per Photosmart 7510 7515 7520 7525 Cb326-30002 39.59 EUR Free shipping - 952 955 Testina di stampa Printhead per HP Pro 8710 8216 8720 8730 8740 8210 G 98.39 EUR Free shipping - PrintHead per iP7220 iP7250 IP7240/7210 MG5420/5422/5450/6400 QY6-0082 New 56.39 EUR Free shipping - Testina di stampa per iP8720 iP8750 iP8780 MG6310 MG7520 MG7180 QY6-0083 56.39 EUR Free shipping - Testina di stampa stampante per HP 932XL OfficeJet 7110 7610 7612 7600 6060 6100 63.59 EUR Free shipping - Testina di stampa stampante per L300 L303 L351 L355 L358 L111/120 L211 NEW 67.19 EUR Free shipping - Testina di stampa Print Head 6 Colors per TX800 TX820 A800 F192040 146.39 EUR Free shipping - QY6-0055 Testina di stampa Printhead per Canon i9900 iP8500 i9950 ip9100 PRO9000 85.19 EUR Free shipping - QY6-0059 Testina di stampa Printhead per IP4200 MP500 MP530 IT 50.39 EUR Free shipping - 950 951 Testina di stampa Printhead per HP Pro 8100 8600 8640 251DW 276dw A7 133.19 EUR Free shipping - QY6-0089 Testina di stampa Printhead per TS5080 6020 6050 6051 6052 TS6080 R0 61.19 EUR Free shipping - QY6-0039 Testina di stampa Printhead 9100i S9000 S900 i9100 F9000 F900 F930 IT 63.59 EUR Free shipping - Testina di stampa per IP3600 iP3680 MP560 MP540 MP620 MX860 MX870 MG5140 45.59 EUR Free shipping - Testina di stampa stampante per iP6600D iP6700D iP6600 iP6700 QY6-0063 49.19 EUR Free shipping - CN688A Testina di stampa Printhead per HP 3070 3520 3525 5525 4620 5520 5510 IT 41.99 EUR Free shipping - - - - - - - - - - - - Product Description After purchasing and receiving the goods, please pay attention to the following items: NOTE: The power must be cut off before the Epson print head is installed, otherwise it will cause the print head’s circuit board to be burned out. 1.When the print head is shipped, it will be coated with a protective liquid. When using it for the first time, wipe the print head before installing it. The protective liquid drops on the chip and where the ink bleeds. And use tissue to gently wipe the protective liquid on the chip (on the copper sheet). Don't use cleaning fluid or eraser. 2.During the regeneration process of the print head, the original ink will be cleaned and the protective liquid will be injected. If there is no protective liquid, printing will not be done when the pipeline is dry. If the print head can be detected, but color irregularity or blurry is observed, you can continue to add ink to print, print sheets to use up the protection liquid. And then the color can be used to print. 3. If the printing is not clear, press the cleaning button of the machine. And the print head can be cleaned when the ink cartridge is full of ink. If there is no ink to clean the print head, it is easy to be burn out. And you can print clearly after printing a few times. 4. Clean the print head directly on the machine instead using cleaning fluid. If you clean it with cleaning fluid and do not drop the protective fluid, the print head will be completely blocked and can not be used. 5. Don't use cleaning fluid or water to clean the print head, otherwise the print head will be completely blocked. When replacing the print head, please pay attention to the following items: 1.After receiving the print head, do not use a needle tube to inject water to check if the print head is blocked. It is a useless and dangerous practice. First of all, once the print head gets water and is not dry, En savoir plus Collaboration commerciale.

- F173030 Testina Di Stampa Printhead Per 1390/1400/1410/1430/1500W Y1 182.39 EUR Free shipping - Testina di stampa stampante per L300 L303 L351 L355 L358 L111/120 L211 NEW 67.19 EUR Free shipping - 950 951 Testina di stampa Printhead per HP Pro 8100 8600 8640 251DW 276dw A7 133.19 EUR Free shipping - Testina di stampa stampante per 10 ESP 3 5 7 9 5100 5300 3250 5210 6150 44.39 EUR Free shipping - 952 955 Testina di stampa Printhead per HP Pro 8710 8216 8720 8730 8740 8210 G 98.39 EUR Free shipping - 14N0700 Testina di stampa Printhead per Lexmark Pro805 Pro205 209 S408 S505 IT 49.19 EUR Free shipping - QY6-0089 Testina di stampa Printhead per TS5080 6020 6050 6051 6052 TS6080 R0 61.19 EUR Free shipping - Testina di stampa per iP8720 iP8750 iP8780 MG6310 MG7520 MG7180 QY6-0083 56.39 EUR Free shipping - Testina di stampa Printhead Office 2100 / 2150 / 2170 Hero 3.1 / 4.2 41.99 EUR Free shipping - 564 Testina Di Stampa Printhead Per Photosmart 7510 7515 7520 7525 Cb326-30002 39.59 EUR Free shipping - PrintHead per iP7220 iP7250 IP7240/7210 MG5420/5422/5450/6400 QY6-0082 New 56.39 EUR Free shipping - QY6-0059 Testina di stampa Printhead per IP4200 MP500 MP530 IT 50.39 EUR Free shipping - Testina di stampa stampante per HP 932XL OfficeJet 7110 7610 7612 7600 6060 6100 63.59 EUR Free shipping - QY6-0055 Testina di stampa Printhead per Canon i9900 iP8500 i9950 ip9100 PRO9000 85.19 EUR Free shipping - QY6-0072 Testina di stampa Printhead per iP4600 iP4680 iP4700 iP4760 MP630 52.79 EUR Free shipping - Testina di stampa stampante per iP6600D iP6700D iP6600 iP6700 QY6-0063 49.19 EUR Free shipping - Testina di stampa stampante per HP 862/564 B110A B210A B109A B109N C410A C309A 44.39 EUR Free shipping - Testina di stampa per IP3600 iP3680 MP560 MP540 MP620 MX860 MX870 MG5140 45.59 EUR Free shipping - QY6-0078 Testina di stampa Printhead per MG6220 6140 6180 6100 6150 6200 61.19 EUR Free shipping - Testina di stampa Print Head 6 Colors per TX800 TX820 A800 F192040 146.39 EUR Free shipping - - - - - - - - - - - - - - - - - - - - - - - - Product Description After purchasing and receiving the goods, please pay attention to the following items: NOTE: The power must be cut off before the Epson print head is installed, otherwise it will cause the print head’s circuit board to be burned out. 1.When the print head is shipped, it will be coated with a protective liquid. When using it for the first time, wipe the print head before installing it. The protective liquid drops on the chip and where the ink bleeds. And use tissue to gently wipe the protective liquid on the chip (on the copper sheet). Don't use cleaning fluid or eraser. 2.During the regeneration process of the print head, the original ink will be cleaned and the protective liquid will be injected. If there is no protective liquid, printing will not be done when the pipeline is dry. If the print head can be detected, but color irregularity or blurry is observed, you can continue to add ink to print, print sheets to use up the protection liquid. And then the color can be used to print. 3. If the printing is not clear, press the cleaning button of the machine. And the print head can be cleaned when the ink cartridge is full of ink. If there is no ink to clean the print head, it is easy to be burn out. And you can print clearly after printing a few times. 4. Clean the print head directly on the machine instead using cleaning fluid. If you clean it with cleaning fluid and do not drop the protective fluid, the print head will be completely blocked and can not be used. 5. Don't use cleaning fluid or water to clean the print head, otherwise the print head will be completely blocked. When replacing the print head, please pay attention to the following items: 1.After receiving the print head, do not use a needle tube to inject water to check if the print head is blocked. It is a useless and dangerous practice. First of all, once the print head gets wat En savoir plus Collaboration commerciale.

- 920 Testina Di Stampa Printhead Per Hp 6500 6500A 7000 7500A B210A Cd868-30002 46.79 EUR Free shipping - Testina di stampa stampante per HP 932XL OfficeJet 7110 7610 7612 7600 6060 6100 63.59 EUR Free shipping - F173030 Testina Di Stampa Printhead Per 1390/1400/1410/1430/1500W Y1 182.39 EUR Free shipping - QY6-0039 Testina di stampa Printhead 9100i S9000 S900 i9100 F9000 F900 F930 IT 63.59 EUR Free shipping - 950 951 Testina di stampa Printhead per HP Pro 8100 8600 8640 251DW 276dw A7 133.19 EUR Free shipping - Testina di stampa stampante per L300 L303 L351 L355 L358 L111/120 L211 NEW 67.19 EUR Free shipping - Testina di stampa stampante per HP 862/564 B110A B210A B109A B109N C410A C309A 44.39 EUR Free shipping - 14N0700 Testina di stampa Printhead per Lexmark Pro805 Pro205 209 S408 S505 IT 49.19 EUR Free shipping - QY6-0089 Testina di stampa Printhead per TS5080 6020 6050 6051 6052 TS6080 R0 61.19 EUR Free shipping - QY6-0059 Testina di stampa Printhead per IP4200 MP500 MP530 IT 50.39 EUR Free shipping - Testina di stampa stampante per 10 ESP 3 5 7 9 5100 5300 3250 5210 6150 44.39 EUR Free shipping - QY6-0078 Testina di stampa Printhead per MG6220 6140 6180 6100 6150 6200 61.19 EUR Free shipping - PrintHead per iP7220 iP7250 IP7240/7210 MG5420/5422/5450/6400 QY6-0082 New 56.39 EUR Free shipping - 952 955 Testina di stampa Printhead per HP Pro 8710 8216 8720 8730 8740 8210 G 98.39 EUR Free shipping - Testina di stampa per IP3600 iP3680 MP560 MP540 MP620 MX860 MX870 MG5140 45.59 EUR Free shipping - Testina di stampa stampante per iP6600D iP6700D iP6600 iP6700 QY6-0063 49.19 EUR Free shipping - Testina di stampa per iP8720 iP8750 iP8780 MG6310 MG7520 MG7180 QY6-0083 56.39 EUR Free shipping - QY6-0072 Testina di stampa Printhead per iP4600 iP4680 iP4700 iP4760 MP630 52.79 EUR Free shipping - Testina di stampa Print Head 6 Colors per TX800 TX820 A800 F192040 146.39 EUR Free shipping - 564 Testina Di Stampa Printhead Per Photosmart 7510 7515 7520 7525 Cb326-30002 39.59 EUR Free shipping - - - - - - - - - - - - Product Description After purchasing and receiving the goods, please pay attention to the following items: NOTE: The power must be cut off before the Epson print head is installed, otherwise it will cause the print head’s circuit board to be burned out. 1.When the print head is shipped, it will be coated with a protective liquid. When using it for the first time, wipe the print head before installing it. The protective liquid drops on the chip and where the ink bleeds. And use tissue to gently wipe the protective liquid on the chip (on the copper sheet). Don't use cleaning fluid or eraser. 2.During the regeneration process of the print head, the original ink will be cleaned and the protective liquid will be injected. If there is no protective liquid, printing will not be done when the pipeline is dry. If the print head can be detected, but color irregularity or blurry is observed, you can continue to add ink to print, print sheets to use up the protection liquid. And then the color can be used to print. 3. If the printing is not clear, press the cleaning button of the machine. And the print head can be cleaned when the ink cartridge is full of ink. If there is no ink to clean the print head, it is easy to be burn out. And you can print clearly after printing a few times. 4. Clean the print head directly on the machine instead using cleaning fluid. If you clean it with cleaning fluid and do not drop the protective fluid, the print head will be completely blocked and can not be used. 5. Don't use cleaning fluid or water to clean the print head, otherwise the print head will be completely blocked. When replacing the print head, please pay attention to the following items: 1.After receiving the print head, do not use a needle tube to inject water to check if the print head is blocked. It is a useless and dangerous practice. First of all, once the print head gets water and is not dry, and power En savoir plus Collaboration commerciale.

- 920 Testina Di Stampa Printhead Per Hp 6500 6500A 7000 7500A B210A Cd868-30002 41.99 EUR Free shipping - Testina di stampa per iP8720 iP8750 iP8780 MG6310 MG7520 MG7180 QY6-0083 49.19 EUR Free shipping - 950 951 Testina di stampa Printhead per HP Pro 8100 8600 8640 251DW 276dw A7 131.99 EUR Free shipping - QY6-0072 Testina di stampa Printhead per iP4600 iP4680 iP4700 iP4760 MP630 46.79 EUR Free shipping - QY6-0086 Testina di stampa Printhead per MX920 MX922 MX925 MX720 MX728 101.99 EUR Free shipping - Testina di stampa per IP3600 iP3680 MP560 MP540 MP620 MX860 MX870 MG5140 39.59 EUR Free shipping - QY6-0076 Testina di stampa Printhead per i9900 I9950 IP8600 Pro900 9900i Mark II 109.19 EUR Free shipping - Testina di stampa Printhead Office 2100 / 2150 / 2170 Hero 3.1 / 4.2 37.19 EUR Free shipping - Testina di stampa stampante per HP 932XL OfficeJet 7110 7610 7612 7600 6060 6100 59.99 EUR Free shipping - QY6-0039 Testina di stampa Printhead 9100i S9000 S900 i9100 F9000 F900 F930 IT 61.19 EUR Free shipping - QY6-0055 Testina di stampa Printhead per Canon i9900 iP8500 i9950 ip9100 PRO9000 81.59 EUR Free shipping - 952 955 Testina di stampa Printhead per HP Pro 8710 8216 8720 8730 8740 8210 G 95.99 EUR Free shipping - CN688A Testina di stampa Printhead per HP 3070 3520 3525 5525 4620 5520 5510 IT 38.39 EUR Free shipping - Testina di stampa stampante per HP 862/564 B110A B210A B109A B109N C410A C309A 39.59 EUR Free shipping - Testina di stampa stampante per L300 L303 L351 L355 L358 L111/120 L211 NEW 59.99 EUR Free shipping - QY6-0068 Testina di stampa Printhead Full Color per PIXMA iP100 IP110 A7 63.59 EUR Free shipping - Testina di stampa stampante per iP6600D iP6700D iP6600 iP6700 QY6-0063 43.19 EUR Free shipping - Testina di stampa stampante per 10 ESP 3 5 7 9 5100 5300 3250 5210 6150 39.59 EUR Free shipping - 564 Testina Di Stampa Printhead Per Photosmart 7510 7515 7520 7525 Cb326-30002 34.79 EUR Free shipping - QY6-0059 Testina di stampa Printhead per IP4200 MP500 MP530 IT 46.79 EUR Free shipping - - - - - - - - - - - - Product Description After purchasing and receiving the goods, please pay attention to the following items: NOTE: The power must be cut off before the Epson print head is installed, otherwise it will cause the print head’s circuit board to be burned out. 1.When the print head is shipped, it will be coated with a protective liquid. When using it for the first time, wipe the print head before installing it. The protective liquid drops on the chip and where the ink bleeds. And use tissue to gently wipe the protective liquid on the chip (on the copper sheet). Don't use cleaning fluid or eraser. 2.During the regeneration process of the print head, the original ink will be cleaned and the protective liquid will be injected. If there is no protective liquid, printing will not be done when the pipeline is dry. If the print head can be detected, but color irregularity or blurry is observed, you can continue to add ink to print, print sheets to use up the protection liquid. And then the color can be used to print. 3. If the printing is not clear, press the cleaning button of the machine. And the print head can be cleaned when the ink cartridge is full of ink. If there is no ink to clean the print head, it is easy to be burn out. And you can print clearly after printing a few times. 4. Clean the print head directly on the machine instead using cleaning fluid. If you clean it with cleaning fluid and do not drop the protective fluid, the print head will be completely blocked and can not be used. 5. Don't use cleaning fluid or water to clean the print head, otherwise the print head will be completely blocked. When replacing the print head, please pay attention to the following items: 1.After receiving the print head, do not use a needle tube to inject water to check if the print head is blocked. It is a useless and dangerous practice. First of all, once the print head gets water and is not En savoir plus Collaboration commerciale.

Carte mère Motherboard Micro ATX MSI B350M GAMING PRO AMD AM4. La carte mère est en parfait état de fonctionnement et en parfait état cosmétique.  Avec plaque arrière (I/O Shield) Caractéristiques: Chipset • AMD®B350 Chipset   Main Memory • 2 x DDR4 memory slots, support up to 64GB *ComboPI 1.0.0.3-based and above BIOS are required. - Supports DDR4 1866/ 2133/ 2400/ 2667(OC)/ 2933(OC)/ 3200(OC)+ MHz* • Dual channel memory architecture • Supports non-ECC UDIMM memory • Supports ECC UDIMM memory (non-ECC mode) * A-series / Athlon™ X4 processors support up to DDR 2400 MHz only. Please refer www.msi.com for more information on compatible memory.   Slots • 1 x PCIe 3.0 x16 slots - Supports x8 speed with AMD® Ryzen™ with Radeon™ Vega Graphics and A-series / Athlon™ X4 Processors - Supports x4 speed with AMD® Athlon™ with Radeon™ Vega Graphics Processors • 2 x PCIe 2.0 x1 slots     Onboard Graphics • 1 x VGA port, supports a maximum resolution of 2048x1280@60Hz, 1920x1200@60Hz(*1,2,3) • 1 x DVI-D port, supports a maximum resolution of 1920x1200@60Hz(*1,3) • 1 x HDMI™ port, supports a maximum resolution of 4096x2160@24Hz(*1,2,3) 1. Only support when using AMD® Ryzen™ with Radeon™ Vega Graphics/ Athlon™ with Radeon™ Vega Graphics and A-series Processors 2. Due to CPU spec limitation, when using AMD Athlon™ with Radeon™ Vega Graphics Processors, it could support up to 2 display with HDMI/ VGA output. 3. Maximum shared memory of 2048 MB Storage • AMD®B350 Chipset • 4 x SATA 6Gb/s ports - Supports RAID 0, RAID1 and RAID 10 • 1 x M.2 slots (Key M) - Supports PCIe 3.0 x4 (RYZEN series processors) or PCIe 3.0 x2(AMD® Athlon™ with Radeon™ Vega Graphics and A-series / Athlon™ X4 Processors) and SATA 6Gb/s 2242/ 2260 /2280 storage devices   USB • AMD®B350 Chipset - 2 x USB 3.1 Gen1 (SuperSpeed USB) ports through the internal USB 3.1 Gen1 connector - 6 x USB 2.0 (High-speed USB) ports (2 ports on the back panel, 4 ports available through the internal USB connectors) • AMD® CPU Chipset - 4 x USB 3.1 Gen1 (SuperSpeed USB) Type-A ports on the back panel   Audio • Realtek® ALC887 Codec - 7.1-Channel High Definition Audio     LAN  • 1 x Realtek® 8111H Gigabit LAN controller     Internal I/O Connectors - 1 x 24-pin ATX main power connector - 1 x 8-pin ATX 12V power connector - 4 x SATA 6Gb/s connectors - 2 x USB 2.0 connectors (supports additional 4 USB 2.0 ports) - 1 x USB 3.1 Gen1 connector (supports additional 2 USB 3.1 Gen1 ports) - 1 x 4-pin CPU fan connector - 2 x 4-pin system fan connectors - 1 x Front panel audio connector - 2 x Front panel connectors - 1 x TPM module connector - 1 x Chassis Intrusion connector - 1 x Serial port connector - 1 x Parallel port connector - 1 x Extended LED strip connector - 1 x Clear CMOS jumper     Back Panel I/O Ports - 1 x PS/2 keyboard/ mouse combo port - 2 x USB 2.0 Type-A ports - 1 x VGA port - 1 x DVI-D port - 1 x HDMI™ port - 4 x USB 3.1 Gen1 Type-A ports - 1 x LAN (RJ45) port - 3 x audio jacks   Dimension • 9.6 in. x 8.7 in. (24.4 cm x 21.0 cm) • m-ATX Form Factor   Mounting • 9 mounting holes

IPTV Smarters VLC Smart IPTV, MAG 12 mois abonnement, Film & Series,SPORT Notice: To ensure a fast and easy set up, we ask that you leave a note at the time of order stating the following: _Device type _App Name If Using _Mac Address (if Using MAG Box, STB Emu, Smart IPTV)   What We Recommend? Good internet connection for best results when using IPTV At Least 4 MG   Support Devices? Any smart TV All Android Devices,  apple devises,  Mag Boxes M3U -URL-VLC

4 CD-ROM - GALAXY OF CLIPART Deluxe Edition, 75,000 images Romtech 1997 en grosse boite carton. Review:  Pour Galaxy of Clipart Romtech 75000 Images exceptionnelles, Polices de Photo Nous sommes convaincus que vous avez rencontré de tels composants de page Internet dont le but est de détacher le contenu du site. Ils sont célèbres en tant que lignes et séparateurs et ils ont également la possibilité d’être décorés à l’aide de cliparts ou d’être l’élément clipart en entier. Commençons donc par apprendre un genre de clipart que quelqu'un appelle «clipart réaliste», mais dont le nom officiel est «objet photo». L'élément photo est une image spécifique qui a été recadrée à partir d'une photo et est considérée comme un type de clipart. N'oubliez pas, lorsque vous utilisez des images clipart de douche de bébé, d'utiliser un seul thème dans votre projet. Par exemple, votre invitation doit correspondre à vos cartes de remerciement, utilisez donc le même clipart et le même design lorsque vous créez les deux. Vous ne voudrez pas non plus encombrer votre projet avec trop de morceaux différents de cliparts de douche de bébé. Un fouillis rendra vos invitations désordonnées et mal pensées. Faites attention à la couleur, la taille et le format lorsque vous choisissez des cliparts de douche de bébé. Avec un peu de pratique et de patience, vous créerez de superbes invitations pour une fête de naissance, des cartes de remerciement et même des cartes de jeu Il existe de nombreux types de cliparts. Vous pouvez trouver des cliparts réconfortants et sentimentaux et des cliparts incroyablement drôles. Il y a des dessins de bébés dans des couches et des bébés sans couches, des bébés doux dans des berceaux et des bébés mignons avec des ours en peluche. À saisir rapidement !! WYSIWYG voir photo. En parfait état. Zoomer sur photos. Photos complémentaires sur demande. Envoi rapide et soigné sous 2 jours. - L'inquiétude demeurant sur un retour irrémédiablement abîmé de ce fragile article, les retours ne sont malheureusement pas acceptés mais pour évaluer personnellement la marchandise, et éviter les frais d'envoi, la seule solution que je puisse vous proposer c'est une remise en mains propres à la gare SNCF 92380 Garches-Marnes La Coquette sans frais.   - RÈGLEMENT VIA PAYPAL   - France: Frais de port et d'emballage en Colissimo: +9.20. - France: Frais de port et d'emballage en Mondial Relay pour la France: +6,50€ - Les frais d’envoi à l’international varient selon la destination:             - Livraison Économique Internationale Europe par MONDIAL RELAY quand possible.             - Livraison Internationale Europe par La Poste Colissimo (+13,30€).             - Pour toute autre destination internationale me consulter avant de payer l’objet. ********* 4 CD-ROM GALAXY OF CLIPART Deluxe Edition, 75,000 images Romtech 1997 with original big box. Review: For Galaxy of Clipart Romtech 75000 Exceptional Images Photo Fonts We are confident you have met such Internet page components which purpose is in detaching site content. They are famous as lines and dividers and they have an opportunity to also be decorated with help of clipart or be the clipart element in whole. So first let us learn such a kind of clipart that someone calls “realistic clipart”, but the official name of it is “photo object”. photo element is a specific image which was cropped from a photo and is considered to be a type of clipart. Remember, when using baby shower clipart, to use a single theme throughout your project. For example, your invitation should match your thank you cards, so use the same clipart and design when making both. You will also not want to clutter your project with too many different pieces of baby shower clipart. Clutter will make your invitations look messy and not well thought out. Pay attention to color, size and format when choosing baby shower clipart. With some pra

EVOLUENT VERTICALMOUSE 4 LEFT. Many people find using a standard mouse uncomfortable. This is caused by the design of a standard mouse causing the arm to twist slightly so that the palm faces downwards. The Evoluent mouse takes the functionality of a standard mouse, whilst redesigning its positioning completely to ensure that it is as comfortable as it can possibly be. In order to do this the Evoluent mouse is held in a ‘handshake grip’. This means that the bones of the forearm do not need to twist, and the hand can rest in its natural position on the desk. Not only is this more comfortable to use, it also allows for more precise movements to be made, giving you more control of the cursor on the screen. The bottom of the mouse also has a raised lip, meaning that as the mouse moves, the user’s hand doesn’t drag rub against the table, as is common with standard mice. The mouse features six individual buttons. Each of these can be customised so that frequent windows or applications can be opened or closed without needing to use any keyboard shortcuts. This in turn reduces the amount of movement needed when using the mouse, giving the arm more chance to rest. In addition to this the sensor sensitivity can be adjusted, allowing the user to make sure that the cursor always moves at the right speed for them. The left wired edition has been designed specifically for left handed users, ensuring that it can be gripped in the most comfortable way possible, and that all of the buttons are positioned for use with your left hand. En savoir plus Collaboration commerciale.

ETEPON pour écran Raspberry Pi 4, Moniteur Tactile Capacitif HDMI de 7 Pouces Écran LCD 1024 * 600 HD La description ETEPON Capacitive Touch LCD Display HDMI Input 1024× 600 with Case Stand for 7 Inch Raspberry Pi Screen when the 7 inch Touch Screen work with the Raspberry Pi, it supports the Raspbian, Ubuntu, Win10 IoT, single-touch and free drive, When using as a computer monitor, It supports Windows 10/ 8. 1/ 8/ 7, five point touch and free drive. ✔ Feature: LCD ✔ Size: 7. 0 inch (diagonal)driver ✔ Element: a-si TFT active matrix ✔ Display mode: normally White, transmissive high ✔ Resolution: 1152, 000 dots (800 x 3(rgb) x 480) ✔ SSD1963 touch panel controller Dot pitch: 0. 0642(W) x 0. 1790(H)mm. ✔ Ctive area: 154. 08(W)x 85. 92(H) module ✔ Size: 164. 9(W)x100. 0(H)x5. 7(D)mm surface ✔ Treatment: anti-glare ✔ Color arrangement: rgb-stripe ✔ Interface: digital ✔ Backlight: highlighted LED lamp backlighting ✔ TFT power(pin name: 3. 3V): The power of the screen is 2. 8-3. 3V; not use 5V, all the pin's voltage on the module can not be more than 3. 3V. ✔ Backlight power supply (pin name: 5V): backlight power range is 4. 5-7V. ✔ Interface Type: 16 parallel operating ✔Temperature: -20 70 degrees centigrade storage ✔Temperature: -30 80 degrees centigrade package includes: 1x 7inch HDMI LCD (B) 1x HDMI cable 1x USB Type A plug to Micro B plug cable 1x rpi screws Pack (4PCs) 1x protective case Features: ☺► Commande tactile capacitive ► La résolution de cet écran Raspberry Pi est de 1024 × 600. Elle comporte également une fonction de basculement vertical et horizontal. Image 4: Conversion du format d'affichage 3/16: 9 ☺► Tension de fonctionnement ► L'écran tactile 5V 1a exige le courant requis dans le régulateur 2a ci-dessus, un régulateur de suralimentation intégré 400mA CC-CC pour fournir une alimentation électrique au rétroéclairage de l'écran LCD ☺►Multifonctionnel ► lorsque l'écran tactile de 7 pouces fonctionne avec le Raspberry Pi, il prend en charge les lecteurs Raspbian, Ubuntu, Win10 IoT, à touche unique et libre. Lors de l'utilisation en tant qu'écran d'ordinateur, il prend en charge Windows 10 / 8. 1/8/7, tactile cinq points et lecteur libre ☺► avec étui de protection ► l'écran Raspberry Pi est fourni avec le support réglable pour l'étui de protection, fabriqué en acrylique noir. Un tableau Raspberry Pi peut être installé à l'arrière de l'étui Better► Meilleur service client ► Si vous avez besoin d'assistance technique, merci de nous le signaler, nous serons certainement responsables de tout problème ou vous pouvez vous adresser au contrôle qualité, il vous suffit de nous retourner pour un remboursement complet dans les 30 jours Product Details: Marque: ETEPON Numéro du modèle de l'article: EP711 Couleur: Blanc, Noir Type d'écran: LCD Taille de l'écran: 7 Pouces Resolution: 1080p Full HD Interface du matériel informatique: USB, HDMI Nombre de ports HDMI: 1 Type de connecteur: USB Type-A, HDMI Dimensions de l'article L x L x H: 18.8 x 12.7 x 1.9 centimètres Poids du produit: 499 Grammes Journées de manutention Nous expédierons toutes les commandes dans 1 jour ouvrable de paiement. Livraison Nous ne livrons pas en dehors de la France continentale. Politique de retour Tous les articles sont admissibles pour les retours dans les 60 jours suivant la réception. L'acheteur est responsable de l'expédition de retour sur n'importe quel article qui n'est pas endommagé. Évaluations Nous prenons notre réputation au sérieux, nous achetons et vendons en ligne, donc nous comprenons la valeur de la confiance. Si vous n'êtes pas satisfait de votre commande, veuillez nous contacter et nous travaillerons avec vous pour le résoudre à votre satisfaction.

- Wasserdichte Aluminiumlegierung Gaming Mouse Pad Pad Mousepad für Apple Neu 16.56 EUR Free shipping - Gaming-Mauspad aus Aluminiumlegierung, rutschfest, für Apple Macpp 15.49 EUR Free shipping - Mousepad Mauspad Gaming Office Pad Rutschfest Mouse Pad 800*300mm Schwarz 19.99 EUR Free shipping - Home Office Computer Ellenbogen Maus Pad Arm Rest Unterstützung Handgelenk DE 28.31 EUR Free shipping - Gaming Pad Mauspad XXL Anti-Rutsch Mousepad Pad (800 x 300 mm) PC Unterlage 13.79 EUR Free shipping - Mauspad Ergonomisches Handballenauflage Maus Pad Schwarz Mousepad GEL Silikon DE 8.69 EUR Free shipping - Gaming Mauspad XXL Anti-Rutsch Mousepad Schreibtisch Matte Gelände Kontur Design 13.89 EUR Free shipping - Mauspad mit Windows Tastenkombinationen I 30 x 80 cm I Mousepad in Standargröße. 15.09 EUR Free shipping - XL Europa Mauspad,Gaming Pad,70cm x 30cm Mousepad,Maus Pad,PC,Pad,Büro NEW 13.84 EUR Free shipping - Gel Handgelenkauflage Tastatur b'&' Maus Handballenauflage ergonomische Pad Set. 12.99 EUR Free shipping - Gel Handgelenkauflage Tastatur b'&' Maus Handballenauflage ergonomische Pad Set ! 12.99 EUR Free shipping - Large Size Mouse Pad Word/Excel/Power Point Shortcut Keys Desk Pad Mat Non 19.59 EUR Free shipping - - - - - - - - Product Description Große XL Gaming Mouse Pad Matte für PC Laptop Tastatur Anti-Slip 90 * 40cm Description: Product size: 900*400*2mm Anti-slip rubber base. Portable with cloth surface. Our products have STITCHED EDGES that prevents fraying or peeling of surface. Supports full-sized keyboard with more than enough room for mouse. The heavy rubber bottom prevents your mouse mat from ever moving when using it. Never have to worry about running of the edge again! Large surface is ideal for FPS games such as OW and TF2 Do a 360 degree turn without lifting up your mouse! WHAT ARE PROS OF PUTTING KEYBOARD ON A MOUSE MAT? It looks awesome. Especially with a mechanical keyboard. Prevents movement of keyboard when on mouse mat. Evens out an un-even surface providing a flat surface for your keyboard to sit on Package included:1x mouse mat - Zahlung - Versand - Rückkehr - Über uns Wir akzeptieren nur PayPal-Zahlung. Die gekaufte Waren muessen innerhalb von 4 Tage bezahlt werden. Artikel werden innerhalb von 2 Werktage über Brief/Warensendung versendet, nachdem volle Zahlung empfangen ist. Kunde sollte Einzelteil innerhalb 10-15 Werktage erhalten, nachdem Paket gesendet wurde. Fern aren benötigen 10-15 Arbeitstage. Mailen Sie uns, wenn Einzelteile nicht nach 20 Arbeitstagen nach voller Zahlung. Wir versenden nur zur anerkannten Adresse, die in Paypal oder -Adresse. Bitte stellen Sie sicher, Zahlungs adresse korrekt ist. Irgendwelche die nicht-empfangenen Einzelteile, die durch unzulässige Adresse verursacht wurden, registrierten sind nicht in unserer volle Rückerstattung- oder Wiedereinbauspolitik. Eine Mitteilungs-eMail der Abfertigung wird geschickt, nachdem Einzelteil bekannt. Bitte mailen Sie uns, wenn Sie unsere E-Mail nach 3 Tagen der vollen Zahlung gesendet empfangen. Sie haben das Recht, binnen vierzehn Tagen ohne Angabe von Gründen diesen Vertrag zu widerrufen. Die Widerrufsfrist beträgt vierzehn Tage ab dem Tag, an dem Sie oder ein von Ihnen benannter Dritter, der nicht der Beförderer ist, die Waren in Besitz genommen haben bzw. hat. Sie können dafür das beigefügte Muster-Widerrufsformular verwenden, das jedoch nicht vorgeschrieben ist. Zur Wahrung der Widerrufsfrist reicht es aus, dass Sie die Mitteilung über die Ausübung des Widerrufsrechts vor Ablauf der Widerrufsfrist absenden. Dieser Artikel hat 24 Monate Gewb'&'auml;hrleistung. Die Gewb'&'auml;hrleistung bezieht sich auf Herstellungs- und Materialfehler sowie andere Fehler, die bereits bei der Auslieferung vorliegen. Hierzu gehb'&'ouml;ren keine Schb'&'auml;den, die durch unsachgemb'&'auml;b'&'szlig;e Behandlung, vorsb'&'auml;tzliche oder fahrlb'&'auml;ssige Beschb'&'auml;digung, unsachgemb'&'auml;b'&'szlig;e Aufstellung bzw. Installation, Anschluss an falsche En savoir plus Collaboration commerciale.

- Gel Handgelenkauflage Tastatur b'&' Maus Handballenauflage ergonomische Pad Set. 12.86 EUR Free shipping - Ergonomische Handballenauflage für Maus Handgelenkauflage, Gelkissen für PC 12.86 EUR Free shipping - 80X30CM RGB Bunte LED Beleuchtung Gaming Matte Spiele XXL Mouse Pad 20.79 EUR Free shipping - Große Leder Computer Schreibtisch Matte Moderne Tastatur Mouse Pad 12.88 EUR Free shipping - 1 Stück Handgelenkauflage Maus Handballenauflage für Computer und Laptop 16.7 EUR Free shipping - Gaming-Mauspad aus Aluminiumlegierung, rutschfest, für Apple Macpp 14.69 EUR Free shipping - Gaming Mauspad XXL Anti-Rutsch Mousepad Schreibtisch Matte Gelände Kontur Design 15.39 EUR 1.99 EUR - Mauspad mit Windows Tastenkombinationen I 80 x 30 cm I Mousepad in 17.59 EUR Free shipping - Handgelenkauflage Tastatur b'&' Maus Handballenauflage ergonomische Pad 10.99 EUR Free shipping - Mauspad Ergonomisches Handballenauflage Maus Pad Schwarz Mousepad GEL Silikon DE 8.7 EUR Free shipping - Large Size Mouse Pad Word/Excel/Power Point Shortcut Keys Desk Pad Mat Non 18.91 EUR Free shipping - Excel Cheat Sheet Schreibtischmatte Excel Verknüpfungen Computer Desk Mat 14.59 EUR Free shipping - - - - - - - - Product Description Große XL Gaming Mouse Pad Matte für PC Laptop Tastatur Anti-Slip 90 * 40cm Description: Product size: 900*400*2mm Anti-slip rubber base. Portable with cloth surface. Our products have STITCHED EDGES that prevents fraying or peeling of surface. Supports full-sized keyboard with more than enough room for mouse. The heavy rubber bottom prevents your mouse mat from ever moving when using it. Never have to worry about running of the edge again! Large surface is ideal for FPS games such as OW and TF2 Do a 360 degree turn without lifting up your mouse! WHAT ARE PROS OF PUTTING KEYBOARD ON A MOUSE MAT? It looks awesome. Especially with a mechanical keyboard. Prevents movement of keyboard when on mouse mat. Evens out an un-even surface providing a flat surface for your keyboard to sit on Package included:1x mouse mat - Zahlung - Versand - Rückkehr - Über uns Wir akzeptieren nur PayPal-Zahlung. Die gekaufte Waren muessen innerhalb von 4 Tage bezahlt werden. Artikel werden innerhalb von 2 Werktage über Brief/Warensendung versendet, nachdem volle Zahlung empfangen ist. Kunde sollte Einzelteil innerhalb 10-15 Werktage erhalten, nachdem Paket gesendet wurde. Fern aren benötigen 10-15 Arbeitstage. Mailen Sie uns, wenn Einzelteile nicht nach 20 Arbeitstagen nach voller Zahlung. Wir versenden nur zur anerkannten Adresse, die in Paypal oder -Adresse. Bitte stellen Sie sicher, Zahlungs adresse korrekt ist. Irgendwelche die nicht-empfangenen Einzelteile, die durch unzulässige Adresse verursacht wurden, registrierten sind nicht in unserer volle Rückerstattung- oder Wiedereinbauspolitik. Eine Mitteilungs-eMail der Abfertigung wird geschickt, nachdem Einzelteil bekannt. Bitte mailen Sie uns, wenn Sie unsere E-Mail nach 3 Tagen der vollen Zahlung gesendet empfangen. Sie haben das Recht, binnen vierzehn Tagen ohne Angabe von Gründen diesen Vertrag zu widerrufen. Die Widerrufsfrist beträgt vierzehn Tage ab dem Tag, an dem Sie oder ein von Ihnen benannter Dritter, der nicht der Beförderer ist, die Waren in Besitz genommen haben bzw. hat. Sie können dafür das beigefügte Muster-Widerrufsformular verwenden, das jedoch nicht vorgeschrieben ist. Zur Wahrung der Widerrufsfrist reicht es aus, dass Sie die Mitteilung über die Ausübung des Widerrufsrechts vor Ablauf der Widerrufsfrist absenden. Dieser Artikel hat 24 Monate Gewb'&'auml;hrleistung. Die Gewb'&'auml;hrleistung bezieht sich auf Herstellungs- und Materialfehler sowie andere Fehler, die bereits bei der Auslieferung vorliegen. Hierzu gehb'&'ouml;ren keine Schb'&'auml;den, die durch unsachgemb'&'auml;b'&'szlig;e Behandlung, vorsb'&'auml;tzliche oder fahrlb'&'auml;ssige Beschb'&'auml;digung, unsachgemb'&'auml;b'&'szlig;e Aufstellung bzw. Installation, Anschluss an falsche Netzspannung, normalen Verschleib'&'szlig;, Nichtbeachte En savoir plus Collaboration commerciale.

- Mauspad Ergonomisches Handballenauflage Maus Pad Schwarz Mousepad GEL Silikon DE 8.11 EUR Free shipping - Gel Handgelenkauflage Tastatur b'&' Maus Handballenauflage ergonomische Pad Set 12.33 EUR Free shipping - Gaming-Mauspad – Großes Tastaturpad 80 x 30 cm (31,5 x 11,8 Zoll), Schwarz-weiß 17.89 EUR Free shipping - Gaming Mauspad aus Aluminiumlegierung rutschfest für Apple Macpp 14.79 EUR Free shipping - Gaming-Mauspad aus Aluminiumlegierung rutschfest für Apple Macpp 14.79 EUR Free shipping - 15,7 Zoll süße Otter gefüllte Desktop Samt Plüsch Handgelenk Pad 40 cm 19.23 EUR Free shipping - Gaming Mauspad XXL Anti-Rutsch Mousepad Schreibtisch Matte Gelände Kontur Design 15.89 EUR Free shipping - Handballenauflage Set Tastatur Mauspad Keyboard ergonomisch Auflage PC Notebook 16.29 EUR Free shipping - Ergonomische Handballenauflage für Maus Handgelenkauflage, Gelkissen für PC 12.43 EUR Free shipping - 15,7 Zoll süße Otter gefüllte Desktop Samt Plüsch Handgelenk Pad 40 cm 19.23 EUR Free shipping - Gaming Mauspad aus Aluminiumlegierung rutschfest für Apple Macpp 14.79 EUR Free shipping - Gel Handgelenkauflage Tastatur b'&' Maus Handballenauflage ergonomische Pad Set ! 14.79 EUR Free shipping - - - - - - - - Product Description Große XL Gaming Mouse Pad Matte für PC Laptop Tastatur Anti-Slip 90 * 40cm Description: Product size: 900*400*2mm Anti-slip rubber base. Portable with cloth surface. Our products have STITCHED EDGES that prevents fraying or peeling of surface. Supports full-sized keyboard with more than enough room for mouse. The heavy rubber bottom prevents your mouse mat from ever moving when using it. Never have to worry about running of the edge again! Large surface is ideal for FPS games such as OW and TF2 Do a 360 degree turn without lifting up your mouse! WHAT ARE PROS OF PUTTING KEYBOARD ON A MOUSE MAT? It looks awesome. Especially with a mechanical keyboard. Prevents movement of keyboard when on mouse mat. Evens out an un-even surface providing a flat surface for your keyboard to sit on Package included:1x mouse mat - Zahlung - Versand - Rückkehr - Über uns Wir akzeptieren nur PayPal-Zahlung. Die gekaufte Waren muessen innerhalb von 4 Tage bezahlt werden. Artikel werden innerhalb von 2 Werktage über Brief/Warensendung versendet, nachdem volle Zahlung empfangen ist. Kunde sollte Einzelteil innerhalb 10-15 Werktage erhalten, nachdem Paket gesendet wurde. Fern aren benötigen 10-15 Arbeitstage. Mailen Sie uns, wenn Einzelteile nicht nach 20 Arbeitstagen nach voller Zahlung. Wir versenden nur zur anerkannten Adresse, die in Paypal oder -Adresse. Bitte stellen Sie sicher, Zahlungs adresse korrekt ist. Irgendwelche die nicht-empfangenen Einzelteile, die durch unzulässige Adresse verursacht wurden, registrierten sind nicht in unserer volle Rückerstattung- oder Wiedereinbauspolitik. Eine Mitteilungs-eMail der Abfertigung wird geschickt, nachdem Einzelteil bekannt. Bitte mailen Sie uns, wenn Sie unsere E-Mail nach 3 Tagen der vollen Zahlung gesendet empfangen. Sie haben das Recht, binnen vierzehn Tagen ohne Angabe von Gründen diesen Vertrag zu widerrufen. Die Widerrufsfrist beträgt vierzehn Tage ab dem Tag, an dem Sie oder ein von Ihnen benannter Dritter, der nicht der Beförderer ist, die Waren in Besitz genommen haben bzw. hat. Sie können dafür das beigefügte Muster-Widerrufsformular verwenden, das jedoch nicht vorgeschrieben ist. Zur Wahrung der Widerrufsfrist reicht es aus, dass Sie die Mitteilung über die Ausübung des Widerrufsrechts vor Ablauf der Widerrufsfrist absenden. Dieser Artikel hat 24 Monate Gewb'&'auml;hrleistung. Die Gewb'&'auml;hrleistung bezieht sich auf Herstellungs- und Materialfehler sowie andere Fehler, die bereits bei der Auslieferung vorliegen. Hierzu gehb'&'ouml;ren keine Schb'&'auml;den, die durch unsachgemb'&'auml;b'&'szlig;e Behandlung, vorsb'&'auml;tzliche oder fahrlb'&'auml;ssige Beschb'&'auml;digung, unsachgemb'&'auml;b'&'szlig;e Aufstellung bzw. Installation, Anschluss an falsche Netzspannung, normalen Verschlei En savoir plus Collaboration commerciale.

Wondershare UniConverter 12.5 Last version 2021 Wondershare UniConverter Convert multimedia: Wondershare UniConverter (old name is Wondershare Video Converter Ultimate) which allows you to convert the video format. You can cut, splice, move, or add effects, subtitles a easy way. When using software you easily cut, splice, move, as well as add the effects, the subtitles to the video.... Or can switch the clods SD, HD video to any format popular for use with iPod (Classic, Nano and Touch), iPhone, Apple TV, Zune, PSP, Pocket PC... Wondershare UniConverter helps convert formats powerful video and support downloads, compress, edit, burn videos in 1000 different formats. Wondershare UniConverter very easy to use, make your videos stand out You can customize the family drama through the editing features improve and get the works professional in a few minutes.

Lot of 2 Vaio netbooks. The first is in good condition, has a 64GB SSD and is in working order. The only issue I found was that the battery caused the system to freeze occasionally when using the 3G card (so WWAN has been disabled). The second has no SSD, and the screen has a large dark spot. No further testing was done. Comes with a generic 10.5V adapter (needs a figure 8 cable). Both have a single core Atom, which is not a performance CPU, but it's OK for casual web browsing and the VPCX is lightweight at around 750 grams (including the battery). Please take a good look at the photos. The specs for each are: 1) VPCX118KJ     Intel Atom Z540 CPU @ 1.86GHz     2GB DDR2 RAM     11.1" anti-glare screen, 1366x768 resolution     Intel GMA500 graphics     64GB Sandisk pSSD (I've reformatted the SSD and installed the Sony drivers)     WiFi (no WWAN)     Windows 7 Home Premium SP1 32-bit     Japanese extended keyboard     Replacement 4 cell battery, very little wear 2) VPCX118KJ     Intel Atom Z540 CPU @ 1.86GHz     2GB DDR2 RAM     11.1" anti-glare screen, 1366x768 resolution     Intel GMA500 graphics     NO SSD     Windows 7 Home Premium SP1 32-bit     Japanese extended keyboard     NO BATTERY Insured shipping from France. If you do have any questions then please drop me a line. [Traduit par google] Lot de 2 miniportables Vaio. Le premier est en bon état, dispose d'un SSD de 64 Go et est en état de marche. Le seul problème que j'ai trouvé était que la batterie provoquait parfois le gel du système lors de l'utilisation de la carte 3G (donc WWAN a été désactivé). Le second n'a pas de SSD et l'écran présente une grande tache sombre. Aucun autre test n'a été effectué. Livré avec un adaptateur 10,5 V générique (nécessite un câble C7). Les deux ont un Atom monocoeur, qui n'est pas un processeur performant, mais il convient à la navigation web occasionnelle et le VPCX est léger à environ 750 grammes (y compris la batterie). Veuillez bien regarder tous les photos. Les spécifications pour chacun sont: 1) VPCX118KJ     Processeur Intel Atom Z540 à 1,86 GHz     2 Go DDR2 RAM     Écran antireflet de 11,1 po., résolution 1366 x 768     Graphiques Intel GMA500     pSSD Sandisk 64 Go (J'ai reformaté les SSD et installé les pilotes Sony)     WiFi (pas de WWAN)     Windows 7 Home Premium SP1 32 bit     Clavier étendu japonais     Batterie de remplacement 4 cellules, très peu d'usure 2) VPCX118KJ     Processeur Intel Atom Z540 à 1,86 GHz     2 Go DDR2 RAM     Écran antireflet de 11,1 po., résolution 1366 x 768     Graphiques Intel GMA500     PAS DE SSD     Windows 7 Home Premium SP1 32 bit     Clavier étendu japonais     PAS DE BATTERIE Envoi assuré depuis La France. Merci de demander si vous avez des questions.

Testée fonctionnelle. En excellent état. Le meilleur des deux mondes..avec à la fois 6x SATA (sympa pour un petit NAS) et de l'IDE. A la fois du PCIexpress et PCI classique. VGA/DVI et HDMI. Sortie audio fournie + optique. Livrée avec l'IOShiled et 4 câbles SATA Comprends donc: - La carte mère MicroATX GA-H55MA-S2H - Un processeur Intel Core I3-540 à 3,07Ghz avec le ventirad d'origine - Une barrette de 2Go de RAM DDR3 DIMM Kingston (encore un slot disponible) - IOSHIELD / Backplate + 4 Câbles SATA (possible d'en joindre plus, dans ce cas contactez moi avant) - Processeur 1. Support for an Intel® Core™ i7 series processor/Intel® Core™ i5 series processor/ Intel® Core™ i3 series processor in the LGA1156 package (Go to GIGABYTE's website for the latest CPU support list.) 2. L3 cache varies with CPU - Chipset 1. Intel® H55 Express Chipset - Mémoire 1. 2 x 1.5V DDR3 DIMM sockets supporting up to 8 GB of system memory (Note 1) 2. Dual channel memory architecture 3. Support for DDR3 2200+/1800/1600/1333/1066/800 MHz memory modules 4. Support for non-ECC memory modules 5. Support for Extreme Memory Profile (XMP) memory modules * To reach DDR3 2200 MHz and above, you are required to use with Intel Core i7/Core i5 CPU without HD Graphics and install a discrete graphics card. When using Intel Core i5/Core i3/ Pentium CPU with HD Graphics, the maximum memory speed supported is 1666 MHz * Go to GIGABYTE's website for the latest memory support list. - Carte Graphique Intégrée Integrated in the Chipset: 1. 1 x D-Sub port (Note 2) 2. 1 x DVI-D port (Note 2) (Note 3) (Note 4) 3. 1 x HDMI port(Note 2) (Note 4) - Audio 1. Realtek ALC888B codec 2. High Definition Audio 3. 2/4/5.1/7.1-channel 4. Support for S/PDIF In/Out 5. Support for CD In - Réseau 1. 1 x RTL8111D chip (10/100/1000 Mbit) - Port d'expansion 1. 1 x PCI Express x16 slot, running at x16 (PCIEX16) (Note 5) (The PCIEX16 slot conforms to PCI Express 2.0 standard.) 2. 1 x PCI Express x16 slot, running at x4 (PCIEX4) (Note 6) 3. 2 x PCI slots - Technologie Multi-cartes graphiques 1. Support for ATI CrossFireX™ technology(Note 6) - Interface de Stockage Chipset: 1. 6 x SATA 3Gb/s connectors supporting up to 6 SATA 3Gb/s devices JMicron JMB368 chip: 1. 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices iTE IT8720 chip: 1. 1 x floppy disk drive connector supporting up to 1 floppy disk drive - USB Chipset: 1. Integrated in the Chipset 2. Up to 12 USB 2.0/1.1 ports (8 on the back panel, 4 via the USB brackets connected to the internal USB headers) - Connecteurs d'entrées/sorties internes 1. 1 x 24-pin ATX main power connector Connectors 2. 1 x 4-pin ATX 12V power connector 3. 1 x floppy disk drive connector 4. 1 x IDE connector 5. 6 x SATA 3Gb/s connectors 6. 1 x CPU fan header 7. 1 x system fan header 8. 1 x front panel header 9. 1 x front panel audio header 10. 1 x CD In connector 11. 1 x S/PDIF In header 12. 1 x S/PDIF Out header 13. 2 x USB 2.0/1.1 headers 14. 1 x serial port header 15. 1 x clearing CMOS jumper - Connecteur du Panneau Arrière 1. 1 x PS/2 keyboard or PS/2 mouse port 2. 1 x D-Sub port (Note 2) 3. 1 x DVI-D port (Note 2) (Note 3) (Note 4) 4. 1 x HDMI port (Note 2) (Note 4) 5. 1 x optical S/PDIF Out connector 6. 8 x USB 2.0/1.1 ports 7. 1 x RJ-45 port 8. 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/ Side Speaker Out/Line In/Line Out/Microphone) - Contrôleur d'Entrée/Sortie 1. iTE IT8720 chip - Monitorage Matériel 1. Sys

Carte mère Gigabyte GA-A320M-H Très bon état - Livré dans sa boîte avec manuels, câble SATA + plaque arrière de ventirad Élément manquant: backplate / IO shield Pile CMOS OK - Bios Version F57 - 22 Mars 2024 (détails voir photos) - Processeur 1. AM4 Socket: Supports AMD 5000 Series/ 5000 G-Series/ 4000 G-Series/ 3rd Gen Ryzen™/ 2nd Gen Ryzen™/ 1st Gen Ryzen™/ 2nd Gen Ryzen™ with Radeon™ Vega Graphics/ 1st Gen Ryzen™ with Radeon™ Vega Graphics/ Athlon™ with Radeon™ Vega Graphics/ 7th Gen A-series/ Athlon X4 Processors (Please refer b'"'CPU Support Listb'"' for more information.) - Chipset 1. AMD A320 - Mémoire 1. 2 x DDR4 DIMM sockets supporting up to 64 GB (32 GB single DIMM capacity) of system memory 2. Dual channel memory architecture 3. Support for DDR4 3200(O.C.)/2933(O.C.)/2667*/2400/2133 MHz memory modules * Actual support may vary by CPU. 4. Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode) 5. Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules 6. Support for Extreme Memory Profile (XMP) memory modules (Please refer b'"'Memory Support Listb'"' for more information.) - Carte Graphique Intégrée Integrated Graphics Processor: 1. 1 x DVI-D port, supporting a maximum resolution of 1920x1200@60 Hz * The DVI-D port does not support D-Sub connection by adapter. 2. 1 x HDMI port, supporting a maximum resolution of 4096x2160@24 Hz * Support for HDMI 1.4 version. Maximum shared memory of 2 GB * Actual support may vary by CPU. - Audio 1. Realtek® audio codec 2. High Definition Audio 3. 2/4/5.1/7.1-channel * To configure 7.1-channel audio, you need to open the audio software and select Device advanced settings b'>' Playback Device to change the default setting first. Please visit GIGABYTE's website for details on configuring the audio software. 4. Support for S/PDIF Out - Réseau 1. Realtek® GbE LAN chip (10/100/1000 Mbit) - Port d'expansion 1. 1 x PCI Express x16 slot, running at x16 (PCIEX16)* * Actual support may vary by CPU. (The PCIEX16 slot conforms to PCI Express 3.0 standard.) 2. 2 x PCI Express x1 slots (The PCI Express x1 slots conform to PCI Express 2.0 standard.) - Interface de Stockage 1. 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280/22110 SATA and PCIe x4/x2(Note) SSD support) * Actual support may vary by CPU. 2. 4 x SATA 6Gb/s connectors 3. Support for RAID 0, RAID 1, and RAID 10 * Refer to b'"'1-7 Internal Connectors,b'"' for the installation notices for the M.2 connector. (Note) Supports only M.2 SATA SSDs when using an AMD Athlon™-series/ 7th Gen. A-series or Athlon™ X4 APU. - USB Chipset: 1. 2 x USB 3.1 Gen 1 ports available through the internal USB header 2. 6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through the internal USB headers) CPU: 1. 4 x USB 3.1 Gen 1 ports on the back panel - Connecteurs d'entrées/sorties internes 1. 1 x 24-pin ATX main power connector 2. 1 x 8-pin ATX 12V power connector 3. 1 x CPU fan header 4. 1 x system fan header 5. 1 x M.2 Socket 3 connector 6. 4 x SATA 6Gb/s connectors 7. 1 x front panel header 8. 1 x front panel audio header 9. 1 x S/PDIF Out header 10. 1 x USB 3.1 Gen 1 header 11. 2 x USB 2.0/1.1 headers 12. 1 x Trusted Platform Module (TPM) header (2x10 pin, for the GC-TPM2.0 module only) 13. 1 x speaker header 14. 1 x Clear CMOS jumper 15. 1 x chassis intrusion header - Connecteur du Panneau Arrière 1. 1 x PS/2 keyboard port 2. 1 x PS/2 mouse port 3. 1 x DVI-D port 4. 1 x HDMI port 5. 4 x USB 3.1 Gen 1 ports 6. 2 x USB 2.0/1.1 ports 7. 1 x RJ-45 port 8. 3 x audio jacks (Line In, Line Out, Mic In) - Contrôleur d'Entrée/Sortie 1. iTE® I/O Controller Chip - Monitorage Matériel 1. Voltage detection 2. Temperature detection 3. Fan speed detection 4. Overheating warning 5. Fan fail warning 6. Fan speed control: Whether the fan speed control function is supported will depend on the cooler you install En savoir plus

Asus Z9PE D8 WS + 2 XEON 2660 V2 40 CORE + 64GB GSKILL 1600MHZ No IO SHIELD Motherboard: https://event.asus.com/server/2012/z9pe-d8-ws/ Specs: CPU Dual Intel® Socket 2011 for Xeon® processor E5-2600 product family Supports Intel® Turbo Boost Technology 2.0 *Refer to www.asus.com for CPU support list Chipset Intel® C602 Express Chipset Memory 8 x DIMM, Max. 256GB DDR3 1600/1333/1066/800 MHz, Registered Memory; Max. 64GB, DDR3 1600/1333/1066 MHz, ECC, Non-ECC, un-buffered Memory Quad channel memory architecture *Refer to www.asus.com for the memory QVL (Qualified Vendors Lists). Expansion Slots 4 x PCIe 3.0 x16 slots (Dual@x16/x16; Quad@x8/x8/x8/x8) 2 x PCIe 3.0 x16 slots (@x16 speed); 1 x PCIe 3.0 x16 slot (@x8 speed) *This motherboard is ready to support PCIe 3.0 SPEC. Functions will be available when using PCIe 3.0-compliant devices. Please refer to www.asus.com for updated details. Multi-GPU support Supports NVIDIA® 4-Way SLI™ Technology Supports AMD® Quad-GPU CrossFireX™ Technology Storage Intel® C602 Chipset: - 2 x SATA 6Gb/s ports with RAID 0,1,5 and 10 support (for Windows only) (AHCI) - 4 x SATA 3Gb/s ports with RAID 0,1,5 and 10 support (for Windows only) (AHCI) - 4 x SATA 3Gb/s ports with RAID 0,1,5 and 10 support (for Windows only) (SCU) Marvell® 9230 SATA controller: - 4 x SATA 6Gb/s ports (RAID 0, 1, 10 for Windows only) LAN 2 x Intel® 82574L Gigabit LAN controller USB ASMedia USB 3.0 controllers: - 2 x USB 3.0/2.0 ports at mid-board for front panel support - 2 x USB 3.0/2.0 ports at back panel Intel®C602 Chipset - 12 x USB 2.0/1.1 ports (6 ports at mid-board, 6 ports at back panel) Form Factor EEB Form Factor, 12”x 13” En savoir plus Collaboration commerciale.

When you purchase the product is sent as a message within 5 minutes Download link only, nothing physical will be sent A handy application for those who found a favorite music video or trailer of a new movie and wants to keep it on their computer for viewing offline. Or you need to download a video lesson/tutorial. Our video downloader is an ideal solution for this kind of task. Using our program you can simply download an entire YouTube playlist or channel at once and watch it whenever and wherever you want. Features Playlists and channels: The program supports downloading of all videos of a playlist or a channel. And thereis also an option to track the selected channel or playlist and download new clips as they are uploaded. Add to iTunes: You can configure the program to automatically add downloaded movies to your iTunes library. You can also pick a playlist where the downloaded video should be added. HQ, HD, 4K, or 8K: The program supports all available resolutions, be that 720p, 1080p, 4K, or 8K. The choice is up to you. Unlike online video downloaders, the app downloads any resolution with audio. Monitor the clipboard: The program keeps an eye on the clipboard and as soon as it spots a supported link there, it automatically adds this video into the download queue. Quality of the original: You can choose to save videos in the original quality (usually in MP4 format), without any modifications. In this case, the clip you get is exactly the same as the one its author uploaded. Simple tag editor: The app automatically detects the artist and the title of a video and saves them to the downloaded file. And you can easily change them later. Not just YouTube: The program supports Vevo.com, Vimeo, Dailymotion, Facebook, UOL, VKontakte, SoundCloud, TikTok, and a lot of other sites. So you can download videos from these websites as easily as you do from YouTube. Drag & Drop: The app features 100% drag&drop support. Just drag the link to a video with your mouse and drop it to the main window of the program, or to its dock icon on Mac. Multi-language interface: The app is translated into Arabic, Armenian, Azerbaijani, Bulgarian, Catalan, Chinese (Taiwan), Croatian, Czech, Danish, Dutch, English, Esperanto, French, German, Greek, Hebrew (Israel), Hungarian, Indonesian, Italian, Japanese, Korean, Latvian, Lithuanian, Malay, Norwegian Bokmål, Polish, Portuguese, Portuguese (Brazil), Romanian, Russian, Spanish, Swedish, Turkish, Vietnamese. System Requirements Internet connection Windows 10, Windows 8, Windows 7, Windows Vista, Windows 2003, Windows XP for PC systems (32bit/64bit) macOS 10.14 (Mojave), macOS 10.13 (High Sierra), macOS 10.12 (Sierra), OS X 10.11 (El Capitan), OS X 10.10 (Yosemite), OS X 10.9 (Mavericks), OS X 10.8 (Mountain Lion), Mac OS X 10.7 (Lion), Mac OS X 10.6 (Snow Leopard) Ubuntu Linux 14.04+ About 70 Mb of free hard drive space

DaVinci Resolve Studio 16.2 + Fusion Studio ☑ Pre-Activated ☑ LifeTime License Description PLEASE NOTE BEFORE MAKING A PURCHASE NO PHYSICAL ITEM WILL BE SENT. THIS IS A DIGITAL PURCHASE. A DOWNLOAD LINK WILL BE SENT TO YOU WHICH WILL INCLUDE THE CONTENTS OF YOUR PURCHASE. DaVinci Resolve 16 is the first software product in the world with 8K support, which allows you to professionally perform video editing and color correction, reduce the audio track and add visual effects. For instant transition between different pages just one click of the mouse. In addition, DaVinci Resolve 16 Studio is the only application with collective creative tools so that editors, colorists, VFX specialists and sound engineers can simultaneously solve their problems within the framework of one project. DaVinci Resolve sets new standards for high-quality post-processing of material, therefore this system is used more often than any other when creating full-length feature films, television series and commercials. New Features: DaVinci Resolve 16 contains a Cut page that speeds up installation when performing tasks in tight deadlines. The DaVinci Neural Engine uses machine learning algorithms to work with Speed ​​Warp and face recognition. It’s easy to apply filters and color schemes to clips of one tier, and for projects quick export from the application to services such as YouTube and Vimeo is provided. Special on-screen indicators with GPU acceleration provide even more options for checking the technical characteristics of the image. Additionally, Fusion effects overlay has been optimized and three-dimensional sound support has been added to the Fairlight block. As a result of the update, the system received hundreds of tools added based on the feedback received. Cut Page The Cut page is designed to work on short-cycle material such as commercials or news releases. Here, a whole set of innovative tools is concentrated for significant installation optimization. With their help, you can import and fit, add transitions and text, automatically align the color and reduce the audio track. Such functionality provides quick preparation of content for display on television and services such as YouTube. In addition, if necessary, you can always switch to the usual tools of the Edit section even in the middle of the current project. Overview of installation tools at DaVinci Resolve: DaVinci Resolve has a complete set of professional tools for interactive and offline editing of feature films, series and commercials. A high-performance playback platform provides editing and quick fitting of material even when working with resource-intensive formats such as H.264 and RAW. • Custom timeline settings. Ability to create timelines with different parameters of frame rate and resolution, monitoring and output settings within the same project. • Modify clips Ability to apply blending, transformation, ResolveFX plug-ins and color schemes to clips that are in the same tier of the timeline. • Face Recognition The new DaVinci Neural Engine platform allows you to automatically collect clips into one folder based on the presence of human faces in the frame. • Precise transition to the desired audio fragment Exceptionally accurate change in playback speed and frame rate conversion using the DaVinci Neural Engine platform. • Image stabilization function Analysis of frames and their stabilization on the Edit page using tools for fixing the camera, zooming and anti-aliasing with different intensities. • Editing keyframes using curves Faster creation of animation effects using special tools and editing keyframes for ResolveFX and OpenFX plugins. • Effect of Speed ​​Warp The ability to search for the desired fragment and tone correction for understanding speech during a step-by-step transition. • More efficient coding. Processing only modified frames instead of re-encoding the entire file significantly reduces rendering time. • Integr

Détails techniques CARACTÉRISTIQUES Type: Original Couleur: Non Technologie d'impression: Impression à jet d'encre Compatibilité: HP OfficeJet 4500, J4580, J4660 Couleurs d'impression: Noir Taille de la tête d'impression: 1,42 cm (0.56") Durée de vie en stockage: 1.5 année(s) Quantité par boîte: 1 pièce(s) Couleur(s) des cartouches d'impression: Noir Type de cartouche d'encre: Rendement élevé (XL) Compatibilité de marque: HP Code OEM: 901XL Type d'encre: Encre à pigments Volume d'encre noire: 14 ml Rendement par page de l'encre noire: 700 pages Quantité de cartouches d'encre noire: 1 Segment HP: Professionnel, Entreprise CONDITIONS ENVIRONNEMENTALES Taux d'humidité de fonctionnement: 20 - 80% Température hors fonctionnement: -40 - 60 °C Température d'opération: 15 - 32 °C Taux d'humidité relative (stockage): 20 - 80% AUTRES CARACTÉRISTIQUES Embouts de tête d'impression: 336 Poids du carton principal: 4,63 kg Dimensions de la palette (L x P x H): 1200 x 800 x 1144 mm Dimensions du colis (LxPxH): 116 x 36 x 115 mm Types d'encres compatibles: Pigment-based Dimensions du carton principal (LxPxH): 23,62 x 6,42 x 9,84 mm Capacité du carton principal: 60 pièce(s) Taille (impériale): 11,6 cm (4.57") Goutte d'encre: 13.8 pl Volume de cartouche d'impression (métrique): 14 ml Caractéristiques: Get quick and easy cartridge loading – cartridge technology verifies when you're using Original HP. Finish a critical job when you're low on ink – printing is completed with remaining colour or black cartridge. Print affordable laser-quality black text and graphics, using HP Officejet inks. Get 3 times more black printed pages and a better value, using high-capacity ink cartridges*. Enhance the quality of your documents using papers with the ColorLok symbol. Code UNSPSC: 44103105 Dimensions de la palette européenne (L x P x H): 1200 x 800 x 1144 mm Poids par palette: 191,8 kg (422.9 kg) Dimensions de la palette (L x P x H): 1199,9 x 800,1 x 1144 mm (47.2 x 31.5 x 45") Dimensions de l'emballage (L x P x H): 116,1 x 36,1 x 115,1 mm (4.57 x 1.42 x 4.53") Poids (impérial): 0,0499 kg (0.11 kg) Poids du carton/paquet: 0,0726 kg (0.16 kg) Vente au détail uniquement: N POIDS ET DIMENSIONS Poids: 50 g Poids du paquet: 70 g Hauteur: 115 mm Largeur: 116 mm Profondeur: 36 mm Profondeur du colis: 36 mm Hauteur du colis: 115 mm Largeur du colis: 116 mm DONNÉES LOGISTIQUES Quantité par palette: 2160 pièce(s) Nombre de cartons par palette: 36 Nombre de couches par palette: 9 Poids de la palette: 191,8 kg Référence produit 02101784

Détails techniques CARACTÉRISTIQUES Type: Original Couleur: Non Technologie d'impression: Impression à jet d'encre Compatibilité: HP DeskJet 3522, 3524 / HP Photosmart 5510, 5514, 5515, 5520, 5522, 5524, 6510, 6520, 7510, 7520, B010a, B109a, B109d, B109f, B109n, B110a, B110c, B110e, B209a, B209c, B210a, B210c, B210d, B8550, C309a, C309g, C310a, C410b, C510a, C5324, C5380, C5390, C6324, C6380, D5460, c309n Couleurs d'impression: Noir Taille de la tête d'impression: 1,43 cm (0.562") Durée de vie en stockage: 1.5 année(s) Quantité par boîte: 1 pièce(s) Couleur(s) des cartouches d'impression: Noir Type de cartouche d'encre: Rendement standard Compatibilité de marque: HP Code OEM: CB316EE Quantité: 1 pièce(s) Type d'encre: Encre à pigments Rendement par page de l'encre noire: 250 pages Quantité de cartouches d'encre noire: 1 Segment HP: Moyenne entreprise CONDITIONS ENVIRONNEMENTALES Taux d'humidité de fonctionnement: 5 - 80% Température hors fonctionnement: -40 - 70 °C Température d'opération: 5 - 50 °C Taux d'humidité relative (stockage): 5 - 80% Température d'opération: 41 - 104 °F AUTRES CARACTÉRISTIQUES Embouts de tête d'impression: 720 Poids du carton principal: 2,63 kg Dimensions de la palette (L x P x H): 1200 x 800 x 942 mm Dimensions du colis (LxPxH): 107 x 24 x 115 mm Types d'encres compatibles: Pigment-based Dimensions du carton principal (LxPxH): 21,77 x 8,94 x 5,24 mm Capacité du carton principal: 45 pièce(s) Taille (impériale): 10,7 cm (4.21") Poids à vide: 21 g Goutte d'encre: 14 pl Nombre de feuilles de support par boîte: 200 feuilles Volume de cartouche d'impression (métrique): 6 ml Caractéristiques: Get quick and easy cartridge loading - a unique colour and fit ensure the right colour ink is in the right place. Enhance document quality by using papers with the ColorLok logo. Bolder blacks improve contrast and sharpen text. Documents dry faster for less smearing when handled. Print enduring documents with laser-quality text and sharp edges around graphics, using HP Photosmart inks. Get documents with outstanding quality and rich greyscale graphics. Enjoy affordable individual inks — replace each cartridge separately when it's needed. Archive documents that maintain text quality for decades without fading using Original HP inks*. Count on HP ink and paper to ensure stored legal documents, awards and photos maintain their image quality for years to come. Code UNSPSC: 44103105 Dimensions de la palette européenne (L x P x H): 1200 x 800 x 942 mm Poids par palette: 135,5 kg (298.6 kg) Dimensions de la palette (L x P x H): 1199,9 x 800,1 x 942,1 mm (47.2 x 31.5 x 37.1") Dimensions de l'emballage (L x P x H): 106,9 x 23,9 x 115,1 mm (4.21 x 0.94 x 4.53") Poids (impérial): 0,0363 kg (0.0800 kg) Poids du carton/paquet: 0,0499 kg (0.11 kg) Vente au détail uniquement: N POIDS ET DIMENSIONS Poids: 30 g Poids du paquet: 50 g Hauteur: 115 mm Largeur: 107 mm Profondeur: 24 mm Profondeur du colis: 24 mm Hauteur du colis: 115 mm Largeur du colis: 107 mm DONNÉES LOGISTIQUES Quantité par palette: 1890 pièce(s) Nombre de cartons par palette: 42 Nombre de couches par palette: 6 Poids de la palette: 135,5 kg Référence produit 02101766

Détails techniques CARACTÉRISTIQUES Type: Original Couleur: Non Technologie d'impression: Impression à jet d'encre Compatibilité: HP DeskJet 3522, 3524 / HP Photosmart 5510, 5514, 5515, 5520, 5522, 5524, 6510, 6520, 7510, 7520, B010a, B109a, B109d, B109f, B109n, B110a, B110c, B110e, B209a, B209c, B210a, B210c, B210d, B8550, C309a, C309g, C310a, C410b, C510a, C5324, C5380, C5390, C6324, C6380, D5460, c309n Couleurs d'impression: Noir Taille de la tête d'impression: 1,43 cm (0.562") Durée de vie en stockage: 1.5 année(s) Quantité par boîte: 1 pièce(s) Couleur(s) des cartouches d'impression: Noir Type de cartouche d'encre: Rendement standard Compatibilité de marque: HP Code OEM: CB316EE Quantité: 1 pièce(s) Type d'encre: Encre à pigments Rendement par page de l'encre noire: 250 pages Quantité de cartouches d'encre noire: 1 Segment HP: Moyenne entreprise CONDITIONS ENVIRONNEMENTALES Taux d'humidité de fonctionnement: 5 - 80% Température hors fonctionnement: -40 - 70 °C Température d'opération: 5 - 50 °C Taux d'humidité relative (stockage): 5 - 80% Température d'opération: 41 - 104 °F AUTRES CARACTÉRISTIQUES Embouts de tête d'impression: 720 Poids du carton principal: 2,63 kg Dimensions de la palette (L x P x H): 1200 x 800 x 942 mm Dimensions du colis (LxPxH): 107 x 24 x 115 mm Types d'encres compatibles: Pigment-based Dimensions du carton principal (LxPxH): 21,77 x 8,94 x 5,24 mm Capacité du carton principal: 45 pièce(s) Taille (impériale): 10,7 cm (4.21") Poids à vide: 21 g Goutte d'encre: 14 pl Nombre de feuilles de support par boîte: 200 feuilles Volume de cartouche d'impression (métrique): 6 ml Caractéristiques: Get quick and easy cartridge loading - a unique colour and fit ensure the right colour ink is in the right place. Enhance document quality by using papers with the ColorLok logo. Bolder blacks improve contrast and sharpen text. Documents dry faster for less smearing when handled. Print enduring documents with laser-quality text and sharp edges around graphics, using HP Photosmart inks. Get documents with outstanding quality and rich greyscale graphics. Enjoy affordable individual inks — replace each cartridge separately when it's needed. Archive documents that maintain text quality for decades without fading using Original HP inks*. Count on HP ink and paper to ensure stored legal documents, awards and photos maintain their image quality for years to come. Code UNSPSC: 44103105 Dimensions de la palette européenne (L x P x H): 1200 x 800 x 942 mm Poids par palette: 135,5 kg (298.6 kg) Dimensions de la palette (L x P x H): 1199,9 x 800,1 x 942,1 mm (47.2 x 31.5 x 37.1") Dimensions de l'emballage (L x P x H): 106,9 x 23,9 x 115,1 mm (4.21 x 0.94 x 4.53") Poids (impérial): 0,0363 kg (0.0800 kg) Poids du carton/paquet: 0,0499 kg (0.11 kg) Vente au détail uniquement: N POIDS ET DIMENSIONS Poids: 30 g Poids du paquet: 50 g Hauteur: 115 mm Largeur: 107 mm Profondeur: 24 mm Profondeur du colis: 24 mm Hauteur du colis: 115 mm Largeur du colis: 107 mm DONNÉES LOGISTIQUES Quantité par palette: 1890 pièce(s) Nombre de cartons par palette: 42 Nombre de couches par palette: 6 Poids de la palette: 135,5 kg Référence produit 02104111