Wipe windows check

Thanks for clicking on my listing.  if you want to Buy Key Windows 10 PRO Online Activation With Instant  Email Delivery, check my store link bellow: BUY IT NOW ONLY (3€): ???? OrgKeys.com ????   PROMO CODE (-20%): ebay21   PLEASE USE THIS LINK TO PURCHASE THE KEY YOU WILL RECEIVE IT WITHIN 2 MINUTES

There is a promo code for the first 100 persons ! HURRY UP  PROMO CODE: EBAY15   Get 15% Off To Order Click Here: 01keys.com Find any Licence key you want with us ! (even if not listed you can email us) Many people buy from others and got scammed ! Save our store for future purchases when you need it contact us for any issues in store support We accept only paypal in payments we send the key after 5 minutes of verification of payment Check also your spam

l'écran a des défauts: ligne verticale rouge au milieu et 2 taches, plasturgie abimé cf. photo 2 screen has defects: red vertical line on the middle and 2 spots, small body damaged check photo 2 modèle le plus performant de la gamme toshiba satellite pro 4xx 64Mo RAM 4Go HDD Pentium II 266 MMX intel BX chipset carte son compatible sous dos windows sound system et soundblaster (yamaha opl3) écran TFT 13.3 pouces xga 1024 x 768 carte 3d s3 virge mx très bon PC portable pour des vieux jeux DOS avec lecteur de cd fonctionnel très bon état vu son âge la batterie tient la charge Windows 98 installé plus quelques jeux pour tester livré avec un chargeur original, documentation et cd réinstallation windows 95 Vous trouverez ci dessous une vidéo du PC en vente aucune garantie en vertu de l’article 1643 du Code civil excellent old dos gaming laptop you will get working cd drive In really good condition battery is OK with genuine charger, books b'&' windows 95 install cd Windows 98, some old games to check audio Check below a video of the computer I'm selling Watch Video Video will open in a new window Using the App? Paste link into a browser window: [isdntekvideo] En savoir plus Collaboration commerciale.

Austria, Luxembourg, Portugal: delivery cost 11€ très bon PC portable pour des jeux DOS avec lecteur de disquette et lecteur de cd (via la base fournie) les 2 fonctionnels fournie également sa sacoche officielle carte son compatible soundblaster pro très bon état vu son âge mais la plasturgie se fissure (scotch blanc) en parfait état de fonctionnement Windows 98 SE installé plus quelques jeux dos pour tester audio 16 Mo RAM, 2Go HDD, processeur Pentium 150Mhz mmx et carte graphique PCI Cirrus Logic GD7548 la batterie tient à peine la chage livré avec un chargeur d'origine Vous trouverez ci dessous une vidéo du PC en vente aucune garantie en vertu de l’article 1643 du Code civil one of the best old dos gaming laptop you can boot directly to DOS via F8 key you will get a floppy drive and a cd drive all 2 working sound card is compatible with soundblaster pro In good condition (plastic a bit damaged and repair with white scotch) b'&' in perfect working condition with genuine charger and case Windows 98 SE, some old dos games to check audio Check below a video of the computer I'm selling 353634391387 Video will open in a new window Using the App? Paste link into a browser window: [isdntekvideo] En savoir plus Collaboration commerciale.

Technology Printing Method Epson Micro Piezo™ print head Nozzle Configuration 180 Nozzles Black, 59 Nozzles per Color Minimum Droplet Size 3 pl, With Variable-Sized Droplet Technology Ink Technology Claria™ Home Ink Printing Resolution 5,760 x 1,440 DPI Category Home All-in-One Functions Print, Scan, Copy Print Printing Speed ISO/IEC 24734 10 pages/min Monochrome, 4.5 pages/min Colour Printing Speed 38 Seconds per 10 x 15 cm photo (Epson Premium Glossy Photo Paper), 33 pages/min Monochrome (plain paper 75 g/m²), 15 pages/min Colour (plain paper 75 g/m²) Colours Black, Cyan, Yellow, Magenta Scan Single-sided scan speed (A4 black) 300 DPI 2.4 msec/line Single-sided scan speed (A4 colour) 300 DPI 9.5 msec/line Optical Resolution 1,200 DPI x 2,400 DPI (Horizontal x Vertical) Scanner type Contact image sensor (CIS) Paper / Media Handling Number of paper trays 1 Paper Formats A4 (21.0x29.7 cm), A5 (14.8x21.0 cm), A6 (10.5x14.8 cm), B5 (17.6x25.7 cm), C6 (Envelope), DL (Envelope), No. 10 (Envelope), Letter Legal, 9 x 13 cm, 10 x 15 cm, 13 x 18 cm, 13 x 20 cm, 20 x 25 cm, 100 x 148 mm, 16:9 Duplex Manual Print Margin 0 mm top, 0 mm right, 0 mm bottom, 0 mm left (Wherever margin is defined. Otherwise 3mm top, left, right, bottom.) multifunction 100 Sheets Standard, 20 Photo Sheets Media Handling Borderless print, Manual duplex General Energy Use 13 Watt (standalone copying, ISO/IEC 24712 pattern), 1.6 Watt (sleep mode) Supply Voltage AC 100 V - 240 V, 50 Hz - 60 Hz Product dimensions 390‎ x 300 x 146 mm (Width x Depth x Height) Product weight 4.3 kg Noise Level 4.9 B (A) with Epson Premium Glossy Photo Paper / Photo RPM mode - 36 dB (A) with Epson Premium Glossy Photo Paper / Photo RPM mode Compatible Operating Systems Mac OS X 10.6.8 or later, Windows 10, Windows 7, Windows 8 (32/64 bit), Windows 8.1, Windows Vista, Windows XP, XP Professional x64 Edition Included Software Epson Easy Photo Print Interfaces USB, WiFi, Wi-Fi Direct WLAN Security WEP 64 Bit, WEP 128 Bit, WPA PSK (TKIP), WPA PSK (AES) Mobile and Cloud printing services Epson Connect (iPrint, Email Print, Remote Print Driver), Apple AirPrint, Google Cloud Print What's in the box Individual Ink Cartridges, Main unit, Power cable, Setup guide, Software (CD), Warranty document Colour White Other Features Panel Type: Color, Diagonal: 3.7 cm Memory Cards SD, SDHC, SDXC, MiniSD*, MiniSDHC*, MicroSD*, MicroSDHC*, MicroSDXC* (* Adaptor required, not supplied in box) Features Red eye removal, Photo Enhance

ACER MCEIR - 210   LC.MCE05.002    Récepteur Infrarouge USB pour Windows média center Vendu sans câble USB Très bon état. Télécommande en vente dans une autre annonce, consultez les autres objets. Remise en main propre possible dans les Alpes-Maritimes. Livraison en lettre suivie ou Colissimo. Envoi groupé avec réduction des frais d'envoi si achat de plusieurs objets. En raison de la situation actuelle, Mondial Relay ayant stoppé son activité jusqu'à nouvel ordre, seuls les envois via La Poste en lettre suivie ou Colissimo seront possibles. Merci de votre compréhension. ACER MCEIR - 210   LC.MCE05.002   USB Infrared Receiver for Windows Media Center Sold without USB cable Very good condition. Remote control for sale in another ad, check other items. Handover possible in the Alpes-Maritimes. Tracked letter delivery. Bulk shipping with reduced shipping costs if multiple items are purchased.

plasturgie basse dessus+dessous  pour asus N71J état très correct vendu avec un licence windows 7 (non testé) envoi gratuit en mondial relay

- - - - - - - - Product Description Before you buy this product, you need to pay attention to: NOTE: The printer must be disconnected from the power source before the print head is installed, otherwise it has the risk of causing the print head circuit board to burn out. 1. When the print head is shipped, a protective liquid will be applied to the print head. Before using it for the first time, wipe the print head before installing it.Just wipe the copper sheet gently, wipe it clean with soft paper, don't wipe it with cleaning fluid or eraser. 2. During the regeneration process of the print head, the ink will be cleaned and the protection liquid will be injected. If there is no protective liquid, the print head cannot print because the pipeline channel is dry.If the print head can be detected, but the colors are uneven or blurred, you can continue printing with ink. Print a few more sheets of paper and wait for the excess protection fluid to run out, then you can print normally 3. If the printing effect is not clear, press the machine cleaning button to clean (the print head must be cleaned only when the ink cartridge is sufficient, or it will burn out easily). 4. You don't need to clean the print head with cleaning fluid, you can clean the print head directly on the machine. If you clean the print head with the cleaning fluid(or water) and do not drop the protective fluid, the print head will be completely blocked, and it will be useless.   Before you install this product, you need to pay attention to: 1.After receiving the print head, if you use a needle tube to inject water to check the nozzle or see if it is blocked, this is a very redundant and dangerous behavior.If the printing effect is not clear, press the machine cleaning button (the pFirst of all, once the print head enters the water, if the water is not dry, it is powered on. The main board will be burned out, and the print head will be burnt out. Secondly, the print heads sold in our shop have been strictly tested and filled with protective liquid.If you use a needle to inject water into the print head, it will not only wash away the protective liquid in the head, but also easily cause air blockage in the print head, resulting in no ink. 2.Be careful when installing the print head, be sure to cut off the power first, and install it in place. 3.When connecting the plug cable, do not have ink on it, and make sure that it is in good contact with the socket. 4.The steel shaft should also be clean and smooth. You can use a paper towel to stick some lubricating oil to wipe it. Do not directly add oil to the shaft. The excess oil will flow to the print head and cause damage. 5.After the machinery and circuit are all correct, check the water circuit. Firstly, check whether the ink volume in the ink cartridge is sufficient; secondly, check whether the small cleaning blade and the ink suction pump are dirty. 6.There will be air in the newly installed print head, so it will not print normally immediately. The printer can only produce perfect results after the air in the head is completely discharged.You can use the machine's own cleaning function for intermittent cleaning(Clean 2 times each time, and then 2 times after 30 minutes) Repeated over-cleaning will cause ink accumulation in the cleaning pump, which will not only cause color mixing, ink leakage, and waste ink.Finally, you can print more pictures to let the print head exhaust air during work. Reufrbished 950 951 Printhead for Hp officejet pro 8100 8600 CM751 950 951 Printhead for Hp 8100 8600 8610 8620 8630 8640 251dw 276dw Feature: Excellent performance and high quality. Made of high-quality material, durable, firm and stable for us to use. This is a cleaned, thoroughly tested and sealed Printhead. Good stability, long lifespan. Full color function. This is Aftermarket Replacement Item But Not Genuine. Size:104x

- - - - - - - - - - - - Product Description After purchasing and receiving the goods, please pay attention to the following items: NOTE: The power must be cut off before the Epson print head is installed, otherwise it will cause the print head’s circuit board to be burned out. 1.When the print head is shipped, it will be coated with a protective liquid. When using it for the first time, wipe the print head before installing it. The protective liquid drops on the chip and where the ink bleeds. And use tissue to gently wipe the protective liquid on the chip (on the copper sheet). Don't use cleaning fluid or eraser. 2.During the regeneration process of the print head, the original ink will be cleaned and the protective liquid will be injected. If there is no protective liquid, printing will not be done when  the pipeline is dry. If the print head can be detected, but color irregularity or blurry is observed, you can continue to add ink to print, print sheets to use up the protection liquid. And then the color can be used to print. 3. If the printing is not clear, press the cleaning button of the machine. And the print head can be cleaned when the ink cartridge is full of ink. If there is no ink to clean the print head, it is easy to be burn out. And you can print clearly after printing a few times. 4. Clean the print head directly on the machine instead using cleaning fluid. If you clean it with cleaning fluid and do not drop the protective fluid, the print head will be completely blocked  and can not be used. 5. Don't use cleaning fluid or water to clean the print head, otherwise the print head will be completely blocked. When replacing the print head, please pay attention to the following items: 1.After receiving the print head, do not use a needle tube to inject water to check if the print head is blocked. It is a useless and dangerous practice. First of all, once the print head gets water and is not dry, and power on the machine, the main board will be burned out, and even the print head will be burned out. 2.The head surface of the print head is very fragile. It must not be touched, and needs to be protected. Its surface is an aluminum sheet, and inside is coated with a crystal oscillator and a very small ink tube. It will be deformed or even broken when touched, and the print head will be scrapped. 3.Be careful when installing the print head, be sure to cut off the power first, and install it in place. After installation, please push gently with your hands. Do not power on after installation, because if the head is not in place, the head will easily break when the machine moves. But your hands can feel, and it is easy to control. 4.When connecting the plug cable, do not be with ink. And make sure to make good contact with the socket and not touch the feet. Otherwise, it will cause the print head to short-circuit and burn. 5.The steel shaft should also be clean and smooth. Use tissue to stick some lubricating oil to wipe it off. Do not directly add oil to the shaft because excess oil will flow to the print head and cause damage. 6.After confirming that the machinery and circuit are normal, it is necessary to check the water circuit. First, check whether the amount of water in the ink cartridge is sufficient or not; second, check whether the small cleaning blade and the ink pump are dirty or not. 7.There will be air in the newly installed print head, so it will not print normally immediately. Only after the air in the print head is completely exhausted can the lines be printed normally. First of all, you can use the machine's cleaning function to perform intermittent cleaning (two cleanings each time,and then two more cleanings after a 30-minute pause). Excessive cleaning for many times will cause ink accumulation in the cleaning pump. It will not only cause color mixing and ink leakage, but also

- - - - - - - - - - - - - - - - - - - - - - - - Product Description After purchasing and receiving the goods, please pay attention to the following items: NOTE: The power must be cut off before the Epson print head is installed, otherwise it will cause the print head’s circuit board to be burned out. 1.When the print head is shipped, it will be coated with a protective liquid. When using it for the first time, wipe the print head before installing it. The protective liquid drops on the chip and where the ink bleeds. And use tissue to gently wipe the protective liquid on the chip (on the copper sheet). Don't use cleaning fluid or eraser. 2.During the regeneration process of the print head, the original ink will be cleaned and the protective liquid will be injected. If there is no protective liquid, printing will not be done when the pipeline is dry. If the print head can be detected, but color irregularity or blurry is observed, you can continue to add ink to print, print sheets to use up the protection liquid. And then the color can be used to print. 3. If the printing is not clear, press the cleaning button of the machine. And the print head can be cleaned when the ink cartridge is full of ink. If there is no ink to clean the print head, it is easy to be burn out. And you can print clearly after printing a few times. 4. Clean the print head directly on the machine instead using cleaning fluid. If you clean it with cleaning fluid and do not drop the protective fluid, the print head will be completely blocked and can not be used. 5. Don't use cleaning fluid or water to clean the print head, otherwise the print head will be completely blocked. When replacing the print head, please pay attention to the following items: 1.After receiving the print head, do not use a needle tube to inject water to check if the print head is blocked. It is a useless and dangerous practice. First of all, once the print head gets water and is not dry, and power on the machine, the main board will be burned out, and even the print head will be burned out. 2.The head surface of the print head is very fragile. It must not be touched, and needs to be protected. Its surface is an aluminum sheet, and inside is coated with a crystal oscillator and a very small ink tube. It will be deformed or even broken when touched, and the print head will be scrapped. 3.Be careful when installing the print head, be sure to cut off the power first, and install it in place. After installation, please push gently with your hands. Do not power on after installation, because if the head is not in place, the head will easily break when the machine moves. But your hands can feel, and it is easy to control. 4.When connecting the plug cable, do not be with ink. And make sure to make good contact with the socket and not touch the feet. Otherwise, it will cause the print head to short-circuit and burn. 5.The steel shaft should also be clean and smooth. Use tissue to stick some lubricating oil to wipe it off. Do not directly add oil to the shaft because excess oil will flow to the print head and cause damage. 6.After confirming that the machinery and circuit are normal, it is necessary to check the water circuit. First, check whether the amount of water in the ink cartridge is sufficient or not; second, check whether the small cleaning blade and the ink pump are dirty or not. 7.There will be air in the newly installed print head, so it will not print normally immediately. Only after the air in the print head is completely exhausted can the lines be printed normally. First of all, you can use the machine's cleaning function to perform intermittent cleaning (two cleanings each time,and then two more cleanings after a 30-minute pause). Excessive cleaning for many times will cause ink accumulation in the cleaning pump. It will not only cause color mixing and ink leakage, but also waste ink. 8.Secondly, you can print more pictures to let the print head exhaus En savoir plus Collaboration commerciale.

- - - - - - - - - - - - Product Description After purchasing and receiving the goods, please pay attention to the following items: NOTE: The power must be cut off before the Epson print head is installed, otherwise it will cause the print head’s circuit board to be burned out. 1.When the print head is shipped, it will be coated with a protective liquid. When using it for the first time, wipe the print head before installing it. The protective liquid drops on the chip and where the ink bleeds. And use tissue to gently wipe the protective liquid on the chip (on the copper sheet). Don't use cleaning fluid or eraser. 2.During the regeneration process of the print head, the original ink will be cleaned and the protective liquid will be injected. If there is no protective liquid, printing will not be done when the pipeline is dry. If the print head can be detected, but color irregularity or blurry is observed, you can continue to add ink to print, print sheets to use up the protection liquid. And then the color can be used to print. 3. If the printing is not clear, press the cleaning button of the machine. And the print head can be cleaned when the ink cartridge is full of ink. If there is no ink to clean the print head, it is easy to be burn out. And you can print clearly after printing a few times. 4. Clean the print head directly on the machine instead using cleaning fluid. If you clean it with cleaning fluid and do not drop the protective fluid, the print head will be completely blocked and can not be used. 5. Don't use cleaning fluid or water to clean the print head, otherwise the print head will be completely blocked. When replacing the print head, please pay attention to the following items: 1.After receiving the print head, do not use a needle tube to inject water to check if the print head is blocked. It is a useless and dangerous practice. First of all, once the print head gets water and is not dry, and power on the machine, the main board will be burned out, and even the print head will be burned out. 2.The head surface of the print head is very fragile. It must not be touched, and needs to be protected. Its surface is an aluminum sheet, and inside is coated with a crystal oscillator and a very small ink tube. It will be deformed or even broken when touched, and the print head will be scrapped. 3.Be careful when installing the print head, be sure to cut off the power first, and install it in place. After installation, please push gently with your hands. Do not power on after installation, because if the head is not in place, the head will easily break when the machine moves. But your hands can feel, and it is easy to control. 4.When connecting the plug cable, do not be with ink. And make sure to make good contact with the socket and not touch the feet. Otherwise, it will cause the print head to short-circuit and burn. 5.The steel shaft should also be clean and smooth. Use tissue to stick some lubricating oil to wipe it off. Do not directly add oil to the shaft because excess oil will flow to the print head and cause damage. 6.After confirming that the machinery and circuit are normal, it is necessary to check the water circuit. First, check whether the amount of water in the ink cartridge is sufficient or not; second, check whether the small cleaning blade and the ink pump are dirty or not. 7.There will be air in the newly installed print head, so it will not print normally immediately. Only after the air in the print head is completely exhausted can the lines be printed normally. First of all, you can use the machine's cleaning function to perform intermittent cleaning (two cleanings each time,and then two more cleanings after a 30-minute pause). Excessive cleaning for many times will cause ink accumulation in the cleaning pump. It will not only cause color mixing and ink leakage, but also waste ink. 8.Secondly, you can print more pictures to let the print head exhaust air during work. Third, if the mac En savoir plus Collaboration commerciale.

- Print head QY6-0073 For IP3600 MP558 568 MX868 MX870 MX878 MG5140 5180 CE 26.99 USD Free shipping - Full Color QY6-0072 Printhead Printer Head for iP4600 iP4680 iP4700 iP4760 CE 35.99 USD Free shipping - Full Color QY60078 Printhead Printer Head for MG6220 6140 6180 6100 6150 6200 CE 43.99 USD Free shipping - Replacement Printer Print Head QY6-0050 For 900PD I900D I950D IP6100D IP6000D CE 25.99 USD Free shipping - QY6-0055 Printhead Printer Head for i9900 iP8500 i9950 ip9100 PRO9000 CE 68.99 USD Free shipping - 950 951 Print head For CM 751 752 Hp 8100 8600 8610 8620 8630 8640 251dw CE 145.99 USD Free shipping - Printhead QY6-0083 Fit For iP8720 iP8750 iP8780 MG7520 MG7180 inkjet printer CE 39.99 USD Free shipping - Colors QY6-0076 Printhead Printer Head for i9900 I9950 Pro900 9900i Mark II AF 91.99 USD Free shipping - Replacement Printer Print Head Full Color QY6-0068 Fits PIXMA iP100 IP110 ZA CE 46.99 USD Free shipping - PrintHead for HP 932 933 XL OfficeJet 7110 7610 6600 6100 e 6700 7612 CB863 T CE 43.49 USD Free shipping - Printhead Printer Head for Kodak 30 ESP Office 2100 / 2150 /2170 Hero 3.1/4.2 CE 22.99 USD Free shipping - Replacement Printer Print Head QY6-0090 For TS8020 TS9020 TS8040 8050 8070 CE 49.99 USD Free shipping - 934 935 Printhead Fit HP Officejet Pro 6230 6830 6815 6812 6835 CQ163-80060 CE 36.99 USD Free shipping - 952 955 Printhead for HP Officejet Pro 8710 8216 7740 7720 8720 8730 8740 CE 85.99 USD Free shipping - 4Color Printhead For HP 862/564 Photosmart B110A B210A B109A B109N C410A CE 23.49 USD Free shipping - Replacement Printer Print Head Printhead QY6-0059 For IP4200 MP500 MP530 CE 31.99 USD Free shipping - - - - - - - - - - - Product Description Before you buy this product, you need to pay attention to: NOTE: The printer must be disconnected from the power source before the print head is installed, otherwise it has the risk of causing the print head circuit board to burn out. 1. When the print head is shipped, a protective liquid will be applied to the print head. Before using it for the first time, wipe the print head before installing it.Just wipe the copper sheet gently, wipe it clean with soft paper, don't wipe it with cleaning fluid or eraser. 2. During the regeneration process of the print head, the ink will be cleaned and the protection liquid will be injected. If there is no protective liquid, the print head cannot print because the pipeline channel is dry.If the print head can be detected, but the colors are uneven or blurred, you can continue printing with ink. Print a few more sheets of paper and wait for the excess protection fluid to run out, then you can print normally 3. If the printing effect is not clear, press the machine cleaning button to clean (the print head must be cleaned only when the ink cartridge is sufficient, or it will burn out easily). 4. You don't need to clean the print head with cleaning fluid, you can clean the print head directly on the machine. If you clean the print head with the cleaning fluid(or water) and do not drop the protective fluid, the print head will be completely blocked, and it will be useless.   Before you install this product, you need to pay attention to: 1.After receiving the print head, if you use a needle tube to inject water to check the nozzle or see if it is blocked, this is a very redundant and dangerous behavior.If the printing effect is not clear, press th

- 920 Testina Di Stampa Printhead Per Hp 6500 6500A 7000 7500A B210A Cd868-30002 46.79 EUR Free shipping - 14N0700 Testina di stampa Printhead per Lexmark Pro805 Pro205 209 S408 S505 IT 49.19 EUR Free shipping - Testina di stampa per iP8720 iP8750 iP8780 MG6310 MG7520 MG7180 QY6-0083 56.39 EUR Free shipping - 934 935 Testina di stampa Printhead per HP Pro 6230 6830 6815 6812 6835 G 56.39 EUR Free shipping - F173030 Testina Di Stampa Printhead Per 1390/1400/1410/1430/1500W Y1 182.39 EUR Free shipping - QY6-0072 Testina di stampa Printhead per iP4600 iP4680 iP4700 iP4760 MP630 52.79 EUR Free shipping - Testina di stampa stampante per L300 L303 L351 L355 L358 L111/120 L211 NEW 67.19 EUR Free shipping - Testina di stampa stampante per HP 932XL OfficeJet 7110 7610 7612 7600 6060 6100 63.59 EUR Free shipping - 564 Testina Di Stampa Printhead Per Photosmart 7510 7515 7520 7525 Cb326-30002 39.59 EUR Free shipping - QY6-0089 Testina di stampa Printhead per TS5080 6020 6050 6051 6052 TS6080 R0 61.19 EUR Free shipping - QY6-0055 Testina di stampa Printhead per Canon i9900 iP8500 i9950 ip9100 PRO9000 85.19 EUR Free shipping - PrintHead per iP7220 iP7250 IP7240/7210 MG5420/5422/5450/6400 QY6-0082 New 56.39 EUR Free shipping - Testina di stampa Printhead Office 2100 / 2150 / 2170 Hero 3.1 / 4.2 41.99 EUR Free shipping - Testina di stampa per IP3600 iP3680 MP560 MP540 MP620 MX860 MX870 MG5140 45.59 EUR Free shipping - Testina di stampa stampante per HP 862/564 B110A B210A B109A B109N C410A C309A 44.39 EUR Free shipping - QY6-0059 Testina di stampa Printhead per IP4200 MP500 MP530 IT 50.39 EUR Free shipping - 952 955 Testina di stampa Printhead per HP Pro 8710 8216 8720 8730 8740 8210 G 98.39 EUR Free shipping - Testina di stampa Print Head 6 Colors per TX800 TX820 A800 F192040 146.39 EUR Free shipping - QY6-0078 Testina di stampa Printhead per MG6220 6140 6180 6100 6150 6200 61.19 EUR Free shipping - CN688A Testina di stampa Printhead per HP 3070 3520 3525 5525 4620 5520 5510 IT 41.99 EUR Free shipping - - - - - - - - - - - - - - - - - - - - Product Description Before you buy this product, you need to pay attention to: NOTE: The printer must be disconnected from the power source before the print head is installed, otherwise it has the risk of causing the print head circuit board to burn out. 1. When the print head is shipped, a protective liquid will be applied to the print head. Before using it for the first time, wipe the print head before installing it.Just wipe the copper sheet gently, wipe it clean with soft paper, don't wipe it with cleaning fluid or eraser. 2. During the regeneration process of the print head, the ink will be cleaned and the protection liquid will be injected. If there is no protective liquid, the print head cannot print because the pipeline channel is dry.If the print head can be detected, but the colors are uneven or blurred, you can continue printing with ink. Print a few more sheets of paper and wait for the excess protection fluid to run out, then you can print normally 3. If the printing effect is not clear, press the machine cleaning button to clean (the print head must be cleaned only when the ink cartridge is sufficient, or it will burn out easily). 4. You don't need to clean the print head with cleaning fluid, you can clean the print head directly on the machine. If you clean the print head with the cleaning fluid(or water) and do not drop the protective fluid, the print head will be completely blocked, and it will be useless. Before you install this product, you need to pay attention to: 1.After receiving the print head, if you use a needle tube to inject water to check the nozzle or see if it is blocked, this is a very redundant and dangerous behavior.If the printing effect is not clear, press the machine cleaning button (the pFirst of all, once the print head enters the water, if the water is not dry, it is powered on. The main board will be burned out, and the pr En savoir plus Collaboration commerciale.

Vous Pouvez Aussi Aimer - Tête d'impression Printhead pour iX4000 iX5000 iP3100 iP3000 MP710 MP730 MP740 55.19 EUR Free shipping - Tête d'impression Printhead pour 9100i S9000 S900 i9100 F9000 F900 QY6-0039 57.59 EUR Free shipping - Tête d'impression pour WF7610 WF7620 WF7611 WF7111 WF7621 WF3641 WF7710 A 65.99 EUR Free shipping - Tête d'impression Printhead pour i9900 I9950 IP8600 Pro900 9900i Mark II S 107.99 EUR Free shipping - Tête d'impression pour Epson WF-2630 L300 L301 XP315 XP415 ME401 ME303 WF-2520 59.99 EUR Free shipping - Tête d'impression pour HP 932 933 XL OfficeJet 7110 7610 7612 7600 6060e 6100e 57.59 EUR Free shipping - QY6-0075 Tête d'impression pour MP770 MP790 PIXMA MP750 MP760 860I 865R QY6-0049 41.99 EUR Free shipping - Tête d'impression pour e pson XP600/XP601/XP950/XP820 FA09050 Full Colors S 260.39 EUR Free shipping SAFE b'&' SECURE SHOPPING 100% SATISFACTION GUARANTEED FAST SHIPPING Store Categories Store Categories - Other - Voitures - Électronique grand public - Ordinateurs / tablettes et rés - Commerce et industrie - Maison et jardin - Articles de sport - Jouets et hobbies - Instruments de musique - Accessoires pour panneau de ba - Caméras et photos - Vêtements - Express Post'S Item 934 935 Tête d'impression pour HP Officejet Pro 6230 6830 6815 6812 6835 S Product Description After purchasing and receiving the goods, please pay attention to the following items: NOTE: The power must be cut off before the Epson print head is installed, otherwise it will cause the print head’s circuit board to be burned out. 1.When the print head is shipped, it will be coated with a protective liquid. When using it for the first time, wipe the print head before installing it. The protective liquid drops on the chip and where the ink bleeds. And use tissue to gently wipe the protective liquid on the chip (on the copper sheet). Don't use cleaning fluid or eraser. 2.During the regeneration process of the print head, the original ink will be cleaned and the protective liquid will be injected. If there is no protective liquid, printing will not be done when the pipeline is dry. If the print head can be detected, but color irregularity or blurry is observed, you can continue to add ink to print, print sheets to use up the protection liquid. And then the color can be used to print. 3. If the printing is not clear, press the cleaning button of the machine. And the print head can be cleaned when the ink cartridge is full of ink. If there is no ink to clean the print head, it is easy to be burn out. And you can print clearly after printing a few times. 4. Clean the print head directly on the machine instead using cleaning fluid. If you clean it with cleaning fluid and do not drop the protective fluid, the print head will be completely blocked and can not be used. 5. Don't use cleaning fluid or water to clean the print head, otherwise the print head will be completely blocked. When replacing the print head, please pay attention to the following items: 1.After receiving the print head, do not use a needle tube to inject water to check if the print head is blocked. It is a useless and dangerous practice. First of all, once the print head gets water and is not dry, and power on the machine, the main board will be burned out, and even the print head will be burned out. 2.The head surface of the print head is very fragile. It must not be touched, and needs to be protected. Its surface is an aluminum sheet, and inside is coated with a crystal oscillator and a very small ink tube. It will be deformed or even broken when touched, and the print head will be scrapped. 3.Be careful when installing the print head, be sure to cut off the power first, and install it in place. After installation, please push gently with your hands. Do not power on after installation, because if the head is not in place, the head will easily break when the machine moves. But your hands can feel, and it is easy to control. 4.When connecting the pl En savoir plus Collaboration commerciale.

- 920 Testina Di Stampa Printhead Per Hp 6500 6500A 7000 7500A B210A Cd868-30002 46.79 EUR Free shipping - QY6-0078 Testina di stampa Printhead per MG6220 6140 6180 6100 6150 6200 61.19 EUR Free shipping - F173030 Testina Di Stampa Printhead Per 1390/1400/1410/1430/1500W Y1 182.39 EUR Free shipping - QY6-0072 Testina di stampa Printhead per iP4600 iP4680 iP4700 iP4760 MP630 52.79 EUR Free shipping - Testina di stampa stampante per HP 862/564 B110A B210A B109A B109N C410A C309A 44.39 EUR Free shipping - 564 Testina Di Stampa Printhead Per Photosmart 7510 7515 7520 7525 Cb326-30002 39.59 EUR Free shipping - 952 955 Testina di stampa Printhead per HP Pro 8710 8216 8720 8730 8740 8210 G 98.39 EUR Free shipping - PrintHead per iP7220 iP7250 IP7240/7210 MG5420/5422/5450/6400 QY6-0082 New 56.39 EUR Free shipping - Testina di stampa per iP8720 iP8750 iP8780 MG6310 MG7520 MG7180 QY6-0083 56.39 EUR Free shipping - Testina di stampa stampante per HP 932XL OfficeJet 7110 7610 7612 7600 6060 6100 63.59 EUR Free shipping - Testina di stampa stampante per L300 L303 L351 L355 L358 L111/120 L211 NEW 67.19 EUR Free shipping - Testina di stampa Print Head 6 Colors per TX800 TX820 A800 F192040 146.39 EUR Free shipping - QY6-0055 Testina di stampa Printhead per Canon i9900 iP8500 i9950 ip9100 PRO9000 85.19 EUR Free shipping - QY6-0059 Testina di stampa Printhead per IP4200 MP500 MP530 IT 50.39 EUR Free shipping - 950 951 Testina di stampa Printhead per HP Pro 8100 8600 8640 251DW 276dw A7 133.19 EUR Free shipping - QY6-0089 Testina di stampa Printhead per TS5080 6020 6050 6051 6052 TS6080 R0 61.19 EUR Free shipping - QY6-0039 Testina di stampa Printhead 9100i S9000 S900 i9100 F9000 F900 F930 IT 63.59 EUR Free shipping - Testina di stampa per IP3600 iP3680 MP560 MP540 MP620 MX860 MX870 MG5140 45.59 EUR Free shipping - Testina di stampa stampante per iP6600D iP6700D iP6600 iP6700 QY6-0063 49.19 EUR Free shipping - CN688A Testina di stampa Printhead per HP 3070 3520 3525 5525 4620 5520 5510 IT 41.99 EUR Free shipping - - - - - - - - - - - - Product Description After purchasing and receiving the goods, please pay attention to the following items: NOTE: The power must be cut off before the Epson print head is installed, otherwise it will cause the print head’s circuit board to be burned out. 1.When the print head is shipped, it will be coated with a protective liquid. When using it for the first time, wipe the print head before installing it. The protective liquid drops on the chip and where the ink bleeds. And use tissue to gently wipe the protective liquid on the chip (on the copper sheet). Don't use cleaning fluid or eraser. 2.During the regeneration process of the print head, the original ink will be cleaned and the protective liquid will be injected. If there is no protective liquid, printing will not be done when the pipeline is dry. If the print head can be detected, but color irregularity or blurry is observed, you can continue to add ink to print, print sheets to use up the protection liquid. And then the color can be used to print. 3. If the printing is not clear, press the cleaning button of the machine. And the print head can be cleaned when the ink cartridge is full of ink. If there is no ink to clean the print head, it is easy to be burn out. And you can print clearly after printing a few times. 4. Clean the print head directly on the machine instead using cleaning fluid. If you clean it with cleaning fluid and do not drop the protective fluid, the print head will be completely blocked and can not be used. 5. Don't use cleaning fluid or water to clean the print head, otherwise the print head will be completely blocked. When replacing the print head, please pay attention to the following items: 1.After receiving the print head, do not use a needle tube to inject water to check if the print head is blocked. It is a useless and dangerous practice. First of all, once the print head gets water and is not dry, En savoir plus Collaboration commerciale.