Wmi and snmp

APC USV WEB/SNMP MANAGEMENT NETWORK CARD LAN CARD UPS AP9606 FOR SmartSLOT 77   Attention, If you have a password at startup this product will be to program by yourself and will be to make a factory restoration     PRODUCTS SOLD BY RESELLER WITH BILL PRODUIT VENDU PAR VENDEUR PROFESSIONNEL AVEC FACTURE Condition: Used / Tested Occasion testé Physical Condition: Good / état ok Warranty Provided: 90 Days / garantie de 3 mois

Intel PRO/1000 PT Dual Port Server Network Adapter Card EXPI9402PT - TWO Gigabit Ethernet Copper Server Connections in a Single PCI Express x4 Slot. Please note: Comes with High-Profile Bracket only. P/N: EXPI9402PT KEY FEATURES: - Intel 82571GB Gigabit Controller: Enables two Gigabit connections in a single adapter, delivering increased bandwidth for slot-constrained servers and providing high performance, reliability, and low power use in a single, integrated, dual port PCI Express Gigabit Ethernet controller chip. - Load balancing on multiple CPUs: Increases performance on multi-processor systems by efficiently balancing network loads across CPU cores when used with Receive-Side Scaling from Microsoft or Scalable I/O on Linux. - Interrupt moderation: Delivers increased performance while significantly reducing CPU utilization. - Compatible with x4, x8, and x16 full-height PCI Express slots: Allows dual-port operation in almost any PCI Express server slot, except x1 slots, and allows each port to operate without interfering with the other. - Support for most network operating systems (NOS): Enables widespread deployment. - Remote management support: Reduces support costs with remote management based on industry-wide standards. - Category-5 unshielded twisted pair (UTP), 4-pair cabling: Uses existing 4-pair cabling and saves re-wiring costs. - RoHS compliant, lead-free technology. - Intel PROSet Utility for Microsoft Device Manager: Provides point-and-click power over individual adapters, advanced adapter features, connection teaming, and virtual local area network (VLAN) configuration. - Advanced cable diagnostics: Dynamically tests and reports network problems (error rate, cable length) and automatically compensates for cable issues (cross-over cable, wrong pin-out/polarity). SPECIFICATIONS: General: Product code: EXPI9402PT4 Connectors: Two RJ-45 IEEE standards/network topology: 10BASE-T, 100BASE-TX, 1000BASE-T Wiring: Category-5, unshielded twisted pair (UTP), 4-pair Adapter Product Features: Intel PROSet Utility and Intel PRO Intelligent Install for easy installation: Yes Intel lead-free technology: Yes Plug and play specification support: Standard Auto-negotiation, full-duplex capable: Yes Integrated media access control (MAC) and physical layer (PHY): Yes Includes a full-height bracket: Yes Cable distance: 100 m in Category-5 for 100/1000 Mbps; and Category-3 for 10 Mbps Network Management: Wired for Management (WfM) baseline v2.0 enabled for servers: Yes DMI 2.0 support, Windows Management Instrumentation (WMI) and SNMP-manageable SMBus support: Yes Remote Installation Services (RIS): Yes Diagnostics (loopback, testability, PHY register access): Yes Advanced configuration and power interface (ACPI) 1.0 power management: Yes Wake on LAN support over PCI Express: Yes PXE 2.0 enabled through boot read-only memory (ROM): Yes Network Operating Systems (NOS) Software Support: Microsoft Windows, Linux (non-exhaustive list). Advanced Software Features: Adapter fault tolerance (AFT): Yes Switch fault tolerance (SFT): Yes Adaptive load balancing (ALB): Yes Fast EtherChannel (FEC): Yes Gigabit EtherChannel (GEC): Yes Teaming support: Scales up to 8 connections Multiple teams: Supports 4 separate teams, maximum IEEE 802.3ad (link aggregation control protocol): Yes Test switch configuration: Tested with major switch original equipment manufacturers (OEMs) PCIe Hot Plug/Active peripheral component interconnect (PCI): Yes IEEE 802.1Q VLANs: Yes IEEE 802.3 (z, ab, u, x) flow control support: Yes TCP checksum offload — transmission control protocol (TCP), user datagram protocol (UDP), Internet protocol (IP): Yes IEEE 802.1p: Yes TCP segmentation/large send offload: Yes Interrupt moderation: Yes Technical Features: Data rate(s) supported per port: 10, 100, and 1000 Mbps Bus type: PCI Express 1.0a Bus width: x4 lane PCI Express, operable in x4, x8, x16 slots En savoir plus Collaboration commerciale.

Spéc. Matériel: CPUMarvell 6281 1.2GHzDRAM256MB DDRII RAMFlash Memory16MB DOMHDD4 x 3.5" or 2.5" SATA I/II hard disk drive (HDD) NOTE: 1. The system is shipped without hard disk drives.HDD Tray4 x hot-swappable trayLAN Port2 x Gigabit RJ-45 Ethernet portLED IndicatorsStatus, LAN, USB, eSATA, HDD 1, HDD 2, HDD 3, HDD 4USB4 x USB 2.0 port (Front: 1; Back: 3) Supports USB printer, disk, pen drive, USB hub, and USB UPS, etc.eSATA2 x eSATA port (Back)ButtonsPower button, USB one-touch-backup button, reset buttonAlarm BuzzerSystem warningForm FactorTowerDimensions177(H) x 180(W) x 235(D) mm 6.97(H) x 7.09(W) x 9.25(D) inchWeightNet weight (NAS only): 3 Kg (6.61 lbs) Gross weight (with packing and accessories): 4.66 kg/10.27 lbPower Consumption (W)Sleep mode: 11W In operation: 26W (with 4 x 500GB HDD installed)Temperature0-40˚C/ 32-104°FHumidity5~95% RH non-condensing, wet bulb: 27˚C.Power Supply90W AC adapter, 100-240V~/2A-1A 50-60HzSecure DesignK-Lock security slot for theft preventionFan1 x quiet cooling fan (9 cm, 12V DC) Spéc. Logiciel: Operating SystemEmbedded LinuxiSCSI (IP SAN) 1. iSCSI Target - Multi-LUNs per Target - Up to 256 LUNs - Supports LUN Mapping & Masking - Supports SPC-3 Persistent Reservation - Supports MPIO & MC/S 2. Virtual Disk Drive (via iSCSI Initiator) - Stack Chaining Master - Max. Virtual Disk Drives: 8 Supported Operating System 1. Apple Mac OS 10.7 or later 2. Linux and UNIX 3. Microsoft Windows 7, 8, and 10 4. Microsoft Windows Server 2003, 2008 R2, 2012, 2012 R2 and 2016 Disk Management 1. Single Disk, JBOD, RAID 0, 1, 5, 5+Hot Spare, 6, 10 2. Online RAID Capacity Expansion & Online RAID Level Migration 3. Bad Block Scan & Hard Drive S.M.A.R.T. 4. Global Hot SpareDrive 5. RAID Recovery 6. Bitmap Support 7. ISO Mount (via Web File Manager & Web Administration) Supported Web Browsers 1. Internet Explorer 7 & 8 or later 2. Firefox 3 or later 3. Safari 3 & 4 or later 4. Google Chrome Power Management 1. Scheduled Power on/off (Max 15 settings) 2. Automatic Power on after Power Recovery Multilingual Support 1. Chinese (Traditional & Simplified), Czech, Danish, Dutch, English, Finnish, French, German, Italian, Japanese, Korean, Norwegian, Polish, Russian, Spanish, Swedish, Turkish. Access Right Management 1. Max User Accounts: 4,096 2. Max Groups: 512 3. Max. Share Folder: 512 4. Batch Creating Users 5. Import/ Export User 6. User Quota Management 7. Subfolder Permissions Support File System 1. Internal HDD: EXT3, EXT4 2. External HDD: EXT3, EXT4, NTFS, FAT32, HFS+ Windows AD Support 1. Domain Users Login via CIFS/SMB, AFP, FTP and Web File Manager 2. Supports NTLMv2 Authentication Networking 1. TCP/IP (IPv4 & IPv6: Dual Stack) 2. Dual Gigabit NICs with Jumbo Frame 3. Multi-IP Setting, Port Trunking/ NIC Teaming (Modes: Balance-rr, Active Backup, Balance XOR, Broadcast, IEEE 802.3ad/ Link Aggregation, Balance-tlb and Balance-alb.) 4. DHCP Client, DHCP Server 5. Protocols: CIFS/SMB, AFP (3.1), NFS, FTP, HTTP, HTTPS, Telnet, SSH, iSCSI and SNMP. 6. Network Service Discovery (UPnP, Bonjour) 7. USB Wi-Fi 802.11n Adapter Support (Optional Purchase) Web Administration 1. AJAX-based User Interface 2. HTTP/HTTPS Connections 3. Alert Notification (Email & SMS) 4. Smart Fan Control 5. DDNS & MyCloudNAS Remote Access 6. SNMP (v2 & v3) 7. UPS Support with SNMP Management (USB) 8. Supports Network UPS 9. Resource Monitor 10. Network Recycle Bin for CIFS/SMB and AFP 11. Comprehensive Logs (Events & Connection) 12. Real-time Online User List 13. Syslog Client 14. Firmware Update with Live Update Notification 15. Backup and Restore System Settings 16. Restore to Factory Default Network File Sharing 1. CIFS/SMB (Plus DFS Support) 2. AFP 3. NFS 4. FTP 5. WebDAV Backup Solution 1. USB One Touch Backup (Import/Export) 2. Apple Time Machine Support with Bac

Carte ATTO Celerity Fc42es 4gb Dual Fibre Channel PCI Express Adapter - Excellent état. Vendues séparément ou jusqu'à 3 disponibles. The Celerity FC-42ES 4 Gb Fibre-Channel Dual-Channel PCI Express Host Adapter from ATTO is a PCI Express expansion card that allows you to connect two Fibre-Channel devices to your computer. The card features dual 4 Gb Fibre-Channel ports with optical connectors, but it is fully compatible with 2 Gb and 1 Gb Fibre-Channel devices. The card supports speeds of up to 800 MB/sec per channel, making this an excellent solution for your high-speed data access needs. Fibre-Channel Connection The 4 Gb Fibre-Channel connection translates into data transfer rates of up to 800 MB/sec. This gives you enough bandwidth to work with such data intensive applications as video editing, music production and database development. Advanced Fibre-Channel Functions The controller supports many advanced Fibre-Channel functions including the SNIA HBA API and Windows FDMI and WMI. It also supports Target and Initiator modes and is fully backwards compatible with 2 Gb and 1 Gb Fibre-Channel devices. ADS Technology The Advanced Data Streaming (ADS) Technology is designed to allow for controlled acceleration of data transfers, allowing you to move large amounts of data faster and more efficiently. This gives you the I/O performance you need to work with transfer intensive applications.

Product InformationThe SecureStack B2 switch family delivers advanced Layer 2+ switching in a single stack with up to 360-gigabit ports or 384 10/100 ports with 32 gigabit uplinks. Reliability and availability is assured with support for Closed Loop Stacking, redundant uplink connections, redundant power options and redundant stack management. An optional policy license will be made available approximately six months after initial shipments that will allow SecureStack B2 switches to participate in Secure Networks at the network edge.SecureStack B2 switches incorporate integrated stacking ports that support up to 20 Gbps of bi-directional bandwidth between any two adjacent switches for a total of 160 Gbps of stacking bandwidth. No additional stack module is required to stack the switches. Each switch has a 160 Gbps switch fabric with 40 Gbps per switch dedicated to stacking. In an eight-switch stack, 320 Gbps of switching bandwidth is dedicated to stacking. A single stack can be comprised of any combination of SecureStack B2 switches allowing a mixture of high-density 10/100, 10/100/1000 and/or Power-over-Ethernet ports to be linked to the network core via copper, multimode fiber and/or single-mode fiber Gigabit. Closed Loop Stacking can be implemented, which assures that a single switch or cable connection failure in the stack will not impact the overall stack operation. Stack switch units can be added to or removed from the stack with minimal packet interruption. Up to eight SecureStack B2 switches can be supported in a stack with a single IP address for complete stack management. Redundant stack management is supported by assigning a primary and secondary stack manager. Product IdentifiersBrandExtreme NetworksMPNB2H12448UPC0647030014173ModelB2H124-48 Product ID (ePID)74156187 Additional Product FeaturesPower over Ethernet (PoE)YesInterfaces48 X Network-Ethernet 10base-T/100base-Texas-R&J Enterprises-45Networking TypeSwitchPorts Quantity48Connectivity TechnologyWiredRouting ProtocolIgmp, Igmpv2Remote Management ProtocolTelnet, Rmon 9, Snmp 2, Snmp 3, Tftp, Snmp, Ssh-2, Ssh, Snmp 1, Rmon 2, Rmon 3, Rmon 1Form FactorExternalMAC Address Table Size8k EntriesTypeSwitch ManagedSwitching ProtocolEthernetEthernet TechnologyEthernet, Fast Ethernet (100-Mbit/S)CompatibilityPCOTHER FeaturesVlan SupportEnclosure TypeExternal

Cisco Systems ESW-520-24P-K9 Envois gratuit par Mondial Relay Réseau Type de Gestion: Entièrement géré The Cisco ESW 500 series, part of the Cisco Small Business Pro series, is a group of managed Ethernet switches that provide wire-speed Fast Ethernet and Gigabit Ethernet connectivity, integrated security, quality of service (QoS), and Power over Ethernet (PoE) to support all of your business network needs.  These switches integrate easily with Cisco Small Business Pro products as well as the Cisco Smart Business Communications System to provide a complete data, voice, video, and wireless networking solution for your business. With the Cisco ESW 500 series, you can take advantage of a proven network solution and a broad portfolio of high-performance, easy-to-manage switches that are designed and priced for small businesses. The Cisco ESW 500 series switches provide security, management, and other capabilities far beyond what unmanaged or "smart" switches can provide, without requiring you to configure features you don't need. The switches were designed to be part of the complete line of Small Business Pro networking and voice communications products that work together as part of proven, fully integrated, easy-to-use small business solution. Main Specification Product Description Cisco Small Business Pro ESW-520-24P - switch - 24 ports - Managed - rack-mountable Device Type Switch - 24 ports - Managed Enclosure Type Rack-mountable 1U Subtype Fast Ethernet Ports 24 x 10/100 (PoE) + 2 x combo Gigabit SFP + 2 x 10/100/1000 Power Over Ethernet (PoE) PoE Performance Switching capacity: 12.8 Gbps ¦ Forwarding performance (64-byte packet size): 9.5 Mpps MAC Address Table Size 8000 entries Remote Management Protocol: SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, SNMP 3, SNMP 2c, HTTP, HTTPS Features Flow control, Layer 2 switching, DHCP support, auto-negotiation, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, traffic shaping, DoS attack prevention, port mirroring, DiffServ support, Weighted Round Robin (WRR) queuing, Broadcast Storm Control, Multicast Storm Control, Unicast Storm Control, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS) Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s Power AC 120/230 V (50/60 Hz) Dimensions (WxDxH): 44 cm x 37.4 cm x 4.4 cm Weight: 2.2 kg !! N'hésitez pas à nous contacter pour plus de renseignement ou pour toute question. Faites nous une offre !! Visiter notre boutique et n'oubliez pas de nous ajouter a vos favoris ! !! N'hésitez pas à nous contacter pour plus de renseignement ou pour toute question. Faites nous une offre !!

Occasion en bon etat: Switch Gigabits D-LINK xStack DGS-3120-48TC. Occasion, en bon etat de fonctionnement, Vendu sans documentation, ni autres accessoires, vous achetez ce que vous voyez sur les nombreuses photos, RIEN DE PLUS. Marque: D-LINK Reference: DGS-3120-48TC Descriptif: La série xStack DGS-3120 est une gamme de switches empilables L2 optimisés pour la connexion des utilisateurs finaux aux réseaux sécurisés de PME ou d'entreprise. Grâce à leur prise en charge complète (empilage physique, multidiffusion et sécurité avancée), ils constituent la solution de couche d’accès Gigabit idéale. Données techniques: épaisseur maximale 25 mm Angle d’hélice 15 à 60 ° position de biseau maximal à 40 kg Force 10 mm Vitesse de travail maximale 2,5 m/min. Coups / minute 500 Puissance 1900 / 1400 W Poids 14,5 kg Alimentation 220 V / 50 Hz Générales: - 44 ports 10/100/1000Mbps - 4 Ports combo SFP - Rackable - Manageable Possibilité d'empilage - Empilage physique (jusqu'à six unités par pile) - Empilage virtuel (jusqu'à 32 unités par pile) - Deux ports d'empilage 10 Gigabit Ethernet Fonctions L2 - Table d'adresses MAC: 16 K - Contrôle de flux - Trame étendue jusqu'à 13 K octets - Protocoles STP: 802.1D STP / 802.1w RSTP / 802.1s MSTP - Détection de bouclage - Agrégation de liens 802.3ad - Mise en miroir des ports - IPv6 Multidiffusion L2 - Surveillance IGMP - Multidiffusion IP limitée - Surveillance MLD VLAN - 4096 groupes de réseaux VLAN - GVRP - Balisage VLAN 802.1Q - VLAN par port - Protocole VLAN 802.1v - VLAN voix - VLAN basé sur les adresses MAC - VLAN ISM - VLAN asymétrique - VLAN privé QoS (qualité de service) - 802.1p - 8 files d'attente par port - Contrôle de la bande passante (par port et en fonction du trafic) Liste de contrôle d'accès (ACL) - Jusqu'à 1500 règles d'accès en entrée prises en charge - ACL en fonction de l'heure - Filtrage de l'interface de l'unité centrale Sécurité - SSH v2 - SSL v1/v2/v3 - Sécurité des ports - Contrôle de l'envoi massif de messages par diffusion simple/multicast/unicast - Segmentation du trafic - Safeguard Engine de D-Link - Filtrage NetBIOS/NetBEUI - Filtrage du serveur DHCP - Détection d'usurpation ARP - Protection contre les attaques BPDU AAA - 802.1X - Contrôle d'accès basé sur les adresses Web (WAC) - Contrôle d'accès basé sur les adresses MAC (MAC) - VLAN auxiliaire - Microsoft® NAP - Comptabilisation RADIUS - Compte utilisateur de niveau 4 Fonctions D-Link Green - Conformité aux directives RoHS concernant l'utilisation de certaines substances dangereuses dans les équipements électriques et électroniques - Economie d'énergie grâce à l'évaluation de l'état des liaisons - Economie d'énergie grâce à l'évaluation de la longueur des câbles Administration - Interface utilisateur graphique Web - Interface de ligne de commande - Telnet - TFTP - SNMP v1/v2c/v3 - SNMP over IPv62 - Interruptions SNMP - sFlow2 - ICMPv62 - Journal système - RMON v1/v2 - LLDP - Client BootP/DHCP - Configuration automatique DHCP - Relais DHCP - Images multiples - Configurations multiples - Surveillance du processeur - Commande de débogage - SNTP **** Expédition: L'envoi est effectué sous 24/48h ouvrables à réception de votre paiement. Livraison par la poste Frais de port: Si vous achetez plusieurs objets, je recalcule les frais de port en fonction du poids, la base de calcul est conforme aux tarifs de la poste. **** Votre satisfaction est importante. Si vous avez un problème ou une question concernant votre transaction, merci de me contacter avant de donner une évaluation négative. Une évaluation négative n'a jamais résolu un problème. Je ferai le nécessaire afin de résoudre le litige. Listing and template services provided by inkFrog

Switch Gigabit Cisco Catalyst 3750G-48TS-S V02 + CAB-RPS2300   En parfait état, switch gigabit 48 ports.  GBIC disponibles sur demande. System image file is "flash:c3750-ipservicesk9-mz.122-55.SE12.bin Advanced Layer 3 switching (IPv4 and IPv6) featuresNom du produit Cisco Catalyst 3750G-48TSCatégorie SWITCH - HUB ETHERNETInformations sur le produitGénéralType de périphérique Commutateur - 48 ports - C3 - Géré - empilableCaractéristiques Contrôle du flux, Fonction duplex intégral, Layer 3 switching, auto-détection par dispositif, routage IP, compatible DHCP, auto-négociation, prise en charge d'ARP, prise en charge du réseau local (LAN) virtuel, auto-uplink (MDI-MDI-X auto), IGMP snooping, régulation de trafic, empilable, prise en charge du protocole STP (Spanning Tree Protocol), prise en charge du protocole RSTP (Rapid Spanning Tree Protocol), prise en charge du protocole Multiple Spanning Tree Protocol (MSTP), assistance Dynamic Trunking Protocol (DTP), assistance Port Aggregation Protocol (PAgP), assistance Trivial File Transfer Protocol (TFTP), assistance Access Control List (ACL), qualité de service (QDS), support RADIUS, support d'images étendues, technologie Cisco StackWise, technologie Cisco EnergyWise, Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN)Ports 48 x 10-100-1000 + 4 x SFPRAM 128 MoMémoire flash 32 Mo FlashIndicateurs d'état Vitesse de transmission du port, port mode duplex, utilisation de la bande passante %, système, RPS (alimentation redondante), liaison-activitéProtocole de gestion à distance SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, SSH, CLIProtocole de Routage RIP-1, RIP-2, HSRP, routage IP statique, RIPngMéthode d'authentification Kerberos, Secure Shell (SSH), RADIUS, TACACS+Taille de la table d'adresses MAC 12 000 entréesSupport de cadre Jumbo OuiNombre maximum d'unités dans une pile 9Performances Capacité de commutation: 32 GbpsPerrformances de transfert: 38,7 MppsSous-type Gigabit EthernetNormes de conformité IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1sType de boitier Montable sur rack 1UExtension-connectivitéInterfaces 48 x 10Base-T-100Base-TX-1000Base-T - RJ-451 x console - RJ-45 gestion1 x périphérique réseau empilable x 24 x SFP (mini-GBIC)AlimentationPériphérique d'alimentation Alimentation électrique interneTension requise CA 120-230 V (50-60 Hz)Fonctions Connecteur RPS (alimentation redondante)Consommation en fonctionnement 160 WattLogiciels - Configuration requiseLogiciel(s) inclus Cisco IOS IP BaseDiversFiabilité MTBF 165,243 heuresNormes de conformité Homologué FFC classe A, TUV GS, BSMI CNS 13438 Class A, CISPR 24, cUL, EN 60950, EN55022, NOM, VCCI classe A ITE, IEC 60950, EN55024, UL 60950 Third Edition, CISPR 22, CSA 22.2 No. 60950, CB, FCC Part 15, MIC, AS-NZS 3548Caractéristiques d’environnementTempérature de stockage mini -25 °CTempérature de stockage maxi 70 °CTaux d'humidité en fonctionnement 10 - 85 % (sans condensation)Température maximale de fonctionnement 45 °CTempérature minimale de fonctionnement 0 °CDimensions et poidsLargeur 44.5 cmPoids 6.4 kgHauteur 4.4 cmProfondeur 40.9 cm

.........................................French description below / Descriptif francais plus bas........................................ - Device Type: Switch - 48 Ports - L4 - Managed - Stackable - Enclosure Type: Rack-mountable - 1u - Ports: 48 X 10/100 + 4 X Sfp - Mac Address Table Size: 8k Entries - Remote Management Protocol: Snmp 1, Rmon 1, Rmon 2, Rmon 3, Rmon 9, Telnet, Snmp 3, Snmp 2c, Http, Https, Cli - Encryption Algorithm: Ssl - Authentication Method: Radius, Secure Shell V.2 (ssh2) - Features: Flow Control, Bootp Support, Arp Support, Vlan Support, Igmp Snooping, Quality Of Service (qos) - Compliant Standards: Ieee 802.3u, Ieee 802.3i, Ieee 802.3z, Ieee 802.1d, Ieee 802.1q, Ieee 802.1p, Ieee 802.3x, Ieee 802.1w, Ieee 802.1x, Ieee 802.1s, Ieee 802.1ad, Ieee 802.1ab (lldp) - Ram: 64 Kb - Sdram - Flash Memory: 8 Mb Flash + Rack mounting ears + Power cable The product is functional, some scratches could be present.  3 units are available  the price is for one. International delivery will be made by either Colissimo International / UPS Standard / Chronopost  depending on your country. The package will be tracked and signed. Don't hesitate to contact me for more information.............................................................................................................................................................................. + Oreilles de montage rack +  Cable d'alimentation Le produit est fonctionnel, Il est possible qu'il y est des rayures sur celui ci, les photos sont celles du produit en vente.  3 switchs sont disponibles, le prix est pour l'un d'eux. Envoie en Colissimo suivi. N'hésitez pas à me contacter pour plus d'informations.

comme neuf  très peut servi Serveur NAS VALEUR PLUS DE 600 EUROS IL EST COMME NEUF QNAP - Serveur de Stockage (NAS) - TS-451+-2G - 4 Catégorie SERVEUR STOCKAGE - NAS Référence TS-451+-2G Général Type de périphérique Serveur NAS Connectivité hôte Gigabit Ethernet Périphériques installés / Nbre de modules 0 (installé) / 4 (maximum) Largeur 18 cm Hauteur 17.7 cm Profondeur 23.5 cm Poids 3 kg Appareils intégrés Panneau de voyants Capacité de stockage totale 0 Go Extension/connectivité Interfaces 2 x Ethernet 1000Base-T - RJ-45 2 x USB 3.0 - Type A 2 x USB 2.0 - Type A 1 x sortie HDMI Baies d'extension 4 (total) / 4 (libre) x échangeable à chaud - 2.5" / 3.5" Logements d'extension 2 (total) / 1 (libre) x SO-DIMM 204 broches Réseaux Protocole de liaison de données 10Mb LAN, 100Mb LAN, GigE Protocole réseau / transport TCP/IP, PPTP, L2TP, IPSec, iSCSI, SMTP, FTP, DHCP, Bonjour, SMB, DDNS Compatibilté des services réseau Microsoft Active Directory (AD), protocole Apple Bonjour, DHCP, DDNS, système de fichiers Internet standard Microsoft, système de fichiers distribués NFS, FTP, FTPS, Server Message Block (SMB), protocole AFP, HTTP, HTTPS, Web-based Distributed Authoring and Versioning (WebDAV), SFTP Caractéristiques Liaisons, prise en charge du protocole LDAP, wake on LAN (WOL), prise en charge de Syslog, administrable, alerte messagerie, serveur d'impression, prise en charge d'IPv6, serveur vidéo, possibilité d'évolution vers de nouveaux micrologiciels, serveur proxy, serveur de sauvegarde, client de téléchargement, partage de fichiers, journal des événements, assistance Trivial File Transfer Protocol (TFTP), assistance Access Control List (ACL), support SSH, serveur iTunes, support d'images étendues, serveur DHCP, Serveur FTP, alerte SMS, BitTorrent Client, UPnP Media Server, contrôle de la bande passante, prise en charge IPv4, station de surveillance, prise en charge Teaming, serveur média DLNA, compatible Apple Time Machine, client DHCP, notification par e-mail, sauvegarde sur cloud, serveur VPN, client SFTP, prise en charge SNMP, Apple AirPlay Protocole de gestion à distance SNMP 2, Telnet, SNMP 3, HTTP, HTTPS, TFTP, SSH Algorithme de chiffrement FIPS 140-2, AES 256 bits Normes de conformité DLNA CERTIFIE, UPnP Contrôleur de stockage Type RAID Type d'interface SATA 6Gb/s Niveau RAID RAID 0, RAID 1, RAID 5, RAID 6, RAID 10, JBOD, disque de réserve RAID

Occasion en bon etat: Switch Gigabits D-LINK xStack DGS-3120-48TC. Occasion, en bon etat de fonctionnement, Vendu sans documentation, ni autres accessoires, vous achetez ce que vous voyez sur les nombreuses photos, RIEN DE PLUS. Marque: D-LINK Reference: DGS-3120-48TC Descriptif: La série xStack DGS-3120 est une gamme de switches empilables L2 optimisés pour la connexion des utilisateurs finaux aux réseaux sécurisés de PME ou d'entreprise. Grâce à leur prise en charge complète (empilage physique, multidiffusion et sécurité avancée), ils constituent la solution de couche d’accès Gigabit idéale. Données techniques: épaisseur maximale 25 mm Angle d’hélice 15 à 60 ° position de biseau maximal à 40 kg Force 10 mm Vitesse de travail maximale 2,5 m/min. Coups / minute 500 Puissance 1900 / 1400 W Poids 14,5 kg Alimentation 220 V / 50 Hz Générales: - 44 ports 10/100/1000Mbps - 4 Ports combo SFP - Rackable - Manageable Possibilité d'empilage - Empilage physique (jusqu'à six unités par pile) - Empilage virtuel (jusqu'à 32 unités par pile) - Deux ports d'empilage 10 Gigabit Ethernet Fonctions L2 - Table d'adresses MAC: 16 K - Contrôle de flux - Trame étendue jusqu'à 13 K octets - Protocoles STP: 802.1D STP / 802.1w RSTP / 802.1s MSTP - Détection de bouclage - Agrégation de liens 802.3ad - Mise en miroir des ports - IPv6 Multidiffusion L2 - Surveillance IGMP - Multidiffusion IP limitée - Surveillance MLD VLAN - 4096 groupes de réseaux VLAN - GVRP - Balisage VLAN 802.1Q - VLAN par port - Protocole VLAN 802.1v - VLAN voix - VLAN basé sur les adresses MAC - VLAN ISM - VLAN asymétrique - VLAN privé QoS (qualité de service) - 802.1p - 8 files d'attente par port - Contrôle de la bande passante (par port et en fonction du trafic) Liste de contrôle d'accès (ACL) - Jusqu'à 1500 règles d'accès en entrée prises en charge - ACL en fonction de l'heure - Filtrage de l'interface de l'unité centrale Sécurité - SSH v2 - SSL v1/v2/v3 - Sécurité des ports - Contrôle de l'envoi massif de messages par diffusion simple/multicast/unicast - Segmentation du trafic - Safeguard Engine de D-Link - Filtrage NetBIOS/NetBEUI - Filtrage du serveur DHCP - Détection d'usurpation ARP - Protection contre les attaques BPDU AAA - 802.1X - Contrôle d'accès basé sur les adresses Web (WAC) - Contrôle d'accès basé sur les adresses MAC (MAC) - VLAN auxiliaire - Microsoft® NAP - Comptabilisation RADIUS - Compte utilisateur de niveau 4 Fonctions D-Link Green - Conformité aux directives RoHS concernant l'utilisation de certaines substances dangereuses dans les équipements électriques et électroniques - Economie d'énergie grâce à l'évaluation de l'état des liaisons - Economie d'énergie grâce à l'évaluation de la longueur des câbles Administration - Interface utilisateur graphique Web - Interface de ligne de commande - Telnet - TFTP - SNMP v1/v2c/v3 - SNMP over IPv62 - Interruptions SNMP - sFlow2 - ICMPv62 - Journal système - RMON v1/v2 - LLDP - Client BootP/DHCP - Configuration automatique DHCP - Relais DHCP - Images multiples - Configurations multiples - Surveillance du processeur - Commande de débogage - SNTP ** Expédition: L'envoi est effectué sous 24/48h ouvrables à réception de votre paiement. Livraison par la poste Frais de port: Si vous achetez plusieurs objets, je recalcule les frais de port en fonction du poids, la base de calcul est conforme aux tarifs de la poste. ** Votre satisfaction est importante. Si vous avez un problème ou une question concernant votre transaction, merci de me contacter avant de donner une évaluation négative. Une évaluation négative n'a jamais résolu un problème. Je ferai le nécessaire afin de résoudre le litige. Listing and template services provided by inkFrog En savoir plus Collaboration commerciale.

- Description Description 3Com SuperStack II Switch 3300 with 24 Ethernet Ports HP SuperStack II 3300 24-port Switch Features b'&' Benifits Four SuperStack II Switch 1100 or 3C16980 Switch 3300 units can be interconnected to form a stack that offers unrivaled performance and management features. Each unit has a built-in connector at the rear of the unit called the matrix port. Two units can be connected back-to-back with a SuperStack II Switch matrix cable. To connect more than two units, a SuperStack II matrix module can be inserted into the high-speed module slot of one of the units in the stack, and a matrix cable can be used to connect to each switch in the stack. Stacking provides the user with a plethora of benefits. These include the ability to manage in excess of 100 ports as a single logical entity. Configuration is therefore faster and simpler. Stacking also provides the user with the optional resilient IP addresses across the stack. Thus if a failure should occur, the resilient IP address can be used for management stacking using the SuperStack II Switch matrix module and cable, keeping front panel ports free and increasing the number of matrix ports in an aggregated system. Management Transcend� network management All SuperStack II switches are managed by 3Com Transcend� network management and control solutions. Transcend solutions give you end-to-end visibilityand control over all devices in your network with two levels of management: 1) technologies, such as embedded SmartAgent� software and RMON, within 3Com devices throughout the network, and 2) centralized highly automated applications at the network center for monitoring, configuring, and troubleshooting all devices in the network. Ships with 3Com Transcend Network Supervisor This PC-based application provides powerful, yet easy-to-use network management tuned to the needs of small-to-medium enterprises. Network devices are automatically discovered and network activity and stress monitored through an intuitive graphical interface focused on the tasks and information all managers need to take control of their network. Web-based management Manage your switches with any Web browser, either through direct or dial-up connection or across the LAN. This delivers ease of use and accessibility to network management personnel and reduces in-service costs, but still with full security. Security — Disconnect Unauthorized Device (DUD) LAN security architecture with DUD automatically disconnects unauthorized devices from the LAN. Roving Analysis Port (RAP) RAP allows a network analyzer attached to any unit in a stack to monitor any of the switch ports or virtual LANs (VLANs) in the stack. It also minimizes the time required for problem determination and resolution and maximizes switch uptime, thereby lowering your cost of ownership. RMON support Transcend software’s powerful combination of RMON (Remote Monitoring, a superset of SNMP MIB II) and embedded SmartAgent software reduces the processing burden on your management station, minimizes network traffic, and saves time by automatically monitoring and analyzing your network. RMON tells you at a glance how the network is performing and who is using it the most. And Transcend software gives you the added benefit of RMON features in your network without the processing and memory costs usually associated with RMON. See the At-a-Glance RMON Support table for details on RMON groups supported by SuperStack II switches. Class of Service (CoS) CoS can be defined simply as a method for prioritizing various traffic types. 3Com switches can support two methods of enabling CoS on Ethernet networks. The first method is IEEE 802.1D (incorporating 802.1p), which enables eight levels of prioritization; and the second method is 3Com’s innovative PACE� technology, which allows the user to specify certain applications as high priority. A hardware feature, dual queues, is used to exploit these traffic prioritization schemes; the dual q En savoir plus Collaboration commerciale.

Professionnel vends carte de management APC AP9630 Tarif H.T:   67€ pièce Features and Compatibility ▪IPv6 certified ▪RADIUS support ▪SMTP authentication - SSL/TLS ▪FTP, CLI, Telnet access support ▪Secure SSH and HTTPS access ▪Secure transfer – SCP ▪Simultaneous, multiple user access ▪SNMP v1, v2, v3 support ▪Data and Event logging  ▪Device encryption - Up to 2048-bit   Network Browser and External Device Accessibility Users can monitor and control their APC UPS systems with both secure network browsers and external command line interfaces (either Telnet or Secure Shell) via the APC UPS Network Management Card 2. Users are able to reboot equipment with this accessibility, which saves them from having to dispatch technicians to remote locations.   Multiple-User Access and Multiple-Language Support The management card allows for multiple-user access, which supports simultaneous network web browsing for up to eight users and command line interface browsing for up to three users. It also provides support for up to ten different languages on the network web browser. The card also features password security for individual users, which helps prevent unauthorized access.   Notification of Problems for Quick Resolution With the management card, users will be notified of any problems, which helps them ensure that these issues are dealt with in a timely manner. The card also allows users to customize the shutdown and reboot of equipment and UPS systems.   UPS Firmware Update The management card includes a user friendly mechanism to remotely and seamlessly update UPS firmware via the web browser interface (SMX, SMT and SRT Smart-UPS only).   Data and Event Logging Help Identify Problems The management card features data logging, which identifies problematic trends and exports the data log for analysis. It also allows for event logging, which can pinpoint timing and sequence of events for any problems that need to be investigated.   Compatible With: APC Galaxy VM 160 kVA with Backfeed protection, APC Industrial Panel and DIN Rail UPS with Standard Battery, APC Network Management Card 2 with Environmental Monitoring, Out of Band Management and Modbus, APC Smart-UPS 1000VA USB, APC Smart-UPS 1000VA USB & Serial, APC Smart-UPS 1500VA LCD RM, APC Smart-UPS 1500VA USB & Serial, APC Smart-UPS 2200VA, APC Smart-UPS 2200VA LCD RM, APC Smart-UPS 2200VA USB & Serial, APC Smart-UPS 2200VA XL, APC Smart-UPS 3000VA LCD RM, APC Smart-UPS 3000VA USB & Serial, APC Smart-UPS 750VA LCD RM, APC Smart-UPS 750VA XL USB & Serial, APC Smart-UPS On-Line Li-Ion 1000VA, APC Smart-UPS On-Line Li-Ion 1500VA, APC Smart-UPS On-Line Li-Ion 2200VA, APC Smart-UPS On-Line Li-Ion 3000VA, APC Smart-UPS RM 1000VA USB, APC Smart-UPS RM 1000VA USB & Serial, APC Smart-UPS RM 1500VA, APC Smart-UPS RM 1500VA USB & Serial, APC Smart-UPS RM 3000VA USB & Serial, APC Smart-UPS RM 750VA USB and Serial, APC Smart-UPS RT 1000, APC Smart-UPS RT 1500VA, APC Smart-UPS RT 2000, APC Smart-UPS RT 2200 Marine, APC Smart-UPS SMT 2200VA LCD RM with SmartConnect, APC Smart-UPS SMT1000IC, APC Smart-UPS SMT1500IC, APC Smart-UPS SMT750IC, APC Smart-UPS SRT 1000VA, APC Smart-UPS SRT 1000VA RM, APC Smart-UPS SRT 1500VA, APC Smart-UPS SRT 1500VA RM, APC Smart-UPS SRT 2200VA, APC Smart-UPS SRT 2200VA RM, APC Smart-UPS SRT 3000VA RM, APC Smart-UPS SRT 5000VA RM, APC Smart-UPS VT ISX With 5 Battery Modules, APC Smart-UPS XL 750VA USB & Serial, APC SmartSlot Smart-Signaling UPS Interface Expander, APC Symmetra LX 12kVA Scalable to 16kVA N+1, APC Symmetra LX 16kVA Scalable to 16kVA N+1, APC Symmetra LX 8kVA Scalable to 16kVA N+1, APC Symmetra LX 8kVA Scalable to 16kVA N+1 Extended Run Tower, APC Symmetra LX 8kVA Scalable to 8kVA N+1, APC Symmetra PX 10kW Scalable to 80kW N+1 with Premium XR Battery, APC Symmetra PX 20kW Scalable to 80kW, N+1 with Premium XR Battery

Monitor TV Tactile NEC MultiSync® V652-TM Camera Touch UHD 65"OPS PC signage. État : "Reconditionné par le vendeur" NEC MultiSync ® V652-TM is the new multi-touch product of NEC’s V Series boasting 65" in size and delivering true multi-touch support with up to 5 simultaneous touch points. Thanks to a unique anti reflective coating, reflections are reduced to a minimum which significantly increases the readability of the content shown.  The OPS option slot for e.g. a slot-in PC helps to save space and does away with any cables including the USB cable external PC solutions may need. V652-TM is ideal for retail signage, conference room and education applications delivering short response times and a high level of accuracy. Benefits Comprehensive Touch Usage – possible usage with Finger, Stylus and Gloves. Multi-Touch – true multi-touch support with up to 5 simultaneous touch points, gesture control for Windows 7/8, Mac and Linux driver support. Optical Camera Technology – with 4 integrated cameras for quick touch response and perfect usability. Infrared Touch – offering quick touch response and perfect usability. Protective Glass – double anti-reflection coating for perfect visibility, full-tempered glass for security. Future Ready with OPS Cable Free Expansion – upgrade the power of your display at any time while seamlessly integrating one of our various Slot-in PCs, signal interfaces and other OPS compatible products without the need for external cables or devices. Free Download of Multi-Display Management Software – with NaViSet Administrator 2 you can manage all your connected display devices from a centralised location. DICOM support – for medical applications. Product Information Product Name NEC MultiSync ® V652-TM (Optical Camera Touch) Product Group LCD 65" Value Large Format Touch Display Order Code 60003553 Display Panel Technology AMVA3 with Edge LED backlights Active Screen Area (W x H) [mm] 1,428.5 x 803.5 Screen Size [inch/cm] 65 / 165 Aspect Ratio 16:9 Brightness [cd/m²] 450, 173 Eco (shipment setting) Contrast Ratio (typ.) 4000:1 Viewing Angle [°] 89 horizontal / 89 vertical (typ. at contrast ratio 10:1) Response Time (typ.) [ms] 8 (grey-to-grey) Panel Refresh Rate [Hz] 60 Synchronisation Rate Horizontal Frequency [kHz] 31.5 - 91.1 (analog and digital) Vertical Frequency [Hz] 25.2 - 85 Resolution Native Resolution 1920 x 1080 at 60 Hz Supported Resolutions 1920 x 1080; 1680 x 1050; 1600 x 1200; 1400 x 1050; 1366 x 786; 1280 x 1024; 1280 x 960; 1280 x 800; 1280 x 768; 1280 x 720; 1024 x 768; 800 x 600; 720 x 576; 720 x 400; 640 x 480 Supported on digital inputs (Video) 1920 x 1080i (59.94/60)16:9; 1920 x 1080i (50)16:9; 1920 x 1080p (59.94/60)16:9; 1920 x 1080p (50)16:9; 1920 x 1080p (23.97/24)16:9; 1920 x 1080p (25)16:9; 1920 x 1080p (29.97/30)16:9; 1280 x 720p (59.94/60)16:9; 1280 x 720p (50)16:9; 720 x 576p (50)16:9; 720 x 480p (59.94/60)16:9 Connectivity Input Video Analogue 1 x D-sub 15 pin; Composite (BNC); RGBHV for PC and Component/Composite (BNC) Input Video Digital 1 x DisplayPort (with HDCP); 1 x DVI-D (with HDCP); 1 x HDMI 1.3 (with HDCP) Input Audio Analogue 1 x 3,5 mm jack Input Audio Digital 1 x HDMI; DisplayPort Input Control LAN 100Mbit; remote control wire (3,5mm jack); RS232 Output Video Digital 1 x DVI-D (with HDCP) Output Audio Analogue 3,5mm jack Output Control RS232 Remote Control LAN with SNMP; Remote Control IR (internal/external (optional) sensor); RS-232C (9-pin D-sub) Input and Output Open Modular Intelligence OPS Slot Slot Technology: Open pluggable specification (NEC / Intel OPS standard) Inrush Current [A] max. 10 Power Consumption [W] max. 61 Voltage / Current [V/A] 16/4 Electrical Power Consumption Eco/max. [W] 178 Eco (shipment setting), 255 Power Savings Mode [W] Power Management VESA DPMS Environmental Conditions Operating Temperature [°C] +0 to +35 Operating Humidity [%] 20 to 80 Storage Humidity [%] 10 to 90 Storage Temperature [°C] -20 to +60 Mechanical Dimensions (W x H x D) [mm] Without stand: 1,540.4 x 909.2 x 102 Weight [kg] Without stand: 68.3 Bezel Width [mm] 50.5 (top and bottom); 53.5 (left and right) VESA Mounting [mm] 4 holes; 400 x 400 (FDMI); M8 Ingress Protection IP40 (front); IP20 (back) Touch Touch Technology Optical Camera with 4 Cameras Protection Glass 5 mm, double sided anti-reflection, fully tempered Touch Method Finger; Gloves; Stylus Supported Operating System 1 touch point: Windows XP, Mac OS, Linux; 4 touch points: Windows Vista; 5 touch points (incl. gesture control): Windows 7, Windows 8 Data Interface RS323; USB-HID Light Transmission [%] 96 Reflection Rate [%] 2 Available Options Accessories Feet (ST-651); Speaker (SP-RM1); Trolley (PDMHA, PDMHM-L); Wall mount (PDWHM-L, PDW T XL) Option Slot HD-SDI 1.5 and 3G, Intel Core i5 and i7; Slot-in PC (Core i5/7 with WS7P recommended) Green Features Energy Efficiency Ambient light sensor; Annual energy consumption: 260 kWh (based on 4 operating hours per day); Carbon savings meter; ECOMode; Energy efficiency class: B Ecological Materials Manuals on CD; Optional feet Additional Features Special Characteristics Advanced fan control; Automatic Alarm E-Mails; Copy display settings through RS232; DICOM Simulation; Hardware colour calibration possible; Input name adjustment; Matrix memory; PIN as theft protection; Rapid input switching; Scheduler; Screen saver functions; TileMatrix (10 x 10); User input priority definition; Various picture in picture options Colour Versions Black Front Bezel, Black Back Cabinet Safety and Ergonomics C-tick; CE; FCC Class B; PSB; RoHS; TÜV GS; UL/C-UL or CSA; VCCI Audio Integrated Speakers (10 W + 10 W); Optional Speakers (15 W + 15 W) Shipping Content CD-ROM (User Guides/Manuals); Display; DVI-D cable; Free LAN control software (download); Power Cable; Remote Control; USB cable Warranty 3 years warranty incl. backlight Operating Hours 16/7

.........................................French description below / Descriptif francais plus bas........................................ summary The HP E2610 Switch Series consists of five switches. The HP E2610-24 and E2610-48 provide 24 and 48 ports of 10/100 connectivity. The HP E2610-24 is fanless switch with quiet operation, making it ideal for deployment in open spaces. The HP E2610-24-PPoE, E2610-24-PoE, and E2610-48-PoE are IEEE 802.3af-compliant for Power over Ethernet (PoE) and provide up to 15.4 W for 12, 24, and 48 ports. The E2610-24-PPoE switch has 24 10/100 ports and provides 12 ports of PoE. All HP E2610 Switch Series include two 10/100/1000Base-T ports and two mini-GBIC slots for Gigabit uplink connectivity. An optional redundant external power supply is also available to provide redundancy in the event of a power supply failure. With static routing, robust security and management features, free lifetime warranty, and free software updates, the HP E2610 Switch Series is a cost-effective solution for customers who are building converged enterprise edge networks.  Related products Technical SpecificationsConnectivityRouting/switching capacity17.6 GbpsNetworkingAddress table size8000 entriesManagement featuresHP PCM+; HP PCM (included); command-line interface; Web browser; configuration menu; out-of-band management (serial RS-232C)Device managementHTML and telnet managementGeneral protocolsIEEE 802.1D MAC Bridges; IEEE 802.1p Priority; IEEE 802.1Q VLANs; IEEE 802.1v VLAN classification by Protocol and Port; IEEE 802.1w Rapid Reconfiguration of Spanning Tree; IEEE 802.3ad Link Aggregation Control Protocol (LACP); IEEE 802.3af Power over Ethernet; IEEE 802.3x Flow Control; RFC 768 UDP; RFC 783 TFTP Protocol (revision 2); RFC 792 ICMP; RFC 793 TCP; RFC 826 ARP; RFC 854 TELNET; RFC 951 BOOTP; RFC 1542 BOOTP Extensions; RFC 2030 Simple Network Time Protocol (SNTP) v4; RFC 2131 DHCP; RFC 3046 DHCP Relay Agent Information OptionIP MulticastRFC 3376 IGMPv3MIBsRFC 1213 MIB II; RFC 1493 Bridge MIB; RFC 1573 SNMP MIB II; RFC 2021 RMONv2 MIB; RFC 2096 IP Forwarding Table MIB; RFC 2613 SMON MIB; RFC 2618 RADIUS Client MIB; RFC 2665 Ethernet-Like-MIB; RFC 2668 802.3 MAU MIB; RFC 2674 802.1p and IEEE 802.1Q Bridge MIB; RFC 2737 Entity MIB (Version 2); RFC 2863 The Interfaces Group MIBNetwork managementIEEE 802.1AB Link Layer Discovery Protocol (LLDP); RFC 3164 BSD syslog Protocol; RFC 3176 sFlow; ANSI/TIA-1057 LLDP Media Endpoint Discovery (LLDP-MED); SNMPv1/v2c/v3SecurityIEEE 802.1X Port Based Network Access Control; RFC 1492 TACACS+; Secure Sockets Layer (SSL); SSHv1/SSHv2 Secure ShellLatency100 Mb Latency: