SMARTWI LITE (ORIGINAL VERSION) AVEC 3 CARTES EN FRANCE

SMARTWI Lite (original version) avec 3 cartes. État : Occasion https://smartwi.net/downloads-for-smartwi-lite/ Aucune garantie n'est donnée sur le bon fonctionnement sur votre installation. The basic components of the the SmartWi Multi room Solution are the TV signals, the set-top box/decoder, the SmartWi Master, the SmartWi client/slave cards and at least two TVs in a normal home. You will need an external or in-built decoder with a card reader for each TV – and SmartWi normally supports at least five TV sets in a household. The function of a SmartWi is somewhat similar to wireless internet router – with a password for protection – only the SmartWi does not broadcast a signal as the internet router, thus the technical term cardsplitter or access point, or simply a wireless switch box. During normal operation the TV-signals go into the decoder unit where pictures, sound and text is decoded and displayed on the TV. However, in pay-TV a small, encrypted signal is included in the stream app. every 10 seconds. This must be decoded by the decryption key stored in the viewing card from your provider in order to continue operation. With the SmartWi Multi room Solution the viewing card is inserted into the SmartWi Master, and a client/slave card is inserted into each decoding unit. When each decoder receives the encrypted signal, this is instantly transmitted wireless to the Master with the provider viewing card – with a request for the correct ‘answer’ to the request. This is processed in the smart card exactly as if the smart card were still in the decoder unit, and subsequently transmitted to each client/slave card – and the signal flow continues without interruption. The initial installation ‘pairs’ each client card with the Master and this protects the signals against intruders from the neighbourhood. Also, the range of the wireless transmission is normally not more than 15 meters.   https://smartwi.net/downloads-for-smartwi-lite/