TALKIE WALKIE GRANDE PORTÉE PRO ALINCO (2 POSTES) EN FRANCE

Le prix indiqué comprend 2 appareils, très peu utilisés. Permet des liaisons grande distance, idéal pour randonneurs. Mode d'emploi en français et anglais fournis. Boîtes d'origine Fonctionne avec 3 piles ou batteries AA Caractéristiques: Frequency Coverage MHz   (RX)  (TX) MHz  Channel Spacing   KHz steps  Memory Channels   20 Channels + 1 Call Channel Memory  Antenna impedance   50 ohms unbalance  Frequency Stability   ±5 ppm  Microphone input impedance   2 kohm nominal  Signal Type   F3E (FM)  Power Supply Requirements   3.6V ~ 4.5V DC (4.5V standard with 3 AA batteries)  Current Consumption at 4.5V   Transmitting: Approx. 260mA  (High Power Receiving: Approx. 33mA Squelched)  Ground   Negative  Operating Temp. range   -10 to +60°C  Dimention w/o projection   2-1/6(W) x 4(H) x (D) Inches  Weight   Approx. 6.5oz. (Batteries Included)  Sub Audible Tones   Encoder Installed (50Tones)   Transmitter  Power output   High: Approx.340mW  Low:Approx. 50mW  Modulation System  Variable reactance FM  Max. Deviation  ± 5kHz  Spurious Emission  -60dB Or Under Below Carrier Level  Tone Frequency  67.0 to Hz (50 Selections)  Microphone  Electret Condenser  Operating Mode  Simplex/Semi Duplex 5KHz Steps Minimum Between MHz  CTCSS Encoder   Built-In And IncludedAs Standard   Receiver  Receiver System   Super Heterodyne Dual Conversion  Sensitivity   12dB SINAD: Less Than -15dBu at MHz  Squelch Sensitivity   Less Than -17dBu  Intermediate Frequency   1st IF: MHz  2nd IF: 450KHz  Selectivity  More Than +/- 7.5KHz at -6dB  Audio Output  More Than 100mW @ 10% THD  Speaker Impedance  8 ohms