YAMAHA MATRIX PROCESSEUR MTX5-D - MATRICE PROCESSEUR - EN FRANCE

Yamaha Matrix Processeur MTX5-D - Matrice Processeur - Excellent état Série MTX - Caractéristiques techniques - Processeurs - Audio professionnel - Produits - Yamaha - France MTX5-D (yamaha.com)   MTX5-D Mixing capability Mixing channels Mixing Channel: 16 Mono + 3 Stereo + 2 Effect Return + 8 Direct-in to Matrix Input channel functions Mono CH: 3-band PEQ, Comp, Gate, Auto Gain Control, Feedback suppressor (available in ch 1-8) Output channel functions Room Delay, Room EQ, Speaker Processor, X-Over (1way,2way), Delay, 6-band PEQ, Limiter I/O Phantom power +48V Internal processing Priority Ducking, Ambient Noise Compensator Sampling frequency rate Internal 48kHz/ 44.1kHz Signal delay Less than 3.0ms (AD-DA @48kHz) Total harmonic distortion Less than 0.05% (+4dBu, Gain:-6dB), Less than 0.1% (+4dBu, Gain:+66dB) Frequency response 20Hz to 20kHz, +0.5dB, -1.5dB Dynamic range 107dB (Gain:-6dB) Hum & noise level Equivalent input noise -60dBu (Gain ： +66dB), -83dBu (Gain ： -6dB) Crosstalk -100dB Heat dissipation 55.9kcal/h max Power requirements AC100V-240V 50Hz/60Hz Power consumption 65W Dimensions W 480mm (18.9") H 88mm (3.4") D 351mm (13.9") Net weight 6.3kg (13.9lbs) Others Memory bank: PRESET 50 ·          * Total harmonic distortion is measured with a 18dB/Oct fi lter @80kHz. ·          * Hum & noise level is measured with a 6dB/oct fi lter @12.7kHz;equivalent to 20kHz fi lter with infi nite dB/Oct attenuation. AnalogInput Specifications Input terminal GAIN Actual load impedance For use with nominal Input Level Connector Nominal Max. before clip INPUT 1-8 +66dB 10kΩ 50-600Ω Mics & 600Ω Lines -62dBu -42dBu Euroblock -6dB +10dBu +30dBu ST IN 1,2 - 10kΩ 600Ω Lines -10dBV +10dBV RCA Pin Jack AnalogOutput Specifications Output terminal Actual Source impedance For use with nominal Output Level Connector Nominal Max. before clip OUTPUT 1-8 75Ω 10kΩ Lines +4dBu +24dBu Euroblock DigitalInput and Output Specifications Terminal Format Level IN/OUT Connector Note YDIF In YDIF RS-422 16IN RJ45 YDIF Out YDIF RS-422 16OUT RJ45 Primary Dante 1000BASE-T 16IN/16OUT RJ45 MTX5-D Only Secondary Dante 1000BASE-T 16IN/16OUT RJ45 MTX5-D Only ControlI/O Specifications Terminal Level Connector MTX5-D GPI 16 IN / 8 OUT IN 1-15ch: 0-5V 16ch: 2.5-24V: High, 2.5V or less, Allowable input +24V Euroblock OUT Open Collector +V DC5V MTX5-D REMOTE RS-232C (BAUD RATE: 38.4kbps or 115.2kbps) D-sub 9pin (Male) DCP - RJ-45 Exi8/Exo8 Specifications   EXi8 EXo8 Sampling frequency 48kHz/44.1kH Signal delay Less than 2.5ms Total harmonic distortion Less than 0.05% (+4dBu, Gain:-6dB); less than 0.1% (+4dBu, Gain:+66dB) Frequency response 20Hz to 20kHz, -1.5dB min, 0dB typ., +0.5dB max Dynamic range 107dB (Gain:-6dB) Equivalent input noise (EIN) -126dBu (Gain: +66dB) Phantom power +48V (per channel; individually settable) Crosstalk -100dB (@1kHz) Heat dissipation (per hour) 21.5 kcal max. Power supply voltage 100V 50/60Hz Power consumption 25 W max. Dimensions (W x H x D) 480(W) x 44(H) x 351(D)mm, 1U 480(W) x 44(H) x 351(D)mm, 1U Included items Power cord, Euroblock plugs (3-pin, tabbed) x8 EXi8Analog Input Specifications Input terminal GAIN Actual load impedance For use with nominal Input Level Connector Nominal Max. before clip INPUT 1-8 +66dB 10kΩ 50-600Ω Mics & 600Ω Lines -62dBu -42dBu Euroblock -6dB +10dBu +30dBu EXi8Digital Input Specifications Terminal Format Level IN/OUT Connector YDIF In YDIF RS-422 16IN RJ45 EXo8Analog Output Specifications Output terminal Actual Source impedance For use with nominal Output Level Connector Nominal Max. before clip OUTPUT 1-8 75Ω 10kΩ Lines +4dBu +24dBu Euroblock EXo8Digital Output Specifications Terminal Format Level IN/OUT Connector YDIF Out YDIF RS-422 16OUT RJ45 Exi8 /Exo8 Control I/O Specifications Terminal Format Level Connector Network Ethernet 100Base-TX - RJ-45