And high power transmitter will

Lumedyne system 244.used power pack 065 in perfect working order.2x200w. auction is for 1x power pack 065 only Lumedyne 065 - 200 Watt/Second Fast Power Supply - gently used Lumedyne is synonymous with modular, portable strobe systems. There are four basic components to a complete Lumedyne system: the Power Pack, Battery, Charger and Flash Head. Lumedyne offers many different options within these components to customize the system to the photographer's individual needs. There are two types of Classic Power Packs, 200 w/s or 400 w/s. The 200 w/s packs have catalog # code 065 and the 400 w/s packs have catalog # code 067. Both power levels offer various styles of packs differing in recycling speed and features. The packs with catalog #'s that end with the letter "X" are the Fast Series that will recycle in 5 seconds @ the 400 w/s power setting.  Threaded Inserts for Belt Clip Pre-tapped holes allow a belt clip or any other accessory to be installed easily. Power and Flexibility Increased with Booster Modules Simply add on 200 w/s or 400 w/s booster modules up to a total of 2400 w/s. Asymmetrical Distribution A separate power switch enables the photographer to vary the power distribution between different flash heads when using Booster Modules. Recycling Time Decreased with High Speed Modules High Speed Modules enable the fastest recycling times. Optional Power Adapters A variety of AC adapters, and a vehicle adapter are available. 100% Charge Recycle Indication Lights up during recycling and goes out only @ 100% charge. Maximum Watt/Seconds 200 w/s Guide Number 113 @ 10', ISO 100 Recycle Time 2.5 seconds @ 200 w/s Distribution Symmetrical, or Asymmetrical, with Booster Flash Ready Indicator Yes Built-in Slave No Auto Dump Yes Fan Cooled No Number of Flashes Determined by the removable battery in use Battery Charge Time Determined by the battery, and the charger used Dimensions 5 x 3 x 7.4" (12.7 x 7.6 x 18.7cm) Weight 2.3 lbs. (1.04Kg)   The unit has been tested and it is in good working order

Broadcast Transmitter 1000W DSP PLL STEREO FM. État : "Occasion" Service de livraison : Livraison en Relais Mondial Relay Introduction: - This is the FMT series three generation product, using DSP+PLL technology, better sound quality. - Upgrade frequency step to 5Khz. - Professional radio power tube  MRFE6VP61K25H or BLF188. - We are RF manufacturers, if you need a lot, please contact us, we will provide the best price. - Standard 19 inches, 2U whole aluminum case. - Exquisite craftsmanship. - Particular materials, such as whole aluminum adjusting knob. - Wiredrawing and oxidation makes surface bright, clean and elegant. - LCD touch screen displays working frequency, volume, FETMOS temperature, forward power and SWR. - Provided with the series of protection function, own active protection and raise alarm prompts once meet any trouble while working. - Accurate operating index and perfect protection measures make you are more aware of the operating status of your machine. - Easily installation and simply operations. - High quality and excellent technical performances. - Each machine has been examined strictly by a series of quality inspection and function test to guarantee best operating function. Technical Specification    -  RF Output Power: 0 to 1000 Watt ±10% , 1W/Step  - Frequency range: 87.5-108 Mhz, 5Khz/Step - AC power source: AC110V~240V,50-60Hz, single phase - Frequency Stability: better than ±100Hz - S/N Ratio: More than 60dB - Distortion: less than 0.1% - Modulation: FM,±75KHz peak deviation - Transmission Signal: FM Stereo or Mono - Tuning Design: Stable PLL Technology - Harmonic suppression: - Stereo Separation: More than 50db - RF Output Connector: N Type (L16) -female - RF Output Impedance: 50 ohm - Audio channel Frequency Response: 50 - 15000Hz ±0.5dB - Audio Input Level: -15db, Max -30db - Audio Input Connector: RCA type - AUX Input Connector: none - Operating temperature range: -10 to 45 ℃ - Size of Transmitter Unit: 483mm * 400mm * 88mm (19" Standard 2U case) - Shipping Weight: 11.5Kg

Paire pentodes 807 de puissance à faisceau dirigé Hytron - NOS ref militaire VT-100 (Usage militaire Tube de sortie puissance d'antenne émetteur ex: JUpiter ER504) Usage en triode possible en couplant Anode et grille 2 Pentode de puissance de sortie  refroidissement à air Ce tube a été construit dans les années 50, il est de qualité militaire US Ce tube a été testé 100% OK comme NOS sur Funke W19 fiche N° 818   Caractéristiques: - Chauffage indirecte 6.3 volts 0,9 Ampère - Culot UX 5 - Va 600 volts maxi à 15 MHz - puissance utile: 30 à 40 Watt sous 60 MHz et 145 à 20 W à 125 MHz. - Sans refroidissement air forcé la dissipation anodique est de 25 watts (usage HIFI) - Débit plaque maxi 75 mA en class B Usage typique class AB1 power amplifier en mode triode: Tension anodique 400 volts Grille 2  400 volts couplée à anode Grille 1 de commande borne de tension: - Polarisation - 45 volts - Tension BF crête G1 90 volts  - courant anode au repos 60 mA et 140 mA au maxi excitation BF. Puissance de sortie 15 watts Résistance anodique 3000 ohms Le tube proposé sera livrés dans sa cartonnerie d'emballage militaire collectif Groupez vos achats dans notre boutique cotatel1 pour réduire les frais de port par objet Bonnes emplettes One pair 807 beam power pentode Hytron (NOS) Military VT-100 Ref (Military Use Jupiter ER504 Transmitter Antenna Output power tube) Triode use possible by coupling Anode and grid 2 Pentode power output air cooling This tube was built in the 50s, it is US military grade This tube has been tested 100% OK as NOS on Funke W19 sheet N ° 818 Characteristics: - indirect heating 6.3 volts 0.9 amps - UX5 Base - Va 600 volts Max 15 MHz - useful power: 30 to 40 Watt at 60 MHz and 145 at 20 W at 125 MHz. - Without forced air cooling the anodic dissipation is 25 watts (use HIFI) - Max flow rate 75 mA in class B Typical use class AB1 power amplifier: - anode and G2 voltage 400 volts - grid G1 control voltage terminal: - Polarization - 45 volts - BF G1 peak voltage 90 volts - anode current at rest 60 mA and 140 mA at maximum excitation LF. - Power output 15 watts - Resistance anodic 3000 ohms The proposed tube will be delivered in its collective military packing box Group your purchases in our shop ! Happy shopping

In perfect working condition and aesthetic, comes with remote control, power cable and manual. No box but will be extremely well packaged. Beautiful equipment, very flexible and elegant, exceptional sound. The only 'downside' is the discoloration of the volume knob (a well-known problem if you do a research), but that obviously does not impact the operation and didn't bother me at all! r e m u s i c. i t /EN/Bel-Canto-DAC25-processor-80784100 b'"'In conclusion, I can say that the Bel Canto 2.5 is a DAC of absolute modernity. For the quality of its sound, the superb engineering and the ability to handle analog sources, it represents an incomparable article in terms of versatility.b'"' a u d i o p h i l i a. c o m / reviews/2016/5/24/the-bel-canto-dac25-dac-controller b'"'I’ve experienced digital done right. The Esoteric and dCS gear I’ve heard are knockouts. And crazy expensive. Got the dosh? Go ahead. You can't beat them. But this bel canto DAC is less than 2K! It’s a lifetime DAC and worth twice the price. You won’t need anything else for a long time. And, you can sell your preamp to buy it! In the here and now, this exceptional US$1,999 DAC will be staying in my system for a while. And, I’ll enjoy every minute with it. Very highly recommended.b'"' The $2000 Bel Canto is an excellent PCM digital audio converter, and while it is not exactly cheap as a standalone DAC, given the features it offers, it would be difficult to give the DAC 2.5 less than a high five. The DAC 2.5 is an incredibly versatile music machine. Thanks to its stereo RCA analog input, the 2.5 can be used as an analog preamp. It features 24-bit digital volume control and a host of connection options. In addition to built-in USB, a host of 24-bit/192kHz compatible inputs (Toslink, AES/EBU, S/PDIF) share the rear panel with XLR and RCA analog outputs. There is also a front-mounted 1/4b'"' headphone jack for the dedicated headphone amp. It took me a while, but I finally put my finger on a key attribute of the Bel Canto: it digs deep into the music, reconstructing a sonic image that is sometimes very bright and always transparent. The smoothness of the sound is just enough to give you a tube feel, but the Bel Canto is completely solid-state. It is very easy to get lost in the music the Bel Canto is presenting to you. I have thrown a ton of music at the Bel Canto and it just presents it beautifully. The detail in the music is just insane. I mean, it is so detailed without being analytical at all with a nice slightly warm character... a nice rich midsection and great extension in the bass and treble. I think it was really musical, with a really high-end rhythm. New value 2100 euros Analog DAC section 24/192: Maximum output: 4 Vrms balanced XLR, 2 Vrms RCA Output impedance: 200 ohms balanced XLR, 100 ohms RCA Frequency response: 20 Hz-20 KHz, +/- 0.5 dB THD+N: b' Output noise: 3.3 uVrms A-weighted 20 Hz-20 KHz Dynamic range: 122 dB A-weighted 20 Hz-20 KHz Analog ADC section 24/192: Maximum input: 2.5 Vrms RCA Input impedance: 12 kohms RCA THD+N: 0.003%, 2.5 Vrms input, 1 kHz Dynamic Range: 110 dB, A-weighted 20 Hz-20 KHz Headphone Section: Maximum Output: 138 mW THD+N: 0.01% 35 mW, 1 KHz Output Noise: 17 uVrms, A-weighted 20 Hz-20 KHz General: Power Consumption On: 7 W Power Consumption Off: 0.0 W Power Requirements: 100-120 VAC, 220-240 VAC 50/60 Hz Dimensions: 216 mm x 318 mm x 88 mm (8.5 in W x 12.5 in D x 3.5 in H) Weight: 6.5 kg (14 lbs) Auralic, nuprime, rme, eversolo audio gd, Singxer, schiit, Arcam / teac / marantz / denon / yamaha / onkyo / atoll / nad / musical fidelity / gustard / ifi / monitor audio / klipsch / ifi / AudioQuest / Astell b'&' Kern / iBasso / Hidizs / Fiio / Shanling / beyerdynamic / meze / hifiman / audio technica / akg / bel canto / violectric / lehmann / parasound / benchmark / auralic / burson / aune / Arcam, Benchmark, Einstein, Pass, Mark Levinson, ifi, Eversolo, Fidelice, Mytek, Hegel, Nuprime, Auralic, Rupert Ne En savoir plus Collaboration commerciale.

Yongnuo YN568EX II is a powerful unit compatible with Canon cameras that have E-TTL / E-TTL II control. It features a guide number of 58m at ISO 100 and 105mm for illuminating your subject along with a zoom head with coverage from 24-105mm. Also, the flash can tilt from -7 to 90° and rotates 270° for versatility in bouncing your light. Newly released Yongnuo Flash Speedlite YN-568EX II version is a flash similar to YN-565EX in terms of features, plus some huge upgrades on the new YN-568EX II making it a much more capable tool for digital flash photography, both in the camera hot shoe and in wireless mode. This unit is capable of wireless master/slave TTL functionality when used with other flashes. The YN-568EX II is portable by running on 4 AA batteries and it can recycle in approximately 3 seconds. Other features packed into this flash include 2nd-curtain sync, HSS and a multi-mode. Additionally, it has a PC sync port for remote triggering and comes with stand. Features - Yongnuo YN568EX II supports High-Speed Synchronization – YN568EX II is the first speedlite which supports high-speed synchronization; with high-speed sync (FP flash), the YN568EX II can synchronize with all shutter speeds. The maximum shutter synchronization speed is up to 1/8000. - Compatible with Nikon and Canon wireless flash system – One YN568EX II is able to respectively accept internal flashing of YN568EX II, 580EX II, SB-910/900/800/700, 7D/60D/600D, Canon commander of Nikon’s built-in flashing and ST-E2 wireless signal, achieves off camera TTL and manual flashing. Some functions such as wireless TTL flashing, grouping light ratio TTL flashing and the illumination of remote controlled flashing can be easily achieved only if you carry a camera with built-in flash commander and YN568EX II. - High Guide Number TTL + High Speed Sync – GN58@ ISO100, 105mm; which reaches the level of the mainstream hot shoe flashes, supports HSS, TTL/M/Multi mode. - Multiple triggering mode supported – The YN568EX II can be triggered by the camera set-top, built-in or main-controlled flashing command, S1 and S2 (pre-flash-canceled mode). - Supports auto/manual zooming – The covered focal length can be changed between auto, 24～105mm on the lamp adapter by operating the zoom button on the flash light, supporting full-frame/APS-C cameras. - Comprehensively supports TTL functions – The YN568EX II supports HSS, FEC, FEB, Rear-curtain sync (2nd curtain sync), FE lock, Modeling Light, Canon camera menu accessible - Extreme speed of charging recycle – The time for full power output current-return takes just 3 seconds; you can get fast current-return experience even without brand-new batteries, which takes just 4~5 seconds. - Equipped with 2.5mm PC Synchronisation interface – It makes things easier on lightening the flashlight synchronously by using PC synchronisation port. - Sound prompting system – When the sound prompting system is enabled, the different sound alerts will prompt different working conditions of the flashlight allowing you to focus on shooting. - Aperture preview – Press the camera’s aperture preview button, the YN568EX II will send out continuous flash lasting one second for subjects imaging. - Advanced options function – The YN568EX II has advanced options setting function, where you can self-define the functions of the flashlight to suit your own requirements. - Automatic saving settings – YN568EX II can automatically save your current operating settings to convenient your next use. - LCD display interface, decent appearance - Metal hot-shoe stand, solid and reliable Specifications High-speed SyncThe max. sync speed is 1/8000sGuide No.58 meters (ISO 100, 105mm)Flash modeHigh-speed Sync HSS,TTL, M, MULTIWireless triggerN’s b'&' C’s wireless system, S1, S2 pre-flash-canceled modeWireless triggering distance20~25m indoor, 10~15m outdoorSlave groups3(A, B, and C)Channels4Zoom range24,28,35,50,70,80,105mmVertical rotation angle-7~90 degreesHorizontal rotation angle En savoir plus Collaboration commerciale.

    iFi Audio Micro iDSD DAC and Headphone Amp - with Pre amp Variable out. There is nothing like the micro iDSD. It is literally, out of this world. It is the only DAC in the world (at any price) to play True Native Octa-DSD512/PCM768/Double DXD. Its Perfect-Match means it can be fine-tuned to any headgear from IEMs all the way through to large headphones. Its 8v/4000mW output makes it one of the most powerful headamps to drive even the most hungry of headphones with ease. iFi has forged an enviable reputation for being at the forefront of computer audio technology. The micro iDSD has just made another leap, an Octa-Leap to be precise. With its special Dual-Core Burr-Brown native DSD/PCM chipset at the heart, the micro iDSD is capable of True Native PCM768, Octa-Speed DSD512 and 2x DXD; it is simply out of this world. The micro iDSD has 3 different power modes Eco, Normal and Turbo. Capable of 4000mW, 1000mW or 250mW, the micro iDSD is able to drive the full gamut of headphone and amplifiers alike. With iEMatch there to dial to suit any IEM, the micro iDSD has redefined the headphone amplifier class. Used along with the analogue volume control, the diminutive size of the micro iDSD belies its uncanny ability to drive virtually anything and everything! SmartPower® is the micro iDSD’s onboard recharging feature for Smartdevices. Its 4800mAH battery is able to fully recharge an iPhone two-times. Compatible with Apple and Android, phones and tablets, it is another example of iFi’s commitment to customer needs – enjoy high-end audio on the go without worrying about the phone going flat. iFi’s iCAN and iTube have already achieved widespread acclaim, so much so that their core features including 3D Holographic and XBass have become renowned in their own right and imitated by others. In the micro iDSD, for the first time in an iFi product, it features XBass and 3D Holographic for Headphones and Speakers. All these features are still executed in the analogue, not digital domain to preserve the original music format. And so much more….with the amazing Crowd-Design program, we are over the moon that you, the customer was central to the development of the micro iDSD. The micro iDSD is literally bursting with features – such as Direct/Pre-Amp, 3.5mm input, SPDIF Input/Output and much, much more. You will have to see it to believe it.   Specifications:     Item Description Remarks Inputs/Outputs     Inputs (rear) USB 2.0 type A “OTG” Socket (with iPurifier® technology built-in) Compatible with computers (Apple/Win/Linux), iPhone, iPod Touch, iPad and Android Devices, camera kit or USB-OTG cable required. (Full USB3.0 port compatible)   Intelligent SPDIF® Coaxial 3 Way combo SPDIF port (Coaxial In/Out; Optical In); Up to 192kHz PCM   SPDIF Optical         Outputs (rear) Audio RCA L+R     Intelligent SPDIF® Coaxial Up to 192kHz PCM       Output (right side) SmartPower® Socket Fast charge all portable devices. Compliant with USB Battery Charging Standard 1.2 – 5V @ 1.5A             Controls     Controls (front)     - HP Output Audio 6.3mm Headphone Jack   - Volume with Power On/Off switch Precision analogue volume control - 3.5mm Input   Auto disable the digital section when this is in use - X-Bass® On/Off   - 3D Holographic Sound® On/Off Auto-switching for Speakers® and Headphones® (two separate and distinct circuits)       Controls (left side)     - Power Mode Turbo, Normal, Eco Computer controlled power and gain scaling - Polarity Normal/Inverted   - Filter 3 positions, 6 filters (see filter section below)       Controls (bottom)     - Line Direct/Preamplifier Preamplifier function Enable/Disable, 0/9dB gain selectable Fixed 2V or variable with up to 5V available - iEMatch® Perfect-matching circuit for IEMs (eliminate hiss) Off / High Sensitivity Headphone / Ultra Sensitivity Headphone             DAC section     DAC Dual-core DSD, DXD, PCM DAC by Burr Brown 2-DAC Chip; 4-Channel; 8-Signals, custom interleaving for maximum SNR   Bit-Perfect DSD processing, Bit-Perfect PCM processing         Clock Ultra low jitter GMT computer controlled Femto Clock RMS jitter 12kHz – 1MHz       Audio Formats DSD 512/256/128/64 24.6/22.6/12.4/11.2/6.2/5.6/3.1/2.8 All native decoding, no internal hardware conversion   DXD 2x/1x 768/705.6/384/352.8kHz All native decoding, no internal hardware conversion   PCM 768/705.6/384/352.8/192/176.4/96/88.2/ 48/44.1kHz All native decoding, no internal hardware conversion       Filters     - PCM Bit-Perfect Processing/Minimum Phase/Standard Digital filters selectable - DSD Extreme/Extended/Standard Range Analogue filters selectable - DXD Bit-Perfect Processing Fixed analogue filter             Specifications (DAC Section)     Dynamic Range (Line) >117db(A)   THD & N (0dBFS Line)   Output Voltage (Line) >2V   Output Impedance (Zout)   Jitter (correlated) Below AP2 test set limit               Headphone Power Output     HP Amp Output Power (max) Power (continuous.) - Turbo mode 10.0V/4,000 mW @ 16 Ohm >1560 mW @ 64 Ohm - Normal mode 5.5V/1,900 mW @ 16 Ohm >950 mW @ 32 Ohm - Eco mode 2.0V/500 mW @ 8 Ohm >250 mW @ 16 Ohm             Specifications (Headamp Section)     Dynamic Range (HP) >115dB(A) (Eco Mode, 2V Out)   THD &N (HP 500mW/16R)   Output Voltage (HP) >8V (Turbo Mode)   Output Impedance (Zout)   Maximum Output Power 4,000mW @ 16 Ohm Load when using sinewave testing the iDSD micro may engage protection circuits Continuous Output Power 1,000mW @ 64 Ohm Load  

Panasonic Lumix G VARIO 100 – 300mm F4.0-5.6 MEGA 0IS top in box! International bidders are welcome: English version of the announcement and German lower.. I note that the shipping costs are exactly what I pay, I do not take commission. Je vends mon zoom Panasonic 100 – 300mm micro 4/3 soit l’équivalent en full frame ou reflex 24x36 d’un 200 à 600 mm ! L’optique est en superbe état les photos en attestent. Il fonctionne parfaitement la bague de zoom est fluide; c’est la première version de cette optique qui a l’avantage d’être une version « Made in Japan ». Il est très bien stabilisé et ce stabilisateur est débrayable et se combine également à celui du boitier. Il est compatible avec les boitiers micro 4/3 Panasonic ou Olympus. Les lentilles sont indemnes de tout défaut car je l’ai toujours utilisé avec un filtre de protection (non vendu avec); il sera livré avec ses bouchons avant et arrière dans son emballage original et avec son parasoleil spécifique. Seul fait défaut la proche de protection que j’ai égarée mais qui de toute façon était trop souple et légère pour le protéger efficacement. Je l’ai peu utilisée et toujours avec soin. Expédition: Pour les frais de port sur une base Colissimo recommandé et assuré le prix sera de 12 € si je paye moins cher je rembourserais la différence par PayPal. Pour l’envoi pour l’international (monde entier), le prix sera de 20 € (Europe, inclus la Suisse) affinés selon sa destination au moment de la finalisation de la vente si je paye moins je rembourserai par PayPal la différence car je ne gagne pas d’argent sur les frais d’envoi. Me contacter avant d’enchérir si vous résidez en Grande Bretagne car les envois sont très compliqués depuis le Brexit et les frais de douane s’appliquent. Pour le reste du monde me contacter également car le port sera élevé. I am selling my Panasonic 100 – 300mm micro 4/3 zoom, the full frame or 24x36 reflex equivalent of a 200 to 600 mm! The optics are in superb condition, the photos attest to this. It works perfectly, the zoom ring is fluid; it is the first version of this optic which has the advantage of being a “Made in Japan” version. It is very well stabilized and this stabilizer is detachable and also combines with that of the case. It is compatible with Panasonic or Olympus micro 4/3 cameras. The lenses are free from any defects because I have always used them with a protective filter (not sold with); it will be delivered with its front and rear caps in its original packaging and with its specific lens hood. The only thing missing is the protective cover which I misplaced but which was anyway too flexible and light to protect it effectively. I used it little and always with care. Shipping: For shipping costs on a registered and insured Colissimo basis the price will be €12 if I pay less I will reimburse the difference by PayPal. For international shipping (worldwide), the price will be €20 (Europe, including Switzerland) refined according to its destination at the time of finalization of the sale if I pay less I will reimburse the difference by PayPal because I does not make money on shipping costs. Contact me before bidding if you live in Great Britain because shipping is very complicated since Brexit and customs fees apply. For the rest of the world also contact me because the shipping will be high. Ich verkaufe mein Panasonic 100 – 300 mm Micro 4/3 Zoom, das Vollformat oder 24x36 Reflex-Äquivalent eines 200 bis 600 mm! Die Optik ist in einem hervorragenden Zustand, die Fotos belegen dies. Es funktioniert einwandfrei, der Zoomring ist flüssig; Es ist die erste Version dieser Optik, die den Vorteil hat, eine „Made in Japan“-Version zu sein. Es ist sehr gut stabilisiert und dieser Stabilisator ist abnehmbar und lässt sich auch mit dem des Gehäuses kombinieren. Es ist kompatibel mit Panasonic- oder Olympus-Micro-4/3-Kameras. Die Objektive sind frei von Mängeln, da ich sie immer mit einem Schutzfilter (nicht im Lieferumfang enthalten) verwendet habe; Di En savoir plus Collaboration commerciale.

DAIWA CN-901 V SWR & Power Meter 140-525MHz 20W/200W. Daiwa CN-901V SWR Meter, 140-525MHz, 20/200W The CN-901 Series is a high quality instrument with unique features wich make tedious measurement of SWR and Power during antenna tests, matching and tuning of transmitters a very easy task. SWT and Power indicators are installed in one meter unit. One scale will indicate Forward Power, another scale Reflected Power and SWR is indicated at the crossing point of the 2 needles. This unique feature makes it possible to read Forward Power, Reflected Power and SWR all at the same time. Specifications: Frequency: 140 - 525 MHz Power Range: 20/200 W Input / Output Impedance: 50 ohms Input / Output Connectors: SO-239

SALE IS FOR ONE B01 PLATFORM, AND NOT THE FULL RACK SHOWN ABOVE Audiophile Base B01 Base Platform Review b'"'The Company’s name says it all really, and this is the base (sorry!) product along with various racks and the rather funkier StrataBase platform. From above, the charcoal silk finished surface doesn’t give much away, but the underneath of the Base 01 Platform incorporates some clever thinking. A pair of metal beams run from front to back and are linked to the main platform by compliant but absorptive coupling. In turn, the beams rest on four hard rubber feet. The combination of metal, soft coupling and MDF platform material makes for what is effectively constrained layer damping, with enough decoupling to prevent higher frequency vibrations from travelling up from feet to platform. The arrangement gives limited attenuation of very low frequencies, but good performance across mid-range and treble, and the MDF part is relatively non-resonant. This platform proved versatile in use, giving fine results with a range of equipment including both suspended and solid-chassis turntables. It was also very good with CD players, tightening up the sound and also adding bass extension. Amplifiers benefited less obviously, but a valve preamp certainly gained something in the clarity department and a solid-state power amp seemed more detailed in the lower octaves. High treble seemed largely unaltered in most cases, though the turntables gained some slight extra high frequency precision. Verdict A very practical support which adds very little height and looks good, and contributes usefully to the performance of a wide range of kit.b'"' RAPPEL BIENVEILLANT DES REGLES LEGALES CONCERNANT TRANSPORT ET LIVRAISON: Pour pouvoir engager la responsabilité du transporteur en cas exceptionnel de dégâts causés à une marchandise reçue, vous devez impérativement ouvrir les colis en présence du livreur, et formuler des réserves précises et explicites sur le bon de livraison. Porter la mention « sous réserve de déballage » sur le bon de livraison n’a aucune valeur juridique. Si le transporteur est toujours présumé responsable des dégâts causés à la marchandise (Code de commerce article L 133-1), encore faut-il le notifier par écrit lors de la réception, chez vous ou en bureau de poste. À défaut d’avoir ouvert les colis et noté précisément les dégâts, les marchandises seront réputées livrées en bon état. LA POSTE refuse toute réclamation de plus sans photos des dégâts et de l'emballage externe prises justement lors de la livraison. Deuxième étape: vous devez ensuite adresser au transporteur, dans un délai de trois jours, (Code de commerce article L 133-3). un courrier en recommandé avec accusé de réception, dans lequel vous rappellerez les dégâts causés aux marchandises et demanderez la réparation du préjudice. Je vous donnerai accès au document complété d'envoi LA POSTE avec toutes les informations nécessaires, évidemment. permet juste de laisser un numéro de tracking, pas suffisant. Toute enchère signifie que vous avez lu et compris ces termes légaux, qui l'emportent sur toute autre considération propre à ce site. Merci pour votre compréhension ! INTERNATIONAL BIDDERS, PLEASE NOTE: NO SALES TO: Russia, North Korea, Belarus, Syria, Eritrea, Algeria, Angola, Armenia, Bangladesh, Bolivia, Burundi, Central African Republic, China, Congo, Cuba, El Salvador, Equatorial Guinea, India, Iran, Iraq, Kazakhstan, Kyrgyzstan, Laos, Madagascar, Mali, Mongolia, Mozambique, Namibia, Nicaragua, Pakistan, Senegal, South Africa, South Sudan, Sri Lanka, Sudan, Tajikistan, Tanzania, Uganda, Vietnam, Zimbabwe, Azerbaijan, Burkina Faso, Cameroon, Ethiopia, Eswatini, Guinea, Guinea-Bissau, Morocco, Togo, Turkmenistan, Uzbekistan, Venezuela. No need to explain why... Anyone arguing with this rule will get no answer, and just earn a definite and immediate b En savoir plus

For sale a pair of used JVC FW-03 wood diaphragm earphones, with original box and accessories. In excellent condition and working perfectly. Earphones will be carefully packed and tracking number will be provided. Hi-Res Audio achieved with all-new 10mm wood dome driver unit Developed uniquely by JVC, the wooden dome technology has been refined even further by reducing the thickness down to 50µm.Paired with a light weight CCAW voicecoil and high power magnet assembly, the new wood dome driver is capable of reproducing more details and achieving Hi-Res Audio standards,   Carefully designed enclosure to suppress unwanted vibrations & resonance By using a different materials like wood, stainless steel, brass & aluminium, undesired vibrations are supressed to bring even more clarity and details to the music. Wide Variety of Eartip sizes to ensure perfect fit

ARU-02 wireless audio transmission completed with ARU-02 Transmitter and ARU-02 Receiver, adopts for UHF frequency and FM high fidelity coding technology. High quality signal is transmitted without compression or distortion, fully restore the really nice tone. Features: The transmitter with 6.35mm plug works well with most guitars and basses. Built-in 2 different channels option for you to use 2 system at one stage. Simple to use. The transmitter and the receiver are matched by code, power on and play. UHF frequency and FM high fidelity coding technology to perfectly transmit the signal and restore the really nice tone without any compression or distortion. Delay time within 5mS gives you wonderful music experience. With indicator for connecting, recharging and low power alarm. Comes with a USB cable and antenna. Specifications: ARU-02 Transmitter: Channel: 2 UHF Channels(A/B) Plug: 6.35mm Mono Plug Power: >10dBm Signal Noise Ratio: System Frequency Response: 40Hz~18KHz+-3dB Delay: Distortion: Max. Transmission Distortion: >20m(no obstacle) Power Supply: 3.7V/1000mAH Li-battery & 5V USB Cable Work Hour: 8 Hours(full recharged) Charging Time: Transmitter Size: 9 * 2.5 * 2cm / 3.6 * 1 * 0.8in Transmitter Weight: 47g / 1.7oz ARU-02 Receiver: Channel: 2 UHF Channels(A/B) Plug: 6.35mm Mono Plug Sensitivity: Signal Noise Ratio: Power Supply: 4 * AA Batteries(not included) or 5V USB Cable Audio Cable Length: 90cm Receiver Size: 13.5 * 9 * 3cm / 5.3 * 3.6 * 1.2in Receiver Weight: 129g / 4.6oz Package List: 1 * Transmitter 1 * Receiver 1 * USB Cable 1 * Antenna 1 * User's Manual Note: The amplifier and guitar showed in the picture are not included. Please pay attention that the transmitter plug can't be used for the audio interface which is on the top of guitar with concave design(showed in the picture). I2980

- - - Description:Promo Pro Lavalier Lapel Microphone for Wireless Microphones Sytem / Digital Recorder / Computer......Mono 3.5mm (1/8") External Screw Lock ConnectorA professional lavalier microphone with low profile and high performance for any wireless belt pack transmitter or digital recorder with Mono 1/8"(3.5mm) input or computer.Professional Lapel Lavalier condenser microphoneFor wireless mic system, computer, vocal, speech, dance and sport applications, for instrumental artists and solo entertainersCable's length: 1mFrequency response: 15 Hz to 16 kHzSPL: max. 132 dBSupply voltage: 1.5 to 10 VImpedance: 600 ΩSensitivity: -45 dBPlug: Mono 3.5 mm (1/8") External Screw Lock Connector (see photo)Included in the Package:> 1 x Micr... Crystalchrist Sale Pro Lavalier Lapel Microphone For Wireless Mic System Mono 3.5mm 1/8" Plug Description: Promo Pro Lavalier Lapel Microphone for Wireless Microphones Sytem / Digital Recorder / Computer...... Mono 3.5mm (1/8") External Screw Lock Connector A professional lavalier microphone with low profile and high performance for any wireless belt pack transmitter or digital recorder with Mono 1/8"(3.5mm) input or computer. Professional Lapel Lavalier condenser microphone For wireless mic system, computer, vocal, speech, dance and sport applications, for instrumental artists and solo entertainers Cable's length: 1m Frequency response: 15 Hz to 16 kHz SPL: max. 132 dB Supply voltage: 1.5 to 10 V Impedance: 600 Ω Sensitivity: -45 dB Plug: Mono 3.5 mm (1/8") External Screw Lock Connector (see photo) Included in the Package: > 1 x Microphone Item SpecificsBrand Unbranded/GenericCountry/Region of Manufacture ChinaMPN 19200088Type Condenser MicrophoneMicrophone Form Factor Lavalier/LapelConnectivity WirelessConnector(s) mono 3.5mm 1/8"UPC Does not apply Payment - We only accept payment by PayPal. - Payment MUST BE MADE within 5 business days after the end of the aution, Unpaid dispute will be filed to for the non payable bidders. Shipping - We are not responsible for undeliverable address. We reserve the right to charge the shipping fee again for returned items due to wrong address. - Item will be sent out by Air mail within 24-48 hours after clear payment (excluding weekend & holiday).  Arrival time (estimated): - United States: 8-15 working days  - Canada: 15-25 working days - Other countries: 25-35 working days - Shipping time is only estimated and not guaranteed. If not get item after 30 days, please contact us for solve. - We don't offer combine shipping. Returns - We can exchange the item within 30 days after you received it if it is defective. Returned item must have all original packaging and accessories with Approval Return Code. - Buyer are responsible for the returning shipping costs. We will be responsible for the postage of replacements. Refund will be made upon receipt of the returned item. - It may take up to 3 business days to process your return after we receive your product. - ALL ITEMS will be packed Without retail box.   - We strive to earn 100% perfect "Five-Star" scores from you. The star-scores are very important to us. If anything about your transaction did not meet your expectations, PLEASE LET US KNOW AND GIVE US THE OPPORTUNITY TO MAKE THINGS RIGHT before you leave feedback. Thanks for your Cooperation. Crystalchrist Store Cat.  Store Home  Car & Boat Accessories  ◈  LED Light & SMD Bulbs  ◈  Parts& Accessory  Home & Garden  ◈  Knobs  ◈  Rotary Tool  ◈  Health & Beauty  ◈  Craft & Accessory  ◈  Camera Accessory  ▷  Entertainment   ♢  Micphone Accessory   ♢  Guitar Accessory   ♢  Musical Instrumen

For sale Oppo HA-1 DAC & headphone amplifier. The amplifier has been very well taken care of (still has the original screen protection film) and is in very good condition (minor imperfection in the upper right corner next to potentiometer - hardly visible, check pics). Exquisite build and fantastic quality. Included:  - Oppo HA-1 DAC & headphone amplifier  - Remote control  - Power cord (EU)  - USB cable  - SPDIF coaxial cable The item will be carefully packed and sent via tracked and insured shipping. HIGH PERFORMANCE AUDIO - Discrete Class A Amplifier A Class A amplifier conducts signal over the entire range of the input signal cycle. The output transistors are biased to operate in their most linear range, and there is no crossover distortion caused by switching the signal between two push-pull devices. The HA-1's power amplification circuit for the headphones is Class A built with discrete transistors. The discrete design allows us to hand-pick and match the best parts to build the HA-1. - Toroidal Power Supply A toroidal power transformer offers superior power efficiency and much lower exterior magnetic fields over traditional laminated steel core transformers. The HA-1's toroidal linear power supply provides a very clean and robust power source to the audio components. - Fully Balanced Design The internal analog audio signal path of the HA-1 is fully balanced. For digital audio, the signal runs in balanced mode all the way from the DAC to the output jacks. Balanced analog input is kept intact, and single-ended input is converted to balanced at the input buffer. All single-ended outputs are derived from the balanced signal as well. The balanced design provides better common-mode noise rejection and improves signal quality. The balanced headphone output provides twice the voltage and four times the power of the single-ended output, enabling the HA-1 to drive the most power hungry headphones. It also provides better channel seperation by eliminating the common ground return path. - ESS Sabre32 Reference DAC The DAC is one of the most important components for digital audio playback. The SABRE32 Reference ES9018 from ESS Technology is the world’s best performing 32-bit audio DAC solution targeted for high-end consumer applications and professional studio equipment. With the ESS patented 32-bit Hyperstream™ DAC architecture and Time Domain Jitter Eliminator, the SABRE32 Reference DAC delivers an unprecedented DNR (Dynamic Range) of up to 135dB and THD+N (Total Harmonic Distortion plus Noise) of -120dB, the industry’s highest performance level that will satisfy even the most demanding audio enthusiast. To learn more about the technologies behind the exceptional performance of the SABRE DAC, please read the SABRE Technical White Paper. OPPO HA-1 4.3" information display - Clean Signal Path The HA-1 uses an analog potentiometer (the familar volume knob) to control the volume. By avoiding re-digitizing the audio signal for volume adjustment, the HA-1 provides a clean signal path for the audio. At the same time, the convenience of modern digital volume control is not lost - a remote-controlled motor turns the volume knob and a 10-bit analog-to-digital converter samples the signal to display a numeric dB level. - Made for iPod®, iPhone® and iPad® The HA-1 passes Apple's "MFi" certification and is compatibile with the latest iPod, iPhone and iPad to be used as the digital audio output accessory of these devices. By tapping directly into the digital audio signal of these devices and converting the audio to analog using the high performance SABRE32 Reference DAC, music from your favorite portable device will sound its best. - Wireless Audio via Bluetooth The HA-1 supports Bluetooth Advanced Audio Distribution Profile (A2DP) with both the standard and aptX® high quality codec. Simply pair your phone with the HA-1 and set music free

Rare paire Luxman C300 et M300:Amplificateur et préamplificateur (avec phono). État : "Occasion" En excellent état de fonctionnement, notez qu' il faudra remplacer une ampoule du voyant Led  "classe A". Voltage 220V. Les deux appareils sont visibles chez Jefferson Hifi à Pérouse où je les ai déposés. Livraison possible en France, en Europe,etc nous consulter pour les frais d'envoi internationaux. Le M300 a été produit en même temps que la série C300. Je crois qu’il n’en a été produit que 2000 dans le monde. C’est non seulement une paire de collection, mais le haut de gamme des luxman des années 1980. Ils sont les dernières combinaisons pré/ampli, à avoir été fabriquées sans implication de Alpine(qui a ensuite  modifié sérieusement la qualité Luxman  hélas.). ils ont été primés "produit de l'année" au début des années 80.  Le M300 se laisse utiliser soit en classe A, où il développe 2x42 w sous 8 ohms en classe A, ou alors 172w en classe AB sous 8 ohms. Comme toujours chez Luxman, on peut espérer une dizainede watts supplémentaires dans chaque modes, vu qu'ils utilisent unsystème de mesure très strict sur leurs fiches techniques. Il faut surtout savoir qu’il ne faut basculer de classe AB en classe A que à l’arrêt, en redémarrage à froid.  Voici  les caractéristiques techniques (https://audio-database.com/LUXMANALPINE-LUXMAN/amp/m-300-e.html) et https://audio-database.com/LUXMANALPINE-LUXMAN/amp/c-300-e.html 1)Préampli C300: Frequency response: 0.5Hz to 140kHz   Total harmonic distortion: 0.005% Input sensitivity: 0.09mV (MC), 2mV (MM), 140mV (line)      Signal to noise ratio: 80dB (MM), 100dB (line) Output: 140mV (line), 1V (Pre out), 20V (Pre out Max)  Dimensions: 478 x 163 x 384mm     Weight: 9kg 2)amplificateur M300 Form Duo beta plusX poweramplifier Succession effectiveoutput (20Hz - 20kHz, both channel simultaneous operation) Class-A: 40W+40W (8ohms) AB class: 270W+270W (4ohms) 170W+170W (8ohms) THD (8 ohms) 20Hz- 20kHz-3dB Class-A: 0.005% or less AB class: 0.005% or less Cross modulationdistortion (8 ohms) 60Hz: 7kHz=4:1, -3dB Class-A: 0.005% or less AB class: 0.005% or less Output bandwidth Class-A: 10Hz-100kH-3dB(0.015% of distortion) AB class: 10Hz - -100kHz three dB(0.04% of distortion) Frequency characteristic 10hz-100kHz-1dB (aClass-A and AB class) Input sensitivity Class-A: 0.45V ABclass: 1V Input impedance 50kohm (a Class-A and ABclass) SN ratio (IHF-Acorrection) Class-A: 115dB ABclass: 120dB Remains noise (IHF-Acorrection) 30 microvolts (a Class-Aand AB class) Dumping factor 120 (1kHz, 8 ohms, aClass-A, and AB class) Protection network DC drift detectionspeaker protection network Overcurrent detection amplifierprotection network Attachment Circuit operationswitchpoint (indicator) Peek indicator Inputattenuator Headset jack Speaker-off switchpoint(indicator) Line phase sensor Supply voltage AC100V, 50Hz/60Hz Power consumption (Electrical Appliance and Material Control Law) Class-A: 420W ABclass: 430W Dimensions Width 478x height 214xdepth of 484mm Weight 30kg Stereo power amplifier which adopted the Duo beta plusX circuitry. In order to control NFB of an amplifier circuitry appropriately, the Duo beta circuitry was developed and it is adopted as M-300. After this makes amplifier to the extent that it is used also from a nakedness property as it was, it adds proper-quantity NFB and DC servo as finish of a tone quality, and is suppressing the transitional distortion of a supression of play sound, TIM, etc. by superfluous NFB etc. Furthermore, in M-300, the thought of a suitable control is introduced also into a power circuit, and it is considered as the power-source Duo beta plusX. At plusX, the stability of a comfortable tone quality and an operation is reconciled because the bottom gives controlling force calmly on the assumption that a generous power-source part. M-300 can change and use a Class-A and AB class. The Class-A operation has a structure which amplifies a signal wave form as it is. Therefore, it becomes unrelated to switching distortion or crossover distortion, and does not have the cause that it is distorted in addition to an element's own linearity. In M-300, the Class-A operation excellent in adopting a Duo beta as LAPT which excelled [element] in the high region property, and an amplifier circuitry, and adopting plusX as a power circuit is realized. In AB class, Oide power which drives transitional distortion below into a limit of measurement in pursuit of a nakedness property also in an operation, and is not made in a Class-A operation on it is realized. At the time of a switching of a Class-A / AB class, in a performance, sound does not break off and a noise is not generated, either. Circuitry constituted all the amplification stages from a push-pull circuit from the input stage to the output stage, and the amplifier which was excellent in the nakedness property which will be the requisite for a Duo beta circuitry is realized. The pre-driver stage is making the input stage the transistor which was excellent in the high region property with the cascode interconnection with the stream composition of the cascode bootstrap and the differential push pull by complimentary FET of a Pch type and a Nch type. And the driver stage and the power stage are considered as the push pull stream composition by a three-step Darlington connection. A linearity makes an output element high speed power transistor linear arithmetic processor-T which was well excellent in the high region property with a triple push pull stream composition, and the electric current is sent. In this way, the static characteristics and the dynamic behavior improved. And proper-quantity NFB and DC servo are added. The power-source part had the twin monophonic stream composition of right-and-left full independence, and has acquired the merit of a linearity covering all the bands, and the outstanding crosstalk property. The power transformer is performing and using the coil mandatory adopted and put into practice among the object for Rch, and two Lch. First, the power stage and the drive stage were made into another coil, and also the primary side and secondary side has unified the orientation of a coil. This is because it is checking having influence on play sound with the potential (polarity) which a transformer begins to roll, rolls and the last each has between opposite groundings. Moreover, four right and left adopt the type only with a capacity of 12,000 micro F for an audio as a filter capacitor, and low-impedance-ization of the power-source part is attained to it. In order to cope with the rush current which becomes large as the capacity of a power-source part becomes large, the rushes current preventing circuitry is adopted. The speaker protection network and the amplifier protection network are carried. The internal organs of the speaker protection network which detects DC output in an output-terminal and separates an output are carried out. Furthermore, when the speaker code etc. short-circuits, even if there is a big input, an amplifier circuitry is protected or the electric-current preventing circuitry is carried. After the elements currently used examine, it is using it, carrying out a tone-quality mandatory strictly uniquely. The film capacitor generally called non-polar is also arranging a polarity etc., and the capacitor is carrying out the tone-quality mandatory strictly. Moreover, the precision succession good transformation Detent volume excellent in the tone quality and a feeling of an operation is adopted as input attenuator. Furthermore, in terminals, the small gilding pin jack of contact resistance was adopted as the input terminal, and the large-sized screw type is adopted as a speaker termination. The product line was packed into the shortest distance, and also it has chosen high materials of the tone-quality effect, such as a shielded cable of oxygen free high conductivity copper and 500 core. Moreover, in order to suppress an elevation of the source impedance of the pattern side of a substrate, the power bus by a copper plate was adopted and the performance of a power source is employed efficiently. The line phase sensor is carried, by the functionality which detects this polarity, the polarity of the equipment was unified and the tone quality is improved. The indicator turned on at the clipping point of an output is carried, and a peek can be supervised.

Car Kit Handsfree Wireless BT V3.0+EDR FM Transmitter MP3 Player USB LCD Digital Features: 100% Brand New and High Quality. Adjustable to any angles Full frequency FM transmitter Digital display Supports line audio input With power off switch(USB direct connect) Supports MP3/WMA/WAV format music Bluetooth answer, hang up, reject, redial calls and other functions Audio cable length: 30cm Bluetooth: Bluetooth version: V3.0+EDR Frequency: 20h - 20KHZ Sensitivity: -42db +/-3db 360 Voltage: 5V +/-0.5 Working current: 45mA(max) Standby current: 25mA(max) Effective distance: 5m RF output: 4dBm Frequency: FM Frequency: 87.5 - 108.0MHz Transmitted power: 87 dBuv/107dBuv Effective distance: 2m Package Includes: 1 x Car FM Transmitter 1 x Audio Cable 1 x User Manual