Motorola high power single

LNB SINGLE BLACK ULTRA INVERTO SINGLE BLACK ULTRA REF: IDLB-SINL40-ULTRA-OPP Série High Gain Low Noise 2 FICHES F OFFERT Tête LNB universelle Single série Black Ultra (High Gain Low Noise) gain élevé jusqu' à 72 dB et faible facteur de bruit 0,2 dB. Spécial réception difficile. Technical Specifications: Low Band Input Frequency Range   10.7~11.7 GHz Low Band Output Frequency Range   950~1950 MHz LO Frequency   9.75 GHz High Band Input Frequency Range   11.7~12.75 GHz High Band Output Frequency Range   1100~2150 MHz LO Frequency   10.6 GHz Noise Figure   0.2dB typ. (0.7dB max.) LO Initial Accuracy   +/- 1.0 MHz max. LO Temperature Drift   +/- 3.0 MHz max. LO Phase Noise @ 10K Hz   -90 dBc/Hz max. Conversion Gain   60 dB min. Gain Ripple   +/- 0.75 dB/27MHz Gain Variation   +/- 4 dB Image Rejection   40 dB min. 1 dB Compression Point (O/P)   0.0 dBm min. Cross talk   23dB min. Control Signals Ca [V]   11.0~14.0 V Control Signals Cb [H]   16.0~20.0 V Control Signals Cc [Band switching]   22KHz +/- 4KHz 0.4V – 0.8V pp Output VSWR   2.0: 1 Radiated Interference   -60 dBm max. DC Power   120mA max. @ 11 – 20V Working Temperature   -30~+60 °C Output Impedance (connect to STB)   75Ω Output connector   F-type (female) Weight   151 g Tel: 07.62.69.04.30 Mail:  abscs@msn.com POSEZ TOUTES VOS QUESTIONS AVANT D'ACHETER Merci

Consulter nos évaluations Ajouter cette boutique à mes favoris Tete LNB universelle Single 0.3 dB TSI 007 Single universal. Full KU-band coverage for both analogue and digital reception. Excellent noise figure and low phase noise. High gain and excellent cross-pole isolation. High output and low power consumption. Gain flatness. Supplied water stop. Single packed in gift box  

HD-LINE monoblock Single FULL HD 3D avec connecteur or LNB 0.1dB 6° astra19.2° Conversion Gain 60dB (max.) Gain Flatness ±0.75dB/26MHz Gain Variation 7dB/Full Band Current Consumption 160 mA (max.) Input Slection Tone Burst/DiSEqC 2.0 Output Connector 75 Ohm F-Type Female 1. Input Frequency High Band:11.70 ~ 12.75GHz Low Band: 10.70 ~ 11.70 GHz 2. Output Frequency High Band:1100 ~ 2150 MHz High Band:1100 ~ 2150 MHz 3. L.O. Frequency  High Band: 10.6 GHz Low Band: 9.75 GHz Excellent noise figure: 0,1 dB Low power consumption Integrated watter protection Input frequency: 10,7 - 12,75GHz Commutation: 13/18V and 0/22kHz Feed-Diameter: 40mm gain: 60db 5. Conversion Gain (Room Temp.) Gain Flatness Gain Variation · Garantie Fabricant: 1 an(s) "Length: 4.72 cm Height: 5.12 cm Width: 2.36 cm" L'expédition est GRATUITE à toutes les adresses en France Métropolitaine.(hors DOM-TOM) Nos stocks sont tous expédiés à partir de nos entrepôts français. Sauf indication contraire, toutes les commandes seront expédiées dans les 24 heures suivant la procédure de traitement. Consultez nos commentaires pour voir les excellents commentaires de livraison rapide que nous offrons.   PAYER SAFE: LE PAIEMENT DE PAYPAL EST ACCEPTÉ Nous offrons une politique de retour de 30 jours pour nos produits. Nous sommes derrière nos produits. Les articles peuvent être retournés pour l'échange ou le remboursement intégral dans les 30 jours suivant la date à laquelle vous recevez votre marchandise. Nous ne sommes pas responsables de tout achat après cette période de 30 jours. L'expédition de retour est sous la responsabilité de l'acheteur, sauf si le retour est le résultat de notre erreur. Nous vous rembourserons le remplacement de l'expédition si un échange est demandé.  Si vous avez des questions, contactez-nous sous le lien "Posez une question" Nous répondrons dans un délai de 1 jour ouvrable ou moins. Tous les retours doivent être effectués dans les 30 jours suivant la date d'achat. Veuillez noter que nous ne pouvons pas donner de remboursement après la fin de la limite de 30 jours. Lors de l'envoi d'un retour, notez qu'il peut prendre jusqu'à 7 jours ouvrables pour que le retour soit traité. Nous faisons de notre mieux pour traiter le plus rapidement possible.   DÉLAIS DE LIVRAISON Notre délai de livraison est de 2 à 3 jours,en général, et de 4 à 5 jours au plus tard. Les frais de livraison sont gratuits. Nous avons beaucoup d'emplacements d'expédition différents en fonction du produit que vous achetez et de l'emplacement d'expédition que vous choisissez. Nous essayons d'expédier la plupart des articles dans les 24 heures suivant le paiement de lundi à vendredi. La plupart des commandes sont en transit pendant deux jours, mais certaines peuvent prendre plus de temps. Si vous disposez d'un délai précis, veuillez nous contacter avant de procéder à l'achat.

NiNTAUS X10  DSD64 24Bit/192Khz Flac, MP3, AIF, Wav, APE, OGG,WMA HiFi Lossless Music Player Certifié HIGH RES Livré avec une housse, un casque de marque XIAOMI, un chargeur USB Externe Manuel en chinois en cours de traduction vers le francais Description Boitier en aluminium Ecran couleur 2.0inch TFT 300 * 240  Le NiNTAUS X10  supporte les formats  24 bit/192khz  Livré avec 1 carte de 16G Extensible à 128G expansion card 1 Sortie casque dual-channel output, X10 utilise des casques  avec un PO independent pour assurer un son de meilleure quallité Line-out and volume synchronization output, -6db and 0db optional User-friendly turntable design, the use of balance wheel control system and UI interface simultaneously display, can be quickly selected, whether it is manipulative or visual effects are brought about a different experience Support CUE format file, record track information, enjoy the shock single track effect after divide track, the general CUE format files need to combine the original track file to playback Treble transparent, recording track information, bass dive, sound field highly reduction, wide sound range. Native DSD, support DSD64 lossless format, the music signal direct audio decoding through the main control IC, remove the DOP process, greatly reducing the loss of sound quality, to achieve true native music playback. Lasting power life, X10 MPU energy-saving management, built-in 1500mAh lithium battery, continuous playback time of about 60 hours X10 can automatically synchronize the lyrics display is very convenient X10 supports full format lossless music playback, no longer convert format, X10 player built-in high-quality amps IC, HIFI circuit in a specially designation to give full play to the potential of audio decoding, Provides surging thrust, 16 ohm 300 ohm Specification Operating system: Window XP, VISTA, WINDOWS 8 Ecran: 2.0inch 320 * 240 Puissance de sortie casque:> = 80mw Control de volume  digital  Rapport signall bruit:> = 99db EQ: Rock, pop, soft, jazz, classical, electronic music,  Playback settings: normal, random, all, single loop playback mode Audio Rate: MP3: 16kbps-320kbps WMA: 16kbps-320kbps WAV: 24bit / 48khz 16kbps-1536kbps            APE / FLAC 24 bit / 192khz 512kbps-1536kbps Play time: about 60 hours (headset volume 30,play lossless music) Charging time: about 5 hours (using 5V / 1000 mA charger) Audio formats: MP3.WMA, WAV, APE, FLAC, ACC, OGG Menu Language: English, Russian Operating temperature: 0-45degree Transmission interface: micro 5pin, USB2.0 Expansion card: support 128GB Size:98*58*16mm Support formats： WMA: 96 KHz/24bit     FLAC: 192 kHz/24bit                                OGG: 48 kHz/16bit (wait for the upgarde) ACC: 48 KHz/16Bit                        APE: 192 kHz/24bit MP3: 24 KHz/16bit ALAC: 192 KHz/24bit WAV: 192 kHz/64bit AIFF: 48 kHz/16bit Package NiNTAUS X10 16GB Micro SD card USB cable Silicone case Casque XIAOMI

NiNTAUS X10 DAC Intégré 8965  24Bit/192Khz Ampli op TPA 6530 Flac, MP3, AIF, Wav, APE, OGG, WMA,  DSD64  HiFi Lossless Music Player Certifié HIGH RES Livré avec une housse, un casque supplémentaire  de marque XIAOMI, un chargeur  supplémentaire  USB Externe Manuel en chinois en cours de traduction vers le francais Description Boitier en aluminium Ecran couleur 2.0inch TFT 300 * 240  Le NiNTAUS X10  supporte les formats  24 bit/192khz  Livré avec 1 carte de 16G Extensible à 128G expansion card 1 Sortie casque dual-channel output, X10 utilise des casques  avec un PO independent pour assurer un son de meilleure quallité Line-out and volume synchronization output, -6db and 0db optional User-friendly turntable design, the use of balance wheel control system and UI interface simultaneously display, can be quickly selected, whether it is manipulative or visual effects are brought about a different experience Support CUE format file, record track information, enjoy the shock single track effect after divide track, the general CUE format files need to combine the original track file to playback Treble transparent, recording track information, bass dive, sound field highly reduction, wide sound range. Native DSD, support DSD64 lossless format, the music signal direct audio decoding through the main control IC, remove the DOP process, greatly reducing the loss of sound quality, to achieve true native music playback. Lasting power life, X10 MPU energy-saving management, built-in 1500mAh lithium battery, continuous playback time of about 60 hours X10 can automatically synchronize the lyrics display is very convenient X10 supports full format lossless music playback, no longer convert format, X10 player built-in high-quality amps IC, HIFI circuit in a specially designation to give full play to the potential of audio decoding, Provides surging thrust, 16 ohm 300 ohm Specification Operating system: Window XP, VISTA, WINDOWS 8 Ecran: 2.0inch 320 * 240 Puissance de sortie casque:> = 80mw Control de volume  digital  Rapport signall bruit:> = 99db EQ: Rock, pop, soft, jazz, classical, electronic music,  Playback settings: normal, random, all, single loop playback mode Audio Rate: MP3: 16kbps-320kbps WMA: 16kbps-320kbps WAV: 24bit / 48khz 16kbps-1536kbps            APE / FLAC 24 bit / 192khz 512kbps-1536kbps Play time: about 60 hours (headset volume 30,play lossless music) Charging time: about 5 hours (using 5V / 1000 mA charger) Audio formats: MP3.WMA, WAV, APE, FLAC, ACC, OGG Menu Language: English, Russian Operating temperature: 0-45degree Transmission interface: micro 5pin, USB2.0 Expansion card: support 128GB Size:98*58*16mm Support formats： WMA: 96 KHz/24bit     FLAC: 192 kHz/24bit                                OGG: 48 kHz/16bit (wait for the upgarde) ACC: 48 KHz/16Bit                        APE: 192 kHz/24bit MP3: 24 KHz/16bit ALAC: 192 KHz/24bit WAV: 192 kHz/64bit AIFF: 48 kHz/16bit Package NiNTAUS X10 16GB Micro SD card USB cable Silicone case Casque XIAOMI

Consulter nos évaluations Ajouter cette boutique à mes favoris LNB Single Inverto essential ULTRA HD pour Parabole satellite 1 sortie 19,90 € Disponibilité: en stock Démodulez le signal de votre parabole satellite sur 1 décodeur satellite.  Idéal pour les personnes seules ou si vous souhaitez démodulez le signal d'un autre satellite sur un seul téléviseur de votre domicile. Fixez convenablement votre  tête LNB  puis reliez la au décodeur de votre télévision. Une fois le signal bien reçu vous recevrez en haut définition chaînes TV et radios. Cette  tête LNB est universelle  est pourra s'accorder avec de nombreux satellites et décodeurs. Inverto IDLE-SINL46-ESSEN-OPP Low Band Input Frequency Range 10.7~11.7 GHz Low Band Output Frequency Range 950~1950 MHz LO Frequency 9.75 GHz High Band Input Frequency Range 11.7~12.75 GHz High Band Output Frequency Range  1100~2150 MHz LO Frequency 10.6 GHz Noise Figure 0.3dB typ. (0.7dB max.) LO Initial Accuracy +/- 1.0 MHz max. LO Temperature Drift +/- 3.0 MHz max. LO Phase Noise @ 10K Hz -80 dBc/Hz max. Conversion Gain 52dB ~ 62dB Gain Ripple +/- 0.75 dB/27MHz Gain Variation +/- 3  dB Image Rejection 40 dB min. 1 dB Compression Point (O/P) 0.0 dBm min. Cross talk 20dB min. Control Signals Ca [V] 11.0~14.0 V Control Signals Cb [H] 16.0~20.0 V Control Signals Cc [Band switching] 22KHz +/- 4KHz  0.4V – 0.8V pp Output VSWR 2.5: 1 Spurious level -60 dBm max. DC Power 90mA max. @ 11 – 20V Working Temperature -30~+60 °C Output Impedance (connect to STB) 75Ω Output connector F-type (female) Weight 80 g  

Valeur à neuf, 1600€ TTC, facture à l'appui Revente pour raison d'arrêt projet musical. Matériel bien entretenu et de bonne qualité. 50 Watts Class A/B Power 2x6L6, 5x12AX7 Bias Select Switch (6L6/EL34) 2 Channels, 5 Modes (Channel 1=Clean or Pushed, Channel 2=Raw, Vintage High Gain or Modern High Gain) Independent Gain, Bass, Mid, Treble, Presence and Master Controls per Channel Output Level Control (over all channels) Solo Level Control Parallel FX Loop w/Mix Control Slave Out 2 Button Footswitch (Channel & Solo) Slip Cover - 59

Change your language: Change your language: Change your language: Change your language: Change your language: Global-Audio-Store STUDIO - HOME STUDIO INSTRUMENT INFORMATIQUE MUSICALE LOGICIEL MAO ESPACE DJ ESPACE GUITARE ESPACE FLIGHT-CASE TRAITEMENT ACOUSTIQUE SONORISATION CÂBLES AUDIO ACCESSOIRES STUDIO - HOME STUDIO INSTRUMENT COMPUTER MUSIC SOFTWARE DJ SPACE GUITAR SPACE FLIGHT-CASE SPACE ACOUSTIC TREATMENT LIVE SOUND AUDIO CABLES ACCESSORIES STUDIO - HOME STUDIO INSTRUMENT COMPUTER MUSIC SOFTWARE DJ SPACE GUITAR SPACE FLIGHT-CASE SPACE ACOUSTIC TREATMENT LIVE SOUND AUDIO CABLES ACCESSORIES STUDIO - HOME STUDIO INSTRUMENT COMPUTER MUSIC SOFTWARE DJ SPACE GUITAR SPACE FLIGHT-CASE SPACE ACOUSTIC TREATMENT LIVE SOUND AUDIO CABLES ACCESSORIES STUDIO - HOME STUDIO INSTRUMENT COMPUTER MUSIC SOFTWARE DJ SPACE GUITAR SPACE FLIGHT-CASE SPACE ACOUSTIC TREATMENT LIVE SOUND AUDIO CABLES ACCESSORIES JBL - VRX 928LA Référence: VRX928LA 1 699,00 € Disponibilité:  Disponible en stock fournisseur Livraison:  Sous 2 jours ouvrés Garantie: 4 ans pièces & main-d'oeuvre En Savoir Plus JBL - VRX 928LA - Enceinte Micro Array 2 voies La VRX928LA est une enceinte ultra légère et compacte de type Line Array à courbure constante, 2 voies, équipée d’un 20 cm et de deux moteurs 1”. Jusqu’à 6 enceintes VRX928LA peuvent être assemblées par array. La VRX928LA est le choix idéal quand les performances d’un système Line Array sont exigées dans un espace de petite taille pour lequel les systèmes VRX932 ou Vertec seraient démesurés. Le guide d’onde “Constant Curvature” permet le couplage en arc des deux éléments hautes fréquences intégrés. Quand des éléments VRX928LA additionnels sont ajoutés à l’ensemble, la forme en arc se prolonge naturellement. L’effet obtenu permet de faire fonctionner les éléments comme un seul et même élément, contrôlés par un très long guide d’onde. Du fait de l’utilisation de 2 éléments dans la partie haute fréquence de chaque enceinte, la puissance combinée ainsi que l’énergie acoustique ainsi produite par le système, sont bien plus importantes que ce que pourrait fournir un seul élément. La VRX928LA utilise le procédé “amplitude shading” afin d’ajuster la pression acoustique de chacune des enceintes. L’enceinte supérieure ne sera pas atténuée pour diffuser dans le fond de salle, tandis que l’enceinte inférieure de l’array sera atténuée pour éviter l’excès de niveau sonore sur le devant de l’audience. Une ou deux enceintes VRX928LA peuvent être utilisées en satellite d’un subwoofer VRX915S. Caractéristiques techniques: * Type: 2 voies micro line array * Réponse en Fréquence: 87 Hz - 19 kHz, ±3 dB * Dispersion: 100° x 15° (H x V) * Sensibilité: * Passif: 90 dB, 1 W/1m * BF: 90 dB, 1 W/1m * HF: 108 dB, 1 W/1m * SPL Max: Passif: 122 dB * Impédance nominale: * Passif: 8 ohms * Bi-amp BF/HF: 8/16 ohms * Puissance d'amplification: * Passif: 400W / 800W / 1600W * MF: 400W / 800W / 1600W * HF: 30W / 60W / 120W * Puissance (AES/Programme/Crête) * Composants: * BF: 1 x 2268H (20cm) * HF: 2 x 2414H (1") * Finition: DuraFlex * Connecteurs: 2 x NL4 * Dimensions: 230 x 420 x 270 mm * Poids: 12,7 kg JBL - VRX 928LA Reference: VRX928LA 1 699,00 € Availability:  Available in supplier stock Processing time:  Under 2 working days Guaranty: 4 years by manufacturer More info JBL - VRX 928LA - Two-Way Line Array Loudspeaker System The VRX928LA is a lightweight (28 lb / 13 kg) compact 8" two-way linearray speaker system designed for use in arrays of up to six units. Features: * Constant Curvature Array - The waveguide mounts two compression drivers on a continuous arc enabling them to work together acoustically as if they were a single driver. * Amplitude Shading- Convenient series of switches on each enclosures that controls the output of each high frequency section in the array. * Suspension and Rigging. * Dual Angle Pole Socket - JBL's dual angle pole sockets allow great flexibility in aiming the enclosure (not on - WH version) * Differential Drive® Woofer. Specifications: * Power Rating: 400 W / 800 W / 1600W * Frequency Range: 70 Hz - 20 kHz (-10 dB) * Dimensions (H x W x D): 230 mm x 420 mm x 270 mm 9.0 in x 16.5 in x 10.5 in * Coverage Pattern: 100 x 15 nominal * Frequency Response: 85 Hz - 19 Hz (+/-3db) * Crossover Modes: Bi-amp / passive, * Crossover Frequency: 2.0 kHz * Weight: 12.7 kg (28 lb) JBL - VRX 928LA Referencia: VRX928LA 1 699,00 € Availability:  Available in supplier stock Processing time:  Under 2 working days Guaranty: 4 years by manufacturer Más JBL - VRX 928LA - Two-Way Line Array Loudspeaker System The VRX928LA is a lightweight (28 lb / 13 kg) compact 8" two-way linearray speaker system designed for use in arrays of up to six units. Features: * Constant Curvature Array - The waveguide mounts two compression drivers on a continuous arc enabling them to work together acoustically as if they were a single driver. * Amplitude Shading- Convenient series of switches on each enclosures that controls the output of each high frequency section in the array. * Suspension and Rigging. * Dual Angle Pole Socket - JBL's dual angle pole sockets allow great flexibility in aiming the enclosure (not on - WH version) * Differential Drive® Woofer. Specifications: * Power Rating: 400 W / 800 W / 1600W * Frequency Range: 70 Hz - 20 kHz (-10 dB) * Dimensions (H x W x D): 230 mm x 420 mm x 270 mm 9.0 in x 16.5 in x 10.5 in * Coverage Pattern: 100 x 15 nominal * Frequency Response: 85 Hz - 19 Hz (+/-3db) * Crossover Modes: Bi-amp / passive, * Crossover Frequency: 2.0 kHz * Weight: 12.7 kg (28 lb) JBL - VRX 928LA Artikel-Nr: VRX928LA 1 699,00 € Availability:  Available in supplier stock Processing time:  Under 2 working days Guaranty: 4 years by manufacturer Produktinfos JBL - VRX 928LA - Two-Way Line Array Loudspeaker System The VRX928LA is a lightweight (28 lb / 13 kg) compact 8" two-way linearray speaker system designed for use in arrays of up to six units. Features: * Constant Curvature Array - The waveguide mounts two compression drivers on a continuous arc enabling them to work together acoustically as if they were a single driver. * Amplitude Shading- Convenient series of switches on each enclosures that controls the output of each high frequency section in the array. * Suspension and Rigging. * Dual Angle Pole Socket - JBL's dual angle pole sockets allow great flexibility in aiming the enclosure (not on - WH version) * Differential Drive® Woofer. Specifications: * Power Rating: 400 W / 800 W / 1600W * Frequency Range: 70 Hz - 20 kHz (-10 dB) * Dimensions (H x W x D): 230 mm x 420 mm x 270 mm 9.0 in x 16.5 in x 10.5 in * Coverage Pattern: 100 x 15 nominal * Frequency Response: 85 Hz - 19 Hz (+/-3db) * Crossover Modes: Bi-amp / passive, * Crossover Frequency: 2.0 kHz * Weight: 12.7 kg (28 lb) JBL - VRX 928LA Riferimento: VRX928LA 1 699,00 € Availability:  Available in supplier stock Processing time:  Under 2 working days Guaranty: 4 years by manufacturer Dettagli JBL - VRX 928LA - Two-Way Line Array Loudspeaker System The VRX928LA is a lightweight (28 lb / 13 kg) compact 8" two-way linearray speaker system designed for use in arrays of up to six units. Features: * Constant Curvature Array - The waveguide mounts two compression drivers on a continuous arc enabling them to work together acoustically as if they were a single driver. * Amplitude Shading- Convenient series of switches on each enclosures that controls the output of each high frequency section in the array. * Suspension and Rigging. * Dual Angle Pole Socket - JBL's dual angle pole sockets allow great flexibility in aiming the enclosure (not on - WH version) * Differential Drive® Woofer. Specifications: * Power Rating: 400 W / 800 W / 1600W * Frequency Range: 70 Hz - 20 kHz (-10 dB) * Dimensions (H x W x D): 230 mm x 420 mm x 270 mm 9.0 in x 16.5 in x 10.5 in * Coverage Pattern: 100 x 15 nominal * Frequency Response: 85 Hz - 19 Hz (+/-3db) * Crossover Modes: Bi-amp / passive, * Crossover Frequency: 2.0 kHz * Weight: 12.7 kg (28 lb) Global Audio Store, Revendeur JBL agréé Global Audio Store, Authorized JBL Dealer Global Audio Store, Authorized JBL Dealer Global Audio Store, Authorized JBL Dealer Global Audio Store, Authorized JBL Dealer

Change your language: Change your language: Change your language: Change your language: Change your language: Global-Audio-Store STUDIO - HOME STUDIO INSTRUMENT INFORMATIQUE MUSICALE LOGICIEL MAO ESPACE DJ ESPACE GUITARE ESPACE FLIGHT-CASE TRAITEMENT ACOUSTIQUE SONORISATION CÂBLES AUDIO ACCESSOIRES STUDIO - HOME STUDIO INSTRUMENT COMPUTER MUSIC SOFTWARE DJ SPACE GUITAR SPACE FLIGHT-CASE SPACE ACOUSTIC TREATMENT LIVE SOUND AUDIO CABLES ACCESSORIES STUDIO - HOME STUDIO INSTRUMENT COMPUTER MUSIC SOFTWARE DJ SPACE GUITAR SPACE FLIGHT-CASE SPACE ACOUSTIC TREATMENT LIVE SOUND AUDIO CABLES ACCESSORIES STUDIO - HOME STUDIO INSTRUMENT COMPUTER MUSIC SOFTWARE DJ SPACE GUITAR SPACE FLIGHT-CASE SPACE ACOUSTIC TREATMENT LIVE SOUND AUDIO CABLES ACCESSORIES STUDIO - HOME STUDIO INSTRUMENT COMPUTER MUSIC SOFTWARE DJ SPACE GUITAR SPACE FLIGHT-CASE SPACE ACOUSTIC TREATMENT LIVE SOUND AUDIO CABLES ACCESSORIES GENELEC - 8330 APM Référence: 8330APM 749,00 € Disponibilité:  Disponible en stock fournisseur Livraison:  Sous 2 jours ouvrés Garantie: 5 ans pièces & main-d'oeuvre En Savoir Plus GENELEC - 8330 APM - LA PIECE Genelec s'adapte au marché grandissant de la production média, en proposant une nouvelle série d'enceintes 2 voies, compactes et puissantes; équipées de la technologie SAM (Smart Active Monitor). Cette enceinte 8330 APM a été conçue pour les ingénieurs du son évoluant en home-studio, et s'avère idéale pour une utilisation en espace confiné. Les productions se font aujourd'hui dans des espaces réduits, pas forcément traités acoustiquement, et il est devenu difficile pour les ingénieurs du son de trouver des enceintes de premier choix offrant un rendement optimum dans des espaces inadaptés. Genelec propose avec ces enceintes un nouveau système de référence, dans lequel les ingénieurs du son, quels que soit leur niveau, pourront avoir une totale confiance. Brevetée avec les systèmes MDE (Minimum Diffraction Enclosure) et DCW (Directivity Control Waveguide), elle vous garantit une image fidèle, avec un minimum de dispersion. Equipée d'amplis Classe D, et de filtres DSP, elle vous offrira un son énorme, malgré sa petite taille. Caractéristiques: * SPL Max: 104 dB * Réponse en fréquence: 45 Hz – 23 kHz (-6 dB) * Fréquence de coupure: ± 1.5 dB (66 Hz - 20kHz) * Dimensions des conducteurs: Woofer 12.7 cm + Tweeter 2 cm * metal dome + DCW™ * Puissance: Woofer 50 W + Tweeter 50 W * Dimensions: H 299 x W 189 x D 178 mm * Poids: 5.5 kg * Connexions: 1 x XLR entrée analogique * 2 XLR AES/EBU e/s * 2 contrôles ethernet RJ45 GENELEC - 8330 APM Reference: 8330APM 749,00 € Availability:  Available in supplier stock Processing time:  Under 2 working days Guaranty: 5 years by manufacturer More info GENELEC - 8330 APM - Single The powerful 8330A Smart Active Monitor (SAM™) is today's most advanced and flexible monitoring solution. The 8330A features Genelec MDE™ and DCW™ technologies, a flow optimized reflex port, high SPL and wide uncoloured response in a very compact enclosure. A new and highly intuitive Genelec Loudspeaker Manager (GLM™ 2.0) control network and software allows adjustments of all aspects of monitor settings and full system control. Genelec AutoCal™ allows to automatically align every monitor on the network for level, timing, and equalisation of room response anomalies. An indispensable tool in challenging room acoustic, the 8330A is the monitoring solution for music studios, post-production houses, digital edit suites, radio, TV and outside broadcasting. Secifications: * maximum sound pressure level 104 dB * frequency response 45 Hz – 23 kHz (-6 dB) * crossover frequency ± 1.5 dB (58 Hz - 20kHz) * driver dimension Woofer 5 in + Tweeter 3/4 in * metal dome + DCW™ * amplifier power Woofer 50 W + Tweeter 50 W * dimensions H 299 x W 189 x D 178 mm * 11 7/8 x 7 1/2 x 7 1/16 in, * with Iso-Pod™ * weight 5.5 kg / 12.1 lb * connectors * 1 x XLR analogue input * 2 x XLR AES/EBU input / output * 2 x RJ45 control network GENELEC - 8330 APM Referencia: 8330APM 749,00 € Availability:  Available in supplier stock Processing time:  Under 2 working days Guaranty: 5 years by manufacturer Más GENELEC - 8330 APM - Single The powerful 8330A Smart Active Monitor (SAM™) is today's most advanced and flexible monitoring solution. The 8330A features Genelec MDE™ and DCW™ technologies, a flow optimized reflex port, high SPL and wide uncoloured response in a very compact enclosure. A new and highly intuitive Genelec Loudspeaker Manager (GLM™ 2.0) control network and software allows adjustments of all aspects of monitor settings and full system control. Genelec AutoCal™ allows to automatically align every monitor on the network for level, timing, and equalisation of room response anomalies. An indispensable tool in challenging room acoustic, the 8330A is the monitoring solution for music studios, post-production houses, digital edit suites, radio, TV and outside broadcasting. Caractéristiques: * maximum sound pressure level 104 dB * frequency response 45 Hz – 23 kHz (-6 dB) * crossover frequency ± 1.5 dB (58 Hz - 20kHz) * driver dimension Woofer 5 in + Tweeter 3/4 in * metal dome + DCW™ * amplifier power Woofer 50 W + Tweeter 50 W * dimensions H 299 x W 189 x D 178 mm * 11 7/8 x 7 1/2 x 7 1/16 in, * with Iso-Pod™ * weight 5.5 kg / 12.1 lb * connectors * 1 x XLR analogue input * 2 x XLR AES/EBU input / output * 2 x RJ45 control network GENELEC - 8330 APM Artikel-Nr: 8330APM 749,00 € Availability:  Available in supplier stock Processing time:  Under 2 working days Guaranty: 5 years by manufacturer Produktinfos GENELEC - 8330 APM - Single The powerful 8330A Smart Active Monitor (SAM™) is today's most advanced and flexible monitoring solution. The 8330A features Genelec MDE™ and DCW™ technologies, a flow optimized reflex port, high SPL and wide uncoloured response in a very compact enclosure. A new and highly intuitive Genelec Loudspeaker Manager (GLM™ 2.0) control network and software allows adjustments of all aspects of monitor settings and full system control. Genelec AutoCal™ allows to automatically align every monitor on the network for level, timing, and equalisation of room response anomalies. An indispensable tool in challenging room acoustic, the 8330A is the monitoring solution for music studios, post-production houses, digital edit suites, radio, TV and outside broadcasting. Caractéristiques: * maximum sound pressure level 104 dB * frequency response 45 Hz – 23 kHz (-6 dB) * crossover frequency ± 1.5 dB (58 Hz - 20kHz) * driver dimension Woofer 5 in + Tweeter 3/4 in * metal dome + DCW™ * amplifier power Woofer 50 W + Tweeter 50 W * dimensions H 299 x W 189 x D 178 mm * 11 7/8 x 7 1/2 x 7 1/16 in, * with Iso-Pod™ * weight 5.5 kg / 12.1 lb * connectors * 1 x XLR analogue input * 2 x XLR AES/EBU input / output * 2 x RJ45 control network GENELEC - 8330 APM Riferimento: 8330APM 749,00 € Availability:  Available in supplier stock Processing time:  Under 2 working days Guaranty: 5 years by manufacturer Dettagli GENELEC - 8330 APM - Single The powerful 8330A Smart Active Monitor (SAM™) is today's most advanced and flexible monitoring solution. The 8330A features Genelec MDE™ and DCW™ technologies, a flow optimized reflex port, high SPL and wide uncoloured response in a very compact enclosure. A new and highly intuitive Genelec Loudspeaker Manager (GLM™ 2.0) control network and software allows adjustments of all aspects of monitor settings and full system control. Genelec AutoCal™ allows to automatically align every monitor on the network for level, timing, and equalisation of room response anomalies. An indispensable tool in challenging room acoustic, the 8330A is the monitoring solution for music studios, post-production houses, digital edit suites, radio, TV and outside broadcasting. Caractéristiques: * maximum sound pressure level 104 dB * frequency response 45 Hz – 23 kHz (-6 dB) * crossover frequency ± 1.5 dB (58 Hz - 20kHz) * driver dimension Woofer 5 in + Tweeter 3/4 in * metal dome + DCW™ * amplifier power Woofer 50 W + Tweeter 50 W * dimensions H 299 x W 189 x D 178 mm * 11 7/8 x 7 1/2 x 7 1/16 in, * with Iso-Pod™ * weight 5.5 kg / 12.1 lb * connectors * 1 x XLR analogue input * 2 x XLR AES/EBU input / output * 2 x RJ45 control network Global Audio Store, Revendeur Genelec agréé Global Audio Store, Authorized Genelec Dealer Global Audio Store, Authorized Genelec Dealer Global Audio Store, Authorized Genelec Dealer Global Audio Store, Authorized Genelec Dealer

12V Bluetooth 4.2 voiture lecteur MP3 WMA / WAV décodeur module audio USB SD FM Specification Installation pitch: 92 mm wide Installation hole: 83 x 20 x 38 mm Overall dimensions: 107*25*38mm/ 4.21*0.98*1.5 "  Input voltage：7-12V Descriptions 100% Brand New and high quality support bluetooth (Bluetooth3.0 EDR) (after been paired with mobile phones can realize wireless music play) support USB/TF/Bluetooth/FM/LINE switch.MP3/WMA,WAV lossless music decoding chip. support USB/TF card switch,PREV,NEXT,fast forward,fast rewind, volume,EQ,play/pause,stop,single repeat,mute, shutdown and direct election. support Bluetoot PREV,NEXT,volume,EQ,play/pause,mute,turn it off. support FAT16,FAT32 file system.Support for MP1 Layer3,MP2 Layer3,MP3 Layer3 version of the song. Support 32-320 KBPS MP3 songs. support power off memory function: memory play songs and volume before power off. Note: Non-smart phones (android) have to enter the password - 0000 Decoding board play mode instruction Decoding board in the absence of memory card or U disk,boot default to "audio input" mode,the screen display LINE Press "MODE" key on the panel or the remote control switch to bluetooth MODE,the screen shows "BLUE",can open bluetooth search connection at this time Press "MODE" key on the panel or the remote control switch to radio MODE,the screen display FM radio frequency,long press "PLAY" button automatic searching channel Press "MODE" key on the panel or the remote control switch to the U disk or memory card "play MODE",the screen displays the time schedule of the song The remote control instruction: POWER: STANDBY button cannot switch. MODE: TF card and U disk: switching sequence for USB→TF→Bluetooth→FM→AUX;Only U disk: switching sequence for USB→Bluetooth→FM→AUX;Only the TF card: switching sequence for TF→Bluetooth→FM→AUX;There is no USB and TF card: switching sequence for FM→AUX→Bluetooth. PREV: In USB/TF/Bluetooth MODE,short press for PREV;In the USB/SD MODE,long press for fast rewind;In FM MODE, short press for last channel,long press for scan search last channel. NEXT: In USB/TF/Bluetooth MODE,short press for NEXT;In USB/TF MODE,long press for fast forward;In FM MODE,short press for next channel,long press for scan search the next channel. VOL +: short/long press for music. VOL -: short/long press for music. REP:In USB/TF MODE,is the switch key between single repeat and whole cycle when play music,boot for all cycle. STOP: In the USB/TF MODE,short press to STOP the music play. MUTE: MUTE,press for MUTE,press again for relieve(also can relieve by VOL- /VOL+). EQ: Acoustic field MODE.The NORMAL→BAS→POP→ROC→JAZZ→CLA→CUT→NORMAL PLAY/PAUSE: In USB/SD/Bluetooth MODE for PLAY/PAUSE;In the FM MODE,long press for searching all channels and save. Package Include 1 x Decoding board 1 x The remote control (no battery included) 1 x 2P plug wire with power supply reverse connection protection 1 x 3P audio plug thread Moyen de Paiment Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. Livraison Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Conditions de vente Sur Nous Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Specification Installation pitch: 92 mm wide Installation hole: 83 x 20 x 38 mm Overall dimensions: 107*25*38mm/ 4.21*0.98*1.5 "  Input voltage：7-12V Descriptions 100% Brand New and high quality support bluetooth (Bluetooth3.0 EDR) (after been paired with mobile phones can realize wireless music play) support USB/TF/Bluetooth/FM/LINE switch.MP3/WMA,WAV lossless music decoding chip. support USB/TF card switch,PREV,NEXT,fast forward,fast rewind, volume,EQ,play/pause,stop,single repeat,mute, shutdown and direct election. support Bluetoot PREV,NEXT,volume,EQ,play/pause,mute,turn it off. support FAT16,FAT32 file system.Support for MP1 Layer3,MP2 Layer3,MP3 Layer3 version of the song. Support 32-320 KBPS MP3 songs. support power off memory function: memory play songs and volume before power off. Note: Non-smart phones (android) have to enter the password - 0000 Decoding board play mode instruction Decoding board in the absence of memory card or U disk,boot default to "audio input" mode,the screen display LINE Press "MODE" key on the panel or the remote control switch to bluetooth MODE,the screen shows "BLUE",can open bluetooth search connection at this time Press "MODE" key on the panel or the remote control switch to radio MODE,the screen display FM radio frequency,long press "PLAY" button automatic searching channel Press "MODE" key on the panel or the remote control switch to the U disk or memory card "play MODE",the screen displays the time schedule of the song The remote control instruction: POWER: STANDBY button cannot switch. MODE: TF card and U disk: switching sequence for USB→TF→Bluetooth→FM→AUX;Only U disk: switching sequence for USB→Bluetooth→FM→AUX;Only the TF card: switching sequence for TF→Bluetooth→FM→AUX;There is no USB and TF card: switching sequence for FM→AUX→Bluetooth. PREV: In USB/TF/Bluetooth MODE,short press for PREV;In the USB/SD MODE,long press for fast rewind;In FM MODE, short press for last channel,long press for scan search last channel. NEXT: In USB/TF/Bluetooth MODE,short press for NEXT;In USB/TF MODE,long press for fast forward;In FM MODE,short press for next channel,long press for scan search the next channel. VOL +: short/long press for music. VOL -: short/long press for music. REP:In USB/TF MODE,is the switch key between single repeat and whole cycle when play music,boot for all cycle. STOP: In the USB/TF MODE,short press to STOP the music play. MUTE: MUTE,press for MUTE,press again for relieve(also can relieve by VOL- /VOL+). EQ: Acoustic field MODE.The NORMAL→BAS→POP→ROC→JAZZ→CLA→CUT→NORMAL PLAY/PAUSE: In USB/SD/Bluetooth MODE for PLAY/PAUSE;In the FM MODE,long press for searching all channels and save. Package Include 1 x Decoding board 1 x The remote control (no battery included) 1 x 2P plug wire with power supply reverse connection protection 1 x 3P audio plug thread PAYMENT Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. SHIPPING Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. ABOUT US Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Le 02-juil.-19 à 10:04:31 Paris, le vendeur a ajouté les informations suivantes:

12V Bluetooth 4.2 voiture lecteur MP3 WMA/WAV décodeur module audio USB SD FM PS Specification Installation pitch: 92 mm wide Installation hole: 83 x 20 x 38 mm Overall dimensions: 107*25*38mm/ 4.21*0.98*1.5 "  Input voltage：7-12V Descriptions 100% Brand New and high quality support bluetooth (Bluetooth3.0 EDR) (after been paired with mobile phones can realize wireless music play) support USB/TF/Bluetooth/FM/LINE switch.MP3/WMA,WAV lossless music decoding chip. support USB/TF card switch,PREV,NEXT,fast forward,fast rewind, volume,EQ,play/pause,stop,single repeat,mute, shutdown and direct election. support Bluetoot PREV,NEXT,volume,EQ,play/pause,mute,turn it off. support FAT16,FAT32 file system.Support for MP1 Layer3,MP2 Layer3,MP3 Layer3 version of the song. Support 32-320 KBPS MP3 songs. support power off memory function: memory play songs and volume before power off. Note: Non-smart phones (android) have to enter the password - 0000 Decoding board play mode instruction Decoding board in the absence of memory card or U disk,boot default to "audio input" mode,the screen display LINE Press "MODE" key on the panel or the remote control switch to bluetooth MODE,the screen shows "BLUE",can open bluetooth search connection at this time Press "MODE" key on the panel or the remote control switch to radio MODE,the screen display FM radio frequency,long press "PLAY" button automatic searching channel Press "MODE" key on the panel or the remote control switch to the U disk or memory card "play MODE",the screen displays the time schedule of the song The remote control instruction: POWER: STANDBY button cannot switch. MODE: TF card and U disk: switching sequence for USB→TF→Bluetooth→FM→AUX;Only U disk: switching sequence for USB→Bluetooth→FM→AUX;Only the TF card: switching sequence for TF→Bluetooth→FM→AUX;There is no USB and TF card: switching sequence for FM→AUX→Bluetooth. PREV: In USB/TF/Bluetooth MODE,short press for PREV;In the USB/SD MODE,long press for fast rewind;In FM MODE, short press for last channel,long press for scan search last channel. NEXT: In USB/TF/Bluetooth MODE,short press for NEXT;In USB/TF MODE,long press for fast forward;In FM MODE,short press for next channel,long press for scan search the next channel. VOL +: short/long press for music. VOL -: short/long press for music. REP:In USB/TF MODE,is the switch key between single repeat and whole cycle when play music,boot for all cycle. STOP: In the USB/TF MODE,short press to STOP the music play. MUTE: MUTE,press for MUTE,press again for relieve(also can relieve by VOL- /VOL+). EQ: Acoustic field MODE.The NORMAL→BAS→POP→ROC→JAZZ→CLA→CUT→NORMAL PLAY/PAUSE: In USB/SD/Bluetooth MODE for PLAY/PAUSE;In the FM MODE,long press for searching all channels and save. Package Include 1 x Decoding board 1 x The remote control (no battery included) 1 x 2P plug wire with power supply reverse connection protection 1 x 3P audio plug thread Moyen de paiement Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. Livraison Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Conditions de vente Si vous n'êtes pas satisfait de votre achat, contactez-nous sans hésiter. Les articles peuvent être retournés dans 30 jours en état inutilisé, nous effectuerons un échange et un remboursement une fois que nous aurons reçu l'objet. Gardez les étiquettes entières et les éléments propres sans saveur, si non nous n'accepterons pas le retour. Sur nous Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Specification Installation pitch: 92 mm wide Installation hole: 83 x 20 x 38 mm Overall dimensions: 107*25*38mm/ 4.21*0.98*1.5 "  Input voltage：7-12V Descriptions 100% Brand New and high quality support bluetooth (Bluetooth3.0 EDR) (after been paired with mobile phones can realize wireless music play) support USB/TF/Bluetooth/FM/LINE switch.MP3/WMA,WAV lossless music decoding chip. support USB/TF card switch,PREV,NEXT,fast forward,fast rewind, volume,EQ,play/pause,stop,single repeat,mute, shutdown and direct election. support Bluetoot PREV,NEXT,volume,EQ,play/pause,mute,turn it off. support FAT16,FAT32 file system.Support for MP1 Layer3,MP2 Layer3,MP3 Layer3 version of the song. Support 32-320 KBPS MP3 songs. support power off memory function: memory play songs and volume before power off. Note: Non-smart phones (android) have to enter the password - 0000 Decoding board play mode instruction Decoding board in the absence of memory card or U disk,boot default to "audio input" mode,the screen display LINE Press "MODE" key on the panel or the remote control switch to bluetooth MODE,the screen shows "BLUE",can open bluetooth search connection at this time Press "MODE" key on the panel or the remote control switch to radio MODE,the screen display FM radio frequency,long press "PLAY" button automatic searching channel Press "MODE" key on the panel or the remote control switch to the U disk or memory card "play MODE",the screen displays the time schedule of the song The remote control instruction: POWER: STANDBY button cannot switch. MODE: TF card and U disk: switching sequence for USB→TF→Bluetooth→FM→AUX;Only U disk: switching sequence for USB→Bluetooth→FM→AUX;Only the TF card: switching sequence for TF→Bluetooth→FM→AUX;There is no USB and TF card: switching sequence for FM→AUX→Bluetooth. PREV: In USB/TF/Bluetooth MODE,short press for PREV;In the USB/SD MODE,long press for fast rewind;In FM MODE, short press for last channel,long press for scan search last channel. NEXT: In USB/TF/Bluetooth MODE,short press for NEXT;In USB/TF MODE,long press for fast forward;In FM MODE,short press for next channel,long press for scan search the next channel. VOL +: short/long press for music. VOL -: short/long press for music. REP:In USB/TF MODE,is the switch key between single repeat and whole cycle when play music,boot for all cycle. STOP: In the USB/TF MODE,short press to STOP the music play. MUTE: MUTE,press for MUTE,press again for relieve(also can relieve by VOL- /VOL+). EQ: Acoustic field MODE.The NORMAL→BAS→POP→ROC→JAZZ→CLA→CUT→NORMAL PLAY/PAUSE: In USB/SD/Bluetooth MODE for PLAY/PAUSE;In the FM MODE,long press for searching all channels and save. Package Include 1 x Decoding board 1 x The remote control (no battery included) 1 x 2P plug wire with power supply reverse connection protection 1 x 3P audio plug thread PAYMENT Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. SHIPPING Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Terms of Sale Si vous n'êtes pas satisfait de votre achat, contactez-nous sans hésiter. Les articles peuvent être retournés dans 30 jours en état inutilisé, nous effectuerons un échange et un remboursement une fois que nous aurons reçu l'objet. Gardez les étiquettes entières et les éléments propres sans saveur, si non nous n'accepterons pas le retour. ABOUT US Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Le 28-juin-19 à 19:09:25 Paris, le vendeur a ajouté les informations suivantes:

12 V voiture MP3 Bluetooth WMA / WAV carte décodeur Module Audio USB SD FM TF LB Specification Installation pitch: 92 mm wide Installation hole: 83 x 20 x 38 mm Overall dimensions: 107*25*38mm/ 4.21*0.98*1.5 "  Input voltage：7-12V Descriptions 100% Brand New and high quality support bluetooth (Bluetooth3.0 EDR) (after been paired with mobile phones can realize wireless music play) support USB/TF/Bluetooth/FM/LINE switch.MP3/WMA,WAV lossless music decoding chip. support USB/TF card switch,PREV,NEXT,fast forward,fast rewind, volume,EQ,play/pause,stop,single repeat,mute, shutdown and direct election. support Bluetoot PREV,NEXT,volume,EQ,play/pause,mute,turn it off. support FAT16,FAT32 file system.Support for MP1 Layer3,MP2 Layer3,MP3 Layer3 version of the song. Support 32-320 KBPS MP3 songs. support power off memory function: memory play songs and volume before power off. Note: Non-smart phones (android) have to enter the password - 0000 Decoding board play mode instruction Decoding board in the absence of memory card or U disk,boot default to "audio input" mode,the screen display LINE Press "MODE" key on the panel or the remote control switch to bluetooth MODE,the screen shows "BLUE",can open bluetooth search connection at this time Press "MODE" key on the panel or the remote control switch to radio MODE,the screen display FM radio frequency,long press "PLAY" button automatic searching channel Press "MODE" key on the panel or the remote control switch to the U disk or memory card "play MODE",the screen displays the time schedule of the song The remote control instruction: POWER: STANDBY button cannot switch. MODE: TF card and U disk: switching sequence for USB→TF→Bluetooth→FM→AUX;Only U disk: switching sequence for USB→Bluetooth→FM→AUX;Only the TF card: switching sequence for TF→Bluetooth→FM→AUX;There is no USB and TF card: switching sequence for FM→AUX→Bluetooth. PREV: In USB/TF/Bluetooth MODE,short press for PREV;In the USB/SD MODE,long press for fast rewind;In FM MODE, short press for last channel,long press for scan search last channel. NEXT: In USB/TF/Bluetooth MODE,short press for NEXT;In USB/TF MODE,long press for fast forward;In FM MODE,short press for next channel,long press for scan search the next channel. VOL +: short/long press for music. VOL -: short/long press for music. REP:In USB/TF MODE,is the switch key between single repeat and whole cycle when play music,boot for all cycle. STOP: In the USB/TF MODE,short press to STOP the music play. MUTE: MUTE,press for MUTE,press again for relieve(also can relieve by VOL- /VOL+). EQ: Acoustic field MODE.The NORMAL→BAS→POP→ROC→JAZZ→CLA→CUT→NORMAL PLAY/PAUSE: In USB/SD/Bluetooth MODE for PLAY/PAUSE;In the FM MODE,long press for searching all channels and save. Package Include 1 x Decoding board 1 x The remote control (no battery included) 1 x 2P plug wire with power supply reverse connection protection 1 x 3P audio plug thread Moyen de Paiement Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. Livraison Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Politique de Retour Sur nous Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Specification Installation pitch: 92 mm wide Installation hole: 83 x 20 x 38 mm Overall dimensions: 107*25*38mm/ 4.21*0.98*1.5 "  Input voltage：7-12V Descriptions 100% Brand New and high quality support bluetooth (Bluetooth3.0 EDR) (after been paired with mobile phones can realize wireless music play) support USB/TF/Bluetooth/FM/LINE switch.MP3/WMA,WAV lossless music decoding chip. support USB/TF card switch,PREV,NEXT,fast forward,fast rewind, volume,EQ,play/pause,stop,single repeat,mute, shutdown and direct election. support Bluetoot PREV,NEXT,volume,EQ,play/pause,mute,turn it off. support FAT16,FAT32 file system.Support for MP1 Layer3,MP2 Layer3,MP3 Layer3 version of the song. Support 32-320 KBPS MP3 songs. support power off memory function: memory play songs and volume before power off. Note: Non-smart phones (android) have to enter the password - 0000 Decoding board play mode instruction Decoding board in the absence of memory card or U disk,boot default to "audio input" mode,the screen display LINE Press "MODE" key on the panel or the remote control switch to bluetooth MODE,the screen shows "BLUE",can open bluetooth search connection at this time Press "MODE" key on the panel or the remote control switch to radio MODE,the screen display FM radio frequency,long press "PLAY" button automatic searching channel Press "MODE" key on the panel or the remote control switch to the U disk or memory card "play MODE",the screen displays the time schedule of the song The remote control instruction: POWER: STANDBY button cannot switch. MODE: TF card and U disk: switching sequence for USB→TF→Bluetooth→FM→AUX;Only U disk: switching sequence for USB→Bluetooth→FM→AUX;Only the TF card: switching sequence for TF→Bluetooth→FM→AUX;There is no USB and TF card: switching sequence for FM→AUX→Bluetooth. PREV: In USB/TF/Bluetooth MODE,short press for PREV;In the USB/SD MODE,long press for fast rewind;In FM MODE, short press for last channel,long press for scan search last channel. NEXT: In USB/TF/Bluetooth MODE,short press for NEXT;In USB/TF MODE,long press for fast forward;In FM MODE,short press for next channel,long press for scan search the next channel. VOL +: short/long press for music. VOL -: short/long press for music. REP:In USB/TF MODE,is the switch key between single repeat and whole cycle when play music,boot for all cycle. STOP: In the USB/TF MODE,short press to STOP the music play. MUTE: MUTE,press for MUTE,press again for relieve(also can relieve by VOL- /VOL+). EQ: Acoustic field MODE.The NORMAL→BAS→POP→ROC→JAZZ→CLA→CUT→NORMAL PLAY/PAUSE: In USB/SD/Bluetooth MODE for PLAY/PAUSE;In the FM MODE,long press for searching all channels and save. Package Include 1 x Decoding board 1 x The remote control (no battery included) 1 x 2P plug wire with power supply reverse connection protection 1 x 3P audio plug thread PAYMENT Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. SHIPPING Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. ABOUT US Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Le 18-mai-21 à 09:53:24 Paris, le vendeur a ajouté les informations suivantes:

12V 4.2 voiture MP3 Bluetooth WMA / WAV carte décodeur Module audio USB SD FM DE Specification Installation pitch: 92 mm wide Installation hole: 83 x 20 x 38 mm Overall dimensions: 107*25*38mm/ 4.21*0.98*1.5 "  Input voltage：7-12V Descriptions 100% Brand New and high quality support bluetooth (Bluetooth3.0 EDR) (after been paired with mobile phones can realize wireless music play) support USB/TF/Bluetooth/FM/LINE switch.MP3/WMA,WAV lossless music decoding chip. support USB/TF card switch,PREV,NEXT,fast forward,fast rewind, volume,EQ,play/pause,stop,single repeat,mute, shutdown and direct election. support Bluetoot PREV,NEXT,volume,EQ,play/pause,mute,turn it off. support FAT16,FAT32 file system.Support for MP1 Layer3,MP2 Layer3,MP3 Layer3 version of the song. Support 32-320 KBPS MP3 songs. support power off memory function: memory play songs and volume before power off. Note: Non-smart phones (android) have to enter the password - 0000 Decoding board play mode instruction Decoding board in the absence of memory card or U disk,boot default to "audio input" mode,the screen display LINE Press "MODE" key on the panel or the remote control switch to bluetooth MODE,the screen shows "BLUE",can open bluetooth search connection at this time Press "MODE" key on the panel or the remote control switch to radio MODE,the screen display FM radio frequency,long press "PLAY" button automatic searching channel Press "MODE" key on the panel or the remote control switch to the U disk or memory card "play MODE",the screen displays the time schedule of the song The remote control instruction: POWER: STANDBY button cannot switch. MODE: TF card and U disk: switching sequence for USB→TF→Bluetooth→FM→AUX;Only U disk: switching sequence for USB→Bluetooth→FM→AUX;Only the TF card: switching sequence for TF→Bluetooth→FM→AUX;There is no USB and TF card: switching sequence for FM→AUX→Bluetooth. PREV: In USB/TF/Bluetooth MODE,short press for PREV;In the USB/SD MODE,long press for fast rewind;In FM MODE, short press for last channel,long press for scan search last channel. NEXT: In USB/TF/Bluetooth MODE,short press for NEXT;In USB/TF MODE,long press for fast forward;In FM MODE,short press for next channel,long press for scan search the next channel. VOL +: short/long press for music. VOL -: short/long press for music. REP:In USB/TF MODE,is the switch key between single repeat and whole cycle when play music,boot for all cycle. STOP: In the USB/TF MODE,short press to STOP the music play. MUTE: MUTE,press for MUTE,press again for relieve(also can relieve by VOL- /VOL+). EQ: Acoustic field MODE.The NORMAL→BAS→POP→ROC→JAZZ→CLA→CUT→NORMAL PLAY/PAUSE: In USB/SD/Bluetooth MODE for PLAY/PAUSE;In the FM MODE,long press for searching all channels and save. Package Include 1 x Decoding board 1 x The remote control (no battery included) 1 x 2P plug wire with power supply reverse connection protection 1 x 3P audio plug thread Moyen de paiement Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. Livraison Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Conditions de vente Sur nous Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Specification Installation pitch: 92 mm wide Installation hole: 83 x 20 x 38 mm Overall dimensions: 107*25*38mm/ 4.21*0.98*1.5 "  Input voltage：7-12V Descriptions 100% Brand New and high quality support bluetooth (Bluetooth3.0 EDR) (after been paired with mobile phones can realize wireless music play) support USB/TF/Bluetooth/FM/LINE switch.MP3/WMA,WAV lossless music decoding chip. support USB/TF card switch,PREV,NEXT,fast forward,fast rewind, volume,EQ,play/pause,stop,single repeat,mute, shutdown and direct election. support Bluetoot PREV,NEXT,volume,EQ,play/pause,mute,turn it off. support FAT16,FAT32 file system.Support for MP1 Layer3,MP2 Layer3,MP3 Layer3 version of the song. Support 32-320 KBPS MP3 songs. support power off memory function: memory play songs and volume before power off. Note: Non-smart phones (android) have to enter the password - 0000 Decoding board play mode instruction Decoding board in the absence of memory card or U disk,boot default to "audio input" mode,the screen display LINE Press "MODE" key on the panel or the remote control switch to bluetooth MODE,the screen shows "BLUE",can open bluetooth search connection at this time Press "MODE" key on the panel or the remote control switch to radio MODE,the screen display FM radio frequency,long press "PLAY" button automatic searching channel Press "MODE" key on the panel or the remote control switch to the U disk or memory card "play MODE",the screen displays the time schedule of the song The remote control instruction: POWER: STANDBY button cannot switch. MODE: TF card and U disk: switching sequence for USB→TF→Bluetooth→FM→AUX;Only U disk: switching sequence for USB→Bluetooth→FM→AUX;Only the TF card: switching sequence for TF→Bluetooth→FM→AUX;There is no USB and TF card: switching sequence for FM→AUX→Bluetooth. PREV: In USB/TF/Bluetooth MODE,short press for PREV;In the USB/SD MODE,long press for fast rewind;In FM MODE, short press for last channel,long press for scan search last channel. NEXT: In USB/TF/Bluetooth MODE,short press for NEXT;In USB/TF MODE,long press for fast forward;In FM MODE,short press for next channel,long press for scan search the next channel. VOL +: short/long press for music. VOL -: short/long press for music. REP:In USB/TF MODE,is the switch key between single repeat and whole cycle when play music,boot for all cycle. STOP: In the USB/TF MODE,short press to STOP the music play. MUTE: MUTE,press for MUTE,press again for relieve(also can relieve by VOL- /VOL+). EQ: Acoustic field MODE.The NORMAL→BAS→POP→ROC→JAZZ→CLA→CUT→NORMAL PLAY/PAUSE: In USB/SD/Bluetooth MODE for PLAY/PAUSE;In the FM MODE,long press for searching all channels and save. Package Include 1 x Decoding board 1 x The remote control (no battery included) 1 x 2P plug wire with power supply reverse connection protection 1 x 3P audio plug thread PAYMENT Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. SHIPPING Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Terms of Sale ABOUT US Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Le 19-avr.-21 à 09:17:21 Paris, le vendeur a ajouté les informations suivantes:

TECHNOMATE TM-7100 HD HD Satellite Receiver LIVRE SANS DISQUE DUR AVEC TELECOMMANDE.  Manque CACHE DU DISQUE DUR. Technomate TM-7100 HD 2x CI, 2x Cardreader, Twin Tuner (DVB-S), HDTV (MPEG-4), USB-PVR, COMBO (DVB-S/DVB-T Tuner), Ethernet Receiver Type: High Definition Producer/Manufacturer - Hersteller: Technomate Production Year:   2009   Detailed Description: Technomate TM-7100 HD  7100 Triple tuner 2xS2 +1xT1 tuner   ©   High Definition Satellite & Terrestrial Receiver (Terrestrial is MPEG-4, DVB-T2, BBC HD and ITV HD ch4 HD)    3 Tuners: 2x Satellite HD Tuners & MPEG-4 HD Terrestrial Tuner + Internal 3-5 and 2.5 seta hard disk up to 1TB   Specification 1. Record 3 channels & watch 1 2. 2x Smart Card readers 3. 2x Common interface 4. 2x USB PVR Ports (1x Front & 1x Rear) 5. Choice of 2 remote frequencies by software 6. Compatible with up to 1TB HDD (optional) 7. RGB Loop, Component output, optical audio 8. Dolby Digital+ 9. RF modulator 10. 10000 channels 11. Hardware blind search 12. Ethernet Port --------------------------------- 2 High Definition Tuners: DVB-S/DVB-S2 Satellite & DVB-T2 Terrestrial Compliant (MPEG-2 / MPEG-4 / H.264) 576i & 576p, 720p & 1080i 1080P supported 2 Smart Card Reader 2 Common Interfaces (2CI) HDMI & Component Output (YPbPr) with Hardware Upscaler to Improve Picture Quality Very Fast & Detailed Hardware Blind Search (power scan) Ethernet Communication Port eSATA Port 2x USB Ports (Front + Rear Ports) PLL type RF-Modulator (Ch. 21- 69) and UHF tuning function 10,000 TV & Radio Channels USB 2.0 PVR Ready via USB External Device USB PVR Features: Rewind/Forward, Slow Motion Rewind/Forward, Timeshift (Pause Live TV) & Record Scrambled/Free-To-Air (FTA) Channels & Record current channel and playback a recording at the same time Music player & JPEG viewer via USB 2.0 Fast Software & Channel List download via USB 2.0 2 Scart Outputs with RGB Support Fully Featured VFD text Front Panel Display Super Sensitive tuner for very weak signals Dolby Digital Optical S/PDIF Dolby Digital by HDMI S-Video Output Less than 1 second channel change DiSEqC 1.0, 1.1, 1.2 & 1.3 (USALS) compatible Auto Navigation system – select as many satellites as you want to search On-screen display with true full color resolution Enhanced 16 Favorite channel groups Channel control by: Favorites, Lock, Skip, Move & Delete Channel sort by: All, Alphabet, Transponder & CAS Parental, Installation & Receiver Lock Multilingual OSD Menu: English, Spanish, Portuguese, French, Dutch, German, Italian, Turkish, Arabic, Russian, Greek, Czech, Romanian, Persian Fast & Easy-To-Use Menu System Extended EPG and program reservation on EPG Teletext & Subtitle by OSD and VBI Last channel memory function Factory default channel list Various games Software & channel list upgrade via RS-232C: PC to STB, STB to PC, STB-STB and USB Zoom function on Pause & Live channel Multi picture display Support for multiple language broadcasts SCPC & MCPC receivable from C/Ku band satellites LNBs supported: Universal, Single, Single S & C band wideband LNBs Multi TV Standards supported: PAL G, I, K, M 4:3 & 16:9 Screen Formats 90-250V AC 50/60 Hz LNB Short Circuit protection onboard Software & channel list upgrade via RS-232C: PC to STB, STB to PC, STB-STB and USB Dimension 390mm x 262mm x 67mm Options TM-7100 2XS2 Tuners +one T1 tuner TM-7100 Do not suport 1080p-dvx-t2 Optional AV in for TM-7102 --------------------------------- TM-7102 Technical Specifications Features Multiple Tuner support (Two Satellite and One Terrestrial) Compliant MPEG-II/ MPEG-IV/ H.264. Compliant DVB-S/ S2 satellite standard & DVB-T/T2 standard Output resolution in 576i,576p,720p, 1080i & 1080p 1 HDMI output(1.2a) On-screen display with true color full resolution. Multisatellite search. DiSEqC control version 1.0, 1.1, 1.2 and USALS compatible. Enhanced 16 favorite channel groups. Powerful channel control by favorites, lock, skip, move and delete function. Channel sort by alphabet, transponder and CAS. Multilingual GUI (OSG & Menu): English, Spanish, Portuguese, French, German, Italian, Turkish, Arabic, Persian, Russian, Rumania. Installation wizard Extended EPG and program reservation on EPG. Teletext & Subtitle by OSD and VBI Last channel memory function. Total 10,000 channels programmable. Preprogrammed channels (Optional) Dolby digital audio output (S/PDIF and through the HDMI), SPDIF Latency function Component output (YPbPr) Various games Software & channel database upgrade via RS-232C: PC to STB/ STB to PC. Parental lock / Installation lock / receiver lock. Zoom in function on pause live channel Multipicture display. Video color adjustment function. High speed software upgrade via USB 2.0 MP3 play and JPEG viewer by USB flash drive 2 common interface and 2 card reader support Elegant VFD display PVR ready by HDD (Support 2.5” HDD & 3.5” HDD rack for easy HDD installation) Support 2 USB Port on Front Panel & Rear Panel LAN 10/100Mbps Ethernet Standby consumption A/V Input (Support External device input) – optional   Specifications TUNER & CHANNEL 2 Satellite Input connector F-type, IEC 169-24, female Loop through connector F-type, IEC 169-24, female Frequency range 950 MHz ~ 2150 MHz Input impedance 75? unbalance Signal level -25 to -69dBm LNB power & Polarisation 14V/18.5V, Max. 400mA 22 KHz tone (22±2)KHz, (0.6±0.2)V DISEqC control Version 1.0 &1.2 Compatible, USALS Demodulation QPSK, 8PSK Input symbol rate DVB-S: 1 ~ 45 Ms/s DVB-S2: 10 ~ 30Msps (QPSK,8PSK) FEC decode DVB-S: 1/2, 2/3, 3/4, 5/6 and 7/8 DVB-S2:1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 (QPSK). 3/5, 2/3, 3/4, 5/6, 8/9, 9/10 (8PSK) 1 Terrestrial Frequency Range 50.5MHz ~430MHz(VHF), 431MHz ~ 858MHz(UHF) Signal Level -78 ~ -25 dBm IF Bandwidth 7,8MHz(-3dB) switchable by software Input Impedance 75? Waveform OFDM(DVB-T & DVB-T2) Carrier Mode DVB-T: 2K, 8K, DVB-T2: 1K,2K,4K,8K,16K & 32K Code Rate DVB-T: 1/2, 2/3, 3/4, 5/6, 7/8 DVB-T2: 1/2, 3/5, 2/3,3/4,4/5, 5/6 Guard Interval DVB-T: 1/4, 1/8, 1/16, 1/32 DVB-T2: 1/4, 5/32, 1/8, 5/64, 1/16, 1/32, 1/64, 1/128 MPEG Transport Stream & A/V Decoding Transport stream MPEG-II ISO/IEC 13818 Profile level MPEG-II MP@ML, MPEG-IIMP@HL, MPEG-IV AVC/ H.264 HP@L4.0 Input rate Max. 15Mbit/s Video formats 4:3 Letterbox, 4:3 Pan & Scan, 16:9 Video resolution 720 x 576, 720 x 480, 1920 x 1080i, 1280 x 720P Audio decoding MPEG/ Musicam Layer ?&? Audio mode Stereo/ Joint stereo/ Mono Sampling rate 32KHz, 44.1KHz and 48KHz Main System Main processor 32 bit superscalar RISC CPU Memory Flash-Rom: 8Myte DDR DRAM: 1Gbit X 2 EEPROM: 256Kbit Conditional Access Interface PCMCIA 2 Slot (DVB Common Interface Standard) Smart Card Reader 2 Slot A/V In/Out TV SCART Video output (CVBS,RGB) • Audio output (L,R) VCR SCART A/V output (CVBS, L/R) A/V input (CVBS, RGB, L/R) Video RCA/ Cinch, Video output (CVBS) Component output (YPbPr) HDMI (High Definition Multimedia Interface) Audio L/R RCA/ Cinch, Volume and Mute control S/PDIF Optical digital audio output Data Port RS-232C Transfer rate 115Kbps, 9 pin D-sub type USB USB 2.0 Host (Support 2 USB Port on Front Panel & Rear Panel) LAN 10/100 Mbps Ethernet Power Supply Input voltage AC100-250V, 50/60Hz Type SMPS (Switching Mode Power Supply) Power consumption Standby Protection Separate Internal Fuse (The input shall have lighting protection) General Data Dimensions (W x D x H) 390 x 73 x 283 mm Weight ca 3,500 g Operating temperature 0°C ~ +45°C Storage temperature -10°C ~ +70°C  

ROTEL RA-1592. État: Occasion en parfaite condition, aucunes trace d’usure, le rodage vient tout juste d être terminer avec 100h d écoutes. Vendu avec la télécommande et sans la boîte d origine. The RA-1592 Integrated Amplifier leverages the strengths of our award winning RC-1590 preamplifier and RB-1582 MkII power amplifier in a sleek single chassis design. DIMENSIONS (W × H × D) 431 × 144 × 425mm 17" × 5.7" × 16" FRONT PANEL HEIGHT 3U / 132.6mm (5.25") POWER REQUIREMENTS 230V, 50Hz POWER CONSUMPTION 500W STANDBY POWER CONSUMPTION NET WEIGHT 16.8kg (37lbs.) BTU RATING 1239 BTU/h CONTINUOUS POWER OUTPUT 200W/Ch (All channels driven, 8Ω) TOTAL HARMONIC DISTORTION (THD) (20Hz–20kHz) FREQUENCY RESPONSE Line Level Inputs: 10Hz - 100kHz ±0.5dB Digital Inputs: 10Hz - 90kHz ±2dB Phono Input: 20Hz - 20kHz ±0.5dB S/N RATIO (IHF "A" Weighted) Line Level Inputs: 103dB Digital Inputs: 102dB Phono Input: 80dB There has never been a better time to be a music lover. Today’s source options provide limitless audiophile quality music. CD-or-better quality streaming, high resolution download sites, inexpensive mass storage devices, the still resilient CD and the resurgence of classic vinyl are all providing a wealth of content at impressively high fidelity. To hear all this music as the artist intended requires an extraordinarily flexible, sonically capable component. The RA-1592 Integrated Amplifier is exactly that component. It leverages the strengths of our award winning RC-1590 preamplifier and RB-1582 MkII power amplifier in a sleek single chassis design. With a powerful 200 watt per channel Class AB amplifier using performance audio grade components, the RA-1592 can effortlessly drive large speaker systems. The impressive Rotel manufactured toroidal transformer is a key element in the power supply design which also includes custom slit-foil storage capacitors and a dual-monoblock topology. All of this helps to ensure the amplifier performance stands up to even the most complex music and real world playback conditions. To complement the amplifier section, the RA-1592’s preamplifier incorporates the superb 32-bit/768kHz AKM digital-to-analogue converter (DAC) and analogue stages of the highest quality. The DAC and surrounding circuitry supports a vast array of source inputs including DSD capable PC-USB (24-bit/192kHz), 3 coaxial, 3 optical, integrated aptX® Bluetooth and front mounted USB iPod input. In recognition of the faithful analogue music lovers, there is a phono stage input (MM), XLR balanced input and 3 analogue RCA source inputs. User selectable A-B speaker outputs with 5-way binding posts, RCA pre-output and dual subwoofer outputs provide the ultimate flexibility in installation. The amplifier protection circuits monitor DC offset, overcurrent, short circuit and temperature to protect both the electronics and attached speakers. Custom integration features include RS232 and Ethernet IP control, 2 trigger outputs, remote IR input and automated digital signal sense power control for easy integration with streaming sources and control systems. The RA-1592 is the finest integrated amplifier yet in Rotel’s 55 year history of producing performance audio components.