Between class

Great Italian all tube guitar head, kept as a backup, hardly a few hours of play since new, non smoking home. With original box. Priced new in Europe at 439€ direct manufacturer price  baroni-lab.eu/shop/ampli/heads/lucas-bl05-class/ The amp lights up red when on. European power cable included. If you are in the UK I will include a UK mains cable instead. From the manufacturer: The ‘Lucas BL05’ is a class A, single channel, all tube amplifier. It utilizes 1 x 12AX7/ECC83 and 1 x 12AU7/ECC82 pre-amp tubes and one JJ el84 in the power amp. With a combination of pre-amp ‘volume gain’ and a ‘master volume’ control the ‘Lucas BL05’ can create great, rich natural overdrive at lower volumes or crisp, articulate cleans with good headroom and everything else in between. Take the ‘volume gain’ past 12 o’clock and the sweet sound of a naturally overdriven tube amp starts to kick in. Past this point the amp will break up more and more taking you from an edgy blues twang all the way through to an authentic classic rock crunch. Accompanied by a very responsive 3 band EQ, presence control and high/low gain inputs there are many tone shaping possibilities with this amp. Controls: Volume, Gain, Bass, Middle, Treble, Presence, Standby switch, Power switch, 8/4 ohm selector switch Power Output: 5W (RMS) into 8,4 Ohms Voltage: 110-120v/220-230v, 50/60Hz Size: 242*440*210 (mm) Packing Size: 337*535*305 (mm) Weight: 7.9 kg Gross Weight: 9.3 kg

Rare paire Luxman C300 et M300:Amplificateur et préamplificateur (avec phono). État : "Occasion" En excellent état de fonctionnement, notez qu' il faudra remplacer une ampoule du voyant Led  "classe A". Voltage 220V. Les deux appareils sont visibles chez Jefferson Hifi à Pérouse où je les ai déposés. Livraison possible en France, en Europe,etc nous consulter pour les frais d'envoi internationaux. Le M300 a été produit en même temps que la série C300. Je crois qu’il n’en a été produit que 2000 dans le monde. C’est non seulement une paire de collection, mais le haut de gamme des luxman des années 1980. Ils sont les dernières combinaisons pré/ampli, à avoir été fabriquées sans implication de Alpine(qui a ensuite  modifié sérieusement la qualité Luxman  hélas.). ils ont été primés "produit de l'année" au début des années 80.  Le M300 se laisse utiliser soit en classe A, où il développe 2x42 w sous 8 ohms en classe A, ou alors 172w en classe AB sous 8 ohms. Comme toujours chez Luxman, on peut espérer une dizainede watts supplémentaires dans chaque modes, vu qu'ils utilisent unsystème de mesure très strict sur leurs fiches techniques. Il faut surtout savoir qu’il ne faut basculer de classe AB en classe A que à l’arrêt, en redémarrage à froid.  Voici  les caractéristiques techniques (https://audio-database.com/LUXMANALPINE-LUXMAN/amp/m-300-e.html) et https://audio-database.com/LUXMANALPINE-LUXMAN/amp/c-300-e.html 1)Préampli C300: Frequency response: 0.5Hz to 140kHz   Total harmonic distortion: 0.005% Input sensitivity: 0.09mV (MC), 2mV (MM), 140mV (line)      Signal to noise ratio: 80dB (MM), 100dB (line) Output: 140mV (line), 1V (Pre out), 20V (Pre out Max)  Dimensions: 478 x 163 x 384mm     Weight: 9kg 2)amplificateur M300 Form Duo beta plusX poweramplifier Succession effectiveoutput (20Hz - 20kHz, both channel simultaneous operation) Class-A: 40W+40W (8ohms) AB class: 270W+270W (4ohms) 170W+170W (8ohms) THD (8 ohms) 20Hz- 20kHz-3dB Class-A: 0.005% or less AB class: 0.005% or less Cross modulationdistortion (8 ohms) 60Hz: 7kHz=4:1, -3dB Class-A: 0.005% or less AB class: 0.005% or less Output bandwidth Class-A: 10Hz-100kH-3dB(0.015% of distortion) AB class: 10Hz - -100kHz three dB(0.04% of distortion) Frequency characteristic 10hz-100kHz-1dB (aClass-A and AB class) Input sensitivity Class-A: 0.45V ABclass: 1V Input impedance 50kohm (a Class-A and ABclass) SN ratio (IHF-Acorrection) Class-A: 115dB ABclass: 120dB Remains noise (IHF-Acorrection) 30 microvolts (a Class-Aand AB class) Dumping factor 120 (1kHz, 8 ohms, aClass-A, and AB class) Protection network DC drift detectionspeaker protection network Overcurrent detection amplifierprotection network Attachment Circuit operationswitchpoint (indicator) Peek indicator Inputattenuator Headset jack Speaker-off switchpoint(indicator) Line phase sensor Supply voltage AC100V, 50Hz/60Hz Power consumption (Electrical Appliance and Material Control Law) Class-A: 420W ABclass: 430W Dimensions Width 478x height 214xdepth of 484mm Weight 30kg Stereo power amplifier which adopted the Duo beta plusX circuitry. In order to control NFB of an amplifier circuitry appropriately, the Duo beta circuitry was developed and it is adopted as M-300. After this makes amplifier to the extent that it is used also from a nakedness property as it was, it adds proper-quantity NFB and DC servo as finish of a tone quality, and is suppressing the transitional distortion of a supression of play sound, TIM, etc. by superfluous NFB etc. Furthermore, in M-300, the thought of a suitable control is introduced also into a power circuit, and it is considered as the power-source Duo beta plusX. At plusX, the stability of a comfortable tone quality and an operation is reconciled because the bottom gives controlling force calmly on the assumption that a generous power-source part. M-300 can change and use a Class-A and AB class. The Class-A operation has a structure which amplifies a signal wave form as it is. Therefore, it becomes unrelated to switching distortion or crossover distortion, and does not have the cause that it is distorted in addition to an element's own linearity. In M-300, the Class-A operation excellent in adopting a Duo beta as LAPT which excelled [element] in the high region property, and an amplifier circuitry, and adopting plusX as a power circuit is realized. In AB class, Oide power which drives transitional distortion below into a limit of measurement in pursuit of a nakedness property also in an operation, and is not made in a Class-A operation on it is realized. At the time of a switching of a Class-A / AB class, in a performance, sound does not break off and a noise is not generated, either. Circuitry constituted all the amplification stages from a push-pull circuit from the input stage to the output stage, and the amplifier which was excellent in the nakedness property which will be the requisite for a Duo beta circuitry is realized. The pre-driver stage is making the input stage the transistor which was excellent in the high region property with the cascode interconnection with the stream composition of the cascode bootstrap and the differential push pull by complimentary FET of a Pch type and a Nch type. And the driver stage and the power stage are considered as the push pull stream composition by a three-step Darlington connection. A linearity makes an output element high speed power transistor linear arithmetic processor-T which was well excellent in the high region property with a triple push pull stream composition, and the electric current is sent. In this way, the static characteristics and the dynamic behavior improved. And proper-quantity NFB and DC servo are added. The power-source part had the twin monophonic stream composition of right-and-left full independence, and has acquired the merit of a linearity covering all the bands, and the outstanding crosstalk property. The power transformer is performing and using the coil mandatory adopted and put into practice among the object for Rch, and two Lch. First, the power stage and the drive stage were made into another coil, and also the primary side and secondary side has unified the orientation of a coil. This is because it is checking having influence on play sound with the potential (polarity) which a transformer begins to roll, rolls and the last each has between opposite groundings. Moreover, four right and left adopt the type only with a capacity of 12,000 micro F for an audio as a filter capacitor, and low-impedance-ization of the power-source part is attained to it. In order to cope with the rush current which becomes large as the capacity of a power-source part becomes large, the rushes current preventing circuitry is adopted. The speaker protection network and the amplifier protection network are carried. The internal organs of the speaker protection network which detects DC output in an output-terminal and separates an output are carried out. Furthermore, when the speaker code etc. short-circuits, even if there is a big input, an amplifier circuitry is protected or the electric-current preventing circuitry is carried. After the elements currently used examine, it is using it, carrying out a tone-quality mandatory strictly uniquely. The film capacitor generally called non-polar is also arranging a polarity etc., and the capacitor is carrying out the tone-quality mandatory strictly. Moreover, the precision succession good transformation Detent volume excellent in the tone quality and a feeling of an operation is adopted as input attenuator. Furthermore, in terminals, the small gilding pin jack of contact resistance was adopted as the input terminal, and the large-sized screw type is adopted as a speaker termination. The product line was packed into the shortest distance, and also it has chosen high materials of the tone-quality effect, such as a shielded cable of oxygen free high conductivity copper and 500 core. Moreover, in order to suppress an elevation of the source impedance of the pattern side of a substrate, the power bus by a copper plate was adopted and the performance of a power source is employed efficiently. The line phase sensor is carried, by the functionality which detects this polarity, the polarity of the equipment was unified and the tone quality is improved. The indicator turned on at the clipping point of an output is carried, and a peek can be supervised.

TWS Casque sans fil Bluetooth Écouteurs Écouteurs intra-auriculaires Pr iPhon DE Specification: Driver: 15mm Impedance: 32 OHM Bluetooth version: Bluetooth 4.2 + EDR Bluetooth use band: 2.4GHz Power level: CLASS II Output power: 30mW Bluetooth distance: 10 meters barrier Frequency response: 20-20000Hz Operating voltage range: 3.0V-4.2V Mic sensitivity: -42dB Talk time: about 3-5 hours Music time: about 3-5 hours Standby time: about 100 hours Size: 12 * 9 * 7cm Weight: 0.2kg Feature: 1.With A2DP / AVRCP high quality stereo audio transmission and remote control protocol 2.Powerful noise de-noising circuit (active noise reduction) 3.Switch between Chinese and English (boot does not connect Bluetooth state, press the switch 2 times, hear the tone switch successfully) Package Including: 2 x mini Bluetooth Headphones(left and right earphones) 1 x Charging box 1 x USB Charging Cable 1 x User Manual   Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Si vous n'êtes pas satisfait de votre achat, contactez-nous sans hésiter. Les articles peuvent être retournés dans 30 jours en état inutilisé, nous effectuerons un échange et un remboursement une fois que nous aurons reçu l'objet. Gardez les étiquettes entières et les éléments propres sans saveur, si non nous n'accepterons pas le retour. Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Specification: Driver: 15mm Impedance: 32 OHM Bluetooth version: Bluetooth 4.2 + EDR Bluetooth use band: 2.4GHz Power level: CLASS II Output power: 30mW Bluetooth distance: 10 meters barrier Frequency response: 20-20000Hz Operating voltage range: 3.0V-4.2V Mic sensitivity: -42dB Talk time: about 3-5 hours Music time: about 3-5 hours Standby time: about 100 hours Size: 12 * 9 * 7cm Weight: 0.2kg Feature: 1.With A2DP / AVRCP high quality stereo audio transmission and remote control protocol 2.Powerful noise de-noising circuit (active noise reduction) 3.Switch between Chinese and English (boot does not connect Bluetooth state, press the switch 2 times, hear the tone switch successfully) Package Including: 2 x mini Bluetooth Headphones(left and right earphones) 1 x Charging box 1 x USB Charging Cable 1 x User Manual PAYMENT Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. SHIPPING Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Terms of Sale Si vous n'êtes pas satisfait de votre achat, contactez-nous sans hésiter. Les articles peuvent être retournés dans 30 jours en état inutilisé, nous effectuerons un échange et un remboursement une fois que nous aurons reçu l'objet. Gardez les étiquettes entières et les éléments propres sans saveur, si non nous n'accepterons pas le retour. ABOUT US Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Le 02-déc.-20 à 08:14:43 Paris, le vendeur a ajouté les informations suivantes:

TWS Casque sans fil Bluetooth Écouteurs Écouteurs intra-auriculaires Pr iPhon RD a.imagelink {color:#000006;} a:hover.imagelink {color:#000006;} a:visited.imagelink {color:#8f8f8f;} a.imagelink img.auctionimage { border: 2px solid #000006; } a:visited.imagelink img.auctionimage { border: 2px solid #8f8f8f; } Description Specification: Driver: 15mm Impedance: 32 OHM Bluetooth version: Bluetooth 4.2 + EDR Bluetooth use band: 2.4GHz Power level: CLASS II Output power: 30mW Bluetooth distance: 10 meters barrier Frequency response: 20-20000Hz Operating voltage range: 3.0V-4.2V Mic sensitivity: -42dB Talk time: about 3-5 hours Music time: about 3-5 hours Standby time: about 100 hours Size: 12 * 9 * 7cm Weight: 0.2kg Feature: 1.With A2DP / AVRCP high quality stereo audio transmission and remote control protocol 2.Powerful noise de-noising circuit (active noise reduction) 3.Switch between Chinese and English (boot does not connect Bluetooth state, press the switch 2 times, hear the tone switch successfully) Package Including: 2 x mini Bluetooth Headphones(left and right earphones) 1 x Charging box 1 x USB Charging Cable 1 x User Manual Payment Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. Shipping Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Terms of Sale About Us Si vous n'êtes pas satisfait de votre achat, contactez-nous sans hésiter. Les articles peuvent être retournés dans 30 jours en état inutilisé, nous effectuerons un échange et un remboursement une fois que nous aurons reçu l'objet. Gardez les étiquettes entières et les éléments propres sans saveur, si non nous n'accepterons pas le retour. Specification: Driver: 15mm Impedance: 32 OHM Bluetooth version: Bluetooth 4.2 + EDR Bluetooth use band: 2.4GHz Power level: CLASS II Output power: 30mW Bluetooth distance: 10 meters barrier Frequency response: 20-20000Hz Operating voltage range: 3.0V-4.2V Mic sensitivity: -42dB Talk time: about 3-5 hours Music time: about 3-5 hours Standby time: about 100 hours Size: 12 * 9 * 7cm Weight: 0.2kg Feature: 1.With A2DP / AVRCP high quality stereo audio transmission and remote control protocol 2.Powerful noise de-noising circuit (active noise reduction) 3.Switch between Chinese and English (boot does not connect Bluetooth state, press the switch 2 times, hear the tone switch successfully) Package Including: 2 x mini Bluetooth Headphones(left and right earphones) 1 x Charging box 1 x USB Charging Cable 1 x User Manual PAYMENT Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. SHIPPING Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Terms of Sale ABOUT US Si vous n'êtes pas satisfait de votre achat, contactez-nous sans hésiter. Les articles peuvent être retournés dans 30 jours en état inutilisé, nous effectuerons un échange et un remboursement une fois que nous aurons reçu l'objet. Gardez les étiquettes entières et les éléments propres sans saveur, si non nous n'accepterons pas le retour. Le 03-juin-21 à 10:32:18 Paris, le vendeur a ajouté les informations suivantes:

I'm selling this MATRIX X-SABRE PRO MQA DAC, one of the best sounding dacs I have ever owned, and i have owned quite a few in my lifetime !  It is in perfect condition, just as new (i take very good care of my audio gear), and comes with a usb cable and a power cord. It also comes with a remote control. I'm selling it with regret, but i am going to upgrade for a much more expensive dac/streamer. I hope the one i get will sound as good as the Matrix !  It is one of the best rated dacs by the audio science review ! (See article below) It can read any audio files, including mqa from a lot of sources (streamers) with a musicality that will put chivers to your spine ! You can ear each instrument very clearly and with a lot of detail but no harshness. It retails at 2200 euros, i'm selling it at 1400. It's a bargain for music lovers ! Cheers ! Service de livraison : Colissimo The Matrix gets a lot of positive reviews in the audiophile community. Just check it out: https://www.audiosciencereview.com/forum/index.php?threads/matrix-audio-x-sabre-pro-mqa-best-audio-dac-in-the-world.8729/ Steve Guttenberg's video review: https://www.youtube.com/watch?v=IUZCGOoxLSU Unboxing video: https://www.youtube.com/watch?v=4qIvDWqPN9o The Matrix Audio X-Sabre Pro MQA is beautifully made, putting to shame many products in its price range. It oozes class and quality. That beauty runs deep when it comes to performance as Matrix Audio X-Sabre Pro MQA unseats its own brother to take the crown of the best DAC I have ever measured. Considering that the list now includes nearly 160 DACs, this is an incredible achievement. I met the team behind Matrix Audio at the last audio show and you have not seen a more soft-spoken, unassuming team of engineers than them. None of the ego that is so prevalent in high-end audio. The company is active here and on some other forums. And of course volunteers to have its products tested by us, rather than hiding in the bushes. So they score high on both product and customer service. Needless to say, it is my absolute pleasure to recommend the Matrix Audio X-Sabre Pro MQA. We are here to find the best engineered audio products and the Matrix Audio Proves that it is among a handful of companies to produce such trophy class products one after the other. It put a huge smile on my face after testing it, one that will be hard to erase! Description Matrix Audio, in partnership with MQA Ltd., has created the MQA-supported X-SABRE Pro audio DAC to let you experience the abundant music details in the artists' recording room. X-SABRE Pro is an MQA-enabled DAC which can fully decode the original MQA files without any assistance from third party software (MQA Core Decode). Powerful Hardware Platform X-SABRE PRO (MQA) used the ES9038PRO advanced 8-channel D/A chip, and its inner DSP unit and analog circuit have the high performance and better user experience. The new generation XMOS XU216 USB asynchronous transfer interface and new AK4118 S/PDIF receiver chip, with powerful computing performance and multi-channel processing performance, make X-SABRE Pro (MQA) has excellent digital audio conversion capability. IIS Port X-SABRE Pro (MQA) is equipped with the most complete input ports of this series, in addition to optical, coaxial, AES/EBU, USB ports, we even added a IIS·LVDS input via a HDMI connector to differential transmit IIS signal, maximize the transmission performance of the IIS port, to make the data from the short-distance transmission between the chips into high-speed interconnection between the devices, get rid of the USB transmission or S/PDIF transmission re-encoding, and let the original digital audio stream directly into the D/A chip. More Sampling Rate Supported X-SABRE PRO(MQA) can support the Master Quality Authenticated coding technology developed by UK MQA Limited which can decode the MQA audio s

Focusrite Saffire Pro 14, Interface audionumérique FireWire - jamais utilisé.  CD d'installation fournie. 1 x câble Firewire -> Firewire fourni. Fiche technique   Fabricant:Focusrite Modèle:Saffire Pro 14 Série:Saffire Catégorie:Interfaces audionumériques FireWire Fiche créée le:11/08/2010 Microphone Inputs 1-2 Frequency Response: 20Hz - 20kHz +/- 0.2 dB Gain Range: +13dB to +60dB Maximum Headroom +8dBu THD+N: 0.001% (measured at 1kHz with a 20Hz/22kHz bandpass filter) Noise EIN: 124dB analogue to digital (measured at 60dB of gain with 150 Ohm termination (20Hz/22kHz bandpass filter) Input Impedance: 2k Ohm Line Inputs (Inputs 1-2) Frequency Response: 20Hz - 20kHz +/- 0.2dB Gain Range: -10dB to +36dB THD+N: 0.001% (measured with 0dBFS input and 22Hz/22kHz bandpass filter) Noise: -90dBu (22Hz/22kHz bandpass filter) Input Impedance: >10k Ohm Line Inputs 3-4 Frequency Response: 20Hz - 20kHz +/- 0.2 dB Gain Range: Switch-able between +16dBu or -10dBV for 0dBFS (balanced inputs) THD+N: 0.003% (measured at 1kHz with a 20Hz/22kHz bandpass filter) Noise: -100dBu (22Hz/22kHz bandpass filter) Input Impedance: >10k Ohm Instrument Inputs (Inputs 1 and 2) Frequency Response: 20Hz - 20kHz +/- 0.1dB Gain Range: +13dB to +60dB THD+N: 0.004% (measured with 0dBu input and 20Hz/22kHz bandpass filter) Noise: -87dBu (20Hz/22kHz bandpass filter) Analogue Audio Outputs (Outputs 1-4) 4 Electronically Balanced Outputs Maximum Output Level (0dBFS): +10dBu THD+N: 0.001% (0dBFS input, 20Hz/22kHz bandpass filter) Crosstalk (Channel Isolation) Any input to input: > 100dB Any output to output: > 100dB Any input to output: > 100dB DIGITAL PERFORMANCE A/D Dynamic Range > 109dB (A-weighted), all analogue inputs D/A Dynamic Range > 106dB (A-weighted), all analogue outputs Clock Sources: - Internal Clock - Sync to Word Clock on SPDIF Input (RCA) JetPLLTM PLL technology providing superb jitter reduction for class leading converter performance Clock jitter < 250 picoseconds Supported Sample Rates: 44.1kHz, 48kHz, 88.2kHz, 96kHz 8 input channels to computer: Analogue (4), SPDIF (2) and Loop-back (2) 6 physical output channels from computer: Analogue (4), SPDIF (2) 12 DAW output streams Assignable 18 input by 6 output mixer Weight and Dimensions 1.5kg / 3.3lbs 215mm (W) x 45mm (H) x 220mm (D) (8.5 x 1.8 x 8.7 inches) Connectivity Analogue Channel Inputs (Inputs 1-2) 2 Mic XLR Combo (channels 1-2) on front panel 2 Line 1⁄4” TRS (channels 3-4) on rear panel Automatic switching between Mic / Line (channels 1-2) Switching between Line / Instrument Inputs (channels 1-2) via Saffire MixControl Application Switching between +16dBu (low) and -10dBV (high) gain on inputs 3-4 via Saffire MixControl Application Digital Channel Inputs (Inputs 5-6) 44.1 - 96kHz Stereo S/PDIF input on RCA Analogue Audio Outputs (Outputs 1-4) 4 1⁄4” TRS Jacks Output Level control (analogue) for outputs 1 and 2 Stereo Headphones Mix 1 on 1⁄4” TRS (also routed to Outputs 3 & 4) with independent volume control Digital Channel Outputs (Outputs 5-6) 44.1 - 96kHz Stereo S/PDIF Output on RCA Other I/O 1 6-pin FireWire S400 socket 2 Standard 5-pin DIN MIDI connectors: In and Out DC Power Input Connector (for use with supplied universal input power supply) Front Panel Indicators 2 2 segment input meters, Sig (-18) and O/L (0dBFS) “LKD” Locked Indicator “FW” Host Connected Indicator “Power” Indicator Instrument input source selection LED for channels 1 and 2 Phantom Power (48V) switch and LED for inputs 1 and 2

Le IBP Junior élimine facilement les sons indésirables produits par la combinaison de signaux sonores déphasés ou partiellement déphasés; un outil solutionneur de problème de phase mais aussi comme un outil créatif contrôlant la phase pour modifier la couleur tonale. Permet aux micros d’être placés là oû ils sonnent le mieux individuellement; Ajustement de variable de phase naturelle continue entre 0 degré et 180 degrés; Construction et son audiophile (Class A, headroom énorme, alim surdimensionnée) En parfait état, avec sa boite et doc d'origine. * Real time all analog phase sweep between zero and one hundred and eighty degrees… and everything in-between. * Allows mics to be placed where they sound best individually, compromising mic placement due to phase problems is not necessary when using the ibp. * +4dB XLR balanced input and outputs. * Extremely high quality construction. Made in the U.S.A. The IBP Junior easily eliminate the undesirable hollow sound when combining out-of-phase and partially out-of-phase audio signals. Designed as a phase problem solving device, the IBP Analog Phase Alignment Tool has quickly become popular among audio engineers as not only a «»fix it»» tool but as a controlling audio phase creative, tonal color tool. Whether combining direct and miked signals, acoustic guitar and vocal mics, drum kit tom-tom mics, or multiple split-guitar amps, audio signals phase can be quickly and easily controlled with the Little Labs IBP Junior Analog Phase Alignment Tool. IBP functional Description: Phase adjust bypass does just that, bypassing all phase adjust circuitry. Phase invert is a simple polarity reversal as you would find on a mixing console out is 0 degrees, in is 180 degrees. Phase adjust 90 degrees /180 degrees selects between two stages (button out) or one stage of phase adjust. This allows a more extreme phase adjustment with a full swing of as much as 180 degrees or a less extreme 90 degrees of phase adjustment. Phase center lo/hi selects between a higher bandwidth phase adjust (button out) and a primarily lower frequency phase adjust (button in). This and the phase adjust button create the phase curve. It is important to note phase is frequency dependent and is different than time. For example depending on the two sources you are combining, and whether one source is direct and one is miked- between room reflections distance from the cabinet etc. determines what the curve would need to be. (e.g. you need to get the G note in phase as well the A note). Phase adjust knob determines the degree of phase adjust. The xlr balanced input is designed for balanced line level sources, the xlr output is impedance balanced and should feed line level pin 2 hot balanced or single ended line level inputs with pin 1 earth and pin 2 hot. » En savoir plus Collaboration commerciale.

For sale Oppo HA-1 DAC & headphone amplifier. The amplifier has been very well taken care of (still has the original screen protection film) and is in very good condition (minor imperfection in the upper right corner next to potentiometer - hardly visible, check pics). Exquisite build and fantastic quality. Included:  - Oppo HA-1 DAC & headphone amplifier  - Remote control  - Power cord (EU)  - USB cable  - SPDIF coaxial cable The item will be carefully packed and sent via tracked and insured shipping. HIGH PERFORMANCE AUDIO - Discrete Class A Amplifier A Class A amplifier conducts signal over the entire range of the input signal cycle. The output transistors are biased to operate in their most linear range, and there is no crossover distortion caused by switching the signal between two push-pull devices. The HA-1's power amplification circuit for the headphones is Class A built with discrete transistors. The discrete design allows us to hand-pick and match the best parts to build the HA-1. - Toroidal Power Supply A toroidal power transformer offers superior power efficiency and much lower exterior magnetic fields over traditional laminated steel core transformers. The HA-1's toroidal linear power supply provides a very clean and robust power source to the audio components. - Fully Balanced Design The internal analog audio signal path of the HA-1 is fully balanced. For digital audio, the signal runs in balanced mode all the way from the DAC to the output jacks. Balanced analog input is kept intact, and single-ended input is converted to balanced at the input buffer. All single-ended outputs are derived from the balanced signal as well. The balanced design provides better common-mode noise rejection and improves signal quality. The balanced headphone output provides twice the voltage and four times the power of the single-ended output, enabling the HA-1 to drive the most power hungry headphones. It also provides better channel seperation by eliminating the common ground return path. - ESS Sabre32 Reference DAC The DAC is one of the most important components for digital audio playback. The SABRE32 Reference ES9018 from ESS Technology is the world’s best performing 32-bit audio DAC solution targeted for high-end consumer applications and professional studio equipment. With the ESS patented 32-bit Hyperstream™ DAC architecture and Time Domain Jitter Eliminator, the SABRE32 Reference DAC delivers an unprecedented DNR (Dynamic Range) of up to 135dB and THD+N (Total Harmonic Distortion plus Noise) of -120dB, the industry’s highest performance level that will satisfy even the most demanding audio enthusiast. To learn more about the technologies behind the exceptional performance of the SABRE DAC, please read the SABRE Technical White Paper. OPPO HA-1 4.3" information display - Clean Signal Path The HA-1 uses an analog potentiometer (the familar volume knob) to control the volume. By avoiding re-digitizing the audio signal for volume adjustment, the HA-1 provides a clean signal path for the audio. At the same time, the convenience of modern digital volume control is not lost - a remote-controlled motor turns the volume knob and a 10-bit analog-to-digital converter samples the signal to display a numeric dB level. - Made for iPod®, iPhone® and iPad® The HA-1 passes Apple's "MFi" certification and is compatibile with the latest iPod, iPhone and iPad to be used as the digital audio output accessory of these devices. By tapping directly into the digital audio signal of these devices and converting the audio to analog using the high performance SABRE32 Reference DAC, music from your favorite portable device will sound its best. - Wireless Audio via Bluetooth The HA-1 supports Bluetooth Advanced Audio Distribution Profile (A2DP) with both the standard and aptX® high quality codec. Simply pair your phone with the HA-1 and set music free

Orange AD50 Custom Shop head made in the London UK workshop, handwired by Ade Emsley himself. 2 x 12ax7 preamp, 2 x el34 output Harma cryo treated valves in there at the moment, test good, sounding good Switchable between 30w class A and 50w class AB. 30W is a little sweeter, richer. 50W has slightly more headroom Awesome sounding amplifier A few small marks on tolex, very good condition overall.

Orange AD50 Custom Shop head built in the London UK workshop and handwired by Ade Emsley himself. 2 x 12ax7 preamp, 2 x el34 output Harma cryo-treated valves Switchable between 30w class A and 50w class AB. 30W is a little sweeter, richer. 50W has slightly more headroom. Awesome sounding amplifier at any volume level. A few small marks on tolex, very good condition overall.

THE WORLD'S REFERENCE AUDIOPHILE MAINS FILTER NO REVIEWER OR MUSIC LOVER HAS FOUND BETTER !! RETAIL PRICE: 270 $ 6moons says of Firewall: More organic and fluid, better frequency extremes, layering, impact and weight September, 2017, author: Srajan Ebaen "As anticipated, this whodunnit was easily sorted. What I'll call the X amp [with Firewall modules]–internally in parts, sonically in 'more'–distinguished itself on two levels. The first had to do with raw quantity." "Here [with Firewall modules] the bass was better articulated, front-to-back layering more developed, the treble more suave and vocals were more present." "Describing why the feel was more organic and fluid leads to lazier lengthier decays and background sounds more connected to the foreground. The plain Jane's [without Firewalls] drier take coincided with sharper separation but lacked the more holistic elasticity of the X [with Firewall modules]. One was pricklier and more staccato, the other rounder, smoother and of a more legato persuasion." "[With Firewalls:] better visibility at the frequency extremes and of the imaging precision in general." "The depth layers of X [with Firewall modules] during chorus interludes had superior development. With it the low beats of the Bombay Dub Orchestra had more impact and weight." "One [without Firewalls] was cooler, sharper, more bare boned and lean. The other [with Firewalls] was richer, mellower, smoother and fuller." "[With Firewall modules had] this afterglow quality. Here lingered on a stronger flavour of space, ambiance and calm." "For an alternate take on LessLoss Firewall effects, read Vance Hiner's review of the Echo's End DAC. Between us–and we've not had any exchanges–there's no doubt. These Firewall cards really do the trick." "What today's experiment showed is that it takes no luxury gear at all to hear differences or create improvements." HIFI WIGMAN says:  "Easy to use and does the job without a negative impact on dynamics." May, 2017, author: George Sallit "With the filter in circuit the background noise is significantly reduced and the decay of notes on the guitar are much easier to hear. The soundstage (as it is) was enhanced. Oddly enough the tonal colours also seemed enhanced. The drum kit was not some amorphous thudding but stretched skins being hit gently. I did not quite believe what I was hearing." "With the filter in place, the sound was far more musical." "The 3D soundstage was much bigger and made it easier to differentiate who was doing what." "I then blinked. My notes for the music without the filter were hifi comments, with the filter I was commenting on the music." "Well the filter certainly allowed all the individual elements to be easily heard without any frequency response changes." "All the advantages of mains filters but no loss of dynamics." "The sound was more 3D and it was easier to hear the individual instruments. Also, the drums had a stronger tonal colour than without the filter." "It sounded as though the worse the mix the better the effect." "On the DAC the noise levels were reduced. The tonal colour was much better. The biggest impact was again on the DAC. Was this a weakness in the Audionote DACs? No. I tried the 5x on my Metrum Octave and I heard a similar effect, less noise, more 3D sound, greater tonal colour. Is it possible it only works with NOS DACs? No. Out came my Esoteric DAC with a very similar finding." "The biggest difference was with bright mixes where the 'truthfulness' of the Class D could make things a bit fierce. The 5x filter tamed that and all that was left was a bright mix. There are many reports on the web of people recommending mains treatments for Class D amplifiers. I had not tried that as I was concerned a

Any question to help you to finalize your choice, please ask. Thank you Japanese TRN Super 12 - Integrated Tube Amplifier EL84 - RARE - 2x12W - High Quality - RARE - For Connoisseurs Only !  - Please find all the information below. Thanks to read ALL the description -  +++ Introduction +++ Sorry in advance, for any mistakes, I am using internet, to make translation.  I am living in France and Cambodia, that is why I use my french count linked with my paypal and bank account in France, while my audio gear is in Cambodia, closer to Japan from where it comes, and where I spend the most of the year.  That is why you will see some not correct item location on the console, as I am obliged to use my french account, thanks for your understanding. I indicates you worldwide shipping fees through DHL postal services (insured online track-able) The item will be shipped from Cambodia (check tax and customs if needed) For more accurate shipping rate send me your location, this is a no claim no return sale, Thanks.  Many Thanks for your visit, wish you a good day, and don't forget to have a look at my other sales. Any question Please ask.   +++ Item Description +++ TRN Japan is the official seller for eastern electric, they setup together with Hong Kong Hit Audio and Mr Master Alex Yeung, this rare quality product. Only available in Japan it has been highly rated at HiFi Shows, its release price was close to 1,500 US$ It deliver a 2 x 12W, has 3 lines input, headphone plug, and really enough power for everyday life use, Sound quality is about excellent balance, whether low middle or high frequencies, the residual noise is very small. Very neutral sound that provides you the ability to listen easily to small room orchestral music, orchestra, jazz, vocal pops, and a wide range of any styles The interior of the amplifier is realized within high quality, and a very rare combination of a rectifier tube 5AR4 in addition to a bridge diode has been setup ! It has class A filters and luxurious transformers & chokes, high quality coupling capacitor, high end wiring This humble high quality integrated tube amplifier equipped with valves El84  famous Brand Electro-Harmonix   Please Note That: As with used gear, performance and working condition  may be altered at anytime, this is a no claim no return sale Thank You    Specifications Power output: 12W RMS (8 ohm) / CH Input Impedance: 100Kohm Output Impedance: 4, 8 ohm Signal to Noise: 86dB Dimension(WxLxH): 360(W) x 260(L) x 170(H) mm Net Weight: 11 kg Original Japan setup: 100V    +++ About the Seller +++ Most of the goods that I sell were bought during some regular trips in Japan & through Japanese friends. I am French, music lover, and I am living between France and Cambodia (where most of my Audio is settle), I spend most of my free time having good time with my family & enjoying vintage sound systems.   I am not a professional seller (I have enough work with my current job), but only an Audio passionate. Therefore I regularly have a little bit more equipment that I need... I like to buy and discover new items, try them in my sound systems, enjoy them, then, mainly due to space, and financial limitation, it is time to sell some of them, for someone else, somewhere, can have some good time with it.   +++ About the Payment +++ I only accept PayPal payments. (if you don't have an account, please go on paypal website, very easy and safe way to make payments)   +++ About the Sale +++ As I mainly sell vintage items, and so most of the goods are used, and some are quite old, Thanks to look carefully the item pictures and read the full description. Please understand that there will be, no claims and no returns possible. For the stressful persons or the ones who wish perfect goods, please refrain from buying. Be inform that these a

Shipping from my place has just been temporary suspended, -  you can still buy an item you like, the shipping will only be postponed -  or you could book an item for a 30% non refundable deposit, deductible from the full payment for sure - Any question to help you to finalize your choice, please ask. Thank you Japanese TRN Super 12 - Integrated Tube Amplifier EL84 - RARE - 2x12W - High Quality - RARE - For Connoisseurs Only !  - Please find all the information below. Thanks to read ALL the description -  +++ Introduction +++ Sorry in advance, for any mistakes, I am using internet, to make translation.  I am living in France and Cambodia, that is why I use my french count linked with my paypal and bank account in France, while my audio gear is in Cambodia, closer to Japan from where it comes, and where I spend the most of the year.  That is why you will see some not correct item location on the console, as I am obliged to use my french account, thanks for your understanding. I indicates you worldwide shipping fees through DHL postal services (insured online track-able) The item will be shipped from Cambodia (check tax and customs if needed) For more accurate shipping rate send me your location, this is a no claim no return sale, Thanks.  Many Thanks for your visit, wish you a good day, and don't forget to have a look at my other sales. Any question Please ask.   +++ Item Description +++ TRN Japan is the official seller for eastern electric, they setup together with Hong Kong Hit Audio and Mr Master Alex Yeung, this rare quality product. Only available in Japan it has been highly rated at HiFi Shows, its release price was close to 1,500 US$ It deliver a 2 x 12W, has 3 lines input, headphone plug, and really enough power for everyday life use, Sound quality is about excellent balance, whether low middle or high frequencies, the residual noise is very small. Very neutral sound that provides you the ability to listen easily to small room orchestral music, orchestra, jazz, vocal pops, and a wide range of any styles The interior of the amplifier is realized within high quality, and a very rare combination of a rectifier tube 5AR4 in addition to a bridge diode has been setup ! It has class A filters and luxurious transformers & chokes, high quality coupling capacitor, high end wiring This humble high quality integrated tube amplifier equipped with valves El84  famous Brand Electro-Harmonix   Please Note That: As with used gear, performance and working condition  may be altered at anytime, this is a no claim no return sale Thank You    Specifications Power output: 12W RMS (8 ohm) / CH Input Impedance: 100Kohm Output Impedance: 4, 8 ohm Signal to Noise: 86dB Dimension(WxLxH): 360(W) x 260(L) x 170(H) mm Net Weight: 11 kg Original Japan setup: 100V    +++ About the Seller +++ Most of the goods that I sell were bought during some regular trips in Japan & through Japanese friends. I am French, music lover, and I am living between France and Cambodia (where most of my Audio is settle), I spend most of my free time having good time with my family & enjoying vintage sound systems.   I am not a professional seller (I have enough work with my current job), but only an Audio passionate. Therefore I regularly have a little bit more equipment that I need... I like to buy and discover new items, try them in my sound systems, enjoy them, then, mainly due to space, and financial limitation, it is time to sell some of them, for someone else, somewhere, can have some good time with it.   +++ About the Payment +++ I only accept PayPal payments. (if you don't have an account, please go on paypal website, very easy and safe way to make payments)   +++ About the Sale +++ As I mainly sell vintage items, and so most of the goods are used, and some are quite old, Thanks to look care