Class ii power

Objectif Panasonic Lumix G vario 100-300 F4,0-5,6 II Power OIS. État: "Occasion" Service de livraison: Colissimo

CELLO DUET 350 Stereo Power Amplifier by Mark Levinson Serial number 00006 This amplifier comes from the auction of the equipment of a French audiophile. It is in working condition and appears to be in its original condition. It was used with a YBA preamp and Martin Logan CLS II speakers. I did not have the amplifier serviced. Of course for optimal use, it will probably be necessary to plan to change the capacitors and do a general overhaul. It is sold as is. The amplifier is in good cosmetic condition. There are slight marks on the handles (see photos) It is sold without cables Comes with a copy of the owner's manual Shipping is given as an indication, please ask for a shipping quote Product Specifications: Class of operation: Class AB2 Power Output (single amp): @8 Ohms Rated: 350 Watts @4 Ohms Rated: 600 Watts Power Output (bridged amps): @8 Ohms Rated: 1,200 Watts IMD (SMPTE): 0.3% (60 Hz / 8 Ohms / 52.92 V Output) IMD (CCIF): THD (20 - 20000Hz): Frequency Response: +0/-0.8 dB @ 10 - 20000 Hz Dynamic Headroom: 1.8 dB Channel Separation: 90 dB Signal to Noise: Input Sensitivity: 1.491 V (8 Ohms / 350 Watts / 52.92 Volt Output) Input Impedance: 1 mOhm (Non-Inverting) 5000 Ohm (Inverting) 1 mOhm (Unbalanced) Gain: 31 dB (Unbalanced) 37 dB (Balanced) Dimensions: 19"w / 12.62"h / 23.25"d Shipping Weight: 100 lbs. N'hésitez pas à me contacter si vous souhaitez des photos ou informations supplémentaires Arrivages réguliers, visitez notre boutique et ajoutez nous a vos vendeurs favoris

Paire pentodes 807 de puissance à faisceau dirigé Hytron - NOS ref militaire VT-100 (Usage militaire Tube de sortie puissance d'antenne émetteur ex: JUpiter ER504) Usage en triode possible en couplant Anode et grille 2 Pentode de puissance de sortie  refroidissement à air Ce tube a été construit dans les années 50, il est de qualité militaire US Ce tube a été testé 100% OK comme NOS sur Funke W19 fiche N° 818   Caractéristiques: - Chauffage indirecte 6.3 volts 0,9 Ampère - Culot UX 5 - Va 600 volts maxi à 15 MHz - puissance utile: 30 à 40 Watt sous 60 MHz et 145 à 20 W à 125 MHz. - Sans refroidissement air forcé la dissipation anodique est de 25 watts (usage HIFI) - Débit plaque maxi 75 mA en class B Usage typique class AB1 power amplifier en mode triode: Tension anodique 400 volts Grille 2  400 volts couplée à anode Grille 1 de commande borne de tension: - Polarisation - 45 volts - Tension BF crête G1 90 volts  - courant anode au repos 60 mA et 140 mA au maxi excitation BF. Puissance de sortie 15 watts Résistance anodique 3000 ohms Le tube proposé sera livrés dans sa cartonnerie d'emballage militaire collectif Groupez vos achats dans notre boutique cotatel1 pour réduire les frais de port par objet Bonnes emplettes One pair 807 beam power pentode Hytron (NOS) Military VT-100 Ref (Military Use Jupiter ER504 Transmitter Antenna Output power tube) Triode use possible by coupling Anode and grid 2 Pentode power output air cooling This tube was built in the 50s, it is US military grade This tube has been tested 100% OK as NOS on Funke W19 sheet N ° 818 Characteristics: - indirect heating 6.3 volts 0.9 amps - UX5 Base - Va 600 volts Max 15 MHz - useful power: 30 to 40 Watt at 60 MHz and 145 at 20 W at 125 MHz. - Without forced air cooling the anodic dissipation is 25 watts (use HIFI) - Max flow rate 75 mA in class B Typical use class AB1 power amplifier: - anode and G2 voltage 400 volts - grid G1 control voltage terminal: - Polarization - 45 volts - BF G1 peak voltage 90 volts - anode current at rest 60 mA and 140 mA at maximum excitation LF. - Power output 15 watts - Resistance anodic 3000 ohms The proposed tube will be delivered in its collective military packing box Group your purchases in our shop ! Happy shopping

Paire pentodes 807 de puissance à faisceau dirigé Hytron - NOS ref militaire VT-100 (Usage militaire Tube de sortie puissance d'antenne émetteur ex: JUpiter ER504) Usage en triode possible en couplant Anode et grille 2 Pentode de puissance de sortie  refroidissement à air Ce tube a été construit dans les années 50, il est de qualité militaire US Ce tube a été testé 100% OK comme NOS sur Funke W19 fiche N° 818   Caractéristiques: - Chauffage indirecte 6.3 volts 0,9 Ampère - Culot UX 5 - Va 600 volts maxi à 15 MHz - puissance utile: 30 à 40 Watt sous 60 MHz et 145 à 20 W à 125 MHz. - Sans refroidissement air forcé la dissipation anodique est de 25 watts (usage HIFI) - Débit plaque maxi 75 mA en class B Usage typique class AB1 power amplifier en mode triode: Tension anodique 400 volts Grille 2  400 volts couplée à anode Grille 1 de commande borne de tension: - Polarisation - 45 volts - Tension BF crête G1 90 volts  - courant anode au repos 60 mA et 140 mA au maxi excitation BF. Puissance de sortie 15 watts Résistance anodique 3000 ohms Le tube proposé sera livrés dans sa cartonnerie d'emballage militaire collectif One pair 807 beam power pentode Hytron (NOS) Military VT-100 Ref (Military Use Jupiter ER504 Transmitter Antenna Output power tube) Triode use possible by coupling Anode and grid 2 Pentode power output air cooling This tube was built in the 50s, it is US military grade This tube has been tested 100% OK as NOS on Funke W19 sheet N ° 818 Characteristics: - indirect heating 6.3 volts 0.9 amps - UX5 Base - Va 600 volts Max 15 MHz - useful power: 30 to 40 Watt at 60 MHz and 145 at 20 W at 125 MHz. - Without forced air cooling the anodic dissipation is 25 watts (use HIFI) - Max flow rate 75 mA in class B Typical use class AB1 power amplifier: - anode and G2 voltage 400 volts - grid G1 control voltage terminal: - Polarization - 45 volts - BF G1 peak voltage 90 volts - anode current at rest 60 mA and 140 mA at maximum excitation LF. - Power output 15 watts - Resistance anodic 3000 ohms

THRESHOLD SA/3     Verkaufe meinen THRESHOLD SA/3 LIMITED EDITION PURE A KLASSE Verstärker in perfektem Zustand. 53W per chanel Seltene Verstärker, beste serie von Threshold nach vielen Kritiks mit einem voragendem Klang in alle Musik style. Immer in einem non smoking Zimmer. Nur Abhohlung oder Sendung unter Vollverantwortung und kosten kann der Amplifier geschickt sein.       THRESHOLD SA3 LIMITED EDITION PURE CLASS A AMP WORKING PERFECT VERY GOOD CONDITION,   Threshold SA/3 Stasis Power amplifier Optical Bias Power Amp. 50 watts per channel -- Pure Class A. These amps do not come up for sale very often -- for good reason. Designed by Nelson Pass during Threshold's heyday and considered to have very smooth sound, good thermal stability and more detail than Threshold's earlier amps. Threshold referred to the sound of this SA series as "extraordinary musical accuracy". The SA/3 is a favorite of Threshold lovers for its warm sound, and this amp is built like a tank. Machined-aluminum faceplate and metal chassis. Gold-plated machined Teflon insulated input connectors, five-way binding posts with gold-plated contact surfaces, military grade glass epoxy circuit boards are all hand soldered, and assembly and final adjustment was completed under the supervision of Nelson Pass. It delivers 16 continuous amps and 80 peak amps per channel and will effortlessly drive most speakers. Threshold SA/3 50watt/channel Stasis Pure Class A Power Amplifier. This amplifier, designed by Nelson Pass and Built in the USA by Threshold employs pure Class A circuitry at every stage - there is no corrective feedback loop, and the resulting sound is absolutely unmatched. There is nothing on the market today that comes close. This amplifier will drive even the most difficult speakers (think Quads or other electrostatics), as well the simplest bookshelf system, to the very limits of their sonic capability. Circuit boards are military grade, glass epoxy, with gold over nickel over copper plated traces. All connections are hand soldered. This is a limited edition. Input connections are gold plated. This amp is absolutely Gem Mint inside and out and sounds magnificent. It weighs 56 pounds Um ohne Gefährt vorwärts zu fahren ist Mir lieber eine Abholung. Der Kunde eine Sendung möchte geht auf eigene Kosten und Risiko.   Preis:  2200€   Mein Handy: (33) 608980215

THRESHOLD SA/3     Verkaufe meinen THRESHOLD SA/3 LIMITED EDITION PURE A KLASSE Verstärker in perfektem Zustand. 53W per chanel Seltene Verstärker, beste serie von Threshold nach vielen Kritiks mit einem voragendem Klang in alle Musik style. Immer in einem non smoking Zimmer. Nur Abhohlung oder Sendung unter Vollverantwortung und kosten kann der Amplifier geschickt sein.       THRESHOLD SA3 LIMITED EDITION PURE CLASS A AMP WORKING PERFECT VERY GOOD CONDITION,   Threshold SA/3 Stasis Power amplifier Optical Bias Power Amp. 50 watts per channel -- Pure Class A. These amps do not come up for sale very often -- for good reason. Designed by Nelson Pass during Threshold's heyday and considered to have very smooth sound, good thermal stability and more detail than Threshold's earlier amps. Threshold referred to the sound of this SA series as "extraordinary musical accuracy". The SA/3 is a favorite of Threshold lovers for its warm sound, and this amp is built like a tank. Machined-aluminum faceplate and metal chassis. Gold-plated machined Teflon insulated input connectors, five-way binding posts with gold-plated contact surfaces, military grade glass epoxy circuit boards are all hand soldered, and assembly and final adjustment was completed under the supervision of Nelson Pass. It delivers 16 continuous amps and 80 peak amps per channel and will effortlessly drive most speakers. Threshold SA/3 50watt/channel Stasis Pure Class A Power Amplifier. This amplifier, designed by Nelson Pass and Built in the USA by Threshold employs pure Class A circuitry at every stage - there is no corrective feedback loop, and the resulting sound is absolutely unmatched. There is nothing on the market today that comes close. This amplifier will drive even the most difficult speakers (think Quads or other electrostatics), as well the simplest bookshelf system, to the very limits of their sonic capability. Circuit boards are military grade, glass epoxy, with gold over nickel over copper plated traces. All connections are hand soldered. This is a limited edition. Input connections are gold plated. This amp is absolutely Gem Mint inside and out and sounds magnificent. It weighs 56 pounds Um ohne Gefährt vorwärts zu fahren ist Mir lieber eine Abholung. Der Kunde eine Sendung möchte geht auf eigene Kosten und Risiko.   Preis:  2200€   Mein Handy: (33) 608980215 Ich kann wegen Corona bis Kehl fahren

Mc2 Mc750 Power Amplifier. In very good condition Fans have been upgraded with noctuas which are way more silent compared to the originals Description: MC750 digitally controlled power amplifier represents the latest technology in control circuitry coupled to a no compromise high quality class AB power amplifier. There is no dynamic switching of theaudio or power rails (a very common method of achieving extra power at the expense of audio quality) thus ensuring optimum sonic performance. The digital control monitors the operating parameters and adjusts the amplifier to suit the conditions. Fan speed and supply rails are varied as required to keep the amplifier within its temperature limits. The levels are adjusted by specially selected, high performance, digitally controlled attenuators. Signal limiters are included, the attack and release times of which can be adjusted internally by the bit switches on the control PCB (printed circuit board). The amplifiers include full DC and short circuit protection which automatically re-connects when the fault is cleared. Specifications: Power output: 625 watts per channel into 8Ω (stereo), 2150W into 8Ω (mono) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.03% Damping factor: 400 Gain: 31 dB Input sensitivity: 1.5V Signal to noise ratio: 106dB Speaker load impedance: 2Ω (minimum) Dimensions: 480 x 88 x 410mm Weight: 18.5kg

Bouton POWER Samsung BN41-00711A Modèle BORDEAUX II POWER Compatible par exemple avec LE40S67BD - LN-S2641D etc... ********************************** Occasion fonctionne parfaitement **********************************    Pour toute commande de plusieurs articles, les frais de port seront bien-sûr recalculés au plus juste. N'hésitez pas à me les demander (avant ou après vos enchères). Ne pas envoyer votre règlement avant que le port ne soit fixé. Merci d'avance.   Je mettrai votre évaluation dès réception de la mienne, comme cela je sais que vous avez bien reçu votre commande.         CONDITIONS DE VENTE: Ø Merci de lire entièrement les annonces avant d'enchérir, cela évitera des malentendus ou de mauvaises surprises (exemple: problème de tarifs des frais de port ==> voir plus bas). Ø Si vous avez la moindre question sur votre enchère, le moindre petit problème contactez-moi ! Il y a toujours une solution, je suis pour le dialogue. Là aussi cela évite les malentendus en fin de transaction. Ø A la réception de votre colis, vérifiez-en tout de suite l'état extérieur et en cas de doute demandez à l'ouvrir devant le facteur ou à la Poste si vous allez le chercher. En cas de recommandé, si vous ne faites pas de réserve par écrit au facteur, il n'y aura pas de remboursement possible après. Ø A la réception de votre objet, pensez à me laisser votre évaluation. Ayant trop souvent relancé les acheteurs pour avoir cette dernière, maintenant je laisse mon évaluation après la votre. Je vous remercie de votre compréhension et d’avoir pris connaissance de ces différentes indications. Consultez mes autres objets !

AMPLI  MARANTZ   PM 35 MK II Power output: 45 watts per channel into 8Ω (stereo) Fonctionne parfaitement voir photo pour le détail traces d'usages/ produit d'occasion pour toutes questions ou photos supplémentaires, n'hésitez pas à me contacter VERY NICE CONDITION FULLY WORKING fast delivery in perfect package PAYMENT MUST BE RECEIVED BY 5 DAYS OR NON-PAYMENT ITEM STRIKE WILL BE FILED! Please email me if you have any questions! ENVOI FRANCE: - mondial relay (envoi sous 24 /48 h  attention: pas d'envoi le lundi) - colissimo (envoi sous 24 h) ENVOI EUROPE: - colissimo international (envoi sous 24 h)

- -Capacities: 32GB -   - -Speed performance rating: Class 6 (based on SD 2.00 Specification) - -Supports SDHC compatible host devices -   - -Non-volatile solid-state; no moving parts maximizes battery power. Data is not lost when power is turned off -   - -Low battery consumption to maximize battery life in small portable devices -   - -User selectable mechanical write protect switch on the exterior card casing -   - -Operating shock rating of 2,000Gs, equivalent to a 10-foot drop to the floor -   - -Security level complies with both current and future Secure Digital Music Initiative (SDMI) portable device requirements  *32Go SD HC 32 Go Class 6 Secure Digital Memory Carte -Capacities: 32GB   -Speed performance rating: Class 6 (based on SD 2.00 Specification) -Supports SDHC compatible host devices   -Non-volatile solid-state; no moving parts maximizes battery power. Data is not lost when power is turned off   -Low battery consumption to maximize battery life in small portable devices   -User selectable mechanical write protect switch on the exterior card casing   -Operating shock rating of 2,000Gs, equivalent to a 10-foot drop to the floor   -Security level complies with both current and future Secure Digital Music Initiative (SDMI) portable device requirements    SDHC card is incompatible with legacy SD devices. Use SDHC card only with SDHC compatible devices.      Legacy SD cards can also be used with SDHC compatible devices. *Please make sure your devices can support SDHC 2.0, we do not responsible for any compatibility problem. Item SpecificsSpeicherkapazität 32 GBProduktgröße 32 x 24 x 2.1 mmProduktgewicht 2gHerstellergarantie 1 JahrProduktart SpeicherkarteClass Class 6Brand UnbrandedMPN Does not applyEAN Does not applyEAN Does not applyBrand UnbrandedMPN Does not applyFormat Does not applyCapacité de stockage Does not apply Payment 1.Quand le paiement des acheteurs est accompli, nous livrerons les marchandises dans un délai de 48 heures. 2.Le transport de fret demande normalement un délais de 6 à 15 jours 3.Nous acceptons seulement l'adresse de Paypal pour la livraison. Les acheteurs doivent s'assurer que l'adresse de Paypal correspond à celle de la réception avant paiement. Returns 1. L'acheteur doit nous informer dans un délai de 14 jours (A compter du jour de délivrance des marchandises). 2. Toutes les marchandises doivent être renvoyées dans leur emballage d'origine avec tous les accessoires au complet. 1. Please notify us within 14 days (according to the posting date). 2. Return items MUST have all ORIGINAL packaging and accessories. 3. Return postage and insurance charge is non-refundable for return items. Your Best Memory Card Store DESCRIPTION PAYMENT SHIPPING RETURN POLICY CONTACT US Hot Item New List Item Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us *32Go SD HC 32 Go Class 6 Secure Digital Memory Carte -Capacities: 32GB   -Speed performance rating: Class 6 (based on SD 2.00 Specification) -Supports SDHC compatible host devices   -Non-volatile solid-state; no moving parts maximizes battery power. Data is not lost when power is turned off   -Low battery consumption to maximize battery life in small portable devices   -User selectable mechanical write protect switch on the exterior card casing   -Operating shock rating of 2,000Gs, equivalent to a 10-foot drop to the floor   -Security level complies with both current and future Secure Digital Music Initiative (SDMI) portable device requirements    SDHC card is

Marantz PM4 An excellent amp in very good condition and full working order.  Performs according to specs. This has been tested on a Audio Precision tester (see images of THD + Freq. response). Built in the the 80s in class A mode it's truly amazing with Living Voice and similarly efficient speakers only 15 watts in class A so wont drive hard loads or inefficient speakers to ear splitting levels but can be put into class a b mode for 60 watts. This one has been recapped with Silmic 2 Caps and had new modern binding posts fitted by Deco Audio around 3 years ago. The volume control works 100% no crackles hisses etc but it does require to be handled with care as it was rebuilt again by Deco Audio rather than replacing it. Its a truly epic performer in Class A mode with real grunt allied to a well balanced and resolved sound that is not fatiguing. This amp will outperform many far more expensive amps. The Lavardin IT at 6k shown below it is what i had to spend to replace it it's that good. Obviously this auction is for the Marantz amp only Collection and demo welcomed in Ardeche France Worldwide shipping in very secure double boxed package. Good Luck Class: A-B Sine Power: Class A: 15 W + 15 W (8Ω), Class A-B: 60 W + 60 W (8Ω) THD: 0,015% (20Hz - 20kHz at the time of an 8Ω load intensity and an Output power) Cross modulation distortion (60Hz:7kHz=4:1): 0.015% (at the time of an 8Ω load intensity and an Output Inputs: 2 x phono, switchable phono 1: MM + MC, Phono 2: MM, 2 x tape Outputs: 2 x speaker, headphones Voltage: 110/120/220 V AC, 60/60 Hz Power consumption: 150 watts Dimensions (W x H x D): 416 x 117 x 334 mm Weight: 9.5 kg

8 legendary Class A mic preamps in the same class as the Focusrite ISA and RED ranges. They don't make them like this anymore... This unit is in very good condition - see pictures: front face is pristine with no scratches, only a few usage scratches around the rack ears from installation (marks will be hidden again after mounted onto a rack). It never left the studio. The Octopre provides eight pristine discrete channels of Focusrite Class A mic preamp and compression, OctoPre PLATINUM routes directly to any digital audio workstation via eight standard analogue outputs. Each channel features a revolutionary compressor/limiter circuit, providing a warm-sounding compressor, which morphs into a brick wall limiter to avoid those critical overs, ensuring total control over all eight channels. The mic preamps featured in OctoPre PLATINUM are similar to those featured in the award winning Focusrite Top-Of-The-Range. They are a transistor-based Class A design utilising the same full-bandwidth philosophy as the legendary RED and ISA mic preamps, ensuring detail and clarity without colouration. The first two 'super channels' also feature phase reverse, as well as TRS jack inputs on the front fascia for quick and easy, DI-free instrument plug-in. Eight line level balanced (+4 dBu) analogue inputs and outputs are provided as standard via 25-pin D-type connectors. These D-type connectors may be routed to 8 XLR/TRS by means of an (optional) 8-way 25-pin D-type to 8 XLR/TRS breakout cable, available separately. In addition to the analogue outputs, the OctoPre can be fitted with digital output (OPTIONAL CARD). Detailed description from the focusrite website: The OctoPre is an eight channel Class A microphone preamplifier, featuring a classic Focusrite mic pre and a revolutionary compressor/limiter circuit on each channel. The mic pres featured in the OctoPre are similar to those featured elsewhere in the award winning Focusrite Platinum range. They are a transistor-based Class A design utilising the same full bandwidth philosophy as the legendary Focusrite Red and ISA mic pres, ensuring detail and organic clarity without obvious colouration. The revolutionary compressor/limiter circuit provides each channel with warmsounding compression, which morphs into brick wall limiting to avoid critical ‘overs’ when recording digitally. The first two channels also feature phase reverse, as well as unbalanced 1/4” jack inputs on the front fascia for quick and easy, DI-free plug-in of guitars and basses. With Class A Focusrite analogue signal processing and comprehensive A/D interface options, OctoPre is the perfect partner for a Pro Tools™ system or any other digital audio workstation, making high quality, multi-channel recording easy. Equally, it could be utilised as part of a compact multi-channel location recording solution (with a laptop or ADAT™, for example), or as an additional set of professional-quality mic pres for any analogue or digital console or hard disk recorder. The original OctoPre is a typical Class A Platinum design, (based around a 737 Rhom transistor) and it is solid state, it has extended bandwidth (up to at least 180kHz at the top end) and sounds transparent. The original OctoPre has an edge in being more forgiving if you want to slam the pre's hard (but more 2nd order harmonic distortion as a result). -The Octopre has a dynamics (compressor/limiter) control on each channel -The Octopre has 48V phantom power switches on each channel -The Octopre has line in and out connections on 25 pin D-sub connectors and 8 XLR inputs for mics Performance specifications: THD:0.001% @ 20dBu input, mic and line at 0dB gain Noise:-96 dB at unity gain through the unit Mic EIN:-128 dBu @ 6dB of gain with 150Ω termination impedance Frequency response:-1 dB at 10 Hz to 200 kHz Carefully packed with powercord. Shipping France: 27,80 € Shipping Europe: 36,30 €

Un tube triple grille 89  de fabrication Française par NEOTRON dans les années 50 ! Tube testés 100% OK à l'analyseur avant expédition Caractéristiques: - Chauffage AC DC 6,3 volts 400 mA - Buld ST12 - Base Small 6 pins En class A1 amplifier cablé en triode - Anode voltage 160 ou 250 volts - Débit anode de 17 à 32 mA - Grille N°1 -20 ou -31 volts  (c'est le téton du haut) - Grille N°2 et N°3 reliées à l'anode - Coefficient d'amplification 4,7 - Transconductance de 1425 à 1800 micromhos - Résistance de charge de 7000 ohms à 5500 ohms - Sortie sans distorsion de 0,3 watt à 0,9 watt En audio class A1 en mode pentode puissance audio jusqu'à 3,4 watts En class B amplificateur câblé en triode - Anode voltage maxi 250 volts - Débit anode de 90 mA en crête Usage typique: - 180 volts sur l'anode - Polarisation 0 sur la grille N°1 et 2 couplée - Grille n°3 couplée à l'anode - 0 signal courant anodique 6 mA - Résistance de sortie 9400 ohms Livrée dans son rouleau de ré-emballage armée française d'origine Bonne découverte de cette rareté prête à une expérimentation en usage HIFI One tube triple grid 89  -French manufacturing by Neotron in the 50s Tube 100% tested OK before shipment to the analyzer Features: - Heating 6.3 volts AC DC 400 mA - Buld ST12 - Small base 6 pins In class A1 amplifier wired in triode - Anode voltage 160 or 250 volts - Anode flow rate from 17 to 32 mA - Grille # 1 -20 or -31 volts (the top nipple) - Grid # 2 and # 3 connected to the anode - Amplification factor 4.7 - Transconductance 1425-1800 micromhos - Load resistance of 7000 ohms to 5,500 ohms - Undistorted output of 0.3 watts to 0.9 watts Audio class A1 pentode Audio power mode to 3.4 watts In class B amplifier wired in triode - 250 volts maximum anode voltage - Anode output of 90 mA crest Typical usage: - 180 volts on the anode - 0 bias to the gate # 1 and 2 coupled - Grid # 3 coupled to the anode - 0 anodic current 6 mA signal - Output resistance 9400 ohms Good discovery of this rare and HIFI usage

Great Italian all tube guitar head, kept as a backup, hardly a few hours of play since new, non smoking home. With original box. Priced new in Europe at 439€ direct manufacturer price  baroni-lab.eu/shop/ampli/heads/lucas-bl05-class/ The amp lights up red when on. European power cable included. If you are in the UK I will include a UK mains cable instead. From the manufacturer: The ‘Lucas BL05’ is a class A, single channel, all tube amplifier. It utilizes 1 x 12AX7/ECC83 and 1 x 12AU7/ECC82 pre-amp tubes and one JJ el84 in the power amp. With a combination of pre-amp ‘volume gain’ and a ‘master volume’ control the ‘Lucas BL05’ can create great, rich natural overdrive at lower volumes or crisp, articulate cleans with good headroom and everything else in between. Take the ‘volume gain’ past 12 o’clock and the sweet sound of a naturally overdriven tube amp starts to kick in. Past this point the amp will break up more and more taking you from an edgy blues twang all the way through to an authentic classic rock crunch. Accompanied by a very responsive 3 band EQ, presence control and high/low gain inputs there are many tone shaping possibilities with this amp. Controls: Volume, Gain, Bass, Middle, Treble, Presence, Standby switch, Power switch, 8/4 ohm selector switch Power Output: 5W (RMS) into 8,4 Ohms Voltage: 110-120v/220-230v, 50/60Hz Size: 242*440*210 (mm) Packing Size: 337*535*305 (mm) Weight: 7.9 kg Gross Weight: 9.3 kg

Ampli Technics SU-V620 New Class A 2 X 70 Watts RMS Parfait état de fonctionnement Technics SU-V620 Amplifier New Class A 2 X 70 Watts RMS Perfect working condition Specifications Power output: 70 watts per channel into 8Ω (stereo) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.1% Damping factor: 100 Input sensitivity: 2.5mV (MM), 150mV (line) Signal to noise ratio: 76dB (MM), 92dB (line) Channel separation: 50dB (line) Output: 150mV (line) Speaker load impedance: 4Ω to 16Ω