Front kit

Kit d'évolution  i7 / 64 Bit  Ensemble parfait pour booster une machine, Gamer ou même bureautique. Puissance assurée pour: Derniers jeux vidéos / traitement vidéo / Audio, DAO, bureautique, internet, etc.. Lot GAMER i7 / 4K Ultra HD, testé et fonctionnel, composé de:   1 Processeur i7 4770K   - Mode turbo Boost 4 x 3.90 Ghz (Base 4 x 3.50 Ghz)  - 64 Bit / 4 Cores / 8 Threads / 8 MB Intel Smart cache  - Cœur graphique Intel intégré HD 4600 / Résolution maximal HDMI 4096 x 2304  - 3 écrans possibles  - Technologie Intel Turbo Boost intégré  - Technologie Intel Hyper threading intégré   1 Carte mère ASUS Z87-A  - Format ATX    - Compatible 4K Ultra HD (4096 x 2160)  - Socket / LGA 1150   - RAM supportée jusqu'à Max. 32 Go, (DDR3 3000 Mhz max)  - USB 3.0 Boost protocole UASP  - Processeur graphique intégré  - 3 Slots PCI Express 16 pour ajouts cartes graphiques  - DIGI + VRM  - HDMI  - Multi écrans   Nouvelle version du BIOS UEFI plus conviviale et plus intuitive Le mode exclusif EZ Mode simplifie les réglages ·         Technologie à double processeur intelligent 2 ·         Remote GO! pour créer votre centre multimédia ·         Fan Xpert 2 pour personnaliser les réglages des ventilateurs ·         USB 3.0 Boost pour des transferts plus rapide  Livraison soignée et rapide Caractéristiques carte mère ASUS Z87-A (Données site du fabricant)  ·         CPU Intel® Core™ i7/Core™ i5/Core™ i3/Pentium®/Celeron® Socket 1150 Support des processeurs Intel® gravés en 22 nm Support de la technologie Intel® Turbo Boost 2.0 * Le support de la technologie Intel® Turbo Boost 2.0 dépend du type de processeur utilisé.  ·         Chipset Intel® Z87  ·         Mémoire 4 x DIMM, Max. 32 Go, DDR3 3000(O.C.)/2933(O.C.)/2800(O.C.)/2666(O.C.)/2600(O.C.)/2500(O.C.)/2400(O.C.)/2200(O.C.)/2133(O.C.)/2000(O.C.)/1866(O.C.)/1800(O.C.)/1600/1333 MHz Non-ECC, Un-buffered Architecture mémoire Dual Channel Support de la technologie Intel® Extreme Memory Profile (XMP) * Le support Hyper DIMM dépend des caractéristiques physiques de chaque processeur. * Pour connaître la liste des revendeurs agréés, référez-vous à l'onglet "Mémoires et périphériques supportés" ou au manuel utilisateur.  ·         Carte graphique Processeur graphique intégré Support sortie Multi-VGA: HDMI/DVI-D/RGB/DisplayPort 1.2 - Support de la norme HDMI avec une résolution maximum de 4096 x 2160 @ 24 Hz / 2560 x 1600 @ 60 Hz - Support de la norme RGB avec une résolution maximum de 1920 x 1200 @ 60 Hz - Support de la norme DVI-D avec une résolution maximum de 1920 x 1200 @ 60 Hz - Support de DisplayPort avec une résolution maximum de 4096 x 2160 @ 24 Hz / 3840 x 2160 @ 60 Hz Mémoire vidéo partagée max.: 1024 Mo Support de 3 écrans branchés simultanément  ·         Support multi-GPU Support de la technologie NVIDIA® SLI™ Quad-GPU *2 Support de la technologie AMD® CrossFireX™ Quad-GPU  ·         Slots d´extension 2 x PCIe 3.0/2.0 x16 (x16 ou dual x8) 1 x PCIe 2.0 x16 (mode x2) 2 x PCIe 2.0 x1 2 x PCI  ·         Stockage Chipset Intel® Z87: 6 x port(s) SATA, [jaune] Support Raid 0, 1, 5, 10 Support des technologies Intel® Dynamic Storage Accelerator, Intel® Smart Response, Intel® Rapid Start et Intel® Smart Connect  ·         LAN Realtek® 8111GR, 1 x Contrôleur Gigabit LAN  ·         Audio CODEC Realtek® ALC892 8 canaux audio haute définition - Support des fonctions: Jack-detection, Multistreaming, Front Panel Jack-retasking Fonctionnalités audio: - Absolute Pitch 192kHz/ 24-bit True BD sans pertes de sons - sortie(s) S/PDIF optique(s) sur panneau E/S arrière - DTS Ultra PC II - DTS Connect - Support de la protection de contenu audio Blu-ray  ·         Ports USB Chipset Intel® Z87: 6 x port(s) USB 3.0/2.0 (4 sur panneau arrière, [bleu], 2 au milieu) Chipset Intel® Z87: 8 x por

Kit d'évolution  i7 / 64 Bit  Voir également mes autres annonces pour RAM, processeur i7, Carte mère, HDD Ensemble parfait pour booster une machine, Gamer ou même bureautique. Puissance assurée pour: Derniers jeux vidéos / traitement vidéo / Audio, DAO, bureautique, internet, etc.. Lot GAMER i7 / 4K Ultra HD, testé et fonctionnel, composé de:   1 Processeur i7 4770K   - Mode turbo Boost 4 x 3.90 Ghz (Base 4 x 3.50 Ghz)  - 64 Bit / 4 Cores / 8 Threads / 8 MB Intel Smart cache  - Cœur graphique Intel intégré HD 4600  -  Résolution maximal HDMI 4096 x 2304  - 3 écrans possibles  - Technologie Intel Turbo Boost intégré  - Technologie Intel Hyper threading intégré   1 Carte mère ASUS Z87-A  - Format ATX    - Compatible 4K Ultra HD (4096 x 2160)  - Socket / LGA 1150   - RAM supportée jusqu'à Max. 32 Go, (DDR3 3000 Mhz max)  - USB 3.0 Boost protocole UASP  - Processeur graphique intégré  - 3 Slots PCI Express 16 pour ajouts cartes graphiques  - DIGI + VRM  - HDMI  - Multi écrans  Voir également mes autres annonces pour RAM, processeur i7, Carte mère, HDD Nouvelle version du BIOS UEFI plus conviviale et plus intuitive Le mode exclusif EZ Mode simplifie les réglages ·         Technologie à double processeur intelligent 2 ·         Remote GO! pour créer votre centre multimédia ·         Fan Xpert 2 pour personnaliser les réglages des ventilateurs ·         USB 3.0 Boost pour des transferts plus rapide  Livraison soignée et rapide Caractéristiques carte mère ASUS Z87-A (Données site du fabricant)  ·         CPU Intel® Core™ i7/Core™ i5/Core™ i3/Pentium®/Celeron® Socket 1150 Support des processeurs Intel® gravés en 22 nm Support de la technologie Intel® Turbo Boost 2.0 * Le support de la technologie Intel® Turbo Boost 2.0 dépend du type de processeur utilisé.  ·         Chipset Intel® Z87  ·         Mémoire 4 x DIMM, Max. 32 Go, DDR3 3000(O.C.)/2933(O.C.)/2800(O.C.)/2666(O.C.)/2600(O.C.)/2500(O.C.)/2400(O.C.)/2200(O.C.)/2133(O.C.)/2000(O.C.)/1866(O.C.)/1800(O.C.)/1600/1333 MHz Non-ECC, Un-buffered Architecture mémoire Dual Channel Support de la technologie Intel® Extreme Memory Profile (XMP) * Le support Hyper DIMM dépend des caractéristiques physiques de chaque processeur. * Pour connaître la liste des revendeurs agréés, référez-vous à l'onglet "Mémoires et périphériques supportés" ou au manuel utilisateur.  ·         Carte graphique Processeur graphique intégré Support sortie Multi-VGA: HDMI/DVI-D/RGB/DisplayPort 1.2 - Support de la norme HDMI avec une résolution maximum de 4096 x 2160 @ 24 Hz / 2560 x 1600 @ 60 Hz - Support de la norme RGB avec une résolution maximum de 1920 x 1200 @ 60 Hz - Support de la norme DVI-D avec une résolution maximum de 1920 x 1200 @ 60 Hz - Support de DisplayPort avec une résolution maximum de 4096 x 2160 @ 24 Hz / 3840 x 2160 @ 60 Hz Mémoire vidéo partagée max.: 1024 Mo Support de 3 écrans branchés simultanément  ·         Support multi-GPU Support de la technologie NVIDIA® SLI™ Quad-GPU *2 Support de la technologie AMD® CrossFireX™ Quad-GPU  ·         Slots d´extension 2 x PCIe 3.0/2.0 x16 (x16 ou dual x8) 1 x PCIe 2.0 x16 (mode x2) 2 x PCIe 2.0 x1 2 x PCI  ·         Stockage Chipset Intel® Z87: 6 x port(s) SATA, [jaune] Support Raid 0, 1, 5, 10 Support des technologies Intel® Dynamic Storage Accelerator, Intel® Smart Response, Intel® Rapid Start et Intel® Smart Connect  ·         LAN Realtek® 8111GR, 1 x Contrôleur Gigabit LAN  ·         Audio CODEC Realtek® ALC892 8 canaux audio haute définition - Support des fonctions: Jack-detection, Multistreaming, Front Panel Jack-retasking Fonctionnalités audio: - Absolute Pitch 192kHz/ 24-bit True BD sans pertes de sons - sortie(s) S/PDIF optique(s) sur panneau E/S arrière - DTS Ultra PC II - DTS Connect - Support de la protection de con

Testée fonctionnelle. En excellent état. Le meilleur des deux mondes..avec à la fois 6x SATA (sympa pour un petit NAS) et de l'IDE. A la fois du PCIexpress et PCI classique. VGA/DVI et HDMI. Sortie audio fournie + optique. Livrée avec l'IOShiled et 4 câbles SATA Comprends donc: - La carte mère MicroATX GA-H55MA-S2H - Un processeur Intel Core I3-540 à 3,07Ghz avec le ventirad d'origine - Une barrette de 2Go de RAM DDR3 DIMM Kingston (encore un slot disponible) - IOSHIELD / Backplate + 4 Câbles SATA (possible d'en joindre plus, dans ce cas contactez moi avant) - Processeur 1. Support for an Intel® Core™ i7 series processor/Intel® Core™ i5 series processor/ Intel® Core™ i3 series processor in the LGA1156 package (Go to GIGABYTE's website for the latest CPU support list.) 2. L3 cache varies with CPU - Chipset 1. Intel® H55 Express Chipset - Mémoire 1. 2 x 1.5V DDR3 DIMM sockets supporting up to 8 GB of system memory (Note 1) 2. Dual channel memory architecture 3. Support for DDR3 2200+/1800/1600/1333/1066/800 MHz memory modules 4. Support for non-ECC memory modules 5. Support for Extreme Memory Profile (XMP) memory modules * To reach DDR3 2200 MHz and above, you are required to use with Intel Core i7/Core i5 CPU without HD Graphics and install a discrete graphics card. When using Intel Core i5/Core i3/ Pentium CPU with HD Graphics, the maximum memory speed supported is 1666 MHz * Go to GIGABYTE's website for the latest memory support list. - Carte Graphique Intégrée Integrated in the Chipset: 1. 1 x D-Sub port (Note 2) 2. 1 x DVI-D port (Note 2) (Note 3) (Note 4) 3. 1 x HDMI port(Note 2) (Note 4) - Audio 1. Realtek ALC888B codec 2. High Definition Audio 3. 2/4/5.1/7.1-channel 4. Support for S/PDIF In/Out 5. Support for CD In - Réseau 1. 1 x RTL8111D chip (10/100/1000 Mbit) - Port d'expansion 1. 1 x PCI Express x16 slot, running at x16 (PCIEX16) (Note 5) (The PCIEX16 slot conforms to PCI Express 2.0 standard.) 2. 1 x PCI Express x16 slot, running at x4 (PCIEX4) (Note 6) 3. 2 x PCI slots - Technologie Multi-cartes graphiques 1. Support for ATI CrossFireX™ technology(Note 6) - Interface de Stockage Chipset: 1. 6 x SATA 3Gb/s connectors supporting up to 6 SATA 3Gb/s devices JMicron JMB368 chip: 1. 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices iTE IT8720 chip: 1. 1 x floppy disk drive connector supporting up to 1 floppy disk drive - USB Chipset: 1. Integrated in the Chipset 2. Up to 12 USB 2.0/1.1 ports (8 on the back panel, 4 via the USB brackets connected to the internal USB headers) - Connecteurs d'entrées/sorties internes 1. 1 x 24-pin ATX main power connector Connectors 2. 1 x 4-pin ATX 12V power connector 3. 1 x floppy disk drive connector 4. 1 x IDE connector 5. 6 x SATA 3Gb/s connectors 6. 1 x CPU fan header 7. 1 x system fan header 8. 1 x front panel header 9. 1 x front panel audio header 10. 1 x CD In connector 11. 1 x S/PDIF In header 12. 1 x S/PDIF Out header 13. 2 x USB 2.0/1.1 headers 14. 1 x serial port header 15. 1 x clearing CMOS jumper - Connecteur du Panneau Arrière 1. 1 x PS/2 keyboard or PS/2 mouse port 2. 1 x D-Sub port (Note 2) 3. 1 x DVI-D port (Note 2) (Note 3) (Note 4) 4. 1 x HDMI port (Note 2) (Note 4) 5. 1 x optical S/PDIF Out connector 6. 8 x USB 2.0/1.1 ports 7. 1 x RJ-45 port 8. 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/ Side Speaker Out/Line In/Line Out/Microphone) - Contrôleur d'Entrée/Sortie 1. iTE IT8720 chip - Monitorage Matériel 1. Sys

https://ark.intel.com/fr/products/50242/Intel-Desktop-Board-DX58SO2 Kit complet,comprenant un processeur 6 cores/8 threads avec ventilateur Enermax neuf,une carte mère Intel Dx58so2 avec backplate,et 24Go DDR3 1600Mhz triple channel (6x4Go) Samsung. Pâte thermique CPU neuve. L'ensemble est en parfait état de fonctionnement (le processeur n'a au passage jamais été overclocké),et est dans un état neuf. Carte mère avec ports USB3.0 et connecteurs SATA 6Gb/s avec RAID,etc. Je fournis également une carte USB 3.0 PCIExpress pour profiter des ports USB 3.0 en façade d'un boitier,une clé bluetooth et une clé Wifi Dualband. Pas de retour au regard du bon fonctionnement général. Envoi rapide et soigné. CPU (with new Enermax cooler),motherboard Intel Extreme Dx58so2 (with backplate) and RAM (3x4Gb 1600Mhz triple channel Samsung) like new,never overclocked,new CPU thermal paste applied. 1 USB3.0 PCIe card (to connect USB3.0 front panel ports),1 bluetooth 4.0 dongle and 1 Wifi Dualband dongle are included. No return. Fast and safe shipping.

http://www.sapphiretech.com/productdetial.asp?os=&Pid=F36478F0-CAD3-4031-8C74-251A506C02FD&tag=download&lang=eng Kit complet,comprenant un processeur 6 cores/8 threads avec ventilateur Arctic Freezer Pro,une carte mère Sapphire x58 Pureblack avec backplate,et 24Go DDR3 1600Mhz triple channel (6x4Go) Samsung. Pâte thermique CPU neuve. L'ensemble est en parfait état de fonctionnement (le processeur n'a au passage jamais été overclocké),et est dans un état neuf. Carte mère avec ports USB3.0 et connecteurs SATA 6Gb/s avec RAID,bluetooth intégré,etc. Je fournis également une carte USB 3.0 PCIExpress pour profiter des ports USB 3.0 en façade d'un boitier,et une clé Wifi Dualband. Pas de retour au regard du bon fonctionnement général. Envoi rapide et soigné. CPU (with Artic Freezer Pro cooler),motherboard Sapphire x58 Pureblack (with backplate,bluetooth integrated) and RAM (6x4Gb 1600Mhz triple channel Samsung) like new,never overclocked,new CPU thermal paste applied. 1 USB3.0 PCIe card (to connect USB3.0 front panel ports) and 1 Wifi Dualband dongle are included. No return. Fast and safe shipping.

Vds kit complet pour upgrade de PC (Processeur + carte-mère + RAM)   1) Processeur INTEL Core2 Quad Q9450 – 2.66 Mhz – Cache 12 Mo Créez en accéléré Exécution simultanéed’applications multimédias HD lourdes avec un gain de vitesse pouvant atteindre12 % pour la retouche et la publication de photos. Vous qui cherchez des performances monstres, n'allez pas plus loin. Avec sesquatre cœurs d'exécution, le processeur Intel® Core™2 Quad* se joue dutraitement intensif en environnements multitâches lourds et exploite au maximumles logiciels très multithread. Que vous soyez créateur multimédia, gamerpassionné ou que vous utilisiez plusieurs applications intensives, lequatre-cœurs va révolutionner votre approche de toutes vos activitésinformatiques. Soyez les pionniers du quadricœur et libérez la puissance dutraitement parallèle ! Le haut de gamme vient de monter d'uncran. Gravés en 45nm et dotés de circuits à base de hafnium, les nouveaux modèles de processeursIntel Core 2 Quad affichent des performances étonnantes et sont extrêmementéconomes en énergie. Encodage, rendu, retouche, montage ou lecture en transit,profitez au maximum des possibilités de vos logiciels multimédiasprofessionnels grâce à un PC équipé du processeur Intel® Core™2 Quad. Avec ses quatre cœurs detraitement, jusqu'à 12 Mo de mémoire cache niveau 2 au total et unbus principal cadencé jusqu'à 1333 MHz, c'est une véritablecentrale, non pas électrique ni atomique, mais informatique qui s'installe chezvous pour les loisirs et le multitâche. Intel®Advanced Digital Media Boost. Cette fonction accélère toute une série d'applications,dont le traitement de la vidéo, de la voix et des images, le chiffrement,l'analyse financière ainsi que les applications d’ingénierie et scientifiques.Sur les modèles 45 nm, lafonction Intel® HD Boost, qui intègre le nouveau jeud’instructions SSE4, améliore d’autant plus les performances pour le multimédiaet l’audiovisuel. Donnez à voslogiciels très multithread le parallélisme qu'elles réclament.Grâce au quatre-cœurs d'Intel, vous pouvez entrer de plain-pied dans l'universen rapide expansion des logiciels dits « multithread », c'est-à-direcomposés d'unités d'exécution (« threads ») qu'un processeur peuttraiter en parallèle (et non plus de manière sérielle). Avec ses quatre cœurs,le processeur Intel® Core™2 Quad excelle à ce parallélisme de traitement, auservice de vos divertissements ainsi que de vos activités multimédias et multitâches. 2) Carte mère AsRock G41-LE ·  CPU:          - LGA 775 - Supports Untied Overclocking Technology ·  Chipset:     -Intel® G41 ·  Memory      -Dual Channel DDR2, 2 x DIMM slots ·  Audio          -7.1 CH Premium Level HDAudio ·  LAN            -1 x Gigabit LAN10/100/1000 Mb/s ·  Slots            -1 x PCI Express x16 slot - 1 x PCIExpress x1 slot - 2 x PCI slots ·  Connector   - 4 x SATA2 3.0 Gb/s - 1 x ATA100 IDE (supports 2 x IDEdevices) - 1 x Floppy connector - 1 x Print port header - 1 x IR header - 1 x COM port header - CPU/Chassis FAN connector - 24 pin ATX power connector - 4 pin 12V power connector - Front panel audio connector - 2 x USB 2.0 headers (support 4 USB 2.0 ports) ·  Rear Panel I/O        - 1 x PS/2 Mouse Port - 1 x PS/2 Keyboard Port - 1 x VGA/D-Sub Port - 1 x VGA/DVI-D Port - 4 x Ready-to-Use USB 2.0 Ports - 1 x RJ-45 LAN Port with LED - HD AudioJacks ·  Form Factor           - Micro ATX Form Factor:9.6-in x 8.6-in, 24.4 cm x 21.8 cm     3) RAM 4 Go (2 x 2Go)Apacer PC2-6400 Avec radiateurs doré (voirphoto) Voir Google ou site Intel / Asrock pour caractéristiquestechniques

- Kit Intel® NUC DN2820FYKH () Systèmes d'exploitation pris en charge Windows 10, 64-bit*, Windows 8.1, 32-bit*, Windows 8.1, 64-bit*, Windows 8, 32-bit*, Windows 8, 64-bit*, Windows 7, 32-bit*, Windows 7, 64-bit* Numéro de la carte mère DN2820FYK Format UCFF (4" x 4") Conditionnement Soldered-down BGA Format du disque interne 2.5" Drive Nb. de disques internes pris en charge 1 Lithographie 22 nm PDT 7,5 W Tension d'entrée CC prise en charge 12 VDC Processeur inclus Intel® Celeron® Processor N2830 (1M Cache, up to 2,41 GHz) Admissibilité de la plate-forme Intel® vPro™ ‡ Non Nb. de cœurs 2 Nb. de threads 2 Fréquence de base 2,16 GHz Période de garantie 3 yrs Infos supplémentaires  Options embarquées disponibles Non Fiche technique Découvrez-la dès maintenant Fiche produit Découvrez-la dès maintenant Mémoire et stockage  Capacité mémoire maxi (dépend du type de mémoire) 8 GB Types de mémoire DDR3L-1066/1333 1.35V SO-DIMM Nb. max. de canaux mémoire 1 Bande passante mémoire maxi 10.7 GB/s Nb. max. de barrettes DIMM 1 Mémoire ECC prise en charge ‡ Non Processeur graphique  Graphiques de processeur ‡ Cœur graphique Intel® HD pour processeur Intel Atom® série Z3700 Graphiques intégrés ‡ Oui Sortie graphique HDMI 1,4a Nbre d'écrans pris en charge ‡ 1 Options d'extension  Révision PCI Express Gen2 Configurations PCI Express ‡ Half-length MiniPCI card with PCIe X1 lane Emplacement pour carte PCIe Mini Card (demi-longueur) 1 Configuration E/S  Nb. de ports USB 3 Configuration USB 1x front and 2x rear USB 2.0 Révision USB 2,0, 3.0 Configuration USB 2.0 (arrière + interne) 2 + 0 Configuration USB 3.0 (externe + interne) 1 + 0 Nb. total de ports SATA 1 Nb. max. de ports SATA à 6,0 Go/s 1 Configuration RAID N/A Audio (canal arrière + canal avant) 7.1 digital + analog stereo headset Contrôleur LAN intégré Realtek 8111GN-CG Connectivité sans fil intégrée‡ Intel® Wireless-N 7260 + Bluetooth 4,0 Bluetooth intégré Oui Capteur infrarouge de réception Oui Technologies avancées  Admissibilité de la plate-forme Intel® vPro™ ‡ Non Contrôleur son haute définition Intel® Oui Technologie de virtualisation Intel® (VT-x) ‡ Oui

  Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable     Le 13-juil.-19 à 14:54:17 Paris, le vendeur a ajouté les informations suivantes:

- CPU Intel® Socket 1156 Core™ i7 Processor/Core™ i5 Processor/Core™ i3 Processor/ Pentium® Processors Support Intel Next Generation 32nm Multi-Core CPU - Chipset Intel® H55 - Memory 2 x DIMM, Max. 8 GB, DDR3 1333/1066 Non-ECC,Un-buffered Memory Dual Channel memory architecture * When installing total memory of 4GB capacity or more, Windows® 32-bit operation system may only recognize less than 3GB. Hence, a total installed memory of less than 3GB is recommended. - Expansion Slots 1 x PCIe 2.0 x16 1 x PCIe 2.0 x4 2 x PCI - VGA Multi-VGA Output Support: HDMI, DVI-D and RGB Ports Supports Microsoft® DirectX 10 D-SUB with Max. Resolution: 2048 X 1536 @75Hz DVI with Max. Resolution: 1920 X 1200 @60Hz HDMI with Max. Resolution: 1920 X 1200 @60Hz - Storage Intel® H55 Express Chipset built-in 1 xUltraDMA 100/66 6 xSATA 3.0 Gb/s ports 1 x Floppy Connector - LAN Realtek 8112L Gigabit LAN PCIe Controller - Audio VIA VT1708S 8-Channel High Definition Audio Codec - Support Multi-Streaming - USB 12 USB 2.0/1.1 ports (6 Ports at Mid-Board, 6 Ports at Back Panel) - ASUS Unique Features ASUS CrashFree BIOS 3 Anti-Surge ASUS EZ Flash 2 ASUS Q-Fan2 ASUS AI NET 2 ASUS MyLogo 2 - Back Panel I/O Ports 1 x DVI 1 x D-Sub 1 x PS/2 Keyboard 1 x HDMI 1 x PS/2 Mouse 1 x LAN(RJ45) port 6 x USB 2.0/1.1 1 x COM port 3 x Audio Jacks - Internal I/O Connectors 3 x USB Connectors Support Additional 6 USB Ports 6 x SATA Connectors 1 x 24-Pin ATX Power Connector 1 x 4-Pin ATX 12V Power Connector 1 x CPU Fan Connector 1 x Chassis Fan Connector 1 x Front Panel Audio Connector 1 x System Panel Connector 1 x S/PDIF Out Header 1 x COM Connector 1 x Chassis Intrusion Connector (Optional) 1 x IDE Connector 1 x TPM Header (Optional) 1 x LPT Header - BIOS 64 Mb Flash ROM, AMI BIOS, PnP, DMI v2.0, WfM2.0, SMBIOS v2.5, ACPI v2.0a - Manageability WOL, PXE, PME Wake Up, WOR by Ring

Motherboard descriptionMotherboard manufacturer's name: ECS RC410-M Rev 1.1CPU/ProcessorSocket: 775 Supports the following processors: Pentium D 900 series Dual Core (Presler) Pentium D 800 series Dual Core (Smithfield) Pentium 4 500 (Prescott) Pentium 4 600 (Prescott) Celeron D (Prescott) Celeron D (Cedar Mill)Front-side bus (FSB)800/533 MHzChipsetNorthbridge: ATI RC410 Southbridge: ATI IXP450BIOS featuresAMI BIOSForm factorMicro ATX size form factor, 9.6 in x 9.6 inMemorySingle-channel memory architecture 2 x 240-pin DIMM sockets support unbuffered non-ECC 400 or 533 MHz Only! Maximum eMachines approved memory is 2 GBExpansion slotsThree PCI One PCI ExpressVideo graphicsIntegrated Supports PCI Express x16 graphics cardsOnboard audio or audio cardBuilt-in Azalia 8 channel audio Realtek ALC882 or ALC883 8-channel High Definition Audio CODECOnboard LANRealtek RTL8100 10/100 Mbps Fast Ethernet controllerBack panel I/OPS/2 keyboard (purple) PS/2 mouse (green) One SPDIF out port One S-video out port One VGA out port One Parallel port Four USB (2.0) One RJ-45 networking port (LAN) Audio ports: line in (light blue) line out (lime) microphone (pink) side speaker out (gray) rear speaker out (black) center/subwoofer (yellow orange)Internal connectorsTwo IDE connectors One floppy drive connector One ATX 24-pin power connector One ATX 4-pin +12v power connector Four Serial ATA connectors One VGA connector One CPU fan connector One PC fan connector One CD_IN connector One front panel audio connector One PC panel connector Two USB connectors supporting 2.0 ports

Kit compact pour NAS 4 baies. Montage simple et rapide: fixer les disques durs sur les 2 côtés, brancher les ventilateurs et les disques à la carte mère (câbles et vis fournis) et emboîter dessus, dessous, devant et fond sur les côtés. Alimentation (12V 8A) avec câble secteur EU, câble Ethernet fournis. Carte microSD 32 Go fournie pour installation système (ARMv7 32-bit Debian/openmediavault). Capacité max 4 x 16To, volume / filesystem 16 To max chacun.  Disques durs non fourni Documentation, manuel d'installation et caractéristiques à lire ici: https://wiki.kobol.io/helios4/intro/  _______________ Compact kit for 4-bay NAS. Quick and easy assembly: fix the hard disks on both sides, connect the fans and disks to the motherboard (cables and screws supplied) and fit top, bottom, front and bottom on the sides. Power supply (12V 8A) with EU mains cable, Ethernet cable supplied. 32 GB microSD card supplied for system installation (ARMv7 32-bit Debian/openmediavault). Max capacity 4 x 16TB, volume / filesystem 16TB max each. HDDs not provided Documentation, installation manual and specifications to read here: https://wiki.kobol.io/helios4/intro/

Welcome to xglk_43 This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. PAYMENT SHIPPING Terms of Sale ABOUT US Le 15-nov.-18 à 19:16:31 Paris, le vendeur a ajouté les informations suivantes:

Welcome to xglk_43 This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. PAYMENT SHIPPING Terms of Sale ABOUT US Le 01-déc.-18 à 15:12:05 Paris, le vendeur a ajouté les informations suivantes:

This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.   This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. Le 15-mai-19 à 07:47:26 Paris, le vendeur a ajouté les informations suivantes:

This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.   This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. Le 04-déc.-19 à 13:40:15 Paris, le vendeur a ajouté les informations suivantes:

Cisco C49xxE front and rear mount brackets - Kit de montage pour rack - pour Catalyst 4948E, 4948E-F pas cher Vendeur professionnel - produit neuf et en stock - facture fournie garantie 2 ans - Livraison avec suivi sous 5 à 10 jours

Clavier Périphériques Code EAN: 9351182001981 Rubrique principale Périphériques: Clavier En-tête / Fabricant: Singularity Périphérique d'alimentation / Type: Alimentation Titre: Singularity Computers Spectre 2.0 Elite Kit Front Distro Plate - Schw Périphérique(s) d'entrée / Technologie de connectivité: Filaire Divers / Type de produit: Accélérateur de processeur Périphérique(s) d'entrée / Type: Accélérateur

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable   Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 02-avr.-19 à 09:52:29 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable   Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 05-sept.-19 à 22:14:30 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable   Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 04-sept.-19 à 18:24:09 Paris, le vendeur a ajouté les informations suivantes:

490mm LED Backlight Strip Kit Update 22 Inch CCFL LCD Screen To LED Monitor ZH This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. Le 06-févr.-20 à 21:47:10 Paris, le vendeur a ajouté les informations suivantes:

490Mm Mise À Jour Du Kit De Bandes De Rétroéclairage Led, Écran Lcd Ccfl De Y5C5 Cette bande de rétroéclairage est parfaitement connue pour l'écran, la luminosité élevée, la protection de l'environnement et les économies d'énergie Particules de LED étroitement, disposition à haute densité, bandes de LED à souligner Longue durée de vie, avec une durée de vie de 100 000 heures Facile à installer utiliser un adhésif double face peut être attaché à la rainure LCD originale d'affichage, ou ailleurs Installation: Si votre moniteur utilise un onduleur, ce kit remplace l'inverseur pour le brancher sur la carte de contrrle Si votre moniteur est une carte d'alimentation intégrée haute tension, alors: la carte est sous tension, recherchez 12V (capacité), puis débranchez l'alimentation, utilisez un multimètre pour rechercher et 12V (capacité) Déconnectez la connexion originale du terminal négatif, la carte reeoit trois lignes: 12V, ON, GND, le 12v de l'onduleur connecté avec une électrode positive 12v de la carte d'alimentation intégrée, GND est connecté à l'électrode négative, ON connecté à ON / OFF En termes simples, l'alimentation haute tension originale l'alimentation est déconnectée, à la place de l'onduleur, Sur le front haute pression d'origine pour prendre le pouvoir VIN: tension ENA: marche / arrêt DIM: ADJ régler la luminosité GND: connexion à la terre Emballage: 2 x barrettes à DEL 1 x carte de pilotage 1 x cable Le 07-mai-21 à 15:30:14 Paris, le vendeur a ajouté les informations suivantes:

This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.   Le 02-nov.-18 à 18:56:23 Paris, le vendeur a ajouté les informations suivantes:

This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.   Le 19-déc.-18 à 12:41:21 Paris, le vendeur a ajouté les informations suivantes:

This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.   Le 31-déc.-18 à 10:53:05 Paris, le vendeur a ajouté les informations suivantes:

  This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.     Le 28-mars-19 à 11:16:27 Paris, le vendeur a ajouté les informations suivantes:

This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. Le 02-avr.-19 à 11:54:13 Paris, le vendeur a ajouté les informations suivantes:

This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.   Le 01-avr.-19 à 12:42:23 Paris, le vendeur a ajouté les informations suivantes:

This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. Le 13-mai-19 à 09:37:06 Paris, le vendeur a ajouté les informations suivantes:

This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. Le 05-mai-19 à 12:34:14 Paris, le vendeur a ajouté les informations suivantes: