Hf all

Yaesu Ft 102. Hf All Mode Transcever. État : Occasion. Cadrans de droite s allume pas. Autrement il fonctionne très bien.

Working 100%, Tx Rx All bands 100w, Perfect conditions. No Filters. Frequency range: 10-160 m + WARC / 50-54 MHz Mode: AM/FM/SSB/CW/RTTY/Packet RF Power output: Max 100 W

HF all bands with all Xtals, Filter CW inclued, Power Cord, beautifull and working perfect !!

Receiver HF,  all bands (0-30Mhz), AM/SSB/CW,Look very nice + HP Allied, Working perfectly. mint conditions.

Sigma EUROCOM Se HF X-80 & HF-360 Plus Kit antenne Product Details Marque: SIGMA EUROCOM Moyenne des commentaires client: Soyez la première personne à écrire un commentaire sur cet article Numéro du modèle de l'article: SE HF X-80 & HF-360 PLUS KIT Nous sommes les fabricants d'origine de Stinger et fabriquons cette antenne à Birmingham depuis de nombreuses années. Idéal pour les camionneurs, les agriculteurs et pour la conduite tout-terrain. Veuillez noter que le coût du carrosse est basé sur la partie continentale du Royaume-Uni uniquement. Par ailleurs, certains écossais Highland les codes postaux sont également exclus. Veuillez nous contacter par e-mail pour les frais de livraison à l'Irlande du Nord, les îles Anglo-Normandes, îles écossais et les Highlands d'Écosse avant d'acheter. Les clients d'îles du monde entier (par exemple : Caraïbes, balaerics, Canaries, pays non classé comme American continentale, extrêmement reculées etc.) Veuillez nous contacter pour les frais de livraison pour que vous puissiez obtenir une Valorisation précise SIGMA euro-comm se HF x-80 et se hf-360 plus Kit (kit uniquement, antenne non fournies) Le SIGMA Kit de mise à niveau est libéré pour étendre les options de votre antenne x80 et hf360. Le kit de mise à niveau améliore les bandes de 40 m et 80 m avec son faible angle de rayonnement, dans certaines circonstances et installations, il peut faire la différence entre un bruit blanc. 1, veuillez installer le support pour le kit de plus au fond des comme indiqué sur la deuxième photo 2, maintenant fixer le HF mobiles à l'équerre. Le HF mobiles peuvent être inclinés horizontalement ou à un angle plus verticale si l'espace est un problème. Veuillez vérifier que l'angle supports sont durcies avec la clé Allen fournie. 3, le 40 & 80 metre mobiles peut être réglé séparément en déplaçant le fouet en acier inoxydable vers le haut et vers le bas jusqu'à ce que les câbles en acier est atteint. « Attention Stock limité dans le temps à cause d’une forte demande chez mon fournisseur » Aucune garantie de stock supplémentaire Mes partenaires et moi-même s'engagent à livrer vos colis dans les meilleurs délais, de manière rapide, simple et efficace ! J’attire votre attention sur le texte ci-dessous : Certains produits ne sont pas livrable par La Poste:  la Corse, Outremer, Guadeloupe, Guyane française, La Réunion et les Iles Canaries en Espagne.  Merci de nous envoyer un message avant de commander afin que nous puissions vous confirmer la livraison ou pas !! La livraison est  gratuite  à toutes les adresses autres que des boîtes APO / PO dans la France et la Belgique. Mes stocks se trouvent en France. Toutes les commandes sont expédiées via DHL, La Poste, Chronopost ou UPS (selon l'emplacement et le poids du colis). Toutes les commandes seront expédiées dans les 48 heures suivant la date de votre paiement. A voir dans nos évaluations. FREE Shipping   to all addresses other than APO/PO boxes in the lower 48 states, France and Belgium. My stock is based in France. Shipped via USPS, DHL, La Poste, Chronopost or UPS (depending on package weight and location) PAIEMENT PAYPAL: Simple, garantie et rapide. PAYPAL vous protège. Si l'objet ne correspond pas à sa description ou que vous n'êtes pas livré, ils vous aideront à trouver une solution avec nous ou vous serez remboursé (voir leurs conditions). Nous avons une politique de retour sous 30 jours pour nos articles. Nos produits peuvent nous être retournés pour remboursement complet ou échange dans un délai de 30 jours. Les retours doivent impérativement nous revenir dans les 30 jours à compter de la date d'achat, uniquement avec l’étiquette envoyé par mes soins Nous déclinons toute responsabilité du produit après le délai des 30 jours de vos achats. Veuillez noter que nous ne remboursent plus les retours au-delà de la limite des 30 jours. Sachez que certains retours peuvent prendre jusqu'à 7 jours ouvrables pour être traiter. Nous faisons tout notre possible pour traiter les retours le plus rapidement. Les frais de retour sont à la charge de l'acheteur sauf si une erreur en commise de ma part. N’hésitez pas à me contacter pour toutes questions, je me ferais un plaisir a vous répondre au plus vite. SECURE PAYMENT WITH PAYPAL. We offer a 30-day return policy. Items can be returned for full refund or exchange within 30-days from the date you buy your product.  We are not responsible for any purchase after this 30-day period. All returns must be done within 30-days after the purchase date, otherwise the will be declined. Please note that it can take 7-days to trait a return.  You are responsible for the Return of the product unless I made a mistake. The return policy only works with a coupon sent by me.      If you have any questions please contact me, it will be a pleasure to respond asap to it. À l'attention aux ayants droit !! J’utilise la base de données centrale européenne (https://euipo.europa.eu) afin d'éviter la violation d'un droit de marque.  Si vous devez trouver l'utilisation non autorisée de votre marque dans cette annonce, veuillez nous contacter immédiatement par email. Nous retirerons alors toutes les annonces avec votre marque déposée dont l'utilisation non autorisée est signalée et nous veillerons à ce que cette utilisation non autorisée ne se répète pas. Nous ne pouvons être tenus responsables de toute violation d'un droit de marque à compter de la date à laquelle le propriétaire de la marque, nonobstant la découverte de l'utilisation de la marque par notre magasin, a laissé cette utilisation se poursuivre.  Une telle absence de réaction peut être considérée comme une autorisation implicite de la marque dans le cadre de cette annonce.    

 . Direct from an estate sale of a ham radio operator/collector - all of his vintage gear is in beautiful shape and a nice mix of equipment - including a MINT IN THE BOX Yaesu MD-1B8 Desk Microphone. Please view my other auctions. I will be listing radio gear weekly. This auction is for a beautiful, working YAESU FRG-7700 AM/SSB-CW SHORTWAVE HF RECEIVER. Absolutely PERFECT FRONT PANEL - all controls, lamps and fluorescent digital display operate as designed - all original control knobs with polished silver brights, all control lettering perfect. Steel cabinet looks great, has not dents or dings, only a few light, age-related scratches. Receiver is super clean inside and out. Tested, all bands engage, all modes engage (except FM) - tuning is smooth, selectivity and sensitivity is excellent - very loud audio with a nice, useful Tone control. This is a full sized "real radio" - no tiny confusing drop down sub menus menus - controls are solid and full size - has the feel of a classic communications receiver and is built to last. Comes with AC power cable, Operating Manual and Service Manual is available for free download on numerous websites.  Here is some additional info:   The Yaesu FRG-7700 is a multi-mode receiver covering 150 kHz to 30 MHz in 1 MHz bands to include all longwave, medium wave (AM) and shortwave frequencies. Modes of reception include LSB/CW, USB, AM and FM. An analog dial supplements the 1 kHz yellow LED digital display. The built in clock-timer includes remote activation terminals on the rear panel. Convenience features include:  Variable RF Attenuator, S-Meter, Dimmer, AGC Fast/Slow, Squelch, Tone Control and Noise Blanker. Twelve memories (fine tunable with M FINE knob), are available if the optional MU7700 memory unit is installed on the rear panel. The rear panel has dual antenna inputs, remote timer activation jacks and speaker output.  The detailed well lit photos are a perfect representation of the condition. Enlarge them and ask questions before bidding please. All equipment is sold as vintage electronics and may need repairs and parts replaced over time - SOLD AS IS - NO RETURNS.   US BUYERS PAYS FEDEX SHIPPING ONLY CONTINENTAL USA WE DO NOT SHIP TO P.O. BOXES We strive for 100% customer satisfaction. Incredible customer service along with a fun auction experience is our number one goal! I have successfully shipped delicate vintage radios and electronics for over 20 years - all over the globe. I double-box, bubble wrap and use plenty of padding...at no extra charge! This is a real auction....99 Cents OPENING BID...NO RESERVE...NO REGRETS! PLEASE VIEW MY OTHER AUCTIONS FOR MORE QUALITY VINTAGE ELECTRONICS

YAESU FT-847 All Mode HF/VHF/UHF / 50Hz avec UHF/VHF satellite complet avec micro yaesu et son cable alimentation (Voir Photos) Tres bel état - Fonctionnement 100% ok Very good conditions and great working conditions too comes with his yaesu microphone and AC cable We ship all over the world in good packaging 73's Fabien F4CHE

Receiver HF/VHF/UHF and SHF 1(Khz to 3.3 Ghz All modes + Remote controler + Software, in Original box. Mint Conditions,  

Miniwhip Active Antenna HF LF VlF Mini Whip Shortwave SDR RX Portable Recei M ZH Description: MINIWHIP VLF LF HF ACTIVE ANTENNA.This is known PA0NHC newest design of MiniWhip Antenna. I have redesigned and built it on SMD components but the circuit diagram itself stayed the same as it had been described on his web page in open source. This sale includes the MiniWhip and Power Splitter assembled and tested boards. They go with its circuit diagrams and part list specification. No cables or connectors are included. This new version of PA0NHC MiniWhip Antenna has these features.New version, using modern BF998 and BCX54 semi conductors.Real class A circuitry, clean reception without IMD.One coax connection.Broadband R/C coupling to the receiver, no transformer For best signal-to-noise ratio:install the Miniwhip onto a well grounded mast.connect "GND" of the Miniwhip PCB to that mast.place HI-Ui ferrite cores (Ui bwtween 5000 and 10.000) on the beginning and end of all cables to block cable noise currents. Specifications: Frequency range: 10 KHz - 30 MHz Power: 12 - 15 volts at 150 mA Second order output intercept point: Greater than + 70 dBm Third order output intercept point: Greater than + 30 dBm Maximum output power: in excess of - 15 dBm PCB Size: Length (mm): As the picture show Connector: BNC Feed line: 50 - 100 ohm coaxial cable up to 100 meter long T o note please: Each antenna performs as good as its installation permits it to. Any active antenna is not working good inside the house! It should be mounted OUTSIDE and as high as possible. Place this MiniWhip antenna PCB inside suitable enclosure of your choise and mount outside the house. Probably for the enclosure you can use a piece of the PVC tube which available in varios diameters in a local store. Do not use metal enclosure! It wont work there! For max. sensitivity: this antenna should be positioned as high and free from meta Package include: 1Set Board Note:   The color might be a little different from the actual product due to color display of different monitors.  Please allow 1-3 cm error. Le 16-nov.-19 à 10:16:12 Paris, le vendeur a ajouté les informations suivantes:

Récepteur HF KENWOOD R2000 En superbe état, emballage d'origine. Rapport récent de révision CSY & SON   The R-2000 tunes from 100 to 29999.9 kHz in five modes (AM, FM, USB, LSB, and CW). The R-2000 presents the listener with three different  tuning rates (and a frequency lock)  plus convenient 1 MHz UP/DOWN buttons. A noise blanker, four position attenuator, AGC and all mode squelch are also included. The ten channel memory stores frequency and mode. The band-scan mode permits the R-2000 to scan between two user selected frequencies (at three rates!). The built-in seven digit fluorescent tube  digital display  indicates frequency to the nearest 100 Hz. With dimmer switch.  The dual 24 hour quartz digital clock-timer can be used to activate the radio and an auxiliary device (recorder, etc.) for absentee DXing.  The large front mounted  speaker  insures good fidelity.  The rear panel has input for coaxial or hi-Z wire antennas.  radioamateur icom kenwood ts yaesu Paiement uniquement chèque ou virement

Vends un émetteur récepteur ICOM IC-706 MK1 HF/50MHz 100W & VHF 10W en excellent état de présentation et de fonctionnement. État absolument irréprochable sur toutes les bandes et tous les modes. Appareil de secours ayant très peu servi, livré dans son carton d'origine avec mode d'emploi en français, microphone HM103 et cordon d'alimentation. Appareil n'ayant subi aucune modification. 0.03-200 MHz Receive Alpha memories RITPreamp/ATTVFO A/B 1 Hz DisplayIF Shift Scanning S/RF Meter 100 Watts HF+6M 10 Watts 2M 100 Memories All band Multimode Removable head (with opt. cable) Preamp/RF Atten. Mini Spectrum Scope Electronic KeyerSSB Carrier Point ATTENTION: shipping cost for the USA / CANADA AMÉRIQUE DU SUD etc (outside Europe): 58€

  Description: MINIWHIP VLF LF HF ACTIVE ANTENNA.This is known PA0NHC newest design of MiniWhip Antenna. I have redesigned and built it on SMD components but the circuit diagram itself stayed the same as it had been described on his web page in open source. This sale includes the MiniWhip and Power Splitter assembled and tested boards. They go with its circuit diagrams and part list specification. No cables or connectors are included. This new version of PA0NHC MiniWhip Antenna has these features.New version, using modern BF998 and BCX54 semi conductors.Real class A circuitry, clean reception without IMD.One coax connection.Broadband R/C coupling to the receiver, no transformer For best signal-to-noise ratio:install the Miniwhip onto a well grounded mast.connect "GND" of the Miniwhip PCB to that mast.place HI-Ui ferrite cores (Ui bwtween 5000 and 10.000) on the beginning and end of all cables to block cable noise currents. Specifications: Frequency range: 10 KHz - 30 MHz Power: 12 - 15 volts at 150 mA Second order output intercept point: Greater than + 70 dBm Third order output intercept point: Greater than + 30 dBm Maximum output power: in excess of - 15 dBm PCB Size: Length (mm): As the picture show Connector: BNC Feed line: 50 - 100 ohm coaxial cable up to 100 meter long T o note please: Each antenna performs as good as its installation permits it to. Any active antenna is not working good inside the house! It should be mounted OUTSIDE and as high as possible. Place this MiniWhip antenna PCB inside suitable enclosure of your choise and mount outside the house. Probably for the enclosure you can use a piece of the PVC tube which available in varios diameters in a local store. Do not use metal enclosure! It wont work there! For max. sensitivity: this antenna should be positioned as high and free from meta Package include: 1Set Board Note:   The color might be a little different from the actual product due to color display of different monitors.  Please allow 1-3 cm error.     Le 16-oct.-19 à 20:29:37 Paris, le vendeur a ajouté les informations suivantes:

Radioamateurs SWL: Récepteur HF Icom ICR71E avec options filtres FL44A et FL32A et mode FM En parfait état esthétique et fonctionnement. 100kHz-30MHz range 2 VFO's AM, FM(optional), LSB, USB, CW, RTTY 32 memory channels Analogue signal meter Pass Band Tuning (not in all production units) IF notch Adjustable AGC Adjustable noise blanker (NB) Built-in preamplifier/attenuator Tone control

Description: MINIWHIP VLF LF HF ACTIVE ANTENNA.This is known PA0NHC newest design of MiniWhip Antenna. I have redesigned and built it on SMD components but the circuit diagram itself stayed the same as it had been described on his web page in open source. This sale includes the MiniWhip and Power Splitter assembled and tested boards. They go with its circuit diagrams and part list specification. No cables or connectors are included. This new version of PA0NHC MiniWhip Antenna has these features.New version, using modern BF998 and BCX54 semi conductors.Real class A circuitry, clean reception without IMD.One coax connection.Broadband R/C coupling to the receiver, no transformer For best signal-to-noise ratio:install the Miniwhip onto a well grounded mast.connect "GND" of the Miniwhip PCB to that mast.place HI-Ui ferrite cores (Ui bwtween 5000 and 10.000) on the beginning and end of all cables to block cable noise currents. Specifications: Frequency range: 10 KHz - 30 MHz Power: 12 - 15 volts at 150 mA Second order output intercept point: Greater than + 70 dBm Third order output intercept point: Greater than + 30 dBm Maximum output power: in excess of - 15 dBm PCB Size: Length (mm): As the picture show Connector: BNC Feed line: 50 - 100 ohm coaxial cable up to 100 meter long T o note please: Each antenna performs as good as its installation permits it to. Any active antenna is not working good inside the house! It should be mounted OUTSIDE and as high as possible. Place this MiniWhip antenna PCB inside suitable enclosure of your choise and mount outside the house. Probably for the enclosure you can use a piece of the PVC tube which available in varios diameters in a local store. Do not use metal enclosure! It wont work there! For max. sensitivity: this antenna should be positioned as high and free from meta Package include: 1Set Board Note:   The color might be a little different from the actual product due to color display of different monitors.  Please allow 1-3 cm error. Le 02-nov.-19 à 04:55:03 Paris, le vendeur a ajouté les informations suivantes:

Description: MINIWHIP VLF LF HF ACTIVE ANTENNA.This is known PA0NHC newest design of MiniWhip Antenna. I have redesigned and built it on SMD components but the circuit diagram itself stayed the same as it had been described on his web page in open source. This sale includes the MiniWhip and Power Splitter assembled and tested boards. They go with its circuit diagrams and part list specification. No cables or connectors are included. This new version of PA0NHC MiniWhip Antenna has these features.New version, using modern BF998 and BCX54 semi conductors.Real class A circuitry, clean reception without IMD.One coax connection.Broadband R/C coupling to the receiver, no transformer For best signal-to-noise ratio:install the Miniwhip onto a well grounded mast.connect "GND" of the Miniwhip PCB to that mast.place HI-Ui ferrite cores (Ui bwtween 5000 and 10.000) on the beginning and end of all cables to block cable noise currents. Specifications: Frequency range: 10 KHz - 30 MHz Power: 12 - 15 volts at 150 mA Second order output intercept point: Greater than + 70 dBm Third order output intercept point: Greater than + 30 dBm Maximum output power: in excess of - 15 dBm PCB Size: Length (mm): As the picture show Connector: BNC Feed line: 50 - 100 ohm coaxial cable up to 100 meter long T o note please: Each antenna performs as good as its installation permits it to. Any active antenna is not working good inside the house! It should be mounted OUTSIDE and as high as possible. Place this MiniWhip antenna PCB inside suitable enclosure of your choise and mount outside the house. Probably for the enclosure you can use a piece of the PVC tube which available in varios diameters in a local store. Do not use metal enclosure! It wont work there! For max. sensitivity: this antenna should be positioned as high and free from meta Package include: 1Set Board Note:   The color might be a little different from the actual product due to color display of different monitors.  Please allow 1-3 cm error. Le 18-nov.-19 à 18:30:46 Paris, le vendeur a ajouté les informations suivantes:

Description: MINIWHIP VLF LF HF ACTIVE ANTENNA.This is known PA0NHC newest design of MiniWhip Antenna. I have redesigned and built it on SMD components but the circuit diagram itself stayed the same as it had been described on his web page in open source. This sale includes the MiniWhip and Power Splitter assembled and tested boards. They go with its circuit diagrams and part list specification. No cables or connectors are included. This new version of PA0NHC MiniWhip Antenna has these features.New version, using modern BF998 and BCX54 semi conductors.Real class A circuitry, clean reception without IMD.One coax connection.Broadband R/C coupling to the receiver, no transformer For best signal-to-noise ratio:install the Miniwhip onto a well grounded mast.connect "GND" of the Miniwhip PCB to that mast.place HI-Ui ferrite cores (Ui bwtween 5000 and 10.000) on the beginning and end of all cables to block cable noise currents. Specifications: Frequency range: 10 KHz - 30 MHz Power: 12 - 15 volts at 150 mA Second order output intercept point: Greater than + 70 dBm Third order output intercept point: Greater than + 30 dBm Maximum output power: in excess of - 15 dBm PCB Size: Length (mm): As the picture show Connector: BNC Feed line: 50 - 100 ohm coaxial cable up to 100 meter long T o note please: Each antenna performs as good as its installation permits it to. Any active antenna is not working good inside the house! It should be mounted OUTSIDE and as high as possible. Place this MiniWhip antenna PCB inside suitable enclosure of your choise and mount outside the house. Probably for the enclosure you can use a piece of the PVC tube which available in varios diameters in a local store. Do not use metal enclosure! It wont work there! For max. sensitivity: this antenna should be positioned as high and free from meta Package include: 1Set Board Note:   The color might be a little different from the actual product due to color display of different monitors.  Please allow 1-3 cm error. Le 17-nov.-19 à 11:15:12 Paris, le vendeur a ajouté les informations suivantes:

Description: MINIWHIP VLF LF HF ACTIVE ANTENNA.This is known PA0NHC newest design of MiniWhip Antenna. I have redesigned and built it on SMD components but the circuit diagram itself stayed the same as it had been described on his web page in open source. This sale includes the MiniWhip and Power Splitter assembled and tested boards. They go with its circuit diagrams and part list specification. No cables or connectors are included. This new version of PA0NHC MiniWhip Antenna has these features.New version, using modern BF998 and BCX54 semi conductors.Real class A circuitry, clean reception without IMD.One coax connection.Broadband R/C coupling to the receiver, no transformer For best signal-to-noise ratio:install the Miniwhip onto a well grounded mast.connect "GND" of the Miniwhip PCB to that mast.place HI-Ui ferrite cores (Ui bwtween 5000 and 10.000) on the beginning and end of all cables to block cable noise currents. Specifications: Frequency range: 10 KHz - 30 MHz Power: 12 - 15 volts at 150 mA Second order output intercept point: Greater than + 70 dBm Third order output intercept point: Greater than + 30 dBm Maximum output power: in excess of - 15 dBm PCB Size: Length (mm): As the picture show Connector: BNC Feed line: 50 - 100 ohm coaxial cable up to 100 meter long T o note please: Each antenna performs as good as its installation permits it to. Any active antenna is not working good inside the house! It should be mounted OUTSIDE and as high as possible. Place this MiniWhip antenna PCB inside suitable enclosure of your choise and mount outside the house. Probably for the enclosure you can use a piece of the PVC tube which available in varios diameters in a local store. Do not use metal enclosure! It wont work there! For max. sensitivity: this antenna should be positioned as high and free from meta Package include: 1Set Board Note:   The color might be a little different from the actual product due to color display of different monitors.  Please allow 1-3 cm error. Le 21-nov.-19 à 15:16:08 Paris, le vendeur a ajouté les informations suivantes:

Description: MINIWHIP VLF LF HF ACTIVE ANTENNA.This is known PA0NHC newest design of MiniWhip Antenna. I have redesigned and built it on SMD components but the circuit diagram itself stayed the same as it had been described on his web page in open source. This sale includes the MiniWhip and Power Splitter assembled and tested boards. They go with its circuit diagrams and part list specification. No cables or connectors are included. This new version of PA0NHC MiniWhip Antenna has these features.New version, using modern BF998 and BCX54 semi conductors.Real class A circuitry, clean reception without IMD.One coax connection.Broadband R/C coupling to the receiver, no transformer For best signal-to-noise ratio:install the Miniwhip onto a well grounded mast.connect "GND" of the Miniwhip PCB to that mast.place HI-Ui ferrite cores (Ui bwtween 5000 and 10.000) on the beginning and end of all cables to block cable noise currents. Specifications: Frequency range: 10 KHz - 30 MHz Power: 12 - 15 volts at 150 mA Second order output intercept point: Greater than + 70 dBm Third order output intercept point: Greater than + 30 dBm Maximum output power: in excess of - 15 dBm PCB Size: Length (mm): As the picture show Connector: BNC Feed line: 50 - 100 ohm coaxial cable up to 100 meter long T o note please: Each antenna performs as good as its installation permits it to. Any active antenna is not working good inside the house! It should be mounted OUTSIDE and as high as possible. Place this MiniWhip antenna PCB inside suitable enclosure of your choise and mount outside the house. Probably for the enclosure you can use a piece of the PVC tube which available in varios diameters in a local store. Do not use metal enclosure! It wont work there! For max. sensitivity: this antenna should be positioned as high and free from meta Package include: 1Set Board Note:   The color might be a little different from the actual product due to color display of different monitors.  Please allow 1-3 cm error. Le 19-déc.-19 à 03:27:15 Paris, le vendeur a ajouté les informations suivantes:

PLEASE READ ALL THE ANOUNCEMENT ! Amplificateur HF: TAGRA GL-150, 100 watts CB et radioamateur en parfait état de présentation et de fonctionnement, quasiment jamais servi. Fonctionne parfaitement de 24MHz à 30 MHz et peut sortir jusqu'à 120 watts sur 27MHz pour seulement 8 watts en puissance drive! Utilise un seul transistor 2SC2290. Fabrication Française ATENTION: the shipping costs will be adjusted to the real cost of the FRENCH post in colissimo INTERNATIONAL with insurance according to the country which will win the bid. Exemple: USA CANADA BRESIL: 28€. BELGIUM SPAIN ENGLAND ITALY GERMANY: 17€

Description: MINIWHIP VLF LF HF ACTIVE ANTENNA.This is known PA0NHC newest design of MiniWhip Antenna. I have redesigned and built it on SMD components but the circuit diagram itself stayed the same as it had been described on his web page in open source. This sale includes the MiniWhip and Power Splitter assembled and tested boards. They go with its circuit diagrams and part list specification. No cables or connectors are included. This new version of PA0NHC MiniWhip Antenna has these features.New version, using modern BF998 and BCX54 semi conductors.Real class A circuitry, clean reception without IMD.One coax connection.Broadband R/C coupling to the receiver, no transformer For best signal-to-noise ratio:install the Miniwhip onto a well grounded mast.connect "GND" of the Miniwhip PCB to that mast.place HI-Ui ferrite cores (Ui bwtween 5000 and 10.000) on the beginning and end of all cables to block cable noise currents. Specifications: Frequency range: 10 KHz - 30 MHz Power: 12 - 15 volts at 150 mA Second order output intercept point: Greater than + 70 dBm Third order output intercept point: Greater than + 30 dBm Maximum output power: in excess of - 15 dBm PCB Size: Length (mm): As the picture show Connector: BNC Feed line: 50 - 100 ohm coaxial cable up to 100 meter long T o note please: Each antenna performs as good as its installation permits it to. Any active antenna is not working good inside the house! It should be mounted OUTSIDE and as high as possible. Place this MiniWhip antenna PCB inside suitable enclosure of your choise and mount outside the house. Probably for the enclosure you can use a piece of the PVC tube which available in varios diameters in a local store. Do not use metal enclosure! It wont work there! For max. sensitivity: this antenna should be positioned as high and free from meta Package include: 1Set Board Note:   The color might be a little different from the actual product due to color display of different monitors.  Please allow 1-3 cm error. Le 11-mars-20 à 13:30:27 Paris, le vendeur a ajouté les informations suivantes:

Description: MINIWHIP VLF LF HF ACTIVE ANTENNA.This is known PA0NHC newest design of MiniWhip Antenna. I have redesigned and built it on SMD components but the circuit diagram itself stayed the same as it had been described on his web page in open source. This sale includes the MiniWhip and Power Splitter assembled and tested boards. They go with its circuit diagrams and part list specification. No cables or connectors are included. This new version of PA0NHC MiniWhip Antenna has these features.New version, using modern BF998 and BCX54 semi conductors.Real class A circuitry, clean reception without IMD.One coax connection.Broadband R/C coupling to the receiver, no transformer For best signal-to-noise ratio:install the Miniwhip onto a well grounded mast.connect "GND" of the Miniwhip PCB to that mast.place HI-Ui ferrite cores (Ui bwtween 5000 and 10.000) on the beginning and end of all cables to block cable noise currents. Specifications: Frequency range: 10 KHz - 30 MHz Power: 12 - 15 volts at 150 mA Second order output intercept point: Greater than + 70 dBm Third order output intercept point: Greater than + 30 dBm Maximum output power: in excess of - 15 dBm PCB Size: Length (mm): As the picture show Connector: BNC Feed line: 50 - 100 ohm coaxial cable up to 100 meter long T o note please: Each antenna performs as good as its installation permits it to. Any active antenna is not working good inside the house! It should be mounted OUTSIDE and as high as possible. Place this MiniWhip antenna PCB inside suitable enclosure of your choise and mount outside the house. Probably for the enclosure you can use a piece of the PVC tube which available in varios diameters in a local store. Do not use metal enclosure! It wont work there! For max. sensitivity: this antenna should be positioned as high and free from meta Package include: 1Set Board Note:   The color might be a little different from the actual product due to color display of different monitors.  Please allow 1-3 cm error. Le 04-avr.-20 à 15:50:26 Paris, le vendeur a ajouté les informations suivantes:

DR-7800 can be ideally used for HF email, for example, over the Winlink network. Externally, it stands out due to its high-resolution OLED display which, among other things, can be configured for waterfall and spectral views. Thanks to its reliability and low power consumption of 3 W, the modem is also well-suited for distress radio communications and other applications under severe conditions.   Modes: PACTOR-4, PACTOR-3, PACTOR-2, PACTOR-1 Weather-FAX (Receive) RTTY NAVTEX (Receive) Packet Radio 1k2, Packet Radio 9k6, Robust PR PSK31 DR-7800 Pactor controller: GPS decoder Processor: Quadcore-DSP by Freescale, 6400 MIPS, 64 Bit Connections: USB GPS antenna (RS232- and TTL) 2 x radio AF/PTT (Main, Aux, confi gurable - PTC-II compatible or symmetrical, opt. dual-port operation) 1 x radio-remote control (all usual transceiver types) microphone input loudspeaker output (2 W) Audio level / imp.: Input: max 5.5V p-p, 15kΩ, output: max. 9V p-p, 300Ω Display: 256 x 64 pixel OLED, blue, high contrast, excellent readability, no viewing angle problems, display of spectrum and much more Power supply: 10 - 26 V 400 mA (max at 10 V input) Weight / size: 770 g, 172 x 43 x 205 mm (width, height and depth) package contents: 1 MODEM DR-7800 1 USB cable 1 DIN 8 PIN cable for ICOM transceiver (wires need to be soldered on the other side) 1 DIN 13 PIN cable for ICOM tranceive r (wires need to be soldered on the other side) 1 Installation guide 1 CD-ROM New, open but never used ! Perfect for sailor, navigator or radioamateur ! Pay attention: no shipping outside Europe

IC-700R Receiver HF 0-30 Mhz All modes,  Look very nice, Working perfectly. mint conditions. Collection

Receiver HF 0-30 Mhz All modes,  Look very nice, Working perfectly. mint conditions.

Comme un neuf parfait en tout point Livré avec micro, mode emploi et cordon alimentation. Perfect as new for all. With mike, manual et 12v cord.

Daiwa All Mode Active Filter, AF-606K. The filter allows you to filter the incoming audio of your HF transceiver for maximum readability of received signal (SSB/CW). Controls on front of unit as follows: - Notch: 500, 1.2K, 1.5K, 1.7K, 2.0K, 2.5K (Hz) - PLL: 500, 650, 850, 1.0K, 1.1K, 1.2K (Hz) - Band Pass: 500, 700, 850, 1.0K, 1.2K (Hz) - Mode: "Notch"; SSB 2.5K, 2.0K, or 1.5K; CW 140, 110, or 80; "PLL". - Power On/Off switch - Headphone (1/4") output. Connections on back as follows: - 13.8VDC input (2.1 or 2.5mm coaxial) - External speaker 8ohm (phono jack) - Input (phone jack) - Tone adjustment dial - Width adjustment dial - Volume (UNIT HAS BUILT-IN SPEAKER) International ebayer please ask for shipping cost. Work with Icom Yaesu Kenwood drake ameritron db6nt elecraft eme radiall triode tetrode hamradio

Yaesu HF Transceiver all modes SSB/CW/AM/FM, keyer electronic, Memory board inclued, 28Mhz= 11m crystals, Working perfect !! Original Mic (handle) Tuning steps: Continuous Mode: AM/FM/SSB/CW/FSK Channels/memory management: 1 RX and 1 TX Repeater shift/offset: No dedicated. Use VFO A/B split (with FV-901) or memory split Power supply: 13.8 VDC or mains: 100 / 110 / 117 / 200 / 220 / 234 VAC Current drain/power consumption: RX: 1.1 A (heater off) @ 13.5 VDC TX: Max 21 A @ 13.5 VDC Antenna impedance/connector: 50-75 ohms / SO-239 Dimensions (W*H*D): 342*154*324 mm (13.46*6.06*12.76") Weight: 18 Kg (39.7 lbs)

Livré complet dans sont carton d' origine + le micro d' origine YAESU, et le cordon d' alimentation 12V + la copie de la notice d' utilisation en Français. Le TX est en très bon état de fonctionnement et d'esthetique. Émetteur-récepteur 0,1-30 MHz en réception et bandes 1,8 3,5 7 10 14 18 21 24 28 MHz en émission. (bande 11 metres incluse)  Boîte d’accord automatique intégrée. Filtres 500Hz et 2.4kHz ntégrés. Tous modes:  AM/FM/USB/LSB/CW/RTTY/PKT/FSK Ce modèle a d'énormes possibilités numériques. Puissance de sortie: 100 Watts HF. Version EPROM: 1.30 Alimentation en 12V seulement, possibilité de fournir gratuitement une alimentation externe faite "maison" 18A qui fonctionne très bien avec, mais ça fera grimper un peu les frais d'envoi. Envoi possible par Mondial Relay en: Allemagne,  Autriche, Belgique, Espagne, Italie, Luxembourg, Portugal, Royaume-uni. Tarif à convenir ensembles. Possible to send via Mondial Relay in: Germany, Austria, Belgium, Spain, Italy, Luxembourg, Portugal, UK. Fees to see together. Es its möglich durch Mondial Relay zu sender in: Österreich, Belgien, Deutschland, Italien, Luxemburg, Portugal, Spanien, Vereinigtes Königreich, Gebühren, um zusammen zu sehen.

sans chargeur ! The VC-300D is similar to the  VC-300DLP, but it has a 21 segment bargraph display that makes analyzing SSB power easy. LED meter shows peak reading and has fully adjustable level and delay controls. You can tune any real antenna from 1.8 to 30 MHz, including all MARS and WARC bands. Use verticals, dipoles, inverted vees, yagis, quads, long-wires, whips, G5RVs, etc. Has 4:1 balun for balanced line antennas. Handles up to 300 Watts SSB PEP, 200 Watts continuous (150 Watts on 1.8 MHz). The VC-300D backlit Cross-Needle Meter displays SWR, forward and reflected power simultaneously. Reads both peak and average power on 30/300 Watt scales. Meter lamp has front panel switch and uses 12 VDC or 110 VAC with AC-12 adaptor (not Inc.) The VC-300D either position antenna switch lets you select two coax fed antennas, random wire/balanced line or built-in dummy load for use through your tuner or direct to your transceiver. Bypass position bypasses your tuner but keeps your SWR Power meter in line. A built-in 50 Ohm dummy load makes tuning up your rig easy! Use it for testing and repairing your rig, setting power level adjusting your mic gain and more. The finest components available and the highest quality construction gives you the best 300 Watt tuner that you can buy.  DL-650M IT, DUMMY LOAD, 1500W, 0-650 MHZ $79.95  each  LP-30 LOW PASS FILTER, 1500W $89.95  each  VEC-131K KIT, AIRCRAFT RECEIVER $29.95  each  VEC-621 TUNER, 2M/220 MHZ ANTENNA TUNER $89.95  each

  The MFJ-259B SWR analyzer features a built-in 10 digit high-contrast LCD frequency counter. Reading your antennas SWR and finding its resonance has never been easier. All you do is connect your antenna, set your SWR analyzer to the frequency you want and read your SWR. MFJ-259B gives you a complete pictures of your antenna's performance. You can read antenna SWR and Complex Impedance 1.8 to 170 MHz. Read Complex Impedance as series resistance and reactance (R+jX) or as magnitude (Z) and phase (degrees). You can determine velocity factor, coax cable loss in dB, length of coax and distance to a short or open in feet. You can read SWR, return loss and reflection coefficient at any frequency simultaneously at a single glance. Also read inductance in UH and capacitance in pF at RF frequencies. The large easy-to-read two line LCD screen and side-by-side meters clearly display your information. The built-in frequency counter, Ni-Cad charger circuit, battery saver, low battery warning and smooth re-duction drive tuning and much more. The MFJ-259B is easy to use! Just set the bandswitch and tune the dial -- just like your transceiver. SWR and complex Impedance are displayed instantly! The MFJ-259B is a complete ham radio test station including -- frequency counter, RF signal generator, SWR Analyzer, RF resistance and Reactance Analyzer, Coax Analyzer, Capacitance and Inductance Meter and more!