Nutram sound balanced

Balanced & matched pair 12AX7A / ECC83 double triode - MAZDA " silver plate " Une paire de tubes double triode MAZDA comme neufs, sans court-circuit ni fuite gazeuse. Les deux tubes portent les mêmes marquages, fabrication française des années 60. Getter simple en anneau, 2 MICA, plaques "argentées" 13 mm. Tubes équilibrés, appairés avec lampe-mètre digital. Valeurs mesurées de courant et de transconductance avec Va=250 V et Vg1=-2 V (1,2 mA et 1,6 mA/V nominal selon le data sheet MAZDA de 1968): Tube 1, triode 1 --> Ia=0,8 mA, Gm=1,2 mA/V Tube 1, triode 2 --> Ia=0,8 mA, Gm=1,2 mA/V Tube 2, triode 1 --> Ia=0,9 mA, Gm=1,4 mA/V Tube 2, triode 2 --> Ia=1,0 mA, Gm=1,5 mA/V Paire également testée sur un ampli Yaqin MC100B : très bon son, sans microphonie ni bruit. Une seule boite d'origine.   Frais de port UE : 15 € Frais de port hors UE : 25 €       One pair (2 pcs) of MAZDA double triodes in mint condition, nos shorts, no gas leak. Both tubes have the same markings, made in France in the sixties. Single ring getter, 2 MICA, 13 mm "silver" plates. Balanced tubes, matched with digital tube tester. Measured current and transconductance with Va=250 V and Vg1=-2 V (1.2 mA et 1.6 mA/V nominal according to 1968 MAZDA data sheet): Tube 1, triode 1 --> Ia=0.8 mA, Gm=1.2 mA/V Tube 1, triode 2 --> Ia=0.8 mA, Gm=1.2 mA/V Tube 2, triode 1 --> Ia=0.9 mA, Gm=1.4 mA/V Tube 2, triode 2 --> Ia=1.0 mA, Gm=1.5 mA/V The pair is also tested on Yaqin MC100B amplifier: great sound, no microphonics, no noise. Only one original box.   EU shipping: 15 € Rest of the world: 25 €

Vend mixette de reportage Sound Devices 442 + sacoche Petrol + 2 cables de connection camera 4 Balanced XLR Inputs The mixer's flexibility begins with it's 4 balanced XLR inputs. All 4 inputs are individually switchable to accept line or microphone level signals. Direct Outputs Every input features a dedicated output via TA3-male connectors. The direct outs are ideal for feeding individual channel signal to external devices. M-S Decoding Channels 1-2 can be linked for stereo capturing and M-S stereo monitoring. Channel 1 features a phase reverse switch. Variable Gain Continuously variable gain allows level contouring on every channel, resulting in higher signal to noise ratio. Variable Low-Cut Filter Continuously variable low-cut filter dials are located on each channel, eliminating low frequency noise between 80 - 240Hz Peak Limiting Input and output peak limiters eliminate signal over load that can cause noise and distortion.

For sale used iBasso DC04 USB-C balanced DAC and audio amplifier, with little use and in excellent condition. Basso DC04 2xCS43131 DSD Android USB Type-C to 4.4mm Headphone Amplifier Decode Cable Description DC04, the second-generation decoder amplifier, dual DAC true balanced decoding amplifier cable Double CS43131 decoder chip Bottom noise THD + N 32 Ω @ 195 mw 4.4mm balanced interface Dual DAC balanced decoding amp cable opens a new era of sound quality for mobile phones DC04 uses two high-performance HiFi decoding chips CS43131 to build a 4-channel DAC true balanced output line, which can significantly improve the resolution and channel separation, and present rich sound details. Cirrus Logic's next generation CS43131 with MasterHIFI™ technology has great potential and sweet and pleasant sound. DC04 double DAC design, double material, to ensure the second generation of decoder cable with high quality sound. True gold is not afraid of fire, hard power is not afraid of PK Indicators are not the only way to verify sound quality, but they do tell you a lot about the quality of a product's design. Signal-to-noise ratio: 133 dB, bottom noise The above are AP measurement indicators, stand out in the decoder cable products! Based on super group index, adjust the charming voice The core index of DC04 audio is superior to others, with a signal-to-noise ratio of 133dB and THD+N reaching 0.00032%, leaving the similar products far behind. Even compared to high-end HIFI players, it does not fall behind. Based on the outstanding indicators, the DC04 has been tuned hundreds of times to produce an amazing sound. The background noise reaches the level of Nano volt, approaches zero, and is clean and transparent In AP practice, DC04 bottom noise small than 0.9μV(900nV), be ahead of the similar kind products. The outstanding bottom noise control allows the DC04 to maintain a clean sound base and immerse listeners in the music. Japan Pentaconn original 4.4mm interface, high-quality interface, achieve good audiophile sound On the DC04, we adopted the original high-quality 4.4mm balanced interface from Japan Pentaconn. The price is high, but it has excellent sound effects, reliable stability and longer service life. 4-channel DAC true balanced output, 195mW@32Ω, even more powerful Thanks to DC04's internal 4-channel DAC true balanced output line, the output power is more than 1.5 times that of DC01 under a 32Ω load, reaching an astonishing 195mW, and even hard-to-push in-ear headphones can do well. Under a load of 300Ω, the maximum output level is as high as 4Vrms, which is more outstanding than some mainstream players, and it is also handy for large impedance headphones. Do not miss every detail, the use of a satisfactory experience The metal case of the DC04 adopts a wiredrawing process, with a delicate look and attractive touch, comparable to high-end HIFI players. Select 4 strands copper-plated silver audiophile cable, bring you a more comfortable experience. From Android phones to computers, it can meet the needs of all scenarios DC04 adopts type-C interface and uses standard UAC2.0 sound card chip, which is not only compatible with most Android phones and tablets in the market, but also can connect to Apple /Windows computers through the C-A adapter, easily realizing external decoding. Plug and play, get up anytime, anywhere. Provide exclusive APK software, realize 64 level hardware volume adjustment Mobile phones usually use software algorithms to adjust the volume, which is only about 10 levels in general. The volume range of each level varies greatly, making it difficult to provide fine adjustment. The output level of DC04 is as high as 4Vrms, which can be very loud even if the phone is only 1. To this end, we wrote a

The MATCH-IT and MATCH-IT2 allow the benefits of inexpensive domestic and semi-professional source equipment to be applied to the professional installation with minimum compromise in sound quality. As well as substantial cost savings, such machines also offer wider choice and availability compared to their professional brethren and, if well chosen, can prove extremely reliable. Mounted as close to the source equipment as possible, the MATCH-IT/MATCH-IT2 translate between the low level, unbalanced signals used by consumer devices and the higher amplitude, more noise-immune, balanced format found in the professional environment. From that point onwards, mains hum and interference from densely packed equipment will be rejected. Both units are packaged in a robust metal case suited to mounting on rack shelves or in the Canford “Rack-Pak”, beneath woodwork or inside rack cabinets by means of screws, ties or sticky pads. They are supplied with a mains lead, comprehensive instructions and a five year warranty. MATCH-IT Bidirectional Matching Unit Provides matching in both the record (balanced to unbalanced conversion) and replay (unbalanced to balanced) directions for one piece of domestic recording equipment, such as a tape or Mini-Disk recorder. The gain of both sections may be individually varied over a wide range that includes 0dB for higher level sources requiring balancing but no amplification. Technical Specification:Unbalanced to balanced sections (MATCH-IT and MATCH-IT2):Inputs:Unbalanced, RCA (phono)Input impedance:22k ohms Maximum input level:+24dBuNominal gain range:0dB to +25dBOutput noise:-94dB RMS re +8dBu O/P (20Hz-22kHz, +14dB gain)Harmonic distortion:0.005%THD (1kHz, +8dBu O/P)Frequency response:20Hz-20kHz ±0.1dBOutputs:Electronically balanced, XLR maleMaximum output level:+24dBu (10k ohms load), +23.5dBu (600ohms load)Balanced to unbalanced sections (Match-IT only):Inputs:Electronically balanced, XLR femaleInput impedance:20k ohms Maximum input level:+25dBuInput CMRR:60dB typ.Nominal gain range:-25dB to 0dBOutput noise:-94dB RMS re +8dBu I/P (20Hz-22kHz, -14dB gain)Harmonic distortion:0.005% (1kHz THD, -14dBu O/P)Frequency response:20Hz-20kHz ±0.1dBOutputs:Unbalanced, RCA (phono)Maximum output level:+24dBu (10k ohms load)MATCH-IT and MATCH-IT2:Power supply:230 VAC ±10% at 6VA (115V to special order)Dimensions(excluding connectors):294(w) x 114(d) x 44(h)mmWeight:0.9kg CONTACT for INTERNATIONAl SHIPPING FEES

For sale a pair of used in-ear headphones Sony XBA-NC85D. The earphones have very little use (almost as new), are in excellent condition and in perfect working order. Included: •    Earphones •    3 pairs of silicone tips •    Carrying case •    Shirt clip •    USB charging adapter •    Adapter for in-flight use Shipping out of France - fast delivery and no custom fees for destinations within EU. Earphones will be carefully packed and tracking number will be provided. The Sony XBA-NC85D Balanced Armature Noise-Cancelling Headphones feature Sony's single Armature full range driver. This Japanese manufactured driver technology delivers outstanding audio clarity and profound vocals. The XBA-NC85D also features Sony's proprietary noise cancellation technology for complete isolation from loud ambient noise levels and detailed, pristine listening in any environment. The headphones feature an inline remote control and omnidirectional microphone, establishing level control and phone communication. A rechargeable battery powers the headphones. Made in Japan World's smallest and lightest digital noise-cancelling headphones Sony's unique digital noise-cancelling software engine Balanced Armature driver Revolutionary box-free design Smart charging with USB interface Sublime sound reproduction

For sale a pair of used hybrid in-ear headphones Sony XBA-A3, with original box and accessories. The earphones are in good condition (normal signs of use, minor scuffs) and in perfect working order. Fantastic sound. Highlights: - High-Res hybrid 3-way: 16mm dynamic + 2 X balanced armature driver units - 16mm liquid crystal polymer diaphragm dynamic driver - Linear drive balanced armature driver - HD super tweeter - Impedance: 32 Ω - Sensitivity: (dB/mW): 105dB/mW - Frequency response: 3 - 40,000Hz - 1.2m detachable Silver-coated OFC Litz with inline remote and microphone (NB: Shipping out of France - fast delivery and no custom fees for destinations within EU. Earphones will be carefully packed and tracking number will be provided.

For sale a pair of used hybrid in-ear headphones Sony XBA-A3, with original box and accessories. The earphones are in good condition (normal signs of use, minor scuffs) and in perfect working order. Fantastic sound. Highlights:  - High-Res hybrid 3-way: 16mm dynamic + 2 X balanced armature driver units  - 16mm liquid crystal polymer diaphragm dynamic driver  - Linear drive balanced armature driver  - HD super tweeter  - Impedance: 32 Ω  - Sensitivity: (dB/mW): 105dB/mW  - Frequency response: 3 - 40,000Hz  - 1.2m detachable Silver-coated OFC Litz with inline remote and microphone (NB: XBA-A3 comes originally with two cables - one with mic and one without, only the mic cable is included in this sale) Shipping out of France - fast delivery and no custom fees for destinations within EU. Earphones will be carefully packed and tracking number will be provided.

Prism Sound Dream ADA-8XR. État : "Occasion" - ADA-8XR 8AD/8DA+AES - 8 analog In (XLR), 8 analog out (XLR), Carte AES-EBU Perfect Shape / Etat parfait  Years: 2016  Feel free to ask any questions:) ---------------------------------- Overview  The ADA-8XR is a multi-channel AD/DA converter that can be in numerous ways using to suit a very wide variety of applications. It can be a 16 channel AD converter, a 16 Channel DA converter or an 8 channel AD/DA converter. It can be a, or an AES/EBU / AES3 / SPDIF Digital to Analogue or Analogue to Digital converter. It can act as a high resolution for recording or post-production. Similarly it can work with a wide range of other popular Digital Audio Workstations (DAWs) including Logic, Cubase, Nuendo and others. In fact, there's not a lot it can't do when it comes to digital audio conversion.  Applications  The ADA-8XR is the top professionals' converter of choice in the most exacting applications in music and sound recording, mastering, broadcast and post-production. Offering the cleanest and most transparent conversion available, the ADA-8XR is ideal for producers, engineers and songwriters wanting to produce top-quality results when recording, tracking & overdubbing, mixing to stereo or surround, mastering and monitoring. The ADA-8XR is perfect for recording vocal, single instruments, drums or orchestra and is just as much at home providing multiple outputs for external analogue summing. It is in use in the top studios around the world as well as being used in numerous film sound tracks.  Design Philosophy  The ADA-8XR takes the philosophy of the widely-acclaimed Prism Sound converter range a stage further: Now, the goals of ultimate sound quality, and un-matched versatility have been realised in a modular multi-channel, 24-bit 192kHz-capable format. The ADA-8XR provides A/D and D/A conversion and the essential digital interfaces with a stereo monitor mix output in digital and analogue formats.  Clocking and Synchronization  Unlike most other converter systems, the ADA-8XR is ideal as a master clock for your entire system, whether running from its precision internal reference or from an external source. No external clock source can improve the performance or influence the sound of the ADA-8XR. In addition, the ADA-8XR can run in Pro Tools Loop Sync mode, or lock to AES3, AES11 or Wordclock. The ADA-8XR delivers your recordings with perfect transparency, whatever the setup.  Configuration options  The ADA-8XR is a modular system and this provides great flexibility when creating systems with larger numbers of channels. Whether you need just a few channels of high-quality conversion or large a multi-track setup, the ADA-8XR is the natural choice. Using combinations of the basic system options and the range of digital interfaces you can build the system that perfectly matches your requirements. For more detail see the section.  ADA-8XR Summary Channel Configurations  - Up to 16 channels of state-of-the art 24-bit, 192kHz conversion in one great-sounding 2U package. - Choice of 8AD plus 8DA; 16AD; 16DA or D-D only configurations. - Dual-path architecture allows independent operation of two 8-channel paths: - Each path (bank of 8 channels) can be assigned to either record or play functions; - Each path can have independent clock references at different sample rates if desired; - Each path is independently configurable; - Each path can drive analogue and digital outputs simultaneously if desired - Allows Source Monitoring with simultaneous A/D and D/A conversion. - Electronically balanced, transformerless, galvanically isolated XLR analogue inputs and outputs ensure freedom from noise pick-up and crosstalk, with software-controlled balance and line-up; - Prism Sound 'Over-killer' selectable on analogue inputs: the best-sounding gentle limiting for louder masters - with no 'overs'; Dig

Appareil surprenant d’efficacité. Très peu utilisé, mais longuement servi récemment pour numériser des vinyles. Avec son alimentation externe et son convertisseur 220/110VAC (N'a jamais été produit en version 220V) L’emballage sera soigné Supporte le 20 bits en entrée ET en sortie, convertisseur A/D ADMOD79, D/A l'excellent TDA1547, DSP géré par PCF5020D, fonction ADOC CS8402, ADIC & ré-échantillonneur TDA1373, entrée SPDIF AES/EBU de 15 à 50 kHz, sortie 'switchable' de 44.1 à 48 kHz au dos par simple bouton... En français, transforme un Signal mono en stéréo, améliore le Son en provenance des vinyles (notamment 78 tours, mais les 45 et 33 aussi)), des disques compacts audionumériques (passe de 44.100 Hz à 48 kHz), supprime le Scratch, filtre (comme un Dolby, mais mieux)), améliore le rendu stéréo, élargit ou réduit l'effet stéréophonique, compresse/expand (les radioteurs comprendront), règle finement graves et aigus par pas de 1 dB, gère le fading, la balance et bien sûr le volume, etc.(Citation du site hifi vintage audiophile) "This product offers recording studio engineers, home studios owners, post production facilities, corporate A/V centers, archivist, and broadcast professionals unmatched performance and value for an integrated set of advanced sound processing technologies developed by Philips." The IS5021 include the following: - - 20-bit A/D converters (ADMOD79) - - High quality D/A converter (based on the Philips DAC7) - - Sample rate converter for interfacing between digital equipment operation at different sample rates. Digital Sound Processing including:  - - Jitter Removal (for cleaning up DAT recordings - - Compression/Expansion - - Noise reduction (comprising a low-pass filter with adjustable cut-off) - - QNI (Quantization Noise Imaging) - - Slave Mode (for external synchronization) - - Varispeed (pitch variation can be processed without effecting output sample rates) - - Scratch Suppression (de-clicking) - - Stereo Enhancement (stereo effect from mono) - - Spatial Stereo (widen or narrow the sound stage) - - Bass, Treble, Balance and Volume Control - - Digital Level Indication & Control (for monitor of the overall input level) These features offer the professional studio engineers tremendous versatility in the creation of digital recordings, whether from analog or digital source material. Typical applications for the IS5022 include the following:  Recording Studios/Music Production Facilities:  The 20-bit A/D converter in combination with the sample rate converter will permit the user to choose a 44.1 or 48kHz sampling frequency for the transfer of older DAT recording. Actually, any input sampling frequency between 15kHz and 50kHz will be accepted.  Broadcast Professionals/Archivists/Home Studios: The IS5022 offer a tremendous variety of easy to use tools to enhance the sound of older recordings (tape and vinyl) from the stereo enhancement capability that permits a monaural recording to be "converted" into stereo (through phase shift), to spatial stereo that widens or narrows the recording, to noise reduction and scratch suppression filters.  These capabilities, along with the D/A converter and QNI will permit recording professionals to create enhanced digital recordings, as well as transfer back to analog cassette format for substantially enhanced quality for use in portable listening applications.  Audio Post Production Facilities: Recordings made in-the-field with most commonly available portable DAT recorders can now be edited into recordings that offer improved resolution and richness along with substantially reduced jitter distortion.  Technical specifications Inputs Digital: 15-50kHz sample rate s/pdif: RCA Analog Unbalanced: RCA (L/R) Outputs Digital: 44/1/48kHz switchable s/pdif: RCA Analog Unbalanced: RCA (L/R) Performance (complete Analog Path-analog IN to OUT) Balanced S/N Ratio: 94dB (A-weighted)

For sale Cayin N5ii hi-res digital audio player, with original box and accessories + additional Cayin case. The player has had very little use (excellent condition, almost as new). Item will be carefully packed and tracking number will be provided. N5ii Best of both worlds: Balanced driven 2.5mm phone out and completely independent 3.5mm single end output. Carefully designed around the ESS9018k2m DAC chipset to deliver Cayin house sound in high resolution. Flexible and Expandable: desktop grade 2V lineout and comprehensive digital input/output options. Audio Priority mode maximizes audio performance for critical listeners. Quad-core Processor offers intuitive user experience and extraordinary digital audio capability, support DST and DTS encoded format. Extreme low jitter for portable player with THREE active oscillators, facilitate clock sync. For PCM and DSD bitstream.

For sale a pair of used Westone UM Pro 30 in-ear monitors, with original box and accessories. The earphones have been well taken care of, are in excellent condition and in perfect working order. Shipping out of France - fast delivery and no custom fees for destinations within EU. Earphones will be carefully packed and tracking number will be provided. Over twenty years ago, Westone changed the way music is performed with the introduction of the world’s first universal-fit balanced-armature in-ear musicians’ monitors. Our most popular In-Ear Musicians Monitor, the UM Pro 30 features three, proprietary balanced-armature drivers with a 3-way passive crossover, each driver was developed to increase sonic detail and clarity in a specific part of the frequency range. Designed for performing musicians, the UM Pro 30 has a soundstage that features powerful lows, articulate mid-range, and sparkling crystal-clear highs. With the performance, power, and output for any stage, from a small venue, to the world’s largest arenas, the incredible sound of Westone UM Pro 30 will meet the demands of the most discerning musician and music lover alike. The Westone UM Pro 30 incorporates all the innovations and expertise that Westone has developed in almost 60 years of designing and manufacturing products for the human ear. The compact, low-profile, ergonomic design is comfortable, and can be worn for hours and hours.. Westone’s proprietary silicone and comfort foam ear-tips enhance the performance of our In-Ear Musicians’ Monitors by ensuring a superb fit and by provide superior noise isolation. Ambient sound levels are reduced an average of 25 dB, which makes UM Pro 30 ideal for use onstage or in other noisy environments. The Westone UM Pro 30 was designed by musicians, for musicians, and can be used not only by onstage, but also by music lovers, no matter what type of music they listen to.

For sale a pair of used Westone UM Pro 30 in-ear monitors, with original box and accessories. The earphones are in very good condition and in perfect working order. Earphones will be carefully packed and tracking number will be provided. Over twenty years ago, Westone changed the way music is performed with the introduction of the world’s first universal-fit balanced-armature in-ear musicians’ monitors. Our most popular In-Ear Musicians Monitor, the UM Pro 30 features three, proprietary balanced-armature drivers with a 3-way passive crossover, each driver was developed to increase sonic detail and clarity in a specific part of the frequency range. Designed for performing musicians, the UM Pro 30 has a soundstage that features powerful lows, articulate mid-range, and sparkling crystal-clear highs. With the performance, power, and output for any stage, from a small venue, to the world’s largest arenas, the incredible sound of Westone UM Pro 30 will meet the demands of the most discerning musician and music lover alike. The Westone UM Pro 30 incorporates all the innovations and expertise that Westone has developed in almost 60 years of designing and manufacturing products for the human ear. The compact, low-profile, ergonomic design is comfortable, and can be worn for hours and hours.. Westone’s proprietary silicone and comfort foam ear-tips enhance the performance of our In-Ear Musicians’ Monitors by ensuring a superb fit and by provide superior noise isolation. Ambient sound levels are reduced an average of 25 dB, which makes UM Pro 30 ideal for use onstage or in other noisy environments. The Westone UM Pro 30 was designed by musicians, for musicians, and can be used not only by onstage, but also by music lovers, no matter what type of music they listen to.

For sale a pair of used Westone UM Pro 30 in-ear monitors, with original box and accessories. The earphones are in very good condition and in perfect working order. Earphones will be carefully packed and tracking number will be provided. Over twenty years ago, Westone changed the way music is performed with the introduction of the world’s first universal-fit balanced-armature in-ear musicians’ monitors. Our most popular In-Ear Musicians Monitor, the UM Pro 30 features three, proprietary balanced-armature drivers with a 3-way passive crossover, each driver was developed to increase sonic detail and clarity in a specific part of the frequency range. Designed for performing musicians, the UM Pro 30 has a soundstage that features powerful lows, articulate mid-range, and sparkling crystal-clear highs. With the performance, power, and output for any stage, from a small venue, to the world’s largest arenas, the incredible sound of Westone UM Pro 30 will meet the demands of the most discerning musician and music lover alike. The Westone UM Pro 30 incorporates all the innovations and expertise that Westone has developed in almost 60 years of designing and manufacturing products for the human ear. The compact, low-profile, ergonomic design is comfortable, and can be worn for hours and hours.. Westone’s proprietary silicone and comfort foam ear-tips enhance the performance of our In-Ear Musicians’ Monitors by ensuring a superb fit and by provide superior noise isolation. Ambient sound levels are reduced an average of 25 dB, which makes UM Pro 30 ideal for use onstage or in other noisy environments. The Westone UM Pro 30 was designed by musicians, for musicians, and can be used not only by onstage, but also by music lovers, no matter what type of music they listen to. Note to potential UK buyers January 1st 2021 brought significant changes to the the way cross-border parcels are dealt with. VAT can be levied on goods imported in UK from within EU, depending on their nature, value and country of origin. Disruptions and delays at UK borders are a reality for the time being. Many shipping companies in EU have increased charges at best, at worst they have temporarily stopped accepting parcels with UK as a destination. Should you be interested in buying this item, please contact me first so that I can check and confirm the shipping options.

Yamaha NS-C80 Natural Sound Central speaker 40 Watts RMS @ 6 Ohms - État: comme neuf (condition: Like New) - Système: Home Cinema; Dolby 7.1 - Marque: Yamaha Co. - Alternative name: Nippon Gakki - Vintage: 1993-1996 - Caisse: Bois (wood) - Couleur: Noir (Black) - Type: Acoustic-suspension  type - Magnetic-shielding type (EIAJ) - Speaker Unit: 2x10 cm cone woofer (JA1065); 1x2.5 cm balanced dome tweeter (JA05R4) - Crossover: 6 kHz (6 dB/oct) - Input Terminal: Push-type (filaire+fiche banane) - Nominal Impedance: 6 ohms - Frequency Response (Gamme de Fréquences): 80 Hz – 20 kHz - Nominal Input Power (Puissance RMS): 40W - Music Input Power (Puissance Musicale): 80W - Sensitivity: 90  dB/w/m - Dimensions (WxHxD) (LongueurXHauteurXProfondeur): 445 x 135 x 166 mm (17-1/2” x 5-5/16” x 6-9/16”) - Weight (poids): 3.3 kg (7 lbs. 4 oz) - Fourni avec le carton d'origine, portant le numéro de série. / Including its original box, with the serial number printed on it. Livraison en France en point relais Mondial Relay uniquement. Shipping to Mondial Relay spots (6€) in some European countries only; or delivered at home (10€) in a few available European countries though Mondial Relay partners parcel shipping. Extra fee will be required for other destinations or delivery services.

For sale rare Fiio AM3D THX AAA amplifier module for X7/X7ii players and Q5/Q5s DAC/amplifiers, with original box. The module is in very good condition and works perfectly. Excellent sound. The item will be carefully packed and tracking number will be provided.