Output connectors

The Soundweb London Analog Output BluCard is designed to populate any of the four card slots on Soundweb London BLU-800, BLU-805, BLU-806, BLU-320, BLU-325, BLU-326, BLU-160, BLU-120, BLU-80, BLU-32 and BLU-16 devices. This analog card enables Soundweb London devices to send line level signals. The Analog Output Card has two Combicon connectors which are used as follows: Connector 1 Balanced / Unbalanced Audio, Channel 1 - Mic/Line Balanced / Unbalanced Audio, Channel 2 - Mic/Line Connector 2 Balanced / Unbalanced Audio, Channel 3 - Mic/Line Balanced / Unbalanced Audio, Channel 4 - Mic/Line https://bssaudio.com/en/products/analog-output-card Cette carte provient d’une unité BSS neuve. Carte jamais utilisée. Paiement par par Paypal si envoie, en espèce si retrait sur place. International buyers are always welcome, BUT, PLEASE, ASK FOR A SHIPPING QUOTE BEFORE YOU BID!!!! International shipping costs will be adjusted depending on the destination. From 15€ to 32€ En savoir plus

Professional sound at its best.   The CD 3000 3000W Power Amplifier combines a linear power supply and a Class D output to deliver Crest power in a compact and cost-effective package. The CD 3000 is very versatile, whether powering nightclub systems or touring bands.   A traditional linear power supply is used in the CD Series. Because of the efficiency of the switching output stage, the transformer does not need to be big or heavy. This gives the CD Series an advantage in delivering huge power in a compact package. The efficiency of the output stage also gives the power supply the ability to handle heavy duty cycles without compromising sonic integrity.   Crest Audio's engineering has also maintained sonic quality while incorporating the advantages of a switching output stage. High-power Class-D topology is the key to its efficiency and low operating temperature. An additional advantage is its low power consumption.   Features     Dramatically reduced net weight     Linear power supply / Class D output stages     Very low current draw     Latest generation of high-speed, mosfet output devices     Cooled by variable-speed fan with back-to-front airflow     Inputs: balanced female XLR, 1/4" TRS combi jacks     Outputs: Speakon and five-way binding posts     Mode selector switch for stereo, parallel and bridged-mono operation     Ground-lift switch and rear panel circuit breaker     Recessed, stepped attenuators with removable knobs     16-gauge steel chassis, cast aluminum front panel     TourClass protection circuits     ACL (Active Clip Limiting) prevents speaker damage by providing gentle gain reduction when signal approaches the clipping threshold     IGM (Instantaneous Gain Modulation) monitors speaker loads to detect conditions that may over-stress output devices, allowing safe operation into nominal 2 Ohm speaker loads     AUTORAMP gradually increases gain to the attenuator level-settings when the amplifier is turned on, preventing abrupt turn-on levels     Other protection features include: short circuit, DC voltage, comprehensive thermal management, current in-rush turn-on/off transient and sub/ultrasonic input     Five-year warranty Specifications     Stereo Power 8 Ohms: 800 Watts     Stereo Power 4 Ohms: 1500 Watts     Stereo Power 2 Ohm: 1800 Watts     Bridged Power 8 Ohm: 3000 Watts     Maximum output voltage: 85V rms     Frequency response 1W @ 8 ohms: 20Hz—20khz, +/-1db     Power bw rated power @ 4 ohms, 1% THD+N: 20Hz—20khz, +/-1db     THD + N:     Imd; SMPTE/DIN 4:1 (60 Hz / 7 khz):     Damping factor: 400:1 @ 8 ohms (20 Hz to 100 Hz)     Input CMRR: >60db @ 1khz     Gain / input sensitivity @ 4 ohms: Selectable: x20, x40, or.775 V for full rated output power     Input impedance: >20kohms balanced, >10kohms unbalanced     Hum and noise: > -100db, A-weighted below rated power @ 4 ohms     Crosstalk: > -60db below max rated power (1khz)     Class: D     Power supply: Linear with toroid transformer     Circuit breaker rating (120V/230V): 20A /12A     Current draw (120VAC) 1/8 power, 4 ohms: 7.0A     1/3 power, 4 ohms: 14.0A     At idle: 1.5A     Thermal emissions 1/3 Power, 4 ohms BTU / hr: 1024     Cooling: Back to front via variable speed DC fan     Input connectors: balanced female XLR, 1/4" TRS, unbalanced 1/4" TS on Neutrik combo connectors     Output connectors: Five-way "touch-proof" binding posts and Neutrik Speakon connectors (which presents both outputs on the A Speakon for bi-amplified applications)     Controls: front panel: twin recessed stepped attenuators, power switch     Rear panel: signal ground-lift, mode select, gain select, circuit breaker     LED indicators: signal level (5 element bargraph), protect, active, ACL / IGM     Construction: 16-gauge steel chassis, cast aluminum front panel - optional handles available     Dimensions (W x H x D): 19" x 3.5" x 1

DBX AFS 224 ANTI LARSEN Input 2 total Input Connectors Female XLR ad 1/4" TRS Input Type Electronically bal/unbal RF filtered Input Impedance Bal 40k ohm, unbal 20k ohm Max Input +20dBu CMRR 40dB, typically 55dB @ 1kHz Output 2 total Output Connectors Male XLR and 1/4" TRS Output Type Electronically bal/unbal, RF filtered Output Impedance Balanced 120 ohm, unbalanced 60 ohm Max Output +20dBu A/D Converter dbx Type IV conversion system A/D Dynamic Range 114dB, A-weighted, 112dB unweighted Type IV Dynamic Range 119dB, A-weighted, 22kHz; BW: 117dB, unweighted, 22kHz BW Sample Rate 48kHz D/A Dynamic Range 112dB, A-weighted, 110dB unweighed Dynamic Range 110dB, A-weighted, 107dB unweighted THD+Noise 0.002% typical at +4dBu, 1kHz, 0dB input gain Frequency Response 20Hz - 20kHz, +/-0.5dB Interchannel Crosstalk 80dB typical Operating Voltage 100VAC 50/60Hz; 120VAC 60Hz; 230VAC 50/60Hz Power Consumption 9 W Audio et hifi occasion à vendre à Courcouronnes (91080)

Ampli de puissance Audio Research 150.2 en très bon état esthétique (intérieur et extérieur), ampli révisé pour le transmettre dans de bonnes conditions, fonctionnement parfait, façade irréprochable. 2 X 150 watts en 8 ohms   S'accorde avec préampli, tuner, dac, bloc mono, platine, lecteur, enceintes WELCOME OFFER NO SHIPPING OUTSIDE EUROPE Audio Research 150.2 power amplifier in very good aesthetic condition (interior and exterior), amplifier revised to transmit it in good conditions, perfect functioning, impeccable frontage. 2 X 150 watts into 8 ohms $2,495. Increased to $2,995 on December 1st 2005. POWER OUTPUT 150 watts per channel into 8 ohms, 300 watts per channel into 4 ohms, both channels driven, 1% THD POWER BANDWIDTH (-3dB points) 5Hz to 40 kHz into 8 ohms or 4 ohms FREQUENCY RESPONSE (-3dB points at 1W) 5 Hz to 120 kHz INPUT SENSITIVITY 1.4V RMS for rated output (27 dB Gain) single-ended or balanced INPUT IMPEDANCE 150K ohms single-ended, 300K ohms balanced differential OUTPUT TAPS - OUTPUT REGULATION 0.05 dB 8 ohm load into open circuit OVERALL NEGATIVE FEEDBACK 12dB DAMPING FACTOR 200 DISTORTION - SLEW RATE 15 V/µs. (20% maximum duty cycle) RISE TIME 2.0 µs HUM & NOISE 500 microvolts RMS (96 dB below rated output IHF A-weighted) POWER SUPPLY ENERGY STORAGE 144,000 µF total POWER REQUIREMENTS 100-125VAC 60Hz (200-250VAC 50Hz) 380 watts at rated output (150WPC 8 ohms), 750 watts at 300WPC 4 ohms, 800 watts maximum, 40 watts idle. OTHER Output polarity: Non-inverting from single-ended inputs. Balanced pin 2+ (IEC-268). Output current: 20 amps peak at protective shutdown. 12 VDC trigger and detachable AC power cord. DIMENSIONS 19" (48 cm) W (standard rack panel) x 5 ¼" (13.3 cm) H x 14 ¼" (36.2 cm) D (front panel back). Optional handles extend 1½" (3.8 cm) forward of the ¼" thick front panel. Output connectors extend 0.9" behind rear panel. WEIGHT 30.3 lbs. (13.8 kg) Net; 43.3 lbs. (19.7 kg) Shipping.

Polyvalentes et pratiques d’utilisation pour orchestre live, spectacle, dj, conférence Un son clair, bien fluide et une bonne présence des basses: pas besoin de caisson jusqu’à 600 personnes en intérieur / 500 en extérieur. Spécifications: • Amplificateur digital de 750 W, 500 W pour les basses et 250 W pour les aigus • Pression sonore maxi: 131 db • Pavillon à directivité constante à basse distorsion et ample dispersion 90°x 60° • Woofer de 15" à haute efficacité avec bobine de 87 mm inside/outside • Moteur avec bobine de 64 mm à membrane en titane • Egalisation électronique, alignement de phase, limiteur et circuits de protection • Entrée de ligne à connecteurs combo TRS/XLR, sortie du signal XLR • Deux poignées latérale et une supérieure pour un transport facile • Quatre inserts M1O pour l'accrochage et prédisposition pour installation sur pied d'enceinte LA PAIRE + CABLES ALIMENTATION: 1500 € Chèque de banque ou espèces Livraison possible sur île-de-france Contact: 06 19 01 25 12 sono@sg9.fr ACOUSTICAL SPECIFICATIONS • Frequency Response -3 dB:45 Hz ÷ 20 kHz • Max SPL:131 dB • Horizontal coverage angle:90° • Vertical coverage angle:60° • Compression Driver:2" neo, 2.5" v.c. • Woofer:15" neo, 3.5" v.c. INPUT/OUTPUT SECTION • Input signal:bal / unbal • Input connectors:Combo xlr-jack • Output connectors:xlr • Input sensitivity:0 dBu PROCESSOR SECTION • Crossover frequencies:1200 Hz • Protections:DC / short cir. • Limiter:Fast / rms limiter • Controls:Volume AMPLIFIER SPECIFICATIONS • Total power:750 W • High frequencies:250 W • Low frequencies:500 W • Cooling:Convection • Connections:VDE conncector in CABINET • Cabinet Material:PP composites • Hardware:4xM10 flying p. • Handles:2 paralléles, 1 au dessus • Pole Mount/Cap:Oui • Colour:Noir PHYSICAL SPECIFICATIONS • Height:680 / 26.67 mm/inch • Width:405 / 15.94 mm/inch • Depth:345 / 13.58 mm/inch • Net Weight:17.2 / 37.91 kg/lbs

Denon DN-T625 Le DN-T625 est une combinaison professionnelle de lecteur CD et de lecteur / enregistreur de cassette logé dans un châssis rackable 3U. Les caractéristiques comprennent le contrôle série RS-232C, la lecture de CD-RW, la mémoire de choc, la réduction du bruit Dolby C, le texte CD et la sortie XLR mono à niveau partagé pour l'adaptation du niveau d'entrée aux tables de mixage. Les fonctions du lecteur CD incluent une hauteur variable de ± 12 % de la vitesse de lecture, le mode de répétition A-B, le mode de lecture simple / continue et une fonction de retour arrière. Un bouton de commande rotatif permet un accès rapide aux pistes. La sortie numérique SPDIF est disponible, ainsi que la synchronisation et le contrôle en cascade pour une utilisation avec plusieurs unités DN-T625. L’ajustement numérique des servos pour le lecteur de CD de l'unité a été automatisé de sorte que le réglage optimal soit toujours obtenu pour le type de CD en cours de lecture, compensant les changements survenant dans le capteur au fil des années d'utilisation. Conçu pour les églises, les écoles, les restaurants et une variété d'autres applications de source musicale, le DN-T625 permet aux utilisateurs de créer leurs propres enregistrements d'un disque à une cassette ou de mélanger des sons provenant des deux sources. Lorsqu’il est combiné avec une table de mixage, les sons d'un CD et d'un microphone peuvent être mixés et enregistrés sur la platine cassette. Cette option est parfaite pour la musique de fond personnalisée ou les annonces pré-enregistrées. - Lecteur CD-R / RW professionnel unique avec lecteur / enregistreur de cassettes - Lecteur CD Démarrage instantané et repérage automatique (présélectionnable) - Jeu de mise sous tension Denon DN-T625 Specs Type    Combination CD player and cassette player/recorder Compatible Discs    Red Book CD and CD-R/RW Supported Bit/Sample Rates    16-bit/44.1kHz D to A Converters    8x oversampling digital filter Frequency Response    20Hz to 20kHz (CD section) Dynamic Range    Not specified by manufacturer Signal-to-Noise Ratio    98dB A-weighted (CD section)    70dB, Dolby C on (Cassette Deck) Total Harmonic Distortion (THD)    0.009% or less (CD section) Output Connectors    2 x XLR CD out balanced analog    2 x XLR tape/mix out balanced analog    2 x RCA phono CD out unbalanced analog    2 x RCA phono tape/mix out unbalanced analog    1 x RCA S/PDIF coaxial digital Headphone Connector    Yes Remote Control    Optional (RC-620 wired remote control) RAM Buffer    Yes Dimensions (HxLxP)    13.33 cm x 48.26 cm x 26.21 cm Weight    4kg72 Specialties    Sync and Cascade connectors for use with multiple     DN-T625 units Number of Heads    2 Motor    2 x DC servo Wow and Flutter    0.06% WRMS Speed Adjustment    ±12% or better with center click Lining    2 x XLR balanced analog    2 x RCA phono unbalanced analog FEATURES CD - 99-track programming and random play - ±12 % Variable pitch playback - CD-R/RW playback - Back cue function, single/continuous playback function - CD TEXT - MP3 playback (DN-T645 only) - Instant start playback DECK - Dolby B/C noise reduction system - Dolby HX-Pro headroom extension system (DN-T645 only) - Auto tape selector - Speed control of approximately ±12 % for tape deck - Music search system - Quick auto reverse GENERAL - Serial control port (9P D-sub) - Copy from CD to tape or use independently - Headphones jack with volume control - Relay playback - Cascade playback - Power on playback - XLR input/output SPECS Compatible Discs - Red Book CD and CD-R/RW Supported Bit/Sample Rates - 16-bit/44.1kHz D to

Amplificateur - Tuner Radiola 603 / Platine K7 Radiola N5430 (Philips AH 603 / Philips 603 / Philips N5430) - tres rare ensemble ampli/tuner et lecteur K7.  Specifications Radiola 603 Tuning range: FM, MW, LW Power output: 30 watts per channel into 8Ω (stereo) Frequency response: 20Hz to 20kHz Input sensitivity: 2.5mV (MM), 150mV (DIN), 150mV (line) Output: 120mV (line), 0.25mV (DIN) Speaker load impedance: 8Ω (minimum) Specifications Radiola N5430 - Head Configuration - 2 Head Desiǥn - 4 Track / 2 Channel - Noise Reduction - Dolby-B Noise Reduction - MPX Filter - Connectivity - 2 Mono Microphone Inputs - DIN Input/Output Connector - Headphones - RCA Input/Output Connectors - Operation - Mechanical Transport Control - Memory Stop - Cue / Review - Preamplifier - Output-Level Control - Individual Input Level Controls - Display - 3-Digıt Mechanical Counter - Analog Needle Meters - Transport - Sìngle Capsŧan Transport - Belt Drive (Capsŧan) - Mechanical Tape Loading - Auto Shutoff - Indicators - Peak Indicator - Record - Cassette Back Lighting - Dolby B - Exterior - Front Loading - Orientation Right - Black Finish - General - Stereo - Tape - Chrome Tape Capabılity - Ferro-Chrome Tape Capabılity - Normal Tape Capabılity - Manual Tape Type Selection - Speed - 1⅞ ips - 4.76 cm/s En très bon état marche et esthétique.

The  EMW  VCF  DIODE  is a specially designed 18db/oct. diode array low-pass resonant filter.  It has a unique sound and a distinctive sonic character.  This module  has a  resonance level switch to better adapt to your patch,  input audio mixer with two channels with individual Input level control,  and two modulation inputs with individual input  level control. - Eurorack (3U) form factor - 10 HP width - 2-channel audio mixer with audio level controls - Two Modulation inputs with level control - Two output connectors - Low noise  circuit design - Power consumption: +12V [14mA]  /  -12V [14mA] - Connectors: 3.5mm - Weight 141g - Depth: 50mm

QSC CX168 8-channel Low-Z Professional Amplifier. Used, Tested. Features: 90 watts per channel at 8 ohms and 130 watts per channel at 4 ohms Compact size—only two rack spaces and 14" deep for reduced rack space Channel pairs bridgeable for maximum flexibility Exclusive PowerLight switch-mode power supply technology for high performance and compact size Active inrush limiting eliminates AC inrush current, removing the need for expensive power sequencers Four HD15 DataPorts (one per channel pair) for Q-SYS networked control and monitoring Custom integrated gain control security cover for tamper-proof installations 1-dB recessed detented gain controls for fast and accurate settings Detachable Euro-style input and output connectors DIP switch control for clip limiters, high-pass filters, bridge mono and parallel operation Selectable high-pass filters protect speakers and prevent speaker transformer saturation with minimal effect on program material (33 Hz or 70 Hz) Comprehensive front panel indicators including signal, clip, bridge mono and parallel input LEDs Fully protected—including DC, infrasonic and ultrasonic, thermal overload and short circuit protection High-performance Class AB+B complementary bipolar output circuitry Lightweight—only 21 pounds (9.5 kg) for easier racking and shipping All CX Series amplifiers meet the European Union's, 2006 RoHS directive to restrict the use of hazardous materials used in electronic devices.

DAIWA CN-901 V SWR & Power Meter 140-525MHz 20W/200W. Daiwa CN-901V SWR Meter, 140-525MHz, 20/200W The CN-901 Series is a high quality instrument with unique features wich make tedious measurement of SWR and Power during antenna tests, matching and tuning of transmitters a very easy task. SWT and Power indicators are installed in one meter unit. One scale will indicate Forward Power, another scale Reflected Power and SWR is indicated at the crossing point of the 2 needles. This unique feature makes it possible to read Forward Power, Reflected Power and SWR all at the same time. Specifications: Frequency: 140 - 525 MHz Power Range: 20/200 W Input / Output Impedance: 50 ohms Input / Output Connectors: SO-239

Je vends une carte d'acquisition Blackmagic DeckLink SDI Input and output 10-bit SD/HD SDI video Hardware down conversion of HD video Realtime HD video effects Integrated SD keyer Mac and Windows compatibility Video System NTSC, PAL, HDVideo Formats HD: 1080PsF23.98/24, 1080i50, 1080i59.94, 720p50, 720p59.94SD: 625/25 PAL, 525/29.97 NTSC, 525/23.98 NTSCAudio Formats Television standard sample rate of 48kHz and 24-bitHost Connection PCI Express x1Input and Output Connectors 3x BNC1x RS-232 En savoir plus Collaboration commerciale.

AV-Tool AP-411 Audio Lip Sync Corrector. État : Occasion About AV Toolbox AP-411 The AV Toolbox AP-411 Lip Sync Corrector is a compact device used to correct audio/video timing mismatches that result in the loss of synchronization of the two components of A/V program content. Since this problem is virtually always caused by the program's video component arriving after the audio component, the AP-411 Lip Sync Corrector provides up to 300 milliseconds of delay for the audio component to restore A/V synchronization to the program material. Excellent specifications of >80dB S/N plus AV Toolbox AP-411 Features - Compact and lightweight design - Allows you to delay an audio signal by up to 300ms to restore audio/video sync to program content - Stereo RCA input and output connectors for wide compatibility - Accepts and outputs audio levels up to 2Vrms and supports 48kHz sample rates - Requires only 5VDC of power to operate and an AC adapter is included

Etat Neuf frais de port offert via UPS pour la France. RedNet D16 AES is a 1U 19in rack-mount interface featuring 16 channels of AES/EBU connectivity to and from a Dante audio network, with Ethernet redundancy for maximum network reliability. Perfect for bridging between digital consoles, power amplifiers or any other AES3 equipped audio equipment and a Dante network, RedNet D16 AES has a Sample Rate Convertor (SRC) on each input pair allowing instant operation with any AES3 source. Word Clock and Digital Audio Reference Signal (DARS) connections provide synchronisation with a wide range of hardware, while S/PDIF I/O allows the integration of equipment such as CD or solid state recorders/players. 16 Channel RedNet AES3 Interface for Dante Network AES3 connectivity allows connection of external converters, effects units, mixing consoles or any other AES3 equipped audio equipment to the Dante audio network Dual rear-panel Ethernet connectors (primary and secondary connectors) allow maximum network reliability with seamless switchover to a standby network in the unlikely event of a network failure. The ports can alternatively be used to daisy-chain additional units. SRC allows external equipment to run at any sample rate, irrespective of the sample rate or clocking of the Dante audio network Compact design allows maximum functionality in minimum rack space, with a full 16 channels of I/O in 1U. RedNet D16 AES features the standard trademark red anodised front panel RedNet D16 provides two 8-channel AES59 combined I/O DB25 connections. In addition, a pair of XLR3 connectors duplicates channels 1 & 2 The rear panel XLR input connector can either be used as a DARS input or as a traditional AES3 audio input, replacing channels 1‰ÛÒ2 of the DB25 inputs S/PDIF input and outputs are provided on RCA connectors; ideal for connecting CD players or solid-state recorders. The input replaces channels 3 & 4 in the DB25 connector while the output can be assigned to replicate any adjacent odd/even output pair Word Clock I/O on BNC connectors allows synchronisation of the Dante network to house clock, or syncing external equipment to the Dante network RedNet Control 2 software provides comprehensive remote control capability via a powerful tabbed browser-like graphic user interface, handling up to 600 devices

Bonjour, Nous vendons notre XTA DP224 550€ NET. Utilisé en studio puis à la maison il est en bon état et fonctionnel à 100%. Possibilité de facturation via notre structure, Livraison possible en France (+15€) et Europe (+25€) Testable sur place (Besançon) Annonce disponible sur reverb, audiofanzine, marketplace.   Hello, We sell our XTA DP224 550 € NET. Used in studio and then at home it is in good condition and 100% functional. Possibility of invoicing via our structure, Delivery to France (+ 15 €) and Europe (+ 25 €). Aviable on reverb, audiofanzine, marketplace.   Specifications : Inputs:   2 electronically balanced Impedance:  > 10k ohms. CMRR:  >65dB 50Hz - 10kHz. Outputs:  4  electronically balanced Source Imp:  Frequency Resp.:+ ½dB 20Hz-20kHz Dyn Range:>110dB 20Hz-20k unwtd Distortion: Maximum Delay: 650 mS  Min Step Size:  2.6  µS Input Gain:  +6dB to -40dB in 0.1dB steps Output Gain: +15dB to -40dB in 0.1dB steps and mute Parametric Equalisation : 8 per Input / 5 Sections per Output Filter Gain: +15dB to -30dB in 0.1dB steps.   Freq. Range: 20Hz - 20kHz, 1/36 octave steps. (368 positions) Filter Q / BW: 0.4 to 128 / 2.5 to 0.008 (Sections switched to  shelving response) Low frequency: 20Hz - 1kHz  High frequency: 1kHz - 20kHz Shelf gains:  ±15dB in 0.1dB steps.   High and Lowpass Filters Filters: 1 of each per output. Freq. Range  HPF: 10Hz - 16kHz 1/36 octave steps. Freq. Range LPF:  35Hz - 22kHz 1/36 octave steps. Responses:  Bessel/Butterworth 12-18-24dB/Oct. Linkwitz-Riley 24dB/Oct. Limiters Threshold: +22dBu to -10dBu Attack time: 0.3 to  90 milliseconds Release time: 2/4/8/16/32 x Attack time Display:2x20 character backlit LCD Input meter:  2 x 6 point, -24dB to digital  clip. Output meter:  6 x 6 point, -24dB to +4dB into limit. Connectors Inputs: 3  pin  female XLR Outputs: 3 pin male XLR. MIDI In: 5 pin DIN External: 9 pin DEE connector (RS232) RS485:3 pin  male XLR (out) 3 pin  male XLR (in) Power: 3 pin IEC Power:  60 to 250V  ±15% @ 50/60Hz. Consumption: Weight: 3.5kg. Net  (4.8kg. Shipping) Size: 1.75"(1U) x 19"  x 11.8"  (44 x 482 x 300mm) excluding connectors.

TRANFORMER INCLUDED 16 high-quality 24-bit / 96 kHz AD/DA converters. Supported sample rates: 32, 44.1, 48, 88.2 and 96 kHz. 16 analog inputs and 16 analog outputs. Provided as fully-symmetrical balanced phone jacks. Switchable between -10 dBv and +4 dBu. Two independent ADAT interfaces Dual 8-channel I/Os, 24-bit, fully compatible with all devices which feature this digital interface. S-Mux permits ADAT transfers of 96 kHz audio.Although the ADAT standard does not include sample rates above 48 kHz, the A16 Ultra can transfer audio at 96 kHz using S-Mux mode, in which pairs of ADAT channels are coupled, giving you a total of eight S-Mux channels. Two independent Z-Link interfaces. This CreamWare-proprietary interface format, based upon FireWire technology, offers greater transfer bandwidth than ADAT. With Z-Link, simultaneous transfer of all 16 channels at 24 bits / 96 kHz is possible. Ideal for use with all CreamWare systems that are equipped with Z-Link. BNC Wordclock I/O for synchronization of your complete digital setup. Functions both as master and as slave. VU meters for precise level setting The 16 5-segment level indicators permit convenient, precise setting of signal levels and allow you to keep everything under visual control at all times. Memory function.The A16 Ultra remembers all of its settings when you power it down, so that you can pick up where you left off in your next session. Ultra-compact construction.The A16 Ultra packs concentrated technology into a single-height 19" rack. Expansion options Various expansion options are planned to boost the performance of the converter further. For example: add-in boards which permit the use of S-Mux on all 16 ADAT channels or which render the A16 Ultra a TDIF-1 compatible converter. A USB2 expansion, also in the works, will permit the A16 Ultra to be used as a standalone I/O interface with any computer system equipped with USB2, and will also allow it to be remote-controlled via software, making operation as an analog/digital patchbay. Technical specifications Sample rates: 96 kHz, 88,2 kHz, 48 kHz, 44,1 kHz and 32 kHz (Master) 30 kHz - 100 kHz (Wordclock - Slave) 38 kHz - 50 kHz (ADAT - Slave) Channels:16 inputs and 16 outputs Analog inputs: Balanced phone jacks (6.3 mm) Input sensitivity + 4 dBu (nominal) Maximum input level +20 dBu (0 dBFS) Input impedance 20 kOhm Analog outputs: Balanced phone jacks (6.3 mm) Output level + 4 dBu (nominal) Maximum output level + 20 dBu (0 dBFS) Output impedance 600 Ohm Converter performance Digital - Analog: 24 Bit / 128 x oversampling / 96 kHz Frequency response Dynamic range 110 dBA THD+N 100 dBA typ. Channel separation 105 dB @ 997 Hz typ. Analog - Digital: 24 Bit / 96 kHz Frequency response Dynamic range 100 dBA THD+N 95 dBA typ. Channel separation 102 dB @ 997 Hz typ Digital inputs and outputs ADAT: EIAJ connectors 8 channels, 24 bits, 2 in, 2 out Z-Link: 2 standard 1394 connectors, 8 channels, 24 bits, 96 kHz capable Synchronization Word Clock In: 75 Ohm, BNC Word Clock Out: 75 Ohm, BNC General specifications Supply voltage: 12V AC Power consumption: 25W Dimensions: 44,3*483,0*189,5 mm (1U) Weight: 3 kg

Welcome! For sale is Electro-Voice CPS4.10 apmlifier with 4 channels of each nominal output is 1000W. MSRP: 3200 US$ Amplifier was never used (just tested before i made this listing) and it is 100% operational. See more technical details below. Shipping We will ship to any location worldwide. Please send us message for shipping cost to your location. All customs fees are not included in the international shipping costs. Buyer is responsible for all customs fees.  Please contact us if you have any question regarding this item.  CPS4.10 This four-channel CPS amplifier from Electro-Voice features groundbreaking Class-D technology for maximum amp efficiency and minimized heat dissipation in 19-inch racks. Each channel individually provides transformerless, switchable output characteristics, which enable specific channels to achieve maximum drive. Power into 2 Ohms, 4 Ohms, 70V, or 100V line – no transformers are required. In Hi-Z operation (70V or 100V), a 50 Hz high-pass filter (HPF) provides protection against loudspeaker transformer saturation. Additionally, amplifier channels can be bridged in pairs for double output power. Each contractor-friendly, multi-channel CPS amplifier also features Phoenix-type connectors for inputs and outputs, pre-programmable power-on delay, easy power-on remote via contact closure, and rear level controls. A module slot for the RCM-810 remote control module provides control network functionality, allowing for remote system diagnostics and control via IRIS-Net software. In addition, using the RCM-810’s Variable Load Drive feature can tailor the amplifier’s output power to match every load from 2 Ohms up to 10 Ohms in steps of 0.1 Ohms. Features: - Class-D design for high-efficiency and low heat dissipation - Flexible matching for Low-Z and High-Z applications - Optional remote control via IRS-Net - Four-channel design in 2RU chassis Specifications: - Maximum Midband Output Power (THD=1%, 1kHZ): 4 x 1000W @ 2 ohms 4 x 1000W @ 4 ohms 4 x 1000W @ 70V 4 x 1000W @ 100V - Rated Output Power (THD 4 x 900W @ 2 ohms 4 x 900W @ 4 ohms 4 x 900W @ 70V 4 x 900W @ 100V  - Maximum Bridged Output Power (THD=1%, 1kHz) 2 x 2000W @ 4 ohms 2 x 2000W @ 8 ohms 2 x 2000W @ 140V 2 x 2000W @ 200V - Maximum RMS Voltage Swing (THD=1%, 1kHz, per channel): 100V - Power Bandwidth (THD=1% ref.1kHz, half power @ 4 ohms load): 10Hz-25kHz, 50Hz-25kHz  - Voltage Gain, ref. 1kHz: 32 dB (2ohm/4ohm mode), 33dB (70V mode), 36dB (100V mode)  - THD at rated output power (MBW=80kHz, 1kHz): - IMD-SMPTE, 60Hz, 7kHz: - DIM30, 3.15kHz, 15kHz: - Maximum Input Level: +21dBu - Crosstalk, ref. 1kHz at rated output power: - Frequency Response, ref. 1kHz: 10Hz-30kHz (+/-1dB) - Input Impedance, active balanced: 20k ohms - Damping Factor, 1khz, 8 ohms: >240 - Slew Rate: 28V/us - Output Noise, A-weighted: - Output Stage Topology: Class D - Power Consumption, 1/8 max. output power @ 4 ohms: 840W - Power Requirements: 220-240V, 50-60Hz or 120V, 50-60Hz or 100V, 50-60Hz - Protections: Audio Limiters, Temperature, DC, HF Short Circuit, Peak Current Limiters, Inrush Current Limiters, Turn-on Delay - Cooling: Front-to-rear, continuously variable fans - Ambient Temperature Limits: 40 to 105 deg. F - Safety Class: I - Dimensions (W x H x D): 19" x 34.7" x 16.6" - Weight: 24.6 lbs - Optional Accessories:  2-way internal X-Over cards, 24dB, LR, XHP-5 for 500Hz/XHP-8 for 800Hz RCM-810 IRIS-Net Control & Supervision Module Rear-Rackmount Kit RMK-15

Focusrite Saffire Pro 14, Interface audionumérique FireWire - jamais utilisé.  CD d'installation fournie. 1 x câble Firewire -> Firewire fourni. Fiche technique   Fabricant:Focusrite Modèle:Saffire Pro 14 Série:Saffire Catégorie:Interfaces audionumériques FireWire Fiche créée le:11/08/2010 Microphone Inputs 1-2 Frequency Response: 20Hz - 20kHz +/- 0.2 dB Gain Range: +13dB to +60dB Maximum Headroom +8dBu THD+N: 0.001% (measured at 1kHz with a 20Hz/22kHz bandpass filter) Noise EIN: 124dB analogue to digital (measured at 60dB of gain with 150 Ohm termination (20Hz/22kHz bandpass filter) Input Impedance: 2k Ohm Line Inputs (Inputs 1-2) Frequency Response: 20Hz - 20kHz +/- 0.2dB Gain Range: -10dB to +36dB THD+N: 0.001% (measured with 0dBFS input and 22Hz/22kHz bandpass filter) Noise: -90dBu (22Hz/22kHz bandpass filter) Input Impedance: >10k Ohm Line Inputs 3-4 Frequency Response: 20Hz - 20kHz +/- 0.2 dB Gain Range: Switch-able between +16dBu or -10dBV for 0dBFS (balanced inputs) THD+N: 0.003% (measured at 1kHz with a 20Hz/22kHz bandpass filter) Noise: -100dBu (22Hz/22kHz bandpass filter) Input Impedance: >10k Ohm Instrument Inputs (Inputs 1 and 2) Frequency Response: 20Hz - 20kHz +/- 0.1dB Gain Range: +13dB to +60dB THD+N: 0.004% (measured with 0dBu input and 20Hz/22kHz bandpass filter) Noise: -87dBu (20Hz/22kHz bandpass filter) Analogue Audio Outputs (Outputs 1-4) 4 Electronically Balanced Outputs Maximum Output Level (0dBFS): +10dBu THD+N: 0.001% (0dBFS input, 20Hz/22kHz bandpass filter) Crosstalk (Channel Isolation) Any input to input: > 100dB Any output to output: > 100dB Any input to output: > 100dB DIGITAL PERFORMANCE A/D Dynamic Range > 109dB (A-weighted), all analogue inputs D/A Dynamic Range > 106dB (A-weighted), all analogue outputs Clock Sources: - Internal Clock - Sync to Word Clock on SPDIF Input (RCA) JetPLLTM PLL technology providing superb jitter reduction for class leading converter performance Clock jitter < 250 picoseconds Supported Sample Rates: 44.1kHz, 48kHz, 88.2kHz, 96kHz 8 input channels to computer: Analogue (4), SPDIF (2) and Loop-back (2) 6 physical output channels from computer: Analogue (4), SPDIF (2) 12 DAW output streams Assignable 18 input by 6 output mixer Weight and Dimensions 1.5kg / 3.3lbs 215mm (W) x 45mm (H) x 220mm (D) (8.5 x 1.8 x 8.7 inches) Connectivity Analogue Channel Inputs (Inputs 1-2) 2 Mic XLR Combo (channels 1-2) on front panel 2 Line 1⁄4” TRS (channels 3-4) on rear panel Automatic switching between Mic / Line (channels 1-2) Switching between Line / Instrument Inputs (channels 1-2) via Saffire MixControl Application Switching between +16dBu (low) and -10dBV (high) gain on inputs 3-4 via Saffire MixControl Application Digital Channel Inputs (Inputs 5-6) 44.1 - 96kHz Stereo S/PDIF input on RCA Analogue Audio Outputs (Outputs 1-4) 4 1⁄4” TRS Jacks Output Level control (analogue) for outputs 1 and 2 Stereo Headphones Mix 1 on 1⁄4” TRS (also routed to Outputs 3 & 4) with independent volume control Digital Channel Outputs (Outputs 5-6) 44.1 - 96kHz Stereo S/PDIF Output on RCA Other I/O 1 6-pin FireWire S400 socket 2 Standard 5-pin DIN MIDI connectors: In and Out DC Power Input Connector (for use with supplied universal input power supply) Front Panel Indicators 2 2 segment input meters, Sig (-18) and O/L (0dBFS) “LKD” Locked Indicator “FW” Host Connected Indicator “Power” Indicator Instrument input source selection LED for channels 1 and 2 Phantom Power (48V) switch and LED for inputs 1 and 2

Bang & Olufsen BeoSystem 10 1985. État : "Occasion" 1521 (1985 - Dec 1991) Power output RMS: 2 x 2.5 watts / 4 ohms Power output music: 2 x 4 watts / 4 ohms Bass control at 50 Hz: +/- 10 dB Treble control at 10,000 Hz: +/- 10 dB FM range: 87.5 - 108 MHz Harmonic distortion stereo: AM range: LW 147 - 350 kHz, MW 520 - 1610 kHz Tape recorder / cassette: Wow and flutter DIN: Tape switch: ferro, chrome, metalFrequency range: 60 - 14,000 Hz Signal-to-noise ratio: > 54 dB Microphones: built-in, L and R Power supply: 220 - 240 V Batteries: 6 x 1.5 volts IEC R 20 Power consumption 220 V: max. 9.5 W Battery: FM 170 - 790 mA Rec: 420 - 1000 mA Dimensions W x H x D: 50.5 x 24 x 7cm Weight incl. batteries: 5.2 kg Connections: headphone (casque audio) max. 1.7 V/ 200 ohms  (jack 6,35 mm) Phono Input 3.5 mV--->see photo 3, you can plug on RCA connectors either a second tape or a phono (vous pouvez brancher soit une platine cassette soit une platine tourne-disque) Tape Input 650 mV The power cord is included. Le câble secteur est inclus. Extra speakers ---> as you can see on photo number 3, you can plug 2 external speakers (sur la photo 3, on peut brancher 2 haut-parleurs externes) SOMETHING SPECIFIC ON THAT RADIO, VERY INTERESTING: On photo 6, you can see 3 memories for FM stations: it is impossible to loose those 3 memories cause it's a mechanical system. No needing of battery to keep the stations in memories. For setting each memory, you have a black button to rotate from left to right and you see just below the frequency (red guide) moving from 88 Mhz to 108 Mhz. Then on the top of the Beosystem 10, you will only have to choose between 3 selectors FM1 / FM2 / FM3 (please see photo 3 on the top at the right side). It's fun and simple to use. (PARTICULARITE DE CETTE RADIO, PLUTOT INTERESSANT: sur la photo 6, vous pouvez voir 3 mémoires pour des stations de radio FM: il est impossible de perdre ces mémoires car c'est un système mécanique. Pas besoin de batterie pour garder les 3 stations en mémoire. Pour régler chaque station en mémoire, vous avez un bouton noir à tourner de gauche à droite et vous verrez juste en dessous le guide rouge bouger, c'est la fréquence variant entre 88 et 108 Mhz. Puis sur le haut du Beosystem 10, vous n'aurez qu'à choisir entre les 3 sélecteurs FM1 / FM2 / FM3(voir photo 1 en hau à droite).C'est simple, drôle et efficace). The radio is in good shape, antenna and sound are as new, warm sound with deep bass! But don't trust at all the tape recorder because it eats sometimes tapes. It's better to rather plug a second tape recorder via RCA connectors. La radio est en bon état, antenne et son comme d'origine, chaud et basses très présentes. Mais ne faîtes pas confiance au lecteur de cassettes. Il arrive qu'il dévore les bandes de cassette, Donc brancher plutôt un second lecteur/platine cassette via le connecteur RCA.

Io Express delivers compact, powerful I/O for PC or Mac, laptop or desktop, in the field, in the studio, or wherever your work takes you. Io Express is the perfect Mac or PC interface for anyone who needs a quality portable monitoring and mastering solution when working with Final Cut Pro X, Avid Media Composer/Symphony/Newscutter, Adobe Creative Suite, and more. Rugged and portable, Io Express delivers desktop-level functionality that's powerful enough to deliver in the edit suite, but sturdy and portable enough to handle life in the field. With support for a wide range of analog and digital HD/SD video and audio I/O, and broadcast-quality HD to SD down-conversion, Io Express fits into any workflow with ease. Compatible with PC or Mac, Io Express can be connected via PCIe card or ExpressCard interfaces, offering the flexibility to work on any platform, in the software of your choice. Powerful connectivity Io Express provides a wide variety of formats, frame rates and video/audio sources for the connectivity you need. For digital video, Io Express features HDMI 1.3a I/O plus 3G/HD/SD-SDI I/O. In addition there are connections for Genlock or LTC input and a loop-through output, and component SD/HD analog video output. The high-quality deep color HDMI input and output provides complete color representation when you need it, while allowing you to interface with HDMI camcorders and HD monitors. Io Express also offers support for both 8-channel HDMI and SDI embedded digital audio or 2 channels of unbalanced analog audio via two RCA connectors. For multi-channel audio mastering, the 8-channel SDI embedded 24-bit 48kHz audio provides pristine quality. Software compatibility Io Express gives creative professionals the freedom to work with the software of their choice. Just some of the supported applications include: Mac OSX:  Apple Final Cut Pro X, Avid Media Composer, Adobe Premiere Pro*, Adobe After Effects*, Adobe Photoshop* and more. Windows 7:  Adobe Premiere Pro*, Avid Media Composer, Adobe After Effects*, CineForm New 3D, Adobe Photoshop*, CineForm Neo HD,  Eyeon Fusion 64 bit, Autodesk Combustion *via AJA plug-in Integrated AJA down-conversion Featuring full 10-bit, broadcast-quality HD to SD hardware down-conversion and automatic HD/SD 12-bit component analog output, Io Express offers conversion flexibility all the time -- during ingest or playback. Tech Specs Video Formats ? (HD) 1080i 25, 29.97, 30 ? (HD) 1080PsF 23.98, 24 ? (HD) 1080p 23.98, 24, 25, 29.97, 30 ? (HD) 720p 50, 59.94, 60 ? (SD) 625i 25 ? (SD) 525i 29.97 Video Input ? SD/HD SDI, SMPTE-259/292/296/424, 8 or 10-bit ? Single Link 4:2:2 (1 x BNC) ? HDMI v1.3 Video Output Digital ? SD/HD SDI, SMPTE-259/292/296/424, 8 or 10-bit ? Single Link 4:2:2 (1 x BNC) ? HDMI v1.3 Video Output Analog ? Composite/S-Video (Y/C) (1 x BNC) ? NTSC, NTSCJ, PAL ? Component (3 x BNC) ? HD: YPbPr, RGB ? SD: YPbPr, RGB (component mode) ? SMPTE/EBU N10, Betacam 525 line, Betacam 525J, RGB ? 12-bit D/A, 8 x oversampling ? +/-.2 dB to 5.0 mHz Y frequency response ? +/-.2 dB to 1 mHz C frequency response ?.5% 2T pulse response ? ? ? Audio Input Digital ? 8-Channel, 16- and 24-bit SMPTE-259 SDI embedded audio, 48 kHz sample rate, synchronous ? 8-Channel, 16 and 24-bit HDMI embedded audio, 48 kHz sample rate, synchronous Audio Output Digital ? 8-Channel, 16 and 24-bit SMPTE-259 SDI embedded audio, 48 kHz sample rate, synchronous ? 8-Channel, 16 and 24-bit HDMI embedded audio, 48 kHz sample rate, synchronous Audio Output Analog ? 2-Channel 16- and 24-bit unbalanced audio (via RCA jack) Reference Input or LTC Input ? 1 x BNC assignable to Reference video or LTC input Reference ? Analog Color Black (1V) or Composite Sync (2 or 4V) ? Nonterminating Electrical Interface ? PCI Express x1 ? ExpressCard/34 Machine Control RS-422, Sony 9-pin protocol 9-pin D-connector pinout is as follows: 1 GND 2 RX- 3 TX+ 4 GND 5 No Connection 6 GND 7 RX+ 8 TX- 9 GND Shell GND Size (w x d x h) ? 8.74" x 7.09" x 1.65" (222mm x 180mm x 42mm) Weight ? 1.5 lbs (0.7 kg) Power ? 12-18V, 11-13W Environment ? Safe Operating Temperature: 0 to 40 degrees C (32 to 104 degrees F) ? Safe Storage Temperature (Power OFF): -40 to 60 degrees C (-40 to 140 degrees F) ? Operating Relative Humidity: 10-90% noncondensing ? Operating Altitude:

USED - Some buttons may scratch. All keys working but one key is a little bit lower than the others. Sold with KORG soft case. Keyboard: 37 Natural Touch Action Notes Switches: 7; Bank (2 positions), Octave Up and Down (toggle) timbre, Select (2 positions), ARP ON / OFF, Vocoder On / Off, Write, Output / Shift Buttons: 7; Volume, tempo, selection program (genre and category), real time assignment, pitch and modulation controls PROGRAMS 8-voice polyphony (up to 4 when vocoder is selected) Program: 128 Maximum number of stamps 2 (when using Layer, Split or Multi) Synth 2 oscillator + noise generator Oscillator 1 Waveform SAW, PULSE, TRIANGLE, SINE, FORMANT, NOISE, CFM/DWGS, AUDIO IN WAVEFORM, CROSS, UNISON, VPM modulation Oscillator 2 Waveform SAW, PULSE, TRIANGLE, SINE Modulation RING, SYNC, RING+SYNC Wave shaping WS type DRIVE, DECIMATOR, HARDCLIP, OCT SAW, MULTI TRI, MULTI SIN, SUB OSC SAW, SUB OSC SQU, SUB OSC TRI, SUB OSC SIN, LEVEL BOOST Multi-filter mode Filter 1 -24 dB / oct LPF - 12 dB / oct LPF, HPF, BPF, Thru Filter 2 LPF, HPF, GMP - 16-band vocoder, adjustable level and panning for each band tape, the format changeover function, the Hold Formant function (Velocity-sensitive keyboard, no aftertouch) 37-note keyboard Timbre Effects: 2 Band EQ Master: master effects (17 effects algorithms) Arpeggiator UP, DOWN, ALT1 / 2, random, Trigger (6 types), Arpeggiator function step Programmes 128 programmes (banks A / B x 8 x 8 genres categories) CONNECTIONS AUDIO IN [ONLINE], AUDIO IN [MIC] (With AUDIO IN [MIC / XLR] switch) AUDIO IN [LINE] Maximum input +19 dBu level Input sources impedance8 ohms Connector1 / 4 "jack (unbalanced) AUDIO IN [MIC] Maximum input level-11 dBu The input source impedance7 k-ohms XLR connector (balanced) Output L / MONO, R cylinders Max output level +6 dBu @ 10 k-ohms Output source impedance1 k-ohms A button is lightly pressed but works (see picture) 1/4 phone jack connectors "(unbalanced) HEADPHONE Maximum output level of 36 + 36 dBu @ 33 ohm load Output source impedance10 ohms 1/4" stereo jack connector MIDI IN, OUT USB type B connector 21.89 (W) x 9.09 (D) x 2.87 (H) 4.41 kg.DC9V power supply

3 Câbles  See­tronic SAC3FX Power Twist TR1 Parfait état 3 longueurs disponibles Une prise à chaque extrémité. ·         Logement en PVC stable ·         Dispositif de verrouillage ·         Fiche AC 3 broches (sortie) ·         Pince anti-traction ·         Joint torique entre connecteur et manchon ·         Joint torique entre manchon et écrou arrière jaune ·         Joint à pression entre écrou arrière jaune et câble ·         Capacité de courant jusqu'à 16 A / 250 V 1Câble noir 3 X 2,5 mm longueur 665 mm entre connecteurs 1Câble noir 3 X 2,5 mm longueur 775mm entre connecteurs 1Câble noir 3 X 2,5 mm longueur 790mm entre connecteurs Poids: 200 grammes le câble Prix neuf généralement constaté: 5,40 € la prise Prix ferme non négociable: 8 € chaque câble Les 3 câbles achetés = une prise gratuite ! A retirer sur place à Juvignac. Ou expédition possible à vos frais: 1 câble à 8€  Colissimo : Rajoutez   4,95 € soit  12,95€ livré. 1 câble à 8€ Mondial Relay : Rajoutez 4,55 € soit  12,55€ livré. 2 câbles à 16€ Colissimo : Rajoutez   6,35 € soit  22,35€ livrés. 2 câbles à 16€ Mondial Relay : Rajoutez 4,55 € soit  20,55€ livrés 3 câbles à 24 €+ 1prise Colissimo : Rajoutez  7,25 € soit 31,25 € livré. 3 câbles à 24 €+ 1prise Mondial Relay : Rajoutez 5,35€ soit  29,35€ livré Pour tout renseignement:  Thierry POUGET   3 Seetronic SAC3FX Power Twist TR1 cables Very good condition 3 lengths available One plug at each end. - Stable PVC housing - Locking device - 3-pin AC plug (output) - Anti-pull pliers - O-ring between connector and sleeve - O-ring between sleeve and rear nut yellow - Pressure joint between yellow rear nut and cable - Current capacity up to 16 A / 250 V 1Black cable 3 X 2.5 mm length 665 mm between connectors 1Black cable 3 X 2,5 mm length 775mm between connectors 1Black cable 3 X 2,5 mm length 790mm between connectors Weight: 200 grams per cable New price generally found: 5.40 € per plug Non-negotiable firm price: 8 € each cable The 3 cables purchased = a free plug!   To be picked up on site in Juvignac. Or possible shipping at your expense:   For any information:  Thierry POUGET

8 legendary Class A mic preamps in the same class as the Focusrite ISA and RED ranges. They don't make them like this anymore... This unit is in very good condition - see pictures: front face is pristine with no scratches, only a few usage scratches around the rack ears from installation (marks will be hidden again after mounted onto a rack). It never left the studio. The Octopre provides eight pristine discrete channels of Focusrite Class A mic preamp and compression, OctoPre PLATINUM routes directly to any digital audio workstation via eight standard analogue outputs. Each channel features a revolutionary compressor/limiter circuit, providing a warm-sounding compressor, which morphs into a brick wall limiter to avoid those critical overs, ensuring total control over all eight channels. The mic preamps featured in OctoPre PLATINUM are similar to those featured in the award winning Focusrite Top-Of-The-Range. They are a transistor-based Class A design utilising the same full-bandwidth philosophy as the legendary RED and ISA mic preamps, ensuring detail and clarity without colouration. The first two 'super channels' also feature phase reverse, as well as TRS jack inputs on the front fascia for quick and easy, DI-free instrument plug-in. Eight line level balanced (+4 dBu) analogue inputs and outputs are provided as standard via 25-pin D-type connectors. These D-type connectors may be routed to 8 XLR/TRS by means of an (optional) 8-way 25-pin D-type to 8 XLR/TRS breakout cable, available separately. In addition to the analogue outputs, the OctoPre can be fitted with digital output (OPTIONAL CARD). Detailed description from the focusrite website: The OctoPre is an eight channel Class A microphone preamplifier, featuring a classic Focusrite mic pre and a revolutionary compressor/limiter circuit on each channel. The mic pres featured in the OctoPre are similar to those featured elsewhere in the award winning Focusrite Platinum range. They are a transistor-based Class A design utilising the same full bandwidth philosophy as the legendary Focusrite Red and ISA mic pres, ensuring detail and organic clarity without obvious colouration. The revolutionary compressor/limiter circuit provides each channel with warmsounding compression, which morphs into brick wall limiting to avoid critical ‘overs’ when recording digitally. The first two channels also feature phase reverse, as well as unbalanced 1/4” jack inputs on the front fascia for quick and easy, DI-free plug-in of guitars and basses. With Class A Focusrite analogue signal processing and comprehensive A/D interface options, OctoPre is the perfect partner for a Pro Tools™ system or any other digital audio workstation, making high quality, multi-channel recording easy. Equally, it could be utilised as part of a compact multi-channel location recording solution (with a laptop or ADAT™, for example), or as an additional set of professional-quality mic pres for any analogue or digital console or hard disk recorder. The original OctoPre is a typical Class A Platinum design, (based around a 737 Rhom transistor) and it is solid state, it has extended bandwidth (up to at least 180kHz at the top end) and sounds transparent. The original OctoPre has an edge in being more forgiving if you want to slam the pre's hard (but more 2nd order harmonic distortion as a result). -The Octopre has a dynamics (compressor/limiter) control on each channel -The Octopre has 48V phantom power switches on each channel -The Octopre has line in and out connections on 25 pin D-sub connectors and 8 XLR inputs for mics Performance specifications: THD:0.001% @ 20dBu input, mic and line at 0dB gain Noise:-96 dB at unity gain through the unit Mic EIN:-128 dBu @ 6dB of gain with 150Ω termination impedance Frequency response:-1 dB at 10 Hz to 200 kHz Carefully packed with powercord. Shipping France: 27,80 € Shipping Europe: 36,30 €

BIAMP SYSTEMS 301 The 301 is a single rack space, three input mic/line mixer. Each input channel uses a differentially balanced, discrete transistor mic/line preamplifier for low noise and low distortion performance. Inputs are provided to accept signals from microphones and/or line level devices. Special features, including limiters and remote level control, make the 301 extremely versatile. 301 mixers are dependable, easy to install, simple to operate, and are covered by Biamp Systems’ five-year warranty. Features: - three electronic balanced mic/line input channels - 30db rear panel Pad switch on each input channel - 40dB screwdriver-adjust Trim on each input channel - +10dB Peak LED indicator on each input channel - rotary level control on each input channel - auto-muting of one channel for “talk-over” applications - +24 volt Phantom Power assign switch on each input - electronic balanced main output with rotary level control - remote control of mail level from up to 2000 feet away - main patch insert point for external processing devices - main stacking input accepts signals from other mixers - screwdriver-adjust tone controls & limiter on main output - -20dB Signal Present LED indicator for main output - all input/output/control on plug-in barrier strip connectors - RoHS compliance and AES grounding practices - CE marked and UL listed power source - !! N'hésitez pas à nous contacter pour plus de renseignement ou pour toute question. Faites nous une offre !! Visiter notre boutique et n'oubliez pas de nous ajouter a vos favoris !

Le MPX 1 est le processeur «multi-effets». Une technologie multiprocesseur FX combinée à un panneau avant interactif. Une complète connectique à l'arrière professionnelle - Détail des caractéristiques: Analog Audio Input XLR and 1/4" balanced (T/R/S)Input Level -2dBu to +20dBu, balanced; -14dBu to +8dBu, unbalanced Input Impedance 100k½, balanced;50k½, unbalanced Analog Audio Output XLR and 1/4"balanced (T/R/S) Output Level +18dBu Output Impedance 600½unbalanced Digital Audio Input Coaxial RCA Format 24-bit S/PDIF Sample Rate 44.1kHz Digital Audio Output Coaxial RCA Format 24-bit S/PDIF Sample Rate 44.1kHz Conversion 24-bit A/D;24-bit D/A Internal Audio DSP 20-bit;32-bit Frequency Response 20Hz - 20kHz ±1dB Crosstalk -60dB THD 0.01%, 20Hz - 20kHz Dynamic Range D/A:>95dB typical, 20Hz - 20kHz, unweighted A/D:>90dB typical, 20Hz - 20kHz, unweighted A/A:>95dB typical, 20Hz - 20kHz, unweighted MIDI Interface 7-pin DIN connector for MIDI IN and powered bidirectional remote; 5-pin DIN connectors for MIDI THRU and OUT Footswitch 1/4"T/R/S connector for bypass and tap Footpedal 1/4"T/R/S connector (10k½- 100k½impedance) Power Requirements 100 - 240 volts AC, 50 - 60Hz, 25 watts (3-pin IEC connector) Remote Power In 2.5 mm 9 volts AC (not included) Dimensions 19" W x 1.75" H (1U) x 9" D (483 x 45 x 289 mm), rack mount standard Weight 6.125 lbs.(2.8 kg) Operating Temperature 32¡to 104¡F (0¡to 40¡C) Maximum Humidity 95% without condensation

BIAMP SYSTEMS 301 Envois gratuit mondial relay The 301 is a single rack space, three input mic/line mixer. Each input channel uses a differentially balanced, discrete transistor mic/line preamplifier for low noise and low distortion performance. Inputs are provided to accept signals from microphones and/or line level devices. Special features, including limiters and remote level control, make the 301 extremely versatile. 301 mixers are dependable, easy to install, simple to operate, and are covered by Biamp Systems’ five-year warranty. Features: three electronic balanced mic/line input channels 30db rear panel Pad switch on each input channel 40dB screwdriver-adjust Trim on each input channel +10dB Peak LED indicator on each input channel rotary level control on each input channel auto-muting of one channel for “talk-over” applications +24 volt Phantom Power assign switch on each input electronic balanced main output with rotary level control remote control of mail level from up to 2000 feet away main patch insert point for external processing devices main stacking input accepts signals from other mixers screwdriver-adjust tone controls & limiter on main output -20dB Signal Present LED indicator for main output all input/output/control on plug-in barrier strip connectors RoHS compliance and AES grounding practices CE marked and UL listed power source !!Avec alimentation!! !! N'hésitez pas à nous contacter pour plus de renseignement ou pour toute question. Faites nous une offre !!

Le processeur multi-image à deux fenêtres MGP 462 combine l'incrustation d'images et un scaling très performant permettant l'affichage simultané de deux sources vidéo ou vidéo-informatiques pour la compatibilité avec les projecteurs vidéoinformatiques haute-résolution ou HDTV. Le MGP 462 convient tout particulièrement aux salles de contrôle, aux systèmes de vidéoconférence, aux salles de conférence, salles de classe, pour la formation à distance ainsi qu'aux prestations scéniques. Caractéristiques - Regroupe des sources d'entrée vidéo, HDTV et RVB haute résolution dans deux fenêtres sur un seul écran - Sortie RVB et vidéo composante HDTV - 46 résolutions de sortie sélectionnables de 640x480 à 1400x1050 dont HDTV 720p/60 - La fonction Graphic still store permet d'utiliser en arrière-plan, des captures d'écran ou des images téléchargées - Transition entre les fenêtres par fondu, volets et cut - Auto-Image™ - Détection pulldown PAL 2:2 et NTSC 3:2 - Mires internes pour l'installation et le calibrage - Insertion de texte pour l'identification des fenêtres - 25 presets de configurations de fenêtre PIP en mémoire - Commande et contrôle IP Link® - Port de contrôle série RS-232 et RS-422 Video input Number/signal type 4 RGBHV, RGBS, RGsB, RGBcvS, component video, S-video, composite video 1 component video (interlaced), S-video, composite video S-video, composite video Connectors 4 x 5 female BNC for RGB, component video, S-video, composite video 1 x 3 female BNC for component video, S-video, composite video 1 female BNC for composite video 1 female 4-pin mini DIN for S-video Nominal level 1 Vp-p for Y of component video and S-video, and for composite video 0.7 Vp-p for RGB and for R-Y and B-Y of component video 0.3 Vp-p for C of S-video Minimum/maximum levels Analog: 0 V to 2.0 Vp-p with no offset Impedance 75 ohms Horizontal frequency 15 kHz to 100 kHz Vertical frequency 50 Hz to 120 Hz Resolution range 640 x 480 to 1400 x 1050, 480p, 576p, and 720p, digitized pixel for pixel; higher resolutions are undersampled Return loss b' 0.7 Vp-p for RGB and for R-Y and B-Y of component video Minimum/maximum levels 0 V to 1.0 Vp-p Impedance 75 ohms Vertical frequencies 50 Hz, 60 Hz, 72 Hz, 96 Hz, 100 Hz, 120 Hz Scaled resolution 640x4801,2,3,4,5,6, 800x6001, 2,3,4,5,6, 852x4801,2,3,4,5, 1024x7681,2,3,4, 1024x8521,2,3,4, 1024x10241,2,3, 1280x7682, 1280x10241,2, 1360x7652, 1365x7682, 1365x10242, 1366x7682, 1400 x 10501,2, 1600 x 12001,2 HDTV: 480p2, 576p1,5, 720p1,2, 1080i1,2, and 1080p1,2 1 = at 50 Hz, 2 = at 60 Hz, 3 = at 72 Hz, 4 = at 96 Hz, 5 = 100 Hz, 6 = 120 Hz NOTE For the output resolutions listed below, the total pixel and active pixel values are reduced. The sync timings and line widths are correct, and most displays will recognize the rate correctly. 1600x1200: 1180 active pixels 1080i: 1440 active pixels 1080p: 1440 active pixels Sync Input type RGBHV, RGBS, RGsB, RGBcvS, bi-level or tri-level component video Output type RGBHV, RGBS, RGsB Tri-level or bi-level on Y channel of component video Input standards NTSC 3.58, NTSC 4.43, PAL, SECAM Input level 2.75 V to 5.0 Vp-p for RGBHV or RGBS 0.6 Vp-p for component video tri-level sync 0.3 Vp-p for component video bi-level sync or RGsB Output level TTL: 5.0 Vp-p, unterminated for RGBHV, RGBS, RGsB 0.6 Vp-p for component video (tri-level sync) Input impedance 510 ohms Output impedance 75 ohms Max. input voltage 5.0 Vp-p Polarity Positive or negative (selectable)Control/remote — processor/decoder/scaler Serial control port RS-232 or RS-422, 9-pin female D connector Baud rate and protocol En savoir plus

In mint condition. Fast and secure shipping. Tonelux OTB16. Stereo summing with Tonelux discrete summing amps! The OTB16 is a 16 channel 1U mixer with 16 balanced inputs and a Tonelux discrete summing bus. Each channel has a level control and a panner The access to the OTB16 is through 2 eight channel Dsub inputs at a level of +4dBu nominal. The summing of the 16 channels is through the famous Tonelux TX-240 and TX-260 discrete op-amps, and then throught the main output transformer, which can be adjusted by the MASTER fader pot, which comes out of a pair of XLR connectors. Additionally there is a monitor fader output for monitoring or for expansion, which is balanced but transformerless, and 2 additional balanced inputs to the MIX bus. The pre fader monitor output can be plugged into the BUS input to extend the number of channels with a second or third OTB16. 120 or 130 volts AC powered 50/60 Hz.

STORE NEW ARRIVALS ADD TO FAVORITE VIEW FEEDBACK CONTACT HB-Digital Octo LNB LNC 8 Devices Direct Full HD TV 3D + Gold Plated Contacts + Weather Protection (Can Pull Out) in Set with 8 F Connectors Gold Plated Free by Description Octo LNB LNC 8 Devices Direct Full HD TV 3D + Gold Plated Contacts + Weather Protection (Can Pull Out) in HB Digital Set With 8 F Connectors Gold Plated Free Taille: Octo  |  Couleur: Weiß Type ID HD 808, Oscillator Low- / High Band (GHz): 9.75 / 10.60, Output frequency range (MHz): 950-2150, Oscillator stability (MHz):? A PROPOS DE NOUS Nous offrons les meilleurs prix sur des produits de haute qualité. Notre boutique en ligne comprend de nombreux articles tels que des livres, des films, de la musique et des jeux, ainsi que des produits électroniques, des jouets, des vêtements de sport, des vêtements, des outils, des articles ménagers, des articles de jardinage, etc. TRANSPORT Nous travaillons toujours pour que votre colis arrive le plus rapidement possible. Veuillez comprendre que certains facteurs tels que les conditions météorologiques, le trafic postal élevé et les performances des sociétés de transport sont indépendants de notre volonté. Nous offrons la livraison gratuite dans tout le pays et l'expédition sous 1 à 2 jours ouvrables après le paiement. Nous n'acceptons pas les boîtes postales et les boîtes aux lettres. Veuillez fournir une adresse physique. RETOURS Nous proposons une politique de retour de 30 jours pour les articles qui ne vous satisfont pas complètement. Vous avez la possibilité d'un remboursement complet ou d'un échange de l'article. SATISFACTION CLIENT Nous faisons de notre mieux pour nous assurer que chaque client est complètement satisfait. S'il y a un problème, envoyez-nous un message! Nous sommes heureux d'aider. NOUS ACCEPTONS

TRES BON ETAT. Livraison rapide et soignée. Avec housse Maximum Polyphony: 128 voices 16 parts Wave Memory: 64Mb (16 bits Linear Equivalent) Preset Memory Patches: 1082 + 256 (GM2) Rhythm Sets: 20 + 9 (GM2) Performances: 64 User Memory Patches: 128 Rhythm Sets: 8 Performances: 64 Favorites: 100 Effects Multi-Effects: 3 systems, 79 types - Chorus: 3 types - Reverb: 5 types - Mic Input Reverb: 8 types - SMF/AUDIO FILE PLAYER SECTION File Format Standard MIDI File: Format 0 or 1 Audio File: WAV, AIFF, MP3 Rhythm Pattern Preset: 24 groups x 6 Arpeggiator Preset: 128 Chord Memory Preset: 17 - Controllers D Beam Controller Bend/Modulation Lever Sound Modify Knob x 5 - External Storage Device: USB Memory (supports USB 2.0 Hi-Speed Flash Memory) - Connectors Output Jacks (L/MONO, R): 1/4 Inch Phone Type - Headphone Jack: Stereo 1/4 inch phone type - Mic Input Jack: 1/4 Inch Phone Type - EXT INPUT Jack: Stereo miniature phone type - Hold Pedal Jack - MIDI Connectors (IN, OUT) - USB COMPUTER Connector (supports USB MIDI)

VENDS AMPLI TUNER MARANTZ 2250 B + SON TRANSFORMATEUR 110 V/220 VOLTS AMPLI MARANTZ 2250 B AVEC TOUTES SES FONCTIONS EN PARFAIT ÉTAT DE MARCHE. TOUS LES ÉCLAIRAGES FONCTIONNENT. CET AMPLI MARANTZ EST UN AMPLI AMÉRICAIN QUI EST EN 110 VOLTS, CELUI CI MARCHE TRÈS BIEN AVEC UN TRANSFORMATEUR 220 VOLTS QUI EST COMPRIS DANS VOTRE ACHAT (TRANSFO DE QUALITÉ VOIR PHOTOS). CET AMPLI D'OCCASION COMPORTE QUELQUES TRACES D'USURES D'USAGES. ENVOI DE L'AMPLI PAR LA POSTE EN COLISSIMO RECOMMANDÉ. (COMPRIS DANS LE PRIX D'ACHAT) ENVOI SOIGNÉ AVEC PAPIER BULLES, POLYSTYRENE ET CARTON RENFORCÉ L'AMPLI AVEC SON EMBALLAGE PÈSE  25 KG. BON ACHAT A TOUS VOIR DESCRIPTIF COMPLET DU CONSTRUCTEUR CI DESSOUS: Général: Designed in USA Manufactured In Japan First Year 1976 Last Year 1977 Blue Face Yes Channels Two Speaker Connections two sets Amplifier: RMS Power Per Channel 50 Impedance 8 ohms Total Harmonic Distortion (THD).25 % Power Bandwidth 20 Hz to 20 KHz Frequency Response 20 Hz to 20 KHz +/- 0.5 % Intermodulation Distortion (IM).25% at rated power Input Impedance 30 k ohm Input Sensitivity for Full Output 1.5v FM Tuner AM Tuner: Gyro Tuning yes RF Sensitivity 1.9 uV 300 Ohm Binding Posts Spring connectors 75 Ohm Binding Posts Spring connectors Signal Strength Meter Yes Center Tuning Meter Yes Stereo Lamp Yes Dolby Lamp Yes Illuminated Dial Pointer Yes Amplifier: Multiple Bass Adjustments Yes Multiple Midrange Adjustments Yes Multiple Treble Adjustments Yes Tone Control Defeat Yes Bass Turnover Options Yes Treble Turnover Options Yes High Filter Yes Low Filter Yes Gain Control Yes Loudness Contour Yes Mono Yes Balance Slider Number of Tape Monitors Two Tape to Tape Dubbing Via front panel Auxillary Input Source Yes Phono Input Source Yes Illuminated Source Indicators Yes Cartridge Load 47 k ohm Tuner Source Input am, fm Source Tape Input (as opposed to a tape monitor) yes 2nd Source Tape input (as opposed to a tape monitor) yes Tape Monitor yes 2nd Tape monitor yes Preamp to Amplifier Jumper(s) yes Headphone Jack(s) Yes Speaker Selection Nomenclature main, remote