Potentiometer for

MANY PARTS AVAILABLE IN OUR STORE AND MANY OTHER AVAILABLE. PLEASE CONTACT US IF YOU DO NOT FIND WHAT YOU ARE LOOKING FOR! POTENTIOMETRE 4.7KHOM WITH PULL SWITCH + LOG POUR STUDER A900 A90X... NEUF! Absolument neuf. Pièce d'origine. Brand new. Genuine part. Please ask for shipping cost. Livraison: nous effectuons les livraisons groupées. Prévoir 3,50€ pour les petits objets en lettre max (maxi 2cms d'épaisseur). Colissimo recommandé jusqu'à 1kg: 7,10€. Shipping: we combine shipping. 17€ up to 1 kilo for delivery in EEC. Questions in English are welcome.  A paypal account is required for buyers outside of France.  All international deliveries are made through the international French post, unless otherwise specified.  International bidders please ask for a shipping quote before bidding. Livraison et expédition:   Sauf mention contraire, toutes nos livraisons sont effectuées par la poste en colissimo ou colissimo recommandé pour le national.   Nous vous conseillons vivement d’ouvrir vos paquets en présence du facteur.   Refusez un colis dont l'emballage est visiblement très endommagé. Si le colis est accepté alors qu'il est endommagé l'assurance ne pourra pas fonctionnée et couvrir la détérioration.   Evaluations  : Notre priorité est votre satisfaction. Nous mettons tout en œuvre pour la garantir. Si toutefois un problème devait se poser, et a vant de nous attribuer une mauvaise évaluation, contactez nous afin de trouver ensemble une solution.     Les règlements doivent se faire dans les 5 jours suivant la fin de l’enchère.   Merci de votre compréhension,   Crossroads Express)

MANY PARTS AVAILABLE IN OUR STORE AND MANY OTHER AVAILABLE. PLEASE CONTACT US IF YOU DO NOT FIND WHAT YOU ARE LOOKING FOR! POTENTIOMETRE 3 X 10K + LOG POUR STUDER A980 TEILE NEUF! Absolument neuf. Pièce d'origine. Brand new. Genuine part. Please ask for shipping cost. Livraison: nous effectuons les livraisons groupées. Prévoir 3,50€ pour les petits objets en lettre max (maxi 2cms d'épaisseur). Colissimo recommandé jusqu'à 1kg: 6,50€. Shipping: we combine shipping. 17€ up to 1 kilo for delivery in EEC. Questions in English are welcome.  A paypal account is required for buyers outside of France.  All international deliveries are made through the international French post, unless otherwise specified.  International bidders please ask for a shipping quote before bidding. Livraison et expédition:   Sauf mention contraire, toutes nos livraisons sont effectuées par la poste en colissimo ou colissimo recommandé pour le national.   Nous vous conseillons vivement d’ouvrir vos paquets en présence du facteur.   Refusez un colis dont l'emballage est visiblement très endommagé. Si le colis est accepté alors qu'il est endommagé l'assurance ne pourra pas fonctionnée et couvrir la détérioration.   Evaluations  : Notre priorité est votre satisfaction. Nous mettons tout en œuvre pour la garantir. Si toutefois un problème devait se poser, et a vant de nous attribuer une mauvaise évaluation, contactez nous afin de trouver ensemble une solution.     Les règlements doivent se faire dans les 5 jours suivant la fin de l’enchère.   Merci de votre compréhension,   Crossroads Express)

Accessoire Instruments Code EAN: 0703676283899 En-tête / Fabricant: Gazechimp Titre: 100Pieces Audio B25K Ohm Audio Pots Potentiometer For Electric Guitars Bass Tranche de poids: 500 g à 3 kg Instrument / Type: Accessoire

MANY PARTS AVAILABLE IN OUR STORE AND MANY OTHER AVAILABLE. PLEASE CONTACT US IF YOU DO NOT FIND WHAT YOU ARE LOOKING FOR! POTENTIOMETRE POUR MONITOR POUR STUDER A779 A916 & C279 NEUF! Absolument neuf. Pièce d'origine. Pas de prix de réserve! Bonnes enchères... Brand new. Genuine part. Please ask for shipping cost. We combine shipping.No reserve price! Happy bidding... Livraison: nous effectuons les livraisons groupées. Prévoir 3,50€ pour les petits objets en lettre max (maxi 2cms d'épaisseur). Colissimo recommandé jusqu'à 1kg: 6,50€. Shipping: we combine shipping. 17€ up to 1 kilo for delivery in EEC. Questions in English are welcome.  A paypal account is required for buyers outside of France.  All international deliveries are made through the international French post, unless otherwise specified.  International bidders please ask for a shipping quote before bidding. Livraison et expédition:   Sauf mention contraire, toutes nos livraisons sont effectuées par la poste en colissimo ou colissimo recommandé pour le national.  Nous vous conseillons vivement d’ouvrir vos paquets en présence du facteur.  Refusez un colis dont l'emballage est visiblement très endommagé. Si le colis est accepté alors qu'il est endommagé l'assurance ne pourra pas fonctionnée et couvrir la détérioration.   Evaluations : Notre priorité est votre satisfaction. Nous mettons tout en œuvre pour la garantir. Si toutefois un problème devait se poser, et avant de nous attribuer une mauvaise évaluation, contactez nous afin de trouver ensemble une solution.    Les règlements doivent se faire dans les 5 jours suivant la fin de l’enchère.  Merci de votre compréhension,  Crossroads Express

MANY PARTS AVAILABLE IN OUR STORE AND MANY OTHER AVAILABLE. PLEASE CONTACT US IF YOU DO NOT FIND WHAT YOU ARE LOOKING FOR! POTENTIOMETRE AVEC PULL SWITCH POUR A827 & CONSOLE STUDER A928 962 963 902 903... NEUF! Absolument neuf. Pièce d'origine. Brand new. Genuine part. Please ask for shipping cost. Livraison: nous effectuons les livraisons groupées. Prévoir 3,50€ pour les petits objets en lettre max (maxi 2cms d'épaisseur). Colissimo recommandé jusqu'à 1kg: 7,10€. Shipping: we combine shipping. 17€ up to 1 kilo for delivery in EEC. Questions in English are welcome.  A paypal account is required for buyers outside of France.  All international deliveries are made through the international French post, unless otherwise specified.  International bidders please ask for a shipping quote before bidding. Livraison et expédition:   Sauf mention contraire, toutes nos livraisons sont effectuées par la poste en colissimo ou colissimo recommandé pour le national.  Nous vous conseillons vivement d’ouvrir vos paquets en présence du facteur.  Refusez un colis dont l'emballage est visiblement très endommagé. Si le colis est accepté alors qu'il est endommagé l'assurance ne pourra pas fonctionnée et couvrir la détérioration.   Evaluations : Notre priorité est votre satisfaction. Nous mettons tout en œuvre pour la garantir. Si toutefois un problème devait se poser, et avant de nous attribuer une mauvaise évaluation, contactez nous afin de trouver ensemble une solution.    Les règlements doivent se faire dans les 5 jours suivant la fin de l’enchère.  Merci de votre compréhension,  Crossroads Express

MANY PARTS AVAILABLE IN OUR STORE AND MANY OTHER AVAILABLE. PLEASE CONTACT US IF YOU DO NOT FIND WHAT YOU ARE LOOKING FOR! POTENTIOMETRE AVEC SWITCH POUR CONSOLE STUDER A928 962 963 902 903... NEUF! Absolument neuf. Pièce d'origine. Brand new. Genuine part. Please ask for shipping cost. Livraison: nous effectuons les livraisons groupées. Prévoir 3,50€ pour les petits objets en lettre max (maxi 2cms d'épaisseur). Colissimo recommandé jusqu'à 1kg: 7,10€. Shipping: we combine shipping. 17€ up to 1 kilo for delivery in EEC. Questions in English are welcome.  A paypal account is required for buyers outside of France.  All international deliveries are made through the international French post, unless otherwise specified.  International bidders please ask for a shipping quote before bidding. Livraison et expédition:   Sauf mention contraire, toutes nos livraisons sont effectuées par la poste en colissimo ou colissimo recommandé pour le national.  Nous vous conseillons vivement d’ouvrir vos paquets en présence du facteur.  Refusez un colis dont l'emballage est visiblement très endommagé. Si le colis est accepté alors qu'il est endommagé l'assurance ne pourra pas fonctionnée et couvrir la détérioration.   Evaluations : Notre priorité est votre satisfaction. Nous mettons tout en œuvre pour la garantir. Si toutefois un problème devait se poser, et avant de nous attribuer une mauvaise évaluation, contactez nous afin de trouver ensemble une solution.    Les règlements doivent se faire dans les 5 jours suivant la fin de l’enchère.  Merci de votre compréhension,  Crossroads Express

Potentiomètre pour Marantz SD 1015 Potentiometer for Marantz référence:  114F-20KA Bon état / nice condition A l'origine sur platine K7 Marantz SD 1015 Envoi en Mondial Relay

Combo FiiO Ampli E09K + DAC E17 The QOGIR serves as a dock for the E17 USB DAC-AMP devices. When combined, the QOGIR and E17 become seamless high fidelity audio interface for any computer, bypassing noisy internal sound cards. With both a fixed and a volume controlled line level output, the QOGIR works well as a pre-amp. As a successor to the E9, the QOGIR has the following improvements: - Synchronized power on/off with FiiO E17 - Switch-selectable dock or AUX-in playback - Full size RCA connectors for all rear input/outputs Features - TI TPA6120 current feedback power amp with low noise, distortion and high switching rate - Soft on/off with sealed relay protects power amplifier output - Smooth and low noise ALPS sealed potentiometer for volume control - Audio buffers using ultra-low distortion and low noise OPA2134 op amps - Dock connector for E17 USB DAC-AMP - Standard 10dB and 18dB High Gain - Volume controlled and fixed level RCA outputs Specifications - Power: 900mW (32Ω); 150mW (300Ω) - Impedance Range:16 ~ 600Ω - SNR: >100dB (A weight) - Distortion: - Frequency Response: 20Hz~20KHz - Line Out: 2V rms - Pre Out: 0~6V rms - Power: DC15V/ 1.5A - Size: 149 × 96 × 56mm - Weight: 440g

SANSUI AU 517  AUDIOPHILE VINTAGE PREAMPLIFIER AMPLIFIER  VERY GOOD CONDITION     NEAR NEW  FULL WORKING CERTIFIED   IN 110/220/240V  REVIEWED      BIAS/ OFFSET BUT IN ORIGINAL CONDITION  POTENTIOMETERS CLEANED   NO NOISES   NO SCHRATCHES  EXCELLENT PHONO ENTER FOR TURNTABLE  DOUBLE POWER SUPPLY SHIPPING COST FOR E.U    (HEAVY ENOUGH )   NO PAYPAL Description The AU-517 with it's DC power amp boats highly accurate reproduction of all signals (including any kind of musical signal), and it achieves exceptionally high circuit stability. The pre-driver circuitry is so effective in assuring stable performance in the face of temperature and voltage changes that Sansui has registered it with major patent offices around the world. The subsonic filter attenuates harmful frequencies from 16Hz and below on a 6dB / octave slope, yet keeps musical content intact. The potentiometer for master volume control is a precision attenuator type with 32 accurately calibrated steps marked in decibels (dB). By a simple calculation you know how much average power you are feeding your speakers. The AU-517 has full monitoring/recording/dubbing facilities for two stereo tape decks. All play/copy operations can be handled by a trio of switches and a rotary knob, permitting a number of practical uses. Specifications Power output: 65 watts per channel into 8Ω (stereo) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.025% Damping factor: 60 Input sensitivity: 2.5mV (MM), 150mV (line) Signal to noise ratio: 78dB (MM), 100dB (line) Channel separation: 60dB (MM), 65dB (line) Output: 150mV (line), 1V (Pre out) Speaker load impedance: 8Ω (minimum) Dimensions: 430 x 168 x 389mm Weight: 16.5kg

Potentiomètre à glissière réglage de la balance pour amplificateur Marantz PM 420 Balance slide Potentiometer for Marantz M 420 amplifier références:  RX02040020 Envoi en Mondial Relay Belgique Luxembourg Pays-Bas Espagne allemagne

For sale Oppo HA-1 DAC & headphone amplifier. The amplifier has been very well taken care of (still has the original screen protection film) and is in very good condition (minor imperfection in the upper right corner next to potentiometer - hardly visible, check pics). Exquisite build and fantastic quality. Included:  - Oppo HA-1 DAC & headphone amplifier  - Remote control  - Power cord (EU)  - USB cable  - SPDIF coaxial cable The item will be carefully packed and sent via tracked and insured shipping. HIGH PERFORMANCE AUDIO - Discrete Class A Amplifier A Class A amplifier conducts signal over the entire range of the input signal cycle. The output transistors are biased to operate in their most linear range, and there is no crossover distortion caused by switching the signal between two push-pull devices. The HA-1's power amplification circuit for the headphones is Class A built with discrete transistors. The discrete design allows us to hand-pick and match the best parts to build the HA-1. - Toroidal Power Supply A toroidal power transformer offers superior power efficiency and much lower exterior magnetic fields over traditional laminated steel core transformers. The HA-1's toroidal linear power supply provides a very clean and robust power source to the audio components. - Fully Balanced Design The internal analog audio signal path of the HA-1 is fully balanced. For digital audio, the signal runs in balanced mode all the way from the DAC to the output jacks. Balanced analog input is kept intact, and single-ended input is converted to balanced at the input buffer. All single-ended outputs are derived from the balanced signal as well. The balanced design provides better common-mode noise rejection and improves signal quality. The balanced headphone output provides twice the voltage and four times the power of the single-ended output, enabling the HA-1 to drive the most power hungry headphones. It also provides better channel seperation by eliminating the common ground return path. - ESS Sabre32 Reference DAC The DAC is one of the most important components for digital audio playback. The SABRE32 Reference ES9018 from ESS Technology is the world’s best performing 32-bit audio DAC solution targeted for high-end consumer applications and professional studio equipment. With the ESS patented 32-bit Hyperstream™ DAC architecture and Time Domain Jitter Eliminator, the SABRE32 Reference DAC delivers an unprecedented DNR (Dynamic Range) of up to 135dB and THD+N (Total Harmonic Distortion plus Noise) of -120dB, the industry’s highest performance level that will satisfy even the most demanding audio enthusiast. To learn more about the technologies behind the exceptional performance of the SABRE DAC, please read the SABRE Technical White Paper. OPPO HA-1 4.3" information display - Clean Signal Path The HA-1 uses an analog potentiometer (the familar volume knob) to control the volume. By avoiding re-digitizing the audio signal for volume adjustment, the HA-1 provides a clean signal path for the audio. At the same time, the convenience of modern digital volume control is not lost - a remote-controlled motor turns the volume knob and a 10-bit analog-to-digital converter samples the signal to display a numeric dB level. - Made for iPod®, iPhone® and iPad® The HA-1 passes Apple's "MFi" certification and is compatibile with the latest iPod, iPhone and iPad to be used as the digital audio output accessory of these devices. By tapping directly into the digital audio signal of these devices and converting the audio to analog using the high performance SABRE32 Reference DAC, music from your favorite portable device will sound its best. - Wireless Audio via Bluetooth The HA-1 supports Bluetooth Advanced Audio Distribution Profile (A2DP) with both the standard and aptX® high quality codec. Simply pair your phone with the HA-1 and set music free

Amplificateur stéréo PHILIPS 4312 - 1982 - Très bon état - vente en Europe. Très bel amplificateur intégré Philips 4312 de mini-chaîne Très bon état, fonctionne parfaitement Une puissance de 2 x 20 watts pour ce tout petit appareil Le seul petit soucis est une petite griffure à côté du potentiomètre b'"'Balanceb'"' (photo n° 7) Dimensions: 260 x 270 x 70 (largeur x profondeur x hauteur) Poids de 3,3 Kg Photos supplémentaires sur demande Envoi bien protégé (voir mes évaluations:-) Pourun achat depuis un pays extérieur à la France, merci d'attendre lab'"'Facture b'"' avant le paiement. Envoipar MondialRelay pour la France métropolitaine: 13,90€ Envoipar MondialRelay pour l'Allemagne: 17,50€ Envoi parMondialRelay pour l'Autriche: 22,50€ Envoi parMondialRelay pour la Belgique: 14,30€ Envoi parMondialRelay pour l'Espagne: 13,60€ Envoi parMondialRelay pour l'Italie: 22,50€ Envoi parMondialRelay pour le Luxembourg: 14,30€ Envoi parMondialRelay pour les Pays Bas: 14,30€ Envoi parMondialRelay pour le Portugal: 13,60€ Pour les autres pays de l'Union Européenne, livraison par Colissimo international:42,05€ En cas d'achat depuis un pays de l'Union Européenne, attendre la b'"'Factureb'"' avant le paiement. Pas d'envoi dans les autres pays du monde (tarif très élevé) ---------------------------------------- PHILIPS 4312 stereo amplifier - 1982 - Very good condition - sale in Europe. Very nice Philips 4312 integrated mini-system amplifier Very good condition, works perfectly A power of 2 x 20 watts for this tiny device The only small problem is a small scratch next to the b'"'Balanceb'"' potentiometer (photo n° 7) Dimensions: 260 x 270 x 70 (width x depth x height) Weight of 3.3 kg Additional photos on request Well protected shipping (see my reviews:-) For a purchase from a country outside France, please wait for the b'"' Invoiceb'"' before payment. Shipping by MondialRelay for mainland France: €13.90 Shipping by MondialRelay for Germany: €17.50 Shipping byMondialRelay for Austria: €22.50 Shipping by MondialRelay for Belgium: €14.30 Shipping byMondialRelay for Spain: €13.60 Shipping byMondialRelay for Italy: €22.50 Shipping by MondialRelay for Luxembourg: €14.30 Shipping by MondialRelay for the Netherlands: €14.30 Shipping byMondialRelay for Portugal: €13.60 For other countries of the European Union, delivery by Colissimo international: €42.05 If purchasing from a European Union country, wait for the b'"' Invoiceb'"' before payment. No shipping to other countries in the world (very high price) En savoir plus

Schoeps VMS 5 U stereo preamplifier kit Sold with: 1x 5m KCY 1x 35cm KCY 1x 5m extension (binder/binder) - The incredible bandwith (20Hz to 80kHz!) makes it the perfect preamp for high resolution recording. - Suitable for MS Stereo MK4/MK8 capsules (Colette series) - Can be used also for classic stereo recording (AB) or ORTF. - DC in on either native connector or HRS (modification made by french official Schoeps dealer). - Can replace 2 CMC preamp body - the kit does not include MK4 or MK8 capsule THE PRICE IS inc. VAT Specifications: • Frequency response: 20Hz to 80kHz (-3dB) • Input impedance: 20kOhms • Input: switchable between two XLR-3F sockets and a special input for the SCHOEPS KCY Active Cable • Recommended minimum sensitivity of microphones at XLR inputs: 8mV/Pa • Maximum input level for 0.5% THD at 4dB gain setting: 14dBV (5Vrms) • Maximum input level for 0.5% THD at 20dB gain setting: -2.2dBV (780mVrms) • Preamplifier gain can be set to 4, 10, 20, 30 or 40dB • Maximum sound pressure level at 0.5% THD with CMC 6 and MK 4 at a gain of 4dB: 132dB • Maximum sound pressure level at 0.5% THD with CMC 6 and MK 4 at a gain of 10dB: 132dB • Maximum sound pressure level at 0.5% THD with CMC 6 and MK 4 at a gain of 20dB: 130dB • Maximum sound pressure level at 0.5% THD with CMC 6 and MK 4 at a gain of 30dB: 120dB • Maximum sound pressure level at 0.5% THD with CMC 6 and MK 4 at a gain of 40dB: 109dB • Equivalent noise level at a gain of 4dB: 16.5dB-A • Equivalent noise level at a gain of 10dB: 16dB-A • Equivalent noise level at a gain of 20dB: 15.5dB-A • Equivalent noise level at a gain of 30dB: 15.5dB-A • Equivalent noise level at a gain of 40dB: 15.5dB-A • Equivalent noise level (CCIR) at a gain of 4dB: 27.5dB-CCIR • Equivalent noise level (CCIR) at a gain of 10dB: 26.5dB-CCIR • Equivalent noise level (CCIR) at a gain of 20dB: 26dB-CCIR • Equivalent noise level (CCIR) at a gain of 30dB: 26dB-CCIR • Equivalent noise level (CCIR) at a gain of 40dB: 25.5dB-CCIR • Level indicators: -20dB, -3dB • Additional comments The balance potentiometer permits compensation for differences in microphone sensitivity up to 20dB • Additional comments The polarity inversion switch permits rapid change of input channel assignments in M/S recording, as when changing between an upright stereo microphone and one that is hanging downwards • The outputs are impedance-balanced and transformerless, and are switchable between the amplified microphone signals and the decoded M/S stereo signals • Output impedance: 100Ohms • Maximum output level for 0.5% THD: 18dBV (8Veff) • Minimum recommended load impedance: 2kOhms • Headphone output is switchable: either the amplified microphone signals are left/right for A/B recordings, mid/side for M/S, or the decoded M/S stereo signals can be monitored • Output impedance: 32 to 2000Ohms • Output socket: 6.35mm stereo phone jack • Filter(s): an infrasonic filter (20Hz, 18dB/oct.) is permanently active. in addition, a low-cut filter (150Hz, 6dB/oct.) can be switched on • The upper frequency limit is 80 kHz • Powering: an internal filter/regulator circuit which generates and stabilizes the supply voltages permits a wide range of input voltages (5.5V to 15.5V) • Battery powering is ossible with internal batteries (also with rechargeables) • Number and type of cells: 6x AA (also called LR6) • Recommended primary cell type: Alkaline • Recommended rechargeable cell type: NiMH • A user-replaceable fuse protects against reversing the polarity of the batteries • Battery life with alkaline cells: ca. 8.5 hours • Battery life with rechargeable batteries: ca. 3 hours (700mAh NiCd) • Battery life with rechargeable batteries:ca. 5 hours (1100mAh NiMH) • Battery life with rechargeable batteries:ca. 5.5 hours (1300mAh NiMH) • Battery life with rechargeable batteries:ca. 7 hours (1600mAh NiMH) • Battery l

Selling this awesome headphone amp as I don't use headphones that require this type of quality anymore. The unit is in great condition, comes with a remote, a power cable and a USB cable. Specifications are as follows: HIGH PERFORMANCE AUDIO - Discrete Class A Amplifier A Class A amplifier conducts signal over the entire range of the input signal cycle. The output transistors are biased to operate in their most linear range, and there is no crossover distortion caused by switching the signal between two push-pull devices. The HA-1's power amplification circuit for the headphones is Class A built with discrete transistors. The discrete design allows us to hand-pick and match the best parts to build the HA-1. - Toroidal Power Supply A toroidal power transformer offers superior power efficiency and much lower exterior magnetic fields over traditional laminated steel core transformers. The HA-1's toroidal linear power supply provides a very clean and robust power source to the audio components. - Fully Balanced Design The internal analog audio signal path of the HA-1 is fully balanced. For digital audio, the signal runs in balanced mode all the way from the DAC to the output jacks. Balanced analog input is kept intact, and single-ended input is converted to balanced at the input buffer. All single-ended outputs are derived from the balanced signal as well. The balanced design provides better common-mode noise rejection and improves signal quality. The balanced headphone output provides twice the voltage and four times the power of the single-ended output, enabling the HA-1 to drive the most power hungry headphones. It also provides better channel seperation by eliminating the common ground return path. - ESS Sabre32 Reference DAC The DAC is one of the most important components for digital audio playback. The SABRE32 Reference ES9018 from ESS Technology is the world’s best performing 32-bit audio DAC solution targeted for high-end consumer applications and professional studio equipment. With the ESS patented 32-bit Hyperstream™ DAC architecture and Time Domain Jitter Eliminator, the SABRE32 Reference DAC delivers an unprecedented DNR (Dynamic Range) of up to 135dB and THD+N (Total Harmonic Distortion plus Noise) of -120dB, the industry’s highest performance level that will satisfy even the most demanding audio enthusiast. To learn more about the technologies behind the exceptional performance of the SABRE DAC, please read the SABRE Technical White Paper. - Clean Signal Path The HA-1 uses an analog potentiometer (the familar volume knob) to control the volume. By avoiding re-digitizing the audio signal for volume adjustment, the HA-1 provides a clean signal path for the audio. At the same time, the convenience of modern digital volume control is not lost - a remote-controlled motor turns the volume knob and a 10-bit analog-to-digital converter samples the signal to display a numeric dB level. - Made for iPod®, iPhone® and iPad® The HA-1 passes Apple's "MFi" certification and is compatibile with the latest iPod, iPhone and iPad to be used as the digital audio output accessory of these devices. By tapping directly into the digital audio signal of these devices and converting the audio to analog using the high performance SABRE32 Reference DAC, music from your favorite portable device will sound its best. - Wireless Audio via Bluetooth The HA-1 supports Bluetooth Advanced Audio Distribution Profile (A2DP) with both the standard and aptX® high quality codec. Simply pair your phone with the HA-1 and set music free wirelessly from your mobile phone. - Asynchronous USB DAC By bypassing the low fidelity, poor quality DAC of traditional computer soundcards, the HA-1 turns any computer into a high performance multi-media source by converting digital audio to analog through the ESS Sabre32 Reference DAC. The asynchronous transfer mode uses the high

Kemp Elektroniks QA PLUG (QUANTUM APPROACH PLUG) EU PLUG TYPE, no sale outside europe ! Public price: 195 € Perfect condition, sold and sent with original packaging Overview - Shunt device, no dynamic losses possible - Uses Quantum Resonance Theory (QRT) - Two circuits, (LF and HF) using separate power supplies - Adjustable intensity - WA-Quantum and Creaktiv Systems Chips internal - Potted in Akiko Audio Tuning mix (minirals) and a resin to prevent microphonic effects - Can be combined without any problems with any audio mains related products - Multiple QA PLUGS intensify the effect - Simple ‘plug & play’ installatio Details - Enjoy undisturbed sound and vision Truly new visions and products can only emerge by leaving the beaten track. For audio/video products this is definitely not the most common and easy way. Revolutionary technology rarely comes from the marketing department either. For us at KE this is the result from our deep knowledge, thorough development and the strong ambition to create unique products with an outstanding price/performance ratio. The convincing proof that this approach can lead to some very remarkable products can be found in our QA PLUG and SR PLUG. Different and unusual for sure but by no means less effective. Just follow your eyes and ears. The improvement in sound and picture quality is impossible to miss. QUANTUM APPROACH PLUG and AUTOMOTIVE QA MODULE stage depth becomes deeper, higher, wider, naturally balanced with whole lotta “black space” between instruments. Almost holographic. Voices placed in front of drums (as it should be), colour and tidiness of voice to die for. *Step 4: potentiometer turned from 1 o’clock to max. Too much of a good thing equals nogood. *Back to 11 o’clock – back to heaven. The sound reminded me to the “deep listening” sessions after bong (ab)use when I was young(er). *The last step: SR Plug switched of. The sound I’ve thought was fine. seemed - wall of sound! Plugged again. I will never unplug it again. I damn love it. Ivan Benja from Milan (Italy)  Having used the QA-Plug for about a decade now, I was curious of the exclusive Quantum device from NordOst which gave an impression of credibility. However, I preferred the QAPlug from Kemp. My dealer pointed out that the QA-Plug had been upgraded in the meantime, the new version allowing the listener to adjust its strength. This new QA-Plug clearly outperforms the original one! I bought four of them! Two are positioned at the front and two at the back of my listening room, giving the sound from my multichannel system much more realism and sense of space. Dhr. de Jong from Zevenhuizen/ the Netherlands (translated by John van Polen)  StereoTimes.com, March 2011; “Kemp Elektroniks Quantum Approach Plug, Another Black Box”, by Dave Allison “I won’t speculate as to whether the Kemp device has the same effects (or to the same degree) as the Nordost products, but the theory of operation seems to be similar, and the price is right! The Kemp QA Plug remains in my system, and is, in my opinion, a worthwhile system tweak.” review Response from customers I must say, that having just tried the SNS and QA plugs on my setup,they have made a noticeable difference in my system! Much more analogue sounding, with much better layering and separation. Also, more importantly, the dynamics haven’t been dampened a bit!! Wymun from Singapore  The increased detail (from full output) of the QA was not exaggerated, but to my ear a bit too much of a good thing. I then suggested we turn the output down a bit (to approx. 75%). Here the QA was near-perfect....tons of micro-detail, spaciousness, and venue information, but very, very musical. Alan M. Kafton from Phoenix (USA)  I feel very happy with “my” sound: wide, deep, open, transparent, tidy, rich, dynamic. I can hardly imagine anything better downside a 5 fig

Sony PS-X70 (1978-1979) Stereo Turntable System Fully Automatic Direct Drive READ THE DESCRIPTION CAREFULLY ! This turntable belonged to my father, he bought it in the early 80s. I had to disassemble a wooden cabinet to take it out, and it probably saved it from the dump. It's in fully working condition, I've been using it a little for the past years, with an amplifier (also for sale, check my items) and a pair of speakers from the same era. You can see it in action here: https://www.youtube.com/watch?v=7oKFJ5RfOVE Turntable is perfectly silent, stroboscope is steady at both 33 and 45 RPM, disc format selector and pitch potentiometer works as intended, as well as all the settings to adjust the position and balance of the arm. /!/ I'm not sure if the lever to lower the arm works 100% properly, after a long period without using the turntable, the arm takes a while to go down (works perfectly to raise the arm however) /!/ /!/ The phono cable is old and the housing is a little damaged, still works perfectly but a purist may want to replace it /!/ A few marks here and here but overall in excellent cosmetic condition. The transparent top case is in good condition and stays up as intended by the hinges. The turntable is 100% genuine, apart from the needle that I changed a few years ago by a cheap one but wich works well. It's sold with the genuine owner's manual in english, french, german and spanish languages (almost impossible to find nowadays). It also comes with the genuine aluminium adaptor for 45T discs. I also give a few accessories with it: - a carbon fiber cleaner to clean the dust from discs - a tiny spirit level to check the level of the turntable - a small brush to clean the needle (Sony brand, vintage) - the needle that was installed on the arm when I found the turntable (not in good condition, just for reference) The turntable weights aproximately 13kg. I ship to Europe only with top packaging, tracking number and insurance. The turntable is also visible near Paris, if you want to take it yourself. Feel free to ask any question.

The TASCAM CD-RW901SL Professional CD Recorder has the connectivity and professional features needed by studio and installation professionals: AES / EBU inputs / outputs RS-232 control port automatic increment, at fixed intervals identification markers recorded on the CD The CD-RW901SL takes all the features of the TASCAM CD-RW900SL, adding analog XLR I / O, wired remote control, and other features demanded by professionals. The XLR (balanced) and RCA (unbalanced) outputs have dedicated input and output level settings, allowing instant changes. The digital inputs are in AES / EBU and S / PDIF format, and feature an automatic sample rate converter, ensuring compatibility with any signal. The CD-RW901SL even plays MP3 files, with their associated information (ID 3 tags). The Time Track Increment feature automatically increments the track number (Track ID) after a certain number of minutes (between 1 and 10), which is ideal for concert or conference recordings. The Key Original function changes the playback speed without changing the pitch. The PS / 2 keyboard input makes it easy to enter track titles (CD Text function), plus access to frequently used menus and transport functions with just one press of a button. Using Tascam CD recorders is easy - they're a smart choice for installers and demanding customers alike. Main features: Records on “pro” or “music” CD-R or CD-RW media (general public) NEW! Select reading speed, to improve readability of poor quality or damaged media 24-bit A / D and D / A converters Balanced analog inputs / outputs on XLR Unbalanced analog inputs / outputs on RCA S / PDIF digital inputs / outputs, coaxial and optical types Input automatic sampling frequency converter (in 44.1 kHz), deactivatable Independent left / right input level adjustment Digital volume control Synchronized recording function Function of automatic incrementation of the track number (ID Track) according to the level Time Track Increment function - increments the track number every 1-10 minutes Entering index marks NEW! Skip mode selection: skip by track, by index or by 1 minute periods Digital fade in / out adjustable from 1 to 30 s, in steps of 1 s (fade in / out) Rec Mute function (digital silence recording) Erase / unfinalize CD-RWs Continuous, single, random or programmed track play (up to 99 tracks) Play all tracks, a single track or part of a track (A-B) Auto Cue, Auto Ready, Call and Incremental Play functions Playing MP3 Files Burned to CD Play MP3 files in their directories Viewing information about MP3 files (ID3 tags) Reading speed adjustment (± 16%, in steps of 0.1 to 1%) Key potentiometer (± 6 semitones) Original Key function (change the tempo without changing the key) CD Text compatible PS / 2 keyboard port, for CD Text data entry and transport control RS-232C serial control port (9-pin Sub D connector) Parallel port Power-on Play Mode: Automatically plays CD when power is turned on, convenient for installation applications NEW! Relay recording with two CD-RW901SL Supplied with wired remote control Rackable 2 U

Genuine sought after KLEMT Echolette BS40 in perfect working condition.  Early Marshall-type sounding machine (think old Jtm 45 style) made in Germany, all original, this great Amp delivers 40W of pure quality sound either for Bass or Guitar. Think British beat era, Hamburg boys.. early Yardbirds, Beatles, Kinks, Small Faces, Easybeats kind of bands that all certainly played on those ones..  It has a real clear and pure sound, with a lot of presence. Makes any guitar really shine.  And loves any pedal or thing you would add in the input ring. Just tried it back the recent days to give it a full check before putting on sell: anything works as it should, I think I already hate seeing it go away..  need to finance new projects and this beauty deserves to be played. Early sixties, solid, a real workhorse, this guy is also very convenient en easy to use:  - 4 jack entries on two channels (this machine would allow 4 musicians to join together in the crypt !) - 2 volumes (1 for each channel) - bass / mid / treble  - presence  - standby switch - 1 speaker output - impedance speaker selection switch (5/20) (think 8 / 16 ohms)   - upgraded up-to-the standards of today 220V cable - and last, but not least at all, the magical "Level / Pegel" potentiometer: this one works like a preamp volume, allowing you to choice the level of natural crunch of the beast Collectors condition I would say.  Anyway your chance to grab a great piece of sound machine in excellent condition.  Will ship anywhere, very well packed and fully insured. Pick-up is also possible, of course. West of France. Available on other platforms too, can't guarantee it is still available on  if sold simultaneously in some other place. Thanks for your visit. Any question welcome.

Je vends un POTENTIOMETRE d'occasion.   Reférence: M10KB  06304805  89 B   Livraison 48h après règlement effectif.   Me contacter pour plus de renseignement   Merci     For sale a POTENTIOMETER   Reférence: M10KB  06304805  89 B   Contact me for more informations. Tank you

pour amplificateur  REVOX B 750 MK1/MK2            potentiomètres,  interrupteurs, ressorts...:  de haut à gauche et de haut en bas comme sur la photo:                 sélecteur tape A/B   -  bass   -   présence   -   trebble  Filtre  -  loudness (levier cassé) -  Balance  - sélecteur de sources - sélécteur enceintes                           4 Ressort Contact pour revox commutateurs rotatifs cartes: 1.178.110.11                  protection circuit 1.178.200.11                  Tone control amplifier 1.178.221.11                  Tape monitor board 1.178.226                       impédance board 1.178.135.11                  Power supply x 2 (2 items) sans référence              carte porte fusibles en supplément mais hors d'usage: 1.178.110.11                 protection circuit (hs) 1.178.216.11                 tone control (hs) automatic translation:                    for amplifier REVOX B 750 MK1 / MK2            potentiometers, switches, springs...:  from top to left and from top to bottom as in the photo:                 A / B tape selector - bass - presence - trebble Filter - loudness (broken lever) - Balance - source selector - speaker selector                          4 Contact spring for revox rotary switches cards: 1.178.110.11               circuit protection 1.178.200.11               Tone control amplifier 1.178.221.11               Tape monitor board 1,178,226                    impedance board 1.178.135.11               Power supply x 2 (2 items) without fuse holder card reference in addition but out of use: 1.178.110.11               circuit protection (hs) 1.178.216.11               tone control (hs) automatic translation:                      für Verstarker  REVOX B 750 MK1 / MK2                             Potentiometer, Schalter, Federn...:  von oben nach links und von oben nach unten wie auf dem Foto:                 A / B-Bandwahlschalter - Bass - Präsenz - Höhen Filter - Lautstärke (Hebel gebrochen) - Balance - Quellenwahlschalter - Lautsprecherwahlschalter                          4 Kontaktfeder für revox Drehschalter Karten: 1.178.110.11               Schaltkreisschutz 1.178.200.11               Tonregelverstärker 1.178.221.11               Bandüberwachungsplatine 1.178.226                    Impedanzplatine 1.178.135.11               Netzteil x 2 (2 Artikel) ohne Sicherungshalterkartenbezug zusätzlich aber außer Betrieb: 1.178.110.11              Schaltkreisschutz (hs) 1.178.216.11              Klangregelung (hs)

Carte préampli pour ampli Pioneer SA-5500 II Possibilité de vendre au détails potentiomètre ou sélecteur me contacter Preamp board for Pioneer SA-5500 II amplifier Possibility to sell potentiometer or selector details contact me

Air Tight ATC-3 HQ Tube preamplifier. État : Occasion Service de livraison : Colissimo Recommandé Because I was looking for a more polyvalent solution (preamp and network player) I stopped to use this preamp 2 years ago. I actually not used it a lot (around 200 hours top). This pre-amp is in excellent state. Coupled to an Air Tight Atm1s, it gives a kick to the amp and delivers a more lively sound and deep. Equipped with tubes, signature sound can tweaked by changing tubes. This preamp comes with original tubes selected by air Tight. The build quality is excellent (made in Japan by A&M limited also known as Air Tight). Below few specs: - Hand made in Japan - SRPP circuit with buffer stage to reduce noise, lower impedance and get a wide linearity - Upgraded potentiometer with Alps RK-501 - 2 main outputs, 1 monitor output and 1 rec ouput - 4 main inputs - 1 ground output - input sensitivity: 110mV - Tubes: 1 x 12AX7 (ECC83), 2x12AU7(ECC82) - Dimensions: 90 x 430 x 325 (mm) - Weight: 8kg. Bought 6600€ (with Alps RK-501 included) Shipping cost includes insurances

Rare Denon PMA-630 integrated amplifier Made in Japan 1978 / 79. some traces of use - original manual operating instructions Power output 2 x 80 w rms Size 434 x 145 x 390 mm Deep - Weight 16 kg. New alps potentiometer - now the loudness function doesn’t work but not really useful... and new run light - Invoice 30/04/2021 In perfect working order Great sound … Links https://stereonomono.blogspot.com/2019/12/denon-pma-630-amplifier.html https://www.hifiengine.com/manual_library/denon/pma-630.shtml https://www.denon.jp/ja-jp/museum/products/pma630.html https://fr.audiofanzine.com/ampli-hifi/denon/pma-630/avis/r.168275.html https://www.radiomuseum.org/r/denon_stereo_integrated_amplifier_pma_630.html solid shipping with insurance before purchase For International Sales, Contact me, please SHIPPING INFORMATION ALL POSTAGE PRICES ARE ESTIMATES – FINAL POSTAGE PRICE DEPENDS ON BUYER LOCATION AND FINAL VALUE INSURANCE

Roland Juno 106 Good Condition for his age. All the potentiometer works fine.Some scratchs and dimps, he is not perfect but servicied. The 6 80017A VCF / VCA chips have been cleaned and refurbished, DIP socket install - Some tactile switches have been changed by new ones. Full calibration. New battery with easy access, new AC outlet. PSU caps perfect. Come with of Bank A factory & B patches and hardcase.