Switch without

Switch Cisco SG200-50 50 ports Gigabit POE.  Déjà utilisé. Fonctionnement OK, pas d'alarme. Dernier firmware à jour. Vendu sans câble d'alimentation. Cisco SG200-50 50-port Gigabit POE switch. Already used. Operation OK, no alarm. Latest firmware up to date. Sold without power cable. European shipping: UPS standard

Switch allied telesis AT-x510L-52GT. État : "Reconditionné par le vendeur" Service de livraison : Colissimo without brackets with power cable

- Description Description 3Com SuperStack II Switch 3300 with 24 Ethernet Ports HP SuperStack II 3300 24-port Switch Features b'&' Benifits Four SuperStack II Switch 1100 or 3C16980 Switch 3300 units can be interconnected to form a stack that offers unrivaled performance and management features. Each unit has a built-in connector at the rear of the unit called the matrix port. Two units can be connected back-to-back with a SuperStack II Switch matrix cable. To connect more than two units, a SuperStack II matrix module can be inserted into the high-speed module slot of one of the units in the stack, and a matrix cable can be used to connect to each switch in the stack. Stacking provides the user with a plethora of benefits. These include the ability to manage in excess of 100 ports as a single logical entity. Configuration is therefore faster and simpler. Stacking also provides the user with the optional resilient IP addresses across the stack. Thus if a failure should occur, the resilient IP address can be used for management stacking using the SuperStack II Switch matrix module and cable, keeping front panel ports free and increasing the number of matrix ports in an aggregated system. Management Transcend� network management All SuperStack II switches are managed by 3Com Transcend� network management and control solutions. Transcend solutions give you end-to-end visibilityand control over all devices in your network with two levels of management: 1) technologies, such as embedded SmartAgent� software and RMON, within 3Com devices throughout the network, and 2) centralized highly automated applications at the network center for monitoring, configuring, and troubleshooting all devices in the network. Ships with 3Com Transcend Network Supervisor This PC-based application provides powerful, yet easy-to-use network management tuned to the needs of small-to-medium enterprises. Network devices are automatically discovered and network activity and stress monitored through an intuitive graphical interface focused on the tasks and information all managers need to take control of their network. Web-based management Manage your switches with any Web browser, either through direct or dial-up connection or across the LAN. This delivers ease of use and accessibility to network management personnel and reduces in-service costs, but still with full security. Security — Disconnect Unauthorized Device (DUD) LAN security architecture with DUD automatically disconnects unauthorized devices from the LAN. Roving Analysis Port (RAP) RAP allows a network analyzer attached to any unit in a stack to monitor any of the switch ports or virtual LANs (VLANs) in the stack. It also minimizes the time required for problem determination and resolution and maximizes switch uptime, thereby lowering your cost of ownership. RMON support Transcend software’s powerful combination of RMON (Remote Monitoring, a superset of SNMP MIB II) and embedded SmartAgent software reduces the processing burden on your management station, minimizes network traffic, and saves time by automatically monitoring and analyzing your network. RMON tells you at a glance how the network is performing and who is using it the most. And Transcend software gives you the added benefit of RMON features in your network without the processing and memory costs usually associated with RMON. See the At-a-Glance RMON Support table for details on RMON groups supported by SuperStack II switches. Class of Service (CoS) CoS can be defined simply as a method for prioritizing various traffic types. 3Com switches can support two methods of enabling CoS on Ethernet networks. The first method is IEEE 802.1D (incorporating 802.1p), which enables eight levels of prioritization; and the second method is 3Com’s innovative PACE� technology, which allows the user to specify certain applications as high priority. A hardware feature, dual queues, is used to exploit these traffic prioritization schemes; the dual q En savoir plus Collaboration commerciale.

The GO-SW-8G 8-Port Gigabit Easy Desktop Switch is part of D-Link’s new series of SOHO devices that make use of D-Link’s Green Technology, providing energy savings, reduced heat, and a longer product life without sacrificing performance or functionality. It provides eight Gigabit ports for easy expansion of your network and a quick way to upgrade your network to Gigabit connectivity. An energy-efficient power adapter (Energy Star Level VI qualified), minimised the use of harmful substances (RoHS compliant), and recyclable packaging makes this switch truly environmentally friendly. Fast and Reliable Networking The D-Link GO-SW-8G 8-Port Gigabit Easy Desktop Switch creates a blazing fast network for your office, as its Gigabit Ethernet ports provide high-speed wired connections for up to eight PCs or other devices. The GO-SW-8G also features QoS, which prioritises network traffic so that time-sensitive data is delivered efficiently, even during bursts of high data traffic. Finally, plug and play support makes setup a breeze. Conserve Energy The 8-Port Gigabit Easy Desktop Switch helps you conserve energy automatically through several methods. The switch supports IEEE 802.3az Energy-Efficient Ethernet (EEE) which cuts down on power consumption during periods of low data activity and will proceed to put the unused port into sleep mode, saving a substantial amount of power. It also adjusts the amount of power supplied to a port according to the length of the connected Ethernet cable. Environmentally-friendly The 8-Port Gigabit Easy Desktop Switch was designed with the environment in mind and is compliant with Energy Star Level VI, as well as with the stringent CEC and MEPS regulations that require the use of energy efficient power adapters. The switch is also built to follow RoHS standards to minimise the use of hazardous materials and uses recyclable packaging that helps reduce waste, complying with the WEEE directive. En savoir plus Collaboration commerciale.

Falcon VGA adapter (with switch) Fonctionne Parfaitement. This tiny little board allow to plug a common vga monitor (31khz or 15khz compatible) to the video port of the Atari Falcon without any case connection or aditional setup. Just plug and play (use). It also includes a switch to change between st modes and vga modes. This adapter includes a real DB19 female connector. Design based on the Bryan Edewaard schematic.

Brocade BR-5120-0008 5100 8/40 port 8GB FC SAN Switch 24 Active Ports w/ 8Gb SFP 80-1001589-11  - STOCK FR - EXPÉDITION 24H 254.4 € Type de produit - Switch État - Fonctionnel Numéro de produit (PN) - 80-1001589-11 Modèle du produit - Brocade BR-5120-0008 5100 Format - Rackable Garantie - 6 mois Contenu additionnel - Sans alimentation PN équivalent - NA-5120-0008 Nombre de ports - 40 Ports Norme(s) réseau - 10/100/1000 Mbps POE - Non Features and Benefits: Alteon NG enables application delivery networking by providing safe and efficient distribution of business-critical applications across your company's network. Alteon NG is well suited for environments with growing SSL offloading needs. Service Availability Separate vADC per Application/Service - Complete isolation between virtual ADC (vADC) instances at the network, fault and configuration levels - Full resource reservation - Next-generation services can be enabled without impacting the performance of other service applications Smart Health Monitoring and Failure Detection - Quickly identifies failures at any point along the application or transaction path and reacts proactively - Hundreds of pre-defined health checks are instantly accessible (after installation), ensuring quick server/application availability and lowering total cost of ownership Stateful Persistency - Prevents application session disruptions - Ensures transaction completion Device Redundancy: Active-Active, Active-Backup or Active-Standby - Prevents the introduction of a single point of failure - Seamless device redundancy with VRRP support - Protects hardware investment and lowers total cost of ownership Real-time Traffic Redirection - Automatically redirects traffic to best available instances, servers and farms in the data center or between redundant sites for optimal user experience - Optimizes the use of existing applications and server resources and cost effectively scales resources, fully protecting server investment - IPv6 network support Global Load Balancing - Guarantees transaction completion and fast response times across multiple data centers to support business continuity and disaster recovery plans Performance Acceleration Faster Web Application Response Time - FastView web performance optimization – integrating the most advanced Web acceleration technology in the industry - Optimized acceleration per any browser and end-user device - Up to 40% response time reduction for increased conversion rates, revenues and productivity - Reduced total transferred content size through content compression Optimized IT Infrastructure Through Server Offloading - Secure Socket Layer (SSL) offloading - TCP connections multiplexing - Content caching - for both static and dynamic content - both at the browser and on the ADC, servicing user requests faster. Bandwidth Management and Traffic-Shaping Capabilities - Aligns bandwidth usage to meet business objectives - Provides administrators with the necessary tools to streamline enforcement of bandwidth management policies - Guarantees bandwidth allocation for latency-sensitive and mission-critical applications, as well as premium users, through the use of QoS algorithms Visibility Application Performance Monitoring (APM) - Real-time tracking of application SLA - Measure real user transactions including errors - Out-of-the-box solution, embedded with the ADC, no scripting nor installations. - Tracking SLA by location, user, application and transaction type ADC Infrastructure and Application Visibility - Real-time management dashboard which continuously monitors and displays application delivery services & system status, network and application performance & faults and more – allowing fast, efficient incident resolution - Cross-ADC historical reports delivering better capacity planning across the entire ADC infrastructure - Drilldown-able reports enab

OnDemand Switch Radware Alteon 4408-1GB /ODS-VL/6GE+2SFP/DUAL/4GB/HDD/ROHS 19010011  - STOCK FR - EXPÉDITION 24H 780.8 € Type de produit - Switch État - Fonctionnel Numéro de produit (PN) - 4408-1GB Modèle du produit - Alteon 4408-1GB /ODS-VL/6GE+2SFP/DUAL/4GB/HDD/ROHS Format - Rackable Garantie - 6 mois Contenu additionnel - Sans alimentation PN équivalent - 19010011 Nombre de ports - 8 ports Norme(s) réseau - 10/100/1000 Mbps POE - Non Features and Benefits: Alteon NG enables application delivery networking by providing safe and efficient distribution of business-critical applications across your company's network. Alteon NG is well suited for environments with growing SSL offloading needs. Service Availability Separate vADC per Application/Service - Complete isolation between virtual ADC (vADC) instances at the network, fault and configuration levels - Full resource reservation - Next-generation services can be enabled without impacting the performance of other service applications Smart Health Monitoring and Failure Detection - Quickly identifies failures at any point along the application or transaction path and reacts proactively - Hundreds of pre-defined health checks are instantly accessible (after installation), ensuring quick server/application availability and lowering total cost of ownership Stateful Persistency - Prevents application session disruptions - Ensures transaction completion Device Redundancy: Active-Active, Active-Backup or Active-Standby - Prevents the introduction of a single point of failure - Seamless device redundancy with VRRP support - Protects hardware investment and lowers total cost of ownership Real-time Traffic Redirection - Automatically redirects traffic to best available instances, servers and farms in the data center or between redundant sites for optimal user experience - Optimizes the use of existing applications and server resources and cost effectively scales resources, fully protecting server investment - IPv6 network support Global Load Balancing - Guarantees transaction completion and fast response times across multiple data centers to support business continuity and disaster recovery plans Performance Acceleration Faster Web Application Response Time - FastView web performance optimization – integrating the most advanced Web acceleration technology in the industry - Optimized acceleration per any browser and end-user device - Up to 40% response time reduction for increased conversion rates, revenues and productivity - Reduced total transferred content size through content compression Optimized IT Infrastructure Through Server Offloading - Secure Socket Layer (SSL) offloading - TCP connections multiplexing - Content caching - for both static and dynamic content - both at the browser and on the ADC, servicing user requests faster. Bandwidth Management and Traffic-Shaping Capabilities - Aligns bandwidth usage to meet business objectives - Provides administrators with the necessary tools to streamline enforcement of bandwidth management policies - Guarantees bandwidth allocation for latency-sensitive and mission-critical applications, as well as premium users, through the use of QoS algorithms Visibility Application Performance Monitoring (APM) - Real-time tracking of application SLA - Measure real user transactions including errors - Out-of-the-box solution, embedded with the ADC, no scripting nor installations. - Tracking SLA by location, user, application and transaction type ADC Infrastructure and Application Visibility - Real-time management dashboard which continuously monitors and displays application delivery services & system status, network and application performance & faults and more – allowing fast, efficient incident resolution - Cross-ADC historical reports delivering better capacity planning across the entire ADC infrastructure - Drilldown-able reports

OnDemand Switch Radware Alteon 4408-1GB /ODS-VL/6GE+2SFP/DUAL/4GB/HDD/ROHS 19010011  - STOCK FR - EXPÉDITION 24H 768.9 € Type de produit - Switch État - Fonctionnel Numéro de produit (PN) - 4408-1GB Modèle du produit - Alteon 4408-1GB /ODS-VL/6GE+2SFP/DUAL/4GB/HDD/ROHS Format - Rackable Garantie - 6 mois Contenu additionnel - Sans alimentation PN équivalent - 19010011 Nombre de ports - 8 ports Norme(s) réseau - 10/100/1000 Mbps POE - Non Features and Benefits: Alteon NG enables application delivery networking by providing safe and efficient distribution of business-critical applications across your company's network. Alteon NG is well suited for environments with growing SSL offloading needs. Service Availability Separate vADC per Application/Service - Complete isolation between virtual ADC (vADC) instances at the network, fault and configuration levels - Full resource reservation - Next-generation services can be enabled without impacting the performance of other service applications Smart Health Monitoring and Failure Detection - Quickly identifies failures at any point along the application or transaction path and reacts proactively - Hundreds of pre-defined health checks are instantly accessible (after installation), ensuring quick server/application availability and lowering total cost of ownership Stateful Persistency - Prevents application session disruptions - Ensures transaction completion Device Redundancy: Active-Active, Active-Backup or Active-Standby - Prevents the introduction of a single point of failure - Seamless device redundancy with VRRP support - Protects hardware investment and lowers total cost of ownership Real-time Traffic Redirection - Automatically redirects traffic to best available instances, servers and farms in the data center or between redundant sites for optimal user experience - Optimizes the use of existing applications and server resources and cost effectively scales resources, fully protecting server investment - IPv6 network support Global Load Balancing - Guarantees transaction completion and fast response times across multiple data centers to support business continuity and disaster recovery plans Performance Acceleration Faster Web Application Response Time - FastView web performance optimization – integrating the most advanced Web acceleration technology in the industry - Optimized acceleration per any browser and end-user device - Up to 40% response time reduction for increased conversion rates, revenues and productivity - Reduced total transferred content size through content compression Optimized IT Infrastructure Through Server Offloading - Secure Socket Layer (SSL) offloading - TCP connections multiplexing - Content caching - for both static and dynamic content - both at the browser and on the ADC, servicing user requests faster. Bandwidth Management and Traffic-Shaping Capabilities - Aligns bandwidth usage to meet business objectives - Provides administrators with the necessary tools to streamline enforcement of bandwidth management policies - Guarantees bandwidth allocation for latency-sensitive and mission-critical applications, as well as premium users, through the use of QoS algorithms Visibility Application Performance Monitoring (APM) - Real-time tracking of application SLA - Measure real user transactions including errors - Out-of-the-box solution, embedded with the ADC, no scripting nor installations. - Tracking SLA by location, user, application and transaction type ADC Infrastructure and Application Visibility - Real-time management dashboard which continuously monitors and displays application delivery services & system status, network and application performance & faults and more – allowing fast, efficient incident resolution - Cross-ADC historical reports delivering better capacity planning across the entire ADC infrastructure - Drilldown-able reports enab

32R1870 -  GENUINE ORIGINAL IBM NORTEL SWITCH MODUL FIBRE FOR BC (without gbic)   PRODUCTS SOLD BY RESELLER WITH BILL PRODUIT VENDU PAR VENDEUR PROFESSIONNEL AVEC FACTURE Condition: Used / Tested Occasion testé Physical Condition: Good / état ok Warranty Provided: 90 Days / garantie de 3 mois

Auto data Serial Switch for Macintosh (EXLINK HM-401) - up to 4 Macs This device enables you to share one Mac serial device (mini-din 8 mac serial connectors) with 4 Macs It's an auto-switch, that means it automatically connects the mac with the peripheral when it senses a serial connection coming from a Mac. It a few rust points, but it works very well. WARNING: 9 VOLT DC power supply needed, and NOT sold with the item État : Occasion Service de livraison : Colissimo Check my other Classic Mac items, if you want to buy more than one item and have your shipping fee lowered, add the items to your basket without paying immediatly, and click on "Request Total" instead.

Switch Gigabit 8 ports niveau 2 DGS‑3200‑10 The DGS-3200-10 xStack 10-Port Gigabit L2 Managed Switch is a managed layer 2 Security Gigabit switches with IPv6 support, designed to maximise network performance in enterprise environments. D-Link Green Technology decreases energy costs by reducing power consumption, without compromising on performance. - Nombreuses options de qualité de service (QoS) et de listes de contrôle d’accès (ACL) - Gestion d’IP unique (SIM) : jusqu’à 32 périphériques dans une pile virtuelle - Fonction de protection de la machine (Safeguard Engine™) de D-Link - Administration complète avec de nombreuses fonctions de sécurité - 2 ports SFP disponibles pour la connectivité fibre optique - Ventilation silencieuse sans ventilateur Le switch Gigabit Security DGS-3200-10 est un switch compact et administrable haut de gamme destiné à assurer une sécurité complète à la périphérie du réseau. Avec sa taille conçue pour le bureau et sa conception sans ventilateur, il est idéal pour les petites succursales n’ayant pas leur propre armoire de données. Sécurité complète des points d’extrémité Le switch DGS-3200-10 propose une gamme complète de fonctions de sécurité pour les points d’extrémité afin que vous ayez toute confiance en votre réseau. Il met en œuvre le contrôle de l’identité des utilisateurs grâce au système d’authentification et d’autorisation 802.1X basé sur les hôtes, ainsi qu’au contrôle d’accès basé sur les adresses Web sans clients (WAC) et au contrôle d’accès basé sur les adresses MAC (MAC) pour faciliter le déploiement. Des listes de contrôle d’accès (ACL) sophistiquées permettent aux administrateurs de bloquer les paquets susceptibles d’amener une infection par des vers ou des virus dans le réseau. L’association innovante des ports IP et MAC protège contre l’usurpation ARP et les attaques de type « Man in the Middle » en empêchant les utilisateurs de configurer manuellement leur propre adresse IP ou MAC et en permettant aux administrateurs de vérifier que les informations IP se trouvant sur le serveur syslog ou sur le fichier journal du firewall sont correctes. Coopération avec d’autres éléments du réseau Lorsqu’il est associé à un firewall NetDefend de D-Link, le switch peut placer automatiquement en quarantaine tout hôte présentant un comportement anormal. Ce mécanisme de sécurité, D-Link ZoneDefense, assure une protection proactive du réseau en empêchant les virus de se propager à tout le réseau et en contrant les attaques dangereuses dont il est la cible1. De plus, le switch prend en charge la fonction NAP de Microsoft (Network Access Protection) qui autorise seulement les clients ayant effectué une mise à jour complète à accéder au réseau. 1disponible dans une prochaine mise à jour du firmware Amélioration de la redondance et des performances. Pour améliorer la tolérance aux pannes des réseaux et plus particulièrement des chemins par commutation, le DGS-3200-10 prend en charge les protocoles Spanning Tree, y compris les STP 802.1D, 802.1w et 802.1s. De plus, l’agrégation de liens 802.3ad permet de créer plusieurs liaisons Gigabit entre des switches ou avec des serveurs. Grâce à une fonction unique de protection de la machine, Safeguard Engine™ de D-Link, les administrateurs peuvent configurer des seuils pour contrôler les répercussions de la transmission au switch d’un nombre excessif de paquets, généralement causée par des attaques de virus/vers. La fiabilité, la facilité de maintenance et la disponibilité du switch s’en trouvent renforcées. Surveillance du trafic/Contrôle de la bande passante Les administrateurs réseau peuvent gérer la bande passante en définissant des niveaux de débit pour chaque port. Afin d’obtenir une bonne qualité de service (QoS), le switch prend en charge les files d’attente prioritaires 802.1p et la classification des paquets basée sur le type de service (TOS), sur le code d’accès aux services différenciés (DSCP), sur l’adresse MAC, l’adresse IP, l’ID du VLAN et le type de protocole L4, afin de permettre aux services réseau essentiels (voix sur IP, ERP, Intranet et visioconférence) d’avoir la priorité sur les autres applications. Le switch propose également la surveillance IGMP et la surveillance MLD basée sur Ipv6 pour une plus grande efficacité des transmissions multicast.  Gestion d’IP unique (SIM) Le switch DGS-3200-10 simplifie et accélère vos tâches d’administration puisqu’il permet de configurer, de surveiller et de gérer plusieurs switches depuis un poste de travail exécutant un navigateur Web au moyen d’une adresse IP unique. Cette pile virtuelle est administrée en tant qu’objet unique, toutes les unités étant gérées via une seule adresse IP. Administration Le DGS-3200-10 prend en charge les protocoles d’administration basés sur des normes, tels que SNMP, RMON, Telnet, console, l’interface utilisateur Web et l’authentification SSH/SSL. Télécharger la fiche technique. Mode Projet - Contactez votre revendeur D-Link local - Nombreuses options de qualité de service (QoS) et de listes de contrôle d’accès (ACL) - Gestion d’IP unique (SIM) : jusqu’à 32 périphériques dans une pile virtuelle - Fonction de protection de la machine (Safeguard Engine™) de D-Link - Administration complète avec de nombreuses fonctions de sécurité - 2 ports SFP disponibles pour la connectivité fibre optique - Ventilation silencieuse sans ventilateur Le switch Gigabit Security DGS-3200-10 est un switch compact et administrable haut de gamme destiné à assurer une sécurité complète à la périphérie du réseau. Avec sa taille conçue pour le bureau et sa conception sans ventilateur, il est idéal pour les petites succursales n’ayant pas leur propre armoire de données. Sécurité complète des points d’extrémité Le switch DGS-3200-10 propose une gamme complète de fonctions de sécurité pour les points d’extrémité afin que vous ayez toute confiance en votre réseau. Il met en œuvre le contrôle de l’identité des utilisateurs grâce au système d’authentification et d’autorisation 802.1X basé sur les hôtes, ainsi qu’au contrôle d’accès basé sur les adresses Web sans clients (WAC) et au contrôle d’accès basé sur les adresses MAC (MAC) pour faciliter le déploiement. Des listes de contrôle d’accès (ACL) sophistiquées permettent aux administrateurs de bloquer les paquets susceptibles d’amener une infection par des vers ou des virus dans le réseau. L’association innovante des ports IP et MAC protège contre l’usurpation ARP et les attaques de type « Man in the Middle » en empêchant les utilisateurs de configurer manuellement leur propre adresse IP ou MAC et en permettant aux administrateurs de vérifier que les informations IP se trouvant sur le serveur syslog ou sur le fichier journal du firewall sont correctes. Coopération avec d’autres éléments du réseau Lorsqu’il est associé à un firewall NetDefend de D-Link, le switch peut placer automatiquement en quarantaine tout hôte présentant un comportement anormal. Ce mécanisme de sécurité, D-Link ZoneDefense, assure une protection proactive du réseau en empêchant les virus de se propager à tout le réseau et en contrant les attaques dangereuses dont il est la cible1. De plus, le switch prend en charge la fonction NAP de Microsoft (Network Access Protection) qui autorise seulement les clients ayant effectué une mise à jour complète à accéder au réseau. 1disponible dans une prochaine mise à jour du firmware Amélioration de la redondance et des performances. Pour améliorer la tolérance aux pannes des réseaux et plus particulièrement des chemins par commutation, le DGS-3200-10 prend en charge les protocoles Spanning Tree, y compris les STP 802.1D, 802.1w et 802.1s. De plus, l’agrégation de liens 802.3ad permet de créer plusieurs liaisons Gigabit entre des switches ou avec des serveurs. Grâce à une fonction unique de protection de la machine, Safeguard Engine™ de D-Link, les administrateurs peuvent configurer des seuils pour contrôler les répercussions de la transmission au switch d’un nombre excessif de paquets, généralement causée par des attaques de virus/vers. La fiabilité, la facilité de maintenance et la disponibilité du switch s’en trouvent renforcées. Surveillance du trafic/Contrôle de la bande passante Les administrateurs réseau peuvent gérer la bande passante en définissant des niveaux de débit pour chaque port. Afin d’obtenir une bonne qualité de service (QoS), le switch prend en charge les files d’attente prioritaires 802.1p et la classification des paquets basée sur le type de service (TOS), sur le code d’accès aux services différenciés (DSCP), sur l’adresse MAC, l’adresse IP, l’ID du VLAN et le type de protocole L4, afin de permettre aux services réseau essentiels (voix sur IP, ERP, Intranet et visioconférence) d’avoir la priorité sur les autres applications. Le switch propose également la surveillance IGMP et la surveillance MLD basée sur Ipv6 pour une plus grande efficacité des transmissions multicast.  Gestion d’IP unique (SIM) Le switch DGS-3200-10 simplifie et accélère vos tâches d’administration puisqu’il permet de configurer, de surveiller et de gérer plusieurs switches depuis un poste de travail exécutant un navigateur Web au moyen d’une adresse IP unique. Cette pile virtuelle est administrée en tant qu’objet unique, toutes les unités étant gérées via une seule adresse IP. Administration Le DGS-3200-10 prend en charge les protocoles d’administration basés sur des normes, tels que SNMP, RMON, Telnet, console, l’interface utilisateur Web et l’authentification SSH/SSL. Track Page Views With Auctiva's FREE Counter

MANUELS: https://ftp.lancom.de/Documentation/LCOS/Menu%20Reference/MA_LCOS-884-Menu-Reference_EN.pdf https://www.lancom-systems.com/download/LC-1781VA/HW-QUICK-REFERENCE_1781VA_EN.pdf RESET: https://www.lancom-systems.com/docs/LCOS/Refmanual/EN/topics/aa1198367.html VOIR PHOTOS, AVEC KIT MISE EN BAIE INCLUDING POWER SUPPLY The LANCOM 1781VA is a professional, high-performance VPN router for high-speed Internet access with integrated VDSL2 and ADSL2+ modem. Thus it provides maximum flexibility for a transition from ADSL to high-speed VDSL Internet connections. Likewise, an operation without splitter is possible based on ADSL2+ Annex B / J (over ISDN) or A / M (over POTS). In all industries and branches of trade with high demands on security and performance it is the ideal foundation for a professional site connectivity. With its extensive VPN capabilities, the device provides secure, high-performance connectivity to branch offices and remote workers. The four ports of the integrated Gigabit Ethernet switch ensure maximum performance and are also energy-efficient based on IEEE 802.3az: If no data is transmitted over an interface, its power consumption shuts down automatically. The LANCOM 1781VA supplies everything required of a modern enterprise network, such as comprehensive Quality-of-Service capabilities and an object-oriented firewall. Marque‎Lancom SystemsNuméro du modèle de l'article‎62032séries‎1781VACouleur‎Noir LANCOM 1781A High-performance VPN router with integrated ADSL2+ modem for professional site connectivity The professional VPN router LANCOM 1781A provides companies with secure Internet access and, thanks to the integrated ADSL2+ modem, it connects directly to a standard DSL line without additional hardware. With its extensive VPN capabilities and Gigabit Ethernet, the device provides secure, high-performance connectivity to branch offices and remote workers, and it supports a high-speed local network. The four ports of the integrated Gigabit Ethernet switch ensure maximum performance and are also energy-efficient as per IEEE 802.3az: If no data is transmitted over an interface, its power consumption shuts down automatically. The LANCOM 1781A supplies everything required of a modern enterprise network, such as comprehensive Quality-of-Service capabilities and an object-oriented firewall. - Fast Internet access and professional networking for smaller companies and branch offices - Integrated multimode ADSL2+ modem and energy-efficient Gigabit switch as per IEEE 802.3az - VPN site connectivity with 5 simultaneous IPsec VPN channels (25 channels optional) - Network virtualization with up to 16 virtual networks on one device (ARF) - Stateful-inspection firewall with intrusion detection/denial-of-service protection - High availability with optional 3G backup via USB (*only supported UMTS-USB modems) - DLS ports1 ADSL2+ | PPPoE, PPPoA, IPoA, Multi-PPPoE, ML-PPP, PPTP (PAC or PNS) and IPoE (with or without DHCP), RIP-1, RIP-2, VLAN - Ethernet ports4 individual 10/100/1000 Mbps Ethernet ports; up to 3 ports can be switched as additional WAN ports with load balancing. Ethernet ports can be electrically disabled within LCOS configuration. The ports support energy saving according to IEEE 802.3az - ISDN ports1 ISDN BRI port (S0 bus) |ISDN data or voice usage via internal ISDN interface - Wireless portsNO - Load balancingStatic and dynamic load balancing over up to 4 WAN connections. Channel bundling with Multilink PPP (if supported by network operator) - VPN5 integrated/ 25 Optional |Backup of VPN connections across different hierarchy levels, Any VPN remote sites can be defined (the tunnel limit applies only to 5 active connections). Up to 25 VPN (VPN load balancing) - USB1 USB 2.0 | Operation of an external UMTS/HSDPA USB card at the USB host port |A UMTS USB modem is not supplied. Supported UMTS USB modem at www.lancom.eu/umts-support - Additional featuresStateful-inspection firewall with intrusion detection/denial-of En savoir plus Collaboration commerciale.

Multiservice 802.11n dual band concurrent 2 stream Wired/Wireless wall switch Ruckus ZoneFlex 7055 - ZoneFlex 802.11n dual-band concurrent 2.4 GHz & 5 GHz, Wired/Wireless Wall Switch, 1 10/100/1000 & 4 10/100 Ethernet Access Ports, POE in, 802.3af Ethernet out (one port), PBX pass through. Does not include DC power supply. This part is the international version for all countries besides USA and China.  The ZoneFlex 7055 is the industry"s first dual-band dual-concurrent wall mounted wired switch and wireless wall switch designed for next generation wireless. The ZoneFlex 7055 features integrated 2.4GHz and 5GHz concurrent 802.11n WLAN radios, five wired Ethernet ports, PoE ouput, and a passthrough port for devices such as digital phones that require native access to a PBX system. Designed with hotels and multi-dwelling units in mind, the ZoneFlex 7055 is easy to mount to an electrical junction box and has a sleek and low-profile form factor. It provides flexible deployment options with Ruckus SmartMesh Networking for areas without existing Ethernet infrastructure.

fonctionne working very good condition The Sixnet SLX-3ES-2SC is a 3 port unmanaged copper to fiber industrial media converter. This SlimLine Plus SLX series switch is housed in an aluminum DIN-Rail enclosure, and features 4km multimode fiber optic cable with an SC style fiber connector. It has two 10/100BaseTX RJ45 ports and one 100BaseFX fiber port. It is built to run at an efficient speed for real-time operation, as well as to meet the demands of industrial networks. The plug and play capability means that the switch is ready to go right away, without needing a user set-up. This switch works well in applications such as video & security, transportation, oil & gas, maritime, and mining. Comes with a 5 year warranty on defects in manufacturing or design. PRODUCT FEATURES - Compact housing - Unmanaged plug and play operation - Full IEEE 802.3 Compliance - 3 Ports: Two RJ45 ports, One fiber port - Extended Environmental Specifications - -40 C to 85 C Operating temperature - >1M+ Hours MTBF - Supports Full/Half Duplex Operation - LED link/activity status indication - Auto senses speed and flow - MDIX auto sensing cable - Redundant Power Inputs (10-30VDC) - Power inputs with surge protection - Intelligent routing of messages - Rugged Metal DIN-Rail Enclosure - Hazardous Locations (Class I, Division 2 and Zone 2) rated

fonctionne working very good condition The Sixnet SLX-3ES-2SC is a 3 port unmanaged copper to fiber industrial media converter. This SlimLine Plus SLX series switch is housed in an aluminum DIN-Rail enclosure, and features 4km multimode fiber optic cable with an SC style fiber connector. It has two 10/100BaseTX RJ45 ports and one 100BaseFX fiber port. It is built to run at an efficient speed for real-time operation, as well as to meet the demands of industrial networks. The plug and play capability means that the switch is ready to go right away, without needing a user set-up. This switch works well in applications such as video b'&' security, transportation, oil b'&' gas, maritime, and mining. Comes with a 5 year warranty on defects in manufacturing or design. PRODUCT FEATURES - Compact housing - Unmanaged plug and play operation - Full IEEE 802.3 Compliance - 3 Ports: Two RJ45 ports, One fiber port - Extended Environmental Specifications - -40 C to 85 C Operating temperature - b'>'1M+ Hours MTBF - Supports Full/Half Duplex Operation - LED link/activity status indication - Auto senses speed and flow - MDIX auto sensing cable - Redundant Power Inputs (10-30VDC) - Power inputs with surge protection - Intelligent routing of messages - Rugged Metal DIN-Rail Enclosure - Hazardous Locations (Class I, Division 2 and Zone 2) rated En savoir plus Collaboration commerciale.

CISCO CATALYST WS-C2960X-48LPS-L 48 -PORT 4 SFP GIGE POE MANAGED SWITCH  SPARE PART ONLY this product is a spare part sold alone as in the picture without cable without battery box or documentation only what you see in the photo a purchase verification request will be requested after the sale to confirm and unblock the shipment of the package - ces produits ont été retirés de serveur en retour de leasing fonctionnant à 100 % - these products were removed from server in return for leasing running at 100% PRODUCTS SOLD BY RESELLER WITH BILL PRODUIT VENDU PAR VENDEUR PROFESSIONNEL AVEC FACTURE condition:used/ tested occasion testé physical condition: good /état ok warranty provided:90 days / garantie de 3 mois

Exelvision EXL100 Old Computer Vintage Collection Collector. État : "Pour pièces détachées/ne fonctionne pas" Old french computer of year 1983 exelvision EXL100, without TV screen. With all câbles video péritel and power, wireless keyboard. Drawer doesn't close. Switch on off has to be repaired. Without basic cartridge Computer seems to work, look at the pictures. International shipping possible Ancien ordinateur exelvision exl100. Clavier à infrarouge. Tiroir ne fermant pas. Bouton on off à réparer. Vendu sans l'écran et sans cartouche. S'allume. Voir photos.

Glocalme U2 4G Wifi Pocket Hotspot. 1. GlocalMe U2 pocket Wi-Fi. The GlocalMe U2 pocket Wi-Fi is your Wi-Fi travel essential. It allows you to access the internet on a stable high-speed 4G network. You can travel with the U2 pocket Wi-Fi without paying extra data roaming costs in 140+ countries and regions around the world and the Wi-Fi hotspot can be shared across 5 devices. 2. 140+ Countries and Regions Covered SIM-free experience for your mobile at anytime, anywhere More in Service Coverage. 3. Powerful Design. -We prioritized a sleek and stylish design for the U2 pocket Wi-Fi. -It is lightweight at 151 grams and slim-cut at 127 mm x 65.7 mm x 14.2mm. -The U2 portable Wi-Fi comes in two chic colours: metallic gold and space grey.  4. Reliable Network. With CloudSIM technology, our U2 pocket Wi-Fi can automatically discover the best network coverage among our network service providers and switch to the operator that provides the strongest and most stable signal without any extra cost!  5. High-Speed 4G Network With powerful network coverage, The U2 pocket WiFi has a DL data roaming speed of 150 Mbps and a UL data roaming speed of 50 Mbps,  keeping you well-connected on your world travels. 6. Battery Life  We understand a long battery life is critical for your pocket Wi-Fi to keep you connected throughout your day. The GlocalMe U2 pocket Wi-Fi has a 13-hour battery life with continuous usage, so you don't need to worry that you'll run out of battery or Wi-Fi on your trip. 7. Portable Hotspot for up to 5 Devices Share your U2 pocket Wi-Fi with your travel companions or across your phone, laptop, and tablet—it provides a Wi-Fi hotspot for up to 5 devices, offering convenience and reliability.  8. Robust App for Easy Account Management The GlocalMe U2 pocket WiFi is effortless to manage as it is connected to our robust app, where you can manage the data plan, monitor data usage, top-up and more.

Glocalme U2 4G Wifi Pocket Hotspot. 1. GlocalMe U2 pocket Wi-Fi. The GlocalMe U2 pocket Wi-Fi is your Wi-Fi travel essential. It allows you to access the internet on a stable high-speed 4G network. You can travel with the U2 pocket Wi-Fi without paying extra data roaming costs in 140+ countries and regions around the world and the Wi-Fi hotspot can be shared across 5 devices. 2. 140+ Countries and Regions Covered SIM-free experience for your mobile at anytime, anywhere More in Service Coverage. 3. Powerful Design. -We prioritized a sleek and stylish design for the U2 pocket Wi-Fi. -It is lightweight at 151 grams and slim-cut at 127 mm x 65.7 mm x 14.2mm. -The U2 portable Wi-Fi comes in two chic colours: metallic gold and space grey. 4. Reliable Network. With CloudSIM technology, our U2 pocket Wi-Fi can automatically discover the best network coverage among our network service providers and switch to the operator that provides the strongest and most stable signal without any extra cost! 5. High-Speed 4G Network With powerful network coverage, The U2 pocket WiFi has a DL data roaming speed of 150 Mbps and a UL data roaming speed of 50 Mbps, keeping you well-connected on your world travels. 6. Battery Life We understand a long battery life is critical for your pocket Wi-Fi to keep you connected throughout your day. The GlocalMe U2 pocket Wi-Fi has a 13-hour battery life with continuous usage, so you don't need to worry that you'll run out of battery or Wi-Fi on your trip. 7. Portable Hotspot for up to 5 Devices Share your U2 pocket Wi-Fi with your travel companions or across your phone, laptop, and tablet—it provides a Wi-Fi hotspot for up to 5 devices, offering convenience and reliability. 8. Robust App for Easy Account Management The GlocalMe U2 pocket WiFi is effortless to manage as it is connected to our robust app, where you can manage the data plan, monitor data usage, top-up and more. En savoir plus Collaboration commerciale.

Cisco Systems ESW-520-24P-K9 Envois gratuit par Mondial Relay Réseau Type de Gestion: Entièrement géré The Cisco ESW 500 series, part of the Cisco Small Business Pro series, is a group of managed Ethernet switches that provide wire-speed Fast Ethernet and Gigabit Ethernet connectivity, integrated security, quality of service (QoS), and Power over Ethernet (PoE) to support all of your business network needs.  These switches integrate easily with Cisco Small Business Pro products as well as the Cisco Smart Business Communications System to provide a complete data, voice, video, and wireless networking solution for your business. With the Cisco ESW 500 series, you can take advantage of a proven network solution and a broad portfolio of high-performance, easy-to-manage switches that are designed and priced for small businesses. The Cisco ESW 500 series switches provide security, management, and other capabilities far beyond what unmanaged or "smart" switches can provide, without requiring you to configure features you don't need. The switches were designed to be part of the complete line of Small Business Pro networking and voice communications products that work together as part of proven, fully integrated, easy-to-use small business solution. Main Specification Product Description Cisco Small Business Pro ESW-520-24P - switch - 24 ports - Managed - rack-mountable Device Type Switch - 24 ports - Managed Enclosure Type Rack-mountable 1U Subtype Fast Ethernet Ports 24 x 10/100 (PoE) + 2 x combo Gigabit SFP + 2 x 10/100/1000 Power Over Ethernet (PoE) PoE Performance Switching capacity: 12.8 Gbps ¦ Forwarding performance (64-byte packet size): 9.5 Mpps MAC Address Table Size 8000 entries Remote Management Protocol: SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, SNMP 3, SNMP 2c, HTTP, HTTPS Features Flow control, Layer 2 switching, DHCP support, auto-negotiation, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, traffic shaping, DoS attack prevention, port mirroring, DiffServ support, Weighted Round Robin (WRR) queuing, Broadcast Storm Control, Multicast Storm Control, Unicast Storm Control, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS) Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s Power AC 120/230 V (50/60 Hz) Dimensions (WxDxH): 44 cm x 37.4 cm x 4.4 cm Weight: 2.2 kg !! N'hésitez pas à nous contacter pour plus de renseignement ou pour toute question. Faites nous une offre !! Visiter notre boutique et n'oubliez pas de nous ajouter a vos favoris ! !! N'hésitez pas à nous contacter pour plus de renseignement ou pour toute question. Faites nous une offre !!

Très bon état, fonctionne parfaitement, aucun pixel mort, pas de rayures, état irréprochable. Ecran Gamer de 27 pouces avec résolution Full HD (1920 x 1080) 16/9 Taux de rafraîchissement natif de 240 Hz Moniteur compatible avec la technologie NVIDIA G-SYNC (nécessite une carte graphique GeForce Série 10 Pascal ou GeForce Série 20 Turing) La technologie de moteur de couleur intégrée Black eQualizer (égaliseur de noirs) éclaire les scènes sombres sans surexposer les zones claires Le S Switch vous permet d'accéder facilement aux paramètres Ajustable en hauteur, inclinable et orientable Le contour spécialement conçu minimise toute distraction visuelle Bouclier amovible avec angle réglable: vous n'avez qu'à vous concentrer sur la victoire  Des couleurs vives et nuancées avec un contraste dynamique de 12 000 000:1 (natif 1000:1) Technologies Flicker Free (sans scintillement) et Low Blue Light (moins de lumière bleue nocive) Temps de réponse: 1 MS (gris à gris) Connectivité: DVI-DL / HDMI 2.0 / HDMI 1.4 / DP1.2 / prise casque / prise micro‎ + USB: Flux descendant x 2 / Flux ascendant x1 Possibilité de fixation murale (VESA 100 x 100 mm) Very good condition, works perfectly, no dead pixels, no scratches, perfect condition. 27 inch Gamer screen with Full HD (1920 x 1080) 16/9 resolution Native refresh rate of 240 Hz Monitor supports NVIDIA G-SYNC technology (requires GeForce 10 Series Pascal or GeForce 20 Series Turing graphics card) Built-in Black eQualizer color engine technology brightens dark scenes without overexposing light areas S Switch gives you easy access to settings Adjustable height, tilt and swivel Specially designed surround minimizes visual distraction Removable shield with adjustable angle - all you have to do is focus on winning  Vivid, nuanced colors with 12,000,000:1 dynamic contrast (native 1000:1) Flicker Free and Low Blue Light technologies (less harmful blue light) Response time: 1 MS (gray to gray) Connectivity: DVI-DL / HDMI 2.0 / HDMI 1.4 / DP1.2 / headphone jack / microphone jack + USB: Downstream x2 / Upload x1 Possibility of wall mounting (VESA 100 x 100 mm) Translated with www.DeepL.com/Translator (free version)

Linksys Max-Stream™ EA9500 AC5400 MU-MIMO Gigabit Wi-Fi Router & RE7000 AC1900+ WiFi Extender. The router and extender are used in good, working condition. Never registered with Linksys. FEATURES - EASY SETUP Installation is fast and easy. No CD required. - TRI-BAND WI-FI TECHNOLOGY Three bands that deliver the fastest combined Wi-Fi speeds to more devices. - MU-MIMO Latest Wireless-AC technology for simultaneously streaming and gaming on multiple devices. - SEAMLESS ROAMING Enables your device toautomatically switch to the strongest Wi-Fi signal as you move around your housewhen Max-Stream Routers are paired with Max-Stream Range Extenders.** MORE FEATURES SUPERCHARGED WORK AND PLAY WITH NEXT-GEN AC WI-FI ROUTER Designed as a dual-purpose home office and entertainment Wi-Fi router, the MAX-STREAM AC5400 MU-MIMO Gigabit Wi-Fi Router (EA9500) delivers Wi-Fi to multiple users on multiple devices at the same time and same speed. Featuring MU-MIMO (Multi-User, Multiple-Input, Multiple-Output) technology, this Next-Gen AC Router treats your devices--PCs, Smart TVs, streaming devices, smartphones--as if each has its own dedicated router. Working in your home office, you'll enjoy lag-free videoconferencing and fast file transfer, even while the rest of the family is streaming 4K or HD media in the living room.   ROOM-TO-ROOM WI-FI WITH SEAMLESS ROAMING The MAX-STREAM AC5400 MU-MIMO Gigabit Wi-Fi Router (EA9500) offers Seamless Roaming as you move around your home when linked with a MAX-STREAM Range Extender. With Seamless Roaming, your enabled wireless devices will automatically switch to the strongest Wi-Fi signal, so you won't have to manually connect to the router or range extender when you move from one room to another--or even to your garden.** This means that you can move freely throughout your home while video chatting or streaming videos without experiencing dropped calls or buffering. Pair a MAX-STREAM range extender such as the RE7000 with the AC5400 for more efficient home Wi-Fi that delivers stronger, more powerful Wi-Fi signal to all your devices. BACKED BY 3-YEAR WARRANTY AND TECH SUPPORT With its ability to perform double duty as a home office and entertainment router, the AC5400 merits a premium level of support. For this reason, it's backed not only by a three-year warranty, but also by a three-year tech support guarantee. POWERFUL PROCESSOR FOR SUPERCHARGED WI-FI If you're working in your home office, you can quickly download large files thanks to the MAX-STREAM's 1.8 GHz dual-core processor, which delivers the performance necessary for seamless videoconferencing and fast file transfer. The AC5400 is capable of handling multiple high-speed data streams at once--delivering faster Wi-Fi speeds to more devices. ADVANCED SECURITY FEATURES FOR A SECURE CONNECTION With the MAX-STREAM AC5400 MU-MIMO Gigabit Wi-Fi Router (EA9500), your work files, data, and home network information are safely connected with WPA/WPA2 encryption and an SPI firewall. SMOOTH 4K VIDEO STREAMING WITH BLAZING-FAST WI-FI SPEEDS The MAX-STREAM AC5400 offers three independent Wi-Fi bands that deliver extremely fast combined speeds of up to 5.3 Gbps.* Tri-Band technology delivers up to double the Wireless-AC performance of a dual-band router. High-bandwidth applications like videoconferencing and movie streaming are ideal for the two high-speed 5 GHz bands, while lower-bandwidth devices like older wireless-N and -G computers can utilize the 2.4 GHz band. HIGH-PERFORMANCE ANTENNAS FOR MAXIMUM COVERAGE The router features eight adjustable external antennas, which can be positioned for optimal performance. They provide powerful streams of data to your devices, ensuring complete Wi-Fi coverage throughout your home. Unlike the two or three data streams found on other routers, the AC5400 delivers four simultaneous streams per

dewabit Template Cisco CRS-16-PRP-12G Cisco CRS Série 16-Slot Performance Route Processor Manufacturer : Cisco Part Number : CRS-16-PRP-12G Condition : Used Product type : Switch 12GE Warranty : 30 days Ships : 2-3 business days Product Overview The Cisco® Carrier Routing System (CRS) Performance Route Processor is the next-generation route processor for the Cisco CRS-1, CRS-3, and CRS-X platforms. It is the first Cisco CRS Route Processor to offer the outstanding speed of the Intel® Xeon® quad-core processor. With 6 or 12 GB of double-data-rate 3 (DDR3) error-correcting code (ECC) memory, this performance route processor provides extremely fast routing performance at exceptional scale for the largest core and edge applications. The multicore design and speed allow you to achieve high scaling levels for applications such as Border Gateway Protocol (BGP) and Interior Gateway Protocols (IGP), Multiprotocol Label Switch Traffic Engineering (MPLS-TE), Cisco NetFlow, Lawful Intercept, Simple Network Management Protocol (SNMP), or Extensible Markup Language (XML) monitoring, without adversely affecting routing performance. The Cisco CRS Performance Route Processor (Figure 1) uses the award-winning Cisco IOS® XR Software, which is a fully modular, fully distributed internetwork operating system that uses a memory-protected, microkernel-based architecture and control-plane distribution that allow the system to scale. The performance route processor also includes a pair of solid-state drives (SSDs) for fast software installation and boot-up. Like the ECC memory, which protects against memory errors, the dual SSDs guard against drive failure by mirroring the boot partition that stores the Cisco IOS XR Software. Features and Benefits This route processor offers many advantages: - Powered by Cisco IOS XR Software - Designed for always-on operation, while scaling system capacity with a multichassis architecture - High-performance Intel Xeon quad-core CPU for fast multithreaded software processing - Redundant and fast SSD storage system - Supported across all the Cisco CRS 16-slot and multichassis form factors - External USB port for easy access to USB flash memory devices for software image loading and recovery - Optimized for peer-to-peer edge and core applications   What is shown on the pictures is what is sold USED IN GOOD WORKING CONDITION 1 199,00 EUR Buy now To watchlist Ask question EXPEDITION Expédition rapide En conformité avec le code de la consommation, tous nos envois sont faits en suivi: lettre suivie, colissimo, colissimo recommandé, chronopost ou transporteur express, selon le choix du client. Nous n'effectuons aucun envoi en contre-remboursement. Nous livrons dans le monde entier, à l'exclusion des pays non desservis par les sociétés de livraison. Les frais de port vous seront alors communiqués après validation de votre achat. Les frais de port indiqués ne se limitent pas au simple affranchissement, mais incluent également les frais annexes vendeurs tels que les consommables d'emballage, la manutention, l'assurance du colis... Ils sont non négociables. Merci de votre compréhension, et merci d'en tenir compte dans vos évaluations détaillées. Votre commande sera traitée par nos services dans un délai de 1 à 3 jours à réception de votre règlement. A cela, s'ajoute ensuite le délai postal moyen de 48h pour la France Métropolitaine. Réserves à la réception de votre colis: Nous vous invitons vivement à bien vérifier l'état de votre colis à sa réception. En cas de doutes, émettez OBLIGATOIREMENT des réserves à réception sur le bordereau de la poste ou du transporteur, faute de quoi, si l'article est endommagé, nous n'aurons aucun recours possible auprès des assurances de transport souscrites. Nous ne pourrons alors pas prétendre à indemnisation, et ne pourrons donc pas accepter votre réclamation. Retrait gratuit

This is Viki 2.0 Graphic LCD. Original version Viki can be found here. ViKi 2.0 is an easy to use LCD control panel interface designed for 3D printers and CNC machines but can also be used for other micro controller projects. It allows your 3D printer to operate without a PC always connected and provides visual indication of things like temperature and peripheral activity. It can also be used on most micro controller / Arduino projects that require a display and control interface. Give that project of yours a professional looking panel! ViKi stands for Visual Kinetic control Interface. Viki 2.0 sports a 3" Graphic LCD with white pixels on black background, a micro SD card slot and rotary encoder with push switch. Connects via SPI. Dual color ring light to indicate heating or cooling of printer hotend or heatbed. Uses U8Glib Library for Arduino (Marlin and Repetier), and natively supported in Smoothieware. Works with Smoothieware, Marlin and Repetier (coming). Tested on Azteeg X3, X3 PRO, X5 mini, Rambo, RAMPS, and will work with most current controller boards. Printrboard users would need the current release of Marlin for the Viki 2 to work, Modifying Printrbot supplied Marlin Firmware will not fit in the Printrboard's memory space.. (Yellow printed stand not included in kit) Features: - 3 inch high contrast Graphic LCD - SPI communication to host micro-controller - microSD slot with card detect, push-push card insertion - Rotary Encoder with easy to hold knob - Pause/Reset Button - 2 Color ring indicator (Red/Blue, independent control) - Software configurable contrast setting - Glossy poly-carbonate overlay - on-board buzzer What's in the box: - Viki 2.0 LCD - Selected Cable when ordering

- - Store category Sign Up Now ! You may also like Senza tasse Geeetech Reprap Stampanti 3D Prusa i3 Pro B DIY MK8 Product Description Our Pro B can support auto leveling, but need buy our 3DTouch Auto bed Leveling Sensor, click following link to buy!  https://www..co.uk/itm/282153272935 _______________________________________________________________________________________________ Pls note that our Printer will come as a DIY kit, and with 3 meters starter filament. Need more filament? Pls click here to buy: https://www..com/itm/271020503268   Here is a video of using the 3DTouch Auto Leveling Sensor on Geeetech Prusa I3 pro B 3d printer.     Our Printer has been updated! All Metal parts replaced printed parts! ___________________________________________________________________________ *A letter to our buyers* Thank you so much for buying our printers, if you don't know how to use our printer, pls refer the information on our wiki, Quick Start. If you need technical support, pls try our forum, Geeetech Forum. Thanks a lot! ___________________________________________________________________________ Delivery Details 1.This 3D Printer will be sent from Belguim, SO don't need to pay customs taxes to European address. If your address are a remote areas, you need to pay extra fees, you can check whether your shipping addres is remote or not on the following link, https://raslist.dhl.com/jsp/first.jsp 2.Please confirm you are putting a correct and complete shipping address here.You are resposible for extra charge if your package been returned because of wrong address. 3. Pls note that if the address is Canary Islands, we will send from China, so you might need pay taxes.   4. Our printer can be shipped to worldwide, pls check following link if your shipping address is not belonged to European. https://www..ca/itm/272224036031       Package list: The Printer will come as a unassembled kit, without a filament. Spring washer M10 6 20 Screw locking ring Φ8 8 21 Screw M2.5x8mm 2 22 Screw M2.5x16 mm 4 23 Screw M3x6mm 25 24 Screw M3x8mm 2 25 Screw M3x10mm 15 26 Screw M3x12mm 24 27 Screw M3x16mm 32 28 Screw M3x20mm 32 29 Screw M3x30mm 14 30 Screw M3x35mm 5 31 Screw M3x40mm 5 32 Screw M4x6mm 4 33 Screw M4x25mm 2 34 Bolts Countersunk head bolt M3x16mm 5 35 Spring 5 36 Linear Bearings LM8UU 4 37 Linear Bearings LM8LUU 2 38 Linear Bearings LMH8LUU 2 39 Timing Belts L1=775(Y axis) 1 40 Timing Belts L1=860mm(X axis) 1 41 Bearing holder Metal plate 2 42 Belt mount Aluminium plate 1 43 Couplings 5-8mm 2 44 Pulleys 20 tooth d5mm 2 45 Driving wheel 2 46 Ball bearing MR84zz 4 47 Spacer With Aircraft type end 4 48 Dovetail clamp 4 49 Heat sink 9*10*5mm 4 50 Sticker 1 51 Belt bracket 1 52 Knob For LCD 1 53 Fan 40x40x10mm 12V 1 54 DuPont cable 3-Pin Male-Female 1 55 USB Cord A-B 1 56 End stop blue/red/black 3 57 3D Power Cable 3*0.75 Square mm Switch Line 1 58 Power Cable Control board power input 1 59 Heat bed set With heating wire and Thermo-wire 1 60 Borosilicate glass 1 61 Power supply Input: 115V/1.5A 230V/0.75A Output DC12V/0-15A 1 62 Stepper motor 4 63 Extruder MK8 extruder 1 64 Control board GT2560+4A4988 1set 65 LCD 2004

- - Store category Sign Up Now ! You may also like Senza tasse DE Venditore Geeetech Reprap Stampante 3D Prusa i3 Acrilico DIY Kit Product Description Our Pro B can support auto leveling, but need buy our 3DTouch Auto bed Leveling Sensor, click following link to buy!  https://www..co.uk/itm/282153272935 _______________________________________________________________________________________________ Pls note that our Printer will come as a DIY kit, and with 3 meters starter filament. Need more filament? Pls click here to buy: https://www..com/itm/271020503268       Note: If your address belong to France, Italy, Spain, the printer will ship from Belgium; other EU countries ship from Germany.         Here is a video of using the 3DTouch Auto Leveling Sensor on Geeetech Prusa I3 pro B 3d printer.     Our Printer has been updated! All Metal parts replaced printed parts! ___________________________________________________________________________ *A letter to our buyers* Thank you so much for buying our printers, if you don't know how to use our printer, pls refer the information on our wiki, Quick Start. If you need technical support, pls try our forum, Geeetech Forum. Thanks a lot! ___________________________________________________________________________     Package list: The Printer will come as a unassembled kit, without a filament. Spring washer M10 6 20 Screw locking ring Φ8 8 21 Screw M2.5x8mm 2 22 Screw M2.5x16 mm 4 23 Screw M3x6mm 25 24 Screw M3x8mm 2 25 Screw M3x10mm 15 26 Screw M3x12mm 24 27 Screw M3x16mm 32 28 Screw M3x20mm 32 29 Screw M3x30mm 14 30 Screw M3x35mm 5 31 Screw M3x40mm 5 32 Screw M4x6mm 4 33 Screw M4x25mm 2 34 Bolts Countersunk head bolt M3x16mm 5 35 Spring 5 36 Linear Bearings LM8UU 4 37 Linear Bearings LM8LUU 2 38 Linear Bearings LMH8LUU 2 39 Timing Belts L1=775(Y axis) 1 40 Timing Belts L1=860mm(X axis) 1 41 Bearing holder Metal plate 2 42 Belt mount Aluminium plate 1 43 Couplings 5-8mm 2 44 Pulleys 20 tooth d5mm 2 45 Driving wheel 2 46 Ball bearing MR84zz 4 47 Spacer With Aircraft type end 4 48 Dovetail clamp 4 49 Heat sink 9*10*5mm 4 50 Sticker 1 51 Belt bracket 1 52 Knob For LCD 1 53 Fan 40x40x10mm 12V 1 54 DuPont cable 3-Pin Male-Female 1 55 USB Cord A-B 1 56 End stop blue/red/black 3 57 3D Power Cable 3*0.75 Square mm Switch Line 1 58 Power Cable Control board power input 1 59 Heat bed set With heating wire and Thermo-wire 1 60 Borosilicate glass 1 61 Power supply Input: 115V/1.5A 230V/0.75A Output DC12V/0-15A 1 62 Stepper motor 4 63 Extruder MK8 extruder 1 64 Control board GT2560+4A4988 1set 65 LCD 2004 LCD2004 1 66 Nylon ties 30 67 Coil 3M 1 Acrylic Kits(8mm) A1 XZ frame I3-01 1 A2 Left side frame I3-02 1 A3 Right side frame I3-03 1 A4 Z motor fixed plate I3-04 1 A5 Z motor fixed plate I3-05 1 A6 Z motor support plate I3-06 3 A7 Z motor support plate I3-07 1 A8 Z top mount I3-08 2 A9 Front support plate A of screw and smooth rod I3-09 1 A10 Front support plate B of screw and smooth rod I3-10 1 A11 Rear Support plate A of screw and smooth rod I3-11 1 A12 Rear support plate B of screw and smooth rod I3-12 1 A13 Y motor fixed plate I3-13 1 A14 Y plate form connecting p

- - - - - - - - - - - - - - - Store category Sign Up Now ! You may also like Geeetech Prusa I3 Imprimante 3D Acrylic Support 5 Filaments MK8 DIY Product Description     ____________________________________________________________________________________________  *A letter to our buyers* Thank you so much for buying our  printers, if you don't know how to use our printer, pls refer the information on our wiki,Quick Start.    If you need technical support, pls try our forum, Geeetech Forum.  Thanks a lot! ___________________________________________________________________________         Package list: There is unassembled kits without filament, if you want to add some, please feel free to contact us, thanks!                                                                                                                                                                       Spring washer M10 6 20Screw locking ringΦ88 21ScrewM2.5x8mm2 22ScrewM2.5x16 mm4 23ScrewM3x6mm25 24ScrewM3x8mm2 25ScrewM3x10mm15 26ScrewM3x12mm24 27ScrewM3x16mm32 28ScrewM3x20mm32 29ScrewM3x30mm14 30ScrewM3x35mm5 31ScrewM3x40mm5 32ScrewM4x6mm4 33ScrewM4x25mm2 34BoltsCountersunk head bolt M3x16mm5 35Spring 5 36Linear BearingsLM8UU4 37Linear BearingsLM8LUU2 38Linear BearingsLMH8LUU2 39Timing BeltsL1=775(Y axis)1 40Timing BeltsL1=860mm(X axis)1 41Bearing holderMetal plate2 42Belt mountAluminium plate1 43Couplings5-8mm2 44 Pulleys20 tooth d5mm2 45Driving wheel 2 46Ball bearingMR84zz4 47SpacerWith Aircraft type end4 48Dovetail clamp 4 49Heat sink9*10*5mm4 50Sticker 1 51Belt bracket 1 52KnobFor LCD1 53Fan40x40x10mm 12V1 54DuPont cable3-Pin Male-Female1 55USB CordA-B1 56End stopblue/red/black 3 573D Power Cable3*0.75 Square mm Switch Line1 58Power CableControl board power input1 59Heat bed setWith heating wire and Thermo-wire1 60Borosilicate glass210mmx210mmx3mm1 61Power supplyInput: 115V/1.5A 230V/0.75A Output DC12V/0-15A1 62Stepper motor 4 63Extruder MK8 extruder1 64Control boardGT2560+4A49881set 65LCD 2004LCD2004 1 66Nylon ties 30 67Coil3M1 Acrylic Kits(8mm) A1XZ frameI3-011 A2Left side frameI3-021 A3Right side frameI3-031 A4Z motor fixed plateI3-041 A5Z motor fixed plateI3-051 A6Z motor support plateI3-063 A7Z motor support plateI3-071 A8Z top mountI3-082 A9Front support plate A of screw and smooth rodI3-091 A10Front support plate B of screw and smooth rodI3-101 A11Rear Support plate A of screw and smooth rodI3-111 A12Rear support plate B of screw and smooth rodI3-121 A13Y motor fixed plateI3-131 A14Y plate form connecting plateI3-142 A15Y platform support plateI3-151 A16Y bearing limit blockI3-164 A17Acrylic washerFix the LCD panel4 A18LCD2004 frame 1 A19LCD2004 frame holder 2 Metal Parts M1X-axis left endleft1 M2X-axis right endright1 M3Print bracketPI3-S071 M4Bearing BracketPI3-084 M5Extruder bracketPI3B-S011 Free add-on F1Ejector pin 1 F2File 1 F3Tool kitUniversal screwdriver1 F4Filament holder set 1 F5Starter filamentAbout 3 meters1                                                                                                                                 /   Payment Delivery details Terms of sales About us Contact us Payment 1.We accept PayPal only.

Sapphire Carte graphique AMD Radeon HD6870 The Radeon HD 6870s take Eyefinity technology while improving it, now allowing the use of up to 4 screens on a single graphics card! Watch a video while surfing the internet without having to switch between windows, or increase your productivity by having several documents in front of you at the same time. Configuring displays is very easy with the Catalyst Control Center.  Thanks to the power inherited from the Radeon HD 5000s, the Radeon HD 6870s benefit from a major innovation in terms of video-game immersion: stereoscopic 3D. Thanks to a compatible screen you can literally immerse yourself in the heart of the action. And thanks to Eyefinity technology, you can even play in stereoscopic 3D on 3 screens.  Fully compatible with DirectX 11 like the previous series, the AMD Radeon HD 6800 series graphics cards benefit from an improvement in tessellation processing, which allows them to be more efficient while offering superior graphics rendering.       Marque Numéro du modèle de l'article 11179-09-20G séries 11179-09-20G Garantie constructeur Garantie Fabricant: 2 ans Vitesse du processeur 900 MHz Taille du disque dur 1024 MB Résolution 2048 x 1536 Pixels Marque chipset graphique AMD Fréquence du GPU 900 MHz Description de la carte graphique Radeon HD 6870 GPU Radeon HD 6870 Type de mémoire vive (carte graphique) GDDR5 Nombre de ports HDMI 1 Type de connecteur Sortie TV Dimensions de l'article L x L x H 40 x 25 x 6 centimètres Poids du produit 2.07 Livres Divers Compatibilité DirectX 3D, Compatibilité Open GL       Will ship worldwide once payment is cleared. Shiping costs will depend on locatiosn,feel free to ask any question.

Drobo 5D3 - empty - DAS for 5 hard drives - good condition. État : "Occasion" I'm selling my drobo to switch to a bigger enclosure. I used it mainly for long term storage, to store my video files.  I was switching it on once per week to do a backup of my setup, and copying / dumping video rushes from shootings.   Bought it in 2018 in France. Warranty ended in april 2020. Stayed in a non smoker room. Good condition. Sold with original box & invoice, but without drives. 5-bay raid enclosure Thunderbold 3 & USB C

Répéteur WIFI NETGEAR N300   WN3100RPv2 Etat neuf. Emballage fourni (Carton un petit peu abîmé dans un angle) Se branche dans une prise murale. Récupère le Wifi de la pièce et le renvoi dans un plus grand rayon et renforce le signal dans les zones difficiles d’accès. Compatible 802.11 GHz b/g/n 2,4 GHz Configuration sans CD Sécurisation par WPS Application smartphone pour paramétrer en détails. Interrupteur Marche/arrêt Port Ethernet vers WIFI pour connecter une TV un ordi, une console. Prise supplémentaire disponible en branchant un appareil dans le boîtier.   Voyant plat vert :Ce voyant indique la connexion entre le répéteur et le routeur ou le point d'accès. Vert continu. Connexion optimale. Orange continu. Bonne connexion. Rouge continu. Mauvaise connexion. Eteint. Aucune connexion. Voyant vert haut : Lien client Ce voyant indique la connexion entre le répéteur et un ordinateur ou appareil WiFi. Vert continu. Connexion optimale. Orange continu. Bonne connexion. Rouge continu. Mauvaise connexion. Eteint. Aucune connexion. Voyant d'alimentation Orange continu. Le répéteur est en cours de démarrage. Vert continu. Le répéteur est sous tension. Désactivé. Le répéteur est hors tension. Voyant WPS Vert continu. La sécurité WiFi est activée (WPA ou WPA2). Vert clignotant. Une connexion WPS est en cours d'établissement. Eteint. La sécurité WiFi n'est pas activée. Remarque: si la flèche lumineuse routeur ou client clignote, reportez-vous à la section Localisation du meilleur emplacement à la page 10. Si aucune flèche lumineuse n'est allumée, le répéteur se trouve au bon endroit.   Dimensions du colis ::150 × 180 × 10 cm (L x H x P) Poids: 320 grammes Prix neuf généralement constaté: 39€ Prix ferme non négociable:28 €  A retirer sur place à Juvignac. Ou expédition possible à vos frais: Colissimo : Rajoutez  6,35 € soit  34,35€ livré. Mondial Relay : Rajoutez 3,79 € soit 31,79 € livré. Pour tout renseignement:  Thierry POUGET   NETGEAR N300 WN3100RPv2 WIFI Repeater Brand new condition. Packing provided (Cardboard a little bit damaged in a corner) Plugs into a wall outlet. Recovers the Wifi from the room and sends it back to a larger radius and strengthens the signal in hard-to-reach areas. Compatible 802.11 GHz b/g/n 2.4 GHz Configuration without CD WPS security Smartphone application for detailed settings. On/Off switch Ethernet to WIFI port to connect a TV, a computer, a console. Additional socket available by plugging a device into the box.   Green flat light: This light indicates the connection between the repeater and the router or access point. Solid green. Optimal connection. Solid orange. Good connection. Solid red. Bad connection. Off. No connection. High green light: Client Link This light indicates the connection between the repeater and a computer or WiFi device. Solid green. Optimal connection. Solid orange. Good connection. Solid red. Bad connection. Off. No connection. Power indicator Solid orange. Repeater is starting up. Solid green. Repeater is on. Off. Repeater is off. WPS indicator Steady green. WiFi security is enabled (WPA or WPA2). Blinking green. A WPS connection is being established. Off. WiFi security is not enabled. Note: If the router or client light arrow is blinking, refer to Locating the best location on page 10. If no light arrow is illuminated, the repeater is in the correct location.   Package dimensions: 150 × 180 × 10 cm (W x H x D) Weight: 320 grams New price generally found: 39€. Non-negotiable firm price:28 €. For more information:  Thierry POUGET