Voltage input

Set of Two Voltage Preamplifiers 2/4/6 I am selling a set of this two units by Physical Acoustics Corporation 2/4/6 voltage preamplifiers, a great solution for a variety of sensors, switch selectable gain, single-ended or differential sensors. New Stored as new, B stock, in very good condition. Description: The 2/4/6 preamplifier has been designed for use with all AE systems available powered via the BNC output signal. It comes with a gain of 20/40/60 dB (switch selectable) and works with a single terminated or differential sensor. Plug-in filters provide the user with flexibility to optimize sensor selectivity and noise rejection. These filters are provided in the low pass (LP), high pass (HP) and band pass (BP) configurations, and offers consistent insertion loss for easy filter exchange without the need for recalibration. Automatic sensor test (AST) is standard. This option provides the sensor with ability to characterize one's own condition and to send a simulated acoustic emission wave that other sensors can Features: -Selectable gain 20/40/60 -Wide dynamic range b'>' 90 dB standard -Low noise b' - Large output signal 20 Vpp in 50? -Single BNC power supply/signal or optional separate power supply/power supply BNC signal - Plug-in filters (uses the same filter as the SPARTAN 2000) - High input impedance - Standard automatic sensor test ï Input protection Electrical specifications: -Selectable gain: 20/40/60 dB + 0.5% dB -Input impedance: 10KO // 15pF -Power requirement: 18-28V DC -Operating current: 30 mA (with AST installed) -28 mA (without AST installed) - Dynamic range: 80 dB (using R15 sensor) 90dB (50O input Environmental specifications: - Temperature: -40 C to +65 C En savoir plus

The  EMW  VCF  DIODE  is a specially designed 18db/oct. diode array low-pass resonant filter.  It has a unique sound and a distinctive sonic character.  This module  has a  resonance level switch to better adapt to your patch,  input audio mixer with two channels with individual Input level control,  and two modulation inputs with individual input  level control. - Eurorack (3U) form factor - 10 HP width - 2-channel audio mixer with audio level controls - Two Modulation inputs with level control - Two output connectors - Low noise  circuit design - Power consumption: +12V [14mA]  /  -12V [14mA] - Connectors: 3.5mm - Weight 141g - Depth: 50mm

VIDEOPROJECTEUR SHARP XGNV6XE LCD /PSN IL PRESENTE UN DEFAUT ? LE CONTOUR DE L'IMAGE EST JAUNE  COMME UNE TACHE JAUNE QUI ENROBE LE CONTOUR ???? SINON FONCTIONNE PARFAITEMENT ENTREES INFORMATIQUE/S VIDEO:RGB/COMPOSANTE/COMPOSITE VENDU TEL QUE SUR LA PHOTO AVEC SON CABLE SECTEUR VENDU TEL QUE EN L'ETAT Video system Display method LCD panel Lens Projection lamp Contrast ratio Video input signal S-video input signal Component input signal Horizontal resolution Audio output Computer RGB input signal Pixel clock Vertical frequency Horizontal frequency Computer control signal Speaker system Rated voltage Input current Rated frequency Power consumption Operating temperature Storage temperature Cabinet I/R carrier frequency Laser pointer of remote control Dimensions (approx.) Weight (approx.) Supplied accessories Replacement parts LCD Projector XG-NV6XE PAL/SECAM/NTSC 3.58/NTSC 4.43/DTV 480P/DTV 720P/DTV 1080I LCD panel ô�°… 3, RGB optical shutter method Panel size: 33 mm (1.3ô�°Š) (20.0 [H] ô�°… 26.6 [W] mm) Display method: Translucent TN liquid crystal panel Drive method: TFT (Thin Film Transistor) Active Matrix panel No. of dots: 786,432 dots (1,024 [H] ô�°… 768 [V]) 1–1.3ô�°… zoom lens, F1.7–2.3, f ô�°� 49.1–63.8 mm 150 W UHP lamp 250:1 RCA Connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75 Ω terminated RCA Connector: AUDIO, 0.5 Vrms more than 22 kΩ (stereo) 4-pin mini DIN connector Y (luminance signal): 1.0 Vp-p, sync negative, 75 Ω terminated C (chrominance signal): Burst 0.286 Vp-p, 75 Ω terminated BNC Connector (INPUT 1) Y: 1.0 Vp-p, sync negative, 75 Ω  terminated PB: 0.7 Vp-p, 75 Ω  terminated PR: 0.7 Vp-p, 75 Ω  terminated 520 TV lines (video input), 750 TV lines (DTV 720P input, Dot by Dot) 2 W ô�°† 2 W (stereo) 15-PIN MINI D-SUB CONNECTOR (INPUT 1, 2), 5 BNC CONNECTOR (INPUT 1): RGB separate/composite sync/sync on green type analog input: 0–0.7 Vp-p, positive, 75 Ω terminated STEREO MINIJACK: AUDIO, 0.5 Vrms, more than 22 kΩ (stereo) HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative) or composite sync (Apple only) VERTICAL SYNC. SIGNAL: Same as above 12–230 MHz 43–200 Hz 15–126 kHz 9-pin mini-DIN male connector (RS-232C Input Port) 1 31â�„32ô�°Š (5 cm) round ô�°… 2 AC 110–120/220–240 V 2.4 A/1.2 A 50/60 Hz 265 W ô�°†5°C to ô�°†40°C ô�°‡20°C to ô�°†60°C Plastic 38 kHz Wave length: 650 nm / Max. output: 1 mW / Class II Laser Product 261 ô�°… 129 ô�°… 356 mm (W ô�°… H ô�°… D) (main body only) 261 ô�°…146 ô�°… 411.5 mm (W ô�°… H ô�°… D) (including adjustment feet and projecting parts) 7.2 kg

Features: 1. 2.4G technology, FHSS 67 channels frequency-hopping spread spectrum, highly resistant to anti-jamming. 2. Receiver response time is 2ms, ensuring a fast response and better control. 3. Smooth and highly sensitive to control inputs and stable at distances from 200-300m. 4. Compatible with a variety of vehicles, suitable for RC cars, RC boats and RC tanks. 5. With brake and fail safe, out of control protection function. 6. Each of the 3 channels can be set respectively, supporting mixed control of 1 and 2 channels. 7. Voltage range of the transmitter. 4.8V-6V voltage warning: 8. Voltage range of the receiver. 3.3V-6V, working current 30mA, supports high voltage servos. Specifications of Transmitter: Channels: 4 Mode Type: RC Car Boat Tank RF Power: Less than 20dbm Response Time:10s-12ms Control Distance: about 200-300m Voltage Input: 4.8V-6Vor 1.5AAA*4 Low Voltage Warning: 4.5V Net Weight: 260G Size: 180*80*145mm Specifications of Receiver: Channels: 4 Frequency: 2.4GHz Size:16*18*12mm En savoir plus Collaboration commerciale.

Amplificateur de puissance Hypex NCore NC252MP boitier Ghentaudio. État : "Occasion" utilisé quelques dizaines d'heures. Montage effectué en Mars 2021. Boitier Ghentaudio: https://www.ghentaudio.com/kit/2180a-2.html Module HYpex NCore NC252MP: https://www.hypex.nl/product/nc252mp-oem/76 SpecsNC252MP: Technique NCore Power (2Ω) 2x 180W (not advised to use in BTL) Power (4Ω) 2x 250W (1x 400W in BTL) Power (8Ω) 2x 150W (1x 500W in BTL) Channels 2 Weight 575g Dimensions mm 170*105*42 Mains voltage input 230V / 115V Automatic input voltage selection Yes Connectique XLR. Cordon d'alimentation EU Je vends avec, un DAC SMSL SU-8 v2 avec réglage de volume et sortie RCA/XLR, telecommande : https://www.smsl-audio.com/portal/product/detail/id/692.html Matériel parfaitement fonctionnel, sera emballé dans carton d'origine des 2 appareils + double carton soigné. Ensemble compact et très performant, voir le test du DAC sur AudioScienceReview: https://www.audiosciencereview.com/forum/index.php?threads/smsl-su-8-version-2-balanced-dac.5433/ et j'offre pour connecter ces 2 appareils, des câbles Sommer Cable XLR (voir dernière photo): Sommer cable Shop Nf-phonocable stereo pair Aqua Blue, 2 x 0,35 mm² EMC Special XLR EMC Special XLR, NEUTRIK 1,00m purchase

Following a failure of my subwoofer's Bowers b'&' Wilkins DB4S internal DSP unit, I'm putting the Hypex NC502MP internal amplification module up for sale. I've only used it for Hifi and it's in very good condition. it's mounted on an aluminum radiator Power (2Ω): 2 x 450W (BTL 2Ω is not supported) Power (4Ω): 2 x 500W (1 x 1000W in BTL) Power (8Ω): 2 x 350W (1 x 1200W in BTL) Channels: 2 Family: Mains Powered NCORE® Family Automatic input voltage selection: Yes Mains voltage input: 230V / 115V En savoir plus Collaboration commerciale.

Transmetteur FM voiture sans fil Bluetooth Lecteur MP3 2 Kit mains libres SH Specification: Colour: Black Bluetooth version: 5.0+ EDR Bluetooth sound processing: A2DP Bluetooth microphone effective distance: 0.5-2M Bluetooth transmission distance: 10 M Display: 1.44 TFT color screen TF & U Disk: 128 GB Music format: MP3 / WMA FM transmitting frequency: 87.5-108.0MHz Working voltage: 12-24V Working temperature: 0-40℃ Distortion: 60db Input and output: AUX USB charging: QC3.0 fast charge Product size (single machine) / weight: 10*9.5*5CM Packing size (full set) / weight: 12.8*11*6.4CM (Due to manual measurement, there will be an error of 1-3cm.) Feature: 1.Bluetooth version 5.0, support Bluetooth call, Bluetooth music transmission, caller ID. 2.Support TF card / U disk play and card reader function, support MP3/WMA format music. 3.QC3.0 fast charging can charge externally expanded portable device functions, suitable for all mobile phones, tablets and other electronic products. 4.1.44 inch TFT true color screen, display frequency, playback mode, EQ sound effect mode, read data, music name and display voltage. 5.Support one-key menu to set language, playback mode, and sound effect mode. 6.Support power-off memory and folder playback functions. 7.AUX input and output function. 8.One key switch machine, pause, answer, up and down key functions. 9.FM transmitting frequency 87.5-108.0MHZ. Package Including: 1pc * Bluetooth FM 1pc * Use Manual(No retial package) Payment Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. Shipping Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Terms of Sale Si vous n'êtes pas satisfait de votre achat, contactez-nous sans hésiter. Les articles peuvent être retournés dans 30 jours en état inutilisé, nous effectuerons un échange et un remboursement une fois que nous aurons reçu l'objet. Gardez les étiquettes entières et les éléments propres sans saveur, si non nous n'accepterons pas le retour. About US Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Specification: Colour: Black Bluetooth version: 5.0+ EDR Bluetooth sound processing: A2DP Bluetooth microphone effective distance: 0.5-2M Bluetooth transmission distance: 10 M Display: 1.44 TFT color screen TF & U Disk: 128 GB Music format: MP3 / WMA FM transmitting frequency: 87.5-108.0MHz Working voltage: 12-24V Working temperature: 0-40℃ Distortion: 60db Input and output: AUX USB charging: QC3.0 fast charge Product size (single machine) / weight: 10*9.5*5CM Packing size (full set) / weight: 12.8*11*6.4CM (Due to manual measurement, there will be an error of 1-3cm.) Feature: 1.Bluetooth version 5.0, support Bluetooth call, Bluetooth music transmission, caller ID. 2.Support TF card / U disk play and card reader function, support MP3/WMA format music. 3.QC3.0 fast charging can charge externally expanded portable device functions, suitable for all mobile phones, tablets and other electronic products. 4.1.44 inch TFT true color screen, display frequency, playback mode, EQ sound effect mode, read data, music name and display voltage. 5.Support one-key menu to set language, playback mode, and sound effect mode. 6.Support power-off memory and folder playback functions. 7.AUX input and output function. 8.One key switch machine, pause, answer, up and down key functions. 9.FM transmitting frequency 87.5-108.0MHZ. Package Including: 1pc * Bluetooth FM 1pc * Use Manual(No retial package) PAYMENT Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. SHIPPING Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Terms of Sale Si vous n'êtes pas satisfait de votre achat, contactez-nous sans hésiter. Les articles peuvent être retournés dans 30 jours en état inutilisé, nous effectuerons un échange et un remboursement une fois que nous aurons reçu l'objet. Gardez les étiquettes entières et les éléments propres sans saveur, si non nous n'accepterons pas le retour. ABOUT US Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Le 05-déc.-20 à 09:24:05 Paris, le vendeur a ajouté les informations suivantes:

Rare paire Luxman C300 et M300:Amplificateur et préamplificateur (avec phono). État : "Occasion" En excellent état de fonctionnement, notez qu' il faudra remplacer une ampoule du voyant Led  "classe A". Voltage 220V. Les deux appareils sont visibles chez Jefferson Hifi à Pérouse où je les ai déposés. Livraison possible en France, en Europe,etc nous consulter pour les frais d'envoi internationaux. Le M300 a été produit en même temps que la série C300. Je crois qu’il n’en a été produit que 2000 dans le monde. C’est non seulement une paire de collection, mais le haut de gamme des luxman des années 1980. Ils sont les dernières combinaisons pré/ampli, à avoir été fabriquées sans implication de Alpine(qui a ensuite  modifié sérieusement la qualité Luxman  hélas.). ils ont été primés "produit de l'année" au début des années 80.  Le M300 se laisse utiliser soit en classe A, où il développe 2x42 w sous 8 ohms en classe A, ou alors 172w en classe AB sous 8 ohms. Comme toujours chez Luxman, on peut espérer une dizainede watts supplémentaires dans chaque modes, vu qu'ils utilisent unsystème de mesure très strict sur leurs fiches techniques. Il faut surtout savoir qu’il ne faut basculer de classe AB en classe A que à l’arrêt, en redémarrage à froid.  Voici  les caractéristiques techniques (https://audio-database.com/LUXMANALPINE-LUXMAN/amp/m-300-e.html) et https://audio-database.com/LUXMANALPINE-LUXMAN/amp/c-300-e.html 1)Préampli C300: Frequency response: 0.5Hz to 140kHz   Total harmonic distortion: 0.005% Input sensitivity: 0.09mV (MC), 2mV (MM), 140mV (line)      Signal to noise ratio: 80dB (MM), 100dB (line) Output: 140mV (line), 1V (Pre out), 20V (Pre out Max)  Dimensions: 478 x 163 x 384mm     Weight: 9kg 2)amplificateur M300 Form Duo beta plusX poweramplifier Succession effectiveoutput (20Hz - 20kHz, both channel simultaneous operation) Class-A: 40W+40W (8ohms) AB class: 270W+270W (4ohms) 170W+170W (8ohms) THD (8 ohms) 20Hz- 20kHz-3dB Class-A: 0.005% or less AB class: 0.005% or less Cross modulationdistortion (8 ohms) 60Hz: 7kHz=4:1, -3dB Class-A: 0.005% or less AB class: 0.005% or less Output bandwidth Class-A: 10Hz-100kH-3dB(0.015% of distortion) AB class: 10Hz - -100kHz three dB(0.04% of distortion) Frequency characteristic 10hz-100kHz-1dB (aClass-A and AB class) Input sensitivity Class-A: 0.45V ABclass: 1V Input impedance 50kohm (a Class-A and ABclass) SN ratio (IHF-Acorrection) Class-A: 115dB ABclass: 120dB Remains noise (IHF-Acorrection) 30 microvolts (a Class-Aand AB class) Dumping factor 120 (1kHz, 8 ohms, aClass-A, and AB class) Protection network DC drift detectionspeaker protection network Overcurrent detection amplifierprotection network Attachment Circuit operationswitchpoint (indicator) Peek indicator Inputattenuator Headset jack Speaker-off switchpoint(indicator) Line phase sensor Supply voltage AC100V, 50Hz/60Hz Power consumption (Electrical Appliance and Material Control Law) Class-A: 420W ABclass: 430W Dimensions Width 478x height 214xdepth of 484mm Weight 30kg Stereo power amplifier which adopted the Duo beta plusX circuitry. In order to control NFB of an amplifier circuitry appropriately, the Duo beta circuitry was developed and it is adopted as M-300. After this makes amplifier to the extent that it is used also from a nakedness property as it was, it adds proper-quantity NFB and DC servo as finish of a tone quality, and is suppressing the transitional distortion of a supression of play sound, TIM, etc. by superfluous NFB etc. Furthermore, in M-300, the thought of a suitable control is introduced also into a power circuit, and it is considered as the power-source Duo beta plusX. At plusX, the stability of a comfortable tone quality and an operation is reconciled because the bottom gives controlling force calmly on the assumption that a generous power-source part. M-300 can change and use a Class-A and AB class. The Class-A operation has a structure which amplifies a signal wave form as it is. Therefore, it becomes unrelated to switching distortion or crossover distortion, and does not have the cause that it is distorted in addition to an element's own linearity. In M-300, the Class-A operation excellent in adopting a Duo beta as LAPT which excelled [element] in the high region property, and an amplifier circuitry, and adopting plusX as a power circuit is realized. In AB class, Oide power which drives transitional distortion below into a limit of measurement in pursuit of a nakedness property also in an operation, and is not made in a Class-A operation on it is realized. At the time of a switching of a Class-A / AB class, in a performance, sound does not break off and a noise is not generated, either. Circuitry constituted all the amplification stages from a push-pull circuit from the input stage to the output stage, and the amplifier which was excellent in the nakedness property which will be the requisite for a Duo beta circuitry is realized. The pre-driver stage is making the input stage the transistor which was excellent in the high region property with the cascode interconnection with the stream composition of the cascode bootstrap and the differential push pull by complimentary FET of a Pch type and a Nch type. And the driver stage and the power stage are considered as the push pull stream composition by a three-step Darlington connection. A linearity makes an output element high speed power transistor linear arithmetic processor-T which was well excellent in the high region property with a triple push pull stream composition, and the electric current is sent. In this way, the static characteristics and the dynamic behavior improved. And proper-quantity NFB and DC servo are added. The power-source part had the twin monophonic stream composition of right-and-left full independence, and has acquired the merit of a linearity covering all the bands, and the outstanding crosstalk property. The power transformer is performing and using the coil mandatory adopted and put into practice among the object for Rch, and two Lch. First, the power stage and the drive stage were made into another coil, and also the primary side and secondary side has unified the orientation of a coil. This is because it is checking having influence on play sound with the potential (polarity) which a transformer begins to roll, rolls and the last each has between opposite groundings. Moreover, four right and left adopt the type only with a capacity of 12,000 micro F for an audio as a filter capacitor, and low-impedance-ization of the power-source part is attained to it. In order to cope with the rush current which becomes large as the capacity of a power-source part becomes large, the rushes current preventing circuitry is adopted. The speaker protection network and the amplifier protection network are carried. The internal organs of the speaker protection network which detects DC output in an output-terminal and separates an output are carried out. Furthermore, when the speaker code etc. short-circuits, even if there is a big input, an amplifier circuitry is protected or the electric-current preventing circuitry is carried. After the elements currently used examine, it is using it, carrying out a tone-quality mandatory strictly uniquely. The film capacitor generally called non-polar is also arranging a polarity etc., and the capacitor is carrying out the tone-quality mandatory strictly. Moreover, the precision succession good transformation Detent volume excellent in the tone quality and a feeling of an operation is adopted as input attenuator. Furthermore, in terminals, the small gilding pin jack of contact resistance was adopted as the input terminal, and the large-sized screw type is adopted as a speaker termination. The product line was packed into the shortest distance, and also it has chosen high materials of the tone-quality effect, such as a shielded cable of oxygen free high conductivity copper and 500 core. Moreover, in order to suppress an elevation of the source impedance of the pattern side of a substrate, the power bus by a copper plate was adopted and the performance of a power source is employed efficiently. The line phase sensor is carried, by the functionality which detects this polarity, the polarity of the equipment was unified and the tone quality is improved. The indicator turned on at the clipping point of an output is carried, and a peek can be supervised.

iFi Audio Pro iESL Headphone Amp for Electrostatic Headphones.  The Pro Series iESL electrostatic headphone amplifier from iFi AUDIO offers transparency and an ultra-wide frequency range. It works with all Stax, Sennheiser Orpheus, and electrostatic headphones. Drive Your Electrostatic Headphones to the Max and Use with a Headphone Amp: iFi Pro iESL Energizer Charges Your 'Phones, Supplies Needed Extra Voltage, Yields Incredible Transparency Drive your electrostatic headphones with the iFi Pro iESL Electrostatic Headphone Energizer and experience the phenomenal transparency, ultra-wide dynamics, and natural musicality for which the style is renowned. Offering perfect bias, impedance, and termination matching with every electrostatic ‘phone around, Pro iESL paired with a high-end headphone amplifier supplies the proper extra-high-tension voltage required by electrostatic headphones – something conventional amplifiers cannot offer. Pro iESL "energizes" the electrostatic plates in your ‘phones, giving them the power they need to operate at peak potential. A hand-wound permalloy core transformer, capacitive battery supply, and bias voltage generator do the work so all you have to do is listen to what you've been missing. iFi Pro iESL is the flagship your electrostatic need and deserve. 100% Music Direct Guaranteed. Please note: iFi Pro iESL is strictly for use with electrostatic headphones and needs to be paired with a headphone amplifier. Maximum Output voltage:   640V RMS (16Ω/20V in)  320V RMS (64Ω/20V in) Frequency Response: 5Hz-50kHz (-3dB) Input Voltage (Pro iESL): 5V-9V/1A max Input Voltage (iPower): AC 85-265V, 50/60Hz Power Consumption: < 1W Dimensions (DWH): 8.4" x 8.1" x 2.5" Weight: 5.5 lbs.  Bought in 09/2019 - Mint Condition -  Sold with full set of accessories and original box.  Still under Manufacturer Warranty (IFI Audio)

Flash drive & TF card are not included.     Specification:  Bluetooth version: V5.0 Bluetooth transmission distance: 10-15M Frequency response: 20Hz-15KHz Audio formats: MP3 / WMA Signal to Noise Ratio: 68dB FM transmission frequency: 87.5-108.0MHz Input: 5V / 2A, 9V / 1.8A Rated voltage: 12V-24V Power consumption: 0.5W Operating temperature: -10 to 70 degrees Operating humidity: 0-90% USB charger output: 5V / 3.1A EAN 4895187175759 Marque Unbranded Type FM Transmitter MPN C152U Brand Unbranded Câble de charge 3en1 Transmetteurs FM sans fil Bluetooth 5.0 pour iPhone Android Flash drive & TF card are not included.     Specification: Bluetooth version: V5.0 Bluetooth transmission distance: 10-15M Frequency response: 20Hz-15KHz Audio formats: MP3 / WMA Signal to Noise Ratio: 68dB FM transmission frequency: 87.5-108.0MHz Input: 5V / 2A, 9V / 1.8A Rated voltage: 12V-24V Power consumption: 0.5W Operating temperature: -10 to 70 degrees Operating humidity: 0-90% USB charger output: 5V / 3.1A Item Specifics EAN 4895187175759 Marque Unbranded Type FM Transmitter MPN C152U Brand Unbranded Payment 1.Quand le paiement des acheteurs est accompli, nous livrerons les marchandises dans un délai de 48 heures. 2.Le transport de fret demande normalement un délais de 6 à 15 jours 3.Nous acceptons seulement l'adresse de Paypal pour la livraison. Les acheteurs doivent s'assurer que l'adresse de Paypal correspond à celle de la réception avant paiement. Returns 1. L'acheteur doit nous informer dans un délai de 14 jours (A compter du jour de délivrance des marchandises). 2. Toutes les marchandises doivent être renvoyées dans leur emballage d'origine avec tous les accessoires au complet. 1. Please notify us within 14 days (according to the posting date). 2. Return items MUST have all ORIGINAL packaging and accessories. 3. Return postage and insurance charge is non-refundable for return items. Professional Quality Best Price DESCRIPTION PAYMENT SHIPPING RETURN POLICY CONTACT US Hot Item Qumox Oxymètre de pouls digital saturomètre pulsomètre mesure doigt Noir EUR 14.99 32Go 64Go 128Go 256Go 512Go Lexar 95Mo/s Class 10 SDXC MicroSD carte mémoire EUR 10.89 Manette Contrôleurs de jeu Joy-Con Gamepad pour Switch Console EUR 40.99 SanDisk 64Go Class 10 Extreme UHS-I U3 SD 150Mo/s SDXC Carte mémoire SD EUR 14.99 Carte Mémoire Micro SD SDHC Class 10 Samsung Evo Plus 32 64 128 256 512 Go EUR 9.29 New List Item Sony MDREX15AP In-Ear Earbud Headphones with Mic - Bleu EUR 10.27 Sony MDREX15AP In-Ear Earbud Headphones with Mic - Violet EUR 10.27 Câble de charge 3 en 1 émetteur FM sans fil Bluetooth 5.0 pour iPhone Android EUR 13.99 Sony MDREX15AP In-Ear Earbud Headphones with Mic - blanc EUR 10.27 Sony MDREX15AP In-Ear Earbud Headphones with Mic - Noir EUR 10.27 Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us Câble de charge 3en1 Transmetteurs FM sans fil Bluetooth 5.0 pour iPhone Android Flash drive & TF card are not included.     Specification: Bluetooth version: V5.0 Bluetooth transmission distance: 10-15M Frequency response: 20Hz-15KHz Audio formats: MP3 / WMA Signal to Noise Ratio: 68dB FM transmission frequency: 87.5-108.0MHz Input: 5V / 2A, 9V / 1.8A Rated voltage: 12V-24V Power consumption: 0.5W Operating temperature: -10 to 70 degrees Operating humidity: 0-90% USB charger output: 5V / 3.1A Item Specifics EAN 4895187175759 Marque Unbranded Type FM Transmitter MPN C152U Brand Unbranded Payment Returns 1.Quand le paiement des acheteurs est accompli, nous livrerons les marchandises dans un délai de 48 heures. 2.Le transport de fret demande normalement un délais de 6 à 15 jours 3.Nous acceptons seulement l'adresse de Paypal pour la livraison. Les acheteurs doivent s'assurer que l'adresse de Paypal correspond à celle de la réception avant paiement. 1. L'acheteur doit nous informer dans un délai de 14 jours (A compter du jour de délivrance des marchandises). 2. Toutes les marchandises doivent être renvoyées dans leur emballage d'origine avec tous les accessoires au complet. 1. Please notify us within 14 days (according to the posting date). 2. Return items MUST have all ORIGINAL packaging and accessories. 3. Return postage and insurance charge is non-refundable for return items.

Professional sound at its best.   The CD 3000 3000W Power Amplifier combines a linear power supply and a Class D output to deliver Crest power in a compact and cost-effective package. The CD 3000 is very versatile, whether powering nightclub systems or touring bands.   A traditional linear power supply is used in the CD Series. Because of the efficiency of the switching output stage, the transformer does not need to be big or heavy. This gives the CD Series an advantage in delivering huge power in a compact package. The efficiency of the output stage also gives the power supply the ability to handle heavy duty cycles without compromising sonic integrity.   Crest Audio's engineering has also maintained sonic quality while incorporating the advantages of a switching output stage. High-power Class-D topology is the key to its efficiency and low operating temperature. An additional advantage is its low power consumption.   Features     Dramatically reduced net weight     Linear power supply / Class D output stages     Very low current draw     Latest generation of high-speed, mosfet output devices     Cooled by variable-speed fan with back-to-front airflow     Inputs: balanced female XLR, 1/4" TRS combi jacks     Outputs: Speakon and five-way binding posts     Mode selector switch for stereo, parallel and bridged-mono operation     Ground-lift switch and rear panel circuit breaker     Recessed, stepped attenuators with removable knobs     16-gauge steel chassis, cast aluminum front panel     TourClass protection circuits     ACL (Active Clip Limiting) prevents speaker damage by providing gentle gain reduction when signal approaches the clipping threshold     IGM (Instantaneous Gain Modulation) monitors speaker loads to detect conditions that may over-stress output devices, allowing safe operation into nominal 2 Ohm speaker loads     AUTORAMP gradually increases gain to the attenuator level-settings when the amplifier is turned on, preventing abrupt turn-on levels     Other protection features include: short circuit, DC voltage, comprehensive thermal management, current in-rush turn-on/off transient and sub/ultrasonic input     Five-year warranty Specifications     Stereo Power 8 Ohms: 800 Watts     Stereo Power 4 Ohms: 1500 Watts     Stereo Power 2 Ohm: 1800 Watts     Bridged Power 8 Ohm: 3000 Watts     Maximum output voltage: 85V rms     Frequency response 1W @ 8 ohms: 20Hz—20khz, +/-1db     Power bw rated power @ 4 ohms, 1% THD+N: 20Hz—20khz, +/-1db     THD + N:     Imd; SMPTE/DIN 4:1 (60 Hz / 7 khz):     Damping factor: 400:1 @ 8 ohms (20 Hz to 100 Hz)     Input CMRR: >60db @ 1khz     Gain / input sensitivity @ 4 ohms: Selectable: x20, x40, or.775 V for full rated output power     Input impedance: >20kohms balanced, >10kohms unbalanced     Hum and noise: > -100db, A-weighted below rated power @ 4 ohms     Crosstalk: > -60db below max rated power (1khz)     Class: D     Power supply: Linear with toroid transformer     Circuit breaker rating (120V/230V): 20A /12A     Current draw (120VAC) 1/8 power, 4 ohms: 7.0A     1/3 power, 4 ohms: 14.0A     At idle: 1.5A     Thermal emissions 1/3 Power, 4 ohms BTU / hr: 1024     Cooling: Back to front via variable speed DC fan     Input connectors: balanced female XLR, 1/4" TRS, unbalanced 1/4" TS on Neutrik combo connectors     Output connectors: Five-way "touch-proof" binding posts and Neutrik Speakon connectors (which presents both outputs on the A Speakon for bi-amplified applications)     Controls: front panel: twin recessed stepped attenuators, power switch     Rear panel: signal ground-lift, mode select, gain select, circuit breaker     LED indicators: signal level (5 element bargraph), protect, active, ACL / IGM     Construction: 16-gauge steel chassis, cast aluminum front panel - optional handles available     Dimensions (W x H x D): 19" x 3.5" x 1

Bluetooth sans fil mains libres voiture émetteur FM lecteur musique MP3 charg DE Specification: Rated working voltage: 12V Extreme work phone: 9-26V USB output: 5V/2A Working temperature: 0-50 degrees Support playback format: MP3/WMA Distortion degree Frequency response: 20HZ-15KHZ Left and right channel separation>60dB Bluetooth version: V2.0 Bluetooth soundtrack processing: with A2DP function Bluetooth transmission distance: 10M-15M Bluetooth microphone effective distance: 0.5M-2M FM transmitting frequency: 87.5-10.8MHZ Transmit FM mode: stereo digital PLL frequency lock Features: 1.Any angle can be adjusted, suitable for all kinds of motor vehicles 2.Support FM full frequency point transmission function 3.Support digital tube display 4.Support LINE audio input 5.Support hard power switch machine (USB pass-through) 6.Support U disk playback 7.Support MP3, WMA format music 8.Bluetooth answer, hang up, reject, redial and other functions 9.Support Bluetooth stereo music playback 10.Echo cancellation and noise suppression (CVC) technology during a call 11.Support dual USB output voltage, supply power to other devices, maximum output 5V/2A 12.Automatic power-off memory function Package including: 1*Bluetooth player   Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Si vous n'êtes pas satisfait de votre achat, contactez-nous sans hésiter. Les articles peuvent être retournés dans 30 jours en état inutilisé, nous effectuerons un échange et un remboursement une fois que nous aurons reçu l'objet. Gardez les étiquettes entières et les éléments propres sans saveur, si non nous n'accepterons pas le retour. Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Specification: Rated working voltage: 12V Extreme work phone: 9-26V USB output: 5V/2A Working temperature: 0-50 degrees Support playback format: MP3/WMA Distortion degree Frequency response: 20HZ-15KHZ Left and right channel separation>60dB Bluetooth version: V2.0 Bluetooth soundtrack processing: with A2DP function Bluetooth transmission distance: 10M-15M Bluetooth microphone effective distance: 0.5M-2M FM transmitting frequency: 87.5-10.8MHZ Transmit FM mode: stereo digital PLL frequency lock Features: 1.Any angle can be adjusted, suitable for all kinds of motor vehicles 2.Support FM full frequency point transmission function 3.Support digital tube display 4.Support LINE audio input 5.Support hard power switch machine (USB pass-through) 6.Support U disk playback 7.Support MP3, WMA format music 8.Bluetooth answer, hang up, reject, redial and other functions 9.Support Bluetooth stereo music playback 10.Echo cancellation and noise suppression (CVC) technology during a call 11.Support dual USB output voltage, supply power to other devices, maximum output 5V/2A 12.Automatic power-off memory function Package including: 1*Bluetooth player PAYMENT Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. SHIPPING Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Terms of Sale Si vous n'êtes pas satisfait de votre achat, contactez-nous sans hésiter. Les articles peuvent être retournés dans 30 jours en état inutilisé, nous effectuerons un échange et un remboursement une fois que nous aurons reçu l'objet. Gardez les étiquettes entières et les éléments propres sans saveur, si non nous n'accepterons pas le retour. ABOUT US Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Le 02-déc.-20 à 07:15:51 Paris, le vendeur a ajouté les informations suivantes:

TWS IPX7 Écouteurs sans fil Casque Bluetooth 5.0 Mini écouteurs Écouteurs sté SH Features:  Bluetooth 5.0: The latest Bluetooth 5.0 chipset offers stable and seamless connectivity with Bluetooth 5.0 and high sensitivity enabled devices (for iPhone and Android) up to 12 meters away.Provides in-call stereo sound. Also own fast and stable transmission without tangling. Lower energy consumption, more stable signal. Hi-Fi Stereo Sound Quality: The sound inside the Bluetooth headphones ensures that you won't miss any part or component of your music. Lossless HD sound quality with deep bass and crystal crisp treble, enjoy your music moment even in a loud environment. Dual ear HD call: It supports active noise reduction function and intelligent filtering of surrounding environment noise, so that your every call is like face-to-face conversation, and truly realizes the dual ear HD call. IPX7 Deep waterproof: These true wireless earbuds against damage from sweat or rain. It won’t get in the way of enjoying sports, music and calls. Perfect for fitness traveling and etc. One-Step Paired: The 2 earbuds would automatically connect to each other once you pick them out of the case, then Only one-step you click the "HBQ-Q32S.TWS" in your phone Bluetooth list to finish the connection between the wireless earbuds and phone within 5s（After the initial pairing, it is not necessary to repeat the above steps when using again.Just take out the headset and the headset will automatically connect to the phone） Specification: Bluetooth version: V5.0+EDR Wireless frequency: 2.4GHZ Support agreement: A2DP1.3/HFP1.6/HSP1.2/AVRCP1.6/D11.3 Transmission distance: 10 meters Battery capacity: 50mAh Charging voltage/current: 5V/1A Play/talk time: about 4 hours Charging time: about 1 Standby time: 120 hours Speaker impedance: φ8MM 32 Sensitivity: -42D Working temperature: -10-50 Input voltage/current: 5V/1 Battery capacity: 2600mA Package inclulding:  1 Pair Headphones 1 * Charging compartment 1 * Charging cable 4 * Ear Caps 1 * Manual   Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Si vous n'êtes pas satisfait de votre achat, contactez-nous sans hésiter. Les articles peuvent être retournés dans 30 jours en état inutilisé, nous effectuerons un échange et un remboursement une fois que nous aurons reçu l'objet. Gardez les étiquettes entières et les éléments propres sans saveur, si non nous n'accepterons pas le retour. Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Features:  Bluetooth 5.0: The latest Bluetooth 5.0 chipset offers stable and seamless connectivity with Bluetooth 5.0 and high sensitivity enabled devices (for iPhone and Android) up to 12 meters away.Provides in-call stereo sound. Also own fast and stable transmission without tangling. Lower energy consumption, more stable signal. Hi-Fi Stereo Sound Quality: The sound inside the Bluetooth headphones ensures that you won't miss any part or component of your music. Lossless HD sound quality with deep bass and crystal crisp treble, enjoy your music moment even in a loud environment. Dual ear HD call: It supports active noise reduction function and intelligent filtering of surrounding environment noise, so that your every call is like face-to-face conversation, and truly realizes the dual ear HD call. IPX7 Deep waterproof: These true wireless earbuds against damage from sweat or rain. It won’t get in the way of enjoying sports, music and calls. Perfect for fitness traveling and etc. One-Step Paired: The 2 earbuds would automatically connect to each other once you pick them out of the case, then Only one-step you click the "HBQ-Q32S.TWS" in your phone Bluetooth list to finish the connection between the wireless earbuds and phone within 5s（After the initial pairing, it is not necessary to repeat the above steps when using again.Just take out the headset and the headset will automatically connect to the phone） Specification: Bluetooth version: V5.0+EDR Wireless frequency: 2.4GHZ Support agreement: A2DP1.3/HFP1.6/HSP1.2/AVRCP1.6/D11.3 Transmission distance: 10 meters Battery capacity: 50mAh Charging voltage/current: 5V/1A Play/talk time: about 4 hours Charging time: about 1 Standby time: 120 hours Speaker impedance: φ8MM 32 Sensitivity: -42D Working temperature: -10-50 Input voltage/current: 5V/1 Battery capacity: 2600mA Package inclulding:  1 Pair Headphones 1 * Charging compartment 1 * Charging cable 4 * Ear Caps 1 * Manual PAYMENT Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. SHIPPING Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Terms of Sale Si vous n'êtes pas satisfait de votre achat, contactez-nous sans hésiter. Les articles peuvent être retournés dans 30 jours en état inutilisé, nous effectuerons un échange et un remboursement une fois que nous aurons reçu l'objet. Gardez les étiquettes entières et les éléments propres sans saveur, si non nous n'accepterons pas le retour. ABOUT US Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Le 08-déc.-20 à 08:26:51 Paris, le vendeur a ajouté les informations suivantes:

Transmetteur FM voiture Kit mains libres Bluetooth sans fil Lecteur MP3 Charg LB Features: Bluetooth Version 4.0, support Bluetooth Handsfree call, Bluetooth music transmission, caller number; Support TF Card(Micro SD Card)/USB Flash player(card reader function), support MP3/WMA format music; Double USB Charging port DC5V/2.1A can expand the portable device function, suitable for all mobile phone, tablet and other electronic products charge; 1.3 inch dot matrix LED screen, display frequency point, file name, and working state information; Support ONE key menu setting language, playback mode, and sound mode; Support Power Failure memory and folder playback; AUX Input and output function; Car Battery Voltage display; FM Frequency range: 87.5MHz to 108MHz   Specifications: Rated operating voltage: 12V-24V USB Output: 5V/2.1A + 5V/1.0A Working Temp: 0-40 Celsius Support Play format: MP3 / WMA TF/USB Flash Storage memory: SNR: >60db Distortion: Frequency Response: 20Hz-15Khz Left and right channel separation: >60db BT Version: Version 4.0+EDR Bluetooth transmission distance: 10M Microphone effective range: 0.5-2M FM transmission frequency: 87.5-108Mhz Product size:13*10*3.5cm    Package included:  1 Bluetooth Car MP3 Player 1 user manual 1 fuse 1 AUX audio cable Payment Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. Shipping Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Terms of Sale Si vous n'êtes pas satisfait de votre achat, contactez-nous sans hésiter. Les articles peuvent être retournés dans 30 jours en état inutilisé, nous effectuerons un échange et un remboursement une fois que nous aurons reçu l'objet. Gardez les étiquettes entières et les éléments propres sans saveur, si non nous n'accepterons pas le retour. About US Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Features: Bluetooth Version 4.0, support Bluetooth Handsfree call, Bluetooth music transmission, caller number; Support TF Card(Micro SD Card)/USB Flash player(card reader function), support MP3/WMA format music; Double USB Charging port DC5V/2.1A can expand the portable device function, suitable for all mobile phone, tablet and other electronic products charge; 1.3 inch dot matrix LED screen, display frequency point, file name, and working state information; Support ONE key menu setting language, playback mode, and sound mode; Support Power Failure memory and folder playback; AUX Input and output function; Car Battery Voltage display; FM Frequency range: 87.5MHz to 108MHz   Specifications: Rated operating voltage: 12V-24V USB Output: 5V/2.1A + 5V/1.0A Working Temp: 0-40 Celsius Support Play format: MP3 / WMA TF/USB Flash Storage memory: SNR: >60db Distortion: Frequency Response: 20Hz-15Khz Left and right channel separation: >60db BT Version: Version 4.0+EDR Bluetooth transmission distance: 10M Microphone effective range: 0.5-2M FM transmission frequency: 87.5-108Mhz Product size:13*10*3.5cm    Package included:  1 Bluetooth Car MP3 Player 1 user manual 1 fuse 1 AUX audio cable PAYMENT Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. SHIPPING Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Terms of Sale Si vous n'êtes pas satisfait de votre achat, contactez-nous sans hésiter. Les articles peuvent être retournés dans 30 jours en état inutilisé, nous effectuerons un échange et un remboursement une fois que nous aurons reçu l'objet. Gardez les étiquettes entières et les éléments propres sans saveur, si non nous n'accepterons pas le retour. ABOUT US Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Le 09-déc.-20 à 08:53:13 Paris, le vendeur a ajouté les informations suivantes:

Transmetteur FM voiture sans fil Bluetooth Lecteur MP3 2 USB Chargeur rapide DE Feature: 1.Power on and detect battery voltage. 2.Support Bluetooth hands-free, built-in microphone, convenient and safe answering calls; caller ID. 3.Noise processing CVC, wind noise suppression, full-duplex communication technology during a call. 4.Support mobile phone A2DP function, play high-quality mobile music directly after connecting to Bluetooth. 5.After power on, it will automatically connect back and enter the pairing state automatically. 6.Support TF card expansion to play MP3/WMA/MAV/FLAC format music. 7.Dual USB car charger, QC3.0 fast charge can charge handheld terminal devices. 8.AUX port output and input, play music and display song name Specification: Bluetooth version: V5.0 Rated working voltage: 12V-24V USB2 output: QC3.0: 5V/3A (MAX) Working temperature: Music format: MP3/MAV/WMA/FLAC Support U disk, TF card capacity: 1G-32G FM transmitting frequency: 87.5MHz-108MHz Effective call distance: 0.5-2M Bluetooth effective distance: ≤10m Screen: 1.8 inches Package Including: Audio cable*1 Manual *1 Car MP3*1 Moyen de Paiement Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. Livraison Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Politique de Retour Sur nous Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Feature: 1.Power on and detect battery voltage. 2.Support Bluetooth hands-free, built-in microphone, convenient and safe answering calls; caller ID. 3.Noise processing CVC, wind noise suppression, full-duplex communication technology during a call. 4.Support mobile phone A2DP function, play high-quality mobile music directly after connecting to Bluetooth. 5.After power on, it will automatically connect back and enter the pairing state automatically. 6.Support TF card expansion to play MP3/WMA/MAV/FLAC format music. 7.Dual USB car charger, QC3.0 fast charge can charge handheld terminal devices. 8.AUX port output and input, play music and display song name Specification: Bluetooth version: V5.0 Rated working voltage: 12V-24V USB2 output: QC3.0: 5V/3A (MAX) Working temperature: Music format: MP3/MAV/WMA/FLAC Support U disk, TF card capacity: 1G-32G FM transmitting frequency: 87.5MHz-108MHz Effective call distance: 0.5-2M Bluetooth effective distance: ≤10m Screen: 1.8 inches Package Including: Audio cable*1 Manual *1 Car MP3*1 PAYMENT Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. SHIPPING Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. ABOUT US Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Le 18-mai-21 à 09:10:21 Paris, le vendeur a ajouté les informations suivantes:

Kit chargeur USB mains libres Pr lecteur MP3 avec émetteur FM voiture Bluetoo SC Specification: Colour: Black Transmitter size: about 7 x 3.8 x 7.8 cm Remote control size: about 8.6 x 4 x 0.7 cm Bluetooth version 3.0 (10m range) Maximum distance to the microphone: 2m Power consumption: 1W Input voltage: 9-26 V Transmission frequency: 87.5-108 Mhz Charging current through USB: 5V 1A Feature: 1.Many older cars lack the ability to connect mobile phones, MP3 players, and tablets to the car radio to play your favorite music. This FM transmitter solves your problem! Enjoy your favorite music through the car speakers. 2.Free choice of music source: The FM transmitter provides three options for transferring music: via microSD, USB input for USB memory sticks, and Bluetooth via mobile phones, tablets, laptops, etc. 3.The USB port is also used to power mobile devices. 4.Handless integrated system: Using the integrated microphone, you can answer or make calls. Car speakers are used for this playback Package Including: 1 x car FM transmitter 1 x remote control (including battery) Payment Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. Shipping Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Terms of Sale Si vous n'êtes pas satisfait de votre achat, contactez-nous sans hésiter. Les articles peuvent être retournés dans 30 jours en état inutilisé, nous effectuerons un échange et un remboursement une fois que nous aurons reçu l'objet. Gardez les étiquettes entières et les éléments propres sans saveur, si non nous n'accepterons pas le retour. About US Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Specification: Colour: Black Transmitter size: about 7 x 3.8 x 7.8 cm Remote control size: about 8.6 x 4 x 0.7 cm Bluetooth version 3.0 (10m range) Maximum distance to the microphone: 2m Power consumption: 1W Input voltage: 9-26 V Transmission frequency: 87.5-108 Mhz Charging current through USB: 5V 1A Feature: 1.Many older cars lack the ability to connect mobile phones, MP3 players, and tablets to the car radio to play your favorite music. This FM transmitter solves your problem! Enjoy your favorite music through the car speakers. 2.Free choice of music source: The FM transmitter provides three options for transferring music: via microSD, USB input for USB memory sticks, and Bluetooth via mobile phones, tablets, laptops, etc. 3.The USB port is also used to power mobile devices. 4.Handless integrated system: Using the integrated microphone, you can answer or make calls. Car speakers are used for this playback Package Including: 1 x car FM transmitter 1 x remote control (including battery) PAYMENT Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. SHIPPING Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Terms of Sale Si vous n'êtes pas satisfait de votre achat, contactez-nous sans hésiter. Les articles peuvent être retournés dans 30 jours en état inutilisé, nous effectuerons un échange et un remboursement une fois que nous aurons reçu l'objet. Gardez les étiquettes entières et les éléments propres sans saveur, si non nous n'accepterons pas le retour. ABOUT US Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Le 01-déc.-20 à 11:06:23 Paris, le vendeur a ajouté les informations suivantes:

5.0 LED adaptateur Bluetooth récepteur / émetteur Audio USB pour ordinateur p LB a.imagelink {color:#000006;} a:hover.imagelink {color:#000006;} a:visited.imagelink {color:#8f8f8f;} a.imagelink img.auctionimage { border: 2px solid #000006; } a:visited.imagelink img.auctionimage { border: 2px solid #8f8f8f; } Description Specifications: Bluetooth version: 5.0 Function: Bluetooth audio receiving and transmitting combo Built-in noise reduction HIFI sound quality Transmission signal distance: 10m Fully compatible with automatic matching Input interface: 3.5mm Input voltage: DC/5V Features: 1.Support hands-free calling. 2.LCD screen display. 3.No need to drive, plug and play. 4.No built-in battery, external power supply. Package inclulding: Host *1 3.5mm audio cable*1 Charging cable*1 Manual *1 Payment Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. Shipping Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Terms of Sale About Us Si vous n'êtes pas satisfait de votre achat, contactez-nous sans hésiter. Les articles peuvent être retournés dans 30 jours en état inutilisé, nous effectuerons un échange et un remboursement une fois que nous aurons reçu l'objet. Gardez les étiquettes entières et les éléments propres sans saveur, si non nous n'accepterons pas le retour. Specifications: Bluetooth version: 5.0 Function: Bluetooth audio receiving and transmitting combo Built-in noise reduction HIFI sound quality Transmission signal distance: 10m Fully compatible with automatic matching Input interface: 3.5mm Input voltage: DC/5V Features: 1.Support hands-free calling. 2.LCD screen display. 3.No need to drive, plug and play. 4.No built-in battery, external power supply. Package inclulding: Host *1 3.5mm audio cable*1 Charging cable*1 Manual *1 PAYMENT Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. SHIPPING Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Terms of Sale ABOUT US Si vous n'êtes pas satisfait de votre achat, contactez-nous sans hésiter. Les articles peuvent être retournés dans 30 jours en état inutilisé, nous effectuerons un échange et un remboursement une fois que nous aurons reçu l'objet. Gardez les étiquettes entières et les éléments propres sans saveur, si non nous n'accepterons pas le retour. Le 01-juin-21 à 10:07:09 Paris, le vendeur a ajouté les informations suivantes:

12 V voiture MP3 Bluetooth WMA / WAV carte décodeur Module Audio USB SD FM TF LB Specification Installation pitch: 92 mm wide Installation hole: 83 x 20 x 38 mm Overall dimensions: 107*25*38mm/ 4.21*0.98*1.5 "  Input voltage：7-12V Descriptions 100% Brand New and high quality support bluetooth (Bluetooth3.0 EDR) (after been paired with mobile phones can realize wireless music play) support USB/TF/Bluetooth/FM/LINE switch.MP3/WMA,WAV lossless music decoding chip. support USB/TF card switch,PREV,NEXT,fast forward,fast rewind, volume,EQ,play/pause,stop,single repeat,mute, shutdown and direct election. support Bluetoot PREV,NEXT,volume,EQ,play/pause,mute,turn it off. support FAT16,FAT32 file system.Support for MP1 Layer3,MP2 Layer3,MP3 Layer3 version of the song. Support 32-320 KBPS MP3 songs. support power off memory function: memory play songs and volume before power off. Note: Non-smart phones (android) have to enter the password - 0000 Decoding board play mode instruction Decoding board in the absence of memory card or U disk,boot default to "audio input" mode,the screen display LINE Press "MODE" key on the panel or the remote control switch to bluetooth MODE,the screen shows "BLUE",can open bluetooth search connection at this time Press "MODE" key on the panel or the remote control switch to radio MODE,the screen display FM radio frequency,long press "PLAY" button automatic searching channel Press "MODE" key on the panel or the remote control switch to the U disk or memory card "play MODE",the screen displays the time schedule of the song The remote control instruction: POWER: STANDBY button cannot switch. MODE: TF card and U disk: switching sequence for USB→TF→Bluetooth→FM→AUX;Only U disk: switching sequence for USB→Bluetooth→FM→AUX;Only the TF card: switching sequence for TF→Bluetooth→FM→AUX;There is no USB and TF card: switching sequence for FM→AUX→Bluetooth. PREV: In USB/TF/Bluetooth MODE,short press for PREV;In the USB/SD MODE,long press for fast rewind;In FM MODE, short press for last channel,long press for scan search last channel. NEXT: In USB/TF/Bluetooth MODE,short press for NEXT;In USB/TF MODE,long press for fast forward;In FM MODE,short press for next channel,long press for scan search the next channel. VOL +: short/long press for music. VOL -: short/long press for music. REP:In USB/TF MODE,is the switch key between single repeat and whole cycle when play music,boot for all cycle. STOP: In the USB/TF MODE,short press to STOP the music play. MUTE: MUTE,press for MUTE,press again for relieve(also can relieve by VOL- /VOL+). EQ: Acoustic field MODE.The NORMAL→BAS→POP→ROC→JAZZ→CLA→CUT→NORMAL PLAY/PAUSE: In USB/SD/Bluetooth MODE for PLAY/PAUSE;In the FM MODE,long press for searching all channels and save. Package Include 1 x Decoding board 1 x The remote control (no battery included) 1 x 2P plug wire with power supply reverse connection protection 1 x 3P audio plug thread Moyen de Paiement Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. Livraison Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Politique de Retour Sur nous Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Specification Installation pitch: 92 mm wide Installation hole: 83 x 20 x 38 mm Overall dimensions: 107*25*38mm/ 4.21*0.98*1.5 "  Input voltage：7-12V Descriptions 100% Brand New and high quality support bluetooth (Bluetooth3.0 EDR) (after been paired with mobile phones can realize wireless music play) support USB/TF/Bluetooth/FM/LINE switch.MP3/WMA,WAV lossless music decoding chip. support USB/TF card switch,PREV,NEXT,fast forward,fast rewind, volume,EQ,play/pause,stop,single repeat,mute, shutdown and direct election. support Bluetoot PREV,NEXT,volume,EQ,play/pause,mute,turn it off. support FAT16,FAT32 file system.Support for MP1 Layer3,MP2 Layer3,MP3 Layer3 version of the song. Support 32-320 KBPS MP3 songs. support power off memory function: memory play songs and volume before power off. Note: Non-smart phones (android) have to enter the password - 0000 Decoding board play mode instruction Decoding board in the absence of memory card or U disk,boot default to "audio input" mode,the screen display LINE Press "MODE" key on the panel or the remote control switch to bluetooth MODE,the screen shows "BLUE",can open bluetooth search connection at this time Press "MODE" key on the panel or the remote control switch to radio MODE,the screen display FM radio frequency,long press "PLAY" button automatic searching channel Press "MODE" key on the panel or the remote control switch to the U disk or memory card "play MODE",the screen displays the time schedule of the song The remote control instruction: POWER: STANDBY button cannot switch. MODE: TF card and U disk: switching sequence for USB→TF→Bluetooth→FM→AUX;Only U disk: switching sequence for USB→Bluetooth→FM→AUX;Only the TF card: switching sequence for TF→Bluetooth→FM→AUX;There is no USB and TF card: switching sequence for FM→AUX→Bluetooth. PREV: In USB/TF/Bluetooth MODE,short press for PREV;In the USB/SD MODE,long press for fast rewind;In FM MODE, short press for last channel,long press for scan search last channel. NEXT: In USB/TF/Bluetooth MODE,short press for NEXT;In USB/TF MODE,long press for fast forward;In FM MODE,short press for next channel,long press for scan search the next channel. VOL +: short/long press for music. VOL -: short/long press for music. REP:In USB/TF MODE,is the switch key between single repeat and whole cycle when play music,boot for all cycle. STOP: In the USB/TF MODE,short press to STOP the music play. MUTE: MUTE,press for MUTE,press again for relieve(also can relieve by VOL- /VOL+). EQ: Acoustic field MODE.The NORMAL→BAS→POP→ROC→JAZZ→CLA→CUT→NORMAL PLAY/PAUSE: In USB/SD/Bluetooth MODE for PLAY/PAUSE;In the FM MODE,long press for searching all channels and save. Package Include 1 x Decoding board 1 x The remote control (no battery included) 1 x 2P plug wire with power supply reverse connection protection 1 x 3P audio plug thread PAYMENT Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. SHIPPING Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. ABOUT US Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Le 18-mai-21 à 09:53:24 Paris, le vendeur a ajouté les informations suivantes:

12V 4.2 voiture MP3 Bluetooth WMA / WAV carte décodeur Module audio USB SD FM DE Specification Installation pitch: 92 mm wide Installation hole: 83 x 20 x 38 mm Overall dimensions: 107*25*38mm/ 4.21*0.98*1.5 "  Input voltage：7-12V Descriptions 100% Brand New and high quality support bluetooth (Bluetooth3.0 EDR) (after been paired with mobile phones can realize wireless music play) support USB/TF/Bluetooth/FM/LINE switch.MP3/WMA,WAV lossless music decoding chip. support USB/TF card switch,PREV,NEXT,fast forward,fast rewind, volume,EQ,play/pause,stop,single repeat,mute, shutdown and direct election. support Bluetoot PREV,NEXT,volume,EQ,play/pause,mute,turn it off. support FAT16,FAT32 file system.Support for MP1 Layer3,MP2 Layer3,MP3 Layer3 version of the song. Support 32-320 KBPS MP3 songs. support power off memory function: memory play songs and volume before power off. Note: Non-smart phones (android) have to enter the password - 0000 Decoding board play mode instruction Decoding board in the absence of memory card or U disk,boot default to "audio input" mode,the screen display LINE Press "MODE" key on the panel or the remote control switch to bluetooth MODE,the screen shows "BLUE",can open bluetooth search connection at this time Press "MODE" key on the panel or the remote control switch to radio MODE,the screen display FM radio frequency,long press "PLAY" button automatic searching channel Press "MODE" key on the panel or the remote control switch to the U disk or memory card "play MODE",the screen displays the time schedule of the song The remote control instruction: POWER: STANDBY button cannot switch. MODE: TF card and U disk: switching sequence for USB→TF→Bluetooth→FM→AUX;Only U disk: switching sequence for USB→Bluetooth→FM→AUX;Only the TF card: switching sequence for TF→Bluetooth→FM→AUX;There is no USB and TF card: switching sequence for FM→AUX→Bluetooth. PREV: In USB/TF/Bluetooth MODE,short press for PREV;In the USB/SD MODE,long press for fast rewind;In FM MODE, short press for last channel,long press for scan search last channel. NEXT: In USB/TF/Bluetooth MODE,short press for NEXT;In USB/TF MODE,long press for fast forward;In FM MODE,short press for next channel,long press for scan search the next channel. VOL +: short/long press for music. VOL -: short/long press for music. REP:In USB/TF MODE,is the switch key between single repeat and whole cycle when play music,boot for all cycle. STOP: In the USB/TF MODE,short press to STOP the music play. MUTE: MUTE,press for MUTE,press again for relieve(also can relieve by VOL- /VOL+). EQ: Acoustic field MODE.The NORMAL→BAS→POP→ROC→JAZZ→CLA→CUT→NORMAL PLAY/PAUSE: In USB/SD/Bluetooth MODE for PLAY/PAUSE;In the FM MODE,long press for searching all channels and save. Package Include 1 x Decoding board 1 x The remote control (no battery included) 1 x 2P plug wire with power supply reverse connection protection 1 x 3P audio plug thread Moyen de paiement Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. Livraison Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Conditions de vente Sur nous Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Specification Installation pitch: 92 mm wide Installation hole: 83 x 20 x 38 mm Overall dimensions: 107*25*38mm/ 4.21*0.98*1.5 "  Input voltage：7-12V Descriptions 100% Brand New and high quality support bluetooth (Bluetooth3.0 EDR) (after been paired with mobile phones can realize wireless music play) support USB/TF/Bluetooth/FM/LINE switch.MP3/WMA,WAV lossless music decoding chip. support USB/TF card switch,PREV,NEXT,fast forward,fast rewind, volume,EQ,play/pause,stop,single repeat,mute, shutdown and direct election. support Bluetoot PREV,NEXT,volume,EQ,play/pause,mute,turn it off. support FAT16,FAT32 file system.Support for MP1 Layer3,MP2 Layer3,MP3 Layer3 version of the song. Support 32-320 KBPS MP3 songs. support power off memory function: memory play songs and volume before power off. Note: Non-smart phones (android) have to enter the password - 0000 Decoding board play mode instruction Decoding board in the absence of memory card or U disk,boot default to "audio input" mode,the screen display LINE Press "MODE" key on the panel or the remote control switch to bluetooth MODE,the screen shows "BLUE",can open bluetooth search connection at this time Press "MODE" key on the panel or the remote control switch to radio MODE,the screen display FM radio frequency,long press "PLAY" button automatic searching channel Press "MODE" key on the panel or the remote control switch to the U disk or memory card "play MODE",the screen displays the time schedule of the song The remote control instruction: POWER: STANDBY button cannot switch. MODE: TF card and U disk: switching sequence for USB→TF→Bluetooth→FM→AUX;Only U disk: switching sequence for USB→Bluetooth→FM→AUX;Only the TF card: switching sequence for TF→Bluetooth→FM→AUX;There is no USB and TF card: switching sequence for FM→AUX→Bluetooth. PREV: In USB/TF/Bluetooth MODE,short press for PREV;In the USB/SD MODE,long press for fast rewind;In FM MODE, short press for last channel,long press for scan search last channel. NEXT: In USB/TF/Bluetooth MODE,short press for NEXT;In USB/TF MODE,long press for fast forward;In FM MODE,short press for next channel,long press for scan search the next channel. VOL +: short/long press for music. VOL -: short/long press for music. REP:In USB/TF MODE,is the switch key between single repeat and whole cycle when play music,boot for all cycle. STOP: In the USB/TF MODE,short press to STOP the music play. MUTE: MUTE,press for MUTE,press again for relieve(also can relieve by VOL- /VOL+). EQ: Acoustic field MODE.The NORMAL→BAS→POP→ROC→JAZZ→CLA→CUT→NORMAL PLAY/PAUSE: In USB/SD/Bluetooth MODE for PLAY/PAUSE;In the FM MODE,long press for searching all channels and save. Package Include 1 x Decoding board 1 x The remote control (no battery included) 1 x 2P plug wire with power supply reverse connection protection 1 x 3P audio plug thread PAYMENT Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. SHIPPING Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Terms of Sale ABOUT US Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Le 19-avr.-21 à 09:17:21 Paris, le vendeur a ajouté les informations suivantes:

X CABLE – TLP07CF-6 Key Features - Line level input adaptor cable with DC power in - In-line regulator 9v to 16v input - XLR female and 4-pin Hirose to 6-pin Lemo - For Micron 700 and Explorer 100 transmitters - 0.7 metres long Description Line input (0 dBm) and external powering with in-line voltage regulator, 0.7 metres long, XLR female and 4-pin Hirose æYÆ cable to 6-pin Lemo connector. DC input voltage to Hirose 9v to 16V. Marked TLP07CF-6 En savoir plus

DANTEK 2 Boitier PoE-24VS + 3 Boitier PoE-24V - Injector and Splitter (sans l'alim) N'hésitez pas à nous faire une proposition de prix, nous sommes ouvert à toute proposition Merci par avance ************************************************ lien pour info technique (non contractuel): http://www.allgemeine-holding.ro/index.php?option=com_content&view=article&id=84&Itemid=91 description (non contractuelle): 10/100M -TX Power over Ethernet Adapter PoE-24V Injector- input DC 24V/1A PoE-24VS Splitter- DC Output 12V/1A, 9V/1.2A, 5V/2A 1. Description: DANTEK PoE-24V Injector inserts current into the unused wires in a standard network cable(pin: 4, 5, 7, 8) to allow the cable between PoE-24V Injector and PoE-24VS Splitter to transfer power and network signals simultaneously. - When positioning network devices, system designers always have to consider the location of power outlets. In some cases, this will restrict the optimum placement of devices or incur additional cost in installing new outlets. Dantek's PoE-24V/PoE-24VS offer the solution of these problems. - Using the Dantek POE-24V/POE-24VS adapters, you can power most DC network devices (hubs, Wireless access points, cameras etc) over the same Cat 5/5e cable used to connect the device to the network.       2. Features • Provides 24V low-voltage DC power over existing Category 5 cabling to a device with an Ethernet port • Distance up to 100 meters • Protects devices from possible damages due to power-surges • Three different output voltage options (5V/2A, 9V/1.2A, 12V/1A) to fit various devices • Work with EIA568, category 6, 5-pair cable for 10Base-T or 100Base-TX, Ethernet / Fast Ethernet network 3. Technical Specification Product  Description PoE-24V Injector PoE-24VS Splitter Ports 2 RJ-45 Data / Data + Power out 2 RJ-45 Data + Power in / Data Ethernet data rate 10/100M bps Number of devices that can be powered 1 Ethernet data cable TIA/EIA-568,Category 5/5e/4 cable POE Category 5 pin power usage +: pin 4,5     -: pin 7,8 voltage, maximum current Input DC 24V,1A (over RJ-45 UTP cable) Output: DC 5V/2A DC 9V/1.2A DC 12V/1A Dip switch - 1 for DC voltage selection LED indication 1 Power LED 1 Power LED Dimensions (L*W*H) 62mm x 42mm x 21mm Operating environment Temperature:0~50 degree C Humidity: 5~95%(non-condensing) Emission FCC/CE           4. Applications Dantek PoE Save Your Power Infrastructure Cost PoE allows power to be supplied to end devices, such as Wireless Access Points or VoIP Phones, directly through the existing LAN cables. By supplying the power end-span, you can centralize power distribution and backup without the need to increase infrastructure. Please note: 1.  PoE-24V/PoE-24VS does not comply with IEEE802.3af, Don’t connect any of it to an IEEE802.3af devices. For PoE-24V, it will inject power all the time when it is connected with a AC/DC 24V adaptor.  It means that (pin: 4, 5, 7, 8) inject power all the time, so when you connect it into network, please make sure the safety of body and connected equipment. POE-24VS is not an IEEE802.3af complied device, PoE-24VS will not detect and reply the signal from 802.3af injector. As a result, the Power LED will never turns on if you connect to an IEEE802.3af injector and never power the remote device as well. Gigabit Ethernet is not allowed to use PoE-24V/PoE-24VS products since pair 4,5 and pair 7,8 are all being used. Only 10/100M TX can apply with our PoE-24V/PoE-24VS. For safety reason, PoE-24V/PoE-24VS will only support device with power consumption below 12watts. Please make sure the remote Ethernet device is under the range of 12V/1A, 9V/1.2A, 5V/2A. Please by using PoE-24V/PoE-24VS together on both sides of cable all the time. Créé par L'outil de m

Vends vidéo projecteur SANYO PLC-XU88 3000 Lumens très peu servi, excellent état. Livré avec télécommande, notice d'emploi et sac de transport adapté. Caractéristiques: Resolution XGA (1024 x 768) Brightness 3000 ANSI Lumens LCD Panel System 0.63” TFT p-Si x 3 w/Micro Lens Number of Pixels 2,359,296 (786,432 x 3) Contrast Ratio 500:1 (Lamp Mode ”Auto”, Image Mode ”Dynamic”) Image Size (diagonal) 40” – 300” Aspect Ratio 4:3 Zoom/Focus Manual Zoom Ratio 1:1.57 Up/Down Ratio 9:1 Digital Keystone Correction Vertical: +/- 20 w/Auto Keystone correction Projection System Dichroic mirror & X prism system w/PBS Projection Lens F1.6-2.5 / f0.70”-1.11” Lens Throw Ratio 1.38-2.17:1 Projection Lamp 220W UHP Scanning Frequency H Sync: 15-100kHz, V Sync: 50-100Hz Dot Clock 140MHz Color System PAL/PAL-M/PAL-N/SECAM/NTSC/NTSC4.43 Computer Compatibility UXGA, WXGA, SXGA, XGA, SVGA, VGA, MAC Sound Output One-piece, 1-watt Mono Voltage 100-120 200-240V AC (auto Voltage); 50/60 Hz Power Consumption 275W / 195W (Eco mode) Dimensions (WxHxD) 13.2” x 3.1” x 9.4” Net Weight 7.5 lbs User Maintenance Clean air filters, replace lamp assembly PC Input Terminals DVI-I x 1 (Digital with HDCP / Analog) • D-sub15 x 1(In/Monitor out) • Audio x 1 (Stereo mini-jack: common) Video Input Terminals Composite Video (RCA x 1)• S-Video (Mini-DIN 4-pin) • R & L/mono audio (RCA x 2) • Component Video (D-Sub15 input w/optional cable) • Audio for Component Video(stereo mini-jack) Included Accessories I/R Remote Control • 2 AAA Batteries • Owner’s Manual(CD-ROM & Quick Reference Guide)

    iFi Audio Micro iDSD DAC and Headphone Amp - with Pre amp Variable out. There is nothing like the micro iDSD. It is literally, out of this world. It is the only DAC in the world (at any price) to play True Native Octa-DSD512/PCM768/Double DXD. Its Perfect-Match means it can be fine-tuned to any headgear from IEMs all the way through to large headphones. Its 8v/4000mW output makes it one of the most powerful headamps to drive even the most hungry of headphones with ease. iFi has forged an enviable reputation for being at the forefront of computer audio technology. The micro iDSD has just made another leap, an Octa-Leap to be precise. With its special Dual-Core Burr-Brown native DSD/PCM chipset at the heart, the micro iDSD is capable of True Native PCM768, Octa-Speed DSD512 and 2x DXD; it is simply out of this world. The micro iDSD has 3 different power modes Eco, Normal and Turbo. Capable of 4000mW, 1000mW or 250mW, the micro iDSD is able to drive the full gamut of headphone and amplifiers alike. With iEMatch there to dial to suit any IEM, the micro iDSD has redefined the headphone amplifier class. Used along with the analogue volume control, the diminutive size of the micro iDSD belies its uncanny ability to drive virtually anything and everything! SmartPower® is the micro iDSD’s onboard recharging feature for Smartdevices. Its 4800mAH battery is able to fully recharge an iPhone two-times. Compatible with Apple and Android, phones and tablets, it is another example of iFi’s commitment to customer needs – enjoy high-end audio on the go without worrying about the phone going flat. iFi’s iCAN and iTube have already achieved widespread acclaim, so much so that their core features including 3D Holographic and XBass have become renowned in their own right and imitated by others. In the micro iDSD, for the first time in an iFi product, it features XBass and 3D Holographic for Headphones and Speakers. All these features are still executed in the analogue, not digital domain to preserve the original music format. And so much more….with the amazing Crowd-Design program, we are over the moon that you, the customer was central to the development of the micro iDSD. The micro iDSD is literally bursting with features – such as Direct/Pre-Amp, 3.5mm input, SPDIF Input/Output and much, much more. You will have to see it to believe it.   Specifications:     Item Description Remarks Inputs/Outputs     Inputs (rear) USB 2.0 type A “OTG” Socket (with iPurifier® technology built-in) Compatible with computers (Apple/Win/Linux), iPhone, iPod Touch, iPad and Android Devices, camera kit or USB-OTG cable required. (Full USB3.0 port compatible)   Intelligent SPDIF® Coaxial 3 Way combo SPDIF port (Coaxial In/Out; Optical In); Up to 192kHz PCM   SPDIF Optical         Outputs (rear) Audio RCA L+R     Intelligent SPDIF® Coaxial Up to 192kHz PCM       Output (right side) SmartPower® Socket Fast charge all portable devices. Compliant with USB Battery Charging Standard 1.2 – 5V @ 1.5A             Controls     Controls (front)     - HP Output Audio 6.3mm Headphone Jack   - Volume with Power On/Off switch Precision analogue volume control - 3.5mm Input   Auto disable the digital section when this is in use - X-Bass® On/Off   - 3D Holographic Sound® On/Off Auto-switching for Speakers® and Headphones® (two separate and distinct circuits)       Controls (left side)     - Power Mode Turbo, Normal, Eco Computer controlled power and gain scaling - Polarity Normal/Inverted   - Filter 3 positions, 6 filters (see filter section below)       Controls (bottom)     - Line Direct/Preamplifier Preamplifier function Enable/Disable, 0/9dB gain selectable Fixed 2V or variable with up to 5V available - iEMatch® Perfect-matching circuit for IEMs (eliminate hiss) Off / High Sensitivity Headphone / Ultra Sensitivity Headphone             DAC section     DAC Dual-core DSD, DXD, PCM DAC by Burr Brown 2-DAC Chip; 4-Channel; 8-Signals, custom interleaving for maximum SNR   Bit-Perfect DSD processing, Bit-Perfect PCM processing         Clock Ultra low jitter GMT computer controlled Femto Clock RMS jitter 12kHz – 1MHz       Audio Formats DSD 512/256/128/64 24.6/22.6/12.4/11.2/6.2/5.6/3.1/2.8 All native decoding, no internal hardware conversion   DXD 2x/1x 768/705.6/384/352.8kHz All native decoding, no internal hardware conversion   PCM 768/705.6/384/352.8/192/176.4/96/88.2/ 48/44.1kHz All native decoding, no internal hardware conversion       Filters     - PCM Bit-Perfect Processing/Minimum Phase/Standard Digital filters selectable - DSD Extreme/Extended/Standard Range Analogue filters selectable - DXD Bit-Perfect Processing Fixed analogue filter             Specifications (DAC Section)     Dynamic Range (Line) >117db(A)   THD & N (0dBFS Line)   Output Voltage (Line) >2V   Output Impedance (Zout)   Jitter (correlated) Below AP2 test set limit               Headphone Power Output     HP Amp Output Power (max) Power (continuous.) - Turbo mode 10.0V/4,000 mW @ 16 Ohm >1560 mW @ 64 Ohm - Normal mode 5.5V/1,900 mW @ 16 Ohm >950 mW @ 32 Ohm - Eco mode 2.0V/500 mW @ 8 Ohm >250 mW @ 16 Ohm             Specifications (Headamp Section)     Dynamic Range (HP) >115dB(A) (Eco Mode, 2V Out)   THD &N (HP 500mW/16R)   Output Voltage (HP) >8V (Turbo Mode)   Output Impedance (Zout)   Maximum Output Power 4,000mW @ 16 Ohm Load when using sinewave testing the iDSD micro may engage protection circuits Continuous Output Power 1,000mW @ 64 Ohm Load  

The Cara preamplifier is prefect for audiophiles looking for a quiet, fast pre-amplifier with multiple inputs and 4 channel outputs. This allows a biamped system or a speaker/sub combination to be control by the Cara Pre-amplifier. With a balance input and balanced output line drivers, the noise rejection on the inputs and outputs are very high and perfect for low noise systems. Built in a steel chassis for EMI/RFI protection, the Cara pre-amplifier will bring music details out, to deliver a greater musical experience. Pre-amplification is sometimes necessary when there is more than one source and when more than 1 output is necessary. Analog volume controls are much nicer than digital attenuation, with analog giving more details and longer decay. High attenuation capability allows the handling of high output devices like DAC and low output devices phono pre-amplifiers with moving coil cartridge. A low noise floor helps provide great music insight and better presentation. The Cara Pre-amplifier has dual outputs with independent relative volume setting, 4 inputs to select from, an analog volume control that goes from -99db to +15db in 0.5 db steps with a 10V operating headroom with a very low noise floor. This makes Cara an exceptional pre-amplifier with wide operational capability. Play your music with any source component and still get the best out of your whole stereo system. Features of the Cara preamplifier: - 2 pairs of outputs (4 channels) - Each output channel can be set to independent relative volume levels - Remote Control with mute, on/off for remote trigger (12V, 20mA), - Cardas XLR inputs, gold-plated chassis with rhodium plate metal body, teflon insulation and silver pins - External power supply with double fused inlet - Large LED display with -99 to +15db control in 0.5 db steps - Optional Isoacoustics GAIA III footers - Optional Synergistic fuses (2 required) Specifications of the Cara preamplifier - Input Voltage: +/- 10V - Output Voltage: +/- 12V - Frequency Response: 8Hz to 200kHz 0.1dB - S/N: 110dB - THD: 0.002% - Inputs: 4 inputs with individual gain presets - Outputs: 2 outputs with individual level presets - Volume range: -99db to + 15dB (0 to +115) - Input Preset Range: +/- 12dB - Output Preset Range: 0 to 115dB - Preset Max volume level: 0 to 115dB - Preset Min Volume level: 0 to 115 dB - Display Brightness settings: 1 to 9, and off - Display delay dim time range: 5 sec to 25 sec - Permanently saved settings - External Power Supply with 110V/240V - Remote Control - Display Size: 1.25" high x 6" wide, blue LED dot matrix - Remote Trigger: 12V

Yamaha Matrix Processeur MTX5-D - Matrice Processeur - Excellent état Série MTX - Caractéristiques techniques - Processeurs - Audio professionnel - Produits - Yamaha - France MTX5-D (yamaha.com)   MTX5-D Mixing capability Mixing channels Mixing Channel: 16 Mono + 3 Stereo + 2 Effect Return + 8 Direct-in to Matrix Input channel functions Mono CH: 3-band PEQ, Comp, Gate, Auto Gain Control, Feedback suppressor (available in ch 1-8) Output channel functions Room Delay, Room EQ, Speaker Processor, X-Over (1way,2way), Delay, 6-band PEQ, Limiter I/O Phantom power +48V Internal processing Priority Ducking, Ambient Noise Compensator Sampling frequency rate Internal 48kHz/ 44.1kHz Signal delay Less than 3.0ms (AD-DA @48kHz) Total harmonic distortion Less than 0.05% (+4dBu, Gain:-6dB), Less than 0.1% (+4dBu, Gain:+66dB) Frequency response 20Hz to 20kHz, +0.5dB, -1.5dB Dynamic range 107dB (Gain:-6dB) Hum & noise level Equivalent input noise -60dBu (Gain ： +66dB), -83dBu (Gain ： -6dB) Crosstalk -100dB Heat dissipation 55.9kcal/h max Power requirements AC100V-240V 50Hz/60Hz Power consumption 65W Dimensions W 480mm (18.9") H 88mm (3.4") D 351mm (13.9") Net weight 6.3kg (13.9lbs) Others Memory bank: PRESET 50 ·          * Total harmonic distortion is measured with a 18dB/Oct fi lter @80kHz. ·          * Hum & noise level is measured with a 6dB/oct fi lter @12.7kHz;equivalent to 20kHz fi lter with infi nite dB/Oct attenuation. AnalogInput Specifications Input terminal GAIN Actual load impedance For use with nominal Input Level Connector Nominal Max. before clip INPUT 1-8 +66dB 10kΩ 50-600Ω Mics & 600Ω Lines -62dBu -42dBu Euroblock -6dB +10dBu +30dBu ST IN 1,2 - 10kΩ 600Ω Lines -10dBV +10dBV RCA Pin Jack AnalogOutput Specifications Output terminal Actual Source impedance For use with nominal Output Level Connector Nominal Max. before clip OUTPUT 1-8 75Ω 10kΩ Lines +4dBu +24dBu Euroblock DigitalInput and Output Specifications Terminal Format Level IN/OUT Connector Note YDIF In YDIF RS-422 16IN RJ45 YDIF Out YDIF RS-422 16OUT RJ45 Primary Dante 1000BASE-T 16IN/16OUT RJ45 MTX5-D Only Secondary Dante 1000BASE-T 16IN/16OUT RJ45 MTX5-D Only ControlI/O Specifications Terminal Level Connector MTX5-D GPI 16 IN / 8 OUT IN 1-15ch: 0-5V 16ch: 2.5-24V: High, 2.5V or less, Allowable input +24V Euroblock OUT Open Collector +V DC5V MTX5-D REMOTE RS-232C (BAUD RATE: 38.4kbps or 115.2kbps) D-sub 9pin (Male) DCP - RJ-45 Exi8/Exo8 Specifications   EXi8 EXo8 Sampling frequency 48kHz/44.1kH Signal delay Less than 2.5ms Total harmonic distortion Less than 0.05% (+4dBu, Gain:-6dB); less than 0.1% (+4dBu, Gain:+66dB) Frequency response 20Hz to 20kHz, -1.5dB min, 0dB typ., +0.5dB max Dynamic range 107dB (Gain:-6dB) Equivalent input noise (EIN) -126dBu (Gain: +66dB) Phantom power +48V (per channel; individually settable) Crosstalk -100dB (@1kHz) Heat dissipation (per hour) 21.5 kcal max. Power supply voltage 100V 50/60Hz Power consumption 25 W max. Dimensions (W x H x D) 480(W) x 44(H) x 351(D)mm, 1U 480(W) x 44(H) x 351(D)mm, 1U Included items Power cord, Euroblock plugs (3-pin, tabbed) x8 EXi8Analog Input Specifications Input terminal GAIN Actual load impedance For use with nominal Input Level Connector Nominal Max. before clip INPUT 1-8 +66dB 10kΩ 50-600Ω Mics & 600Ω Lines -62dBu -42dBu Euroblock -6dB +10dBu +30dBu EXi8Digital Input Specifications Terminal Format Level IN/OUT Connector YDIF In YDIF RS-422 16IN RJ45 EXo8Analog Output Specifications Output terminal Actual Source impedance For use with nominal Output Level Connector Nominal Max. before clip OUTPUT 1-8 75Ω 10kΩ Lines +4dBu +24dBu Euroblock EXo8Digital Output Specifications Terminal Format Level IN/OUT Connector YDIF Out YDIF RS-422 16OUT RJ45 Exi8 /Exo8 Control I/O Specifications Terminal Format Level Connector Network Ethernet 100Base-TX - RJ-45  

Tube GP-5  is a glass-envelope beam power triode intended for use as a shunt regulator or pulse modulator in high-voltage systems. It features anode operating voltage of 30 kV and a plate dissipation of 37.5 watts. Originally intended for color-TV voltage stabilization, the GP-5 is similar to the Telefunken ED500 and may be used to retrofit equipment which uses the American type 6BK4 or other high-voltage beam triodes.  Near equivalent: ED500 and 6BK4. General characteristics: Name: GP5 Cathode: oxide-coated, unipotential Voltage (AC or DC), V: 6.3 (± 0.6) Current, mA: 210 (± 20) Heater-cathode voltage, peak, V: ±200 Amplification factor (nominal): 2750 Transconductance (nominal), uS: 700 Interelectrode capacitances (typical), with cathode grounded: - Input 4.0 pF - Output 1.5 pF - Feedback 0.1 pF Mechanical characteristics: Base standard magnoval, glass button Socket Svetlana SK509 or similar Anode cap approx. 3/8 in (9 mm) diameter Anode connector same as 6BK4 or 807 Operating position Any (vertical for convection cooling) Nominal dimensions: - Height of glass envelope 100 mm (3 7/8 in) - Diameter of glass envelope 46 mm (1 3/4 in) - Overall height 125 mm (4 7/8 in.) Net weight, g: 115 Maximum ratings: Anode voltage, kV: 30 Anode dissipation, W: 37.5 Anode current, continuous, mA: 2 Grid voltage, V: -450 Maximum grid-circuit resistance, megohms: 3 Envelope temperature, C: 250

Yamaha MA2030 Lo-Z / Salut-Z commutable compact de classe D amplificateur mélangeur (Lo-Z: 30W x2ch, Salut-Z: 60W x1ch) équipé de 3 entrées stéréo, 2 entrées micro et fonctions DSP puissants pour la musique de haute qualité de lecture et l'utilisation du microphone.   Facile à installer, et une interface conviviale pour un fonctionnement sans effort Flexible 3 entrées stéréo et deux entrées de microphone Fonctions avancée DSP pour la lecture de musique et de l'utilisation du microphone Commutable pour Lo-Z (3O / 4O) ou Salut-Z (70V / 100V) Les systèmes de haut-parleurs Stereo EQ source avec la fonction d'amélioration Built-in EQ pour des performances de haut-parleur / série Yamaha VXS VXC optimale zones de service peuvent être étendues par l'ajout d'un PA2030 Télécommande de volume et un microphone commutation on / off via le panneau de contrôle DCP1V4S option Contrôle de la qualité Yamaha garantit un fonctionnement sûr et fiable Gain d'espace 1U taille demi-ra ck The MA2030 is a power amplifier that is ideal for daily use with a simple user interface and a power-saving ClassD circuit in a compact body. One unit supports both low impedance and high impedance, enabling flexible system construction. In addition to the mixing function, the MA2030 provides high-quality sound with an EQ equipped with a microphone and DSP function that is ideal for music playback, and an enhancer function. ■ Type: Power amplifier, high /low-impedance compatible ■ Rated output: 30Wx2 (3Ω, 4Ω, 8Ω), 60Wx1 (70V /100V) ■ Power consumption: 30W 1/8 output, 3Ω, AC 100V, when driving all channels (pink noise) ■ Dimensions: 215 x 54 x 288 mm ■ Weight: 1.8kg ■ Others: ■ Amplifier circuit: Class D ■ Frequency characteristics 0dB, ​​-2.5dB, + 1.0dB: Stereo input (line input) to line output 20Hz to 20kHz 0dB, ​​-3.0dB, +1.0 dB: Stereo input (line input) to speaker output 50Hz to 20kHz, 1W, 3Ω /4Ω /8Ω 0dB, ​​-3.0dB, + 1.0dB: Stereo input (line input) to speaker output 90Hz to 20kHz, 1W, 70V /100V ■ Connector Microphone input MIC IN 1: XLR combo jack, balanced MIC IN 2: 3.5mm Euro block terminal 3-pin, balanced Line input ST IN 1: Stereo mini phone jack (3.5mm), unbalanced ST IN 2 /ST IN 3: Stereo RCA terminal, unbalanced Speaker output Barrier strip terminals x 2 pairs Line output Stereo RCA terminal, unbalanced ■ Protection circuit Load protection: Power switch ON /OFF: Output mute *, Output overvoltage: Output limit *, DC detection: Shutdown (* with automatic reset function) Amplifier protection: overheating: output limit * → output mute * → shutdown, overcurrent: output mute *, integrated power: output limit * (* with automatic reset function) Power protection: overheating: shutdown, overvoltage: shutdown, overcurrent: shutdown ■ Cooling method: Natural air cooling ■ Power supply voltage: AC 100V; 50Hz /60Hz ■ Operating temperature: 0 ° C ~ + 40 ° C ■ Storage temperature: -20 ° C ~ + 60 ° C Accessories: Power cable, 3.5mm Euroblock plug (3-pin) x 1, Instruction manual, Spec sheet (English) ■ Options sold separately: RKH1 (rack mounting bracket), DCP1V4S-US (digital control panel)

Je vends ce recepteur satellite dvb-s uniquement Features 4000 TV & Radio Channel Memory Fully MPEG-2/DVB-S compliant SCPC & MCPC receivable from C/KU-Band Satellite 256 Colors On Screen Display User-Friendly Graphic User Interface Icon type of Menu adopted Powerful EPG: Now/Next & 7-Day Program Guide Teletext support: VBI Insertion DiSEqC 1.0 & 1.2 compatible Program Lock by Manual Software Upgrade via RS-232C Serial Port OSD Language: English, German, French, Italian, Spanish, Portuguese, Czech, Danish, Hungarian, Turkish, Arabic, Farsi Program sortable and editable Graphic aided Tutorial Manual included (Demo Function) Picture-In-Graphic Function Support Letterbox for wide Program Stereo, Mono, Dual and joint Stereo Audio Mode Real Time Signal Strength Display Fast Auto Channel Scan & Memory Channel changing Time less than 1 Second Ergonomic Remote Control Unit Channel change with Graphic Menu & EPG Program Rating, Category and Progress Time Information Utilities: Game (Othello, Snake), Calendar, Bio-rhythm, Memo Technical Specifications   Tuner & LNB Input Connector: F-type, IEC 169-24, Female(Loop Through) Frequency Range: 950MHz to 2150MHz Signal Level: -25dBm to -65dBm Demodulation: QPSK Input Symbol Rate: 1-45Msps FEC Decoder: Convolutional Code Rate 1/2, 2/3, 3/4, 5/6 and 7/8 LNB Power and Polarization: Vertical: +13V Horizontal: +18V Current: Max, 500mA, Overload Protection DiSEqC Control: DiSEqC 1.0 & 1.2 compatible Band Switch Control: 22KHz Tone 22KHz Tone: Frequency: 22+2KHz Amplitude: 0.6+0.2V   MPEG Transport Stream A/V Decoding Transport Stream: MPEG-2 ISO/IEC 13818 Profile/Level: MPEG-2 MP@ML Input Bit Rate: Max. 90MBit/s Video Resolution: 720 x 576 Audio Decoding: MPEG/MUSICAMLayer I & II Audio Mode: Single Channel/Dual Channel   Main Resource Main CPU: NEW TMIPS R3930(81MHz) Flash Memory: 1MByte SDRAM for System: 2MByte SDRAM for MPEG: 2MByte SDRAM for Graphic: 2MByte   RF Modulator RF Connector 75Ohms, 169-2, Male/Female Frequency: 470MHz to 860MHz Output Channel: CH 21-69 for Remodulation TV Standard: PAL-B/G, D/K, I selectable   A/V & Data Input/Output Video: RCA/Cinch, Video Output (CVBS, RGB) Audio R/L: RCA/Cinch Volume 8 Mute Cont. (Resolution: 20bits DAC, Max 2Vrms) RS-232C: 9 pin D-Sub Type   Power Supply Input Voltage: AC 90 to 250V, 50/60Hz Type: SMPS Power Consumption: Max. 30W Stand-by Power: Max. 7W Protection: Separate internal fuse. The input shall have lightening protection   General Operating Temperature; 0°C-50°C Storage Temperature: -20°C-60°C Size (W x H x D): 340 x 60 x 247mm Weigh: 2,1kg

Topping Aluminum chassis Tripath TA2024 digital amplifier TI PCM2704 USB DAC TI OPA2134 opamp ALPS volume control with blue LED ring TOKO digital amplifier inductance KOA resistance Nichicon FW and MUSE ES, WIMA, and EPCOS capacitance TAKAMISAWA relay Maximum sample bit/rate: 16 bit/48 kHz Analog input: RCA input x 1 (L and R channel) Digital input: USB Amplifier output: Binding post (L and R channel), BTL output Headphone output: ⅛ in (3.5 mm) Auto on/off synchronously with your PC (in USB mode only) Supports Android smartphones 4.0 and higher Dimensions: 7 x 4.8 x 1.5 in (17.7 x 12.2 x 3.8 cm) Weight: 18.7 oz (530 g) Speaker Amplifier Suitable speaker impedance: 4 – 8 ohm Maximum output power: 16.3 W (4 ohm, 10% THD+N); 9.7W (8 ohm, 10% THD+N) Output resistance: 0.2 ohm Minimum THD+N: 0.003% THD+N at 1 kHz: 0.012% Frequency response: 20 Hz – 20 kHz +/- 0.6 dB Input sensitivity: 390 Vrms Noise: Gain at 1 kHz: 28 dB Headphone Amplifier Suitable headphone impedance: 16 – 300 ohm Maximum output power: 140 mW (32 ohm, 1% THD+N) Maximum output voltage swing: 10 Vpp Minimum THD+N: 0.001% (32 ohm, 45 mW Pout) THD+N at 1 kHz): 0.03% Frequency response: 20 Hz – 20 kHz +/- 1.2 dB Input sensitivity: 1.0 Vrms Noise: Gain at 1 kHz: 6.5 dB INCLUDED AC 100–240V input DC12V3A output adapter (CE, FCC, PE, UL certified)

DBX AFS 224 ANTI LARSEN Input 2 total Input Connectors Female XLR ad 1/4" TRS Input Type Electronically bal/unbal RF filtered Input Impedance Bal 40k ohm, unbal 20k ohm Max Input +20dBu CMRR 40dB, typically 55dB @ 1kHz Output 2 total Output Connectors Male XLR and 1/4" TRS Output Type Electronically bal/unbal, RF filtered Output Impedance Balanced 120 ohm, unbalanced 60 ohm Max Output +20dBu A/D Converter dbx Type IV conversion system A/D Dynamic Range 114dB, A-weighted, 112dB unweighted Type IV Dynamic Range 119dB, A-weighted, 22kHz; BW: 117dB, unweighted, 22kHz BW Sample Rate 48kHz D/A Dynamic Range 112dB, A-weighted, 110dB unweighed Dynamic Range 110dB, A-weighted, 107dB unweighted THD+Noise 0.002% typical at +4dBu, 1kHz, 0dB input gain Frequency Response 20Hz - 20kHz, +/-0.5dB Interchannel Crosstalk 80dB typical Operating Voltage 100VAC 50/60Hz; 120VAC 60Hz; 230VAC 50/60Hz Power Consumption 9 W Audio et hifi occasion à vendre à Courcouronnes (91080)