With an

An outstanding Audiophile portable DAC 2 bits / 192 kHz, compatible up to 300 ohms Headphones. This DAC is a very High-definition Audio source, with an anti-jitter numerical interface. Apart from the outstanding performance and internal components, a unique aesthetic combination of wood and minimalist front design: The Front is in Aluminum, with a « retro » slider volume knob; The Rear is made with precious hand-carved sandalwood. · Provided with an excellent quality real leather, well-designed protection case. Technical Characteristics Op-Amps: ADI AD823 DAC: Cirrus Logic CS4398 Over sampling up to 24 bits/192 kHz: Cirrus Logic CS8422 High precision Quartz clock TCXO Memory Capacity Internal Memory: 32 Go Slot for extension by micro-SD Card (max. 32 Go, FAT 32) Display OLED Screen 2,4b'"' (6,1 cm), resolution: 320 x 240 pixels 5 level of luminosity Measures Signal / noise ratio: 112 dB Stereo channel separation: b'>' 75 dB (32 ohms) Very Low Jitter: b' Formats DSD 2,8 et 5,6 MHz WAV, FLAC (up to 192 kHz / 24 bits) OGG Vorbis, APE (44,1 kHz et 48 kHz / 16 bits) MP3 (up to 320 kbps) Management of native formats: 16 bits / 44 kHz, 24 bits/88,2 kHz, 24 bits/96 kHz,24 bits/176,4 kHz and 24 bits/192 kHz Connections 2 OUTPUTS mini-jack 3,5 mm (headphones and line) 1 EXTENSION port: MicroSD (for memory cards up to 32 Go) 1 USB Slot (micro-USB connection) used for battery charging, data transfer with PC and USB-DAC out. Power Internal Battery: 3,7 V 3400 mA Autonomy of more than 6 hours on battery Dimensions (LxHxP): 67 x 105 x 19 mm Weight: 167 grams See other info and reviews: • https://en.colorfly.net/en/downloadc10.html • https://headfonics.com/colorfly-c10-review/ NB: As the user notice has been lost, I will provide an Ad-hoc illustrated document explaining all the functionalities, which are rather simple, intuitive and user friendly. En savoir plus

BOLEX H16 RX with KERN VARIO SWITAR EE 1:2.5 f 18/86 mm   Functional integrated automatic exposure meter and diaphragm !!                                       n ° 135905                           (traduction en français ci-dessous) Condition  of conservation and excellent cosmetic! The drive motor turns freely without problem. This set is fully functional and can be used for filming in 16 mm !! *** Please note that this camera has undergone a revision reflex sight system level! The lenses and prisms have been removed, checked and cleaned! Over time (often several decades) without maintenance the eyepieces and aiming prisms eventually become opaque. The aim becomes blurred and unspecified! (photo 12) Also check and clean the film presser. As well as the feed dog A film test (unimpressed) was performed to verify the correct unfolding of the film. And the absence of scratches! On the other hand, the motor drive system has been lubricated and tested! The brushed and shiny metal parts! These maintenance operations are rarely or even never offered by the sellers of BOLEX cameras! Ask them! You will be surprised ! Their cameras are sold as they are, directly taken from the attic with their dust and their dysfunctions..! No wonder these operations require experience technical and know-how! This camera is equipped with a handle and a lens: KERN VARIO SWITAR 1: 2.5 f 18/86 mm EE for BOLEX H16 RX                                       n ° 1056895 This fabulous lens specially designed for BOLEX H16 cameras is in a very good state of conservation The glasses are clear with no scratches or visible presence of mold The zoom control works perfectly A lever  allows it to be operated  This lens was designed specifically for H-16 and SLR cameras features a fully automatic iris control with a photo-resistance (exposure meter) to cadmium sulfide sensitive to values of films from 10-400 ASA. ******* Please note that most KERN lenses of this type offered for sale on this site have an integrated light meter which does not does not work ! (Cadminium sulfide, an essential element of the light meter, degrades with  time, especially in a humid atmosphere and eventually does not work anymore) ******* Whoever is integrated into this objective is in working order: the diaphragm opens and closes depending on the brightness! (photos 9) You can therefore use it automatically to film in 16 mm !! The diaphragm will react to the next closing or opening the lighting!.photo 9 No need to burden yourself with an auxiliary light meter! And correct manually the diaphragm permanently! The filmed scenes will be perfectly exposed! New mercury-free batteries are now available for supply the light meter. (photo 10) They are perfectly compatible! This is the type of battery: brand EPX625G 1.5 volt "Energizer" or others that you can get on or anywhere in the world! An original KERN metal sun visor is delivered with this zoom The "altuglass" presentation base is not part of the offer ******                                              **** Please read the general sales instructions before bidding or buying                (below) your submissions are worth acceptance.                            Thanks for your interest *** *********** Foreign Buyer (Outside the European Union) contact me before bidding. To determine the shipping costs (depending on the country) For buyers outside Europe the payment is made only by PayPal. The delivery address is exclusively the address "confirmed" by PayPal. **************  Failure to comply with these clauses cancels the order! Thank you for your understanding **********************

CANON 600D with ZOOM 70-300mm LENS and KIT KIT INCLUDES: Yongnuo flash and cover lens cover Light hood Super wide angle lens with macro Canon 600d body  Canon Zoom 70 - 300mm  Canon charger Two Neewer filter kits Boxes * all 58mm fittings This camera is equipped with a powerful CMOS sensor with an 18 MP APS-C size.  This translates to better photos and enhanced light capturing. I bought this as an enthusiast and now I have turned pro and I do believe it has to do with the camera quality.    The Canon EOS 600D is an advanced entry level DSLR that is extremely user friendly. PLEASE NOTE:  I will not ship to the UK.

* * * * I send in all Europe and all over the world. *** Envié toda Europa y en todo el mundo. ***   Ho mandato in tutta Europa e nel mondo. ***  Enviei toda a Europa e em todo o mundo.   For the purchase of several items the discount is provided excluding postage: * 2 items = - 5% of the total * 3-5 items = - 10% of the total * 6 items and more = - 15% of the total Feel free to ask me questions in French or English *  *  *  *  *  * NORMES CE * Vends CB  Midland modèle  ALAN 28  complète avec sa boite et une copie de la notice d'utilisation en Français, de plus elle a été modifié pour être équipée  d'un un tiroir anti-vol de type "voiture" *** complete with its box and 1 copy of the user manual in French, moreover it has  been modified to be equipped with an anti-theft drawer of the "car" type ***  ******** elle a 4 W de puissance et 40 canaux (voir photo 4) elle est en bon état de fonctionnement, émission comme réception (seul les boutons "Up and Down" du micro sont inopérants, compte tenu des modification apportées  à cette CB et de la remarque ci-dessus, son prix d'achat qui n'est vraiment pas très élevé,  de plus elle est équipée d'un Haut-parleur extérieur en bon état de fonctionnement) *** The CB has 4 W of power and 40 channels (see photo 4),  it is in good operating condition, in transmission as reception    (only the "Up and Down" buttons on the microphone are ineffective, given the modifications made to this CB and  the above remark, its purchase price which is really not very high,  moreover it is equipped with '' an external speaker in good working order) *** ****** Elle est livrée avec un micro Midland 6 broches It comes with a 6-pin Midland microphone + 1 tiroir anti-vol de voiture ou camion + 1 anti-theft drawer for car or truck +  1 Haut-parleur avec étrier de fixation + 1 loudspeaker with mounting bracket + la boite d'origine Midland et 1 copie du manuel d'utilisation en français  ( + 1 original Midland box and 1 copy of the user manual in French) *  *  *  *  * CARACTERISTIQUES  TECHNIQUES : -  Bouton Off - Volume -  Bouton Squelch -  Bouton  Micro gain -  Bouton RF gain -  Bouton Sélecteur des canaux par rotacteur et touches Up / Down -  Commutateur CB / PA -  Commutateur Fil / Out -  Commutateur Filtre Anl -  Commutateur Mode AM / FM -  Commutateur Swr / S-Rf -  Commutateur CH Lock -  Commutateur Memo + touches M1 à M5 -  Commutateur CH Scan -  Affichage TX / RX (LED) -  Affichage digital du canal -  Vu-mètre à Led -  Prise micro 6 broches en façade -  Micro  -  Nombre de canaux: 40 cx (version Export: 120cx) -  Puissance: 4 watts -  Prise SO259 pour branchement de l'antenne -  Prise jack pour branchement haut parleur extérieur -  Prise jack pour branchement PA extérieur -  Cordon alimentation * * * * *  PAYEZ directement avec PAYPAL en utilisant votre compte ou avec une carte bancaire habituelle, site entièrement SECURISE)   NOTA: Les frais demandés sont forfaitaires et comprennent les frais postaux, les frais d'emballage et les divers frais se rapportant à la vente de cet objet. $  $  $  $  $ VOUS TROUVEREZ PEUT ETRE CET ARTICLE UN PEU MOINS CHER AILLEURS, MAIS REGARDEZ BIEN SI ON VOUS PROPOSE LES MEME GARANTIES SUR L'ARTICLE ET LE MEME SERIEUX DE L'EXPEDITION, SUR MON SITE VOUS POUVEZ ACHETEZ EN TOUTE CONFIANCE et si vous achetez 2 articles ou plus je vous offre les frais d'envois du 2ème article et des suivants? (offre valable en France métropolitaine uniquement) VOUS POUVEZ VOIR MES NOTATIONS FAITES PAR LES EURS, ELLES PROUVENT LE SERIEUX ET LA QUALITE DE MES VENTES.  N'hésitez pas à consulter mes autres objets en vente ! (Offer valid in France only by cons of shipping to EUROPE will be reduced if you buy multiple ite

Tilta MB-T03 Overview Fair condition, Many cosmetic wears, but Works perfectly.            Very lightweight mattebox, I recommend. - 1 - 2 - 3 - 4 - 5 The Tilta 4 x 4" Carbon Fiber Matte Box features carbon fiber and aluminum construction, making it both lightweight and durable. The matte box will work with lenses up to 100mm in diameter. It features one fixed and one rotating 4 x 4" filter stage and mounts onto lightweight 15mm rods. The matte box incorporates a swing-away design for rapid lens changes. The included removable top and side flags can be precisely set and locked to block stray light from flaring your lens. The included anti-reflection rings protect your image by blocking stray light behind the camera bouncing off filters in the matte box and flaring your image. Lightweight Construction The matte box is made of carbon fiber, with aluminum used for the support structure. This provides a lightweight yet sturdy unit that is appropriate for shooting hand-held or with a stabilizer rig, when every ounce counts. Swing-Away Design The swing-away design allows you to quickly move the matte box out of the way to check or change lenses, without having to remove the matte box from the support rods. This way you don't have to hand off the matte box to someone else, hold it under an arm or between your knees, or hang it under the rods while you work, greatly speeding your workflow and reducing the chance of dropping the matte box or having a filter tray fall out. Top & Side Flags The removable top and side flags provide you additional flare control and attach to the matte box with a lockable hinged assembly. This allows you to precisely set your flags to match the edge of frame for different lenses and lock them in place so that they don't move during the shot. Anti-Reflection Inserts The three included anti-reflection inserts work with lenses with an outer diameter of 72, 80, and 90mm. They provide a light-tight seal so that light from behind the camera cannot leak through where the lens joins the matte box and reflect off filters to flare your image. When you are using lenses with outer diameters other than 72, 80, and 90mm or with lenses that have excessive focus travel it is recommended to use the cloth "nun's knickers" to prevent light leaks. In the Box - Tilta 4 x 4" Carbon Fiber Matte Box - 2 x Filter Tray (4 x 4") - Nuns Knickers - 3 x Anti Reflection Insert

Great vintage guitar, amazing sound very SG. Hofner 174 from 1972, Serial number: 8847 made in Germany a comes with two "Blade" pickups with an amazing vintage sound (got to be careful with the gain settings on your amp!) standard 3 way switch, 2 tones, 2 volumes for every mic which gives you several great combinations. Neck and body are made of solid mahogany, set neck. It´s very lightweight (as an SG should be, i guess) but it sounds killer, plenty of mid-lows, mids and highs. Excellent player, it´s a very easy to play guitar, set up with low action and sounds amazing. Come with the original hardcase.

TIDAL HiFi Master || Family 6 Users 3 M0nths || BUY WITH CONFIDENCE | FAST 5 min TIDAL HiFi Master || One User || BUY WITH CONFIDENCE || FAST 5 min ⚡ TlDAL Hifi Master 6 Months ⚡ ⚡Sound Quality Warranty⚡ Additional information: Tidal is an online music, podcast and streaming video subscription service that combines lossless sound and high-definition music videos with exclusive content and special music features. ✅ TIDAL Hifi MASTER ✅ i will deliver the details to your inbox almost if i'm online instantly or up 12 hours. ✅ Operational support in case of any questions Warranty for each account 90 days from the date of purchase of the goods! (in case of any problems, contact us First) Important: MY DEAR BUYER! IF YOU HAVE ANY PROBLEMS WITH AN ITEM, PLEASE E-MAIL US FIRST BEFORE LEAVING NEGATIVE FEEDBACK OR OPEN CASE, ALL PROBLEMS WILL BE RESOLVED!!! Thanks for Visting our Store

Canon AE-1 Film Camera with 2 lenses 50mm f1.8 and 70-210 f4 [See Description!] English: Canon AE-1 camera body is fully functional with an automatic shutter speed priority mode! There is some wear and tear but this is expected for a vintage camera of this age. I have fitted a new battery for the exposure that works great.  Camera comes with two FD lenses: 50mm f/1.8 and a 70-210 f/4. Both lenses sadly have some fungus, which can be fixed by an enthusiast or professional. The 50mm 1.8 aperture blades seem a bit sluggish and need some TLC.  French: Le corps de l'appareil AE-1 fonctionne très bien, ainsi que le mode priorité d'obturation. Une nouvelle pile pour le posemètre a été installé. Le boîtier est en bon état! Le boitier vient avec deux objectifs Canon FD. Une 50mm f/1.8 et une telephoto 70-210mm f/4. Malheureusement, il y a un peu de champignons à l'intérieur de ces deux objectifs, ca peut être nettoyé par des enthousiastes ou professionnels. L'ouverture de la 50mm semble un petit peu lente.  Appareil photo argentique Canon AE-1 avec deux objectifs 50mm et 70-210mm. I can send more detailed pictures of the lenses, just message me.

Great integrated amplifier, comes with the optional wireless card (worth of 300 euros!) and the optional remote, sold separately for 45 euros. It was a secondary system that was not been used much, in perfect working condition and looks. Great DAC on the wireless side of CD quality without compression (16 bits / 44 kHz) and also an excellent headphone output. I'm also throwing in the CD50 player that it worked absolutely perfectly until recently, when it no longer turns on. I took a look inside, but everything seems in order, no burnt parts, I don't know what could be the cause and I don't have time, someone else could fix it and use it, it sounds great and it cost about 650 euros! So consider it as a bonus to the associated amplifier! Made in France. No original box but will be extremely well packaged. Would consider posting it internationally but please, ask for a quote as the postage differs from country to country and the amount in the description is for European Union only, thanks. A pure sound reproduction that does not lack warmth. When listening, the device immediately stands out for the subtlety and delicacy of its sound reproduction. It is a follower of purity and its midrange register is particularly elegant. It manages to be very rich in colors and timbres, while demonstrating a very high transparency with an excellent presence effect. The Atoll IN50 is unpretentious, does not seek to impress, neither by its appearance nor by its performances, but delivers a restitution that is both very delicate and full of energy. Stereo integrated amplifier Symmetrical structure 1.5 mm steel chassis Mos-Fet transistors 160 VA toroidal transformer Electronic protection Measurements Power: 2x50 W under 8 ohms and 2x70 W under 4 ohms Pulse power: 90 W Input sensitivity: 100 mV Power supply: 160 VA Current capacity: 15,000 µF Input impedance: 220 kohms Frequency response: 5 Hz to 100 kHz Connections 6x RCA stereo analog inputs and 1x monitoring output 1x 3.5 mm mini-jack headphone output (front) 2x RCA stereo pre-out outputs Gold-plated screw terminals General Minimum consumption: 11 W Maximum consumption: 200 W Dimensions (lxhxp): 440 x 90 x 270 mm Weight: 7 kg DAC Burr Brown PCM1754 Lossless CD quality transmission (16 bits / 44 kHz) Arcam / teac / marantz / denon / yamaha / onkyo / atoll / nad / fidélité musicale / gustard / ifi / moniteur audio / klipsch / ifi / AudioQuest / Astell b'&' Kern / iBasso / Hidizs / Fiio / Shanling / beyerdynamic / meze / hifiman / audio technica / akg / bel canto / violectric / lehmann / parasound / benchmark / auralic / burson / aune / Arcam, Benchmark, Einstein, Pass, Mark Levinson, ifi, Eversolo, Fidelice, Mytek, Hegel, Nuprime, Auralic, Rupert Neve, Chord, Naim, PS Audio, Parasound, Sparkos, Atoll, Nad, Sugden, Exposure, Krell, Leak, Advance, Cayin, Luxman, Yamaha, Cambridge, Quad, Cyrus, quad / cambridge audio / Cayin / beyerdynamic / meze / hifiman / audio technica / akg / bel canto / violectric / lehmann / parasound / benchmark / auralic / burson / aune / feliks / vincent / little dot / prima luna / pathos / willsenton / reisong / woo / fezz / pier audio / jadis / sennheiser / schiit / topping / luxman / ZMF, sparkos, geshelli, paradis musical, fosi, KEF, Linn, gato, m2tech, Arcam / quad / cambridge audio / teac / marantz / denon / yamaha / onkyo / atoll / nad / musical fidelity / gustard / ifi / monitor audio / klipsch / ifi / AudioQuest / Astell b'&' Kern / iBasso / Hidizs / Fiio / Shanling / Cayin / beyerdynamic / meze / hifiman / audio technica / akg / bel canto / violectric / lehmann / parasound / benchmark / auralic / burson / aune / feliks / vincent / little dot / prima luna / pathos / willsenton / reisong / woo / fezz / pier audio / jadis / sennheiser / schiit / topping / ZMF, sparkos, geshelli / emotiva / krell / leak / sugden / hegel / exposure wiim, eversolo, sony, aune, gustard, smsl, volumio, matrix, KEF, Linn, gato, m2tech, sony, edifier, jbl, wharfedale, jamo, kanto, ruark, tria En savoir plus Collaboration commerciale.

CANON FDn 28mm f/2.8 with Front & Back Caps Condition générale: Proche du neuf et près à l'emploi Overall condition: Near from new and ready to serve Condition cosmétique: None Déclencheur: None Obturateur: None Cellule: None Viseur: None Camera cosmetic condition: None Shutter: None Shutter curtains: None Lightmeter: None Finder: None Condition de l'objectif: Proche du neuf avec quelques infimes traces d'utilisation (voir photos) Lentilles: Propres et claires avec quelques traces de poussières invisible sur le rendu final (voir photos) Diaphragme: Propre et fluide Bagues: Douces et sans points durs Lens cosmetic condition: Near from new with only few signs of use (see pictures) Lens: Clean and clear with only few trace of dust invisible on final picture (see pictures) Aperture: Clean and fluid Focus/Zoom/Aperture Rings: Smooth without hard points Accessoires: Livré avec un bouchon avant et un bouchon arrière original Canon Autres: Compatible avec la monture Sony FE (avec une bague d'adaptation non incluse) Accessories: Delivery with Canon original front cap and back cap Other: Compatible with Sony FE mount (with an adaptation ring not include) Piles et Batterie En raison des restrictions douanières propres à chaque pays, nos produits sont livrés sans batterie. Vous pouvez facilement trouver les modèles de batteries correspondantes via le site www.collection-appareils.fr. Etat L’état du matériel est attesté par la description précise présent dans l’annonce ainsi que les photographies HD qui l’accompagnent. Aucune demande de remboursement ne pourra être acceptée si elle concerne un détail indiqué dans l’annonce ou visible sur les photographies. Envois et Livraisons La livraison est assurée vers la France, l’Europe et le Monde entier via diverses compagnies aux tarifs et fonctionnements différents. Merci de vous référer à la section de l’annonce concernée. Le tarifs comprend l’emballage et l’envoi. Par souci de logistique, nous réalisons nos envois les mercredi et vendredi. Soit au maximum sous 4 jours ouvrés. Frais La vente et la livraison peuvent impliquer divers frais. Les frais de vente et PayPal sont à ma charge, le prix final de la vente n’est donc pas impacté. Cependant, une livraison hors des limites de l’Europe peut impliquer des frais de douanes ou de TVA qui sont à la charge de l’acheteur. Règlement Nous n’acceptons que les règlements par PayPal qui doublent les garanties déjà offertes par. Comme dit plus haut, les frais de la transaction sont à notre charge. Remboursement La garantie de nos produits varie d’un produit à l’autre. Merci de vous référer à la section de l’annonce concernée. Nos produits sont révisés et testés avant l’envoi afin de garantir leur fonctionnement. Cependant, gardez tout de même à l’esprit qu’il s’agit de matériel ancien, bien souvent d’occasion, qui a était remis en état par nos soins. L’utilisation par un public non averti peut entrainer des dysfonctionnements indépendant de notre volonté. Merci de bien vous renseigner avant l’achat. @camerainbeerbox, 2020.

Ce compendium pare-soleil à soufflet réglable pour les focales de 35 mm à 100 mm est remarquablement efficace sur le full-frame 24x36 et en APSC, fabriqué par Novoflex avec un souci de précision micrométrique exceptionnel. La "deutche Qualität" est vraiment à l'œuvre ici !! L'état du soufflet est excellent. Les vis de réglages sur le rail sont parfaites. Les encoches d'accueil des plaques de filtres gélatine rectangulaires sont efficaces et en parfait état. Il est livré avec une bague adaptatrice pour le diamètre de 55 mm, idéale pour les objectifs Minolta MC-Rokkor et MD. On peut aussi trouver sur le marché d'autres bagues pour d'autres diamètres. Merci de porter attention aux photos. This adjustable bellows lens hood compendium for focal lengths from 35 mm to 100 mm is remarkably effective on full-frame 24x36 and APSC, manufactured by Novoflex with an exceptional concern for micrometric precision. The "deutche Qualität" is really at work here ! The condition of the bellows is excellent. The adjustment screws on the rail are perfect. The reception notches of the rectangular gelatine filter plates are efficient and in perfect condition. It comes with a 55mm diameter adapter ring, ideal for use with Minolta MC-Rokkor and MD lenses. Other rings for other diameters are also available on the market. Please pay attention to the pictures. Translated with www.DeepL.com/Translator (free version)

METRASTAR Metrawatt AG with its original notice and leather case. Previously use in conbination of a Leica Rangefinder. Condition générale: Superbe objet avec une magnifique patine Overall condition: Wonderful object with magnificent patina Condition cosmétique: None Déclencheur: None Obturateur: None Cellule: None Viseur: None Camera cosmetic condition: None Shutter: None Shutter curtains: None Lightmeter: None Finder: None Condition de l'objectif: None Lentilles: None Diaphragme: None Bagues: None Lens cosmetic condition: None Lens: None Aperture: None Focus/Zoom/Aperture Rings: None Accessoires: Livré avec sa sacoche en cuir original METRASTAR et sa notice d'utilisation Autres: Vendu en l'état car non testé Accessories: Delivered with an original GOSSEN Metal clip Other: Sold as untested Piles et Batterie En raison des restrictions douanières propres à chaque pays, nos produits sont livrés sans batterie. Vous pouvez facilement trouver les modèles de batteries correspondantes via le site www.collection-appareils.fr. Etat L’état du matériel est attesté par la description précise présent dans l’annonce ainsi que les photographies HD qui l’accompagnent. Aucune demande de remboursement ne pourra être acceptée si elle concerne un détail indiqué dans l’annonce ou visible sur les photographies. Envois et Livraisons La livraison est assurée vers la France, l’Europe et le Monde entier via diverses compagnies aux tarifs et fonctionnements différents. Merci de vous référer à la section de l’annonce concernée. Le tarifs comprend l’emballage et l’envoi. Par souci de logistique, nous réalisons nos envois les mercredi et vendredi. Soit au maximum sous 4 jours ouvrés. Frais La vente et la livraison peuvent impliquer divers frais. Les frais de vente et PayPal sont à ma charge, le prix final de la vente n’est donc pas impacté. Cependant, une livraison hors des limites de l’Europe peut impliquer des frais de douanes ou de TVA qui sont à la charge de l’acheteur. Règlement Nous n’acceptons que les règlements par PayPal qui doublent les garanties déjà offertes par. Comme dit plus haut, les frais de la transaction sont à notre charge. Remboursement La garantie de nos produits varie d’un produit à l’autre. Merci de vous référer à la section de l’annonce concernée. Nos produits sont révisés et testés avant l’envoi afin de garantir leur fonctionnement. Cependant, gardez tout de même à l’esprit qu’il s’agit de matériel ancien, bien souvent d’occasion, qui a était remis en état par nos soins. L’utilisation par un public non averti peut entrainer des dysfonctionnements indépendant de notre volonté. Merci de bien vous renseigner avant l’achat. @camerainbeerbox, 2020.

GOSSEN Sixon lightmeter with GOSSEN Metal Clip Condition générale: Superbe objet avec une magnifique patine Overall condition: Wonderful object with magnificent patina Condition cosmétique: None Déclencheur: None Obturateur: None Cellule: None Viseur: None Camera cosmetic condition: None Shutter: None Shutter curtains: None Lightmeter: None Finder: None Condition de l'objectif: None Lentilles: None Diaphragme: None Bagues: None Lens cosmetic condition: None Lens: None Aperture: None Focus/Zoom/Aperture Rings: None Accessoires: Livré avec une attache métallique originale GOSSEN Autres: Vendu en l'état car non testé Accessories: Delivered with an original GOSSEN Metal clip Other: Sold as untested Piles et Batterie En raison des restrictions douanières propres à chaque pays, nos produits sont livrés sans batterie. Vous pouvez facilement trouver les modèles de batteries correspondantes via le site www.collection-appareils.fr. Etat L’état du matériel est attesté par la description précise présent dans l’annonce ainsi que les photographies HD qui l’accompagnent. Aucune demande de remboursement ne pourra être acceptée si elle concerne un détail indiqué dans l’annonce ou visible sur les photographies. Envois et Livraisons La livraison est assurée vers la France, l’Europe et le Monde entier via diverses compagnies aux tarifs et fonctionnements différents. Merci de vous référer à la section de l’annonce concernée. Le tarifs comprend l’emballage et l’envoi. Par souci de logistique, nous réalisons nos envois les mercredi et vendredi. Soit au maximum sous 4 jours ouvrés. Frais La vente et la livraison peuvent impliquer divers frais. Les frais de vente et PayPal sont à ma charge, le prix final de la vente n’est donc pas impacté. Cependant, une livraison hors des limites de l’Europe peut impliquer des frais de douanes ou de TVA qui sont à la charge de l’acheteur. Règlement Nous n’acceptons que les règlements par PayPal qui doublent les garanties déjà offertes par. Comme dit plus haut, les frais de la transaction sont à notre charge. Remboursement La garantie de nos produits varie d’un produit à l’autre. Merci de vous référer à la section de l’annonce concernée. Nos produits sont révisés et testés avant l’envoi afin de garantir leur fonctionnement. Cependant, gardez tout de même à l’esprit qu’il s’agit de matériel ancien, bien souvent d’occasion, qui a était remis en état par nos soins. L’utilisation par un public non averti peut entrainer des dysfonctionnements indépendant de notre volonté. Merci de bien vous renseigner avant l’achat. @camerainbeerbox, 2020.

CANON 600D with ZOOM 70-300mm     Light hood   Canon 600d body  Canon Zoom 70 - 300mm  Canon charger Two Neewer filter kits Boxes * all 58mm fittings This camera is equipped with a powerful CMOS sensor with an 18 MP APS-C size.  This translates to better photos and enhanced light capturing. CANON 600D avec ZOOM 70-300mm   Capuche légère   Boîtier Canon 600d Canon Zoom 70 - 300mm Chargeur Canon Deux kits de filtres Neewer Des boites * tous les raccords de 58 mm Cet appareil photo est équipé d'un puissant capteur CMOS avec une taille APS-C de 18 MP. Cela se traduit par de meilleures photos et une meilleure capture de la lumière.

Lens summarit 5cm f1.5 in m39 mount, it is in general good condition. There is visible dust inside the lens, the image quality is not a problem during the test with the digital camera. A revision would be desirable concerning the diaphragm ring because it tends to harden especially in cold weather, some traces of use on the outside. Sold with an m39 / Sony ring Hand delivered preferred colissimo delivery anywhere in France Payment by PayPal or bank transfer.

the state of the device: - clean and functional - the device contains: 01-canon xa 25 02- microphone sennheiser mke 300 03- two battery 04-car charger 05- home charger 06- lens hood 07- two lens cover 08-beautiful gun pouch 09- dual battery charger 10- hook for support 11- complete wiring 12- Installation CD - the shipment will be via fedex with an insurance of delivery to the whole world Good luck to you je met en vente une camera canon xa25 sans poignee  l'etat de l'appareil:  -tres propre et antierment fonctionnel - l'apareil contien: 01-canon xa 25 02- microphone sennheiser mke 300 03- deux batterie 04-chargeur automobil 05- chargeur maison 06- parasoleil 07- deux couvercle pour lentille 08-belle pochette canon  09- chargeur double batterie  10- crochet pour support  11- cablage complet  12- CD d'instalation - l'envois sera via fedex avec une assurence de livraison au monde entier  bonne chance a vous

 Item Description Hi-Fi AP80 Lossless MP3 Player with Bluetooth, High-Resolution Digital Audio Player, High-Resolution Music Player with DSD Support Colour Name: Red Crystal-Clear Sound Engineered to provide outstanding Hi-Res audio performance and to capture the depth and breadth of each note, the AP80 features an Ess flagship ES9218P DAC chip, delivers an SNR of up to 126dB and THD+N down to -113dB for you to experience the subtleties of each instrument. HiBy OS The Hiby 3.0 OS is a worldwide recognized professional music player system with more than a decade of experience in software development. It delivers an premium music experience with high runtime permissions, multithreaded man-machine interaction, and powerful sounds. Mage Sound 8-Ball Tuning MSEB is a combination of multiple algorithms based on parametric equalizer (PE!) and sound field adjustment to create the most satisfying sound for you. Customizable to Your Likings Like you, the AP80 is unique, that’s why we want our users to be able to customize it to best suit their personal taste. Choose from more than 1000 colors or pick your favorite cover to personalize your music experience. Bi-Direction Lossless Bluetooth Connectivity With the unbreakable Bluetooth 4.0 connectivity and apt-X, Hidizs’ AP80 can still provide a “CD-like” audio quality over Bluetooth. HiBy Link Control AP80’s music wireless directly from your phone with the HiBy Link to ensure High-Res bit-perfect fidelity that is unattainable by Bluetooth. Other Functions FM Function Step Counter Small Size Yet Powerful Sound Samsung 2.45’’ Full-Size Touchscreen New Wheel Design 15 hours playtime Bi-Directional USB Connectivity Supports Most Hi-Res Formats Up to 1TB of Expanded Storage Clock Feature PACKAGE CONTENTS: -1 x HIDIZS AP80 Player -1 x Type-C Cable -1 x Type-C to Micro USB Cable -1 x Silicone Protective Case -1 x Screen Protector -1 x User Manual ♬【Hi-Res Audio & Crystal-Clear Sound】Built in an Ess flagship ES9218P DAC chip, the lossless music player delivers an SNR of up to 126dB and THD+N down to -114dB for you to experience the subtleties of each instrument with DSD technology. Enjoy the subtlest nuances of the studio quality sound in higher than CD quality with High-Resolution Digital Audio Player. ♬【HiBy OS Full Touch Screen & New Wheel Button】Our HIDIZS AP80 MP3 Player is designed with Hiby 3.0 OS, that is worldwide recognized professional music player system in software development. Samsung 2.45" full size HD touchscreen allows responsive sensitive touch, swipe control and silent operation. New wheel and 3 button asymmetrical layout for intuitive control over the device make it easy to use. ♬【LDAC Wireless Technology & Full Format Support】The new LDAC audio technology on this Hi-Res lossless music player that allows you to enjoy high quality wireless audio via Bluetooth. LDAC can transmit 3x the data to enhance wireless listening for all audiophiles. Bi-Directional lossless wireless Bluetooth 4.1 with full format support——DSD/aptX/LDAC/HWA/SBC/FLAC/APE/WMA/WAV/SACD-ISO etc. ♬【Expandable Storage Capacity & BI-Diretional USB DAC】AP80 Hi-Fi digital audio player doesn’t built-in memory SD card, but it supports up to 1TB expandable storage with micro SD cards (For about 20,000 songs). With high capacity battery, enjoy up to 9-12 hours playtime and over 35 days on standby. The bi-directional USB DAC interface for your smartphone or any other device. ♬【Portable MP3 Player & Multi-Functional】Our HiFi Music Player is ultraportable, light and compact, which is perfect companion for your sports, running and traveling. You can bring Hi-Res lossless music everywhere you go. Not only support Bluetooth Connection, but also supports time screen-saver, one button to lock, FM Radio, Step Count. 

    iFi Audio Micro iDSD DAC and Headphone Amp - with Pre amp Variable out. There is nothing like the micro iDSD. It is literally, out of this world. It is the only DAC in the world (at any price) to play True Native Octa-DSD512/PCM768/Double DXD. Its Perfect-Match means it can be fine-tuned to any headgear from IEMs all the way through to large headphones. Its 8v/4000mW output makes it one of the most powerful headamps to drive even the most hungry of headphones with ease. iFi has forged an enviable reputation for being at the forefront of computer audio technology. The micro iDSD has just made another leap, an Octa-Leap to be precise. With its special Dual-Core Burr-Brown native DSD/PCM chipset at the heart, the micro iDSD is capable of True Native PCM768, Octa-Speed DSD512 and 2x DXD; it is simply out of this world. The micro iDSD has 3 different power modes Eco, Normal and Turbo. Capable of 4000mW, 1000mW or 250mW, the micro iDSD is able to drive the full gamut of headphone and amplifiers alike. With iEMatch there to dial to suit any IEM, the micro iDSD has redefined the headphone amplifier class. Used along with the analogue volume control, the diminutive size of the micro iDSD belies its uncanny ability to drive virtually anything and everything! SmartPower® is the micro iDSD’s onboard recharging feature for Smartdevices. Its 4800mAH battery is able to fully recharge an iPhone two-times. Compatible with Apple and Android, phones and tablets, it is another example of iFi’s commitment to customer needs – enjoy high-end audio on the go without worrying about the phone going flat. iFi’s iCAN and iTube have already achieved widespread acclaim, so much so that their core features including 3D Holographic and XBass have become renowned in their own right and imitated by others. In the micro iDSD, for the first time in an iFi product, it features XBass and 3D Holographic for Headphones and Speakers. All these features are still executed in the analogue, not digital domain to preserve the original music format. And so much more….with the amazing Crowd-Design program, we are over the moon that you, the customer was central to the development of the micro iDSD. The micro iDSD is literally bursting with features – such as Direct/Pre-Amp, 3.5mm input, SPDIF Input/Output and much, much more. You will have to see it to believe it.   Specifications:     Item Description Remarks Inputs/Outputs     Inputs (rear) USB 2.0 type A “OTG” Socket (with iPurifier® technology built-in) Compatible with computers (Apple/Win/Linux), iPhone, iPod Touch, iPad and Android Devices, camera kit or USB-OTG cable required. (Full USB3.0 port compatible)   Intelligent SPDIF® Coaxial 3 Way combo SPDIF port (Coaxial In/Out; Optical In); Up to 192kHz PCM   SPDIF Optical         Outputs (rear) Audio RCA L+R     Intelligent SPDIF® Coaxial Up to 192kHz PCM       Output (right side) SmartPower® Socket Fast charge all portable devices. Compliant with USB Battery Charging Standard 1.2 – 5V @ 1.5A             Controls     Controls (front)     - HP Output Audio 6.3mm Headphone Jack   - Volume with Power On/Off switch Precision analogue volume control - 3.5mm Input   Auto disable the digital section when this is in use - X-Bass® On/Off   - 3D Holographic Sound® On/Off Auto-switching for Speakers® and Headphones® (two separate and distinct circuits)       Controls (left side)     - Power Mode Turbo, Normal, Eco Computer controlled power and gain scaling - Polarity Normal/Inverted   - Filter 3 positions, 6 filters (see filter section below)       Controls (bottom)     - Line Direct/Preamplifier Preamplifier function Enable/Disable, 0/9dB gain selectable Fixed 2V or variable with up to 5V available - iEMatch® Perfect-matching circuit for IEMs (eliminate hiss) Off / High Sensitivity Headphone / Ultra Sensitivity Headphone             DAC section     DAC Dual-core DSD, DXD, PCM DAC by Burr Brown 2-DAC Chip; 4-Channel; 8-Signals, custom interleaving for maximum SNR   Bit-Perfect DSD processing, Bit-Perfect PCM processing         Clock Ultra low jitter GMT computer controlled Femto Clock RMS jitter 12kHz – 1MHz       Audio Formats DSD 512/256/128/64 24.6/22.6/12.4/11.2/6.2/5.6/3.1/2.8 All native decoding, no internal hardware conversion   DXD 2x/1x 768/705.6/384/352.8kHz All native decoding, no internal hardware conversion   PCM 768/705.6/384/352.8/192/176.4/96/88.2/ 48/44.1kHz All native decoding, no internal hardware conversion       Filters     - PCM Bit-Perfect Processing/Minimum Phase/Standard Digital filters selectable - DSD Extreme/Extended/Standard Range Analogue filters selectable - DXD Bit-Perfect Processing Fixed analogue filter             Specifications (DAC Section)     Dynamic Range (Line) >117db(A)   THD & N (0dBFS Line)   Output Voltage (Line) >2V   Output Impedance (Zout)   Jitter (correlated) Below AP2 test set limit               Headphone Power Output     HP Amp Output Power (max) Power (continuous.) - Turbo mode 10.0V/4,000 mW @ 16 Ohm >1560 mW @ 64 Ohm - Normal mode 5.5V/1,900 mW @ 16 Ohm >950 mW @ 32 Ohm - Eco mode 2.0V/500 mW @ 8 Ohm >250 mW @ 16 Ohm             Specifications (Headamp Section)     Dynamic Range (HP) >115dB(A) (Eco Mode, 2V Out)   THD &N (HP 500mW/16R)   Output Voltage (HP) >8V (Turbo Mode)   Output Impedance (Zout)   Maximum Output Power 4,000mW @ 16 Ohm Load when using sinewave testing the iDSD micro may engage protection circuits Continuous Output Power 1,000mW @ 64 Ohm Load  

iFi Audio Micro iDSD DAC and Headphone Amp - with Pre amp Variable out. There is nothing like the micro iDSD. It is literally, out of this world. It is the only DAC in the world (at any price) to play True Native Octa-DSD512/PCM768/Double DXD. Its Perfect-Match means it can be fine-tuned to any headgear from IEMs all the way through to large headphones. Its 8v/4000mW output makes it one of the most powerful headamps to drive even the most hungry of headphones with ease. iFi has forged an enviable reputation for being at the forefront of computer audio technology. The micro iDSD has just made another leap, an Octa-Leap to be precise. With its special Dual-Core Burr-Brown native DSD/PCM chipset at the heart, the micro iDSD is capable of True Native PCM768, Octa-Speed DSD512 and 2x DXD; it is simply out of this world. The micro iDSD has 3 different power modes Eco, Normal and Turbo. Capable of 4000mW, 1000mW or 250mW, the micro iDSD is able to drive the full gamut of headphone and amplifiers alike. With iEMatch there to dial to suit any IEM, the micro iDSD has redefined the headphone amplifier class. Used along with the analogue volume control, the diminutive size of the micro iDSD belies its uncanny ability to drive virtually anything and everything! SmartPower® is the micro iDSD’s onboard recharging feature for Smartdevices. Its 4800mAH battery is able to fully recharge an iPhone two-times. Compatible with Apple and Android, phones and tablets, it is another example of iFi’s commitment to customer needs – enjoy high-end audio on the go without worrying about the phone going flat. iFi’s iCAN and iTube have already achieved widespread acclaim, so much so that their core features including 3D Holographic and XBass have become renowned in their own right and imitated by others. In the micro iDSD, for the first time in an iFi product, it features XBass and 3D Holographic for Headphones and Speakers. All these features are still executed in the analogue, not digital domain to preserve the original music format. And so much more….with the amazing Crowd-Design program, we are over the moon that you, the customer was central to the development of the micro iDSD. The micro iDSD is literally bursting with features – such as Direct/Pre-Amp, 3.5mm input, SPDIF Input/Output and much, much more. You will have to see it to believe it.   Specifications:   Item Description Remarks Inputs/Outputs   Inputs (rear)USB 2.0 type A “OTG” Socket (with iPurifier® technology built-in)Compatible with computers (Apple/Win/Linux), iPhone, iPod Touch, iPad and Android Devices, camera kit or USB-OTG cable required. (Full USB3.0 port compatible) Intelligent SPDIF® Coaxial3 Way combo SPDIF port (Coaxial In/Out; Optical In); Up to 192kHz PCM SPDIF Optical    Outputs (rear)Audio RCA L+R  Intelligent SPDIF® CoaxialUp to 192kHz PCM   Output (right side)SmartPower® SocketFast charge all portable devices. Compliant with USB Battery Charging Standard 1.2 – 5V @ 1.5A       Controls   Controls (front)  - HP OutputAudio 6.3mm Headphone Jack - Volume with Power On/Off switchPrecision analogue volume control DAC section   DACDual-core DSD, DXD, PCM DAC by Burr Brown2-DAC Chip; 4-Channel; 8-Signals, custom interleaving for maximum SNR Bit-Perfect DSD processing, Bit-Pe

About the Arcam rDock-uni: almost like new, very light use, in original box with all the accessories. A dock for audiophiles, a docking station for iPhone/Pad/Pod, that allows the highest quality and easiest fixed connection to any form of Hi-Fi, Home Cinema or Audio system. Featuring the Lightning connector for all current iDevices and USB for older ones, just Dock b'&' Play! owned music AND stream Spotify, Qobuz, RDio, Deezer, Tune-in Radio etc. Get the highest quality audio from your Apple portable with the Arcam rSeries rDock-uni. The dock's Lightning connector is compatible with the latest generation iPhone, iPad, iPad mini® and iPod touch®. When connected, the dock bypasses the digital-to-analog converter (DAC) inside your player, and feeds pure, unprocessed digital data to its own built-in high-performance DAC, which provides more accurate, musical sound. Arcam rDock-uni Lightning connector dock Compatible with Lightning connector iPhone or iPad. Exceptional audio The rDock-uni has a pair of RCA analog stereo outputs, so you can plug it into your home theater receiver or desktop speaker system and enjoy great sound. Does your system already have an outstanding DAC of its own? Then use the rDock-uni 's coaxial digital output to send the signal straight to your outboard DAC. An important part of the Arcam ecosystem The rDock-uni comes with its own remote, which lets you play, pause and skip tracks from your connected Apple portable. You can use the rDock-uni with the Arcam Solo Mini compact stereo receiver, making it even more versatile. Or couple it with the Arcam SonLink DAC for Sonos®. Both of these devices let you control the rDock-uni through their own remotes. Pass-through syncing The rDock-uni's power adapter has a USB plug, so you can either connect it to a wall outlet, or connect it to your computer via a USB port. This also lets you sync your docked player. A USB port in the dock lets you connect older 30-pin Apple portables to the rDock-uni. Just use your portable's charging cable. You'll be able to recharge your older iPod, iPhone, or iPad through the port. What must be said from the off is the rDock is a product for the mature audiophile. It assumes you already have the high end AV system and/or top notch TV (ideally) with surround sound system… and if you do you will be in dream land. Arcam has a well established tradition for producing top notch DACs and here it again lives up to its reputation. By taking the circuitry of an Apple device out the equation the rDock’s DAC is able to process the files without interference. Attach it to a good HiFi with some quality speakers and the DAC adds noticeable richness, drive and detail compared to the bog standard delivery from the iPod/iPhone/iPad alone. Most impressive is the boost to the midrange and bass which bring markedly improved depth and with it a keenly felt layer of emotional involvement. Use the digital SPDIF output and you’re of course reliant on whatever DAC you use further down the line in your AV setup, but it’s a useful addition for if you want to feed your device’s audio to multiple rooms, for instance. Arcam MD Charlie Brennan told StereoNET “Amidst all the fuss about wireless connectivity (including ours:-) the simplest and best solutions can often be ignored. The rDock is the best way to get killer sound from an iPhone/Pod/Pad”. You can safely assume Arcam’s nicely priced rDock-uni will sound terrific. What else would you expect from this UK pedigree brand which has notched up more awards for its ranges of discrete audio-video gear than just about any of its rivals? In perfect working condition and looks. Could consider posting it internationally but please, ask for a quote as the postage differs from country to country and the amount in the description is for European Union only, thanks. Product highlights: stylish and robust cast aluminium case, provides stable support for Pads/Phones and Pods compatible with Lightning connector iPhone, iPad, i En savoir plus Collaboration commerciale.

Atomos S2H Specs Inputs1x 3G/HD/SD-SDI (supports embedded audio)Outputs1x HDMI (supports embedded audio) 1x 3G/HD/SD-SDI loop output (supports embedded audio)Firmware UpdatesVia USB portSupported Formats1080i60, 1080i59.94, 1080i50, 1080p30, 1080p25, 1080p24, 1080p23.98, 1080p30 (60i), 1080p25 (50i), 1080p24 (60i), 1080p23.98 (60i), 720p60, 720p59.94, 720p50, 480i, 576iProcessingPulldown Removal: 25PsF (50i) to 25p 30PsF (60i) to 30p 24p (as 3:2-60i) to 24p Pulldown Insertion: 25p to 25PsF (50i) 30p to 30PsF (60i) 24p to 24p (as 3:2-60i)Battery LifeInternal battery: up to 2 hours Included 7.4 V 2600 mAh battery: up to 12 hours Optional 7.4 V 5200 mAh battery: up to 22 hours Optional 7.4 V 7800 mAh battery: up to 32 hours Key Features - Converts SDI Input to HDMI Output - SDI Loop Output - Supports Resolutions Up to 1080i60/50 - 1-Hour Internal Battery - 10-Hour External Battery Included - Stackable with Additional Units - Performs 3:2 / 2:2 Pulldown Removal - Test Pattern Generator / Audio Test Tone - Perfect Fit with Atomos Recorders - Fits Any Device with NP-Series Plate The Atomos Connect S2H Converter with 2600mAh Battery converts an SDI input to an HDMI output and SDI loop output in resolutions up to 1080i60/50. Connect S2H is battery-powered -- it features an internal one-hour battery and comes with a 10-hour external NP-series battery. It also supports higher capacity 7.4V NP-series batteries for up to 32 hours of power. Multiple Connect S2H and Connect H2S units can be vertically stacked together and powered by one battery attached to the topmost unit. Connects are designed for a perfect fit with Atomos Recorders but can fit any device that has a NP-series battery plate. An AC power supply is included for charging the internal battery and can charge up to three Connect units simultaneously. In addition to conversions, Connect S2H also performs 3:2 / 2:2 pulldown removal and includes a test pattern generator and audio test tone. In the Box - Atomos Connect S2H Converter with 2600mAh Battery - 2600mAH Battery for Atomos Monitors/Recorders and Converters - AC Power Supply for Charging Battery

8 legendary Class A mic preamps in the same class as the Focusrite ISA and RED ranges. They don't make them like this anymore... This unit is in very good condition - see pictures: front face is pristine with no scratches, only a few usage scratches around the rack ears from installation (marks will be hidden again after mounted onto a rack). It never left the studio. The Octopre provides eight pristine discrete channels of Focusrite Class A mic preamp and compression, OctoPre PLATINUM routes directly to any digital audio workstation via eight standard analogue outputs. Each channel features a revolutionary compressor/limiter circuit, providing a warm-sounding compressor, which morphs into a brick wall limiter to avoid those critical overs, ensuring total control over all eight channels. The mic preamps featured in OctoPre PLATINUM are similar to those featured in the award winning Focusrite Top-Of-The-Range. They are a transistor-based Class A design utilising the same full-bandwidth philosophy as the legendary RED and ISA mic preamps, ensuring detail and clarity without colouration. The first two 'super channels' also feature phase reverse, as well as TRS jack inputs on the front fascia for quick and easy, DI-free instrument plug-in. Eight line level balanced (+4 dBu) analogue inputs and outputs are provided as standard via 25-pin D-type connectors. These D-type connectors may be routed to 8 XLR/TRS by means of an (optional) 8-way 25-pin D-type to 8 XLR/TRS breakout cable, available separately. In addition to the analogue outputs, the OctoPre can be fitted with digital output (OPTIONAL CARD). Detailed description from the focusrite website: The OctoPre is an eight channel Class A microphone preamplifier, featuring a classic Focusrite mic pre and a revolutionary compressor/limiter circuit on each channel. The mic pres featured in the OctoPre are similar to those featured elsewhere in the award winning Focusrite Platinum range. They are a transistor-based Class A design utilising the same full bandwidth philosophy as the legendary Focusrite Red and ISA mic pres, ensuring detail and organic clarity without obvious colouration. The revolutionary compressor/limiter circuit provides each channel with warmsounding compression, which morphs into brick wall limiting to avoid critical ‘overs’ when recording digitally. The first two channels also feature phase reverse, as well as unbalanced 1/4” jack inputs on the front fascia for quick and easy, DI-free plug-in of guitars and basses. With Class A Focusrite analogue signal processing and comprehensive A/D interface options, OctoPre is the perfect partner for a Pro Tools™ system or any other digital audio workstation, making high quality, multi-channel recording easy. Equally, it could be utilised as part of a compact multi-channel location recording solution (with a laptop or ADAT™, for example), or as an additional set of professional-quality mic pres for any analogue or digital console or hard disk recorder. The original OctoPre is a typical Class A Platinum design, (based around a 737 Rhom transistor) and it is solid state, it has extended bandwidth (up to at least 180kHz at the top end) and sounds transparent. The original OctoPre has an edge in being more forgiving if you want to slam the pre's hard (but more 2nd order harmonic distortion as a result). -The Octopre has a dynamics (compressor/limiter) control on each channel -The Octopre has 48V phantom power switches on each channel -The Octopre has line in and out connections on 25 pin D-sub connectors and 8 XLR inputs for mics Performance specifications: THD:0.001% @ 20dBu input, mic and line at 0dB gain Noise:-96 dB at unity gain through the unit Mic EIN:-128 dBu @ 6dB of gain with 150Ω termination impedance Frequency response:-1 dB at 10 Hz to 200 kHz Carefully packed with powercord. Shipping France: 27,80 € Shipping Europe: 36,30 €

French-lenses rare old optics and cameras Facebook: Som Berthiot Contax I  Version 7 with Tessar 5cm f/2.8 : Beautiful pre war German camera by Zeiss with Tessar 2.8. External = A:  Minimals signs of use, excellent condition for this pre war camera. Mecanic = B-: Shutter has issue need a service. Lens and focus system work perfeclty. Optic = A+: Perfect uncoating, no fungus, no scratches. Details: Original leather case (used) If you have any question, contact me.  Conditions: - Shipping:  We ship items very fastly and with many cautions. We provide following number. - Conditions Seller reserves the right to remove unwanted bids from those with poor or negative feedback. In an effort to be fair to all, would those bidders with less than 10 positive or no history please contact me to establish identity & sincerity. The payment should be received within 3 days.  - International Buyers - Please Note: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.  - Shipping information : Handling time is up to 1-2 days after payment is received. We ship worldwide by « La Poste » only. Tracking number will be provided. The international postage delivery time may vary from 5 to 28 working days.  Your purchase will be shipped out one business day after the payment is received.  Please be advised that if the payment is made via PayPal, we will only ship out the item to the address with the PayPal payment. Please kindly double check yout shipping adress before checkout. If your adress is a new one, please add it when checking out on system before go to PayPal!  And we do not accept liability for any claims related to the undeliverable issue of it is caused by incorrect shipping adress.  - Guarantee and returns : We guarantee each item we sell on to be exactly as described.  If an item(s) has arrived not as described in the listing, faulty, damaged or wrong one please contact me (before leaving neutral or negative feedback) and I promise the matter will be resolved. The customer is entitled to return the product for a refund if we are notified about the return within 14 calendar days after receipt of the product. He / she will be refunded the price of the product. Return shipping costs will not be refunded, unless agreed upon. It is required that products be shipped via an insured shipping method. All products must be returned in original condition including packaging, documentation, accessories and all other items included in the sale. Returns that do not include all the peripherals will be charged on a per item basis. Please allow up to 5 working days from receipt of the item for the processing of the refund, though in most cases the refund is completed earlier than the given period. Second-hand items are not covered by any warranty. Please test your item once you receive it and let us know immediately if there are any problems/concerns with the item purchased. We strive to offer courtesy to customers and we ask you to try to solve a problem by contacting us first before leaving your comments, because the problems tend to be a simple case of miscommunication. Please email with any questions if we have forgotten something. - Feedback Comments are very important to us. We would appreciate if you leave it for us once you have received your item. It allows us to know that you have received your item and that you are satisfied with your purchase. We will also leave you a comment.

French-lenses rare old optics and cameras Facebook: Som Berthiot Nippon Kogaku Nikkor p 7.5cm f/2.8: Excellent 6x6 lens with a screw mount adapter.. External = A:  minimals signs of use Mecanic = A: Iris and focus work perfectly Optic = B+: excellent condition, very little haze Details:  If you have any question, contact me.  Conditions: - Shipping:  We ship items very fastly and with many cautions. We provide following number. - Conditions Seller reserves the right to remove unwanted bids from those with poor or negative feedback. In an effort to be fair to all, would those bidders with less than 10 positive or no history please contact me to establish identity & sincerity. The payment should be received within 3 days.  - International Buyers - Please Note: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.  - Shipping information : Handling time is up to 1-2 days after payment is received. We ship worldwide by « La Poste » only. Tracking number will be provided. The international postage delivery time may vary from 5 to 28 working days.  Your purchase will be shipped out one business day after the payment is received.  Please be advised that if the payment is made via PayPal, we will only ship out the item to the address with the PayPal payment. Please kindly double check yout shipping adress before checkout. If your adress is a new one, please add it when checking out on system before go to PayPal!  And we do not accept liability for any claims related to the undeliverable issue of it is caused by incorrect shipping adress.  - Guarantee and returns : We guarantee each item we sell on to be exactly as described.  If an item(s) has arrived not as described in the listing, faulty, damaged or wrong one please contact me (before leaving neutral or negative feedback) and I promise the matter will be resolved. The customer is entitled to return the product for a refund if we are notified about the return within 14 calendar days after receipt of the product. He / she will be refunded the price of the product. Return shipping costs will not be refunded, unless agreed upon. It is required that products be shipped via an insured shipping method. All products must be returned in original condition including packaging, documentation, accessories and all other items included in the sale. Returns that do not include all the peripherals will be charged on a per item basis. Please allow up to 5 working days from receipt of the item for the processing of the refund, though in most cases the refund is completed earlier than the given period. Second-hand items are not covered by any warranty. Please test your item once you receive it and let us know immediately if there are any problems/concerns with the item purchased. We strive to offer courtesy to customers and we ask you to try to solve a problem by contacting us first before leaving your comments, because the problems tend to be a simple case of miscommunication. Please email with any questions if we have forgotten something. - Feedback Comments are very important to us. We would appreciate if you leave it for us once you have received your item. It allows us to know that you have received your item and that you are satisfied with your purchase. We will also leave you a comment.

ANGENIEUX   f 12 - 120 mm  1: 2.2 !                         Monture ARRIFLEX "S"                                  n° 1367641                     (traduction en français ci-dessous)   3 different mounts are easily and quickly adaptable to this lens  this thanks to specific adapters:                                                   - "MFT" 4/3 for BLACKMAGIC; LUMIX..                         - "C" for BOLEX / BEAULIEU cameras or other brands                                                                            - "NEX" for SONY Alpha So you can use this lens in film and digital !!                                                 These adapters allow you to keep all the focal length settings; focus distance and diaphragm! Only one adapter will be delivered with the set Please tell me when ordering which one you are interested in I would do the assembly in my workshop at no extra cost                                                 This "vintage" optic is in very good cosmetic & mechanical condition! Close to new! it has certainly been used very little! Take a look at the photos, they speak for themselves! The glasses are clear without scratches and mold (fungus) Internal review completed! (see information note below)    Information on internal lenses: The quality of "vintage" lenses deteriorates with age. (a bit like us...) Internal micro-dust is inherent in these objectives as well as some small cleaning scratches on the front glass. Faults which are generally not affecting the result photographic On the other hand, the presence of mold (fungus) on the glasses internal are detrimental! This is the real "cancer" of mineral glasses! After a while they become embedded in the glass and it is often very difficult to extract them! They gradually spread and completely degrade optical qualities! Molds are recognizable by this: - White filaments - "foggy" aspect - Deep opaque inlays These molds appear when lenses are stored in humid and polluted environments An external examination does not always make it possible to notice them! It is necessary to do an in-depth examination! An "endoscopic" examination! the only one that allows these defects (photo 11) To do so, use a "backlight" lamp The slightest defect becomes visible! you will be surprised at result! The next time you buy a lens ask the seller if such an examination was carried out! and its result It's a safe bet that this test was not carried out! This objective that I propose to you does not present these serious faults! The focus ring rotates very well the zoom control operates at regular and fluid way thanks to a disengageable crank, the diaphragm ring performs its function no problem Made of noble and robust materials (not plastic!..) Prestige optics from the famous French brand ANGENIEUX, market leader professional optics for over 75 years! It is a material of very high quality used in the cinematographic environment for decades Currently 85% of films shot in the world are shot with lenses ANGENIEUX! http://www.mediakwest.com/tournage/item/angenieux.html Exceptional optical qualities allow this optic to compete with best sets of fixed lenses at equivalent focal lengths.. Perfect homogeneity of colorimetry, contrast and resolution.. Intended for high-end film and digital cameras.. Constant diaphragm over the entire zoom stroke (no ramping), no pumping   Exceptional brightness See also the videos made with this lens on youtube, links below: https://www.youtube.com/watch?v=4EEmW-c4WBI https://www.youtube.com/watch?v=1jB_JpjCLGo&t=229s https://www.youtube.com/watch?v=hPz5dMAo_5w https://www.youtube.com/watch?v=FXxF27ogsgY

The NiSi V5 Alpha 100mm Filter Holder is designed to allow for the convenient use of 100mm wide, 2mm thick filters. Use of this filter holder is easily accomplished by first screwing the included NiSi adapter ring for the V5 Alpha 100mm Filter Holder onto a lens with 82mm front filter threads. For lenses with front filter threads for diameters smaller than 82mm, a separately available step-up ring can be installed between the lens and the included adapter ring. After being fitted onto the adapter ring, the filter holder's pull-and-release locking pin helps to provide a reliable, yet adjustable connection that allows the holder to be rotated 360°, permitting the use of graduated neutral density and other filters that are enhanced by varied positioning. The NiSi V5 Alpha 100mm Filter Holder is preinstalled with three pairs of filter slots, a configuration that accommodates three rectangular filters. Each slot is designed to grip an installed filter only along the surface of the filter's edges. Contact with a filter's front- or rear-facing surfaces is avoided, particularly when using graduated filters whose effect can be adjusted to better suit changing lighting conditions or creative demands by sliding them up or down within a filter slot. This filter holder can be used with a separately available NiSi 82mm Adapter Ring for C4 Cinema Filter Holder Kit and V5 100mm or V5 Pro 100mm Filter Holder Kits instead of its included adapter ring. If used with that separately available adapter ring, along with either a separately available NiSi 86mm Circular Polarizer Filter for Select NiSi Filter Holder Kits or a NiSi 86mm Enhanced Circular Polarizer Filter for Select NiSi Filter Holder Kits, the NiSi V5 Alpha 100mm Filter Holder can help create a filter holder kit that offers the same essential functions as a NiSi V5 Pro 100mm Filter Holder Kit. Adapter rings for lenses with 86mm or 95mm front filter threads are also separately available. The combination of either of those adapter rings with the filter holder cannot accommodate a NiSi 86mm circular polarizer filter; however, a polarization effect can instead be obtained by placing a separately available, 100mm wide, 2mm thick polarizer filter between one pair of the filter holder's slots. Durable aluminum alloy filter holder provides three pairs of filter slots, a configuration that accommodates up to three separately available 100mm wide, 2mm thick filters Each slot is designed to grip an installed filter only along the surface of the filter's edges, avoiding contact with a filter's front- or rear-facing surfaces Use of the filter holder can be easily accomplished by first screwing the included 82mm adapter ring onto a lens with 82mm front filter threads For lenses with front filter threads for diameters smaller than 82mm, a separately available step-up ring can be installed between the lens and the included adapter ring Pull-and-release locking pin on filter holder allows for a reliable connection to the 82mm adapter ring which allows the holder to be rotated 360° Durable and lightweight aluminum alloy construction

Good day,  This is a listing for a  Fuji-Fujifilm X-H1 digital camera, in perfect fully working order, that has screen protection since day-1, and comes with many valuable extras: - 4x total Batteries, - 1x Dual charger with its cable, - 3x battery-protective-travel-case, - 1x LOWEPRO camera bag,  - 1x the original Viewfinder's Eye Cup (pictured beside the camera),  - 1x extra Viewfinder's Eye Cup/sun-hood (pictured on the camera), - 1x side-cable-protector, - 1x cleaning kit (not pictured), - 1x original receipt of purchase. Condition:  used fully working condition  and has around 10k actuations.  You'll receive: - everything seen in the photos and described above.  Please take a look on my other items.  ----------  Sale's Conditions  (please read before buying, by placing an order, means you have accepted the followings):  This item will be shipped from EU and you'll have it in your hands within a week (if you're in EU too).   If you don't know what this item is about, please ask before your purchase.  Be sure of what you're about to purchase, that you have made your research,  you have read reviews about it online, so you're sure you like its character etc....  Otherwise just do not buy from here, as I will definitely NOT accept returns  or any kind of refunds after sale is ended, as item is well described.  On the rare occasion that something will goes wrong with the item  (in case of warranty for example, if this is offered),  you'll contact me and I’ll be there for you to offer you the best and quickest solution.  Payment:   PayPal is accepted. Immediate payment is required.  Shipping:  Worldwide shipping is available.  Fully insured & signed-for shipping is provided! These options are included in shipping price!  No taxes within EU (European Union)!  Import taxes & fees (if any) are buyers responsibility. The buyer is responsible for customs fees & taxes! Shipping prices are exactly what the post office charges me with the options I have described above,  PLUS,  the new policy that now keeps fees from shipping prices too.  (Since a tracking & tracing number will be provided to the buyer,  I cannot be held responsible for any issues regarding the local or remote postal service and carrier.  However in case of an problems I'll do my best to solve any issues.  If you want to use an alternative carrier for shipping please contact me before paying so that we can inquire for shipping costs).  Please take a look at my other items.  Thank you very much for your time! .

Fast Shipping Top Quality Sent With a Tracking No. NEOS SECURITY YAESU CA-14 CHARGER SLEEVE to be used with the NC-50 YAESU CA-14 CHARGER SLEEVE to be used with the NC-50  Payment Shipping Returns Payment Shipping Returns   We accept payment by any of the following methods:   PayPal   Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class). In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.   If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.   You can return a product for up to 14 days from the date you purchased it.   Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. YAESU CA-14 CHARGER SLEEVE to be used with the NC-50 Sent With a Tracking No. Fast Shipping Top Quality NEOS SECURITY YAESU CA-14 CHARGER SLEEVE to be used with the NC-50 YAESU CA-14 CHARGER SLEEVE to be used with the NC-50  Payment   We accept payment by any of the following methods:   PayPal   Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! Shipping Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class). In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement. Returns   If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.   You can return a product for up to 14 days from the date you purchased it.   Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. YAESU CA-14 CHARGER SLEEVE to be used with the NC-50

Avizar 3.5 mm wired headphones with integrated control buttons, White DESCRIPTION 3.5 mm wired headphones. Balanced, authentic sound for an immersive listening experience. Integrated controls for easy control of calls and music. High-performance microphone for crystal-clear conversations. Universal compatibility with all devices with a 3.5 mm jack plug. Practical anti-knot design to prevent cable tangles. FEATURES: - Wired headphones specially designed for all your devices with a 3.5mm jack port - Balanced, authentic sound for an immersive listening experience - High-performance microphone for crystal-clear conversations - Integrated controls for easy call and music control PRODUCT SPECIFICATIONS Product: Earbud (In Ear) Color: White Condition: 100% New Package included: 1x Earphones 3x Pairs of ear tips (Size S/M/L) Warranty: 24 Months SHIPPING - Orders that have been placed and paid before 1:00 PM are dispatched the same day. Orders placed during the weekend or on public holidays will be processed on the next working day. - UK Orders are delivered by the Royal Mail, all international orders are delivered by the national postal service. All our shipments have their own tracking number, so you can see at anytime the location of your order. - The arrival time can take between 48 hours to 5 working days from the dispatch date. Please make sure that the adress you provided is the same as the one you registered on your profile. - All of our products are located in our warehouse in Montreuil, a beautiful city near Paris. RETURNS If you have changed your mind or if you're not satisfied with the product you received, you can send it back to us within 30 working days after the purchase. - The item must be in the original packaging and not broken or damaged. - Please note that we won't refund the cost of return postage. - For defective products, you are responsible for the cost of returning the items in the first instance. If the item is shown to be defective as described, postage costs will be refunded. - We reserve the right, after processing your claim, to refuse the refund if the item is damaged, broken or excessively used. Under such circumstances, if you're not happy with your order, or if you changed your mind, on receipt of the returned item we will assess it and the money will be refunded. If the conditions and modalities are met, and you don't wish to exchange your product, we will then refund you the amount of the item on your Paypal account. The refund will be provided within 30 days and will be processed in accordance with the original method of payment. ABOUT US Destock Access is a reference in the world of smartphone accessories. With more than 20.000 products in stock, you'll find exactly what you need for your phone. We offers a wide variety of products (screen protectors, cables, cases, headsets, etc.) for device manufacturers like Samsung, Apple, Wiko, LG, Motorola, Huawei, etc. The satisfaction of our customers is our first priority. Do not hesitate to contact us if you have any question about our products, we will be more than happy to answer. We have everything you need and so much more! Come visit us! En savoir plus Collaboration commerciale.

projection lens 35 KP 140mm F1.8 M42 mount with helicoid. État : Occasion Service de livraison : Colissimo Recommandé Version planar, 6 éléments, environ 1.6kgLes lentilles sont propres, la bague de mise au point est fluide Vendu avec le bouchon avant (95mm) et le bouchon arrière. Je peux ajouter une bague EOS/M42 sans puce si besoin à pleine ouverture c'est un peu soft mais c'est ça qui fait le charme de cette optique.J'ai "bricolé" un système qui simule un diaphragme à l'aide de diverses bagues d'adaptation ce qui permet d'avoir du F1.8, F2.8 et F4 (à F4 l'objectif est très piqué). Ce système n'est pas définitif, la première bague est simplement fixée à la patafix + du gaffer par dessus. ------------------------------------------------------------------------------------------------- Quite rare 35 KP 140mm F1.6 Planar version (6 elements) with custom high quality helicoid (made by an Ukrainian master) around 1.6kg ! Glass is clean, no fungus, maybe few dust particles and/or micro bubbles Focus is smooth I did a DIY kind of aperture system with step-down ring: with 1 ring it's equivalent to F2.8 and with all rings it's equivalent to F4, so it's very sharp ! That system can be removed without problem, the 88-86mm ring is just "glued" with patafix. I can add an EOS/M42 adapter (without chip) for free If you have any question, send a message