With individually

Mint, used less than 3 times. Comes with its original box.  Great audio machine, I did not have the chance to use it though, I had different amps at the time, did not have a chance to use it properly. A few characteristics:  Balanced and unbalanced inputs and outputs with XLR and RCA (gold-plated contacts) Configurable line outputs, fixed / variable: pre / post thomann fader Optional digital inputs can be retrofitted 96 or 192 kHz 3 individually selectable inputs on the front Pre-gain: input gain in five steps Separate signal paths ALPS RK27 high-grade volume and balance controls High-quality op-amps in the signal path Discrete-design power amp with 8 transistors per channel 2 silver-plated Neutrik headphone connectors Relay-based headphone output cut-off with thomann delayed switch-on Output management via buttons on the front panel: active line outputs, active headphone outputs, both active, both off (mute) Toroidal transformers: 25 W Large filtering capacitors in the power supply: 18,000 uF Ground lift switchable Thick-walled housing with Nextel coating Solid, laser-engraved aluminium front panel Various options available Colour on the front: black Device thomann feet: silver

Seconde main, aucune marque de rackage (voir photos pour les légères traces au-dessous), fonctionne parfaitement sous Mojave mais double emploi et pas le temps de m’en servir donc je m’en sépare à regret. Livrée en boîte avec le CD d’installation, le cable d’origine (Firewire 400), un cable FW400 vers FW800 sera joint en complément. Les drivers sont toujours disponibles sur le site d’Echo même s’ils ont cessé leur production. Frais de port: 13€75 (ou 8€15 Mondial Relay) _______________________________________________________ Second hand, no racking marks (see photos for slight traces below), works perfectly under Mojave (but the latest drivers don’t allow to work in 192khz anymore, PC or MAC). No time to use it so I reluctantly part with it. Delivered in its original box with installation CD, original cable (Firewire 400), an FW400 to FW800 cable will be included in addition. Drivers are still available for their discontinued audio products on the Echo site. Shipping EU: 22€45 ________________________________________________________     •    Sample rates: 44.1, 48, 88, 96, 176 and 192 kHz from internal clock; external clock range 32kHz to 192kHz.     •    Analogue inputs: 12 quarter-inch TRS balanced/unbalanced jack sockets with individually switchable +4dBu/-10dBV sensitivity and 10kΩ impedance.     •    Analogue outputs: 12 balanced/unbalanced TRS quarter-inch jacks with individually switchable +4dBu/-10dBV output level.     •    Digital I/O: word clock and MIDI in and out.     •    Dynamic range: input 113dBA, output 114dBA.     •    Frequency response: 20Hz to 20kHz ±0.1dB.     •    THD + Noise: <0.002 percent.

Good day,  For sale here,  a AAW NULL-AUDIO Tiburon  UP-OCC Cryo Copper cable,  from their Symphonym collection,  with 2-pin/0,78 connectors,   and 2.5mm TRRS Balanced straight-jack-plug,  for IEM in-ear-monitor earphone headphones.  (only the cable, no IEM comes with it).  This is an Audiophile's cable for High Quality Refined and detailed sound.   Description:  The Tiburon UP-OCC Cryo Copper Headphone/IEM Cable utilizes the specially made  Ultra-Pure Ohno Continuous Casting, with amazing fine strands of copper conductors.  It minimizes cross interference and it is capsulated with ultra-flexible and glossy clear jacket.  The wiring underwent cryogenic treatment to further reduce residual stress, resistance and enhance music signal transmission. The Tiburon employs a staggered wiring layout with individually enamelled asymmetrical regular and denser strands.  Such construction coupled with premier 10% silver solder delivers a full-bodied sound with distinctive layer separation. Specifications:  - Length: 1.2 meter or 48 inches (length customization available) - Pin contact: 99.9% gold hard plating over brass, insulated in clear thermal plastics - Hardware: Symphonym TM Quest Rhodium plated Copper Series - Hardware Sleeve: Carbon Fibre Soldering: 10% Silver Solder Official Retail Price: €169 Condition:  Like new, as it comes from a just purchased AAW IEM. You'll receive:  - 1x Tiburon UP-OCC Cryo Copper cable.  (just the cable, no IEMs or anything else) If you don't know what this lens is about, please ask before your purchase. All sales are final.  Please check my other sales.  Thanks for your time!  ----------  Sale's Conditions  (please read before buying, by placing an order, means you have accepted the followings):  This item will be shipped from EU.  On the rare occasion that something will goes wrong with the item  (in case of warranty for example, if/when this is offered),  you'll contact me and I’ll be there for you to offer you the best and quickest solution.   If you don't know what this item is about, please ask before your purchase.  Be sure of what you're about to purchase, that you have made your research,  you have read reviews about it online, so you're sure you like its character etc....  Otherwise just do not buy from here, as I will definitely NOT accept returns  or any kind of refunds after sale is ended, as item is well described.  Payment:   PayPal is accepted. Immediate payment is required.  Shipping:  Worldwide shipping is available.  Fully insured & signed-for shipping is provided! These options are included in shipping price!  No taxes within EU (European Union)!  Import taxes & fees (if any) are buyers responsibility. The buyer is responsible for customs fees & taxes! Shipping prices are exactly what the post office charges with the options I have described above,  PLUS,  the new policy that now keeps fees from shipping prices too.  (Since a tracking & tracing number will be provided to the buyer,  I cannot be held responsible for any issues regarding the local or remote postal service and carrier.  However in case of an problems I'll do my best to solve any issues.  If you want to use an alternative carrier for shipping please contact me before paying so that we can inquire for shipping costs).  Please take a look at my other items.  Thank you very much for your time! 

For sale Sennheiser IE 400 PRO (clear) in-ear monitors, new unopened box (warranty replacement). IE 400 PRO The warm in-ear monitoring sound of the IE 400 PRO with its rich, noticeable punch is the right choice for professionals who wish to take their accustomed studio sound onto the stage with them. Even at high sound pressure levels, the IE 400 PRO reproduces its warm sound free from artifacts and distortion. With the newly developed TrueResponse technology, the dynamic driver measuring a mere 7mm generates tremendous resolution and prevents acoustic stress, even during long periods of use. Distortion, overlapping frequencies and resonance peaks which otherwise usually occur frequently are no longer a problem. The distortion factor has been optimized to a previously unimaginable 0.08%. It’s miniature design also permits an ultra-compact construction which, thanks to the accompanying silicone and memory foam adapters, can be individually adjusted. This in-ear monitor is easy to handle and provides brilliant sound reproduction. Built to last under extreme stress, a secure and comfortable fit for hours. Looking for distortion-free, natural sound with a “punch,” transparent mid-range reproduction and clear high frequencies? The IE 400 PRO is the right choice. Newly developed dynamic 7mm wideband transducer for punchy, high-resolution monitoring sound Noticeable punch with transparent mid-range reproduction and clear high frequencies TrueResponse driver system reduces acoustic stress factors through homogeneous and distortion-free reproduction High level of wearing comfort and good fit thanks to ergonomic compact housing Excellent shielding through optimized earpiece shape and flexible silicone and foam tips Cable concept fit for the stage with innovative duct (patent application in progress) More punch, more transparency, more control The IE 400 PRO provides noticeable punch, clear high frequencies and transparent mid-range reproduction. Thanks to its clear frequency response and warm monitoring sound, musicians can perceive themselves with confidence and without distortion. Furthermore, they can do so at high sound pressure levels where other in-ear systems begin to clip and distort. The dynamics of the IE 400 PRO represent the philosophy of the entire IE series; MoreMe. Perceive more, have more control, and confidently locate your own sound in the mix. Next-generation dynamic drivers The result of intensive development work: a single dynamic high-performance driver – with a diaphragm measuring only 7mm in diameter – covers the entire frequency spectrum. This way, interference effects in the region of the transitional frequencies and phase differences are avoided. A system of magnets with triple-duct ventilation significantly reduces the distortion factor. The two-chamber absorber in the direction of the ear canal minimizes resonance peaks that would otherwise naturally occur. The result: even at high sound pressure levels, the sound remains clean and free from distortion. Consequently, the IE 400 PRO protects your hearing, even after hours on the loudest stages. During professional use, that which previously got lost in the mix suddenly becomes audible. It’s not just the sound that fits your ear… …the IE 400 PRO also sits comfortably and securely in your ear for several hours. Choose either silicone or viscoelastic memory foam tips to individually adapt to the structure and depth of your ear canal for hours of reliable wearing comfort. Durable and innovative cable ducting with a deep-set connector and double-backed protection allows the IE 400 PRO to also withstand tough nights on the stage. Again, and again.

TWS casque sans fil Bluetooth écouteurs écouteurs pods intra-auriculaires SC Specification: 1.  Colour: Black 2.  Material: ABS, lithium battery 3.  Shell size 8*5*3cm (Due to manual measurement, there will be an error of 1-3cm.)   Feature: 1.Open the shell and connect the wireless bluetooth headset The A1 Plus wireless headset Bluetooth is designed to automatically restore the connection with the last paired device when the phone case is opened, without having to take out two earplugs. The easiest way to restore the connection is to close/open the case. And our A1 Bluetooth headset is not divided into primary and secondary earbuds, both of which are primary earbuds. The connection of our A1 is very fast and convenient. 2.The HD stereo you want to hear There is a 6mm driver inside the wireless sports Bluetooth headset, which can deliver clear sound. Bluetooth 5.0 provides a faster and more stable wireless connection for your device. The chip can also drive voice-enabled assistant access and provide ultra-low game latency. Therefore, whether you are playing games, listening to music or enjoying podcasts, you will experience higher quality sound. This is a good gift for men. 3.IPX7 waterproof protection Both the headset wireless and portable charging boxes are sealed with IPX7 protection level to prevent heavy rain and water splashing. This resistance ensures that the earbuds and charging case can withstand strong jets for at least three minutes. IPX7 waterproof can provide anti-sweat protection for the headset, and has a rain and sweat-proof microphone. So that you can exercise in the gym or enjoy your favorite sports through sports Bluetooth headsets. 4.Random use of single earplugs Unlike other TWS Bluetooth headsets that work in master/slave mode, headsets with microphones allow each earbud to work individually. Just choose one at random and use it immediately, whether it's on the left or right. It can be an ideal choice for her birthday gift. 5.Easy touch Gently touch the earplugs to control all functions without discomfort. Playing, pausing, skipping songs, answering calls and volume control are all done by its smart touch sensor. 6.The smallest wireless headset The single earplug weighing only 4.4 grams is as light as A4 paper. No matter how long you listen to it, it can bring you a more comfortable wearing experience without burdening your ears. Choose from one of the two most suitable earplugs and insert the correct earplug into the corresponding ear. 7.The earplugs are marked with L (left ear) or R (right ear) because the angle of each earplug has been carefully designed to perfectly fit your ear shape.  After inserting the earbuds into your ears, gently rotate and rotate clockwise to ensure a fit, please adjust as needed.   Package Including: ·  Headphone*2 (bring a pair of earplugs) ·  Charging box*1 ·  Earplugs*3 pairs ·  usb charging cable*1 ·  Manual *1   Le 21-nov.-20 à 11:21:13 Paris, le vendeur a ajouté les informations suivantes: Payment Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. Shipping Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Terms of Sale Si vous n'êtes pas satisfait de votre achat, contactez-nous sans hésiter. Les articles peuvent être retournés dans 30 jours en état inutilisé, nous effectuerons un échange et un remboursement une fois que nous aurons reçu l'objet. Gardez les étiquettes entières et les éléments propres sans saveur, si non nous n'accepterons pas le retour. About US Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Specification: 1.  Colour: Black 2.  Material: ABS, lithium battery 3.  Shell size 8*5*3cm (Due to manual measurement, there will be an error of 1-3cm.)   Feature: 1.Open the shell and connect the wireless bluetooth headset The A1 Plus wireless headset Bluetooth is designed to automatically restore the connection with the last paired device when the phone case is opened, without having to take out two earplugs. The easiest way to restore the connection is to close/open the case. And our A1 Bluetooth headset is not divided into primary and secondary earbuds, both of which are primary earbuds. The connection of our A1 is very fast and convenient. 2.The HD stereo you want to hear There is a 6mm driver inside the wireless sports Bluetooth headset, which can deliver clear sound. Bluetooth 5.0 provides a faster and more stable wireless connection for your device. The chip can also drive voice-enabled assistant access and provide ultra-low game latency. Therefore, whether you are playing games, listening to music or enjoying podcasts, you will experience higher quality sound. This is a good gift for men. 3.IPX7 waterproof protection Both the headset wireless and portable charging boxes are sealed with IPX7 protection level to prevent heavy rain and water splashing. This resistance ensures that the earbuds and charging case can withstand strong jets for at least three minutes. IPX7 waterproof can provide anti-sweat protection for the headset, and has a rain and sweat-proof microphone. So that you can exercise in the gym or enjoy your favorite sports through sports Bluetooth headsets. 4.Random use of single earplugs Unlike other TWS Bluetooth headsets that work in master/slave mode, headsets with microphones allow each earbud to work individually. Just choose one at random and use it immediately, whether it's on the left or right. It can be an ideal choice for her birthday gift. 5.Easy touch Gently touch the earplugs to control all functions without discomfort. Playing, pausing, skipping songs, answering calls and volume control are all done by its smart touch sensor. 6.The smallest wireless headset The single earplug weighing only 4.4 grams is as light as A4 paper. No matter how long you listen to it, it can bring you a more comfortable wearing experience without burdening your ears. Choose from one of the two most suitable earplugs and insert the correct earplug into the corresponding ear. 7.The earplugs are marked with L (left ear) or R (right ear) because the angle of each earplug has been carefully designed to perfectly fit your ear shape.  After inserting the earbuds into your ears, gently rotate and rotate clockwise to ensure a fit, please adjust as needed.   Package Including: ·  Headphone*2 (bring a pair of earplugs) ·  Charging box*1 ·  Earplugs*3 pairs ·  usb charging cable*1 ·  Manual *1   Le 21-nov.-20 à 11:21:13 Paris, le vendeur a ajouté les informations suivantes: PAYMENT Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. SHIPPING Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Terms of Sale Si vous n'êtes pas satisfait de votre achat, contactez-nous sans hésiter. Les articles peuvent être retournés dans 30 jours en état inutilisé, nous effectuerons un échange et un remboursement une fois que nous aurons reçu l'objet. Gardez les étiquettes entières et les éléments propres sans saveur, si non nous n'accepterons pas le retour. ABOUT US Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Le 02-déc.-20 à 09:42:20 Paris, le vendeur a ajouté les informations suivantes:

iZotope RX 7 Audio Editor Advanced VST Overview: iZotope RX 7 Audio Editor Advanced VST is a very powerful as well as easy to use application which will enable you to eliminate the recording and encoding errors which can steal away the quality from your audio tracks. It can improve the sound quality and audio issues like noise distortions and the faulty recordings. This application offers professional tools for repairing the audio tracks and streams from the media files. iZotope RX 7 Audio Editor Advanced VST lets you manipulate the audio streams like the professional editor with a very high accuracy. This application also lets you apply declipping filters and declicking, remove humming, audio noise or the repair the audio specter. You can adjust the audio gain, equalizer, resampling rates, channels and the dithering. This application enables you to manipulate the sound from one or several audio tracks simultaneously. You can also copy, cut and paste the pieces from one stream onto another. This application also allows you to perform a precise pitch adjustment with the hum removing tool or the denoising option. The Denoise module lets you to view the track as noise profile, residual noise as well as curve lines which can be modified individually. All in all iZotope RX 7 Audio Editor Advanced VST is a very handy and easy to use application which will enable you to eliminate the recording and encoding errors which can steal away the quality from the audio tracks. Features of iZotope RX 7 Audio Editor Advanced VST: - A very powerful as well as easy to use application which will enable you to eliminate the recording and encoding errors which can steal away the quality from your audio tracks. - Can improve the sound quality and audio issues like noise distortions and the faulty recordings. - Offers professional tools for repairing the audio tracks and streams from the media files. - Lets you manipulate the audio streams like the professional editor with a very high accuracy. - Lets you apply declipping filters and declicking, remove humming, audio noisse or the repair the audio specter. - Can adjust the audio gain, equalizer, resampling rates, channels and the dithering. - Enables you to manipulate the sound from one or several audio tracks simultaneously. - Can also copy, cut and paste the pieces from one stream onto another. - Allows you to perform a precise pitch adjustment with the hum removing tool or the denoising option. - The Denoise module lets you to view the track as noise profile, residual noise as well as curve lines which can be modified individually. System Requirements For iZotope RX 7 Audio Editor Advanced VST: - Operating System: Windows XP/Vista/7/8/8.1/10 - Memory (RAM): 1 GB of RAM required. - Hard Disk Space: 500 MB of free space required. - Processor: Intel Pentium 4 or later.

BeoLab 6000 represents both the engineering skills as well as the design capabilities from Bang & Olufsen.  BeoLab 6000 is probably one of the most famous speakers around today being a part of the standard exhibition at the Museum of Modern Art in New York.  A great advantage with the BeoLab 6000 is the fact that it has two PowerLink connections giving the possibility to loop-through the signal to the second speaker directly.  Features: BeoLab 6000 fills the room with sound The choice is simple - you can fill your home with big black boxes, or you can make a stand with BeoLab 6000 and fill it with beautiful sound and beautiful looks. Aluminium Formed from a single piece of aluminium, BeoLab 6000 is shaped to stand out from its surroundings, but coloured to match any Bang & Olufsen audio or video setup. Active loudspeaker benefits How does B&O reduce the overall size of a loudspeaker, but improve its sound performance? It can only be done by placing the amplifiers directly into the loudspeaker cabinet. It's called 'Active Loudspeaker Technology' and is used to combine the purest of sounds with the smallest and simplest of shapes. Fits any room With a height of just 110cm and a depth of 10cm, finding space for a pair of BeoLab 6000 speakers is never going to be a problem. Its superior sound capabilities ensure that its performance will never dictate your placement options. The polished aluminium cabinet is available in a range of colours - black, blue, green, red and natural - that will match any Bang & Olufsen audio or video setup. Materials and finish The deliberate choice of material, and the final surface treatment of the products’ finish, are characteristic of Bang & Olufsen and one of their true core competences. B&O's designers know that people use several of their senses in experiencing a product. They therefore derive great pleasure from tactile experiences, whether they are touching a cold or a warm surface, or one that is smooth or textured. The span of materials used for Bang & Olufsen products is wider than that of any other company within the trade, and they are carefully selected for their high quality and their ability to fit naturally into a home environment. The finish is then refined to perfection and created to provide a tangible experience that supports the visual impression. Why build amplifiers into the loudspeakers instead of keeping them separate? Because you can reduce the size of the cabinet volume to one-third of the size of a conventional loudspeaker with the same sound capacity. The principle is called Active Loudspeakers, and what you get is a compact loudspeaker that can play at high volume without distortion or damage to its drive units. Furthermore, when amplifier, treble and bass units are paired for the same task, they can be tailored to compensate for each other's shortcomings. What you hear is music that sounds exactly like the instrument it originally came from (See active speakers) Deep bass: how to make deep bass with a shallow cabinet All loudspeakers, regardless of brand, size or construction, make sound by converting electric energy into acoustic energy. They push air in waves, which is what our ears pick up. To get high sound pressure, you need to move a lot of air. You can use a very large diameter loudspeaker membrane, which moves a very short distance. Or (as Bang & Olufsen prefer), you can make the membrane "deeper", in other words, make it move a greater distance with a smaller diameter. Imagine two balloons, one round and shaped like a ball, the other long and tubular. Both contain the same amount of air; it's simply their shapes that are different. A side benefit to the deeper membrane is that it allows a smaller cabinet, with greater freedom as far as form and function are concerned. Since no two loudspeaker units have exactly the same physical characteristics, Bang & Olufsen calibrate them individually to make certain that the sound of each and every loudspeaker leaving our factory is identical. By employing an active electronic crossover network with equalization, we're able to adjust frequencies before they're amplified. The signal from the sound source is shaped before distribution to the separate power amplifiers for bass and treble. In this way, the performance of the various components is "fine-tuned", until they produce an ideal, harmonised output, which will be the same, no matter which BeoLab loudspeaker you feast your eyes upon. The custom made driver units of a BeoLab loudspeaker feature extra-heavy membranes with longer movement, which help produce a deeper bass. Adaptive Bass Linearisation Adaptive Bass Linearisation (ABL) is a process patented by B&O and is incorporated in BeoLab loudspeakers. The idea is to use the surplus capacity in amplifiers and driver units, arising by normal listening levels, for a bass extension - a sound reproduction with more bass, than the loudspeaker otherwise would be able to produce. The function is adaptive. This means that the loudspeaker adapts to the signal it receives. Loudspeaker drivers are therefore fully exploited, without suffering mechanical or electronic abuse, and the built in amplifiers are not subjected to signals would otherwise create an overload situation. ABL  gives stunning bass reproduction considering the size of the loudspeaker in which it is incorporated, under normal listening levels. BeoLab 6000: active loudspeaker, 2 power amplifier modules, adaptive bass linearisation and aluminium cabinet.

Walimex Pro Aptaris Universal XL MK II cage system to DSLM and DSLR Caméras Excellent état, comme neuf Dans sa boite d'origine avec sa documentation - innovative cage system that makes system and DSLR cameras suitable for accessories - height adjustable and therefore suitable for all common cameras such as Panasonic GH-4, Nikon D800, Canon 5D Mark III, etc. - new and larger handle with additional 1/4 inch and 3/8 inch tapped holes - Eight new 1/4 inch tapped holes on the TopPlate for added convenience - A variety of mounting options around the rig - Height adjustable between 81mm and 133mm inside dimensions - Many expansion and combination options - Made in Germany - Made of extremely light and stable aerospace aluminum PRODUCT INFORMATION Aptaris - makes system and DSLR cameras suitable for accessories The "Made in Germany" Cage-System Aptaris makes your system or DSLR camera suitable for accessories and thus enables professional results when filming and photographing. Suitable for all common cameras The walimex Pro Aptaris Universal XL Mark II Cage opens up even more possibilities. With its additional 1/4 inch and 3/8 inch threaded holes, accessories such as microphone or film light can be attached even more flexibly. The new and larger handle ensures even more wearing comfort. It also has two 1/4 inch and four 3/6 inch tapped holes. The Universal XL Mk II is suitable for all common cameras such as the Panasonic GH-4, Nikon D800 or Canon 5D Mark III. In short, for those whose hot shoe and tripod threads lie on one axis and do not exceed or fall short of the inside dimensions of the cage. Aptaris is simply attached to the camera via the hot shoe of the camera and the camera screw (1/4 inch thread). An absolute highlight is the height adjustment of the cage, which is done with four Allen screws. This fits the version for a lot of cameras. In addition, two small hooks on the camera plate, which can be individually adjusted depending on the camera, ensure an absolutely non-slip grip. Greatest flexibility in use Thanks to a large number of 1/4 inch threads on all sides and a 3/8 inch thread on the underside, a lot of accessories such as microphones or LED lights can be attached as desired. Additional flexibility in use is provided by the adjustable, supplied handle, which can be mounted at the top, bottom or side as needed. This is also the shooting near the ground possible. With the Manfrotto PL 501 standard adapter plate, Aptaris can also be mounted on a Manfrotto tripod. In any case, access to the battery compartment, memory card etc. remains unrestricted. Many expansion and combination options Aptaris is a system. That's why you can extend the cage with any number of accessories such as the Aptaris rod module or the shoulder rest module. The Rod Module gives you plenty of room to attach additional accessories such as a Follow Focus and a Mattebox. With a diameter of 15mm, the rods comply with the industry standard, so that the combination with all common accessories is possible. Thanks to the included Rodmodulplatte the rod module can easily be attached via a sliding mechanism on the Aptaris system. With the Aptaris shoulder rest module, you can cast a complete rig out of the cage with just a few simple steps - for even more flexibility, especially in mobile use. Of course, you can also extend Aptaris at any time eg with additional hot shoe adapters or a separate L-bracket. Livraison rapide et soignée

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8businessday Add to my favorite sellers Mon. to Sat. Customer Service Warranty Service Product Description Description: Features Made of Aluminum with High Quality Completely manual control, manual focus and manual exposure Without glass Not Focus to Infinity No electrical connection There is no ROM connection on the ring so diaphragm control of the lens is set manually Equipped with lock & stop pi Suitable for Cameras and Camcorders: For Canon EoS EF Mount cameras(such as for Canon EoS 600D/60D/1100D....etc) Suitable for Lens: For Canon FD Mount Lenses Included: 1x FD-EOS Mount Adapter pictures - - - - - - - payment 1. We accept PayPal only. 2. All major credit cards are accepted through secure payment processor PayPal. 3. Payment must be received within 7 business days of auction closing. 4. If you have bought multiple items from me, you can send me one payment for all the items instead of paying for them individually. When you click the Pay Now button, will automatically determine if there are other items you have won or purchased from me and will combine them for your review. 5. NOTE: Import duties, taxes and chargers are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding buying. Warranty 1. 12 months Warranty. Buy with confidence! 2. If you are not satisfied when you receive your item, please return it within 14 days for a replacement or money back. Please contact me before you return it. 3. If item is defective in 3 months, We will send you a replacement without extra charger, or offer refund after we receive the defective item. 4. If item is defective after 3 months, you can still send it back to us. We will send you a new one after receiving the defective item. But you have to pay the extra shipping fee. policies 1. We are not responsible for any custom duty or import tax. 2. We will leave POSITIVE FEEDBACK after receiving the payment. Please contact us if you are not satisfied with the item after receive it. 3. All messages will be answered within 1 business day. If you do not receive our reply, please kindly re-sent your message and we will reply to you as soon as possible. 4. Serious Buyer Only! Please place bid only if you agree with all the terms. 5. If you have any problems or concerns whatever with your order or products, please message us and give us a chance to assist you before you leave any feedback. We believe we can produce a positive outcome to any situation and will work hard to earn your praise. If you were pleased with this transaction, Please give us 5 star rating, thanks! Shipping 1. We Ship to Worldwide. 2. Items will be shipped within 2 business day on payment received. 3. Item are shipped from shenzhen using Airmail, reach most of the countries within 10 to 20. 4. Delivery time depends on destination and other factors, it may takes up to 20 business days. Contact Us 1. Our office hours are 9:00 a.m to 6:00 p.m (GMT +8) of Monday to Saturday. And our Office is closed on Sunday and public holidays. We apologize for the late reply during

ARRI FOLLOW FOCUS HF WCU-4  Perfect condition - All update to last firmware  Work for RED (all cam), ARRI (all cam) - 3 X CLM4 MOTOR  - 2 X LDE-1 MOTOR for created table lens - 4 X CLM4 CABLES  - 1 X KIT L-CUBE + LBUS Cables - 1 X ARRI Plate with V-Lock plate  - All accessory from ARRI original part are include - SET Magic arms for fix the V-Lock plate to the WCU-4 - SET FULL RING WCU-4 WHITE, METRIC, FEET - WCU-4 UNIT (Last Firmware)  - UMC-4 UNIT (With all cable include) - UDM DISTANCE (With all cable include) - ZMU-3 (With all cables and fixation for fluide head)  - 2 SET of Long cable for ZMU-3 - 3X Batteries Sony and chargeur (All cables include)  - SET of Gears for CLM4  - TC Cables and all cable are include inside the KIT - Special cable for Cooke S4/i - Special cable for update L-CUBE or C-force Motor Delivered with 1 WCU-4 ARRI Flight case and 1 small flight case  No V-Lock Batterie are include - Only Sony Batterie are include ---------- Payment We accept payment via PayPal only. If you purchased multiple items from us, you can send payment to us for all the items instead of paying for them individually. When you click the Pay Now button, will automatically determine if there are any other items that you have won or purchased from me and will combine them for your review. Shipping Maybe we can ship your item sooner than that, but message us first. Returns If your order has been received and it is not what you ordered, or if your item has a manufacturing defect, please contact us within 15 working days of receipt of the goods. We will be responsible for all loss. Please send the items back to us and we will send you a replacement or 100% refund your money. Feedback Your satisfaction and positive feedback is very important to us. Please leave positive feedback and 5 stars if you are satisfied with our items and service. If you have any problems with our items or services, please feel free to contact us first before you leave negative feedback. We will try our best to solve any problem and provide you with the best customer services.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8businessday Add to my favorite sellers Mon. to Sat. Customer Service Warranty Service Product Description Description: Specification: 1.Height: Approx.60mm 2.Material: Plastic 3.Hood Color: Black 4.Suitable for: Canon EF-S 55-250mm f/4-5.6 IS STM Features: 1.Prevent glare by stopping light from coming into the lens at side angles 2.Improves contrast and image quality 3.Protects lens from scratches and impacts 4.You can use lens cap and filter with the hood on a lens 5.Can be installed in reverse position to save space when not needed. Included: 1 X Lens Hood pictures - - - - - - - payment 1. We accept PayPal only. 2. All major credit cards are accepted through secure payment processor PayPal. 3. Payment must be received within 7 business days of auction closing. 4. If you have bought multiple items from me, you can send me one payment for all the items instead of paying for them individually. When you click the Pay Now button, will automatically determine if there are other items you have won or purchased from me and will combine them for your review. 5. NOTE: Import duties, taxes and chargers are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding buying. Warranty 1. 12 months Warranty. Buy with confidence! 2. If you are not satisfied when you receive your item, please return it within 14 days for a replacement or money back. Please contact me before you return it. 3. If item is defective in 3 months, We will send you a replacement without extra charger, or offer refund after we receive the defective item. 4. If item is defective after 3 months, you can still send it back to us. We will send you a new one after receiving the defective item. But you have to pay the extra shipping fee. policies 1. We are not responsible for any custom duty or import tax. 2. We will leave POSITIVE FEEDBACK after receiving the payment. Please contact us if you are not satisfied with the item after receive it. 3. All messages will be answered within 1 business day. If you do not receive our reply, please kindly re-sent your message and we will reply to you as soon as possible. 4. Serious Buyer Only! Please place bid only if you agree with all the terms. 5. If you have any problems or concerns whatever with your order or products, please message us and give us a chance to assist you before you leave any feedback. We believe we can produce a positive outcome to any situation and will work hard to earn your praise. If you were pleased with this transaction, Please give us 5 star rating, thanks! Shipping 1. We Ship to Worldwide. 2. Items will be shipped within 2 business day on payment received. 3. Item are shipped from shenzhen using Airmail, reach most of the countries within 10 to 20. 4. Delivery time depends on destination and other factors, it may takes up to 20 business days. Contact Us 1. Our office hours are 9:00 a.m to 6:00 p.m (GMT +8) of Monday to Saturday. And our Office is closed on Sunday and public holidays. We apologize for the late reply during the holidays.

Yamaha Matrix Processeur MTX5-D - Matrice Processeur - Excellent état Série MTX - Caractéristiques techniques - Processeurs - Audio professionnel - Produits - Yamaha - France MTX5-D (yamaha.com)   MTX5-D Mixing capability Mixing channels Mixing Channel: 16 Mono + 3 Stereo + 2 Effect Return + 8 Direct-in to Matrix Input channel functions Mono CH: 3-band PEQ, Comp, Gate, Auto Gain Control, Feedback suppressor (available in ch 1-8) Output channel functions Room Delay, Room EQ, Speaker Processor, X-Over (1way,2way), Delay, 6-band PEQ, Limiter I/O Phantom power +48V Internal processing Priority Ducking, Ambient Noise Compensator Sampling frequency rate Internal 48kHz/ 44.1kHz Signal delay Less than 3.0ms (AD-DA @48kHz) Total harmonic distortion Less than 0.05% (+4dBu, Gain:-6dB), Less than 0.1% (+4dBu, Gain:+66dB) Frequency response 20Hz to 20kHz, +0.5dB, -1.5dB Dynamic range 107dB (Gain:-6dB) Hum & noise level Equivalent input noise -60dBu (Gain ： +66dB), -83dBu (Gain ： -6dB) Crosstalk -100dB Heat dissipation 55.9kcal/h max Power requirements AC100V-240V 50Hz/60Hz Power consumption 65W Dimensions W 480mm (18.9") H 88mm (3.4") D 351mm (13.9") Net weight 6.3kg (13.9lbs) Others Memory bank: PRESET 50 ·          * Total harmonic distortion is measured with a 18dB/Oct fi lter @80kHz. ·          * Hum & noise level is measured with a 6dB/oct fi lter @12.7kHz;equivalent to 20kHz fi lter with infi nite dB/Oct attenuation. AnalogInput Specifications Input terminal GAIN Actual load impedance For use with nominal Input Level Connector Nominal Max. before clip INPUT 1-8 +66dB 10kΩ 50-600Ω Mics & 600Ω Lines -62dBu -42dBu Euroblock -6dB +10dBu +30dBu ST IN 1,2 - 10kΩ 600Ω Lines -10dBV +10dBV RCA Pin Jack AnalogOutput Specifications Output terminal Actual Source impedance For use with nominal Output Level Connector Nominal Max. before clip OUTPUT 1-8 75Ω 10kΩ Lines +4dBu +24dBu Euroblock DigitalInput and Output Specifications Terminal Format Level IN/OUT Connector Note YDIF In YDIF RS-422 16IN RJ45 YDIF Out YDIF RS-422 16OUT RJ45 Primary Dante 1000BASE-T 16IN/16OUT RJ45 MTX5-D Only Secondary Dante 1000BASE-T 16IN/16OUT RJ45 MTX5-D Only ControlI/O Specifications Terminal Level Connector MTX5-D GPI 16 IN / 8 OUT IN 1-15ch: 0-5V 16ch: 2.5-24V: High, 2.5V or less, Allowable input +24V Euroblock OUT Open Collector +V DC5V MTX5-D REMOTE RS-232C (BAUD RATE: 38.4kbps or 115.2kbps) D-sub 9pin (Male) DCP - RJ-45 Exi8/Exo8 Specifications   EXi8 EXo8 Sampling frequency 48kHz/44.1kH Signal delay Less than 2.5ms Total harmonic distortion Less than 0.05% (+4dBu, Gain:-6dB); less than 0.1% (+4dBu, Gain:+66dB) Frequency response 20Hz to 20kHz, -1.5dB min, 0dB typ., +0.5dB max Dynamic range 107dB (Gain:-6dB) Equivalent input noise (EIN) -126dBu (Gain: +66dB) Phantom power +48V (per channel; individually settable) Crosstalk -100dB (@1kHz) Heat dissipation (per hour) 21.5 kcal max. Power supply voltage 100V 50/60Hz Power consumption 25 W max. Dimensions (W x H x D) 480(W) x 44(H) x 351(D)mm, 1U 480(W) x 44(H) x 351(D)mm, 1U Included items Power cord, Euroblock plugs (3-pin, tabbed) x8 EXi8Analog Input Specifications Input terminal GAIN Actual load impedance For use with nominal Input Level Connector Nominal Max. before clip INPUT 1-8 +66dB 10kΩ 50-600Ω Mics & 600Ω Lines -62dBu -42dBu Euroblock -6dB +10dBu +30dBu EXi8Digital Input Specifications Terminal Format Level IN/OUT Connector YDIF In YDIF RS-422 16IN RJ45 EXo8Analog Output Specifications Output terminal Actual Source impedance For use with nominal Output Level Connector Nominal Max. before clip OUTPUT 1-8 75Ω 10kΩ Lines +4dBu +24dBu Euroblock EXo8Digital Output Specifications Terminal Format Level IN/OUT Connector YDIF Out YDIF RS-422 16OUT RJ45 Exi8 /Exo8 Control I/O Specifications Terminal Format Level Connector Network Ethernet 100Base-TX - RJ-45  

2 Enceintes Bibliothèques Bang and Olufsen Beovox S45-2 (B&O) T6312 Speakers Youtube demo link: https://www.youtube.com/watch?v=sGseuFLROKU - B&O's best balanced Uni-phase speaker ever made - Here for the first time in 4 years in the super rare, special-order oak finish. Both the white and oak finishes had to be ordered individually and were sent directly from Denmark with a 10-week lead time, making them even more sought after. - This pair have spent their life on wall brackets so are immaculate cosmetically and have benefited from a recent special oak wax treatment. - Regularly recommended on Beoworld - Superior sonically to the often sought out S75 in terms of range. - Genuine B&O wall mounts and aluminium stands both available for purchase separately to place them out of the way or make an elegant feature in the room. See my other listings. - Adds hugely to the all important mid-range over the S35, S45 (2-way) and even the S50 and so better with vocals or classical music in particular - Linear phase sound reproduction design means that all of the frequencies reach your ear at the same time giving the purest reproduction of the original recording. - Sound like new (with the benefit of a run-in too, of course) With its three-way speaker system, the Beovox S45.2 replaced the original S45 in 1978 and comprised a 200mm woofer, 90mm mid-range unit as well as a 25mm tweeter. Immensely popular over the years, the S45/S45.2 range could be positioned either within a shelving system, wall-mounted or else on its own special optional floor stand (available separately, please message for details). The speaker offered a full frequency range of 38 - 20KHz and less than 1% harmonic distortion with its linear phase sound reproduction. Still relatively slim at 21cms avoiding unsightly protrusion into the room whether on the wall or shelf or on the minimalist stands. Courtesy of Beoworld Manufactured: 1978 - 1982 Designer: Jacob Jensen Colours: Rosewood, Teak An exceptional little bookshelf speaker of hi-fi quality with a frequency range of 38 - 20000 Hz and less than 1% harmonic distortion. You will find these speakers regularly recommended on BeoWorld. They have the same height and width as the lesser S35 speakers but are 3cm deeper and 1kg heavier. This small size difference makes an immense difference to the sound though. The extra filler drive unit adds hugely to the all important midrange sound and this is, to many users' ears, the best balanced bookshelf speaker made by B&O. What it lacks in ultimate bass, it repays in accuracy and tone. The optional floor stand is elegant and effective and worth hunting out. A capacitor change may be needed to make an old pair sing but you are very unlikely to be disappointed by purchasing a pair of these. For those in search of more bass, S75s are the bigger brother but lack the sonic purity found in the S45.2. To beat these in this range, you need M100s and a bigger house! Linear phase sound reproduction. Speaker units include a 20cm woofer, a special 8cm Phase Link unit, and a 2,5cm dome tweeter. Volume 25 litres; weight 7kg. BeoVox S 45-2 type: Market: Type: Intro. year: Last sold:              6312     1978          11-82 Details: Continuous load 56 W Music load 75 W Impedance 4 - 8 ohms Frequency response +4 -8 dB 38 - 20,000 Hz Sensitivity 5 W Gross volume 25 litres Woofer 20cm Phase link unit 9cm Tweeter 2,5cm Dimensions W x H x D 26 x 48 x 21cm Weight 7 kg each Livraison Internationale (cotation sur demande) (please feel free to contact me for further details) Worlwide shipment: please contact before bidding   BIEN LIRE AVANT D’ENCHERIR; READ CAREFULLY BEFORE BIDDING   Attention pour la livraison (Be careful for the delivery)   Les objest ne sont pas exemptés des vibrations ou chocs dû au transpo

Walimex pro 'mutabilis' Basic-Set 'Portable'  Excellent état Dans sa caisse en bois Quality "Made in Germany" 100 percent developed and manufactured in Germany, this system convinces with outstanding precision and workmanship, exceptional materials and well thought-out engineering skills. Due to the use of particularly light aircraft aluminium, this innovative rig system even withstands highest loads. Mutabilis – Latin for changeable The "Mutabilis" video rig system is, above all, characterized by its modular design. The base unit is the central element, which can be individually extended and adapted for any possible situation. With just a few flicks of the wrist this system can be converted from a tripod mounted unit to a very light shoulder rig. Due to the compatibility of the individual accessory parts, as well as the compliance with all applicable industrial standards, this system offers you full flexibility in use - no matter whether you work on your own, or in a team. Due to the continuous expansion of innovative accessories, this system will be your reliably companion in any possible situation for many years. The Basic-Set "Portable" If you are looking for a very light, but extremely loadable shoulder rig, the walimex pro "Mutabilis" Basic-Set "portable" is your first choice. With the angle piece for the shoulder support, which is included in the scope of delivery, you can change between a setup for Viewfinder or an external monitor with just the flick of a wrist. Due to its versatile and fully compatible accessories, the Basic-Set "portable" can be extended for various applications. The walimex pro "Mutabilis" Basic-Set "Portable" is ideal for mobile use. General information MaterialAviation aluminium, stainless steelProduct ColorBlackCage CompatibilityDSLR, CSC, Video camera, Production camerasWeight1500gHeight150mmWidth260mmLength630mmCompatible with AptarisYes Specifications Max. Capacity12kgRod diameter15mmmodular systemYes Livraison rapide et soignée

Specification: 1.  Colour: Black 2.  Material: ABS, lithium battery 3.  Shell size 8*5*3cm (Due to manual measurement, there will be an error of 1-3cm.)   Feature: 1.Open the shell and connect the wireless bluetooth headset The A1 Plus wireless headset Bluetooth is designed to automatically restore the connection with the last paired device when the phone case is opened, without having to take out two earplugs. The easiest way to restore the connection is to close/open the case. And our A1 Bluetooth headset is not divided into primary and secondary earbuds, both of which are primary earbuds. The connection of our A1 is very fast and convenient. 2.The HD stereo you want to hear There is a 6mm driver inside the wireless sports Bluetooth headset, which can deliver clear sound. Bluetooth 5.0 provides a faster and more stable wireless connection for your device. The chip can also drive voice-enabled assistant access and provide ultra-low game latency. Therefore, whether you are playing games, listening to music or enjoying podcasts, you will experience higher quality sound. This is a good gift for men. 3.IPX7 waterproof protection Both the headset wireless and portable charging boxes are sealed with IPX7 protection level to prevent heavy rain and water splashing. This resistance ensures that the earbuds and charging case can withstand strong jets for at least three minutes. IPX7 waterproof can provide anti-sweat protection for the headset, and has a rain and sweat-proof microphone. So that you can exercise in the gym or enjoy your favorite sports through sports Bluetooth headsets. 4.Random use of single earplugs Unlike other TWS Bluetooth headsets that work in master/slave mode, headsets with microphones allow each earbud to work individually. Just choose one at random and use it immediately, whether it's on the left or right. It can be an ideal choice for her birthday gift. 5.Easy touch Gently touch the earplugs to control all functions without discomfort. Playing, pausing, skipping songs, answering calls and volume control are all done by its smart touch sensor. 6.The smallest wireless headset The single earplug weighing only 4.4 grams is as light as A4 paper. No matter how long you listen to it, it can bring you a more comfortable wearing experience without burdening your ears. Choose from one of the two most suitable earplugs and insert the correct earplug into the corresponding ear. 7.The earplugs are marked with L (left ear) or R (right ear) because the angle of each earplug has been carefully designed to perfectly fit your ear shape.  After inserting the earbuds into your ears, gently rotate and rotate clockwise to ensure a fit, please adjust as needed.   Package Including: ·  Headphone*2 (bring a pair of earplugs) ·  Charging box*1 ·  Earplugs*3 pairs ·  usb charging cable*1 ·  Manual *1   Le 21-nov.-20 à 11:21:13 Paris, le vendeur a ajouté les informations suivantes:

Préamplificateur haut de gamme APT HOLMAN made in USA- RARE -BONNE ÉTAT. État : "Occasion" Service de livraison : Colissimo Recommandé préamplificateur haut de gamme APT HOLMAN. Apt Holman Preamplifier (1977-1983) Nombreuses entrées, double entrée vynile ajustables. Sortie external processor etc..la liste complète des caractéristiques techniques est en Anglais. bonne état de Fonctionnement Inputs Phono 2 Phono inputs. The first has selectable resistance and capacitance, while the second is fixed at 47kΩ and 50 pF. 100 mV maximum at 1 kHz, inverse RIAA, warp-proof. The right channel of each of the two phono inputs is internally adjustable ±2 dB for Line All line inputs are 50 kΩ in parallel with 330 pF. Unselected inputs are terminated with 2.2 kΩ. Maximum input level: 10 V RMS (+20 dBV or +22 dBm). 3 line-level inputs. 2 tape monitor loops. 1 external processor loop, for a total of six line-level and two phono inputs! Gain, Polarity and Volume Control 18 dB maximum gain from line inputs. Phono preamp gain: 36.5 dB at 1 kHz: 5 mV for 2 V output, 1.25 mV for 0.5 V output. All outputs are non-inverting. Volume control rated to track left-right to within 1 dB over the entire range. I'm impressed: this is a very important parameter, and this is the only preamp I've ever seen which bothers to specify it. The multiwiper 10 kΩ volume control has 32 clicks, or 31 intervals, at 10o per click, or room for 36 clicks in 360.o The volume control uses individually trimmed thick-film resistors to ensure precise channel-to-channel tracking. Outputs Two MAIN outputs, fed in parallel. Provisions on the circuit board to allow your technician to insert a fixed resistive pad in the path of the MAIN 2 output if this optimizes the gain structure for your power amplifier. 330 Ω source impedance, 5 kΩ/3,000 pF maximum load. Two tape outputs: 100 Ω source impedance, 10 kΩ/1,000 pF maximum load. One external processor output. One 1⁄4" headphone output from a separate amplifier. Frequency Response 20 - 20,000 Hz ±0.5 dB, with ultrasonic and ultrasonic filters active. RIAA EQ ±0.5 dB 30 - 15,000 Hz. Selectable 15 Hz Infrasonic filter (rear panel switch) Within 0.5 dB at 20 Hz, -3 dB at 15 Hz and > -30 dB at 5 Hz. Group delay 4 mS at 50 Hz. If the filter isn't selected, the -3 dB point is 8 Hz. Ultrasonic Filter (automatically engaged when Tone Controls active) Within 0.5 dB at 20 kHz, -3 dB at 40 kHz, and -18 dB at 100 kHz. Group delay 7 μS. Interchannel delay: < 0.5 μS. (the limit of audibility is 10 μS.) When the tone controls are defeated, the -3 dB point is 150 kHz. High Filter (only active with Tone Controls selected) -3 dB at 8 kHz. Distortion Less than 0.01% THD at rated output (2V) and lower. Less than 0.01 % SMPTE intermodulation distortion (60/7k Hz 4s1) at rated output (2V) and lower.

NIKON PK-11A Tube extension auto 8 mm. Cette bague permet de garder la présélection automatique de diaphragme et le couplage du posemètre. Vous travailler à la pleine ouverture et le diaphragme se ferme uniquement au moment du déclenchement. Cela permet de visualiser l’image de manière lumineuse. Le contrôle automatique de l'exposition est également possible avec cette bague. La bague PK-11A peut être utilisée individuellement ou en combinaison entre l'objectif et le boîtier de l'appareil photo. Elle s'adapte également au soufflet Nikon, en conservant les fonctions d'éclairage énumérées ci-dessus. La PK-11A conserve les fonctions de présélection de diaphragme automatique et de couplage de mesure avec les objectifs Nikkor; AI, AIS, AF, AF-D. Pas la PK-11 (Aucune mesure d'exposition n'est disponible avec les appareils photo D90, D5000, D5100, D3000 et D3100). État: Neuf. Inutilisé. Par précaution avant la vente je teste le matériel, même neuf. Le mécanisme fonctionne parfaitement; et le tube s’emboîte également parfaitement sur l’appareil photo. Évidement aucune traces ou rayure, aucun choc. Dimensions: 64,4(ø) x 17,8mm Poids: 52 g Si vous achetez chez un vendeur hors Union Européenne n’oubliez pas que vous aurez des frais: - Frais de douane - TVA 20% - Frais de dossier du transporteur ± 15 €  Livré: tube extension Nikon, copie notice. Garantie 60 jours de bon fonctionnement mécanique. (Retour et remboursement si il y à un dysfonctionnement. Sauf pour un appareil ou objectif incompatible. Tous les articles retournés doivent être à l'état NEUF) (Je vends également d’autres tubes d’extension de différentes tailles sur d’autres annonces) Si vous achetez plusieurs objets les frais de port sont groupés; réduits.(Contactez-moi pour que je les réduise) Remise en main propre possible. (Dpt 37) Si vous avez une question contactez moi. Livraison: J’expédie en France, en Union Européenne, Grande Bretagne et Suisse. J’expédie régulièrement en Grande Bretagne et en Allemagne. - Ce matériel sera expédié en envoi soigné Colissimo avec suivi postal. (France: 7 €) - Ou livraison nationale et internationale en envoi soigné par la Poste en enveloppe carton rembourrée plus double protection intérieure avec suivi postal. (France: 5,70 €) Pas de taxes et frais de douane pour les acheteurs au sein de l'UE. (S'il se produit une fois que vous n'êtes pas satisfait de votre achat, veuillez me contacter immédiatement avant l'évaluation et nous ferons de notre mieux pour prendre les mesures qui vous conviennent)                                                                                              - - - - - - - - - - In english NIKON PK-11A Extension tube 8 mm This ring keeps the automatic diaphragm preselection and the coupling of the light meter. You work at full opening and the diaphragm closes only at the time of triggering. This allows you to view the image in a bright way. Automatic exposure control is also possible with this ring. The PK-11A ring can be used individually or in combination between the lens and camera body. It also fits over the Nikon bellows, retaining the light functions listed above. The PK-11A retains the functions of automatic diaphragm preselection and measurement coupling with Nikkor lenses; AI, AIS, AF, AF-D. Not the PK-11. (No exposure measurements are available with D90, D5000, D5100, D3000 and D3100 cameras). Condition: New, unused As a precaution before the sale I test the equipment, even new. The mechanism works perfectly; and the tube attaches perfectly to the camera also. Of course no traces or scratches, no shocks. Dimensions: 64,4(ø) x 17,8mm Weight: 52 g If you buy from seller outside the European Union don't forget that you will

- - - - - - - - - - - - - - - - 8businessday Add to my favorite sellers Mon. to Sat. Customer Service Warranty Service Product Description Description: Feature: 1. Parents in the fiber optic cable should pay attention to the first plastic fiber optic connector to take off the connector, the direction of the interface, square up, circular ultra-under, aligned optical interface into it. 2. Do not insert the wrong side, easy to damage the optical interface Oh, plug anti-damaged we are not responsible. 3. Coaxial digital fiber to analog audio L R converter SPDIF digital audio decoding 4. Using imported audio processing chip 8416-CZZ. Convert coaxial or optical digital audio signals to analog L / R audio. Support sampling rate of 44.1 32., 48-96KHz playback. Input code for the 24bit S / PDIF left and right channels. 5. All connection ports are gold-plated interface materials. Provide electronic noise reduction transmission. 6. Easy to install, easy to operate. USB power cord, more environmentally friendly, stable and convenient. Specification: Input: Coaxial or optical digital audio Output: R / L (Audio Output Connector) Audio Input Connections: Toslink, 1xRCA (Coaxial) Audio Output Connection: 2xRCA (Right / Left) Support sampling rate of 44.1 32., 48-96KHz playback Passed the certification: FCC, UL, CCC, UK Power input: AC 100-240V 50 / 60Hz Power type: USB cable power supply Power: 5W (highest) Product Size: 51 x 41 x 26mm/2x1.61x1.02'' Type: A(Adapter), B(Adapter+DC Cable), C(Adapter+DC Cable+Optical Cable) Note:   Please allow 1-3mm differs due to manual measurement. Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding. Included: 1 X Analog Converter Decoder 1 X Optical Cable (Optional) 1 X USB-DC Power Cable (Optional) pictures - - - - - - - payment 1. We accept PayPal only. 2. All major credit cards are accepted through secure payment processor PayPal. 3. Payment must be received within 7 business days of auction closing. 4. If you have bought multiple items from me, you can send me one payment for all the items instead of paying for them individually. When you click the Pay Now button, will automatically determine if there are other items you have won or purchased from me and will combine them for your review. 5. NOTE: Import duties, taxes and chargers are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding buying. Warranty 1. 12 months Warranty. Buy with confidence! 2. If you are not satisfied when you receive your item, please return it within 14 days for a replacement or money back. Please contact me before you return it. 3. If item is defective in 3 months, We will send you a replacement without extra charger, or offer refund after we receive the defective item. 4. If item is defective after 3 months, you can still send it back to us. We will send you a new one after receiving the defective item. But you have to pay the extra shipping fee. policies 1. We are not responsible for any custom duty or import tax. 2. We will leave POSITIVE FEEDBACK after receiving the payment. Please contact us if you are not satisfied with the item after receive it. 3. All messages will be answered within 1 business day. If you do not receive our reply, please kindly re-sent your message and we will reply to you as soon as possible. 4. Serious Buyer Only! Please place bid only if you agree wi

High Speed HDMI Cable is designed to meet and exceed the highest standards of HDMI performance. Capable of delivering 18Gbps bandwidth, these are the only cables to be tested and certified by HDMI Authorized Test Centers to ensure they support all features in the latest HDMI specification. Guaranteed to work with all modern 4K equipment, the Certified Premium High Speed HDMI Cable is the perfect choice for all your 4K and High Speed HDMI display needs. Buy with Confidence:  you can rest assured we stand behind our products and our customers. Comprehensive Testing: Each cable length has been individually tested and certified to deliver the full 18Gbps bandwidth with a high level of EMI resistance. Dual Video Stream: This High Speed HDMI Cable supports the simultaneous delivery of dual video streams to a single display screen

body { /*padding: 20px 80px 20px 20px;*/ font-family: "Source Sans Pro", sans-serif; } h2 { margin-top: 0; }.images img { max-width: 400px; }.store_desc { min-width: 800px; text-align: center; border-top: 1px solid #333; border-bottom: 1px solid #333; background-color: #D9F0FF; margin: 40px 0 20px }.third { width: 30%; display: inline-block; padding: 10px 1.5% 10px; margin: 40px 0 40px; text-align: center; }.tt { font-size: 1.4em; padding-bottom: 10px; }.col_left { position: absolute; }.col_right { margin-left: 400px; min-height: 520px; min-width: 400px; }.images img { max-height: 520px; max-width: 380px; } Crumpler Doozie Photo DZPBP 010 Sac à dos pour appareils photo avec compartiment tablette 10" et Étui amovible rouge orange Product Details Semi-professional SLR camera (e.g. Sony Alpha 77 II, Canon EOS 1200D, Nikon D5200 etc.) with mid-size zoom lens + mid-size zoom lens + flash + accessories + 10" Tablet in a sleeve Extra space for cables, memory cards, headphones and pens in the big main compartment and the outside pocket The padded tablet compartment witch velcro closure offers optimal protection against scratches Including removable camera pouch with padded, flexible dividers for arranging the pouch individually Outer size: 39 x 45 x 16 cm; Inner size: 38 x 33,5 x 15,5 cm; Volume: 13 l; Weight: 600 g Le Doozie Photo Backpack est si polyvalent qu'il devrait être étudié par une équipe de scientifiques. Premièrement, tu peux le porter en tant que sac à dos ou en tant que sac cabas. Ensuite, le compartiment séparé au bas du sac comprend un étui amovible pour ton appareil photo Reflex plus objectifs et accessoires. Tu peux garder tes autres objets indispensables dans la moitié supérieure qui comprend également une housse pour ton iPad. Tu ne pars pas pour une séance photo? Alors enlève l'étui et planque tes snacks ou délicieux breuvages dans la partie inférieure. Besoin de transporter de grands objets ? La poche zippée faisant office de trappe entre les deux compartiments te permet de les combiner pour un espace de stockage maximum. Convient à: Appareil photo Reflex semi-professionnel avec objectif de taille moyenne + objectif de taille moyenne + flash + accessoires + tablette (jusque 10") avec housse Dimensions externes: 39 x 45 x 16 cm Dimensions internes: 38x 33.5 x 15.5 cm Compartiment photo: 26 x 10 x 14 cm Volume: 13 litres Poids: 600 grammesPourquoi les sacs pour appareil photo devraient-ils ressembler à des sacs pour appareils photos? Il n'y a justement aucune raison. La collection Doozie Photo est une série de sacs conçus pour ceux à la recherche d'un sac pour appareil photo alliant simplicité et style. Grâce à sa polyvalence, cette gamme de sacs chics et basiques utilisables au quotidien complètera ta tenue quoi que tu portes. Intemporel dans son approche minimale du design, le Doozie fait des étincelles grâce à de petites mises en valeurs ingénieusement placées telles que des coutures et fermetures éclairs colorées. La collection Doozie Photo a encore plus d'un tour dans son sac grâce à ses housses - des étuis amovibles pour matériel photo qui te laissent le choix d'utiliser ton Doozie comme sac photo ou de tous les jours. Avec notre boutique, oubliez le stress des livraisons hors-délais (voir nos évaluations). Nos partenaires s'engagent à livrer vos colis dans les meilleurs délais, de manière rapide, simple et efficace ! La livraison est gratuite à toutes les adresses autres que des boîtes APO / PO dans la France et la Belgique. Notre stock se trouvent dans des entrepôts basés en France. Toutes les commandes sont expédié via DHL, La Poste, Chronopost ou UPS (selon l'emplacement et le poids du colis). Sauf indication contraire, toutes les commandes seront expédiées dans les 48 heures suivant la date de votre paiement. Consultez nos évaluations positives pour voir les bonnes critiques sur la rapidité de nos livraisons que nous vous offrons. Shipping is FREE to all addresses other than APO/PO boxes in the lower 48 states, France and Belgium. Our stock all ships from our France-based warehouses. Shipped via USPS, DHL, La Poste, Chronopost or UPS (depending on location and package weight) Unless stated otherwise, all orders will ship within 24 hours of your payment being processed. Check our feedback to see the great reviews of FAST shipping we offer.  PAIEMENT PAYPAL: Gardez l'esprit tranquille. PAYPAL protège vos achats. Si vous n'êtes pas livré ou que l'objet ne correspond pas à sa description, ils vous rembourserons et vous aiderons à trouver une solution avec nous (soumis à conditions). Nous offrons une politique de retour de 14 jours pour nos produits. Nous sommes derrière nos produits. Les articles peuvent nous être retournés pour échange ou remboursement complet dans les 14 jours à compter de la date de réception de votre marchandise. Nous ne sommes pas responsables pour tout achat après cette période de 14 jours. Les frais de retour sont de la responsabilité de l'acheteur sauf si le retour est le résultat de notre erreur. Nous prenons à notre charge les frais de renvois si un échange est demandé. Si vous avez des questions s'il vous plaît contactez-nous par «Posez une question au vendeur". Nous vous répondrons dans 1 jour ouvrable ou moins. Tous les retours doivent être effectués dans les 14 jours à compter de la date d'achat et UNIQUEMENT avec notre étiquette retour !! S'il vous plaît noter que nous ne pouvons plus rembourser après la limite de 14 jours. Lors d'un retour, veuillez noter que cela peut prendre jusqu'à 7 jours ouvrables pour que le retour soit traiter. Nous faisons de notre mieux pour traiter le plus rapidement possible. PAY SAFE: PAYPAL PAYMENT IS ACCEPTED We offer a 14-day return policy for our products. We stand behind our products. Items can be returned for exchange or full refund within 14 days from the date you receive your merchandise. We are not responsible for any purchase after this 30-day period. Return shipping is the responsibility of buyer unless the return is a result of our mistake. We will pay for shipping replacement back to you if an exchange is requested. If you have any questions please contact us through "Ask seller a question" link. We will respond within 1 business day or less. All returns must be done within 14 days of the date of purchase. Please note that we cannot give refunds after the 30 day limit has expired. When sending in a return, please note that it can take up to 7 business days for the return to be processed. We do our best to process as quickly as possible.)

Mapex Orion Blue Mist Burst 6 Piece Drum Kit  No longer made by Mapex and so they are a rare breed  Kit:  22x24" bass drum  10x8 tom 12x10" tom  14x12" floor tom  16x13" floor tom  14x5,5" Snaredrum   Kit is in used but very good condition.  There are areas of minor damage (on the bass drum where you fix the bass drum pedal…) These don't affect the sound !!:)  Stands included (for free)  :  - Mapex TS950A (Double Braced Double Tom Stand w/ Individually Adjustable Arms)  - Mapex B990A (Double Braced 2-Tier Double Boom Stand - without original boom arm - mine are two "no name" not Mapex)  Cymbals:  - 22’’ K Constantinople Medium Thin Low (barely used - awesome sound !!!!!!!!!)  - 21’’ K Custom Special Dry Ride (Barely used -awesome sound too !!!!!!)  - 20’’ K Ride (old - Very impressive sound)  - 17’’ Zildjian A Custom Projection Crash  - 17’' Zildjian K Custom Dark Crash (cracked) - 14’’ K Custom Dark Hi Hat  Hardware:  - DW 9500TB Hi-Hat Stand 2 Legs / BIPOD - Pearl P-2002C Eliminator Foot Pedal with NEW Pearl DS-300A Z Link DriveShaft Assy Driveshaft (a must have ! It cost 239€…)   - Pearl S-2000 Snare Drum Stand  - Mapex Snare Drum Stand (high end)  - Pearl D-1000 Drum Throne (I can add two of them cause I have two)  I can add cases (for free of course:)):  - SKB CV24W 24" Cymbal Case - SKB Drumcase Set Jazz  - D6514 14"x 6,5" Snare Case - D0910 10" x 09" Tom Tom Case - - D1012 12"x10" Tom Tom Case - D1414 14"x14" Tom Tom Case - D1820 20"x18" Bass Drum Case I can also add (again for free:)):  - Pearl BD-10 Bass Drum Pad - Evans EVARF12G Practice Pad REALFEEL 12 STANDARD I also have:  - LP 229 Mambo Cowbell - LP 228 Black Beauty Sr. Cowbell also some Drumsticks / Brushes:  - American custom T1 general Timpani Mallet (gently used)  - Vic Firth Heritage Brush (used)  - Zildjian Dennis Chambers Signature  - Vic Firth Tony Royster Jr. Signature  - Vic Firth Omar Hakim Nylon Signature  - Vic Firth Dave Weckl Evolution Signature  - Pro Mark Ringo Star Signature  - Vic Firth Buddy Rich Signature  - Vic Firth Peter Erskine Signature  - Vic Firth American Sound Hickory AS5A (x2: 1 used + 1 new)  - Vic Firth American Sound Hickory AS5A (new)  - Vic Firth American Jazz Hickory AJ1 (used)  - Vic Firth American Classic Hickory F1 (x2,5: 1,5 used + 1 new)  - Zildjian Hickory 7A  All signature are new except the Peter Erskine  and also:  - Evans SOSETFSN Fusion Sound Off  - 2x Evans SO-Cym Sound Off Damper (x2)  - Paiste Cymbalcleaner  - Euro Sprint Hiker (my drumming shoes, I love them but these are made with leather and I would prefer to have some Pinatex / cruelty free / Vegan shoes now… I changed my mind about leather)  The drumhead / Drumhead are OK (in my opinion…)   Any questions, I would be delighted to answer them for you so please get in touch.  Local pickup or buyer arranged shipping  (shipping will be very expensive for all that)  Delivery is possible to anywhere

support projecteur support mural beamer inclinable pivotant plafond Description: Individually adjustable, universally useful: the perfect wall or ceiling mount for your presentations or home cinema system. Stylish wall or ceiling mount for projectors: whether you're organizing a conference or setting up your home cinema system, this mount is for you. Secure, safe - Designed to keep your projector safe and steady while blending perfectly into the surrounding room, you won?t find a better solution to your projector needs. Advantages: Easily mounted either on the wall or ceiling Easy to install Cable run inside arm  no need to worry about messy hanging cables Universal mount Features: 4 arms for optimal safety Stable steel construction Easily adjustable distance from wall or ceiling  43-65cm Tilts forward, backwards, and sideways (15 degrees) Black design blends effortlessly into the background Loading capacity 66 lbs (30 kg) Adjustable tilt Without extension pole, the mount height is 5.1"" With extension pole,  height adjustable from 10.8"" - 19.5"" The maximum distance between   any two holes is less than 13.7 in/350mm in diameter Compatible with projector has 3 holes pattern or 4 holes pattern Extension pole,  standard mounting hardware and user manual are included

The MATCH-IT and MATCH-IT2 allow the benefits of inexpensive domestic and semi-professional source equipment to be applied to the professional installation with minimum compromise in sound quality. As well as substantial cost savings, such machines also offer wider choice and availability compared to their professional brethren and, if well chosen, can prove extremely reliable. Mounted as close to the source equipment as possible, the MATCH-IT/MATCH-IT2 translate between the low level, unbalanced signals used by consumer devices and the higher amplitude, more noise-immune, balanced format found in the professional environment. From that point onwards, mains hum and interference from densely packed equipment will be rejected. Both units are packaged in a robust metal case suited to mounting on rack shelves or in the Canford “Rack-Pak”, beneath woodwork or inside rack cabinets by means of screws, ties or sticky pads. They are supplied with a mains lead, comprehensive instructions and a five year warranty. MATCH-IT Bidirectional Matching Unit Provides matching in both the record (balanced to unbalanced conversion) and replay (unbalanced to balanced) directions for one piece of domestic recording equipment, such as a tape or Mini-Disk recorder. The gain of both sections may be individually varied over a wide range that includes 0dB for higher level sources requiring balancing but no amplification. Technical Specification:Unbalanced to balanced sections (MATCH-IT and MATCH-IT2):Inputs:Unbalanced, RCA (phono)Input impedance:22k ohms Maximum input level:+24dBuNominal gain range:0dB to +25dBOutput noise:-94dB RMS re +8dBu O/P (20Hz-22kHz, +14dB gain)Harmonic distortion:0.005%THD (1kHz, +8dBu O/P)Frequency response:20Hz-20kHz ±0.1dBOutputs:Electronically balanced, XLR maleMaximum output level:+24dBu (10k ohms load), +23.5dBu (600ohms load)Balanced to unbalanced sections (Match-IT only):Inputs:Electronically balanced, XLR femaleInput impedance:20k ohms Maximum input level:+25dBuInput CMRR:60dB typ.Nominal gain range:-25dB to 0dBOutput noise:-94dB RMS re +8dBu I/P (20Hz-22kHz, -14dB gain)Harmonic distortion:0.005% (1kHz THD, -14dBu O/P)Frequency response:20Hz-20kHz ±0.1dBOutputs:Unbalanced, RCA (phono)Maximum output level:+24dBu (10k ohms load)MATCH-IT and MATCH-IT2:Power supply:230 VAC ±10% at 6VA (115V to special order)Dimensions(excluding connectors):294(w) x 114(d) x 44(h)mmWeight:0.9kg CONTACT for INTERNATIONAl SHIPPING FEES

Câble 4 paires de 15 mètres avec connecteurs NEUTRIK XLR3 NC3 (4 mâles et 4 femelles. État : "Occasion" Je vends ce câble parce que je n'en ai plus l'utilité. C'est une fabrication personnelle à laquelle j'ai veillé à ce qu'elle soit de très bonne qualité. Les épanouis mesurent environ 50 cm et leur protection est renforcée avec de la gaine thermorétractable. Il à été utilisé que 2 ou 3 fois pour des animations entre amis et en intérieur (table de mixage vers enceintes façade et retours de scène). Il est en très bon état. Ce câble est composé de: -15 mètres de câble: Sommer Cable Quantum Highflex Multipair 4 Very High Quality 4-Pair Multicore CableFor live and studio purposes as well as permanent installations Technical Data: - Complete lytorsion-free - Cold-resistant up to -30° - Pairs of wires insulated individually with rubber sheath - Cu coil shielded with 99% coverage - Low capacitance of 45 pF cable/cable - 110 Ohm (AES/EBU), compliant over hundreds of metres - Cable cross-section: 0.14 mm² - Sheath:S-PVC - AWG- AWG24 - Conductor insulation: Skin PE - Shielding: Cu coil, paired - Coverage: 99%; Temperature range: -30° to 70° - Sheath colour: Black, matte ElectricalData: - Capacitance cable/cable at 1 m: 45 pF - Capacitance cable/shield at 1 m: 90 pF - Conductor resistance at 1 km: - Insulation resistance at 1 km: > 1 GOhm - Characteristic impedance: 110 Ohm - Outer diameter: 10.2 mm -4 connecteurs: Neutrik NC3 FXX-B Fiche XLR femelle 3 broches - Fiche noire - Contacts plaqués or -4 connecteurs: Neutrik NC3 MXX-B Fiche XLR mâle 3 broches - Fiche noire - Contacts plaqués or

Welcome! For sale is Electro-Voice CPS4.10 apmlifier with 4 channels of each nominal output is 1000W. MSRP: 3200 US$ Amplifier was never used (just tested before i made this listing) and it is 100% operational. See more technical details below. Shipping We will ship to any location worldwide. Please send us message for shipping cost to your location. All customs fees are not included in the international shipping costs. Buyer is responsible for all customs fees.  Please contact us if you have any question regarding this item.  CPS4.10 This four-channel CPS amplifier from Electro-Voice features groundbreaking Class-D technology for maximum amp efficiency and minimized heat dissipation in 19-inch racks. Each channel individually provides transformerless, switchable output characteristics, which enable specific channels to achieve maximum drive. Power into 2 Ohms, 4 Ohms, 70V, or 100V line – no transformers are required. In Hi-Z operation (70V or 100V), a 50 Hz high-pass filter (HPF) provides protection against loudspeaker transformer saturation. Additionally, amplifier channels can be bridged in pairs for double output power. Each contractor-friendly, multi-channel CPS amplifier also features Phoenix-type connectors for inputs and outputs, pre-programmable power-on delay, easy power-on remote via contact closure, and rear level controls. A module slot for the RCM-810 remote control module provides control network functionality, allowing for remote system diagnostics and control via IRIS-Net software. In addition, using the RCM-810’s Variable Load Drive feature can tailor the amplifier’s output power to match every load from 2 Ohms up to 10 Ohms in steps of 0.1 Ohms. Features: - Class-D design for high-efficiency and low heat dissipation - Flexible matching for Low-Z and High-Z applications - Optional remote control via IRS-Net - Four-channel design in 2RU chassis Specifications: - Maximum Midband Output Power (THD=1%, 1kHZ): 4 x 1000W @ 2 ohms 4 x 1000W @ 4 ohms 4 x 1000W @ 70V 4 x 1000W @ 100V - Rated Output Power (THD 4 x 900W @ 2 ohms 4 x 900W @ 4 ohms 4 x 900W @ 70V 4 x 900W @ 100V  - Maximum Bridged Output Power (THD=1%, 1kHz) 2 x 2000W @ 4 ohms 2 x 2000W @ 8 ohms 2 x 2000W @ 140V 2 x 2000W @ 200V - Maximum RMS Voltage Swing (THD=1%, 1kHz, per channel): 100V - Power Bandwidth (THD=1% ref.1kHz, half power @ 4 ohms load): 10Hz-25kHz, 50Hz-25kHz  - Voltage Gain, ref. 1kHz: 32 dB (2ohm/4ohm mode), 33dB (70V mode), 36dB (100V mode)  - THD at rated output power (MBW=80kHz, 1kHz): - IMD-SMPTE, 60Hz, 7kHz: - DIM30, 3.15kHz, 15kHz: - Maximum Input Level: +21dBu - Crosstalk, ref. 1kHz at rated output power: - Frequency Response, ref. 1kHz: 10Hz-30kHz (+/-1dB) - Input Impedance, active balanced: 20k ohms - Damping Factor, 1khz, 8 ohms: >240 - Slew Rate: 28V/us - Output Noise, A-weighted: - Output Stage Topology: Class D - Power Consumption, 1/8 max. output power @ 4 ohms: 840W - Power Requirements: 220-240V, 50-60Hz or 120V, 50-60Hz or 100V, 50-60Hz - Protections: Audio Limiters, Temperature, DC, HF Short Circuit, Peak Current Limiters, Inrush Current Limiters, Turn-on Delay - Cooling: Front-to-rear, continuously variable fans - Ambient Temperature Limits: 40 to 105 deg. F - Safety Class: I - Dimensions (W x H x D): 19" x 34.7" x 16.6" - Weight: 24.6 lbs - Optional Accessories:  2-way internal X-Over cards, 24dB, LR, XHP-5 for 500Hz/XHP-8 for 800Hz RCM-810 IRIS-Net Control & Supervision Module Rear-Rackmount Kit RMK-15

ARCAM R PLAY Network Audio Player DAC. IN PERFECT CONDITION. The rPlay is the latest addition to the rSeries and allows you to add network audio streaming services and internet radio to any system using DTS PlayFi, Apple Airplay® or UPnP enabled music sources. It also features an SPDIF output that can be connected to an AVR, such as the AVR850. The rPlay benefits from Arcam’s more than twenty years of digital audio expertise and use the finest quality parts in a layout that is optimised for low noise and minimum distortion. The four-layer PCB allows our designers to maximise the quality of the ground plane in order to further reduce interference between components. The use of multiple low noise individually regulated power supplies ensures the rPlay delivers the cleanest signal to the audiophile quality output stage. As well as a fixed line level analogue output, the rPlay also features a variable analogue output which uses the same volume control as the A49 flagship amplifier. The rPlay’s WiFi is compatible with 802.11 b/g/n but it also hosts a wired Ethernet (RJ45) connector for the most reliable results from your network. The rPlay is one of the simplest ways to enjoy streaming audio services regardless of platform and brings Arcam quality sound to a whole new generation of music lovers. The rPlay will be available from February 2017. Arcam rPlay for High Quality Music Streaming

Vend mixette de reportage Sound Devices 442 + sacoche Petrol + 2 cables de connection camera 4 Balanced XLR Inputs The mixer's flexibility begins with it's 4 balanced XLR inputs. All 4 inputs are individually switchable to accept line or microphone level signals. Direct Outputs Every input features a dedicated output via TA3-male connectors. The direct outs are ideal for feeding individual channel signal to external devices. M-S Decoding Channels 1-2 can be linked for stereo capturing and M-S stereo monitoring. Channel 1 features a phase reverse switch. Variable Gain Continuously variable gain allows level contouring on every channel, resulting in higher signal to noise ratio. Variable Low-Cut Filter Continuously variable low-cut filter dials are located on each channel, eliminating low frequency noise between 80 - 240Hz Peak Limiting Input and output peak limiters eliminate signal over load that can cause noise and distortion.

Theta Digital Generation VIII series 3 DAC/Preamp Complete with manual, remote control, and original packaging. 230 V version. This is a serie 1 unit factory upgraded to serie 3 in 2011. Rated only "good condition" because front standby button is a bit hard (but working). Cosmetics are very good and unit is working flawlessly on all inputs. Inputs are individually configurable. You also have one analog input (unbalanced or balanced). Check company's website for full description:    Generation VIII Series 3 | Theta Digital

MAMIYA AUTO EXTENSION TUBE NA403   FEATURES The NA403 is the longest (approximately 35 mm) of three separately available NA tubes, these tubes are meter coupled but DO NOT couple with the auto focus system. It can be mounted on to the 645-series cameras from Mamiya / Phase one (AF, DF, DF+ & XF) It attaches between the camera body and lens and allows your lens to focus closer than its normal minimum focus distance. By placing distance between your camera body and lens, focusing distance is shortened and the effect of magnifying your subject is created. Extension tubes enable macro performance for lenses not otherwise able to focus that close, and are also suited for close-up portraiture. - Shortens minimum focus distance - Supports automatic exposure - Can be used individually or combined - Metal mount INCLUDED Box & user notice front & rear caps CONDITION Mint   FUNCTION Tested, works flawlessly   NOTE All pictures included in this ad are of the actual item If you have any questions, I'll be happy to answer them   European Economic Community buyers:  no customs clearance is levied on goods travelling within the customs union, which means you will not have to pay any fees or export duties if you are a EEC resident.