With without

Superbe appareil photo reflex pour film 35mm, format 24x36 CANON F1 Old équipé de son dos Canon film Chamber 250 pour exposer 250 vues, d'un objectif FL 50mm f:1.8 et de son motor drive Unit avec son alimentation. - Boitier en très bel état, de très très faibles traces d'utilisation. La cellule fonctionne (livrée sans pile), toutes les vitesses fonctionnent. Le retardateur fonctionne. - Objectif Canon FL 50mm f:1,8 en bon état. Pas de rayure, pas de traces de nettoyage. Les bagues de mise au point et diaphragme sont souple et fonctionnent parfaitement. - le dos canon pour 250 vues est en bel état (il manque un bouton qui se visse sous l'une des bobines, ce qui n'empêche pas la bonne marche de l'ensemble), ainsi que le motor drive unit qui fonctionne, voir la vidéo en copiant le lien suivant: https://youtu.be/mEd3Npg6iYE - 2 chargeurs pour 250 vues inclus avec le dos - Bobineuse Canon en bel état. Manque un bouton au dessus du compteur. Le petit trépied visible sur les photos n'est pas inclus dans la vente Matériel non testé avec un film et vendu pour collection. Tout ce qui est dans ce set est visible sur les photos, aucun autre accessoire de disponible. PAS DE VENTE SEPAREE. Expédition pour la France: 35 euro AVEC assurance pour 1000 euro, Livraison par Mondial Relay SANS assurance: 12 euro Remise en main propre possible au marché aux Puces de Saint Ouen les lundi sur rendez vous. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Superb reflex camera for 35mm film, 24x36 format CANON F1 Old equipped with its Canon film back Chamber 250 to expose 250 frames, an FL 50mm f:1.8 lens and its motor drive Unit with its power supply. - The camera body is in very good condition, with very slight signs of use. The light meter works (delivered without battery), all speeds work. Self-timer works. - Canon FL 50mm f:1.8 lens in good condition. No scratches, no traces of cleaning. Focus and aperture rings are soft and work perfectly. - The Canon back for 250 frames is in good condition (a button that screws into the underside of one of the coils is missing, but this does not prevent the unit from working properly), as is the motor drive unit, which works. See the video by copying the following link: https://youtu.be/mEd3Npg6iYE - 2 chargers for 250 frames included with the back - Canon winder in good condition. Missing a button above the counter. The small tripod shown in the photos is not included in the sale. Equipment not tested with film and sold as a collector's item. Everything in this set is shown in the photos, no other accessories available. NO SEPARATE SALE. Shipping for China or U.S.A is 90 euro WITH 1000 euro insured with post office. Shipping for UE with post office is 42 euro WITH insurance for 1000 euro. Shipping cost with mondial relay for WITHOUT insurance for Belgium, Luxemburg, Nederland, Portugal, Spain, Germany, Italia and Austria: 22 euro En savoir plus Collaboration commerciale.

BOLEX H16 RX with KERN VARIO SWITAR EE 1:2.5 f 18/86 mm   Functional integrated automatic exposure meter and diaphragm !!                                       n ° 135905                           (traduction en français ci-dessous) Condition  of conservation and excellent cosmetic! The drive motor turns freely without problem. This set is fully functional and can be used for filming in 16 mm !! *** Please note that this camera has undergone a revision reflex sight system level! The lenses and prisms have been removed, checked and cleaned! Over time (often several decades) without maintenance the eyepieces and aiming prisms eventually become opaque. The aim becomes blurred and unspecified! (photo 12) Also check and clean the film presser. As well as the feed dog A film test (unimpressed) was performed to verify the correct unfolding of the film. And the absence of scratches! On the other hand, the motor drive system has been lubricated and tested! The brushed and shiny metal parts! These maintenance operations are rarely or even never offered by the sellers of BOLEX cameras! Ask them! You will be surprised ! Their cameras are sold as they are, directly taken from the attic with their dust and their dysfunctions..! No wonder these operations require experience technical and know-how! This camera is equipped with a handle and a lens: KERN VARIO SWITAR 1: 2.5 f 18/86 mm EE for BOLEX H16 RX                                       n ° 1056895 This fabulous lens specially designed for BOLEX H16 cameras is in a very good state of conservation The glasses are clear with no scratches or visible presence of mold The zoom control works perfectly A lever  allows it to be operated  This lens was designed specifically for H-16 and SLR cameras features a fully automatic iris control with a photo-resistance (exposure meter) to cadmium sulfide sensitive to values of films from 10-400 ASA. ******* Please note that most KERN lenses of this type offered for sale on this site have an integrated light meter which does not does not work ! (Cadminium sulfide, an essential element of the light meter, degrades with  time, especially in a humid atmosphere and eventually does not work anymore) ******* Whoever is integrated into this objective is in working order: the diaphragm opens and closes depending on the brightness! (photos 9) You can therefore use it automatically to film in 16 mm !! The diaphragm will react to the next closing or opening the lighting!.photo 9 No need to burden yourself with an auxiliary light meter! And correct manually the diaphragm permanently! The filmed scenes will be perfectly exposed! New mercury-free batteries are now available for supply the light meter. (photo 10) They are perfectly compatible! This is the type of battery: brand EPX625G 1.5 volt "Energizer" or others that you can get on or anywhere in the world! An original KERN metal sun visor is delivered with this zoom The "altuglass" presentation base is not part of the offer ******                                              **** Please read the general sales instructions before bidding or buying                (below) your submissions are worth acceptance.                            Thanks for your interest *** *********** Foreign Buyer (Outside the European Union) contact me before bidding. To determine the shipping costs (depending on the country) For buyers outside Europe the payment is made only by PayPal. The delivery address is exclusively the address "confirmed" by PayPal. **************  Failure to comply with these clauses cancels the order! Thank you for your understanding **********************

Superbe boitier Nikon F5. Fonctionne parfaitement. Quelques infimes traces visible sur les photos. Livré tel que visible sur les photos, dans sa boite d'origine, avec sangle et mode d'emploie. Rien d'autre de disponible.  Livraison sans assurance 15 euro. Livraison avec assurance 25 euro Very nice Nikon F5 reflex camera for 35mm film. Works perfectly. A few tiny traces visible on the photos. Delivered as seen on the pictures, in its original box, with strap and instructions. Nothing else available.  Shipping for China or U.S.A is 55 euro WITHOUT insurance with post office, and 110 euro WITH  insurance with UPS or similar  Shipping for UE is 25 euro WITHOUT insurance with post office or 45 euro WITH insurance Post office and Chronopost are fully working in this trouble times. No problem for shipping, except for USA, the awaiting could be very long with post office

Remise en vente de cet appareil suite a fol enchère d'un acquéreur indélicat: Superbe boitier Nikon F5. Fonctionne parfaitement. Quelques infimes traces visible sur les photos. Livré tel que visible sur les photos, dans sa boite d'origine, avec sangle et mode d'emploie. Rien d'autre de disponible.  Livraison sans assurance 15 euro. Livraison avec assurance 25 euro Very nice Nikon F5 reflex camera for 35mm film. Works perfectly. A few tiny traces visible on the photos. Delivered as seen on the pictures, in its original box, with strap and instructions. Nothing else available.  Shipping for China or U.S.A is 55 euro WITHOUT insurance with post office, and 110 euro WITH  insurance with UPS or similar  Shipping for UE is 25 euro WITHOUT insurance with post office or 45 euro WITH insurance Post office and Chronopost are fully working in this trouble times. No problem for shipping, except for USA, the awaiting could be very long with post office

8 legendary Class A mic preamps in the same class as the Focusrite ISA and RED ranges. They don't make them like this anymore... This unit is in very good condition - see pictures: front face is pristine with no scratches, only a few usage scratches around the rack ears from installation (marks will be hidden again after mounted onto a rack). It never left the studio. The Octopre provides eight pristine discrete channels of Focusrite Class A mic preamp and compression, OctoPre PLATINUM routes directly to any digital audio workstation via eight standard analogue outputs. Each channel features a revolutionary compressor/limiter circuit, providing a warm-sounding compressor, which morphs into a brick wall limiter to avoid those critical overs, ensuring total control over all eight channels. The mic preamps featured in OctoPre PLATINUM are similar to those featured in the award winning Focusrite Top-Of-The-Range. They are a transistor-based Class A design utilising the same full-bandwidth philosophy as the legendary RED and ISA mic preamps, ensuring detail and clarity without colouration. The first two 'super channels' also feature phase reverse, as well as TRS jack inputs on the front fascia for quick and easy, DI-free instrument plug-in. Eight line level balanced (+4 dBu) analogue inputs and outputs are provided as standard via 25-pin D-type connectors. These D-type connectors may be routed to 8 XLR/TRS by means of an (optional) 8-way 25-pin D-type to 8 XLR/TRS breakout cable, available separately. In addition to the analogue outputs, the OctoPre can be fitted with digital output (OPTIONAL CARD). Detailed description from the focusrite website: The OctoPre is an eight channel Class A microphone preamplifier, featuring a classic Focusrite mic pre and a revolutionary compressor/limiter circuit on each channel. The mic pres featured in the OctoPre are similar to those featured elsewhere in the award winning Focusrite Platinum range. They are a transistor-based Class A design utilising the same full bandwidth philosophy as the legendary Focusrite Red and ISA mic pres, ensuring detail and organic clarity without obvious colouration. The revolutionary compressor/limiter circuit provides each channel with warmsounding compression, which morphs into brick wall limiting to avoid critical ‘overs’ when recording digitally. The first two channels also feature phase reverse, as well as unbalanced 1/4” jack inputs on the front fascia for quick and easy, DI-free plug-in of guitars and basses. With Class A Focusrite analogue signal processing and comprehensive A/D interface options, OctoPre is the perfect partner for a Pro Tools™ system or any other digital audio workstation, making high quality, multi-channel recording easy. Equally, it could be utilised as part of a compact multi-channel location recording solution (with a laptop or ADAT™, for example), or as an additional set of professional-quality mic pres for any analogue or digital console or hard disk recorder. The original OctoPre is a typical Class A Platinum design, (based around a 737 Rhom transistor) and it is solid state, it has extended bandwidth (up to at least 180kHz at the top end) and sounds transparent. The original OctoPre has an edge in being more forgiving if you want to slam the pre's hard (but more 2nd order harmonic distortion as a result). -The Octopre has a dynamics (compressor/limiter) control on each channel -The Octopre has 48V phantom power switches on each channel -The Octopre has line in and out connections on 25 pin D-sub connectors and 8 XLR inputs for mics Performance specifications: THD:0.001% @ 20dBu input, mic and line at 0dB gain Noise:-96 dB at unity gain through the unit Mic EIN:-128 dBu @ 6dB of gain with 150Ω termination impedance Frequency response:-1 dB at 10 Hz to 200 kHz Carefully packed with powercord. Shipping France: 27,80 € Shipping Europe: 36,30 €

projection lens 35 KP 140mm F1.8 M42 mount with helicoid. État : Occasion Service de livraison : Colissimo Recommandé Version planar, 6 éléments, environ 1.6kgLes lentilles sont propres, la bague de mise au point est fluide Vendu avec le bouchon avant (95mm) et le bouchon arrière. Je peux ajouter une bague EOS/M42 sans puce si besoin à pleine ouverture c'est un peu soft mais c'est ça qui fait le charme de cette optique.J'ai "bricolé" un système qui simule un diaphragme à l'aide de diverses bagues d'adaptation ce qui permet d'avoir du F1.8, F2.8 et F4 (à F4 l'objectif est très piqué). Ce système n'est pas définitif, la première bague est simplement fixée à la patafix + du gaffer par dessus. ------------------------------------------------------------------------------------------------- Quite rare 35 KP 140mm F1.6 Planar version (6 elements) with custom high quality helicoid (made by an Ukrainian master) around 1.6kg ! Glass is clean, no fungus, maybe few dust particles and/or micro bubbles Focus is smooth I did a DIY kind of aperture system with step-down ring: with 1 ring it's equivalent to F2.8 and with all rings it's equivalent to F4, so it's very sharp ! That system can be removed without problem, the 88-86mm ring is just "glued" with patafix. I can add an EOS/M42 adapter (without chip) for free If you have any question, send a message

projection lens 35 KP 140mm F1.8 M42 mount with helicoid. État : Occasion Service de livraison : Colissimo Recommandé Version planar, 6 éléments, environ 1.6kgLes lentilles sont propres, la bague de mise au point est fluide Vendu avec le bouchon avant (95mm) et le bouchon arrière. Je peux ajouter une bague EOS/M42 sans puce si besoin à pleine ouverture c'est un peu soft mais c'est ça qui fait le charme de cette optique.J'ai "bricolé" un système qui simule un diaphragme à l'aide de diverses bagues d'adaptation ce qui permet d'avoir du F1.8, F2.8 et F4 (à F4 l'objectif est très piqué). Ce système n'est pas définitif, la première bague est simplement fixée à la patafix + du gaffer par dessus. ------------------------------------------------------------------------------------------------- Quite rare 35 KP 140mm F1.6 Planar version (6 elements) with custom high quality helicoid/focus ring (made by an Ukrainian master) around 1.6kg ! Glass is clean, no fungus, maybe few dust particles and/or micro bubbles Focus is smooth I did a DIY kind of aperture system with step-down ring: with 1 ring it's equivalent to F2.8 and with all rings it's equivalent to F4, so it's very sharp ! That system can be removed without problem, the 88-86mm ring is just "glued" with patafix. I can add an EOS/M42 adapter (without chip) for free If you have any question, send a message Shipping is quite expensive but the lens is heavy and it will need lot of protection

projection lens 35 KP 140mm F1.8 M42 mount with helicoid. État : Occasion Service de livraison : Colissimo Recommandé Version planar, 6 éléments, environ 1.6kg Les lentilles sont propres, la bague de mise au point est fluide Vendu avec le bouchon avant (95mm) et le bouchon arrière. Je peux ajouter une bague EOS/M42 sans puce si besoin à pleine ouverture c'est un peu soft (tout dépend la personne) mais c'est ça qui fait le charme de cette optique. J'ai "bricolé" un système qui simule un diaphragme à l'aide de diverses bagues d'adaptation ce qui permet d'avoir du F1.8, F2.8 et F4 (à F4 l'objectif est très piqué). Ce système n'est pas définitif, la première bague est simplement fixée à la patafix + du gaffer par dessus. ------------------------------------------------------------------------------------------------- Quite rare 35 KP 140mm F1.6 Planar version (6 elements) with custom high quality helicoid/focus ring (made by an Ukrainian master) around 1.6kg ! Glass is clean, no fungus, maybe few dust particles and/or micro bubbles Focus is smooth I did a DIY kind of aperture system with step-down ring: with 1 ring it's equivalent to F2.8 and with all rings it's equivalent to F4, so it's very sharp ! That system can be removed without problem, the 88-86mm ring is just "glued" with blu tack and some gaffer on it. I can add an EOS/M42 adapter (without chip) for free If you have any question, send a message Shipping is quite expensive because the lens is heavy and it will need lot of protection

BOLEX Underwater Housing with camera BOLEX "M" + KERN f= 10 mm                  Vintage  (1955)                              (traduction en français ci-dessous) Underwater housing designed to film underwater at great depths Made in a very thick metal It easily withstands the strongest pressures up to 100 meters deep (330 feets) Very easy to use: fitting and removing the camera is do in a few moments, without the aid of any tools! Plus the internal design with compartments. Makes it only weigh in water just enough to keep perfect stability. And gives the diver complete freedom of movement This copy is in exceptional cosmetic condition It is close to new! Watch the use and maintenance tutorial I made on Youtube: https://www.youtube.com/watch?v=FK9_A_fCMCk (this link is not active from this site, please copy it to your "search bar" to access it) This is a complete set including the box and its accessories but also a camera and its lens specially designed for this one! List of delivered material: - BOLEX n ° 229 underwater box with external controls - Iconometric viewfinder - Contrast filter - Camera mounting sole - Diaphragm control ring (KERN f = 10 mm) - Camera winding gear - Wrenches for seals - Sturdy wooden crate - H16 BOLEX camera M series n ° 203146 - KERN lens f = 10 mm 1: 1.6 n ° 545863 - User manual (in French; Description on Youtube ) You can immediately use and film in 16 mm. This material is functional  and usable.! It's not just for decoration !... ** Please note that most rare BOLEX submarine housings offered for sale on this site. Are never equipped with this camera and this wide angle lens specially adapted for shooting aquatic! ***  Personally I offer you the whole complete !! *** This camera has been used very little. The controls have very rare marks of use Look carefully at the photos to convince yourself The drive motor rotates freely without problem. The KERN lens is healthy and cosmetically very good The lenses are clear and the adjustment rings work great The Swiss Company KERN was renowned for manufacturing the best 16mm cinema lenses! The BOLEX M camera can also be used outside the housing! Because the octometer sight and the winding lever of the original engine will also be delivered The weight of the whole is quite high over 25 Kg! Which explains the shipping rate! him too high! But you will agree that I am not responsible for the exorbitant prices charged by postal services..!.. §§§ Foreign bidders residing outside the European Union. or in the French Overseas Territories Shipping is possible worldwide. But please contact me before bidding or buying so that I will communicate the cost of the shipment. Otherwise a billing supplement will be applied! The price varies considerably from one region to another §§§§ Of course, customs taxes and any import costs are at the expense of the buyer. Please check with the authorities of your country  §§§ Ensemble complet de prise de vues sous- marine BOLEX                                   avec      camera BOLEX "M" + objectif KERN f= 10 mm                                   Vintage (1955 ~) Caisson sous - marin conçu pour filmer sous l'eau à grande profondeur  Réalisé dans un métal de forte épaisseur  Il résiste sans peine aux pressions les plus intenses jusqu'à 100  mètres de profondeur  (330 feets) D'un maniement très facile : la mise en place et le retrait de la caméra se  font en quelques instants, sans l 'aide d'aucun outil ! De plus la conception interne avec compartiments. Fait qu'il ne pèse dans l 'eau que juste ce qu'il faut pour garder  une stabilité parfaite. Laissant au plongeur une entière

BOLEX Underwater Housing with camera BOLEX "M" + KERN f= 10 mm                                         Vintage  (1955)                              (traduction en français ci-dessous) Underwater housing designed to film underwater at great depths Made in a very thick metal It easily withstands the strongest pressures up to 100 meters deep (330 feets) Very easy to use: fitting and removing the camera is do in a few moments, without the aid of any tools! Plus the internal design with compartments. Makes it only weigh in water just enough to keep perfect stability. And gives the diver complete freedom of movement This copy has been completely renovated and adjusted! It is like new! Watch the use and maintenance tutorial I made on Youtube: https://www.youtube.com/watch?v=FK9_A_fCMCk (this link is not active from this site, please copy it to your "search bar" to access it) This is a complete set including the box and its accessories but also a camera and its lens specially designed for this one! List of delivered material: - BOLEX n ° 229 underwater box with external controls - Iconometric viewfinder - Contrast filter - Camera mounting sole - Diaphragm control ring (KERN f = 10 mm) - Camera winding gear - Wrenches for seals - Sturdy wooden crate - H16 BOLEX camera M series n ° 203146 - KERN lens f = 10 mm 1: 1.6 n ° 545863 - User manual (in French; Description on Youtube ) You can immediately use and film in 16 mm. This material is functional  and usable.! It's not just for decoration !... ** Please note that most rare BOLEX submarine housings offered for sale on this site. Are never equipped with this camera and this wide angle lens specially adapted for shooting aquatic! ***  Personally I offer you the whole complete !! *** This camera has been used very little. The controls have very rare marks of use Look carefully at the photos to convince yourself The drive motor rotates freely without problem. The KERN lens is healthy and cosmetically very good The lenses are clear and the adjustment rings work great The Swiss Company KERN was renowned for manufacturing the best 16mm cinema lenses! The BOLEX M camera can also be used outside the housing! Because the octometer sight and the winding lever of the original engine will also be delivered The weight of the whole is quite high over 25 Kg! Which explains the shipping rate! him too high! But you will agree that I am not responsible for the exorbitant prices charged by postal services..!.. §§§ Foreign bidders residing outside the European Union. or in the French Overseas Territories Shipping is possible worldwide. But please contact me before you bid to have me communicate the price of the shipment. The price varies considerably from one region to another §§§§ Ensemble  de prise de vues sous- marine BOLEX                                    Vintage (1955 ~) Caisson sous - marin conçu pour filmer sous l'eau à grande profondeur  Réalisé dans un métal de forte épaisseur  Il résiste sans peine aux pressions les plus intenses jusqu'à 100  mètres de profondeur  (330 feets) D'un maniement très facile : la mise en place et le retrait de la caméra se  font en quelques instants, sans l 'aide d'aucun outil ! De plus la conception interne avec compartiments. Fait qu'il ne pèse dans l 'eau que juste ce qu'il faut pour garder  une stabilité parfaite. Et laisse au plongeur une entière liberté de mouvements  Cet exemplaire a été entièrement rénové et réglé ! Il est comme neuf ! Regardez le tutoriel d'utilisation et d'entretien que j'ai réalisé sur Youtube: https://www.youtube.com/watch?v=FK9_A_fCMCk (ce lien n 'est pas actif à partir de ce si

USBMidiKliK3x3 / 3 MIDI IN X 3 MIDI OUT   - The KikGenLabs WARNING: THIS AUCTION IS FOR A PCB ONLY. NO COMPONENTS MOUNTED. This PCB is a prototype and is considered as "new" and is fully working. You must buy components yourself. An easy job. No surface components at all. See schematic at the Github project page:  https://github.com/TheKikGen/USBMidiKliK4x4 The USB MidiKlik 4x4 firmware allows the following features : - The board is USB Powered, so no additional power supply necessary. It works driverless as a class compliant device, with Windows XP SP3, Vista 32 and 64 Bit, Windows 7 / 8 / 10   32 and 64 Bit, and Mac OS X, Linux ALSA, Akai MPC Live/X/Force, IOS, Android.  - USB Powered, no additional power necessary - 4 USB IN / OUT - 3 MIDI IN / 3 MIDI OUT JACKS - Configuration with SYSEX and/or user menu from a terminal connected to the USB serial port - Support of very big SYSEX files transmission - Hardware reset remotely by Sysex  - Sysex to switch to configuration menu serial mode - Ability to change the USB device ProductStringName of the device, and also change the USB Vendor and Product Ids.  Changes persist after power off.  - STANDALONE Mode:  can be used as a standalone MIDI routing box without connecting any host - Stackable:  several interfaces can be used, to get 6x6, 9x9 MIDI ports,  without any conflicts as Name, VID & PID can be changed. - Complex routing rules configurables by sysex or from a user menu - Routing rules allow you to transform the USB MIDIKLIK into a MIDI MERGE or a MIDI THRU very easily. - Ability to route any USB IN to any USB OUT/ MIDI OUT (7 targets possible 4 USB, 3 Midi jack per board) - Midi messages filtering: channel voice, system common, realtime, sysex   The firmware is open source so you can adapt or modify it for you own needs. The project is active. BOM: - BLUEPILL STM32F103C8 - 3x  1N4448 D1,D2,D3 - 3x  6N138 DIP-8 U1,U2,U5 - 6x  220 ohms R4,R5,R7,R8,R1,R3 AXIAL-0.3 - 3x  4.7K R6,R2,R9 AXIAL-0.3 - 3x  10 ohms R11,R13,R17 AXIAL-0.3 - 3x   33 ohms R10,R12,R16 AXIAL-0.3 - 6x  DIN_5_FEMALE_SUPPORT

Up for sale is a very rare collectible Alpa Rangefinder camera Alpa Standard # 11048 With its original lenses Som Berthiot Anastigmat  50mm F/2.8 # 390606 Angénieux Paris Alpotar 90mm F/2.5 # 63.448 Included: Original camera leather case. This is one of the very first rangefinder camera made by Alpa. The production started with number 11000. This example is the version without slow speeds. This set is sold as it was found ! It sold for collection or for repair. Shutter fires but curtains do not finish the release. Rangefinder does not work. The lock off lens system is missing. Lenses need service. Angénieux lens is hazy. Focusing is hard. Berthiot lens is hazy and focusing is blocked. See pictures please ! This set is sold under value for parts or repair because service needed ! It is a special collectible Leica camera but storage many years without use ! Worldwide Shipping Trackcing number inclued Safe packaging France = 13 euros UE = 17 euros Out UE = 28 euros

DEAL OF THE DAY: 25/03/2024 if you are looking for better into your HIFI setup without changing any components, this LAB12 Gordian is to consider,for less than 2200€ (without Cable)you will be able to experience what this power conditioner can bring into your HIFI system.this is the latest Version (2023) with OLED screen.The Price including th french VAT of 20%if you are outside European Union, i will be able to apply to you the Price Excluding VAT, then you will have to pay the VAT Before delivery (Customs Clearance)feel free to ask any questions, it's always nice to discuss with Audio Enthousiast!Ming will be dispatch within the week of your order! 5 years warranty apply to the unit (invoice from date of purchase) En savoir plus

    iFi Audio Micro iDSD DAC and Headphone Amp - with Pre amp Variable out. There is nothing like the micro iDSD. It is literally, out of this world. It is the only DAC in the world (at any price) to play True Native Octa-DSD512/PCM768/Double DXD. Its Perfect-Match means it can be fine-tuned to any headgear from IEMs all the way through to large headphones. Its 8v/4000mW output makes it one of the most powerful headamps to drive even the most hungry of headphones with ease. iFi has forged an enviable reputation for being at the forefront of computer audio technology. The micro iDSD has just made another leap, an Octa-Leap to be precise. With its special Dual-Core Burr-Brown native DSD/PCM chipset at the heart, the micro iDSD is capable of True Native PCM768, Octa-Speed DSD512 and 2x DXD; it is simply out of this world. The micro iDSD has 3 different power modes Eco, Normal and Turbo. Capable of 4000mW, 1000mW or 250mW, the micro iDSD is able to drive the full gamut of headphone and amplifiers alike. With iEMatch there to dial to suit any IEM, the micro iDSD has redefined the headphone amplifier class. Used along with the analogue volume control, the diminutive size of the micro iDSD belies its uncanny ability to drive virtually anything and everything! SmartPower® is the micro iDSD’s onboard recharging feature for Smartdevices. Its 4800mAH battery is able to fully recharge an iPhone two-times. Compatible with Apple and Android, phones and tablets, it is another example of iFi’s commitment to customer needs – enjoy high-end audio on the go without worrying about the phone going flat. iFi’s iCAN and iTube have already achieved widespread acclaim, so much so that their core features including 3D Holographic and XBass have become renowned in their own right and imitated by others. In the micro iDSD, for the first time in an iFi product, it features XBass and 3D Holographic for Headphones and Speakers. All these features are still executed in the analogue, not digital domain to preserve the original music format. And so much more….with the amazing Crowd-Design program, we are over the moon that you, the customer was central to the development of the micro iDSD. The micro iDSD is literally bursting with features – such as Direct/Pre-Amp, 3.5mm input, SPDIF Input/Output and much, much more. You will have to see it to believe it.   Specifications:     Item Description Remarks Inputs/Outputs     Inputs (rear) USB 2.0 type A “OTG” Socket (with iPurifier® technology built-in) Compatible with computers (Apple/Win/Linux), iPhone, iPod Touch, iPad and Android Devices, camera kit or USB-OTG cable required. (Full USB3.0 port compatible)   Intelligent SPDIF® Coaxial 3 Way combo SPDIF port (Coaxial In/Out; Optical In); Up to 192kHz PCM   SPDIF Optical         Outputs (rear) Audio RCA L+R     Intelligent SPDIF® Coaxial Up to 192kHz PCM       Output (right side) SmartPower® Socket Fast charge all portable devices. Compliant with USB Battery Charging Standard 1.2 – 5V @ 1.5A             Controls     Controls (front)     - HP Output Audio 6.3mm Headphone Jack   - Volume with Power On/Off switch Precision analogue volume control - 3.5mm Input   Auto disable the digital section when this is in use - X-Bass® On/Off   - 3D Holographic Sound® On/Off Auto-switching for Speakers® and Headphones® (two separate and distinct circuits)       Controls (left side)     - Power Mode Turbo, Normal, Eco Computer controlled power and gain scaling - Polarity Normal/Inverted   - Filter 3 positions, 6 filters (see filter section below)       Controls (bottom)     - Line Direct/Preamplifier Preamplifier function Enable/Disable, 0/9dB gain selectable Fixed 2V or variable with up to 5V available - iEMatch® Perfect-matching circuit for IEMs (eliminate hiss) Off / High Sensitivity Headphone / Ultra Sensitivity Headphone             DAC section     DAC Dual-core DSD, DXD, PCM DAC by Burr Brown 2-DAC Chip; 4-Channel; 8-Signals, custom interleaving for maximum SNR   Bit-Perfect DSD processing, Bit-Perfect PCM processing         Clock Ultra low jitter GMT computer controlled Femto Clock RMS jitter 12kHz – 1MHz       Audio Formats DSD 512/256/128/64 24.6/22.6/12.4/11.2/6.2/5.6/3.1/2.8 All native decoding, no internal hardware conversion   DXD 2x/1x 768/705.6/384/352.8kHz All native decoding, no internal hardware conversion   PCM 768/705.6/384/352.8/192/176.4/96/88.2/ 48/44.1kHz All native decoding, no internal hardware conversion       Filters     - PCM Bit-Perfect Processing/Minimum Phase/Standard Digital filters selectable - DSD Extreme/Extended/Standard Range Analogue filters selectable - DXD Bit-Perfect Processing Fixed analogue filter             Specifications (DAC Section)     Dynamic Range (Line) >117db(A)   THD & N (0dBFS Line)   Output Voltage (Line) >2V   Output Impedance (Zout)   Jitter (correlated) Below AP2 test set limit               Headphone Power Output     HP Amp Output Power (max) Power (continuous.) - Turbo mode 10.0V/4,000 mW @ 16 Ohm >1560 mW @ 64 Ohm - Normal mode 5.5V/1,900 mW @ 16 Ohm >950 mW @ 32 Ohm - Eco mode 2.0V/500 mW @ 8 Ohm >250 mW @ 16 Ohm             Specifications (Headamp Section)     Dynamic Range (HP) >115dB(A) (Eco Mode, 2V Out)   THD &N (HP 500mW/16R)   Output Voltage (HP) >8V (Turbo Mode)   Output Impedance (Zout)   Maximum Output Power 4,000mW @ 16 Ohm Load when using sinewave testing the iDSD micro may engage protection circuits Continuous Output Power 1,000mW @ 64 Ohm Load  

iFi Audio Micro iDSD DAC and Headphone Amp - with Pre amp Variable out. There is nothing like the micro iDSD. It is literally, out of this world. It is the only DAC in the world (at any price) to play True Native Octa-DSD512/PCM768/Double DXD. Its Perfect-Match means it can be fine-tuned to any headgear from IEMs all the way through to large headphones. Its 8v/4000mW output makes it one of the most powerful headamps to drive even the most hungry of headphones with ease. iFi has forged an enviable reputation for being at the forefront of computer audio technology. The micro iDSD has just made another leap, an Octa-Leap to be precise. With its special Dual-Core Burr-Brown native DSD/PCM chipset at the heart, the micro iDSD is capable of True Native PCM768, Octa-Speed DSD512 and 2x DXD; it is simply out of this world. The micro iDSD has 3 different power modes Eco, Normal and Turbo. Capable of 4000mW, 1000mW or 250mW, the micro iDSD is able to drive the full gamut of headphone and amplifiers alike. With iEMatch there to dial to suit any IEM, the micro iDSD has redefined the headphone amplifier class. Used along with the analogue volume control, the diminutive size of the micro iDSD belies its uncanny ability to drive virtually anything and everything! SmartPower® is the micro iDSD’s onboard recharging feature for Smartdevices. Its 4800mAH battery is able to fully recharge an iPhone two-times. Compatible with Apple and Android, phones and tablets, it is another example of iFi’s commitment to customer needs – enjoy high-end audio on the go without worrying about the phone going flat. iFi’s iCAN and iTube have already achieved widespread acclaim, so much so that their core features including 3D Holographic and XBass have become renowned in their own right and imitated by others. In the micro iDSD, for the first time in an iFi product, it features XBass and 3D Holographic for Headphones and Speakers. All these features are still executed in the analogue, not digital domain to preserve the original music format. And so much more….with the amazing Crowd-Design program, we are over the moon that you, the customer was central to the development of the micro iDSD. The micro iDSD is literally bursting with features – such as Direct/Pre-Amp, 3.5mm input, SPDIF Input/Output and much, much more. You will have to see it to believe it.   Specifications:   Item Description Remarks Inputs/Outputs   Inputs (rear)USB 2.0 type A “OTG” Socket (with iPurifier® technology built-in)Compatible with computers (Apple/Win/Linux), iPhone, iPod Touch, iPad and Android Devices, camera kit or USB-OTG cable required. (Full USB3.0 port compatible) Intelligent SPDIF® Coaxial3 Way combo SPDIF port (Coaxial In/Out; Optical In); Up to 192kHz PCM SPDIF Optical    Outputs (rear)Audio RCA L+R  Intelligent SPDIF® CoaxialUp to 192kHz PCM   Output (right side)SmartPower® SocketFast charge all portable devices. Compliant with USB Battery Charging Standard 1.2 – 5V @ 1.5A       Controls   Controls (front)  - HP OutputAudio 6.3mm Headphone Jack - Volume with Power On/Off switchPrecision analogue volume control DAC section   DACDual-core DSD, DXD, PCM DAC by Burr Brown2-DAC Chip; 4-Channel; 8-Signals, custom interleaving for maximum SNR Bit-Perfect DSD processing, Bit-Pe

About the Arcam rDock-uni: almost like new, very light use, in original box with all the accessories. A dock for audiophiles, a docking station for iPhone/Pad/Pod, that allows the highest quality and easiest fixed connection to any form of Hi-Fi, Home Cinema or Audio system. Featuring the Lightning connector for all current iDevices and USB for older ones, just Dock b'&' Play! owned music AND stream Spotify, Qobuz, RDio, Deezer, Tune-in Radio etc. Get the highest quality audio from your Apple portable with the Arcam rSeries rDock-uni. The dock's Lightning connector is compatible with the latest generation iPhone, iPad, iPad mini® and iPod touch®. When connected, the dock bypasses the digital-to-analog converter (DAC) inside your player, and feeds pure, unprocessed digital data to its own built-in high-performance DAC, which provides more accurate, musical sound. Arcam rDock-uni Lightning connector dock Compatible with Lightning connector iPhone or iPad. Exceptional audio The rDock-uni has a pair of RCA analog stereo outputs, so you can plug it into your home theater receiver or desktop speaker system and enjoy great sound. Does your system already have an outstanding DAC of its own? Then use the rDock-uni 's coaxial digital output to send the signal straight to your outboard DAC. An important part of the Arcam ecosystem The rDock-uni comes with its own remote, which lets you play, pause and skip tracks from your connected Apple portable. You can use the rDock-uni with the Arcam Solo Mini compact stereo receiver, making it even more versatile. Or couple it with the Arcam SonLink DAC for Sonos®. Both of these devices let you control the rDock-uni through their own remotes. Pass-through syncing The rDock-uni's power adapter has a USB plug, so you can either connect it to a wall outlet, or connect it to your computer via a USB port. This also lets you sync your docked player. A USB port in the dock lets you connect older 30-pin Apple portables to the rDock-uni. Just use your portable's charging cable. You'll be able to recharge your older iPod, iPhone, or iPad through the port. What must be said from the off is the rDock is a product for the mature audiophile. It assumes you already have the high end AV system and/or top notch TV (ideally) with surround sound system… and if you do you will be in dream land. Arcam has a well established tradition for producing top notch DACs and here it again lives up to its reputation. By taking the circuitry of an Apple device out the equation the rDock’s DAC is able to process the files without interference. Attach it to a good HiFi with some quality speakers and the DAC adds noticeable richness, drive and detail compared to the bog standard delivery from the iPod/iPhone/iPad alone. Most impressive is the boost to the midrange and bass which bring markedly improved depth and with it a keenly felt layer of emotional involvement. Use the digital SPDIF output and you’re of course reliant on whatever DAC you use further down the line in your AV setup, but it’s a useful addition for if you want to feed your device’s audio to multiple rooms, for instance. Arcam MD Charlie Brennan told StereoNET “Amidst all the fuss about wireless connectivity (including ours:-) the simplest and best solutions can often be ignored. The rDock is the best way to get killer sound from an iPhone/Pod/Pad”. You can safely assume Arcam’s nicely priced rDock-uni will sound terrific. What else would you expect from this UK pedigree brand which has notched up more awards for its ranges of discrete audio-video gear than just about any of its rivals? In perfect working condition and looks. Could consider posting it internationally but please, ask for a quote as the postage differs from country to country and the amount in the description is for European Union only, thanks. Product highlights: stylish and robust cast aluminium case, provides stable support for Pads/Phones and Pods compatible with Lightning connector iPhone, iPad, i En savoir plus Collaboration commerciale.

Yongnuo YN568EX II is a powerful unit compatible with Canon cameras that have E-TTL / E-TTL II control. It features a guide number of 58m at ISO 100 and 105mm for illuminating your subject along with a zoom head with coverage from 24-105mm. Also, the flash can tilt from -7 to 90° and rotates 270° for versatility in bouncing your light. Newly released Yongnuo Flash Speedlite YN-568EX II version is a flash similar to YN-565EX in terms of features, plus some huge upgrades on the new YN-568EX II making it a much more capable tool for digital flash photography, both in the camera hot shoe and in wireless mode. This unit is capable of wireless master/slave TTL functionality when used with other flashes. The YN-568EX II is portable by running on 4 AA batteries and it can recycle in approximately 3 seconds. Other features packed into this flash include 2nd-curtain sync, HSS and a multi-mode. Additionally, it has a PC sync port for remote triggering and comes with stand. Features - Yongnuo YN568EX II supports High-Speed Synchronization – YN568EX II is the first speedlite which supports high-speed synchronization; with high-speed sync (FP flash), the YN568EX II can synchronize with all shutter speeds. The maximum shutter synchronization speed is up to 1/8000. - Compatible with Nikon and Canon wireless flash system – One YN568EX II is able to respectively accept internal flashing of YN568EX II, 580EX II, SB-910/900/800/700, 7D/60D/600D, Canon commander of Nikon’s built-in flashing and ST-E2 wireless signal, achieves off camera TTL and manual flashing. Some functions such as wireless TTL flashing, grouping light ratio TTL flashing and the illumination of remote controlled flashing can be easily achieved only if you carry a camera with built-in flash commander and YN568EX II. - High Guide Number TTL + High Speed Sync – GN58@ ISO100, 105mm; which reaches the level of the mainstream hot shoe flashes, supports HSS, TTL/M/Multi mode. - Multiple triggering mode supported – The YN568EX II can be triggered by the camera set-top, built-in or main-controlled flashing command, S1 and S2 (pre-flash-canceled mode). - Supports auto/manual zooming – The covered focal length can be changed between auto, 24～105mm on the lamp adapter by operating the zoom button on the flash light, supporting full-frame/APS-C cameras. - Comprehensively supports TTL functions – The YN568EX II supports HSS, FEC, FEB, Rear-curtain sync (2nd curtain sync), FE lock, Modeling Light, Canon camera menu accessible - Extreme speed of charging recycle – The time for full power output current-return takes just 3 seconds; you can get fast current-return experience even without brand-new batteries, which takes just 4~5 seconds. - Equipped with 2.5mm PC Synchronisation interface – It makes things easier on lightening the flashlight synchronously by using PC synchronisation port. - Sound prompting system – When the sound prompting system is enabled, the different sound alerts will prompt different working conditions of the flashlight allowing you to focus on shooting. - Aperture preview – Press the camera’s aperture preview button, the YN568EX II will send out continuous flash lasting one second for subjects imaging. - Advanced options function – The YN568EX II has advanced options setting function, where you can self-define the functions of the flashlight to suit your own requirements. - Automatic saving settings – YN568EX II can automatically save your current operating settings to convenient your next use. - LCD display interface, decent appearance - Metal hot-shoe stand, solid and reliable Specifications High-speed SyncThe max. sync speed is 1/8000sGuide No.58 meters (ISO 100, 105mm)Flash modeHigh-speed Sync HSS,TTL, M, MULTIWireless triggerN’s b'&' C’s wireless system, S1, S2 pre-flash-canceled modeWireless triggering distance20~25m indoor, 10~15m outdoorSlave groups3(A, B, and C)Channels4Zoom range24,28,35,50,70,80,105mmVertical rotation angle-7~90 degreesHorizontal rotation angle En savoir plus Collaboration commerciale.

(Français en dessous) I sadly start to sell my huge Canon cameras collection to fund the business project of my daughter.  This very rare camera is one of its nicest pieces. It comes formerly from the Ioannis collection (Belgium).  It is genuinely factory black painted, this is not a repainted chrome camera: genuine black bodies are made with brass, it’s not just a question on painting. Only 8175 Canon VI-T bodies were produced by Canon, among them about 2% were black (less than 200 !). Black paint is surprisingly very well preserved, without brassing on corners. The curtains are only very slightly wrinkled. Only cosmetic faults are a small ding / identation on the top and a slight abrasion due to the strap rings (see pictures). The body has only some slight brassing on the winding lever, on the bottom and on the opening mechanism. The camera works as it should. Lens: Canon 50 mm f/1.8 type 5. Comes without cover.   Je commence tristement à vendre mon énorme collection d’appareils photo télémétriques Canon des années 50-60 pour financer le projet de création d’entreprise de ma fille. Ce très rare appareil en est l'une des plus belles pièces. Ce n'est pas un appareil photo chromé repeint : les boitiers peints en noir était spécialement fabriqués en laiton. Seulement 8175 modèles VI-T furent fabriqués par Canon, dont 2% en noir (moins de 200 !). La peinture noire est étonnamment très bien conservée, sans les habituels usures aux coins. Les seuls défauts esthétiques sont une indentation sur le dessus et de légères usures au niveau des agrafes de sangle (voir photos). Les rideaux métalliques présentent un très léger froissement, sans aucune incidence fonctionnelle. Cet appareil fonctionne comme il se doit. Objectif : Canon 50 mm f/1.8 type 5. Livré sans housse.

BIEN LIRE LA DESCRIPTION READ THE DESCRIPTION Je vends 9 appareils photos ARGENTIQUES (pellicule) Issus de ma collection personnelle. NE FONCTIONNENT PAS TOUS ! VOIR LE DÉTAIL CI DESSOUS N’HÉSITEZ PAS À ME CONTACTER POUR DES RENSEIGNEMENTS OU PHOTOS SUPPLÉMENTAIRES. -1 Canon EOS 3000N: Très bon état, fonctionne parfaitement. A dépoussiérer. -1 Canon EOS 300: Bon état, le plastique du grip est un peu collant. Fonctionne parfaitement. A dépoussiérer. -1 Canon EOS 1000F n: Fonctionne parfaitement, très bon état. A dépoussiérer -1 Canon EOS 5000: Fonctionne parfaitement, très bon état. A dépoussiérer (très bon appareil photo pour débutants, très simple). -1 Canon EOS 700: Ne fonctionne pas, obturateur HS (POUR PIECES) 1 Canon T50: Fonctionne MAIS la trappe de piles est CASSÉE (fonctionne très bien une fois scotchée, fonctionne avec 2 piles AA). A dépoussiérer. Équipé de son objectif Canon FD 50mm 1.8 en état moyen (voir photos.) LA MONTURE EST ENDOMMAGÉE, FONCTIONNE UNIQUEMENT À F1.8. -1 Compact HITAWA: Fonctionne mais je n’ai pas testé l’étanchéité. Un peu de rouille par endroits, A dépoussiérer -1 Compact RÉGULA Sprinty: Fonctionne mais étanchéité non testée. Quelques éléments décoratifs semblent manquer. A dépoussiérer -1 Compact Lomo COSMIC SYMBOL: Fonctionne mais étanchéité non testée. Plastique au bout de la tirette cassé. A dépoussiérer TOUS CES APPAREILS SONT VENDUS COMME SUR LES PHOTOS, SANS PILES NI CAPOTS. ENGLISH DESCRIPTION: CANON EOS 3000N 300 5000 1000FN WORKING, SOME DUST. GRIP IS IN BAD SHAPE ON 300. CANON 700 NOT WORKING DUSTY FOR PARTS CANON T50 WORKING BUT BATTERY CAP IS BROKEN, WORKS WELL WITH DUCT TAPE FD 50MM 1.8 WORKS ONLY AT F1.8 BECAUSE MOUNT IS SEMI BROKEN HITAWA WORKING BUT DIDN’T TEST SEALS SOME RUST ON THE BACK RÉGULA SPRINTY WORKS BUT DIDN’T TEST SEALS, SOME DÉCORATIVE ELEMENTS MISSING ON FRONT LOMO COSMIC SYMBOL WORKS BUT DIDN’T TEST SEALS, PLASTIC IS BROKEN ON AN ÉLÉMENT ON THE BACK EVERYTHING IS SOLD WITHOUT CAPS & WITHOUT BATTERIES. AS ON PICTURES CONTACT ME FOR PICTURES OR RENSEIGNEMENTS

Panasonic LUMIX12-60 mm f/3,5-5,6 Micro 4/3 - without original box because buy in pack with the G9. used once to test. it's sold with an NDvariable GOBE 58 mm filter

Custom Stratocaster Black Gold Anodized Pickguard With Neck/Bridge Blend Control This is a Custom-Made Stratocaster CBS Replica with more sustain & tone control, made with best quality parts. American Ash fully contoured Stratocaster body finished in Black Lacquer, Brushed Satin Finish to match the Anodized pickguard. D Shaped Maple Neck, Large Headstock (CBS style) Rosewood Fretboad 25.5" Standard Scale Length 21 Vintage Frets 7.25' Radius Ultra smooth Tru Oil Vintage Amber Finish Truss Rod Adjustment At The Heel Bone Nut Kluson Deluxe Vintage Tuners Vintage Style Strap Buttons Vintage Wilkinson Tremolo with Solid Steel Block For Extra Sustain. Matched Gold Anodized Pickguard And Spring Cavity Cover. Deluxe strat wiring harness with Neck/Bridge blend control This wiring harness offers a unique and simple way to achieve multiple Strat pickup configurationsand tones without drilling holes for switches and push pull pots. It uses a custom made CTS Blender Pot that acts as a True Bypass in the circuit when turned completely clockwise. A regular pot wouldn’t work for this application because you would still hear the other pickup bleed through. Here’s how it works:  Dial-in your perfect tone  A Standard 5-Way Strat has 1 volume and 2 tones. The Blender wiring has 1 volume, 1 master tone, and a Blender pot. In the neck position you can blend the bridge pickup in as much as you want. In the bridge position you can blend the neck pickup in as much as you want. In positions 2 and 4 you can have all three pickups on at once. No drilling extra holes for toggle switches or push/pull pots, original Stratocaster Design with more tone option. Handwround Custom Vintage Pickups AWG 42 pickup wire, fiber bobbin flatwork, Alnico polepieces, cloth covered push-back wire, wax potted(paraffin and bee`s wax). These will deliver clean and warm bell tones with vintage vibe and great Blues sound with some drive. Resistance (ohms): Neck - 5.9 K, Middle - 5.8 K RW/RP, Bridge - 6.2 K, DCR +/- 5% Magnets: Vintage Style Hand Staggered Alnico 5 Rods (.671".671".710".710".650".671") CTS Pots Orange Drop Capacitor Genuine Oak Grigsby 5-way Selector Switch 1 Master Volume 250k 1 Master Tone 250k 1 No Load Tone Pot 250k (Blend) All fitted to a genuine Fender control shield (helps reduce hum, and eliminates the need for the 3 point wiring to the back of the pots) Total Weight 4.1kg Free New Gigbag included.

Tilta MB-T03 Overview Fair condition, Many cosmetic wears, but Works perfectly.            Very lightweight mattebox, I recommend. - 1 - 2 - 3 - 4 - 5 The Tilta 4 x 4" Carbon Fiber Matte Box features carbon fiber and aluminum construction, making it both lightweight and durable. The matte box will work with lenses up to 100mm in diameter. It features one fixed and one rotating 4 x 4" filter stage and mounts onto lightweight 15mm rods. The matte box incorporates a swing-away design for rapid lens changes. The included removable top and side flags can be precisely set and locked to block stray light from flaring your lens. The included anti-reflection rings protect your image by blocking stray light behind the camera bouncing off filters in the matte box and flaring your image. Lightweight Construction The matte box is made of carbon fiber, with aluminum used for the support structure. This provides a lightweight yet sturdy unit that is appropriate for shooting hand-held or with a stabilizer rig, when every ounce counts. Swing-Away Design The swing-away design allows you to quickly move the matte box out of the way to check or change lenses, without having to remove the matte box from the support rods. This way you don't have to hand off the matte box to someone else, hold it under an arm or between your knees, or hang it under the rods while you work, greatly speeding your workflow and reducing the chance of dropping the matte box or having a filter tray fall out. Top & Side Flags The removable top and side flags provide you additional flare control and attach to the matte box with a lockable hinged assembly. This allows you to precisely set your flags to match the edge of frame for different lenses and lock them in place so that they don't move during the shot. Anti-Reflection Inserts The three included anti-reflection inserts work with lenses with an outer diameter of 72, 80, and 90mm. They provide a light-tight seal so that light from behind the camera cannot leak through where the lens joins the matte box and reflect off filters to flare your image. When you are using lenses with outer diameters other than 72, 80, and 90mm or with lenses that have excessive focus travel it is recommended to use the cloth "nun's knickers" to prevent light leaks. In the Box - Tilta 4 x 4" Carbon Fiber Matte Box - 2 x Filter Tray (4 x 4") - Nuns Knickers - 3 x Anti Reflection Insert

Un cache-poussière de taille `` Super '' Mesure 435 mm x 345 mm (+/- 1 mm) Utilisez ce cache anti-poussière avec les charnières Pioneer PL12 ou Thorens Super d'origine. Peut être utilisé avec les plinthes Thorens 'Super' et TD 147 d'origine de 19/20 mm d'épaisseur. Vous devrez percer les trous nécessaires pour les charnières Pioneer et Thorens Super, car ceux-ci se boulonnent à travers le cache anti-poussière. Conseil supérieur: Un foret spécialement affûté pour percer l'acrylique est recommandé, ou un foret semi-émoussé utilisé à haute vitesse et basse pression pour s'assurer que le foret ne s'accroche pas. Seul le cache anti-poussière est inclus, le support et rien d'autre sur les images sont inclus. A `` Super '' size dust cover WITHOUT CUTOUTS Measures 435 mm x 345 mm (+/- 1 mm) Use this dust cover with the original Pioneer PL12 or Thorens Super hinges. Can be used with original Thorens 'Super' and TD 147 plinths 19/20 mm thick. You will need to drill the necessary holes for the Pioneer and Thorens Super Hinges, as these bolt through the dust cover. Top Tip: A specially sharpened drill bit for drilling acrylic is recommended, or a semi-blunt drill bit used at high speed and low pressure to make sure the bit does not snag.

HITACHI VT-MX828E  video recorder without remote control Intended for PAL, NTSC Specifications: Voltage: 220-240V / 50Hz It is fitted with a European power connection Consumption: max. 17 W Consumption (Standby): less than 3W Audio/Video Sockets Rewind time: 68-78 seconds (tape E-180) Dimensions in cm (W x D x H): 36 x 29 x 9.6 Number of video heads: 4 Number of audio heads (Hi-Fi): 2 Recording / playback time: 3 hours (VN) (cassette E-180) 6 hours (LD) (cassette E-180)             Please check your order upon delivery. If you see that the packaging or the product is damaged, please indicate this on the Delivery Note, take pictures and in the event that the item is damaged, contact me within 48 hours after delivery. The acknowledgment of receipt signed by you and without notification from you that the package is damaged constitutes acceptance of your order in its entirety and in perfect condition. If for any reason you wish to return the item (within the 14-day period), it must be in the same condition in which you received it. You are responsible for the return costs.

Superbe appareil photo reflex pour film 35mm, format 24x36 Nikon F2 équipé de son dos MF 1 pour exposer 250 vues, d'un objectif non AI 50mm f:1.4 et de son moteur MD 2. - Boitier en bel état, présentant des traces d'utilisation normales. La cellule ne fonctionne pas, toutes les vitesses fonctionnent. Le retardateur fonctionne. - Objectif Nikon 50mm f:1,4 en bon état. Pas de rayure, pas de traces de nettoyage. Les bagues de mise au point et diaphragme sont souple et fonctionnent parfaitement. - le dos MF 1 pour 250 vues est en bel état et le moteur fonctionne en faisant du bruit (il faudrait sans doutes faire un graissage, voir la vidéo en copiant le lien suivant: https://youtu.be/Hcdv3vozkmY Matériel non testé avec un film et vendu pour collection. Tout ce qui est dans ce set est visible sur les photos, aucun autre accessoire de disponible. PAS DE VENTE SEPAREE. Expédition pour la France: 35 euro AVEC assurance pour 1000 euro, Livraison par Mondial Relay SANS assurance: 12 euro Remise en main propre possible au marché aux Puces de Saint Ouen les lundi sur rendez vous. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Superb 35mm film SLR camera, 24x36 Nikon F2 format equipped with its MF 1 back to expose 250 frames, a non-AI 50mm f:1.4 lens and its MD 2 motor. - The camera is in good condition, with normal signs of use. The cell does not work, all speeds work. Self-timer works. - Nikon 50mm f:1.4 lens in good condition. No scratches, no traces of cleaning. Focus and aperture rings are soft and work perfectly. - The MF 1 back for 250 frames is in good condition and the motor runs noisily (should probably be greased, see the video by copying the following link: https://youtu.be/Hcdv3vozkmY Translated with www.DeepL.com/Translator (free version) Shipping for China or U.S.A is 90 euro WITH 1000 euro insured with post office. Shipping for UE with post office is 42 euro WITH insurance for 1000 euro. Shipping cost with mondial relay for WITHOUT insurance for Belgium, Luxemburg, Nederland, Portugal, Spain, Germany, Italia and Austria: 22 euro En savoir plus

Superbe appareil photo reflex pour film 35mm, format 24x36 Nikon F2 équipé de son dos MF 1 pour exposer 250 vues, d'un objectif non AI 50mm f:1.4 et de son moteur MD 2. - Boitier en bel état, présentant des traces d'utilisation normales. La cellule ne fonctionne pas, toutes les vitesses fonctionnent. Le retardateur fonctionne. - Objectif Nikon 50mm f:1,4 en bon état. Pas de rayure, pas de traces de nettoyage. Les bagues de mise au point et diaphragme sont souple et fonctionnent parfaitement. - le dos MF 1 pour 250 vues est en bel état et le moteur fonctionne en faisant du bruit (il faudrait sans doutes faire un graissage, voir la vidéo en copiant le lien suivant: https://youtu.be/Hcdv3vozkmY Matériel non testé avec un film et vendu pour collection. Tout ce qui est dans ce set est visible sur les photos, aucun autre accessoire de disponible. PAS DE VENTE SEPAREE. Expédition pour la France: 35 euro AVEC assurance pour 1000 euro, Livraison par Mondial Relay SANS assurance: 12 euro Remise en main propre possible au marché aux Puces de Saint Ouen les lundi sur rendez vous. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Superb 35mm film SLR camera, 24x36 Nikon F2 format equipped with its MF 1 back to expose 250 frames, a non-AI 50mm f:1.4 lens and its MD 2 motor. - The camera is in good condition, with normal signs of use. The cell does not work, all speeds work. Self-timer works. - Nikon 50mm f:1.4 lens in good condition. No scratches, no traces of cleaning. Focus and aperture rings are soft and work perfectly. - The MF 1 back for 250 frames is in good condition and the motor runs noisily (should probably be greased, see the video by copying the following link: https://youtu.be/Hcdv3vozkmY Translated with www.DeepL.com/Translator (free version) Shipping for China or U.S.A is 90 euro WITH 1000 euro insured with post office. Shipping for UE with post office is 42 euro WITH insurance for 1000 euro. Shipping cost with mondial relay for WITHOUT insurance for Belgium, Luxemburg, Nederland, Portugal, Spain, Germany, Italia and Austria: 22 euro En savoir plus Collaboration commerciale.

Wireless Earbud, Bluetooth 5.1 Headphones with CVC 8.0 Noise Cancelling, Deep St   Description Bluetooth V5.1 Technology：Doubc Bluetooth earbud are equipped with a Bluetooth 5.1 technology chip, the connection distance is increased (approximately 15m) and low latency. Take out the Doubc sports earphones from the charging box, they will automatically turn on and pair with each other.,Designed for sport：Doubc wireless earphones use an ergonomic and flexible ear-hook design, so that your running headphones will not fall during strenuous exercise such as running or cycling. With gel flexible silicone ear caps, you can ensure that your earphones fit your ears comfortably and isolate external noise.,Immersive Sound and Noise Reducation: Doubc wireless running headphones use a 10 mm dynamic driver to provide excellent sound quality and strong bass. The built-in cVc8.0 noise reduction microphone provides 3 times clearer call quality than other wireless headsets.,50 Hours Playtime with Charging Case: Built-in 400 mAh battery, with self-developed power saving technology and Type-C fast charging, the wireless headphones can achieve up to 8 hours of playback time after 1.5 hours of charging. With the help of the charging box, it can provide 50 hours of battery life for the sport headset.,IPX7 Waterproof: Doubc I22 running earphones have a IPX7 waterproof rating, which can withstand liquids in any weather, especially when sweating during exercise, without being affected, Its waterproof feature is your best partner during sweaty workouts. About us Payment Nous acceptons les paiements par l'une des méthodes suivantes: PayPal Shipping Nous expédions dans les 1 à 3 jours ouvrables suivant le paiement, généralement plus tôt. Nous utilisons une sélection de services d'expédition locaux. Nous ne livrons pas à des boîtes postales. Livraison Gratuite en France Métropolitaine Via Service postaux / Colissimo / Chronopost / UPS / Colis privé / DHL / royal Mail / amz logistics Free Delivery in Metropolitan France Return Bonjour, pour un retour produitVous devez:Accéder à votre historique et détails de commandes, depuis votre compte client.Sélectionner la commande contenant le produit que vous souhaitez renvoyer.Ajouter une explication dans message.Puis validez "Retour produit" Un message de validation de votre demande, vous sera confirmé ou refusé dans la page "Retour produit" de votre compte, dans les plus brefs délais.N'oubliez pas queLe produit doit être neuf, non porté et dans son état d'origine.L'étiquette comportant la description de la matière ainsi que son code-barres doit être présent sur le produit.Le carton (ou enveloppe) de transport doit être retourné par celui-ci.Votre nom, prénom et adresse ainsi que votre numéro de commande doit figurer dans votre colis.Tout objet retourné fera l'objet d'une inspection par nos soins, nous nous réservons le droit de vous retourner le produit sans le rembourser si celui-ci ne respecte pas ces conditions Copyright © GetProduct.io 2020.

Superbe appareil photo reflex pour film 35mm, format 24x36 Olympus OM 1 equipé d'un dos 250 vues et ses magasins, d'un moteur OM Winder 2, d'un objectif Zuiko 50mm F:1,8 - Le boitier est dans un superbe état. Tout fonctionne parfaitement. Les vitesses et la cellule sont juste. Le dos 250 vues fonctionne lui aussi parfaitement. A noter que le bouchon pour l'engrenage du moteur est toujours là. Quelques poussières dans le viseur, ce qui ne gêne en rien son utilisation. Le moteur fonctionne lui aussi impeccablement, voir la vidéo Youtube: https://www.youtube.com/watch?v=a8D56C2SJwc - Objectif Zuiko 50mm f:1,8 en parfait état. Les lentilles sont parfaites, pas de rayures, pas de traces de nettoyage, pas de moisissure. Les bagues de mise au point et ouvertures sont fluide. Matériel non testé avec un film et vendu pour collection. Tout ce qui est dans ce set est visible sur les photos, aucun autre accessoire de disponible. PAS DE VENTE SEPAREE. Expédition pour la France: 35 euro AVEC assurance pour 1000 euro, Livraison par Mondial Relay SANS assurance: 12 euro Remise en main propre possible au marché aux Puces de Saint Ouen les lundi sur rendez vous. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Superb reflex camera for 35mm film, 24x36 format Olympus OM 1 equipped with a 250 frames back and its 2 magazines, a motor OM Winder 2, a lens Zuiko 50mm F:1,8 - The camera is in superb condition. Everything works perfectly. The speeds and the lightmeter are perfectly right. The 250-shot back also works perfectly. Note that the cap for the motor gear is still there. There's a little bit of dust in the viewfinder, but it doesn't affect its use in any way. The motor also works perfectly, see the Youtube video: https://www.youtube.com/watch?v=a8D56C2SJwc - Zuiko 50mm f:1.8 lens in perfect condition. The glass are perfect, no scratches, no traces of cleaning marks, no fungus. Focus and aperture rings are smooth. Material not tested with film and sold for collection. Everything in this set is shown in the photos, no other accessories available. NO SEPARATE SALE Shipping for China or U.S.A is 90 euro WITH 1000 euro insured with post office. Shipping for UE with post office is 42 euro WITH insurance for 1000 euro. Shipping cost with mondial relay for WITHOUT insurance for Belgium, Luxemburg, Nederland, Portugal, Spain, Germany, Italia and Austria: 22 euro En savoir plus

Superbe appareil photo reflex pour film 35mm, format 24x36 Olympus OM 1 equipé d'un dos 250 vues et ses magasins, d'un moteur OM Winder 2, d'un objectif Zuiko 50mm F:1,8 - Le boitier est dans un superbe état. Tout fonctionne parfaitement. Les vitesses et la cellule sont juste. Le dos 250 vues fonctionne lui aussi parfaitement. A noter que le bouchon pour l'engrenage du moteur est toujours là. Quelques poussières dans le viseur, ce qui ne gêne en rien son utilisation. Le moteur fonctionne lui aussi impeccablement, voir la vidéo Youtube: https://www.youtube.com/watch?v=a8D56C2SJwc - Objectif Zuiko 50mm f:1,8 en parfait état. Les lentilles sont parfaites, pas de rayures, pas de traces de nettoyage, pas de moisissure. Les bagues de mise au point et ouvertures sont fluide. Matériel non testé avec un film et vendu pour collection. Tout ce qui est dans ce set est visible sur les photos, aucun autre accessoire de disponible. PAS DE VENTE SEPAREE. Expédition pour la France: 35 euro AVEC assurance pour 1000 euro, Livraison par Mondial Relay SANS assurance: 12 euro Remise en main propre possible au marché aux Puces de Saint Ouen les lundi sur rendez vous. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Superb reflex camera for 35mm film, 24x36 format Olympus OM 1 equipped with a 250 frames back and its 2 magazines, a motor OM Winder 2, a lens Zuiko 50mm F:1,8 - The camera is in superb condition. Everything works perfectly. The speeds and the lightmeter are perfectly right. The 250-shot back also works perfectly. Note that the cap for the motor gear is still there. There's a little bit of dust in the viewfinder, but it doesn't affect its use in any way. The motor also works perfectly, see the Youtube video: https://www.youtube.com/watch?v=a8D56C2SJwc - Zuiko 50mm f:1.8 lens in perfect condition. The glass are perfect, no scratches, no traces of cleaning marks, no fungus. Focus and aperture rings are smooth. Material not tested with film and sold for collection. Everything in this set is shown in the photos, no other accessories available. NO SEPARATE SALE Shipping for China or U.S.A is 90 euro WITH 1000 euro insured with post office. Shipping for UE with post office is 42 euro WITH insurance for 1000 euro. Shipping cost with mondial relay for WITHOUT insurance for Belgium, Luxemburg, Nederland, Portugal, Spain, Germany, Italia and Austria: 22 euro En savoir plus Collaboration commerciale.

CANON FDn 28mm f/2.8 with Front & Back Caps Condition générale: Proche du neuf et près à l'emploi Overall condition: Near from new and ready to serve Condition cosmétique: None Déclencheur: None Obturateur: None Cellule: None Viseur: None Camera cosmetic condition: None Shutter: None Shutter curtains: None Lightmeter: None Finder: None Condition de l'objectif: Proche du neuf avec quelques infimes traces d'utilisation (voir photos) Lentilles: Propres et claires avec quelques traces de poussières invisible sur le rendu final (voir photos) Diaphragme: Propre et fluide Bagues: Douces et sans points durs Lens cosmetic condition: Near from new with only few signs of use (see pictures) Lens: Clean and clear with only few trace of dust invisible on final picture (see pictures) Aperture: Clean and fluid Focus/Zoom/Aperture Rings: Smooth without hard points Accessoires: Livré avec un bouchon avant et un bouchon arrière original Canon Autres: Compatible avec la monture Sony FE (avec une bague d'adaptation non incluse) Accessories: Delivery with Canon original front cap and back cap Other: Compatible with Sony FE mount (with an adaptation ring not include) Piles et Batterie En raison des restrictions douanières propres à chaque pays, nos produits sont livrés sans batterie. Vous pouvez facilement trouver les modèles de batteries correspondantes via le site www.collection-appareils.fr. Etat L’état du matériel est attesté par la description précise présent dans l’annonce ainsi que les photographies HD qui l’accompagnent. Aucune demande de remboursement ne pourra être acceptée si elle concerne un détail indiqué dans l’annonce ou visible sur les photographies. Envois et Livraisons La livraison est assurée vers la France, l’Europe et le Monde entier via diverses compagnies aux tarifs et fonctionnements différents. Merci de vous référer à la section de l’annonce concernée. Le tarifs comprend l’emballage et l’envoi. Par souci de logistique, nous réalisons nos envois les mercredi et vendredi. Soit au maximum sous 4 jours ouvrés. Frais La vente et la livraison peuvent impliquer divers frais. Les frais de vente et PayPal sont à ma charge, le prix final de la vente n’est donc pas impacté. Cependant, une livraison hors des limites de l’Europe peut impliquer des frais de douanes ou de TVA qui sont à la charge de l’acheteur. Règlement Nous n’acceptons que les règlements par PayPal qui doublent les garanties déjà offertes par. Comme dit plus haut, les frais de la transaction sont à notre charge. Remboursement La garantie de nos produits varie d’un produit à l’autre. Merci de vous référer à la section de l’annonce concernée. Nos produits sont révisés et testés avant l’envoi afin de garantir leur fonctionnement. Cependant, gardez tout de même à l’esprit qu’il s’agit de matériel ancien, bien souvent d’occasion, qui a était remis en état par nos soins. L’utilisation par un public non averti peut entrainer des dysfonctionnements indépendant de notre volonté. Merci de bien vous renseigner avant l’achat. @camerainbeerbox, 2020.