Frame led

Caractéristiques:. 100% tout neuf et de haute qualité Soutenir la prise casque Haut-parleurs intégrés (2 x 1.5W), joue de la musique... Expédition depuis la Chine dans 48h - Livraison sous 10 à 20 jours ouvrés.

Périphérique Périphériques Code EAN: 8160401514932 En-tête / Fabricant: Générique Origine_import: All-in-one Titre: LED BDM Frame -Adaptateurs de sonde BDM cadre ECU rampe pour FGTECH V54 BDM100 CMD100, ensembles complets de programmeur ECU 22 piè

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable   Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 02-avr.-19 à 09:52:29 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable   Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 05-sept.-19 à 22:14:30 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable   Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 04-sept.-19 à 18:24:09 Paris, le vendeur a ajouté les informations suivantes:

540mm LED Backlight Strip Kit For 24" inch Update CCFL LCD Screen To MonitWFFR Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 22-août-19 à 10:39:35 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable   Le 24-déc.-18 à 13:37:18 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 02-avr.-19 à 12:08:11 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 01-avr.-19 à 13:08:56 Paris, le vendeur a ajouté les informations suivantes:

  Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable     Le 09-mai-19 à 05:43:10 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 06-mai-19 à 09:56:09 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 06-mai-19 à 07:54:08 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 06-juin-19 à 13:31:05 Paris, le vendeur a ajouté les informations suivantes:

  Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable     Le 08-juil.-19 à 08:14:13 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable   Le 20-juil.-19 à 16:13:15 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 17-juil.-19 à 09:19:16 Paris, le vendeur a ajouté les informations suivantes:

  Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable     Le 13-juil.-19 à 14:54:17 Paris, le vendeur a ajouté les informations suivantes:

  Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable     Le 13-juil.-19 à 04:59:04 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 19-août-19 à 13:43:11 Paris, le vendeur a ajouté les informations suivantes:

  Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable -Nous acceptons seulement le paiement Paypal. - acheteurs   internationaux - veuillez   noter: a) les taxes et frais d'importation ne sont pas inclus dans le prix de l'article ou les frais d'expédition.  Ces   charges   sont   la   responsabilité   de   l' acheteur. b) Veuillez vérifier auprès du Bureau de douane de votre pays pour déterminer ce que ces coûts supplémentaires seront avant d'enchérir/acheter. * Nous ne pouvons pas expédier aux cases postales ou aux adresses d'APO/FPO Merci!     Le 23-août-19 à 18:22:31 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 03-sept.-19 à 19:13:32 Paris, le vendeur a ajouté les informations suivantes:

Description La marque vous parle Fiche technique Avis clients - Les avis sont publiés et conservés pendant une durée de cinq ans ; - Les avis publiés font l'objet d'une modération depuis la plateforme Avis Vérifiés labellisée AFNOR garantissant - l'authenticité et la transparence des avis publiés (positifs ou négatifs) ; - Les avis ne sont pas modifiables: si un client souhaite modifier son avis, il doit contacter notre partenaire Avis Vérifiés afin de supprimer l'avis existant, et en publier un nouveau"> Questions / Réponses Avec l'introduction d'un dual frame design BitFenix et son Spectre Pro porte les standards du ventilateur PC à un niveau supérieur. Les nouveaux ventilateurs BitFenix Spectre Xtreme propose de nombreuses possibilités pour redéfinir les standards du refroidissement. Voir toute la description Avis Client 3 Type de Tuning Personnalisation du PC Voir toute la fiche technique 18,80 €   € Qu’est-ce que l’éco-participation ? Le prix de cet article inclut l’Eco-participation. L’éco-participation correspond à la contribution financière du consommateur à la collecte, à la réutilisation et au recyclage des équipements électriques et électroniques et des meubles en fin de vie. Son montant est déterminé selon le produit et son type de traitement (pour la DEEE) et selon un barème en fonction du type de meuble et de son poids (pour l’éco-participation sur le mobilier). Pour l’éco-participation sur les équipements électriques et électroniques: Les équipements informatiques: Ordinateurs, imprimantes, claviers… Les équipements de télécommunication: téléphones, fax, répondeurs… Les équipements images et sons: chaînes hifi, caméscopes… Les jouets et équipements de loisirs et sport: consoles de jeux, trains ou voitures électriques… Les sources lumineuses à collecte et recyclage spécifique: lampes à économie d’énergie, néons… L’électroménager: machines à laver, réfrigérateurs, tables de cuisson… Dans le cadre de l’achat d’un appareil électrique et électronique neuf, vous pouvez nous restituer gratuitement votre ancien appareil. Dans un délai de 7 jours suivant le passage de votre commande, connectez-vous à votre espace client, et dans la section "Retourner un produit", sélectionnez "Reprendre mon ancien matériel". Pour l’éco-participation sur le mobilier : Les meubles de salon/séjour/salle à manger, Les meubles d’appoint, Les meubles de chambre à coucher, La literie, Les meubles de bureau, Les meubles de cuisine, Les meubles de salle de bains, Les meubles de jardin, Les sièges, Le mobilier technique, commercial et de collectivité... Participons au recyclage et à la revalorisation des équipements électroniques et électriques et des meubles en fin de vie. En savoir +. Livré chez vous dès le 02/08/2022 Livraison à partir de 3,99€ Détail des modes de livraison × Modes de livraison Mondial Relay - Point Relais Livré entre le 02/08/2022 et 06/08/2022 3,99 € Chonopost Relais Livraison express en relais Pickup le 02/08/2022 4,99 € Colissimo Domicile Livré entre le 03/08/2022 et 06/08/2022 5,99 € Chronopost Domicile Livraison à domicile le 02/08/2022 7,99 € en stock 1 2 Je fonce Ce produit n'est pas disponible, notre équipe fait le maximum pour qu'il le soit bientôt. Inscrivez-vous pour être tenu au courant. Créer une alerte Produit neuf Vendu et expédié par Rue du Commerce 4 Neufs à partir de 18,80 € × Autres offres TOUT NEUF SECONDE VIE 18,80 € Rue du Commerce - Neuf + 3,99 € de frais de port 26,44 € 25,38 € ASDISCOUNT SARL - Neuf Livraison gratuite 29,46 € 27,99 € Monsieur Plus - Neuf + 4,99 € de frais de port 79,00 € DaxedStore.fr - Neuf Livraison gratuite 18,80 € Rue du Commerce - Neuf + 3,99 € de frais de port 26,44 € 25,38 € ASDISCOUNT SARL - Neuf Livraison gratuite 29,46 € 27,99 € Monsieur Plus - Neuf + 4,99 € de frais de port 79,00 € DaxedStore.fr - Neuf Livraison gratuite Il n'y a actuellement aucune offre d'occasion pour ce produit. Garantie 2 Ans Besoin d'aide pour votre achat ? Appelez-nous: du lundi au vendredi de 9h à 20h et le samedi de 9h à 18h (hors jours fériés). 2022-07-30 07:52:08 Publicité Description La marque vous parle Fiche technique Avis clients - Les avis sont publiés et conservés pendant une durée de cinq ans ; - Les avis publiés font l'objet d'une modération depuis la plateforme Avis Vérifiés labellisée AFNOR garantissant - l'authenticité et la transparence des avis publiés (positifs ou négatifs) ; - Les avis ne sont pas modifiables: si un client souhaite modifier son avis, il doit contacter notre partenaire Avis Vérifiés afin de supprimer l'avis existant, et en publier un nouveau"> Questions / Réponses Description - Personnalisation du PC - Bitfenix - Spectre Xtreme 120mm - Noir & LED Blanc Points forts Bitfenix Spectre Xtreme 120mm - Noir & LED Blanc Spectre Xtreme Led Avec l'introduction d'un dual frame design BitFenix et son Spectre Pro porte les standards du ventilateur PC à un niveau supérieur. Les nouveaux ventilateurs BitFenix Spectre Xtreme propose de nombreuses possibilités pour redéfinir les standards du refroidissement. Le Spectre Xtreme vous fournit les meilleures performances et une esthétique originale, avec ses technologies de refroidissement dernier-cri et son design innovant. Les ventilateurs de refroidissement présents dans les systèmes de refroidissement liquide n'ont pas seulement besoin d'un flmux d'air soutenu, mais également d'une pression statique optimisée. Les pales au design inédit du Spectre Xtreme ne sont pas seulement esthétiques, mais permettent aussi au flux d'air de se maintenir à 66 CFM pour un pression statique optimale. Cela fait du ventilateur Spectre Xtreme un choix idéal pour les solutions de refroidissement liquide. Le BitFenix Spectre Xtreme est conçu pour être extrêmement silencieux. Intégrant des roulements Fluid Dynamic de haute qualité permettant de réduire le bruit tout en offrant une efficacité accrue et une durée de vie plus élevée au ventilateur. Incluant le dual frame design Spectre, le frame design du Spectre Xtreme permet une réduction de bruit significative grâce à la construction TPU du frame. En résulte un ventilateur capable d'opérer à différentes vitesses, de 950 RPM à 2000 RPM. Le design agressif du Spectre Xtreme va de pair avec un elarge choix de couleurs et d'options. Le Spectre Xtreme noir ne comprend pas de LEDs installées tandis que le Bleu, le Rouge et le Blanc, en possèdent. Les illuminations du Specte Xtreme peuvent être coupées via le câble de démarrage.

DESCRIPTION: Buy LG PH550 Minibeam 720p LED Projector featuring 720p (1280 x 720) Native Resolution, 30,000 Hour LED Built-In 2W Stereo Speaker. Review LG PH550 IMAGE DISPLAY Display System 3-Chip LCD Native Chip Resolution 1280 x 720 Aspect Ratio Native:16:9 DLP Link 3D Yes Supported 3D Formats Frame Packing (up to 1080p)Side by Side (up to 1080p)Top Bottom (up to 1080p)Frame Sequential (up to 1080p) LENS Focus Manual Throw Distance 2.526 - 10.105' / 77 - 308cm Projection Size 25.00 - 100.00" / 63.5 - 254.0cm FEATURES Built-In Speaker Yes(Stereo) Speaker Power 2W Closed Captioning Yes INPUT/OUTPUT CONNECTORS Inputs/Outputs 1 x USBType-A Female (Input)1 x HDMI with MHL SupportAudio/Video (Input)1 x 1/8" (3.5 mm) MiniAudio/Video (Input)1 x 1/8" (3.5 mm) MiniHeadphone (Output)1 x VGA (DE-15)Video (Input)1 x RF (Input)1 x Power (Input) GENERAL Light Source LED Security Cable Lock SlotKeypad Lock Supported Audio File Types AAC, AC3, CDDA, HE-AAC, LPCM, MP3 Supported Document File Types DOC, DOCX, PDF, PPT, PPTX, TXT, XLS, XLSX Supported Photo File Types BMP, JPEG, PNG Supported Video File Types AVI, DivX, M2TS, M4V, MKV, MOV, MP4, MPEG, MTS, TP, TRP, TS, VOB, WMV Supported Languages EnglishFrenchKoreanSpanish AC Input Power 120 to 240VAC, 50 / 60Hz Temperature Operating32 to 104F (0 to 40C)Humidity: 0 - 80%Storage-4 to 140F (-20 to 60C)Humidity: 0 - 85% Dimensions (W x H x D) 6.9 x 1.9 x 5.0" / 174.0 x 48.0 x 126.0mm With foot and tuner6.9 x 1.7 x 4.6" / 174.0 x 44.0 x 116.0mm Without foot and tuner Weight 1.43lb / 650g PACKAGING INFO Package Weight 3.6 lb Box Dimensions (LxWxH) 9.0 x 7.5 x 7.5" IN THE BOX LG PH550 Minibeam 720p LED Projector Composite Video Adapter Pouch Remote Control with Two AAA Batteries Power Cord AC-DC Adapter Ferrite Core Limited 1-Year Warranty

Périphérique Périphériques Code EAN: 8160401515182 En-tête / Fabricant: Générique Origine_import: All-in-one Titre: BDM Frame -4 pièces/ensemble LED BDM Cadre Sonde Stylos LED BDM Cadre broches Pour Fgtech BDM100 Programmation ECU Outil de Program

Achetez Elo 4243L IntelliTouch Dual Touch - Écran LED au meilleur prix ELO TS PE - OPEN FRAME TOUCH DISPL Elo 4243L IntelliTouch Dual Touch - Écran LED - 42" - cadre ouvert - écran tactile - 1920 x 1080 Ful 4243L LCD OPEN FRAME/FULL HDLED/VGA/HDMI/INTELLITOUCH PLUS IN Stock-Bureau, votre référence en articles de...

Elo 4243L IntelliTouch Dual Touch - Écran LED - 42 ELO TS PE - OPEN FRAME TOUCH DISPL Elo 4243L IntelliTouch Dual Touch - Écran LED - 42" - cadre ouvert - écran tactile - 1920 x 1080 Ful 4243L LCD OPEN FRAME/FULL HDLED/VGA/HDMI/INTELLITOUCH PLUS IN Stock-Bureau, votre référence en articles de...

Lire la suite Ecran PC Iiyama 32"WIDE LCD Open Frame Projective iiyama ProLite TF3239MSC-B1AG. Taille de l'écran: 80 cm (31.5"), Résolution de l'écran: 1920 x 1080 pixels, Type HD: Full HD, Technologie d'affichage: LED, Temps de réponse: 8 ms, Format d'image: 16:9, Angle de vision horizontal: 178°, Angle de vision vertical: 178°. Haut-parleurs intégrés. Montage VESA. Couleur du produit: Noir AFFICHER LA SUITE MASQUER LA SUITE Voir tous les articles Iiyama Voir les autres ecran pc Iiyama Détails Techniques Détails techniques ÉCRAN Pas de pixel: 0,364 x 0,364 Taux de contraste: 3000:1 Angle de vision horizontal: 178 ° Angle de vision vertical: 178 ° Taille visualisable horizontale: 69,8 mm Taille visualisable verticale: 39,3 mm Taille de l'écran: 80 " Luminosité de l'écran: 500 cd/m² Temps de réponse: 8 ms Résolution de l'écran: 1920 x 1080 Fréquence numérique horizontale: 30 - 83 Fréquence de balayage vertical: 50 - 76 Diagonale d'écran (cm): 80 cm Écran tactile: Oui Rétroéclairage à LED: Oui Taux de d'actualisation maximal: 60 Hz Technologie tactile: Plusieurs pressions Technologie écran tactile: Technologie capacitive projetée Type d'écran tactile: Multi-utilisateur Technologie d'affichage: LED Nombre de points de contact simultanés: 12 Format d'image: 16:9 Type HD: Full HD Type de panneau: AMVA3 Forme d'écran: Plat Nombre de couleurs affichées: 16,78 millions de couleurs REPRÉSENTATION / RÉALISATION NVIDIA G-SYNC: Non AMD FreeSync: Non MULTIMÉDIA Microphone intégré: Non Puissance évaluée de RMS: 16 W Haut-parleurs intégrés: Oui Appareil photo intégré: Non Nombre de haut-parleurs: 2 DESIGN Certification: CB, CE, EAC, RoHS, ErP, WEEE, cULus, REACH Couleur du produit: Noir Matériau du boîtier/corps: Métal Code (IP) Internationale Protection: IP54 Épaisseur du verre: 2 mm CONNECTIVITÉ Entrée audio: 1 Sortie audio: 1 Port DVI: Non Nombre de ports VGA (D-Sub): 1 Quantité de ports HDMI: 2 HDMI: Oui HDCP: Oui Quantité d'interface DisplayPorts: 1 RS-232C: Oui Port tactile USB: Oui ERGONOMIE Plug and Play: Oui Voyants: Oui Montage mural: Oui Affichage à l'écran (OSD): Oui Norme VESA: 400 x 200 Affichage multilingue à l'écran: Allemand, Néerlandais, Anglais, Espagnol, Français, Italien, Polonais, Russe Nombre de langues OSD: 8 Montage VESA: Oui PUISSANCE Consommation électrique typique: 60 W Type d'alimentation d'énergie: Secteur Consommation électrique (arrêt): 0,3 W Consommation d'énergie (mode veille): 1,5 W Fréquence d'entrée AC: 50/60 Tension d'entrée AC: 100 - 240 Plage d’efficacité énergétique: A à G Classe d'efficacité énergétique (SDR): G Consommation d'énergie (SDR) pour 1000 heures: 55 kWh CONDITIONS ENVIRONNEMENTALES Température hors fonctionnement: -20 - 60 Température d'opération: 0 - 40 RÉSEAU Ethernet/LAN: Non CONTENU DE L'EMBALLAGE Câbles inclus: Secteur, DisplayPort, HDMI, USB DURABILITÉ Conformité à la durabilité: Oui Certificats de durabilité: CE, REACH, RoHS POIDS ET DIMENSIONS Poids (sans support): 13800 g Hauteur (sans support): 439.9 mm Largeur (sans support): 738.7 mm Profondeur (sans support): 67 mm INFORMATIONS SUR L'EMBALLAGE Poids du paquet: 17,2 g Profondeur du colis: 590 mm Hauteur du colis: 900 mm Largeur du colis: 187 mm AUTRES CARACTÉRISTIQUES Temps moyen entre pannes: 50000 h Nombre de port ethernet LAN (RJ-45): 1 DONNÉES LOGISTIQUES Code du système harmonisé: 85285210 Code EAN 4948570118021 Référence produit 06202707 Référence constructeur TF3239MSC-B1AG Les top ventes En savoir + Ecran PC Samsung SmartMonitor M5 27" 184 € 99 En savoir + Ecran PC Philips E Line 272E1GAJ/00 194 € 90 En savoir + Ecran PC Philips Momentum 27" 27M1C5500VL/00 239 € 99 En savoir + Ecran PC Samsung S24R35AFHU - 24" VA/4ms/FHD/HDMI/VGA/75Hz 124 € 99 En savoir + Ecran PC MSI PRO MP241X 119 € 99 En savoir + Ecran PC Iiyama RedEagle G-Master G2470HSU-B1 169 € 99 Produits associés En savoir + Accessoire écran Targus Privacy Screen 21.5" Widescreen 16:9 23 € 95 En savoir + Commutateur et splitter Splitter HDMI - 2 écrans simultanés 9 € 99 En savoir + Hub Hub 4 ports USB2 5 € 99 En savoir + Nettoyage Airsec Bombe air sec jet puissant 400G net AIRZE 19 € 99 Recherches associées écran PC gamer écran PC ultrawide écran PC 27" écran 4k écran PC incurvé support mural support de bureau écran aoc écran samsung écran msi écran asus écran PC 1 ms

/n /n /n Lire la suite /n /n /n /n /n /n /n Iiyama 32"WIDE LCD Open Frame Projective /n /n iiyama ProLite TF3239MSC-B1AG. Taille de l/'/xc3/xa9cran: 80 cm (31.5"), R/xc3/xa9solution de l/'/xc3/xa9cran: 1920 x 1080 pixels, Type HD: Full HD, Technologie d/'affichage: LED, Temps de r/xc3/xa9ponse: 8 ms, Format d/'image: 16:9, Angle de vision horizontal: 178/xc2/xb0, Angle de vision vertical: 178/xc2/xb0. Haut-parleurs int/xc3/xa9gr/xc3/xa9s. Montage VESA. Couleur du produit: Noir /n /n /n /n /nAFFICHER LA SUITE/n /n /nMASQUER LA SUITE/n /n /n /n /n /n/n/n /n /n /n Voir tous les articles Iiyama /n /n /n Voir les autres ecran pc Iiyama /n /n /n /n/n /n/n /n /n /n /n /n /n /n D/xc3/xa9tails Techniques /n /n D/xc3/xa9tails techniques /n /n /n /n /xc3/x89CRAN Pas de pixel: 0,364 x 0,364 Taux de contraste: 3000:1 Angle de vision horizontal: 178 /xc2/xb0 Angle de vision vertical: 178 /xc2/xb0 Taille visualisable horizontale: 69,8 mm Taille visualisable verticale: 39,3 mm Taille de l/'/xc3/xa9cran: 80 " Luminosit/xc3/xa9 de l/'/xc3/xa9cran: 500 cd/m/xc2/xb2 Temps de r/xc3/xa9ponse: 8 ms R/xc3/xa9solution de l/'/xc3/xa9cran: 1920 x 1080 Fr/xc3/xa9quence num/xc3/xa9rique horizontale: 30 - 83 Fr/xc3/xa9quence de balayage vertical: 50 - 76 Diagonale d/'/xc3/xa9cran (cm): 80 cm /xc3/x89cran tactile: Oui R/xc3/xa9tro/xc3/xa9clairage /xc3/xa0 LED: Oui Taux de d/'actualisation maximal: 60 Hz Technologie tactile: Plusieurs pressions Technologie /xc3/xa9cran tactile: Technologie capacitive projet/xc3/xa9e Type d/'/xc3/xa9cran tactile: Multi-utilisateur Technologie d/'affichage: LED Nombre de points de contact simultan/xc3/xa9s: 12 Format d/'image: 16:9 Type HD: Full HD Type de panneau: AMVA3 Forme d/'/xc3/xa9cran: Plat Nombre de couleurs affich/xc3/xa9es: 16,78 millions de couleurs REPR/xc3/x89SENTATION / R/xc3/x89ALISATION NVIDIA G-SYNC: Non AMD FreeSync: Non MULTIM/xc3/x89DIA Microphone int/xc3/xa9gr/xc3/xa9: Non Puissance /xc3/xa9valu/xc3/xa9e de RMS: 16 W Haut-parleurs int/xc3/xa9gr/xc3/xa9s: Oui Appareil photo int/xc3/xa9gr/xc3/xa9: Non Nombre de haut-parleurs: 2 DESIGN Certification: CB, CE, EAC, RoHS, ErP, WEEE, cULus, REACH Couleur du produit: Noir Mat/xc3/xa9riau du bo/xc3/xaetier/corps: M/xc3/xa9tal Code (IP) Internationale Protection: IP54 /xc3/x89paisseur du verre: 2 mm CONNECTIVIT/xc3/x89 Entr/xc3/xa9e audio: 1 Sortie audio: 1 Port DVI: Non Nombre de ports VGA (D-Sub): 1 Quantit/xc3/xa9 de ports HDMI: 2 HDMI: Oui HDCP: Oui Quantit/xc3/xa9 d/'interface DisplayPorts: 1 RS-232C: Oui Port tactile USB: Oui ERGONOMIE Plug and Play: Oui Voyants: Oui Montage mural: Oui Affichage /xc3/xa0 l/'/xc3/xa9cran (OSD): Oui Norme VESA: 400 x 200 Affichage multilingue /xc3/xa0 l/'/xc3/xa9cran: Allemand, N/xc3/xa9erlandais, Anglais, Espagnol, Fran/xc3/xa7ais, Italien, Polonais, Russe Nombre de langues OSD: 8 Montage VESA: Oui PUISSANCE Consommation /xc3/xa9lectrique typique: 60 W Type d/'alimentation d/'/xc3/xa9nergie: Secteur Consommation /xc3/xa9lectrique (arr/xc3/xaat): 0,3 W Consommation d/'/xc3/xa9nergie (mode veille): 1,5 W Fr/xc3/xa9quence d/'entr/xc3/xa9e AC: 50/60 Tension d/'entr/xc3/xa9e AC: 100 - 240 Plage d/xe2/x80/x99efficacit/xc3/xa9 /xc3/xa9nerg/xc3/xa9tique: A /xc3/xa0 G Classe d/'efficacit/xc3/xa9 /xc3/xa9nerg/xc3/xa9tique (SDR): G Consommation d/'/xc3/xa9nergie (SDR) pour 1000 heures: 55 kWh CONDITIONS ENVIRONNEMENTALES Temp/xc3/xa9rature hors fonctionnement: -20 - 60 Temp/xc3/xa9rature d/'op/xc3/xa9ration: 0 - 40 R/xc3/x89SEAU Ethernet/LAN: Non CONTENU DE L/'EMBALLAGE C/xc3/xa2bles inclus: Secteur, DisplayPort, HDMI, USB DURABILIT/xc3/x89 Conformit/xc3/xa9 /xc3/xa0 la durabilit/xc3/xa9: Oui Certificats de durabilit/xc3/xa9: CE, REACH, RoHS POIDS ET DIMENSIONS Poids (sans support): 13800 g Hauteur (sans support): 439.9 mm Largeur (sans support): 738.7 mm Profondeur (sans support): 67 mm INFORMATIONS SUR L/'EMBALLAGE Poids du paquet: 17,2 g Profondeur du colis: 590 mm Hauteur du colis: 900 mm Largeur du colis: 187 mm AUTRES CARACT/xc3/x89RISTIQUES Temps moyen entre pannes: 50000 h Nombre de port ethernet LAN (RJ-45): 1 DONN/xc3/x89ES LOGISTIQUES Code du syst/xc3/xa8me harmonis/xc3/xa9: 85285210 /n /n /n /n /n /n Code EAN /n 4948570118021 /n /n /n R/xc3/xa9f/xc3/xa9rence produit /n 06202707 /n /n /n R/xc3/xa9f/xc3/xa9rence constructeur /n TF3239MSC-B1AG /n /n /n/n /n /n /n /n Caract/xc3/xa9ristiques principales /n /n /n R/xc3/xa9solution: 1920x1080 Format: 16/9 /n Voir les d/xc3/xa9tails techniques /n /n /n /n /n /n /n/n/n/n /n /n Les top ventes /n /n /n /n /n /n Ecran PC Iiyama G-MASTER GB2770HSU-B5 189 /xe2/x82/xac 90 /n Ecran PC AOC G2 24G2SPAE/BK - 23.8" FHD 165Hz IPS -9% 149 /xe2/x82/xac 90 134 /xe2/x82/xac 99 /n Ecran PC Gigabyte G34WQC A - 34" CURVE UWQHD 144Hz -5% 389 /xe2/x82/xac 90 369 /xe2/x82/xac 90 /n Ecran PC AOC G2 CU34G2X/BK - 34" UWQHD 144Hz -15% 399 /xe2/x82/xac 99 339 /xe2/x82/xac 90 /n Ecran PC Iiyama RedEagle G-Master G2470HSU-B1 144 /xe2/x82/xac 99 /n Ecran PC Iiyama RedEagle G-Master G2770HSU-B1 184 /xe2/x82/xac 90 /n /n /n /n /n /n /n /n /n /n /n /n /n /n/n /n /n/n/n /n Produits associ/xc3/xa9s /n /n /n /n /n /n Accessoire /xc3/xa9cran Nedis Support écran à pincer - 1 écran 15 - 35" 24 /xe2/x82/xac 99 /n Commutateur et splitter Connectland Splitter HDMI 4K - 2 écrans simultanés 29 /xe2/x82/xac 99 /n Hub Hub 4 Ports USB 3.0 14 /xe2/x82/xac 99 /n Nettoyage Airsec Bombe air sec jet puissant 400G net AIRZE 19 /xe2/x82/xac 99 /n /n /n /n /n /n /n /n /n /n /n /n /n /n /n/n/n /n /n /n /n/n/n /n /n /n /n /n /n Livraison suivie et rapide /n /n Retrait 1H, Coursier 2H, Express 24H, Standard, Point Relais ou sur Rendez-vous. /n /n /n /n /n /n /n Paiement s/xc3/xa9curis/xc3/xa9 et modulable /n /n Paiement via CB, PayPal, et /xc3/xa9chelonnement possible jusqu/'/xc3/xa0 24 versements (2x, 3x, 4x, 10x, 12x jusqu/'/xc3/xa0 24x). /n /n /n /n /n /n /n Nos garanties et extensions /n /n 2 ans de garantie inclus, possibilit/xc3/xa9 d/'/xc3/xa9tendre jusqu/'/xc3/xa0 5 ans avec nos extensions. /n /n /n /n /n /n /n R/xc3/xa9tractation sous 30 jours pour No/xc3/xabl /n /n Retour facile et rapide avec remboursement en cas de changement d/'avis/xc2/xa0! /n /n /n/n /n /n Recherches associ/xc3/xa9es /n /n /n /xc3/xa9cran PC gamer /n /xc3/xa9cran PC ultrawide /n /xc3/xa9cran PC 27" /n /xc3/xa9cran 4k /n /xc3/xa9cran PC incurv/xc3/xa9 /n support mural /n support de bureau /n /xc3/xa9cran aoc /n /xc3/xa9cran samsung /n /xc3/xa9cran msi /n /xc3/xa9cran asus /n /xc3/xa9cran PC 1 ms /n /n /n/n /n /n /n /n /n /n /n /n /n /n /n /n /n /n /n /n /n /n/n /n /n

/n /n /n Lire la suite /n /n /n /n /n /n /n Iiyama 32"WIDE LCD Open Frame Projective /n /n iiyama ProLite TF3239MSC-B1AG. Taille de l/'/xc3/xa9cran: 80 cm (31.5"), R/xc3/xa9solution de l/'/xc3/xa9cran: 1920 x 1080 pixels, Type HD: Full HD, Technologie d/'affichage: LED, Temps de r/xc3/xa9ponse: 8 ms, Format d/'image: 16:9, Angle de vision horizontal: 178/xc2/xb0, Angle de vision vertical: 178/xc2/xb0. Haut-parleurs int/xc3/xa9gr/xc3/xa9s. Montage VESA. Couleur du produit: Noir /n /n /n /n /nAFFICHER LA SUITE/n /n /nMASQUER LA SUITE/n /n /n /n /n /n/n/n /n /n /n Voir tous les articles Iiyama /n /n /n Voir les autres ecran pc Iiyama /n /n /n /n/n /n/n /n /n /n /n /n /n /n D/xc3/xa9tails Techniques /n /n D/xc3/xa9tails techniques /n /n /n /n /xc3/x89CRAN Pas de pixel: 0,364 x 0,364 Taux de contraste: 3000:1 Angle de vision horizontal: 178 /xc2/xb0 Angle de vision vertical: 178 /xc2/xb0 Taille visualisable horizontale: 69,8 mm Taille visualisable verticale: 39,3 mm Taille de l/'/xc3/xa9cran: 80 " Luminosit/xc3/xa9 de l/'/xc3/xa9cran: 500 cd/m/xc2/xb2 Temps de r/xc3/xa9ponse: 8 ms R/xc3/xa9solution de l/'/xc3/xa9cran: 1920 x 1080 Fr/xc3/xa9quence num/xc3/xa9rique horizontale: 30 - 83 Fr/xc3/xa9quence de balayage vertical: 50 - 76 Diagonale d/'/xc3/xa9cran (cm): 80 cm /xc3/x89cran tactile: Oui R/xc3/xa9tro/xc3/xa9clairage /xc3/xa0 LED: Oui Taux de d/'actualisation maximal: 60 Hz Technologie tactile: Plusieurs pressions Technologie /xc3/xa9cran tactile: Technologie capacitive projet/xc3/xa9e Type d/'/xc3/xa9cran tactile: Multi-utilisateur Technologie d/'affichage: LED Nombre de points de contact simultan/xc3/xa9s: 12 Format d/'image: 16:9 Type HD: Full HD Type de panneau: AMVA3 Forme d/'/xc3/xa9cran: Plat Nombre de couleurs affich/xc3/xa9es: 16,78 millions de couleurs REPR/xc3/x89SENTATION / R/xc3/x89ALISATION NVIDIA G-SYNC: Non AMD FreeSync: Non MULTIM/xc3/x89DIA Microphone int/xc3/xa9gr/xc3/xa9: Non Puissance /xc3/xa9valu/xc3/xa9e de RMS: 16 W Haut-parleurs int/xc3/xa9gr/xc3/xa9s: Oui Appareil photo int/xc3/xa9gr/xc3/xa9: Non Nombre de haut-parleurs: 2 DESIGN Certification: CB, CE, EAC, RoHS, ErP, WEEE, cULus, REACH Couleur du produit: Noir Mat/xc3/xa9riau du bo/xc3/xaetier/corps: M/xc3/xa9tal Code (IP) Internationale Protection: IP54 /xc3/x89paisseur du verre: 2 mm CONNECTIVIT/xc3/x89 Entr/xc3/xa9e audio: 1 Sortie audio: 1 Port DVI: Non Nombre de ports VGA (D-Sub): 1 Quantit/xc3/xa9 de ports HDMI: 2 HDMI: Oui HDCP: Oui Quantit/xc3/xa9 d/'interface DisplayPorts: 1 RS-232C: Oui Port tactile USB: Oui ERGONOMIE Plug and Play: Oui Voyants: Oui Montage mural: Oui Affichage /xc3/xa0 l/'/xc3/xa9cran (OSD): Oui Norme VESA: 400 x 200 Affichage multilingue /xc3/xa0 l/'/xc3/xa9cran: Allemand, N/xc3/xa9erlandais, Anglais, Espagnol, Fran/xc3/xa7ais, Italien, Polonais, Russe Nombre de langues OSD: 8 Montage VESA: Oui PUISSANCE Consommation /xc3/xa9lectrique typique: 60 W Type d/'alimentation d/'/xc3/xa9nergie: Secteur Consommation /xc3/xa9lectrique (arr/xc3/xaat): 0,3 W Consommation d/'/xc3/xa9nergie (mode veille): 1,5 W Fr/xc3/xa9quence d/'entr/xc3/xa9e AC: 50/60 Tension d/'entr/xc3/xa9e AC: 100 - 240 Plage d/xe2/x80/x99efficacit/xc3/xa9 /xc3/xa9nerg/xc3/xa9tique: A /xc3/xa0 G Classe d/'efficacit/xc3/xa9 /xc3/xa9nerg/xc3/xa9tique (SDR): G Consommation d/'/xc3/xa9nergie (SDR) pour 1000 heures: 55 kWh CONDITIONS ENVIRONNEMENTALES Temp/xc3/xa9rature hors fonctionnement: -20 - 60 Temp/xc3/xa9rature d/'op/xc3/xa9ration: 0 - 40 R/xc3/x89SEAU Ethernet/LAN: Non CONTENU DE L/'EMBALLAGE C/xc3/xa2bles inclus: Secteur, DisplayPort, HDMI, USB DURABILIT/xc3/x89 Conformit/xc3/xa9 /xc3/xa0 la durabilit/xc3/xa9: Oui Certificats de durabilit/xc3/xa9: CE, REACH, RoHS POIDS ET DIMENSIONS Poids (sans support): 13800 g Hauteur (sans support): 439.9 mm Largeur (sans support): 738.7 mm Profondeur (sans support): 67 mm INFORMATIONS SUR L/'EMBALLAGE Poids du paquet: 17,2 g Profondeur du colis: 590 mm Hauteur du colis: 900 mm Largeur du colis: 187 mm AUTRES CARACT/xc3/x89RISTIQUES Temps moyen entre pannes: 50000 h Nombre de port ethernet LAN (RJ-45): 1 DONN/xc3/x89ES LOGISTIQUES Code du syst/xc3/xa8me harmonis/xc3/xa9: 85285210 /n /n /n /n /n /n Code EAN /n 4948570118021 /n /n /n R/xc3/xa9f/xc3/xa9rence produit /n 06202707 /n /n /n R/xc3/xa9f/xc3/xa9rence constructeur /n TF3239MSC-B1AG /n /n /n/n /n /n /n /n Caract/xc3/xa9ristiques principales /n /n /n R/xc3/xa9solution: 1920x1080 Format: 16/9 /n Voir les d/xc3/xa9tails techniques /n /n /n /n /n /n /n/n/n/n /n /n Les top ventes /n /n /n /n /n /n Ecran PC Iiyama G-MASTER GB2770HSU-B5 189 /xe2/x82/xac 90 /n Ecran PC AOC G2 24G2SPAE/BK - 23.8" FHD 165Hz IPS -9% 149 /xe2/x82/xac 90 134 /xe2/x82/xac 99 /n Ecran PC AOC G2 CU34G2X/BK - 34" UWQHD 144Hz -15% 399 /xe2/x82/xac 99 339 /xe2/x82/xac 90 /n Ecran PC Iiyama RedEagle G-Master G2470HSU-B1 144 /xe2/x82/xac 99 /n Ecran PC LG UltraGear 27GP850P-B - 27" QHD Nano-IPS 165Hz 294 /xe2/x82/xac 90 /n Ecran PC Iiyama G-MASTER GB2770QSU-B5 278 /xe2/x82/xac 30 /n /n /n /n /n /n /n /n /n /n /n /n /n /n/n /n /n/n/n /n Produits associ/xc3/xa9s /n /n /n /n /n /n Accessoire /xc3/xa9cran Nedis Support écran à pincer - 1 écran 15 - 35" 24 /xe2/x82/xac 99 /n Commutateur et splitter Connectland Splitter HDMI 4K - 2 écrans simultanés 29 /xe2/x82/xac 99 /n Hub Hub 4 Ports USB 3.0 14 /xe2/x82/xac 99 /n Nettoyage Airsec Bombe air sec jet puissant 400G net AIRZE 19 /xe2/x82/xac 99 /n /n /n /n /n /n /n /n /n /n /n /n /n /n /n/n/n /n /n /n /n/n/n /n /n /n /n /n /n Livraison suivie et rapide /n /n Retrait 1H, Coursier 2H, Express 24H, Standard, Point Relais ou sur Rendez-vous. /n /n /n /n /n /n /n Paiement s/xc3/xa9curis/xc3/xa9 et modulable /n /n Paiement via CB, PayPal, et /xc3/xa9chelonnement possible jusqu/'/xc3/xa0 24 versements (2x, 3x, 4x, 10x, 12x jusqu/'/xc3/xa0 24x). /n /n /n /n /n /n /n Nos garanties et extensions /n /n 2 ans de garantie inclus, possibilit/xc3/xa9 d/'/xc3/xa9tendre jusqu/'/xc3/xa0 5 ans avec nos extensions. /n /n /n /n /n /n /n R/xc3/xa9tractation sous 14 jours /n /n Retour facile et rapide avec remboursement en cas de changement d/'avis/xc2/xa0! /n /n /n/n /n /n Recherches associ/xc3/xa9es /n /n /n /xc3/xa9cran PC gamer /n /xc3/xa9cran PC ultrawide /n /xc3/xa9cran PC 27" /n /xc3/xa9cran 4k /n /xc3/xa9cran PC incurv/xc3/xa9 /n support mural /n support de bureau /n /xc3/xa9cran aoc /n /xc3/xa9cran samsung /n /xc3/xa9cran msi /n /xc3/xa9cran asus /n /xc3/xa9cran PC 1 ms /n /n /n/n /n /n /n /n /n /n /n /n /n /n /n /n /n /n /n /n /n /n/n /n /n

HANNSPREE Moniteur Hanns-G 15.6' OPEN FRAME TOUCH LED 16/9 1920 x 1080 FULLHD HDMI + VGA Noir HO161HTB pas cher PRODUIT NEUF généralement expédié SOUS 3 jours ouvrables en ENVOI SUIVI. Envoi professionnel bien protégé.