Harmonic distortion

1- Crown DC-60 Laboratory power amplifier. (Je vend toute la famille D-75, D150A, DC300A, regardez mes autres annonces) -Power output: 35 watts per channel into 8Ω (stereo), 70 watts into 16Ω (mono) -Frequency response: 5Hz to 20kHz -Total harmonic distortion: 0.05% -Damping factor: 750 -Gain: 26.3 dB -Input sensitivity: 1.75V -Signal to noise ratio: 110dB -Speaker load impedance: 8Ω to 16Ω The DC-300 is a dual channel, high power amplifier for precision amplification of frequencies from DC to 20KHz. The unit features extremely low harmonic and intermodulation distortion, very low noise, high damping factor, quality parts and workmanship.  Je m'en servais en multi-amplification active sur des PR38, du velour. The unit features extremely low harmonic and intermodulation distortion, very low noise, highest “damping factor,” and quality parts and workmanship. The unit may be wired to produce a balanced 25-volt monaural output. The amplifier is fully protected against mismatched and shorted loads by resetting V-I (volt-ampere) limiter having no obnoxious muting or program delays.   Specifications: ·       Frequency Response o   0.1dB 20Hz-20KHz at 1 watt into 8 ohms o   1.2dB 5Hz-100KHz at 1 watt into 8 ohms ·       Output Power o   35 watts per channel minimum RMS (both channels operating) into an 8 ohm load over a bandwidth of 20Hz-20KHz at a rated RMS sum total harmonic distortion of 0.05% of the fundamental output voltage. ·       Output Impedance o   Less than 15 milliohms in series with less than 3 microhenries

Voiture sans fil Bluetooth Transmetteur FM Adaptateur Radio Lecteur MP3 Charg D1 Feature: 1.This product is a car-specific Bluetooth hands-free car charger MP3 player. 2.Using high-performance professional-grade Bluetooth 4.1 chip. 3.You can use your Bluetooth connection to transmit MP3 music from your phone to your car stereo via wireless transmission. 4.Support hands-free calling. 5.Don't need to modify your car, and you can enjoy the music while you're on the road. 6.Bluetooth 4.2+EDR version, support operation of voice prompts, support call number. 7.Intelligent recognition of all types of Android and Apple mobile phones and other devices, USB charging support 2.0 fast charge. USB 1: 2.1A fast charging, USB 2: 1A charging/support USB disk playing. 8.Support FM full-frequency point emission. 9.The music format is MP3/WMA/WAV/APE/FLAC, support automatic power off memory function. 10.Bluetooth stereo A2DP music playback.   Specifications: USB interface: high speed USB2.0 Screen: LED screen Support U disk capacity: ≤32GB (U disk not included) Power supply: DC12V-24V Supported file types: MP3/WMA/FLAC/WAV/APE Operating Current: 45mA DC12V Bit rate: 64-320 kbps FM frequency range: 87.5-107MHz (100KHz stepping) Signal to noise ratio: 85dB (FM: 65dB) Harmonic distortion: Working temperature: 0°C-60°C Launch distance: ≤5 meters Item net weight:30g   Package Included: 1 * USB Phone Charger Handsfree Car kit Item Specifics Connectors: Bluetooth Wireless Color: Black Type: FM Transmitter Screen: LED screen Power supply: DC12V-24V Features: Handsfree Calling Operating Current: 45mA DC12V Bit rate: 64-320 kbps MPN: Does Not Apply FM frequency range: 87.5-107MHz Signal to noise ratio: 85dB (FM: 65dB) Harmonic distortion: Working temperature: 0 Launch distance: Brand: Vtin Payment Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. Shipping Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Terms of Sale Si vous n'êtes pas satisfait de votre achat, contactez-nous sans hésiter. Les articles peuvent être retournés dans 30 jours en état inutilisé, nous effectuerons un échange et un remboursement une fois que nous aurons reçu l'objet. Gardez les étiquettes entières et les éléments propres sans saveur, si non nous n'accepterons pas le retour. About US Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Feature: 1.This product is a car-specific Bluetooth hands-free car charger MP3 player. 2.Using high-performance professional-grade Bluetooth 4.1 chip. 3.You can use your Bluetooth connection to transmit MP3 music from your phone to your car stereo via wireless transmission. 4.Support hands-free calling. 5.Don't need to modify your car, and you can enjoy the music while you're on the road. 6.Bluetooth 4.2+EDR version, support operation of voice prompts, support call number. 7.Intelligent recognition of all types of Android and Apple mobile phones and other devices, USB charging support 2.0 fast charge. USB 1: 2.1A fast charging, USB 2: 1A charging/support USB disk playing. 8.Support FM full-frequency point emission. 9.The music format is MP3/WMA/WAV/APE/FLAC, support automatic power off memory function. 10.Bluetooth stereo A2DP music playback.   Specifications: USB interface: high speed USB2.0 Screen: LED screen Support U disk capacity: ≤32GB (U disk not included) Power supply: DC12V-24V Supported file types: MP3/WMA/FLAC/WAV/APE Operating Current: 45mA DC12V Bit rate: 64-320 kbps FM frequency range: 87.5-107MHz (100KHz stepping) Signal to noise ratio: 85dB (FM: 65dB) Harmonic distortion: Working temperature: 0°C-60°C Launch distance: ≤5 meters Item net weight:30g   Package Included: 1 * USB Phone Charger Handsfree Car kit Item Specifics Connectors: Bluetooth Wireless Color: Black Type: FM Transmitter Screen: LED screen Power supply: DC12V-24V Features: Handsfree Calling Operating Current: 45mA DC12V Bit rate: 64-320 kbps MPN: Does Not Apply FM frequency range: 87.5-107MHz Signal to noise ratio: 85dB (FM: 65dB) Harmonic distortion: Working temperature: 0 Launch distance: Brand: Vtin PAYMENT Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. SHIPPING Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Terms of Sale Si vous n'êtes pas satisfait de votre achat, contactez-nous sans hésiter. Les articles peuvent être retournés dans 30 jours en état inutilisé, nous effectuerons un échange et un remboursement une fois que nous aurons reçu l'objet. Gardez les étiquettes entières et les éléments propres sans saveur, si non nous n'accepterons pas le retour. ABOUT US Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Le 08-déc.-20 à 09:31:02 Paris, le vendeur a ajouté les informations suivantes:

Voiture sans fil Bluetooth Transmetteur FM Adaptateur Radio Lecteur MP3 Charg DE Feature: 1.This product is a car-specific Bluetooth hands-free car charger MP3 player. 2.Using high-performance professional-grade Bluetooth 4.1 chip. 3.You can use your Bluetooth connection to transmit MP3 music from your phone to your car stereo via wireless transmission. 4.Support hands-free calling. 5.Don't need to modify your car, and you can enjoy the music while you're on the road. 6.Bluetooth 4.2+EDR version, support operation of voice prompts, support call number. 7.Intelligent recognition of all types of Android and Apple mobile phones and other devices, USB charging support 2.0 fast charge. USB 1: 2.1A fast charging, USB 2: 1A charging/support USB disk playing. 8.Support FM full-frequency point emission. 9.The music format is MP3/WMA/WAV/APE/FLAC, support automatic power off memory function. 10.Bluetooth stereo A2DP music playback.   Specifications: USB interface: high speed USB2.0 Screen: LED screen Support U disk capacity: ≤32GB (U disk not included) Power supply: DC12V-24V Supported file types: MP3/WMA/FLAC/WAV/APE Operating Current: 45mA DC12V Bit rate: 64-320 kbps FM frequency range: 87.5-107MHz (100KHz stepping) Signal to noise ratio: 85dB (FM: 65dB) Harmonic distortion: Working temperature: 0°C-60°C Launch distance: ≤5 meters Item net weight:30g   Package Included: 1 * USB Phone Charger Handsfree Car kit Item Specifics Connectors: Bluetooth Wireless Color: Black Type: FM Transmitter Screen: LED screen Power supply: DC12V-24V Features: Handsfree Calling Operating Current: 45mA DC12V Bit rate: 64-320 kbps MPN: Does Not Apply FM frequency range: 87.5-107MHz Signal to noise ratio: 85dB (FM: 65dB) Harmonic distortion: Working temperature: 0 Launch distance: Brand: Vtin Moyen de Paiement Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. Livraison Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Politique de Retour Si vous n'êtes pas satisfait de votre achat, contactez-nous sans hésiter. Les articles peuvent être retournés dans 30 jours en état inutilisé, nous effectuerons un échange et un remboursement une fois que nous aurons reçu l'objet. Gardez les étiquettes entières et les éléments propres sans saveur, si non nous n'accepterons pas le retour. Sur nous Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Feature: 1.This product is a car-specific Bluetooth hands-free car charger MP3 player. 2.Using high-performance professional-grade Bluetooth 4.1 chip. 3.You can use your Bluetooth connection to transmit MP3 music from your phone to your car stereo via wireless transmission. 4.Support hands-free calling. 5.Don't need to modify your car, and you can enjoy the music while you're on the road. 6.Bluetooth 4.2+EDR version, support operation of voice prompts, support call number. 7.Intelligent recognition of all types of Android and Apple mobile phones and other devices, USB charging support 2.0 fast charge. USB 1: 2.1A fast charging, USB 2: 1A charging/support USB disk playing. 8.Support FM full-frequency point emission. 9.The music format is MP3/WMA/WAV/APE/FLAC, support automatic power off memory function. 10.Bluetooth stereo A2DP music playback.   Specifications: USB interface: high speed USB2.0 Screen: LED screen Support U disk capacity: ≤32GB (U disk not included) Power supply: DC12V-24V Supported file types: MP3/WMA/FLAC/WAV/APE Operating Current: 45mA DC12V Bit rate: 64-320 kbps FM frequency range: 87.5-107MHz (100KHz stepping) Signal to noise ratio: 85dB (FM: 65dB) Harmonic distortion: Working temperature: 0°C-60°C Launch distance: ≤5 meters Item net weight:30g   Package Included: 1 * USB Phone Charger Handsfree Car kit Item Specifics Connectors: Bluetooth Wireless Color: Black Type: FM Transmitter Screen: LED screen Power supply: DC12V-24V Features: Handsfree Calling Operating Current: 45mA DC12V Bit rate: 64-320 kbps MPN: Does Not Apply FM frequency range: 87.5-107MHz Signal to noise ratio: 85dB (FM: 65dB) Harmonic distortion: Working temperature: 0 Launch distance: Brand: Vtin PAYMENT Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. SHIPPING Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. ABOUT US Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Le 27-mai-21 à 11:13:06 Paris, le vendeur a ajouté les informations suivantes:

LUXMAN L-5 An incredible Stereo Integrated Amplifier VERY GOOD CONDITION  Des traces d'usage apparaissent, mais peu, voir photos et vidéo:  Traces of use appear, but few, please see photos and video:  https://www.youtube.com/watch?v=7E-4kfPXhz0&feature=youtu.be REVISE / SERVICED  Nettoyé / Cleaned in out Potentiomètres et contacts désoxydés / Potentiometers and contacts have been deoxidized Luxman K-5 Stereo Cassette Deck (1979-81) VERY GOOD CONDITION  Des traces d'usage peuvent apparaître, mais très peu, voir photos et vidéo:  Traces of use may appear, but very few, please see photos and video:  https://www.youtube.com/watch?v=7E-4kfPXhz0&feature=youtu.be REVISE / SERVICED  Nettoyé / Cleaned in out Potentiomètres et contacts désoxydés / Potentiometers and contacts have been deoxidized Courroies neuves / New belts Vitesse régulée à 1000Hz / Regulated speed 1000 Hz Lampes neuves / New lights Luxman T-4 Accutouch Closed Loop Locked AM/FM Tuner (1978-81) VERY GOOD CONDITION  Des traces d'usage peuvent apparaître, mais très peu, voir photos et vidéo:  Traces of use may appear, but very few, please see photos and video:  REVISE / SERVICED  Nettoyé / Cleaned in out Potentiomètres et contacts désoxydés / Potentiometers and contacts have been deoxidized Câble d'alimentation intégré / Power cable included Lampe neuve à la couleur d'origine / New light with the original color RCA inclus / RCA included Plusieurs heures de tests / several hours of tests   LIVRAISON / DELIVERY  A domicile en emballage sécurisé et assuré  Home delivery in a safe and insured packaging  Wolrdwide Delivery / Colissimo, UPS, Chronopost   Spécifications HiFi Engine : The Luxman L-5 is a slim precision-look amplifier featuring DC configuration in the output stage. A mighty output is attained - 60W minimum continuous per channel, both channels driven into 8ohm  loads, from 20Hz-20,000Hz with total harmonic distortion of no more than 0.2% Power output: 60 watts per channel into 8Ω (stereo). Frequency response: 10Hz to 100kHz. Total harmonic distortion: 0.03% Damping factor: 80. Input sensitivity: 2.5mV (MM), 150mV (line). Signal to noise ratio: 92dB (MM),  100dB (line). Channel separation: 60dB (MM), 78dB (line) Dimensions: 438 x 289 x 105mm. Weight: 9.5kg Spécifications HiFi Engine : Type: 2-head, single compact cassette deck. Track System: 4-track, 2-channel stereo. Tape Speed: 4.75 cm/s Heads: 1 x record/playback, 1 x erase. Tape Type: type I, CrO2, Metal. Noise Reduction: B Frequency Response: 30Hz to 20kHz  (Metal tape). Signal to Noise Ratio: 65dB  (dolby B). Wow and Flutter: 0.06% Total Harmonic Distortion: 0.7%. Input: 100mV (line), 0.45mV (mic). Output: 0.58V (line) Dimensions: 438 x 264 x 150mm. Weight: 5.8kg Spécifications HiFi Engine : The Luxman T-4 features LUX's exclusive CLL circuit offering perfect accuracy and unconditional stability in FM tuning,  which interacts with the ACCUTOUCH system to provide a mechanical lock on the tuning knob when the station is  precisely tuned in. Type: Mono/Stereo Tuner. Tuning Bands: FM, MW. Tuning Scale: Analogue. FM Tuning Range: 87.5 to 108 MHz. Sensitivity: 1.8uV (FM), 250uV (MW). Signal to Noise Ratio: 75dB (FM), 50dB (MW). Distortion: 0.5% (FM), 0.6% (MW Frequency response: 30Hz to 15kHz (FM). Output: 1000mV (FM), 300mV (MW) Dimensions: 438 x 346 x 84mm. Weight: 6.5kg ADC - AKG - AUDIO-TECHNICA - DENON - DYNAVOX - EMPIRE - GARRARD - JELCO - LENCO - MICRO SEIKI - ORTOFON - PICKERING - REGA - SHURE - SME - STANTON - THORENS  3A - AUDAX - B&W - BOSE - CABASSE - CELESTION - CERWIN WEGA - DITTON -  ELIPSON - FRANCE ACOUSTIQUE - HRC - INFINITY - JAMO - JBL - JENSEN - JM REYNAUD - KEF - KLIPSCH - LANSING - LEAK - LES - MAGNAT - MARTIN - MERCURIALE -  MISSION -ROGERS - SIARE - TAD

FULLY SERVICED LUXMAN L-5 amplifier + T-4 accutouch tuner + K-5 Cassette Deck LUXMAN L-5 Stereo Integrated Amplifier VERY GOOD CONDITION   Des traces d'usage apparaissent, mais peu, voir photos et vidéo:   Traces of use appear, but few, please see photos and video:   https://www.youtube.com/watch?v=7E-4kfPXhz0&feature=youtu.be REVISE / SERVICED   Nettoyé / Cleaned in out Potentiomètres et contacts désoxydés / Potentiometers and contacts have been deoxidized   Luxman K-5 Stereo Cassette Deck (1979-81) VERY   GOOD CONDITION   Des traces d'usage peuvent apparaître, mais très peu, voir photos et vidéo:   Traces of use   may appear, but very few, please see photos and video:   https://www.youtube.com/watch?v=7E-4kfPXhz0&feature=youtu.be REVISE / SERVICED   Nettoyé / Cleaned in out Potentiomètres et contacts désoxydés / Potentiometers and contacts have been deoxidized Courroies neuves / New belts Vitesse régulée à 1000Hz / Regulated speed 1000 Hz Lampes neuves / New lights   Luxman T-4 Accutouch Closed Loop Locked AM/FM Tuner (1978-81) VERY   GOOD CONDITION   Des traces d'usage peuvent apparaître, mais très peu, voir photos et vidéo:   Traces of use may appear, but very few, please see photos and video:   REVISE / SERVICED   Nettoyé / Cleaned in out Potentiomètres et contacts désoxydés / Potentiometers and contacts have been deoxidized Câble d'alimentation intégré / Power cable included Lampe neuve à la couleur d'origine / New light with the original color RCA inclus / RCA included Plusieurs heures de tests / several hours of tests   LIVRAISON / DELIVERY   A domicile en emballage sécurisé et assuré   Home delivery in a safe and insured packaging   Wolrdwide Delivery / Colissimo, UPS, Chronopost WORLWIDE DELIVERY Spanish's and Italian's islands, please contact for shipping cost     Spécifications HiFi Engine : The Luxman L-5 is a slim precision-look amplifier featuring DC configuration in the output stage. A mighty output is attained - 60W minimum continuous per channel, both channels driven into 8ohm  loads, from 20Hz-20,000Hz with total harmonic distortion of no more than 0.2% Power output: 60 watts per channel into 8Ω (stereo). Frequency response: 10Hz to 100kHz. Total harmonic distortion: 0.03% Damping factor: 80. Input sensitivity: 2.5mV (MM), 150mV (line). Signal to noise ratio: 92dB (MM),  100dB (line). Channel separation: 60dB (MM), 78dB (line) Dimensions: 438 x 289 x 105mm. Weight: 9.5kg Spécifications HiFi Engine : Type: 2-head, single compact cassette deck. Track System: 4-track, 2-channel stereo. Tape Speed: 4.75 cm/s Heads: 1 x record/playback, 1 x erase. Tape Type: type I, CrO2, Metal. Noise Reduction: B Frequency Response: 30Hz to 20kHz   (Metal tape). Signal to Noise Ratio: 65dB   (dolby B). Wow and Flutter: 0.06% Total Harmonic Distortion: 0.7%. Input: 100mV (line), 0.45mV (mic).   Output: 0.58V (line) Dimensions: 438 x 264 x 150mm. Weight: 5.8kg   Spécifications HiFi Engine : The Luxman T-4 features LUX's exclusive CLL circuit offering perfect accuracy and unconditional stability in FM tuning,  which interacts with the ACCUTOUCH system to provide a mechanical lock on the tuning knob when the station is  precisely tuned in. Type: Mono/Stereo Tuner. Tuning Bands: FM, MW. Tuning Scale: Analogue. FM Tuning Range: 87.5 to 108 MHz. Sensitivity: 1.8uV (FM), 250uV (MW). Signal to Noise Ratio: 75dB (FM), 50dB (MW). Distortion: 0.5% (FM), 0.6% (MW Frequency response: 30Hz to 15kHz (FM). Output: 1000mV (FM), 300mV (MW) Dimensions: 438 x 346 x 84mm. Weight: 6.5kg ADC - AKG - AUDIO-TECHNICA - DENON - DYNAVOX - EMPIRE - GARRARD - JELCO - LENCO - MICRO SEIKI - ORTOFON - PICKERING - REGA - SHURE - SME - STANTON - THORENS   3A - AUDAX - B&W - BOSE - CABASSE - CELESTION - CERWIN WEGA - DITTON -  ELIPSON - FRANCE ACOUSTIQUE - HRC - INFINITY - JAMO - JBL - JENSEN - JM REYNAUD - KEF - KLIPSCH - LANSING - LEAK - LES - MAGNAT - MARTIN - MERCURIALE -  MISSION -ROGERS - SIARE - TAD (PIONEER) - TANNOY - TRIANGLE - ULTRALINEAR - WHARFEDALE   3M - AGFA - AMPEX - BASF - FUJI - MAXELL - MEMOREX - NAGRA - NAKAMICHI - SCOTCH - SONY - TANDBERG - TDK A&R CAMBRIDGE - ACCUPHASE - AIWA - AKAI - ALPINE/ALPAGE - AMSTRAD - ARCAM - AUDIO RESEARCH - AUREX (TOSHIBA) - BANG & OLUFSEN (B&O) - BARTHE - BENYTONE - BLAUPUNKT - BOSE - BRANDT - BRAUN - BRYSTON - BST - CAMBRIDGE AUDIO - CARVER - CONTINENTAL EDISON - CREEK - CYBERNET - DAVID HAFLER - DENON - DUAL - DYNACO - ELECTROCOMPANIET - EMB - ESART - FERGUSON - FISHER - GRAETZ - GRUNDIG - H.H.SCOTT - HARMAN/KARDON - HITACHI - ITT  - JVC - KENWOOD - KRELL - LINN - LOEWE -  LUXMAN -   MARANTZ  - MARK LEVINSON - McINTOSH - MERIDIAN - MICROMEGA - MITSUBISHI - NAD - NAIM - NAKAMICHI - NEC - NIKKO - NYTECH - ONKYO - OPTONICA  (SHARP) - PALLADIUM - PANASONIC - PATHE MARCONI - PHASE LINEAR - PHILIPS - PHONOPHONE - PIONEER - PROTON - QUAD   - RADIOLA - REVOX - ROTEL - SABA - SAE - SAMSUNG - SANSUI - SANYO - SHARP - SCHAUB-LORENZ - SCHNEIDER - SCIENTELEC - SETTON -  SHERWOOD - SIEMENS - SONY - SOUNDCRAFTSMEN - STAX - STUDER (REVOX) - SUGDEN - SYMPHONIE - TASCAM (TEAC) - TEAC -  TECHNICS - TELEFUNKEN - TELETON - TENSAI (AKAI) - THOMSON - THRESHOLD - TOSHIBA - UHER - UNIVERSUM - WALTHAM - WEGA - YAMAHA      

Vend Yamaha CA-800 II, il sort de révision, facture fournie. Excellent état cosmétique. Il est vendu avec son tuner CT-400 en très bon état également. Envoi Mondial Relay 25€ avec assurance. International Shipping on demand. NS Series Stereo Integrated Amplifier w/Manual Class A Amplifier Specifications Power output: 50 watts per channel into 8Ω (stereo) Class B Power output: 10 watts per channel into 8 Ohms (stereo) Class A w/0.02% THD at 1 watt Frequency response: 10Hz to 50kHz Total harmonic distortion: 0.1% at rated power Total harmonic distortion: 0.04% at 1 watt Damping factor: 70 Input sensitivity: 2.5mV (mic), 3mV (MM), 120mV (line) Signal to noise ratio: 70dB (mic), 80dB (MM), 90dB (line) Channel separation: 50dB (MM), 50dB (line) Output: 120mV (line), 0.775V (Pre out) Speaker load impedance: 4Ω to 16Ω Semiconductors: 2 x FET, 49 x transistors, 12 x diodes, 4 x zener diodes Dimensions: 436 x 144 x 323mm Weight: 13.5kg Tuner FM Tuner Section Usable Sensitivity: 2,0 µV Image Response Ratio (84 MHz): 55 dB IF Response Ratio (84 MHz): 75 dB Spurious Response Ratio (84 MHz): 75 dB Capture Ratio: 1,5 dB Effective Selectivity (IHF): 75 dB Signal-to-Noise Ratio: Mono: 70 dB Stereo: 66 dB Total Harmonic Distortion (400 Hz): Mono: 0,3% Stereo: 0,5% Stereo Separation (400 Hz): 40 dB Frequency Response: 20 Hz to 14 kHz, +1,5 dB, -3 dB Subcarrier Suppression Ratio: 40 dB AM Tuner Section Usable Sensitivity (IHF, bar antenna): 52 dB/m Selectivity (1000 kHz): 25 dB General Section Power Supply: AC 100-120V, 220-240V, 50/60 Hz Power Consumption: 2,6 W (100V) Dimensions (W x H x D): 17 x 12 x 6 in Weight: 11 lbs.

Ampli-tuner Home Cinema Onkyo TX-SV525R RDS Dolby Surround 5.1 en excellent état avec sa télécommande d'origine. Audio Amplifier Output Details 60 Watt - 8 Ohm - at 1 kHz - Total Harmonic Distortion 0.08% - 2 channels (front) 60 Watt - 8 Ohm - at 1 kHz - Total Harmonic Distortion 0.08% - 1 channels (center) 20 Watt - 8 Ohm - at 1 kHz - Total Harmonic Distortion 0.8% - 2 channels (rear) Response Bandwidth: 20 - 30000 Hz Signal-To-Noise Ratio: 100 dB Audio System Sound Output Mode: Surround Sound Built-in Decoders: Dolby Pro Logic Surround System Class: 5.1 channel Digital Sound Processor (DSP): Yes DSP Presets: Arena, Hall, Live, Theater Additional Features: multi-room audio output Bass Control: Yes Treble Control: Yes Built-in Clock: sleep timer Tuner Tuner Type: digital Tuner Bands: AM/FM Preset Station Qty: 30 Connections Type: audio line-in, audio line-out, composite video/audio input, headphones, monitor output, phono input, remote control, subwoofer output Connector Type: RCA, RCA x 2, RCA x 3, phone stereo 6.3 mm Headphone Jack: Yes

Amplificateur PA-W04 Power output: 48 watts per channel into 8Ω (stereo) Frequency response: 1Hz to 100kHz Total harmonic distortion: 0.008% Damping factor: 100 Input sensitivity: 1V Signal to noise ratio: 115dB Speaker load impedance: 4Ω to 16Ω Semiconductors: 27 x transistors, 47 x diodes, 2 x FET, 7 x IC Dimensions: 440 x 78 x 373mm Weight: 6.7kg Pré Amplificateur PR-A04 Frequency response: 5Hz to 100kHz Total harmonic distortion: 0.005% Input sensitivity: 0.8mV (MC), 3mV (MM), 150mV (DIN), 150mV (line) Signal to noise ratio: 75dB (MC), 82dB (MM), 80dB (DIN), 102dB (line) Channel separation: 70dB (line) Output: 150mV (line), 30mV (DIN), 1V (Pre out) Semiconductors: 16 x transistors, 15 x diodes, 2 x FET, 6 x IC Dimensions: 440 x 78 x 313mm Weight: 6.1kg Lecteur de cassettes GX-M10 The Akai GX-M10 is a stereo, compact cassette recorder with two-head system. The unit is compatible with LN-, LH-, Cr02- and Metal tapes and has Dolby noise suppression as a result. Type: 2 heads, single compact tape deck. Track system: 4-track, 2-channel stereo. Tape speed: 4.76 cm / s Heads: 1x record/playback, 1x erase. Motor: electronically controlled DC. Tape Type: type I, CrO2, Metal. Noise suppression: B Frequency range: 30Hz to 19kHz (metal tape) Signal / noise ratio: 71dB (dolby B) Wow and Flutter: 0.04% Total harmonic distortion: 0.6% Input: 70mV (line), 0.3mV (mic) Output: 0.41V (line). Size: 440 x 143 x 250 mm. Weight: 6kg Pas de livraison, à venir retirer sur place.

Yamaha Matrix Processeur MTX5-D - Matrice Processeur - Excellent état Série MTX - Caractéristiques techniques - Processeurs - Audio professionnel - Produits - Yamaha - France MTX5-D (yamaha.com)   MTX5-D Mixing capability Mixing channels Mixing Channel: 16 Mono + 3 Stereo + 2 Effect Return + 8 Direct-in to Matrix Input channel functions Mono CH: 3-band PEQ, Comp, Gate, Auto Gain Control, Feedback suppressor (available in ch 1-8) Output channel functions Room Delay, Room EQ, Speaker Processor, X-Over (1way,2way), Delay, 6-band PEQ, Limiter I/O Phantom power +48V Internal processing Priority Ducking, Ambient Noise Compensator Sampling frequency rate Internal 48kHz/ 44.1kHz Signal delay Less than 3.0ms (AD-DA @48kHz) Total harmonic distortion Less than 0.05% (+4dBu, Gain:-6dB), Less than 0.1% (+4dBu, Gain:+66dB) Frequency response 20Hz to 20kHz, +0.5dB, -1.5dB Dynamic range 107dB (Gain:-6dB) Hum & noise level Equivalent input noise -60dBu (Gain ： +66dB), -83dBu (Gain ： -6dB) Crosstalk -100dB Heat dissipation 55.9kcal/h max Power requirements AC100V-240V 50Hz/60Hz Power consumption 65W Dimensions W 480mm (18.9") H 88mm (3.4") D 351mm (13.9") Net weight 6.3kg (13.9lbs) Others Memory bank: PRESET 50 ·          * Total harmonic distortion is measured with a 18dB/Oct fi lter @80kHz. ·          * Hum & noise level is measured with a 6dB/oct fi lter @12.7kHz;equivalent to 20kHz fi lter with infi nite dB/Oct attenuation. AnalogInput Specifications Input terminal GAIN Actual load impedance For use with nominal Input Level Connector Nominal Max. before clip INPUT 1-8 +66dB 10kΩ 50-600Ω Mics & 600Ω Lines -62dBu -42dBu Euroblock -6dB +10dBu +30dBu ST IN 1,2 - 10kΩ 600Ω Lines -10dBV +10dBV RCA Pin Jack AnalogOutput Specifications Output terminal Actual Source impedance For use with nominal Output Level Connector Nominal Max. before clip OUTPUT 1-8 75Ω 10kΩ Lines +4dBu +24dBu Euroblock DigitalInput and Output Specifications Terminal Format Level IN/OUT Connector Note YDIF In YDIF RS-422 16IN RJ45 YDIF Out YDIF RS-422 16OUT RJ45 Primary Dante 1000BASE-T 16IN/16OUT RJ45 MTX5-D Only Secondary Dante 1000BASE-T 16IN/16OUT RJ45 MTX5-D Only ControlI/O Specifications Terminal Level Connector MTX5-D GPI 16 IN / 8 OUT IN 1-15ch: 0-5V 16ch: 2.5-24V: High, 2.5V or less, Allowable input +24V Euroblock OUT Open Collector +V DC5V MTX5-D REMOTE RS-232C (BAUD RATE: 38.4kbps or 115.2kbps) D-sub 9pin (Male) DCP - RJ-45 Exi8/Exo8 Specifications   EXi8 EXo8 Sampling frequency 48kHz/44.1kH Signal delay Less than 2.5ms Total harmonic distortion Less than 0.05% (+4dBu, Gain:-6dB); less than 0.1% (+4dBu, Gain:+66dB) Frequency response 20Hz to 20kHz, -1.5dB min, 0dB typ., +0.5dB max Dynamic range 107dB (Gain:-6dB) Equivalent input noise (EIN) -126dBu (Gain: +66dB) Phantom power +48V (per channel; individually settable) Crosstalk -100dB (@1kHz) Heat dissipation (per hour) 21.5 kcal max. Power supply voltage 100V 50/60Hz Power consumption 25 W max. Dimensions (W x H x D) 480(W) x 44(H) x 351(D)mm, 1U 480(W) x 44(H) x 351(D)mm, 1U Included items Power cord, Euroblock plugs (3-pin, tabbed) x8 EXi8Analog Input Specifications Input terminal GAIN Actual load impedance For use with nominal Input Level Connector Nominal Max. before clip INPUT 1-8 +66dB 10kΩ 50-600Ω Mics & 600Ω Lines -62dBu -42dBu Euroblock -6dB +10dBu +30dBu EXi8Digital Input Specifications Terminal Format Level IN/OUT Connector YDIF In YDIF RS-422 16IN RJ45 EXo8Analog Output Specifications Output terminal Actual Source impedance For use with nominal Output Level Connector Nominal Max. before clip OUTPUT 1-8 75Ω 10kΩ Lines +4dBu +24dBu Euroblock EXo8Digital Output Specifications Terminal Format Level IN/OUT Connector YDIF Out YDIF RS-422 16OUT RJ45 Exi8 /Exo8 Control I/O Specifications Terminal Format Level Connector Network Ethernet 100Base-TX - RJ-45  

DENON PMA 735R Amplifier + TU 235RD Tuner + DRM 555 Stereo Cassette Deck + DCD635 CD Player Câbles d'alimentation inclus / Power cables included Câbles RCA inclus / RCA cables included 1 convertisseur coaxial / antenne inclus Sans télécommande / No remote TRES BONNE CONDITION / VERY GOOD CONDITION Des traces d’usage apparaissent, mais peu, la peinture sur le dessus du lecteur CD est délavée,mais pas les autres éléments, légère inclinaison de la porte cassette,voir mes photos et video: Traces of use appear, but few, the paint on the top of the CD player is washed away, but not the others, tape door slightly offset, please see my photos and video: https://www.youtube.com/watch?v=IYlkXu9ZyCs FONCTIONNEMENT COMPLET / FULLY WORKING NETTOYE / CLEANED IN & OUT COURROIES NEUVES / NEW BELTS VITESSE REGULEE A 1000Hz ! / 1000 Hz SPEED CALIBRATION HEADS, CAPSTANS, SPINNERS, PINCH ROLLERS NETTOYÉS / CLEANED DESOXIDE / DEOXIDIZED DEMAGNETISE / DEMAGNETIZED PLUG, PLAY AND ENJOY   ! LIVRAISON A LA MAISON EN EMBALLAGE SECURISE ET ASSURE COLISSIMO / UPS / CHRONOPOST SAFE PACKAGING AND INSURED DELIVERY AT HOME WORLWIDE DELIVERY ITALIAN'S AND SPANISH'S ISLANDS, PLEASE CONTACT FOR THE SHIPPING COST BEFORE BUYING DENON PMA 735R   Power output: 65 watts per channel into 8Ω (stereo). Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.01%. Input sensitivity: 2.5mV (MM), 150mV (line) Signal to noise ratio: 86dB (MM), 107dB (line). Output: 150mV (line) Dimensions: 434 x 143 x 344mm. Weight: 9.5kg Accessories: RC-843 remote control TU 235RD Tuner Type: Mono/Stereo Tuner. Tuning Bands: FM, MW. Tuning Scale: Digital FM Tuning Range: 87.5 to 108 MHz. MW Tuning Range: 522 to 1611 kHz Sensitivity: 1.2uV (FM), 18uV (MW). Signal to Noise Ratio: 76dB (FM), 53dB (MW) Distortion: 0.5% (FM). Frequency response: 20Hz to 15kHz (FM) Dimensions: 434 x 75 x 239mm. Weight: 2.5kg DRM 555 Stereo Cassette Deck Type: auto reverse, 2-head, single compact cassette deck Track System: 4-track, 2-channel stereo Heads: 1 x record/playback, 1 x erase. Motor: DC servo Tape Type: type I, CrO2, Metal. Noise Reduction: B, C Headroom Extension: HX Pro. Frequency Response: 20Hz to 17kHz   (Metal tape) Signal to Noise Ratio: 74dB   (dolby C). Wow and Flutter: 0.08% Dimensions: 434 x 135 x 270mm. Weight: 3.6kg DCD635 CD Player Disc format: CD Digital converter: 2 x PCM61P-L, 8 x oversampling CD Mechanism: KSS-213B; Frequency response: 2Hz to 20kHz Dynamic range: 98Db. Signal to Noise Ratio: 107dB Channel separation: 100Db. Total harmonic distortion: 0.003% Line output: 2V. Digital outputs: optical Dimensions: 434 x 100 x 283mm. Weight: 4.1kg Accessories: RC-266 remote control   ADC - AKG - AUDIO-TECHNICA - DENON - DYNAVOX - EMPIRE - GARRARD - JELCO - LENCO - MICRO SEIKI - ORTOFON - PICKERING - REGA - SHURE - SME - STANTON - THORENS   3A - AUDAX - B&W - BOSE - CABASSE - CELESTION - CERWIN WEGA - DITTON -  ELIPSON - FRANCE ACOUSTIQUE - HRC - INFINITY - JAMO - JBL - JENSEN - JM REYNAUD - KEF - KLIPSCH - LANSING - LEAK - LES - MAGNAT - MARTIN - MERCURIALE -  MISSION -ROGERS - SIARE - TAD (PIONEER) - TANNOY - TRIANGLE - ULTRALINEAR - WHARFEDALE   3M - AGFA - AMPEX - BASF - FUJI - MAXELL - MEMOREX - NAGRA - NAKAMICHI - SCOTCH - SONY - TANDBERG - TDK A&R CAMBRIDGE - ACCUPHASE - AIWA - AKAI - ALPINE/ALPAGE - AMSTRAD - ARCAM - AUDIO RESEARCH - AUREX (TOSHIBA) - BANG & OLUFSEN (B&O) - BARTHE - BENYTONE - BLAUPUNKT - BOSE - BRANDT - BRAUN - BRYSTON - BST - CAMBRIDGE AUDIO - CARVER - CONTINENTAL EDISON - CREEK - CYBERNET - DAVID HAFLER - DENON - DUAL - DYNACO - ELECTROCOMPANIET - EMB - ESART - FERGUSON - FISHER - GRAETZ - GRUNDIG - H.H.SCOTT - HARMAN/KARDON - HITACHI - ITT - JEFF ROWLAND - JVC - KENWOOD - KRELL - LINN - LOEWE -  LUXMAN - MARK LEVINSON – MARANTZ - Mc INTOSH - MERIDIAN - MICROMEGA - MITSUBISHI - NAD - NAIM - NAKAMICHI - NEC - NIKKO - NYTECH - ONKYO - OPTONICA  (SHARP) - PALLADIUM - PANASONIC - PATHE MARCONI - PHASE LINEAR - PHILIPS - PHONOPHONE - PIONEER - PROTON - QUAD   - RADIOLA - REVOX - ROTEL - SABA - SAE - SAMSUNG - SANSUI - SANYO - SHARP - SCHAUB-LORENZ - SCHNEIDER - SCIENTELEC - SETTON -  SHERWOOD - SIEMENS - SONY - SOUNDCRAFTSMEN - STAX - STUDER (REVOX) - SUGDEN - SYMPHONIE - TASCAM (TEAC) - TEAC -  TECHNICS - TELEFUNKEN - TELETON - TENSAI (AKAI) - THOMSON - THRESHOLD - TOSHIBA - UHER - UNIVERSUM - WALTHAM - WEGA - YAMAHA    

Rare paire Luxman C300 et M300:Amplificateur et préamplificateur (avec phono). État : "Occasion" En excellent état de fonctionnement, notez qu' il faudra remplacer une ampoule du voyant Led  "classe A". Voltage 220V. Les deux appareils sont visibles chez Jefferson Hifi à Pérouse où je les ai déposés. Livraison possible en France, en Europe,etc nous consulter pour les frais d'envoi internationaux. Le M300 a été produit en même temps que la série C300. Je crois qu’il n’en a été produit que 2000 dans le monde. C’est non seulement une paire de collection, mais le haut de gamme des luxman des années 1980. Ils sont les dernières combinaisons pré/ampli, à avoir été fabriquées sans implication de Alpine(qui a ensuite  modifié sérieusement la qualité Luxman  hélas.). ils ont été primés "produit de l'année" au début des années 80.  Le M300 se laisse utiliser soit en classe A, où il développe 2x42 w sous 8 ohms en classe A, ou alors 172w en classe AB sous 8 ohms. Comme toujours chez Luxman, on peut espérer une dizainede watts supplémentaires dans chaque modes, vu qu'ils utilisent unsystème de mesure très strict sur leurs fiches techniques. Il faut surtout savoir qu’il ne faut basculer de classe AB en classe A que à l’arrêt, en redémarrage à froid.  Voici  les caractéristiques techniques (https://audio-database.com/LUXMANALPINE-LUXMAN/amp/m-300-e.html) et https://audio-database.com/LUXMANALPINE-LUXMAN/amp/c-300-e.html 1)Préampli C300: Frequency response: 0.5Hz to 140kHz   Total harmonic distortion: 0.005% Input sensitivity: 0.09mV (MC), 2mV (MM), 140mV (line)      Signal to noise ratio: 80dB (MM), 100dB (line) Output: 140mV (line), 1V (Pre out), 20V (Pre out Max)  Dimensions: 478 x 163 x 384mm     Weight: 9kg 2)amplificateur M300 Form Duo beta plusX poweramplifier Succession effectiveoutput (20Hz - 20kHz, both channel simultaneous operation) Class-A: 40W+40W (8ohms) AB class: 270W+270W (4ohms) 170W+170W (8ohms) THD (8 ohms) 20Hz- 20kHz-3dB Class-A: 0.005% or less AB class: 0.005% or less Cross modulationdistortion (8 ohms) 60Hz: 7kHz=4:1, -3dB Class-A: 0.005% or less AB class: 0.005% or less Output bandwidth Class-A: 10Hz-100kH-3dB(0.015% of distortion) AB class: 10Hz - -100kHz three dB(0.04% of distortion) Frequency characteristic 10hz-100kHz-1dB (aClass-A and AB class) Input sensitivity Class-A: 0.45V ABclass: 1V Input impedance 50kohm (a Class-A and ABclass) SN ratio (IHF-Acorrection) Class-A: 115dB ABclass: 120dB Remains noise (IHF-Acorrection) 30 microvolts (a Class-Aand AB class) Dumping factor 120 (1kHz, 8 ohms, aClass-A, and AB class) Protection network DC drift detectionspeaker protection network Overcurrent detection amplifierprotection network Attachment Circuit operationswitchpoint (indicator) Peek indicator Inputattenuator Headset jack Speaker-off switchpoint(indicator) Line phase sensor Supply voltage AC100V, 50Hz/60Hz Power consumption (Electrical Appliance and Material Control Law) Class-A: 420W ABclass: 430W Dimensions Width 478x height 214xdepth of 484mm Weight 30kg Stereo power amplifier which adopted the Duo beta plusX circuitry. In order to control NFB of an amplifier circuitry appropriately, the Duo beta circuitry was developed and it is adopted as M-300. After this makes amplifier to the extent that it is used also from a nakedness property as it was, it adds proper-quantity NFB and DC servo as finish of a tone quality, and is suppressing the transitional distortion of a supression of play sound, TIM, etc. by superfluous NFB etc. Furthermore, in M-300, the thought of a suitable control is introduced also into a power circuit, and it is considered as the power-source Duo beta plusX. At plusX, the stability of a comfortable tone quality and an operation is reconciled because the bottom gives controlling force calmly on the assumption that a generous power-source part. M-300 can change and use a Class-A and AB class. The Class-A operation has a structure which amplifies a signal wave form as it is. Therefore, it becomes unrelated to switching distortion or crossover distortion, and does not have the cause that it is distorted in addition to an element's own linearity. In M-300, the Class-A operation excellent in adopting a Duo beta as LAPT which excelled [element] in the high region property, and an amplifier circuitry, and adopting plusX as a power circuit is realized. In AB class, Oide power which drives transitional distortion below into a limit of measurement in pursuit of a nakedness property also in an operation, and is not made in a Class-A operation on it is realized. At the time of a switching of a Class-A / AB class, in a performance, sound does not break off and a noise is not generated, either. Circuitry constituted all the amplification stages from a push-pull circuit from the input stage to the output stage, and the amplifier which was excellent in the nakedness property which will be the requisite for a Duo beta circuitry is realized. The pre-driver stage is making the input stage the transistor which was excellent in the high region property with the cascode interconnection with the stream composition of the cascode bootstrap and the differential push pull by complimentary FET of a Pch type and a Nch type. And the driver stage and the power stage are considered as the push pull stream composition by a three-step Darlington connection. A linearity makes an output element high speed power transistor linear arithmetic processor-T which was well excellent in the high region property with a triple push pull stream composition, and the electric current is sent. In this way, the static characteristics and the dynamic behavior improved. And proper-quantity NFB and DC servo are added. The power-source part had the twin monophonic stream composition of right-and-left full independence, and has acquired the merit of a linearity covering all the bands, and the outstanding crosstalk property. The power transformer is performing and using the coil mandatory adopted and put into practice among the object for Rch, and two Lch. First, the power stage and the drive stage were made into another coil, and also the primary side and secondary side has unified the orientation of a coil. This is because it is checking having influence on play sound with the potential (polarity) which a transformer begins to roll, rolls and the last each has between opposite groundings. Moreover, four right and left adopt the type only with a capacity of 12,000 micro F for an audio as a filter capacitor, and low-impedance-ization of the power-source part is attained to it. In order to cope with the rush current which becomes large as the capacity of a power-source part becomes large, the rushes current preventing circuitry is adopted. The speaker protection network and the amplifier protection network are carried. The internal organs of the speaker protection network which detects DC output in an output-terminal and separates an output are carried out. Furthermore, when the speaker code etc. short-circuits, even if there is a big input, an amplifier circuitry is protected or the electric-current preventing circuitry is carried. After the elements currently used examine, it is using it, carrying out a tone-quality mandatory strictly uniquely. The film capacitor generally called non-polar is also arranging a polarity etc., and the capacitor is carrying out the tone-quality mandatory strictly. Moreover, the precision succession good transformation Detent volume excellent in the tone quality and a feeling of an operation is adopted as input attenuator. Furthermore, in terminals, the small gilding pin jack of contact resistance was adopted as the input terminal, and the large-sized screw type is adopted as a speaker termination. The product line was packed into the shortest distance, and also it has chosen high materials of the tone-quality effect, such as a shielded cable of oxygen free high conductivity copper and 500 core. Moreover, in order to suppress an elevation of the source impedance of the pattern side of a substrate, the power bus by a copper plate was adopted and the performance of a power source is employed efficiently. The line phase sensor is carried, by the functionality which detects this polarity, the polarity of the equipment was unified and the tone quality is improved. The indicator turned on at the clipping point of an output is carried, and a peek can be supervised.

Superbe et rare ampli intégré haut de gamme Sansui AU-X701 de 1987, en excellent état de fonctionnement et de présentation (juste quelques rayures visibles sur les photos). Maison non fumeur. Révisé récemment avec remplacement des condensateurs électrochimiques des cartes de puissance et d'alimentation par des modèles de qualité à faible ESR (Nichicon, Elna, Elite). Remplacement des composants altérés par la fameuse colle qu'utilisait Sansui à l'époque. Les réglages ont été faits également. Cet ampli est le 2ème plus gros de la superbe série AU-X des années 80 après le 901, dont il est quasiment le jumeau (puissance réduite de 30W et absence des entrées XLR). Il est également très supérieur aux 301 et 701 situés en entrée de gamme. Il est l’équivalent du AU-alpha607 vendu au Japon. Sa puissance confortable alliée à une très grande finesse de détails le rendent apte à alimenter des enceintes difficiles. Excellente entrée phono MM et MC (à transfo !). Spécifications: Power output: 100 watts per channel into 8Ω (stereo) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.005% Input sensitivity: 0.3mV (MC), 2.5mV (MM), 150mV (line) Signal to noise ratio: 88dB (MM), 110dB (line) Output: 150mV (line) Speaker load impedance: 4Ω to 16Ω Dimensions: 448 x 160 x 441mm Weight: 17.1kg Me contacter si besoin d'autres photos ou informations. Sera parfaitement emballé avant envoi gratuit par Mondial Relay (ou Colissimo sur demande). N'hésitez pas à me poser vos questions avant achat. -------------------------------------------------------------------------- For sale my 1987 Sansui AU-X701 integrated power amplifier, in excellent condition (only few superficial scuffs here or there) and still in use in a smoke and pet free home. All electrolytics capacitors of the main board and power supply board just replaced with new low ESR Nichicon and Elna. Components altered by the famous glue Sansui used this time replaced with new ones. Adjusted and fully checked. All functions work 100% perfectly. Ready to plug and play ! The AU-X701 is the second of the AU-X serie after the famous AU-X901. The difference is a little less power but is has the same quality of its big brother (17kg on the scale !). Spécifications: Power output: 100 watts per channel into 8Ω (stereo) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.005% Input sensitivity: 0.3mV (MC), 2.5mV (MM), 150mV (line) Signal to noise ratio: 88dB (MM), 110dB (line) Output: 150mV (line) Speaker load impedance: 4Ω to 16Ω Dimensions: 448 x 160 x 441mm Weight: 17.1kg Ask for more photos or other info if needed. Will be securely packaged before shipping. Shipping To Europe is 25€ economic, please ask for express shipping cost if prefered. Send worldwide, please ask for actual shipping cost to your country.

Type d'annonce Particulier Offre Marque Kenwood Description Lecteur & Graveur CD - Kenwood DP-1050 Disc format: CD Digital converter: SM5871AS CD Mechanism: KSS-240A Frequency reponse: 4Hz to 20kHz Signal to Noise Ratio: 94dB Channel separation: 90dB Total harmonic distortion: 0.005% Line output: 1.2V Dimensions: 440 x 107 x 261mm Weight: 3.3kg 10 € Lecteur double K7 - Kenwood KX-W2050 Specifications Type: double compact cassette deck Track System: 4-track, 2-channel stereo Tape Speed: 4.76 cm/s Heads: 1 x playback, 1 x record/playback, 1 x erase Tape Type: type I, CrO2, Metal Noise Reduction: B, C Frequency Response: 25Hz to 18kHz (Metal tape) Signal to Noise Ratio: 73dB (dolby C) Wow and Flutter: 0.09% Total Harmonic Distortion: 3.5% Input: 122.8mV (line) Output: 0.775V (line) Dimensions: 440 x 137 x 269mm Weight: 4.6kg Year: 1993 8 €

yamaha professional series p2100 ns10 ns-10 studio power amplifier pc2002 pc2602 ______________________________________________________________________________________________________________ SPECIFICATIONS P2100 Power output: 85 watts per channel into 8ohm (stereo) Frequency response: 20Hz to 50kHz Total harmonic distortion: 0.02% Damping factor: 250 Input sensitivity: 0.775V Signal to noise ratio: 110dB Dimensions: 480 x 134 x 320mm POIDS: 14kg UTILISATION MONDIALE Avec INTERRUPTEUR INTERNE permettant d'être en 110v ou 220V (positionne actuellement en 220v) ___________________________________________________________________________________________________________ laurent au o665oo5297 sur PARIS 12e au métro PICPUS ou sur JOINVILLE LE PONT (94) RER A Regardez toutes mes autres annonces directement ici __________________________________________________________________________________________________ yamaha professional series p2100 ns10 ns-10 studio power amplifier pc2002 pc2602 ____________________________________________________________________ SPECIFICATIONS P2100 Power output: 85 watts per channel into 8ohm (stereo) Frequency response: 20Hz to 50kHz Total harmonic distortion: 0.02% Damping factor: 250 Input sensitivity: 0.775V Signal to noise ratio: 110dB Dimensions: 480 x 134 x 320mm Weight: 14kg Finish: semi gloss black WORLDWIDE UTILISATION with INTERNAL SWITCH ALLOW to be in 110v or 220V(actually set in 220v) ______________________________________________________________ Any questions, let me know thanks for watching !! PLEASE CHECK MY OTHER AUCTIONS DIRECTLY here

Lecteur CD Enregistreur Philips CDR 760 en très bon état de fonctionnement  Caractéristiques - Catégorie:Graveurs de CD audio - Digital frequency response ......................................0-22,050Hz Playback S/N ....................................................................100dB Playback dynamic range ....................................................95dB Play back total harmonic distortion..................0.0056%, -85dB Recording S/N (Analogue)..................................................90dB Recording S/N (Digital)......................................Equal to source Recording dynamic range ..................................................92dB Recording total harmonic distortion ................0.0056%, -85dB Digital coaxial input (IEC 958) ....................44.1Khz +/-100ppm Digital optical input (IEC958) ....................44.1Khz +/- 100ppm Analogue input (level potmeter) ............500mVrms/50k Ω=0dB Audio output ........................................................2V RMS ±2dB Digital coaxial output ............................................0.5 Vpp/75 Ω Headphones ..............................................0-5V RMS/8-2000 Ω Dimensions....................................................435 x 305 x 88mm vendu avec la télécommande Envoi par Mondial Relais et le Paiement par chèque est possible sur demande !!! Après la réception du règlement, l'expédition s'effectuera dans les 48h.Ce sont des pièces d'occasion,donc elles peuvent comporter certains défauts esthétiques mais sont parfaitement fonctionnelles. (le colis sera très sécurisé) .Vendu dans l'état, ni repris ni échangé sauf dysfonctionnement.  Je ne peux être tenu pour responsable des dommages pendant le transport.  Vous achetez en connaissance de cause. Merci de votre compréhension Pas d'envoi hors pays de l'Union Européenn - No sending out of the European Union -  Sin envío fuera de la Unión Europea - Никакой отправки из Европейского Союза

Chaine hi fi 4 éléments YAMAHA (CDX-450E / A-300 / TX-396L / K-200e). État : Occasion trés bonne état, peut de rayures, tout les éléments fonctionnent parfaitement livré avec tout les câbles. Specifications ampli Power output: 30 watts per channel into 8Ω (stereo) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.05% Damping factor: 40 Input sensitivity: 2.5mV (MM), 150mV (line) Signal to noise ratio: 88dB (MM), 98dB (line) Output: 150mV (line) Dimensions: 435 x 92 x 293mm Weight: 5.2kg Year: 1983 specifications lecteur cd, voir photos specifications tuner: 40 stations mémorisables par accès aléatoire Mémorisation automatique des stations FM Réorganisation des présélections Syntonisation par tuner à quartz et circuit PLL Section FM Fréquences couvertes: 87.0-108.0MHz Sensibilité: 0.9uV Sélectivité: 70dB Réponse en fréquence: 30 Hz -13 kHz Distorsion: 0.1% (Mono 1kHz @ 40 kHz de déviation). 0.2% (Stéréo 1kHz @ 40 kHz de déviation) Rapport signal/bruit: Mono 75dB - Stéréo 70dB Séparation des canaux: 40dB @ 1kHz Prise d'antenne: 75 ohm asymétrique Section AM MW - 522kHz -1611 kHz Sensibilité: 100uV / 30uV Dimensions: 86(h) x 435(L) x 278 (p) mm Poids: 3,2 kg specifications lecteur cassette: Type: 2-head, single compact cassette deck Track System: 4-track, 2-channel stereo Tape Speed: 4.76 cm/s Heads: 1 x record/playback, 1 x erase Motor: 1 x reel, 1 x capstan Tape Type: type I, CrO2, Metal Noise Reduction: B Frequency Response: 40Hz to 15kHz  (Metal tape) Signal to Noise Ratio: 66dB  (dolby B) Wow and Flutter: 0.05% Total Harmonic Distortion: 1.0% Input: 60mV (line), 0.3mV (mic) Output: 0.35V (line) Dimensions: 435 x 112 x 278mm Weight: 4.5kg Year: 1982

Amplificateur Pioneer SA 9500 SERVICED. All defective caps have been replaced and two relays also. Pioneer believes in music. And if you do, too, you'll find a faithful friend in the new SA-9500; one of the most musically minded pre/main stereo amplifiers we've engineered. It combines massive stereo output power with a delicacy of transparency; a rare blend in these days of lots of power at any cost. In other words, we haven't simply beefed up the power section at the expense of the tonal quality, frequency response or other aspects so important to the sound of a high fidelity component. The Pioneer SA-9500 does deliver an unusually large continuous power output of 80 watts per channel, min RMS at 8 ohms from 20 Hertz to 20,000 Hertz with no more than 0.1% total harmonic distortion, but it also ensures that even when operated at low volumes the performance retains a crisp, sparkling clarity. The dynamic response and reliability of the SA-9500 are matched with a flexibility of use you'll rarely find in this price range. Tone control versatility, for instance: both the bass and treble sections have 3-position turnover selection and there's a tone on/off switch for "flat" response at a touch. The 2-step high and low filters, the extra convenient tape duplicating switching system, multiple input source selection, 2-system speaker switching and much more mean first-class handling. We believe in music. And we're sure that if you do, too, you'll believe in the all-new SA-9500. Specifications Power output: 80 watts per channel into 8Ω (stereo) Frequency response: 7Hz to 40kHz Total harmonic distortion: 0.005% Damping factor: 30 Input sensitivity: 6mV (mic), 2.5mV (MM), 150mV (line) Signal to noise ratio: 65dB (mic), 70dB (MM), 90dB (line) Output: 150mV (line), 2V (Pre out) Semiconductors: 2 x FET, 54 x transistors, 26 x diodes Dimensions: 420 x 165 x 403mm Weight: 17.2kg Accessories: connecting cord, hex wrench, jack covers Year: 1976

Voiture sans fil Bluetooth Transmetteur FM Adaptateur Radio Lecteur MP3 Charg LB Feature: 1.This product is a car-specific Bluetooth hands-free car charger MP3 player. 2.Using high-performance professional-grade Bluetooth 4.1 chip. 3.You can use your Bluetooth connection to transmit MP3 music from your phone to your car stereo via wireless transmission. 4.Support hands-free calling. 5.Don't need to modify your car, and you can enjoy the music while you're on the road. 6.Bluetooth 4.2+EDR version, support operation of voice prompts, support call number. 7.Intelligent recognition of all types of Android and Apple mobile phones and other devices, USB charging support 2.0 fast charge. USB 1: 2.1A fast charging, USB 2: 1A charging/support USB disk playing. 8.Support FM full-frequency point emission. 9.The music format is MP3/WMA/WAV/APE/FLAC, support automatic power off memory function. 10.Bluetooth stereo A2DP music playback.   Specifications: USB interface: high speed USB2.0 Screen: LED screen Support U disk capacity: ≤32GB (U disk not included) Power supply: DC12V-24V Supported file types: MP3/WMA/FLAC/WAV/APE Operating Current: 45mA DC12V Bit rate: 64-320 kbps FM frequency range: 87.5-107MHz (100KHz stepping) Signal to noise ratio: 85dB (FM: 65dB) Harmonic distortion: Working temperature: 0°C-60°C Launch distance: ≤5 meters Item net weight:30g   Package Included: 1 * USB Phone Charger Handsfree Car kit Item Specifics Connectors: Bluetooth Wireless Color: Black Type: FM Transmitter Screen: LED screen Power supply: DC12V-24V Features: Handsfree Calling Operating Current: 45mA DC12V Bit rate: 64-320 kbps MPN: Does Not Apply FM frequency range: 87.5-107MHz Signal to noise ratio: 85dB (FM: 65dB) Harmonic distortion: <0.05% (FM <0.1%) Working temperature: 0 Launch distance: <5 meters Brand: Vtin Payment Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. Shipping Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Terms of Sale Si vous n'êtes pas satisfait de votre achat, contactez-nous sans hésiter. Les articles peuvent être retournés dans 30 jours en état inutilisé, nous effectuerons un échange et un remboursement une fois que nous aurons reçu l'objet. Gardez les étiquettes entières et les éléments propres sans saveur, si non nous n'accepterons pas le retour. About US Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Le 10-nov.-20 à 10:01:22 Paris, le vendeur a ajouté les informations suivantes:

Très rare ampli/tuner Sansui 350 fabriqué en France par la société Henri COTTE Aucune trace, comme neuf ! L'ensemble des lampes a été changé (les 5 d'origines fournies) Léger souffle de fond (qui ne s'amplifie pas avec le volume) La partie ampli est un Sansui AU222 Very rare Sansui 350 receiver manufactured in France by Henri COTTE No trace, like new ! The set of lamps has been changed (the 5 origin provided) Light background breath (not amplified with volume) The amp part is a Sansui AU222 Ask for shipping cost please ! Specifications Sansui 350: Tuning range: FM, MW Power output: 18 watts per channel into 8Ω (stereo) Frequency response: 30Hz to 20kHz Total harmonic distortion: 1% Damping factor: 34 Input sensitivity: 2.2mV (MM), 150mV (DIN), 150mV (line) Signal to noise ratio: 60dB (MM), 65dB (line) Output: 150mV (line) Speaker load impedance: 8Ω (minimum) Semiconductors: 31 x transistors, 21 x diodes, 4 x varistors Dimensions: 4-1/2 x 15-13/16 x 13-1/8 inches Weight: 19.5lbs Year: 1968 Spécifications Sansui AU222 Power output: 18 watts per channel into 8Ω (stereo) Frequency response: 20Hz to 30kHz Total harmonic distortion: 0.8% Damping factor: 20 Input sensitivity: 2mV (MM), 150mV (DIN), 150mV (line) Signal to noise ratio: 60dB (MM), 65dB (line) Channel separation: 50dB (line) Output: 150mV (line), 30mV (DIN) Speaker load impedance: 4Ω to 16Ω Semiconductors: 18 x transistors, 4 x diodes Dimensions: 292 x 111 x 267mm

Amplificateur Sansui BA 2000 - pré-amplificateur Sansui CA 2000. État : "Occasion" The BA-2000 is a power amplifier made to complement the CA-2000 preamplifier. The unit features a toroidal power transformer, dual transistor differential amplifier with constant current power supply and 2 transistor current mirror circuit. Specifications Power output: 110 watts per channel into 8Ω (stereo) Frequency response: 5Hz to 100kHz Total harmonic distortion: 0.03% Damping factor: 70 Input sensitivity: 1V Signal to noise ratio: 115dB Speaker load impedance: 8Ω (minimum) Dimensions: 460 x 160 x 375mm Weight: 18.3kg Year: 1978 The CA-2000 stereo preamplifier is for the purist who likes to be in control. A full set of controls makes the most of the musical qualities, along with a flat response over 10Hz to 80kHz with less than 0.03% THD. Specifications Frequency response: 10Hz to 80kHz Total harmonic distortion: 0.03% Input sensitivity: 2mV (MM), 150mV (DIN), 150mV (line) Signal to noise ratio: 75dB (MM), 90dB (DIN), 90dB (line) Output: 150mV (line), 30mV (DIN), 1V (Pre out), 12V (Pre out Max) Dimensions: 460 x 160 x 310mm Weight: 9.9kg Year: 1978

The MATCH-IT and MATCH-IT2 allow the benefits of inexpensive domestic and semi-professional source equipment to be applied to the professional installation with minimum compromise in sound quality. As well as substantial cost savings, such machines also offer wider choice and availability compared to their professional brethren and, if well chosen, can prove extremely reliable. Mounted as close to the source equipment as possible, the MATCH-IT/MATCH-IT2 translate between the low level, unbalanced signals used by consumer devices and the higher amplitude, more noise-immune, balanced format found in the professional environment. From that point onwards, mains hum and interference from densely packed equipment will be rejected. Both units are packaged in a robust metal case suited to mounting on rack shelves or in the Canford “Rack-Pak”, beneath woodwork or inside rack cabinets by means of screws, ties or sticky pads. They are supplied with a mains lead, comprehensive instructions and a five year warranty. MATCH-IT Bidirectional Matching Unit Provides matching in both the record (balanced to unbalanced conversion) and replay (unbalanced to balanced) directions for one piece of domestic recording equipment, such as a tape or Mini-Disk recorder. The gain of both sections may be individually varied over a wide range that includes 0dB for higher level sources requiring balancing but no amplification. Technical Specification:Unbalanced to balanced sections (MATCH-IT and MATCH-IT2):Inputs:Unbalanced, RCA (phono)Input impedance:22k ohms Maximum input level:+24dBuNominal gain range:0dB to +25dBOutput noise:-94dB RMS re +8dBu O/P (20Hz-22kHz, +14dB gain)Harmonic distortion:0.005%THD (1kHz, +8dBu O/P)Frequency response:20Hz-20kHz ±0.1dBOutputs:Electronically balanced, XLR maleMaximum output level:+24dBu (10k ohms load), +23.5dBu (600ohms load)Balanced to unbalanced sections (Match-IT only):Inputs:Electronically balanced, XLR femaleInput impedance:20k ohms Maximum input level:+25dBuInput CMRR:60dB typ.Nominal gain range:-25dB to 0dBOutput noise:-94dB RMS re +8dBu I/P (20Hz-22kHz, -14dB gain)Harmonic distortion:0.005% (1kHz THD, -14dBu O/P)Frequency response:20Hz-20kHz ±0.1dBOutputs:Unbalanced, RCA (phono)Maximum output level:+24dBu (10k ohms load)MATCH-IT and MATCH-IT2:Power supply:230 VAC ±10% at 6VA (115V to special order)Dimensions(excluding connectors):294(w) x 114(d) x 44(h)mmWeight:0.9kg CONTACT for INTERNATIONAl SHIPPING FEES

Voiture sans fil Bluetooth Transmetteur FM Adaptateur Radio Lecteur MP3 Charg SH Feature: 1.This product is a car-specific Bluetooth hands-free car charger MP3 player. 2.Using high-performance professional-grade Bluetooth 4.1 chip. 3.You can use your Bluetooth connection to transmit MP3 music from your phone to your car stereo via wireless transmission. 4.Support hands-free calling. 5.Don't need to modify your car, and you can enjoy the music while you're on the road. 6.Bluetooth 4.2+EDR version, support operation of voice prompts, support call number. 7.Intelligent recognition of all types of Android and Apple mobile phones and other devices, USB charging support 2.0 fast charge. USB 1: 2.1A fast charging, USB 2: 1A charging/support USB disk playing. 8.Support FM full-frequency point emission. 9.The music format is MP3/WMA/WAV/APE/FLAC, support automatic power off memory function. 10.Bluetooth stereo A2DP music playback.   Specifications: USB interface: high speed USB2.0 Screen: LED screen Support U disk capacity: ≤32GB (U disk not included) Power supply: DC12V-24V Supported file types: MP3/WMA/FLAC/WAV/APE Operating Current: 45mA DC12V Bit rate: 64-320 kbps FM frequency range: 87.5-107MHz (100KHz stepping) Signal to noise ratio: 85dB (FM: 65dB) Harmonic distortion: Working temperature: 0°C-60°C Launch distance: ≤5 meters Item net weight:30g   Package Included: 1 * USB Phone Charger Handsfree Car kit Item Specifics Connectors: Bluetooth Wireless Color: Black Type: FM Transmitter Screen: LED screen Power supply: DC12V-24V Features: Handsfree Calling Operating Current: 45mA DC12V Bit rate: 64-320 kbps MPN: Does Not Apply FM frequency range: 87.5-107MHz Signal to noise ratio: 85dB (FM: 65dB) Harmonic distortion: <0.05% (FM <0.1%) Working temperature: 0 Launch distance: <5 meters Brand: Vtin Payment Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. Shipping Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Terms of Sale Si vous n'êtes pas satisfait de votre achat, contactez-nous sans hésiter. Les articles peuvent être retournés dans 30 jours en état inutilisé, nous effectuerons un échange et un remboursement une fois que nous aurons reçu l'objet. Gardez les étiquettes entières et les éléments propres sans saveur, si non nous n'accepterons pas le retour. About US Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Le 11-mai-21 à 11:37:33 Paris, le vendeur a ajouté les informations suivantes:

Platine CD / Compact Disc Player PIONEER PD 207 + Câble d'alimentation / Power cable Fonctionne parfaitement / Fully working   Bon état / Good condition Des traces d'usage apparaissent, notamment le sigle Play effacé, voir mes photos   Traces of use appear, Play acronym is erased, please see my photos   Envoi à la maison en emballage protégé et assuré COLISSIMO / CHRONOPOST / UPS Shipping at home in a safe and insured package WORLWIDE DELIVERY ITALIAN’S ANS SPANISH’S ISLANDS, PLEASE CONTACT FOR SHIPPING COST MANUEL DISPONIBLE GRATUITEMENT SUR HIFI ENGINE.  Specifications HiFi Engine Frequency response: 2Hz to 20kHz Dynamic range: 96dB Signal to Noise Ratio: 98dB Total harmonic distortion: 0.003% Line output: 2V Digital outputs: optical Dimensions: 420 x 101 x 267mm Weight: 3.1kg Specifications HiFi Engine Disc format: CD Digital converter: CXD2561BM CD Mechanism: KSS-240A Frequency response: 2Hz to 20kHz Dynamic range: 98dB Signal to Noise Ratio: 100dB Channel separation: 95dB Total harmonic distortion: 0.0045% Line output: 2V Dimensions: 430 x 100 x 295mm Weight: 3.5kg ADC - AKG - AUDIO-TECHNICA - DENON - DYNAVOX - EMPIRE - GARRARD - JELCO - LENCO - MICRO SEIKI - ORTOFON - PICKERING - REGA - SHURE - SME - STANTON - THORENS   3A - AUDAX - B&W - BOSE - CABASSE - CELESTION - CERWIN WEGA - DITTON -  ELIPSON - FRANCE ACOUSTIQUE - HRC - INFINITY - JAMO - JBL - JENSEN - JM REYNAUD - KEF - KLIPSCH - LANSING - LEAK - LES - MAGNAT - MARTIN - MERCURIALE -  MISSION -ROGERS - SIARE - TAD (PIONEER) - TANNOY - TRIANGLE - ULTRALINEAR - WHARFEDALE   3M - AGFA - AMPEX - BASF - FUJI - MAXELL - MEMOREX - NAGRA - NAKAMICHI - SCOTCH - SONY - TANDBERG - TDK A&R CAMBRIDGE - ACCUPHASE - AIWA - AKAI - ALPINE/ALPAGE - AMSTRAD - ARCAM - AUDIO RESEARCH - AUREX (TOSHIBA) - BANG & OLUFSEN (B&O) - BARTHE - BENYTONE - BLAUPUNKT - BOSE - BRANDT - BRAUN - BRYSTON - BST - CAMBRIDGE AUDIO - CARVER - CONTINENTAL EDISON - CREEK - CYBERNET - DAVID HAFLER - DENON - DUAL - DYNACO - ELECTROCOMPANIET - EMB - ESART - FERGUSON - FISHER - GRAETZ - GRUNDIG - H.H.SCOTT - HARMAN/KARDON - HITACHI - ITT - JEFF ROWLAND - JVC - KENWOOD - KRELL - LINN - LOEWE -  LUXMAN - MARK LEVINSON – MARANTZ - Mc INTOSH - MERIDIAN - MICROMEGA - MITSUBISHI - NAD - NAIM - NAKAMICHI - NEC - NIKKO - NYTECH - ONKYO - OPTONICA  (SHARP) - PALLADIUM - PANASONIC - PATHE MARCONI - PHASE LINEAR - PHILIPS - PHONOPHONE - PIONEER - PROTON - QUAD   - RADIOLA - REVOX - ROTEL - SABA - SAE - SAMSUNG - SANSUI - SANYO - SHARP - SCHAUB-LORENZ - SCHNEIDER - SCIENTELEC - SETTON -  SHERWOOD - SIEMENS - SONY - SOUNDCRAFTSMEN - STAX - STUDER (REVOX) - SUGDEN - SYMPHONIE - TASCAM (TEAC) - TEAC -  TECHNICS - TELEFUNKEN - TELETON - TENSAI (AKAI) - THOMSON - THRESHOLD - TOSHIBA - UHER - UNIVERSUM - WALTHAM - WEGA - YAMAHA        

Cambridge Audio Topaz AM10 Stereo Integrated Amplifier + Topaz CD10 Compact Disc Player Sans télécommandes! Puissance de sortie: 35 watts par canal en 8Ω (stéréo) Réponse en fréquence: 5 Hz à 50 kHz Distorsion harmonique totale: 0,15% Facteur d'amortissement: 50 Rapport signal sur bruit: 82 dB (ligne) Dimensions: 76x430x340mm Power output: 35 watts per channel into 8Ω (stereo) Frequency response: 5Hz to 50kHz Total harmonic distortion: 0.15% Damping factor: 50 Signal to noise ratio: 82dB (line) Dimensions: 76 x 430 x 340mm Topaz CD10 Compact Disc Player Format du disque: CD Convertisseur numérique: WM8761 Réponse en fréquence: 20 Hz à 20 kHz Rapport signal sur bruit: 95 dB Distorsion harmonique totale: 0,006 % Sorties numériques: coaxiales Dimensions: 430 x 85 x 305 mm Disc format: CD Digital converter: WM8761 Frequency response: 20Hz to 20kHz Signal to Noise Ratio: 95dB Total harmonic distortion: 0.006% Digital outputs: coaxial Dimensions: 430 x 85 x 305mm BON ETAT!!! TRÈS PROPRE Les photos sont la partie de la description. Vous achetez ce que vous voyez. Pour toutes questions ou photos supplémentaires, n'hésitez pas à me contacter. Attention! Le prix de la livraison varie en fonction du pays.  Demandez-moi le prix de la livraison, s'il vous plaît. Ask for shipping costs. Shipping to the islands is more expensive.

ampli de puissance avec sont préamplificateur TECHNICS SE-A808 / ST-K808 l'ampli de puissance est utilisable soit en stéreo ou bridgeable en mon avec le sélecteur a l'arrière,le préampli lui reste en veille avec réglage de l'heures, il suffit d'appuyez sur l'entrèe source de sont choix: phono,aux,tape, l'arrêt ce fait le bouton en bas a gauche la fonction tuner fm/am ne fonctionne plus, très bonne musicalité. Contact for a good price for international shipping to Europe please. Specifications Power output: 45 watts per channel into 8Ω (stereo), 90 watts into 8Ω (mono) Frequency response: 5Hz to 60kHz Total harmonic distortion: 0.02% Damping factor: 32 Input sensitivity: 0.5V Signal to noise ratio: 108dB Speaker load impedance: 4Ω to 16Ω Dimensions: 430 x 75 x 280mm Weight: 6.8kg Year: 1980 __________ Specifications Frequency response: 10Hz to 50kHz Total harmonic distortion: 0.05% Input sensitivity: 2.5mV (MM), 180mV (DIN), 150mV (line) Signal to noise ratio: 75dB (MM), 85dB (line) Channel separation: 55dB (line) Output: 30mV (DIN), 0.5V (Pre out), 10V (Pre out Max) Dimensions: 430 x 75 x 310mm Weight: 4.8kg Year: 1980

Parfait  état, fonctionnement parfait testé, sera très solidement emballé. Peut être envoyé de france Suisse vers Suisse 14 Frs en recommandé Pour pays hors Europe me contacter pour les frais d'envoi  Bonnes enchères  This Pioneer CT-S670D is a stereo cassette deck with Dolby B/C and HX-Pro noise reduction, it was first sold by Pioneer in 1997 with a manufacturer suggested retail price of USD $310 and discontinued a year later. The main features of the Pioneer CT-S670D are: 3 heads and off-tape monitoring, digital linear tape counter with 4 digits, automatic tape type selection and capable of handling normal, chrome and metal tapes, belt driven single-capstan transport. Typical front loading cassette deck with the cassette compartiment located on the center of the deck. Tape loading/unloading is operated motorized and the cassette needs to be placed with the side to be played facing forward in the cassette well. Level meters used on the CT-S670D are generic digital peak reading meters with peak hold for easy adjustment of optimum recording level. Full-logic transport controls used on the CT-S670D let it respond to the slightest finger contact for fast and effortless transport function selection. To ensure the best response from the wide variety of tapes available adjustment of, bias, equalization and sensitivity, to optimum levels can be performed prior to recording. Dolby C-type used in the CT-S670D provides 20 dB of noise reduction above about 1,000 Hz, fully doubling the amount given by B-type. The Dolby HX PRO system provides precise bias control during recording to reduce distortion and improve linearity in the high-frequency range, the result is recorded sound that is highly faithful to the original. For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable. -  Advanced 3-Head System -  20bit A/D - D/A Converter -  Super Auto BLE XD -  Digital Processing System -  ALCA (Auto Level Control with Tape Analysis) -  Legato Link Conversion -  FLEX (Frequency Level Expander) Stereo Cassette Deck (1998)  (1 review) Specifications Type: 3-head, single compact cassette deck Track System: 4-track, 2-channel stereo Tape Speed: 4.75 cm/s Heads: 1 x combination record/playback, 1 x erase Motor: 1 x reel, 1 x capstan, 1 x assist Tape Type: type I, CrO2, Metal Noise Reduction: B, C, HX Pro, Digital NR Frequency Response: 20Hz to 21kHz  (Metal tape) Signal to Noise Ratio: 90dB  (Digital NR) Wow and Flutter: 0.05% Total Harmonic Distortion: 0.6% Input: 100mV (line) Output: 0.5V (line) Dimensions: 420 x 128 x 277mm Weight: 4.5kg Year: 1998 Note: digital optical input

ampli pioneer sa-608 et tuner tx-608l de 1979 en superbe état de marche et esthetique... révision effectué: changement de 2 ampoule du tuner potentiomètre et sélecteur révisé et nettoyer plusieurs condensateur changer dons les 2 capa de gestion du vu mètre bleu le reste tester a l ESR test des résistances et des diodes rapide tous est ok au spec d origine nettoyage complet intérieur, extérieur test des courant de repos...etc COMME NEUF Il s'agit d'un appareil très bien équilibré, subtil et doté d'un timing exceptionnel; chaleureux et puissant il se mariera avec de très nombreuses enceintes. Specifications amplificateur Power output: 45 watts per channel into 8Ω (stereo) Frequency response: 10Hz to 50kHz Total harmonic distortion: 0.02% Damping factor: 30 Input sensitivity: 2.5mV (MM), 150mV (line) Signal to noise ratio: 78dB (MM), 100dB (line) Output: 150mV (line) Speaker load impedance: 4Ω to 16Ω Semiconductors: 7 x IC, 23 x transistors, 17 x diodes Dimensions: 451 x 151 x 271mm Weight: 8.3kg Year: 1979 Specifications tuner Type: Mono/Stereo Tuner Tuning Bands: FM, MW Tuning Scale: Analogue Sensitivity: 1.9uV (FM), 300uV (MW) Signal to Noise Ratio: 74dB (FM), 50dB (MW) Distortion: 0.15% (FM) Selectivity: 60dB (FM), 35dB (MW) Frequency response: 20Hz to 15kHz (FM) Output: 650mV (FM) Semiconductors: 3 x IC, 1 x FET, 8 x transistors, 15 x diodes Dimensions: 451 x 151 x 284mm Weight: 5.3kg idem marantz harman kardon NAD kef focal infinity B&W Yamaha sony pioneer denon micromega Rotel Onkyo sansui bose cambridge mc intosh luxman thule bc acoustic etc...

AKAI AM-2350 Stereo Integrated Amplifier + AKAI AT-2250L FM/AM Stereo Tuner  AKAI AM-2350 Stereo Integrated Amplifier Puissance de sortie: 35 watts par canal en 8Ω (stéréo) Réponse en fréquence: 20 Hz à 20 kHz Distorsion harmonique totale: 0,2% Facteur d'amortissement: 30 Sensibilité d'entrée: 3 mV (MM), 150 mV (DIN), 150 mV (ligne) Rapport signal / bruit: 75 dB (MM), 95 dB (ligne) Séparation des canaux: 50 dB (MM), 55 dB (ligne) Sortie: 150 mV (ligne), 30 mV (DIN) Impédance de charge des haut-parleurs: 4Ω à 16Ω Semi-conducteurs: 16 x transistors, 13 x diodes, 2 x IC Power output: 35 watts per channel into 8Ω (stereo) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.2% Damping factor: 30 Input sensitivity: 3mV (MM), 150mV (DIN), 150mV (line) Signal to noise ratio: 75dB (MM), 95dB (line) Channel separation: 50dB (MM), 55dB (line) Output: 150mV (line), 30mV (DIN) Speaker load impedance: 4Ω to 16Ω Semiconductors: 16 x transistors, 13 x diodes, 2 x IC AKAI AT-2250L FM/AM Stereo Tuner  Type: Tuner mono / stéréo Bandes d'accord: FM, MW Échelle de réglage: analogique Plage de syntonisation FM: 87,5 à 108 MHz Plage de réglage MW: 520 à 1605 kHz Sensibilité: 1,9uV (FM), 100uV (MW) Rapport signal / bruit: 70 dB (FM), 55 dB (MW) Distorsion: 0,2% (FM) Sélectivité: 65 dB (FM), 30 dB (MW) Sortie: 500mV (FM), 500mV (MW) Semi-conducteurs: 6 x transistors, 7 x diodes, 1 x FET, 3 x IC Type: Mono/Stereo Tuner Tuning Bands: FM, MW Tuning Scale: Analogue FM Tuning Range: 87.5 to 108 MHz MW Tuning Range: 520 to 1605 kHz Sensitivity: 1.9uV (FM), 100uV (MW) Signal to Noise Ratio: 70dB (FM), 55dB (MW) Distortion: 0.2% (FM) Selectivity: 65dB (FM), 30dB (MW) Output: 500mV (FM), 500mV (MW) Semiconductors: 6 x transistors, 7 x diodes, 1 x FET, 3 x IC BON ETAT!!! TRÈS PROPRE! Vous pouvez également acheter un magnétophone et des meubles, comme sur la dernière photo. Voir les autres ventes!!! Les photos sont la partie de la description. Vous achetez ce que vous voyez. Pour toutes questions ou photos supplémentaires, n'hésitez pas à me contacter. Magnétophone et meubles à vendre séparément. Attention! Le prix de la livraison varie en fonction du pays.  Demandez-moi le prix de la livraison, s'il vous plaît. Ask for shipping costs. Shipping to the islands is more expensive.

VENDS AMPLI TUNER MARANTZ 2250 B + SON TRANSFORMATEUR 110 V/220 VOLTS AMPLI MARANTZ 2250 B AVEC TOUTES SES FONCTIONS EN PARFAIT ÉTAT DE MARCHE. TOUS LES ÉCLAIRAGES FONCTIONNENT. CET AMPLI MARANTZ EST UN AMPLI AMÉRICAIN QUI EST EN 110 VOLTS, CELUI CI MARCHE TRÈS BIEN AVEC UN TRANSFORMATEUR 220 VOLTS QUI EST COMPRIS DANS VOTRE ACHAT (TRANSFO DE QUALITÉ VOIR PHOTOS). CET AMPLI D'OCCASION COMPORTE QUELQUES TRACES D'USURES D'USAGES. ENVOI DE L'AMPLI PAR LA POSTE EN COLISSIMO RECOMMANDÉ. (COMPRIS DANS LE PRIX D'ACHAT) ENVOI SOIGNÉ AVEC PAPIER BULLES, POLYSTYRENE ET CARTON RENFORCÉ L'AMPLI AVEC SON EMBALLAGE PÈSE  25 KG. BON ACHAT A TOUS VOIR DESCRIPTIF COMPLET DU CONSTRUCTEUR CI DESSOUS: Général: Designed in USA Manufactured In Japan First Year 1976 Last Year 1977 Blue Face Yes Channels Two Speaker Connections two sets Amplifier: RMS Power Per Channel 50 Impedance 8 ohms Total Harmonic Distortion (THD).25 % Power Bandwidth 20 Hz to 20 KHz Frequency Response 20 Hz to 20 KHz +/- 0.5 % Intermodulation Distortion (IM).25% at rated power Input Impedance 30 k ohm Input Sensitivity for Full Output 1.5v FM Tuner AM Tuner: Gyro Tuning yes RF Sensitivity 1.9 uV 300 Ohm Binding Posts Spring connectors 75 Ohm Binding Posts Spring connectors Signal Strength Meter Yes Center Tuning Meter Yes Stereo Lamp Yes Dolby Lamp Yes Illuminated Dial Pointer Yes Amplifier: Multiple Bass Adjustments Yes Multiple Midrange Adjustments Yes Multiple Treble Adjustments Yes Tone Control Defeat Yes Bass Turnover Options Yes Treble Turnover Options Yes High Filter Yes Low Filter Yes Gain Control Yes Loudness Contour Yes Mono Yes Balance Slider Number of Tape Monitors Two Tape to Tape Dubbing Via front panel Auxillary Input Source Yes Phono Input Source Yes Illuminated Source Indicators Yes Cartridge Load 47 k ohm Tuner Source Input am, fm Source Tape Input (as opposed to a tape monitor) yes 2nd Source Tape input (as opposed to a tape monitor) yes Tape Monitor yes 2nd Tape monitor yes Preamp to Amplifier Jumper(s) yes Headphone Jack(s) Yes Speaker Selection Nomenclature main, remote

For sale Oppo HA-1 DAC & headphone amplifier. The amplifier has been very well taken care of (still has the original screen protection film) and is in very good condition (minor imperfection in the upper right corner next to potentiometer - hardly visible, check pics). Exquisite build and fantastic quality. Included:  - Oppo HA-1 DAC & headphone amplifier  - Remote control  - Power cord (EU)  - USB cable  - SPDIF coaxial cable The item will be carefully packed and sent via tracked and insured shipping. HIGH PERFORMANCE AUDIO - Discrete Class A Amplifier A Class A amplifier conducts signal over the entire range of the input signal cycle. The output transistors are biased to operate in their most linear range, and there is no crossover distortion caused by switching the signal between two push-pull devices. The HA-1's power amplification circuit for the headphones is Class A built with discrete transistors. The discrete design allows us to hand-pick and match the best parts to build the HA-1. - Toroidal Power Supply A toroidal power transformer offers superior power efficiency and much lower exterior magnetic fields over traditional laminated steel core transformers. The HA-1's toroidal linear power supply provides a very clean and robust power source to the audio components. - Fully Balanced Design The internal analog audio signal path of the HA-1 is fully balanced. For digital audio, the signal runs in balanced mode all the way from the DAC to the output jacks. Balanced analog input is kept intact, and single-ended input is converted to balanced at the input buffer. All single-ended outputs are derived from the balanced signal as well. The balanced design provides better common-mode noise rejection and improves signal quality. The balanced headphone output provides twice the voltage and four times the power of the single-ended output, enabling the HA-1 to drive the most power hungry headphones. It also provides better channel seperation by eliminating the common ground return path. - ESS Sabre32 Reference DAC The DAC is one of the most important components for digital audio playback. The SABRE32 Reference ES9018 from ESS Technology is the world’s best performing 32-bit audio DAC solution targeted for high-end consumer applications and professional studio equipment. With the ESS patented 32-bit Hyperstream™ DAC architecture and Time Domain Jitter Eliminator, the SABRE32 Reference DAC delivers an unprecedented DNR (Dynamic Range) of up to 135dB and THD+N (Total Harmonic Distortion plus Noise) of -120dB, the industry’s highest performance level that will satisfy even the most demanding audio enthusiast. To learn more about the technologies behind the exceptional performance of the SABRE DAC, please read the SABRE Technical White Paper. OPPO HA-1 4.3" information display - Clean Signal Path The HA-1 uses an analog potentiometer (the familar volume knob) to control the volume. By avoiding re-digitizing the audio signal for volume adjustment, the HA-1 provides a clean signal path for the audio. At the same time, the convenience of modern digital volume control is not lost - a remote-controlled motor turns the volume knob and a 10-bit analog-to-digital converter samples the signal to display a numeric dB level. - Made for iPod®, iPhone® and iPad® The HA-1 passes Apple's "MFi" certification and is compatibile with the latest iPod, iPhone and iPad to be used as the digital audio output accessory of these devices. By tapping directly into the digital audio signal of these devices and converting the audio to analog using the high performance SABRE32 Reference DAC, music from your favorite portable device will sound its best. - Wireless Audio via Bluetooth The HA-1 supports Bluetooth Advanced Audio Distribution Profile (A2DP) with both the standard and aptX® high quality codec. Simply pair your phone with the HA-1 and set music free