Peak for

Filtre polarisant de marque GOBE pour objectif de 77mm de diamètre. Qualité maximum de la gamme (3 peak) ----------------------- GOBE polarizing filter for 77mm diameter lens. Maximum quality of the range (3 peak)

SmallRig L Bracket for Panasonic Lumix S1 and S1R - APL2354 Très bon état // Very good condition ------------------- SmallRig L-Bracket for Panasonic Lumix DC-S1 and S1R APL2354 Key Features: 1. Modular Designed for Panasonic Lumix DC-S1 and S1R. 2.Arca-Type Plate with Center Marks on Both Axis. 3.Built-in Flat Screw Driver. 4.1/4”-20 Accessory Threads & Integrated Slot for carrying Strap. 5.Extendable Side Plate for Tethering or Cable Release. 6.Compatible with SmallRig Lens Adapter Support for Sigma MC-21 BSA2355. SmallRig L-Bracket for Panasonic Lumix DC-S1 and S1R APL2354 is modular designed with anti-twist flanges to keep the camera from twisting and provide accessory mounting threads. Both the base plate and side plate are Arca-type compatible dovetails enable the camera to mount in a vertical or horizontal position. Each axis features a sensor centering line to align the camera on a tripod head. It secures on the bottom of the camera via a 1/4”-20 screw and features a locating pin to prevent twisting. The L plate features multiple 1/4"-20 threaded holes on the side and bottom for accessory attachment such as Cold Shoe 1593 and Manfrotto QR Plate 1280. The side plate can be extended 30mm if more room is needed for tethering or cable release. Additionally, the bottom features strap hole for Peak Design strap and a flat screwdriver allows installing the L bracket in seconds. Designer: Tracy Joy Compatibility:  Panasonic Lumix DC-S1 and S1R Package Includes:  1 x L Bracket Product Dimensions: 123.2 x 102.4 x 47.8mm Package Dimensions: 160 x 120 x 68mm Net Weight: 164g Package Weight: 240g Material(s): Aluminum Alloy

Nikon Nikkormat EL 35mm SLR film camera body. Sold for parts or repair as it is in poor condition. Exterior: Top of case is badly dented,. Other general signs of wear and tear, and quite dirty  Shutter/film transport: Fires and winds on without any obvious problems. Shutter curtain looks OK. Electrical: When checked with a battery the meter works Viewfinder/focusing screen: Lots of dust. Doesn't seem to be affected by the damage to the top of the body.  Lens mount: Lenses can be mounted, but the aperture coupling mechanism seems to be faulty and stuck in the wrong place. Film chamber: needs to be cleaned, needs new seals, pressure plate OK. No other functions checked, not tested with film.  For items sold for 'parts or repair' - I try to give a good description of any faults I find, but it is not always possible to give a complete list, and there will sometimes be other problems not described in the listing. Please be aware of that before buying.   I often have similar or compatible items for sale, see my shop for details. Please contact me via messages if you have any questions, I’m happy to give advice. Livraison en France Cet article sera livré par Relais Mondial Relay ou Colissimo Recommandé, selon votre sélection à la caisse.  International shipping I can ship this item to any location listed in the postage section of this listing. It will be sent tracked by Colissimo or Mondial Relay, depending on the item and destination. International delivery from France will usually take approximately five to seven working days, but it can occasionally be longer, especially at peak times. Please be aware of this before buying. Any import tax/duties in your country must be paid by the buyer. I try to photograph and describe my items as accurately as possible, and I package them very carefully, however in the unlikely event of a problem please let me know immediately and I will resolve it.

Komura Telemore 2x Teleconverter for Mamiya RB67, with case and caps. In poor optical condition, there is fungus, dust and various other blemishes. When tested it is mechanically functional and looks sharp through the viewfinder. However the optical performance is likely to be impaired due to the condition. For items sold for 'parts or repair' - I try to give a good description of any faults I find, but it is not always possible to give a complete list, and there will sometimes be other problems not described in the listing. Please be aware of that before buying. I often have similar or compatible items for sale, see my shop for details. Please contact me via messages if you have any questions, I’m happy to give advice. Livraison en France Cet article sera livré par Relais Mondial Relay ou Colissimo Recommandé, selon votre sélection à la caisse.  International shipping I can ship this item to any location listed in the postage section of this listing. It will be sent tracked by Colissimo or Mondial Relay, depending on the item and destination. International delivery from France will usually take approximately five to seven working days, but it can occasionally be longer, especially at peak times. Please be aware of this before buying. Any import tax/duties in your country must be paid by the buyer. I try to photograph and describe my items as accurately as possible, and I package them very carefully, however in the unlikely event of a problem please let me know immediately and I will resolve it.

Canon Powerhsot SX280 HS digital camera, with battery and charger. No other accessories included. Faulty, sold for parts or repair.  This camera does not turn on, even after the battery has been charged. It has light general signs of use but no signs of physical damage, and no corrosion in the battery chamber. The screen has some light marks but look OK overall. The battery (a genuine Canon one) seems to charge OK on the charger, it flashes as normal until fully charged, but the camera does nothing when you try to turn it on. This is as far as I can test it. I have no idea if it would be a simple or expensive repair. For items sold for 'parts or repair' - I try to give a good description of any faults I find, but it is not possible to give a complete list, and there will sometimes be other problems not described in the listing. Please be aware of that before buying. I often have similar or compatible items for sale, see my shop for details. Please contact me via messages if you have any questions, I’m happy to give advice. Delivery in France All items are sent by La Poste/Colissimo or Mondial Relay, depending on your choice at the checkout.  International shipping I can ship this item to any location listed in the postage section of this listing. I use La Poste, Colissimo, Chronopost, UPS or Mondial Relay, depending on the item and destination. International delivery from France will usually take approximately 5 to 7 working days, but it can occasionally be longer, especially at peak times. Please be aware of this before buying. Any import tax/duties in your country must be paid by the buyer. Tracking All items are sent tracked, with insurance where applicable. You will find the tracking number and delivery company used next to your item in 'My ', once it has been dispatched. You can track it through, but often the tracking will be more accurate and up-to-date on the website of the delivery company itself, so it's always better to look there. I try to photograph and describe my items as accurately as possible, and I package them very carefully, however in the unlikely event of a problem please let me know immediately and I will resolve it.

Mamiya Focusing knob adapter wheel for the RB67 Pro, Pro S and Pro SD. In very good condition, with minor signs of wear. This wheel simply fits over the top of the existing focusing knob, allowing for quicker and more precise focusing.  I often have similar or compatible items for sale, see my other items for details. Please contact me via messages if you have any questions, I’m happy to give advice. Livraison en France Cet article sera livré par Relais Mondial Relay ou Colissimo Recommandé, selon votre sélection à la caisse.  International shipping I can ship this item to any location listed in the postage section of this listing. It will be sent tracked by Colissimo, UPS or Relais Mondial Relay depending on the item and destination. International delivery from France will usually take approximately five to seven working days, but it can occasionally be longer, especially at peak times. Please be aware of this before buying. Any import tax/duties in your country must be paid by the buyer. UK delivery/Brexit UK buyers please be aware, due to Brexit there may be delivery delays and import duties payable from now on. Any duties must be paid by the buyer. Items will be sent tracked by UPS or Colissimo, depending on the size/value.  I try to photograph and describe my items as accurately as possible, and I package them very carefully, however in the unlikely event of a problem please let me know immediately and I will resolve it.

iFi Audio Pro iESL Headphone Amp for Electrostatic Headphones.  The Pro Series iESL electrostatic headphone amplifier from iFi AUDIO offers transparency and an ultra-wide frequency range. It works with all Stax, Sennheiser Orpheus, and electrostatic headphones. Drive Your Electrostatic Headphones to the Max and Use with a Headphone Amp: iFi Pro iESL Energizer Charges Your 'Phones, Supplies Needed Extra Voltage, Yields Incredible Transparency Drive your electrostatic headphones with the iFi Pro iESL Electrostatic Headphone Energizer and experience the phenomenal transparency, ultra-wide dynamics, and natural musicality for which the style is renowned. Offering perfect bias, impedance, and termination matching with every electrostatic ‘phone around, Pro iESL paired with a high-end headphone amplifier supplies the proper extra-high-tension voltage required by electrostatic headphones – something conventional amplifiers cannot offer. Pro iESL "energizes" the electrostatic plates in your ‘phones, giving them the power they need to operate at peak potential. A hand-wound permalloy core transformer, capacitive battery supply, and bias voltage generator do the work so all you have to do is listen to what you've been missing. iFi Pro iESL is the flagship your electrostatic need and deserve. 100% Music Direct Guaranteed. Please note: iFi Pro iESL is strictly for use with electrostatic headphones and needs to be paired with a headphone amplifier. Maximum Output voltage:   640V RMS (16Ω/20V in)  320V RMS (64Ω/20V in) Frequency Response: 5Hz-50kHz (-3dB) Input Voltage (Pro iESL): 5V-9V/1A max Input Voltage (iPower): AC 85-265V, 50/60Hz Power Consumption: < 1W Dimensions (DWH): 8.4" x 8.1" x 2.5" Weight: 5.5 lbs.  Bought in 09/2019 - Mint Condition -  Sold with full set of accessories and original box.  Still under Manufacturer Warranty (IFI Audio)

Minolta 50mm f1.7 autofocus prime lens, for Sony/Minolta A mount. With original Minolta front and rear caps. This will fit Minolta A-mount 35mm film SLRs and Sony A-mount DSLRs. It will NOT fit the Sony Alpha mirrorless cameras (eg. A7 and A6000 series, Nex etc), unless used with an adapter. It's a full-frame lens.  This lens is in good external condition with some minor signs of wear and age. The glass is in very good condition, it's clean, clear unscratched, and free of haze and fungus. As with any used lens there are a few small specks of dust internally. The aperture blades are clean and free of oil and the iris is snappy. The filter ring thread works well and the built-in hood is functional. Tested and in full working order, producing sharp results.  I often have similar or compatible items for sale, see my shop for details. Please contact me via messages if you have any questions, I’m happy to give advice. Livraison en France Cet article sera livré par Relais Mondial Relay ou Colissimo Recommandé, selon votre sélection à la caisse.  International shipping I can ship this item to any location listed in the postage section of this listing. It will be sent tracked by Colissimo or Mondial Relay, depending on the item and destination. International delivery from France will usually take approximately five to seven working days, but it can occasionally be longer, especially at peak times. Please be aware of this before buying. Any import tax/duties in your country must be paid by the buyer. I try to photograph and describe my items as accurately as possible, and I package them very carefully, however in the unlikely event of a problem please let me know immediately and I will resolve it.

Durst metal lens board for longer focal length lenses. 78mm diameter and 25mm depth, with 39mm diameter screw thread, but please note, this is not standard M39 thread, it's a different pitch which seems to fit many Durst branded enlarger lenses, but not regular 39mm thread enlarger lenses. There are some minor dents in the sides, but otherwise in good condition. I often have similar or compatible items for sale, see my shop for details. Please contact me via messages if you have any questions, I’m happy to give advice. Livraison en France Cet article sera livré par Relais Mondial Relay ou Colissimo Recommandé, selon votre sélection à la caisse.  International shipping I can ship this item to any location listed in the postage section of this listing. It will be sent tracked by Colissimo, UPS or Relais Mondial Relay depending on the item and destination. International delivery from France will usually take approximately five to seven working days, but it can occasionally be longer, especially at peak times. Please be aware of this before buying. Any import tax/duties in your country must be paid by the buyer. UK delivery/Brexit UK buyers please be aware, due to Brexit there may be delivery delays and import duties payable from now on. Any duties must be paid by the buyer. Items will be sent tracked by UPS or Colissimo, depending on the size/value.  I try to photograph and describe my items as accurately as possible, and I package them very carefully, however in the unlikely event of a problem please let me know immediately and I will resolve it.

Minolta 75-300mm f4.5-5.6 autofocus zoom lens, for Sony/Minolta A mount. With original Minolta front and rear caps and matched Minolta lens hood. This will fit Minolta A-mount 35mm film SLRs and Sony A-mount DSLRs. It will NOT fit the Sony Alpha mirrorless cameras (eg. A7 and A6000 series, Nex etc), unless used with an adapter. It's a full-frame lens.  This lens is in excellent external condition with light signs of use. The glass is superb, it's clean, clear and unscratched, and free of haze and fungus. As with any used lens there may be a few minute specks of dust internally. The aperture blades are clean and free of oil and the iris is snappy. The zoom and focus barrels move smoothly. Tested, producing sharp images, the focus works well in manual and auto modes. I often have similar or compatible items for sale, see my shop for details. Please contact me via messages if you have any questions, I’m happy to give advice. Delivery in France This item will be sent by Colissimo or Mondial Relay, depending on your choice at the checkout.  International shipping I can ship this item to any location listed in the postage section of this listing. All items are sent tracked and insured. I use Colissimo, Chronopost, UPS or Mondial Relay, depending on the item and destination. International delivery from France will usually take approximately 5 to 7 working days, but it can occasionally be longer, especially at peak times. Please be aware of this before buying. Any import tax/duties in your country must be paid by the buyer. I try to photograph and describe my items as accurately as possible, and I package them very carefully, however in the unlikely event of a problem please let me know immediately and I will resolve it.

Hasselblad X-Pan lens hood for the 45mm and 90mm lenses. In good condition, with some minor signs of wear, in good working order. This is the later version with the locking catch. I often have similar or compatible items for sale, see my shop for details. Please contact me via messages if you have any questions, I’m happy to give advice. Delivery in France All items are sent by La Poste/Colissimo or Mondial Relay, depending on your choice at the checkout.  International shipping I can ship this item to any location listed in the postage section of this listing. I use La Poste, Colissimo, Chronopost, UPS or Mondial Relay, depending on the item and destination. International delivery from France will usually take approximately 5 to 7 working days, but it can occasionally be longer, especially at peak times. Please be aware of this before buying. Any import tax/duties in your country must be paid by the buyer. Tracking All items are sent tracked, with insurance where applicable. You will find the tracking number and delivery company used next to your item in 'My ', once it has been dispatched. You can track it through, but often the tracking will be more accurate and up-to-date on the website of the delivery company itself, so it's always better to look there. I try to photograph and describe my items as accurately as possible, and I package them very carefully, however in the unlikely event of a problem please let me know immediately and I will resolve it.

AKAI AMX6 Mélangeur De Puissance AMP. 1 - HI/MID/LOW EQUALIZER: Powerful 15dB boost or cut allows you to tailor the sound of each individual channel so the instrument blends more naturally in the mix. The HIGH EQ is a 12 kHz shelving type to add or cut b'"'sizzleb'"'. MID has a center frequency of 1.2 kHz, approximately in the vocal range. The LOW EQ is an 80 Hz shelving type, around the kick-drum frequency. 2 - EFFECT SEND (REV/FX): Controls the level of the signal sent to the internal digital effects and the FX SEND bus. This control comes after the LEVEL control, so the signal sent to internal or external effects will also be affected by changes in the LEVEL setting. 3 - MONITOR: Controls the level of the signal sent to the MONITOR bus and MONITOR OUT jack. This control is independent of the LEVEL control and is not affected by it. This means you can create a completely separate mix for on-stage monitoring. 4 - LEVEL: Controls the level of the input signal sent to the MAIN bus. Generally used for creating the mix sent to the audience. 5 - LINE/MIC INPUTS (Channels 1-4): Use the LINE input for instruments that provide line level signals such as synthesizers or drum machines. Use the MIC input for low level signal sources such as microphones. +48V phantom power is available for use with condenser microphones. You can also use both LINE and MIC inputs simultaneously for each channel. 6 - LINE/MIC INPUTS (Channels 5-6): LINE input functions as channels 1-4. LINE/MIC input accepts both XLR and phone jacks. You can connect a stereo signal to both phone jacks (LINE and MIC/LINE) for summing to a mono signal. 7 - DIGITAL EFFECTS: A selection of 16 powerful digital reverb and delay effects to add extra ambiance to your music. A foot switch may be used to turn the digital effects on/off for dramatic sonic changes while playing, and the green indicator lights when the effects are on. 8 - PHANTOM: Turns +48V phantom power on/off for condenser microphones connected to the MIC inputs of channels 1-6. The green indicator lights when phantom power is on. 9 - FX SEND: Controls the combined level of signals sent from the FX SEND bus to an external effects processor connected to the FX SEND jack. This control has no effect on the signal level sent to the built-in digital effects. 10 - TAPE/AUX IN LEVEL: Lets you adjust the level sent to the MAIN bus from the TAPE IN/AUX IN connectors. 11 - MAIN/BRIDGED SECTION: Graphic equalizer +/-12dB 7-band graphic equalizer adjusts the EQ curve of the MAIN bus signal sent to the AMP 1 A/B speakers. Use it to compensate for poor acoustics in a hall or to prevent feedback. REV/FX: Adjusts the built-in digital effects level sent to the MAIN bus. Set to b'"'0b'"' (or use a foot switch) to turn effects off. LEVEL: Controls the output level of the MAIN bus signal sent to the MAIN OUT jack and the internal AMP 1. Peak level indicators: Provides visual indication of the signal level at the MAIN OUT jack and AMP 1 input. 12 - MONITOR SECTION: Graphic equalizer +/-12dB 7-band graphic equalizer adjusts the EQ curve of the MONITOR bus signal sent to the AMP 2 A/B speakers. Use it to compensate for poor acoustics in a hall or on stage, or to prevent feedback. REV/FX: Adjusts the built-in digital effects level sent to the MONITOR bus. Set to b'"'0b'"' (or use a foot switch) to turn effects off. LEVEL: Controls the output level of the MONITOR bus signal sent to the MONITOR OUT jack and the internal AMP 2. Peak level indicators: Provides visual indication of the signal level at the MONITOR OUT jack and AMP 2 input. 13 - MODE: Allows you to select signal routing to the internal amplifiers. MAIN TO AMP 1/MONITOR TO AMP: Gives you a 200 watts mono MAIN (audience) mix and a separate 200 watts mono MONITOR (on-stage) mix, without the need for any external amplifiers. MAIN TO AMP 1 b'&' 2: Allows you to send a 200 watts per channel, 2- or 4-speaker mono mix to the audience. You can also have a separate on-stage mix by connecting another amplifier En savoir plus Collaboration commerciale.

Parfait  état, fonctionnement parfait testé, sera très solidement emballé. Peut être envoyé de france Suisse vers Suisse 14 Frs en recommandé Pour pays hors Europe me contacter pour les frais d'envoi  Bonnes enchères  This Pioneer CT-S670D is a stereo cassette deck with Dolby B/C and HX-Pro noise reduction, it was first sold by Pioneer in 1997 with a manufacturer suggested retail price of USD $310 and discontinued a year later. The main features of the Pioneer CT-S670D are: 3 heads and off-tape monitoring, digital linear tape counter with 4 digits, automatic tape type selection and capable of handling normal, chrome and metal tapes, belt driven single-capstan transport. Typical front loading cassette deck with the cassette compartiment located on the center of the deck. Tape loading/unloading is operated motorized and the cassette needs to be placed with the side to be played facing forward in the cassette well. Level meters used on the CT-S670D are generic digital peak reading meters with peak hold for easy adjustment of optimum recording level. Full-logic transport controls used on the CT-S670D let it respond to the slightest finger contact for fast and effortless transport function selection. To ensure the best response from the wide variety of tapes available adjustment of, bias, equalization and sensitivity, to optimum levels can be performed prior to recording. Dolby C-type used in the CT-S670D provides 20 dB of noise reduction above about 1,000 Hz, fully doubling the amount given by B-type. The Dolby HX PRO system provides precise bias control during recording to reduce distortion and improve linearity in the high-frequency range, the result is recorded sound that is highly faithful to the original. For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable. -  Advanced 3-Head System -  20bit A/D - D/A Converter -  Super Auto BLE XD -  Digital Processing System -  ALCA (Auto Level Control with Tape Analysis) -  Legato Link Conversion -  FLEX (Frequency Level Expander) Stereo Cassette Deck (1998)  (1 review) Specifications Type: 3-head, single compact cassette deck Track System: 4-track, 2-channel stereo Tape Speed: 4.75 cm/s Heads: 1 x combination record/playback, 1 x erase Motor: 1 x reel, 1 x capstan, 1 x assist Tape Type: type I, CrO2, Metal Noise Reduction: B, C, HX Pro, Digital NR Frequency Response: 20Hz to 21kHz  (Metal tape) Signal to Noise Ratio: 90dB  (Digital NR) Wow and Flutter: 0.05% Total Harmonic Distortion: 0.6% Input: 100mV (line) Output: 0.5V (line) Dimensions: 420 x 128 x 277mm Weight: 4.5kg Year: 1998 Note: digital optical input

Enceintes Hi-Fi d’excellente qualité, marque réputée auprès des connaisseurs audiophiles.  Retranscription du son haut de gamme, la renommée Tannoy n'est plus à faire. Achetées en 1988 (facture à l’appui) elles sont en excellent état, les boiseries sont parfaites j'en ai pris grand soin. Le prix est pour l'ensemble soit: Les deux enceintes avec leurs supports/pieds Haute Fidélité. Pas d’envoi à venir chercher sur Paris. Idem au modèle Stirling Technical Specifications Power Rating 75W RMS, 150 Peak Amplifer Rating 20 to 100W RMS per channel, 8 Sensitivity 90dB for 1 watt at 1 metre. (Anechoic,4PI environment) Maximum SPL 109dB at 1m for 75W, 112dB at 1m for 150 peak Ompedance 8 Nom./ 6 Min. Frequency vs SPL 45Hz-20kHz  3dB (Port Open) Phase Response 120Hz – 10 kHz  25 Time Compensation   30Secs, 120Hz – 10khz Dispersion 90incl.angle, hor.and vert. for  6dB at 10 kHz Crossover Frequency 1.8kHz Crossover Control Constant impedance attenuator from  to +4dB, 2kHz to 20kHz Crossover Type Hard wired passive low loss time comp. Type 1052 Driver Type Dual Concentric, High Compliance Type 2008C Distorsion 0,5% third harm. For 90dB at 1 metre Enclosure Type Variable distributed port system Enclosure Volume 40 litres Enclosure Dimensions 580H x 380W x 275D (22.8“x 15“x 10.8“) Enclosure Weight 15Kg Enclosure Material Solid walnut with high density particle board Grille Metal  Specially woven cloth over wood frame  Low Frequency Radiator Nominal diameter 200mm, 8” Voice coil diameter 44mm, 1.7” Free air resonance 35Hz Total Q 0,47 High Frequency Compression Driver Diaphragm diameter 17mm, 0.7” Voice coil diameter 16mm, 0.6” Horn lower cut off freq 800Hz

Tout neuf!  JAMO est une marque danoise d'excellence!  JAMAIS UTILISÉ!  CONDITION PARFAITE!  TESTÉ, FONCTIONNE PARFAITEMENT!  PAS DE RAYURES, PAS DE DOMMAGES!  TOUT EN PHOTO!  PEUT ÊTRE ACHETÉ SÉPARÉMENT PAR PAIRES UNIQUEMENT!  Prix ​​original 699 €  Faites une offre et c'est à vous!  Ils sont lourds mais peuvent être emballés et protégés pour l'expédition!  Faites-moi savoir vos préférences d'expédition pour un devis d'expédition.  Le ramassage est le bienvenu en personne ou par coursier. Brand new!  JAMO is a Danish brand of excellence!  NEVER USED!  PERFECT CONDITION!  TESTED, WORKS PERFECTLY! NO SCRATCHES, NO DAMAGE!  ALL IN PHOTO!  CAN BE PURCHASED SEPARATELY IN PAIRS ONLY!  Original price € 699  Make an offer and it's up to you!  They are heavy but can be packed and protected for shipping!  Let me know your shipping preferences for a shipping quote.  Pickup is welcome in person or by courier. Technical characteristics S406 tower speaker - System: 2-way bass-reflex - 165mm diameter bass / midrange driver - 25mm diameter tweeter - RMS / Peak powers: 80 W / 120 W - Impedance: 6 Ohms - Sensitivity: 90 dB - Bandwidth: 48 Hz - 20 kHz - Filter cutoff frequency: 4 kHz - Dimensions (W x H x D): 214 x 840 x 235 mm - Weight: 9.5 kg S40 center speaker - System: 2-way bass-reflex - RMS / Peak powers: 60 W / 100 W - Impedance: 6 ohms - Sensitivity: 89 dB - Bandwidth: 120 Hz - 20 kHz - Filter cutoff frequency: 4 kHz - Dimensions (W x H x D): 130 x 215 x 125 mm - Weight: 1.5 kg Surround speaker S40 - System: 2-way bass-reflex - RMS / Peak powers: 60 W / 100 W - Impedance: 6 ohms - Sensitivity: 89 dB - Bandwidth: 100 Hz - 20 kHz - Filter cutoff frequency: 4.5 kHz - Dimensions (W x H x D): 130 x 358 x 125 mm - Weight: 2.7 kg.

Micro testé et fonctionne bien. Le SM82 est un microphone à condensateur portable, autonome, unidirectionnel, contenant son propre amplificateur de niveau de ligne, son limiteur de crête et sa batterie. Il est conçu pour fournir une sortie de niveau ligne pour une utilisation dans une variété de situations de diffusion où un microphone de niveau ligne avec un limiteur intégré est nécessaire. Caractéristiques du microphone: Réponse en fréquence étendue pour une reproduction sonore exceptionnellement propre et naturelle Directivité cardioïde, uniforme avec la fréquence et symétrique autour de l'axe, pour fournir un rejet maximum et une coloration minimale du son hors axe La sortie de niveau de ligne équilibrée peut directement piloter les lignes téléphoniques ou d'autres entrées de niveau de ligne Le limiteur de crête intégré contrôle le niveau de sortie pour éviter la surcharge de l'amplificateur de ligne du microphone ou de l'équipement externe Condenseur cardioïde avec amplificateur de niveau de ligne et limiteur Réponse en fréquence 40 à 15 000 Hz Diagramme polaire Réponse cardioïde (unidirectionnelle) uniforme avec fréquence, symétrique autour de l'axe Impédance de sortie 250 ohms réelle (conçue pour une utilisation avec des charges de 600 ohms ou plus) Fonctionnement sur batterie 9.8V interne Alimentation fantôme sur une plage de 15V à 50V Passage automatique de l'alimentation fantôme à l'alimentation par batterie Le filtre anti-pop et anti-vent intégré protège du vent et des bruits de souffle explosifs Transducteur à condensateur unidirectionnel Le connecteur / commutateur de sortie active le microphone lorsque le connecteur du câble est inséré Micro tested and works well. The SM82 is a handheld, stand-alone, unidirectional condenser microphone containing its own line level amplifier, peak limiter and battery. It is designed to provide line level output for use in a variety of broadcast situations where a line level microphone with a built-in limiter is required. Microphone Specifications: Extended frequency response for exceptionally clean and natural sound reproduction Cardioid polar pattern, uniform with frequency and symmetrical about the axis, to provide maximum rejection and minimal coloration of off-axis sound Balanced line level output can directly drive line level inputs Built-in peak limiter controls the output level to avoid overloading the microphone line amplifier or external equipment Cardioid condenser with line level amplifier and limiter Frequency response 40 to 15,000 Hz Polar diagram Unidirectional cardioid response uniform with frequency, symmetrical about the axis 250 ohm output impedance (designed for use with loads of 600 ohms or greater) Internal 9.8V battery operation Phantom power in a range of 15V to 50V Automatically switch from phantom power to battery power Built-in pop and wind filter protects against wind and explosive blast sounds Unidirectional capacitor transducer The output connector / switch activates the microphone when the cable connector is inserted

Haut parleur 15" Selenium  15 PW3 SLF en bon état. Le cône est un peu enfoncé mais non percé et cela ne gène en rien son fonctionnement. Professional 15” woofer designed to meet a variety of PA needs for small and medium-sized rooms, with excellent performance in the mid and low frequency ranges.For sound reinforcement in nightclubs, dancing halls, auditoriums, bands and also for studio monitors.Its great efficiency in sound reproduction is due to the excellent combination of the different components:- The light cone manufactured with long fiber pulp together with a surround of impregnated fabric give the array great stability, high yield and low distortion.- The voice coil is made of high temperature wire, wound on ® Kaptonformer.- The epoxy painted reinforced steel frame provides thearray with high mechanical resistance.- The aluminum dust cap guarantees great voice coil heat dissipation.- The use of highly resistant adhesives guarantees optimal cohesion and durability of components.*15PW3-SLF: Product with black dull finished dust cap and without Selenium logo printed on it. SPECIFICATIONSNominal diameter.............................380 (15)mm (in)Nominal impedance..................................8ΩMinimum impedance @ 160 Hz.......................6.8ΩPower handling1Musical Program............................500W2AES......................................250WSensitivity (2.83V@1m) averaged from 100 to 2,000 Hz...98dB SPLPower compression @ 0 dB (nom. power)..............4.1dBPower compression @ -3 dB (nom. power)/2............2.5dBPower compression @ -10 dB (nom. power)/10..........0.6dBFrequency response @ -10 dB................40 to 4,000Hz12 AES Standard (60 - 600 Hz).THIELE-SMALL PARAMETERSFs...............................................37Hz3Vas........................................274 (9.67)l (ft)Qts.............................................0.61Qes............................................0.68Qms............................................5.81ηo (half space)...................................2.00%2 2Sd....................................0.08605 (133.4)m(in)3 3Vd (Sd x Xmax)...........................258.2 (15.76)cm(in)Xmax (max. excursion (peak) with 10% distortion)...3.0 (0.12)mm (in)Xlim (max.excursion (peak) before physical damage).9.5 (0.37)mm (in)Atmospheric conditions at TS parameter measurements:Temperature...................................27 (81)°C (°F)Atmospheric pressure............................1,000mbHumidity..........................................43%Thiele-Small parameters are measured after a 2-hour power test using half AES power. A variation of ± 15% is allowed.ADDITIONAL PARAMETERSβL.............................................12.3TmFlux density.....................................1.15TVoice coil diameter.............................60 (2.4)mm (in)Voice coil winding length......................17.5 (57.4)m (ft)Wire temperature coefficient of resistance (α25).....0.003681/°CMaximum voice coil operating temperature........215 (419)°C (°F)θvc (max.voice coil operating temp./max.power)..0.86 (1.68)°C/W(°F/W)Hvc (voice coil winding depth).................14.0 (0.55)mm (in)Hag (air gap height)...........................8.0 (0.32)mm (in)Re..............................................6.3ΩMms.....................................71.2 (0.157)g (lb)Cms...........................................265.3μm/NRms.............................................2.8kg/sNON-LINEAR PARAMETERSLe @ Fs (voice coil inductance @ Fs)...............2.475mHLe @ 1 kHz (voice coil inductance @ 1kHz)...........0.929mHLe @ 20 kHz (voice coil inductance @ 20 kHz)........0.384mHRed @ Fs.......................................0.11ΩRed @ 1 kHz.....................................2.31ΩRed @ 20 kHz..................................36.56ΩKrm...........................................0.728mΩKxm..........................................12.311mHErm...........................................0.922Exm.....

Vend mixette de reportage Sound Devices 442 + sacoche Petrol + 2 cables de connection camera 4 Balanced XLR Inputs The mixer's flexibility begins with it's 4 balanced XLR inputs. All 4 inputs are individually switchable to accept line or microphone level signals. Direct Outputs Every input features a dedicated output via TA3-male connectors. The direct outs are ideal for feeding individual channel signal to external devices. M-S Decoding Channels 1-2 can be linked for stereo capturing and M-S stereo monitoring. Channel 1 features a phase reverse switch. Variable Gain Continuously variable gain allows level contouring on every channel, resulting in higher signal to noise ratio. Variable Low-Cut Filter Continuously variable low-cut filter dials are located on each channel, eliminating low frequency noise between 80 - 240Hz Peak Limiting Input and output peak limiters eliminate signal over load that can cause noise and distortion.

SCHNEIDER SUPER-SYMMAR XL 4,5/80mm MC ASPHERIC - En Etat proche du NEUF / In near MINT condition  - Lentilles propres, claires, sans champignon, traces ni rayure / Lens clean, clear, without fungus, without scratch or cleaning marks. - Obturateur copal 0, fonctionne à toutes les vitesses / Copal 0 shutter, works at all speeds.  - Made in Germany - Pour chambre 4x5, 5x7 / For 4x5 and 5x 7 Large Format Cameras - Objectif grand angle équivalent 21 mm en 4x5 / Wide angle lens: 21mm equivalent in 4 x 5 Large format. - Piqué exceptionnel, larges possibilités de mouvement, lumineux / Tack Sharp lens, wide movement possibilities, luminous lens. - Avec bouchons d'objectif avant et arrière / Comes with front and rear genuine lens caps. - Avec Pare soleil grand angle 67mm / Comes with a 67mm filter thread wide angle lens hood - n° de l'objectif: 14992344 / Serial number of the lens: 14992344            SCHNEIDER Center-Filter IIIb (+ 400 € quand neuf/ when new) - En excellent Etat / In excellent condition  - Valeur: plus de 400 € quand neuf / More than 400 € when New. - Pare soleil grand angle 86mm / Comes with a 86mm filter thread wide angle lens hood Excellent +++ condition for the the Schneider Super-Symmar 80mm XL lens. Comes with the Schneider Center-Filter IIIb. The Schneider 80mm f/4.5 Super-Symmar XL Lens is a professional wide angle lens for the 4x5 format, which provides an angle of view on 4x5 which is similar to a 21mm lens in the 35mm format. The Super-Symmar XL lenses are the world's first aspherical lens design for large format, producing incredible peak sharpness with excellent correction for distortion and a small overall size. The 80mm f/4.5's large image circle allows plenty of creative control for the photographer-in fact, it has the largest image circle of any 80mm large format lens. Beyond the coverage, the lens' large f/4.5 maximum aperture helps to ease the difficulty of focusing the camera in poor light. The 80mm Super-Symmar XL's 105° angle of coverage permits a generous 34mm of all-direction shift on the 4x5 format, which is particularly beneficial when capturing a building from ground level. It can be mounted upon any view or field camera, thanks to its tiny 43mm diameter rear barrel which only extends 14.8mm behind the mount, allowing plenty of space between the rear of the barrel and the image plane for tilts and swings. The 80mm Super-Symmar XL uses 67mm filters, and for critical work with transparency film it is strongly recommended to use the dedicated #3b center filter. Extremely sharp ultra wide lens for professional results in the 4x5 format (can also be used upon 5x7 cameras). World's first aspherical lens design series for large format. Excellent correction of perspective distortion. Increased coverage to an extreme 105°. Bright f/4.5 maximum aperture allows easier focusing in subdued light. Largest image circle of any 80mm large format lens. Maximum image circle of 211mm allows ±34mm of rise/fall/shift (in both vertical/horizontal composition) for 4x5 format. Accepts 67mm filters. Standard-style Copal #0 shutter with calibrated aperture scale and maximum 1/500th speed Schneider Filter IIIb INCLUDED !!!(+ 400 € New) Schneider IIIb center filter for critical correction of light falloff + Lens hood for a wide angle with filter (86mm)

Welcome! For sale is Electro-Voice CPS4.10 apmlifier with 4 channels of each nominal output is 1000W. MSRP: 3200 US$ Amplifier was never used (just tested before i made this listing) and it is 100% operational. See more technical details below. Shipping We will ship to any location worldwide. Please send us message for shipping cost to your location. All customs fees are not included in the international shipping costs. Buyer is responsible for all customs fees.  Please contact us if you have any question regarding this item.  CPS4.10 This four-channel CPS amplifier from Electro-Voice features groundbreaking Class-D technology for maximum amp efficiency and minimized heat dissipation in 19-inch racks. Each channel individually provides transformerless, switchable output characteristics, which enable specific channels to achieve maximum drive. Power into 2 Ohms, 4 Ohms, 70V, or 100V line – no transformers are required. In Hi-Z operation (70V or 100V), a 50 Hz high-pass filter (HPF) provides protection against loudspeaker transformer saturation. Additionally, amplifier channels can be bridged in pairs for double output power. Each contractor-friendly, multi-channel CPS amplifier also features Phoenix-type connectors for inputs and outputs, pre-programmable power-on delay, easy power-on remote via contact closure, and rear level controls. A module slot for the RCM-810 remote control module provides control network functionality, allowing for remote system diagnostics and control via IRIS-Net software. In addition, using the RCM-810’s Variable Load Drive feature can tailor the amplifier’s output power to match every load from 2 Ohms up to 10 Ohms in steps of 0.1 Ohms. Features: - Class-D design for high-efficiency and low heat dissipation - Flexible matching for Low-Z and High-Z applications - Optional remote control via IRS-Net - Four-channel design in 2RU chassis Specifications: - Maximum Midband Output Power (THD=1%, 1kHZ): 4 x 1000W @ 2 ohms 4 x 1000W @ 4 ohms 4 x 1000W @ 70V 4 x 1000W @ 100V - Rated Output Power (THD 4 x 900W @ 2 ohms 4 x 900W @ 4 ohms 4 x 900W @ 70V 4 x 900W @ 100V  - Maximum Bridged Output Power (THD=1%, 1kHz) 2 x 2000W @ 4 ohms 2 x 2000W @ 8 ohms 2 x 2000W @ 140V 2 x 2000W @ 200V - Maximum RMS Voltage Swing (THD=1%, 1kHz, per channel): 100V - Power Bandwidth (THD=1% ref.1kHz, half power @ 4 ohms load): 10Hz-25kHz, 50Hz-25kHz  - Voltage Gain, ref. 1kHz: 32 dB (2ohm/4ohm mode), 33dB (70V mode), 36dB (100V mode)  - THD at rated output power (MBW=80kHz, 1kHz): - IMD-SMPTE, 60Hz, 7kHz: - DIM30, 3.15kHz, 15kHz: - Maximum Input Level: +21dBu - Crosstalk, ref. 1kHz at rated output power: - Frequency Response, ref. 1kHz: 10Hz-30kHz (+/-1dB) - Input Impedance, active balanced: 20k ohms - Damping Factor, 1khz, 8 ohms: >240 - Slew Rate: 28V/us - Output Noise, A-weighted: - Output Stage Topology: Class D - Power Consumption, 1/8 max. output power @ 4 ohms: 840W - Power Requirements: 220-240V, 50-60Hz or 120V, 50-60Hz or 100V, 50-60Hz - Protections: Audio Limiters, Temperature, DC, HF Short Circuit, Peak Current Limiters, Inrush Current Limiters, Turn-on Delay - Cooling: Front-to-rear, continuously variable fans - Ambient Temperature Limits: 40 to 105 deg. F - Safety Class: I - Dimensions (W x H x D): 19" x 34.7" x 16.6" - Weight: 24.6 lbs - Optional Accessories:  2-way internal X-Over cards, 24dB, LR, XHP-5 for 500Hz/XHP-8 for 800Hz RCM-810 IRIS-Net Control & Supervision Module Rear-Rackmount Kit RMK-15

M-Audio Projet Mix I/O - Sensitve Motorized Faders Audio Interface Firewire Fully working state. Coming in its original box. => Offered: 1x CD-ROM PROTOOLS M-POWERED 7 + 1 Dinkey Dongle => Original packaging contains:  - 1x Mac Firewire cable - 1x PC Firewire cable - 1x power supply - 1 x driver CD-ROM - User Guides OVERVIEW: M-Audio ProjectMix I/O is a control surface combined with a FireWire 18x14 audio interface that turns your computer into a complete digital production station. Features include 9 touch-sensitive motorized moving faders and 8 assignable endless rotary encoder knobs for channel or plug-in functions. I/Os include: 8 switchable phantom-powered analog mic/line inputs (XLR and 1/4" TRS balanced) with switchable phantom power and signal/peak LEDs; 8x8 ADAT Lightpipe; MIDI with activity LEDs; 2x2 S/PDIF coaxial optical/digital; 4 analog outputs (1/4" TRS balanced); 2 stereo headphone outputs (1/4" TRS) with independent level controls; and one front-panel instrument input (1/4" TS) switchable for input one. Each channel on this M-Audio Controller features mic/line, record enable, select, solo, and mute buttons. Channels and banks are selected via ± keys. A zoom key is included, with 4 directional keys, as well as dedicated keys for in/out points, locate, region nudge, and more.  Illuminated transport controls and a jog/shuttle wheel with a mode switch allow effortless navigation. The M-Audio ProjectMix control surface includes dedicated keys for in/out points, locate, region nudge, loop, and more. LED displays clearly display each channel's status. Word clock I/O (BNC) is supported. Compatible with Mackie Control, Logic Control, and HUI protocols plus support for most other popular applications.  SPECIFICATIONS: Connection FireWire Faders 8 x Touch-sensitive motorized channel faders 1 x Touch-sensitive motorized master fader Transport Controls Yes (illuminated) Jog/Shuttle Yes Rotary Controls 8 x Assignable rotary encoders Numeric Keypad No Display LCD for channel or plug-in functions Function LED display for each channel Softwares Supported but not provided: - Pro Tools M-Powered 7 or greater - Ableton Live 5 (version 5.02 or greater) - Logic (version 7.1.1 or greater) - Cubase (version 3.1 or greater) - Digital Performer (version 4.6 or greater) - SONAR (version 4.02 or greater)  System Requirements Mac (but not provided): G3 800MHz or G4 733MHz higher (may be higher for laptops)- G3/G4 accelerator cards not supported OS X 10.3.9 / 10.4.2 512MB RAM Available FireWire port or FireWire expansion card PC (but not provided): Pentium III 800MHz or higher (may be higher for laptops) Windows XP (SP2) DirectX 9.0c or higher 512 MB RAM Available FireWire port or FireWire expansion card Dimensions (WxDxH) 46 x 51 x 10 cm Weight approx. 12.5 kg Specialties Built-in 18 x 14 FireWire audio interface - no additional hardware required Will be sent well packed. Shipping to France: 28,55€ € Shipping to Europe and UK: 61,50 € Shipping to International: Please ask before bidding Accepted payment: Please only, PayPal

Bonjour ! Je vends mon enregistreur / caméra Zoom Q4 Hd Handy Camera Recorder Idéal pour filmer des concerts, répétitions, vidéos YouTube... vendu avec alimentation secteur, carte sd 16 gigas, se recharge aussi en usb. Notice non fourni (trouvable sur internet, et aussi simple qu’un téléphone) Appareil en bon état esthétique et parfait état de fonctionnement. Produit dans les 250e neuf... prix gentil pour que ça parte vite ! Envoi en colissimo avec suivi Paypal uniquement Descriptif technique: High-quality wide angle lens with selectable viewing angles Removable full-color LCD Built-in stereo X/Y microphone Records directly to SDXC cards (up to 128GB) Supports WVGA and HD (high-definition) video formats up to 1080 x 1920 pixels, with frame rates of 30 / 60 fps Supports AAC and WAV audio formats up to 24-bit/96k Flip screen function Three imaging sense options (AUTO/CONCERT/NIGHT) for use in all lighting environments Mic/Line-level input for connection to external microphones, portable recorders and personal music players Three-position MIC GAIN switch with Auto-Gain control (CONCERT/MEETING/SOLO) and Peak LED Supplied hairy windscreen and low-cut filter for the elimination of low-frequency noise and rumble Built-in speaker for fast monitoring Line-level/headphone output with dedicated volume control HDMI video output for connection to HDTVs, selectable between NTSC and PAL USB interface for live streaming and data transfer to and from computer editing software Compatible with USTREAM Producer, Flash live Media Encorder, Skype, and other popular streaming applications USB mic function for use with external devices such as computers and iPads (with Apple Camera Connection Kit) SDXC card reader function Rechargeable Li-Ion battery (chargeable via USB or optional AC adapter) Battery life of more than 2 hours Standard tripod mount Compatible with all three-prong action camera mounts Optional guitar head mount, mic stand mount, and water resistant jacket

Mamiya RB67 film back for 220 format film. Sold for parts or repair.  This back is in good external condition, and appears to function normally when checked with a dummy film, but sold for parts or repair because it isn't fully tested. It will need new light seals as the old ones have degraded. There is no dark slide included.  For items sold for 'parts or repair' - I try to give a good description of any faults I find, but it is not always possible to give a complete list, and there will sometimes be other problems not described in the listing. Please be aware of that before buying. I often have similar or compatible items for sale, see my shop for details. Please contact me via messages if you have any questions, I’m happy to give advice. Livraison en France Cet article sera livré par Relais Mondial Relay ou Colissimo Recommandé, selon votre sélection à la caisse.  International shipping I can ship this item to any location listed in the postage section of this listing. It will be sent tracked by Colissimo or Mondial Relay, depending on the item and destination. International delivery from France will usually take approximately five to seven working days, but it can occasionally be longer, especially at peak times. Please be aware of this before buying. Any import tax/duties in your country must be paid by the buyer. I try to photograph and describe my items as accurately as possible, and I package them very carefully, however in the unlikely event of a problem please let me know immediately and I will resolve it.

Tokina 28-70mm f4 manual focus zoom lens, Minolta MD mount. With front cap and matched lens hood. Sold for parts/repair as the iris is slow. This is Minolta MD/SR mount, for manual focus Minolta 35mm film SLRs, though it can be adapted to many other cameras with mount adapters. Externally this lens is in very good external condition, with minor wear and tear. The glass is clean, clear and unscratched, and free of haze and fungus. As with any used lens, there may be a few minor specks of internal dust. The aperture blades are clean and free of oil but the iris is a little slow to close when released, therefore may cause exposure problems. The zoom and focus barrels move smoothly, though the macro mode seems to be behave a little strangely. Tested and producing sharp images, but sold for parts/repair due to the iris fault.  For items sold for 'parts or repair' - I try to give a good description of any faults I find, but it is not always possible to give a complete list, and there will sometimes be other problems not described in the listing. Please be aware of that before buying. I often have similar or compatible items for sale, see my shop for details. Please contact me via messages if you have any questions, I’m happy to give advice. Delivery in France This item will be sent by Colissimo or Mondial Relay, depending on your choice at the checkout.  International shipping I can ship this item to any location listed in the postage section of this listing. All items are sent tracked and insured. I use Colissimo, Chronopost, UPS or Mondial Relay, depending on the item and destination. International delivery from France will usually take approximately 5 to 7 working days, but it can occasionally be longer, especially at peak times. Please be aware of this before buying. Any import tax/duties in your country must be paid by the buyer. I try to photograph and describe my items as accurately as possible, and I package them very carefully, however in the unlikely event of a problem please let me know immediately and I will resolve it.

Tamron AF Tele-Macro 90-300mm f4.5-5.6 zoom lens in Nikon F mount, with front cap, lens hood and protective filter. Sold for parts or repair as the iris is stuck.   Externally this lens is in good condition, with minor general signs of use. The glass is very good, it's clean, clear and unscratched, and free of haze and fungus. There are one or two minor specks of dust internally. The iris does not function correctly, the stop-down lever is very stiff. With some effort you can push the iris open and closed, but it is effectively stuck. The aperture ring moves through the settings, but the iris does not move.  The zoom and manual focus barrels work well, and when tested the lens produces sharp results. The autofocus doesn't work very well, it hunts a lot. Due to the iris issue this lens is not usable, except when used at the widest aperture, sold for parts or repair. For items sold for 'parts or repair' - I try to give a good description of any faults I find, but it is often not realistic to give a complete list, and there will sometimes be other problems not described in the listing. Please be aware of that before buying. I often have similar or compatible items for sale, see my shop for details. Please contact me via messages if you have any questions, I’m happy to give advice. Livraison en France Cet article sera livré par Relais Mondial Relay ou Colissimo Recommandé, selon votre sélection à la caisse. International shipping I can ship this item to any location listed in the postage section of this listing. It will be sent tracked by Colissimo or Mondial Relay, depending on the item and destination. International delivery from France will usually take approximately five to seven working days, but it can occasionally be longer, especially at peak times. Please be aware of this before buying. Any import tax/duties in your country must be paid by the buyer. I try to photograph and describe my items as accurately as possible, and I package them very carefully, however in the unlikely event of a problem please let me know immediately and I will resolve it.

Item was a gift, installed to test and check it was in perfect working order. The sound is better with it, but this is way too much for my humble set up, and space available, sadly. it will be sent in the special double box original packaging it came in so no worries. Parasound HALO A-52 + A52+ 5 VOIES 180 watts RMS x 5 8 Ω.     180 watts RMS x 5 @ 8 Ω     255 watts RMS x 5 @ 4 Ω     225 watts RMS x 2 @ 8 Ω     350 watts RMS x 2 @ 4 Ω     Class A/AB circuitry designed by legendary John Curl     Direct coupled - no capacitors or inductors in audio path ensures the cleanest signal     Balanced XLR inputs with discrete circuits     Full power is rated all the way down to 5Hz for unrestricted low-end bass     Custom 1.5 kVA encapsulated toroid power transformer with independent secondary windings for each channel     Hand-matched JFETs for input stage     Hand-matched MOSFETs for driver stage     Beta-matched 15 amp, 60 MHz bipolar output transistors (3 pairs per channel)     100,000 µF power supply filter capacitance     DC Servo and relay protection circuits     Auto turn on by audio signal or 12V trigger     Heavy-duty 24k gold-plated, 5-way speaker terminals     3U chassis with updated cosmetics, rack mountable with HRA3 (sold separately) Veuillez n'enchérir que si vous acceptez qu'il s'agit d'une vente privée, sans les garanties habituelles de l'UE et le droit de retour ! En soumettant une offre, vous acceptez cette condition. Power outpout 5 Channels Driven 180 watts x 5, 8 Ω 255 watts x 5, 4 Ω Power Output - 2 Channels Driven 225 watts x 2, 8 Ω 350 watts x 2, 4 Ω Power measurements parameters with 120VAC 0.05% THD, RMS continuous power, full audio band (20 Hz - 20 kHz) Current Capacity: 45 amperes peak, per channel Dynamic Headroom: >1.5dB Slew Rate > 130 volts per microsecond Frequency Response 5 Hz - 100 kHz, +0/-3 dB 20 Hz - 20 kHz, +0/-0.3 dB Total Harmonic Distortion (THD) IM Distortion TIM Unmeasurable Interchannel Crosstalk > 78 dB at 1 kHz > 63 dB at 20 kHz Input Impedance Unbalanced: 47 kΩ Balanced: 94 kΩ, 47 kΩ per leg Input Sensitivity for 28.28 V Output into 8 Ω Unbalanced: 1 V Balanced: 1 V per leg Total Gain: 29 dB S/N Ratio > 112 dB, input shorted, IHF A-weighted > 102 dB, input shorted, unweighted Damping Factor > 1100 at 20 Hz DC Trigger Requirements +9 Vdc to +12 Vdc, 5 mA Audio Trigger Requirements 2 mV - 10 mV XLR Pin Identification 1 = Ground (Shield) 2 = Positive 3 = Negative (Return) Dimensions Width: 17-1/4" (437 mm) Height without feet: 5-1/4" (133 mm) Height with feet: 5-7/8" (149 mm) Depth: 20" (508 mm) Depth with cables: 21-1/4" (540 mm) Net Weight 55 lb. (25 kg) Shipping Weight 69 lb. (31.3 kg) Power Requirement Standby: 1 Watt Idle: 125 Watts Maximum: 1500 Watts

Minolta Dynax 5 35mm film SLR with Minolta 28-80mm f3.5-5.6 D zoom lens, with front cap. Sold for parts or repair as it has some faults.  This camera kit is in good external condition, with some general signs of use. When checked with batteries (not included) the camera turns on, fires well and appears to operate normally. However the function dial on the front is not working properly. It's stiff to operate, sometimes it turns easily, sometimes not. It works, but it can be quite difficult to use. The viewfinder and focusing screen have quite a few dust spots. The mirror and lens mount are good, with minor signs of use, the film chamber is clean and the shutter looks OK. The lens is in good external condition, with light signs of use. There are mildew spots and specks of dust on the internal glass. The iris blades are free of oil and snappy, the zoom and focus barrels move smoothly. The focus works well in manual or auto modes, and it looks sharp through the viewfinder. No other functions tested, not tested with film, sold for parts/repair.  For items sold for 'parts or repair' - I try to give a good description of any faults I find, but it is not possible to give a complete list, and there will sometimes be other problems not described in the listing. Please be aware of that before buying. I often have similar or compatible items for sale, see my shop for details. Please contact me via messages if you have any questions, I’m happy to give advice. Delivery in France All items are sent by La Poste/Colissimo or Mondial Relay, depending on your choice at the checkout.  International shipping I can ship this item to any location listed in the postage section of this listing. I use La Poste, Colissimo, Chronopost, UPS or Mondial Relay, depending on the item and destination. International delivery from France will usually take approximately 5 to 7 working days, but it can occasionally be longer, especially at peak times. Please be aware of this before buying. Any import tax/duties in your country must be paid by the buyer. Tracking All items are sent tracked, with insurance where applicable. You will find the tracking number and delivery company used next to your item in 'My ', once it has been dispatched. You can track it through, but often the tracking will be more accurate and up-to-date on the website of the delivery company itself, so it's always better to look there. I try to photograph and describe my items as accurately as possible, and I package them very carefully, however in the unlikely event of a problem please let me know immediately and I will resolve it.

Soligor Tele-Auto 135mm f2.8 manual focus lens, Miranda mount, with front and rear caps. Untested, sold for parts or repair. This lens is in very good external condition, with some light signs of use. The little lever sticking out of the side of the lens mount is quite loose, it looks like it needs to be tightened up. The glass is clean and unscratched, with some light signs of use, and a few internal specks of dust. The aperture blades are clean and free of oil, the iris is snappy, and the aperture ring clicks correctly through the stops. The focus is very smooth. I have not tested this lens as I don;'t have a Miranda body, so I don't know if it's fully functional or not, sold for parts or repair. For items sold for 'parts or repair' - I try to give a good description of any faults I find, but it is not possible to give a complete list, and there will sometimes be other problems not described in the listing. Please be aware of that before buying. I often have similar or compatible items for sale, see my shop for details. Please contact me via messages if you have any questions, I’m happy to give advice. Delivery in France All items are sent by La Poste/Colissimo or Mondial Relay, depending on your choice at the checkout.  International shipping I can ship this item to any location listed in the postage section of this listing. I use La Poste, Colissimo, Chronopost, UPS or Mondial Relay, depending on the item and destination. International delivery from France will usually take approximately 5 to 7 working days, but it can occasionally be longer, especially at peak times. Please be aware of this before buying. Any import tax/duties in your country must be paid by the buyer. Tracking All items are sent tracked, with insurance where applicable. You will find the tracking number and delivery company used next to your item in 'My ', once it has been dispatched. You can track it through, but often the tracking will be more accurate and up-to-date on the website of the delivery company itself, so it's always better to look there. I try to photograph and describe my items as accurately as possible, and I package them very carefully, however in the unlikely event of a problem please let me know immediately and I will resolve it.

Une diode HF 1A3 MAZDA RADIO NOS en boite d'origine service transmission armée française pour RT-66,67,68 et R108,109,110 Équivalent 1A3 : 6519, DA90 & CV753 FEDERAL STOCK NUMBER: 5960-188-3527 Culot miniature 7 broches  Tube construit spécialement pour le discriminateur FM des postes RT-66,67,68 et R108,109,110 Du coup le RT67/GRC à 5 tubes de plus et pèse lourd.  Caractéristiques: - Chauffage filament série 1,4 volts 150 mA - tension maxi inverse 330 volts DC - Intensité de sortie DC 0,5 mA, peak 5mA Possibilité de grouper vos achats de tubes en visitant notre boutique cotatel1 pour diminuer les frais de port par objet One miniature pentode 1A3 NIB french Army box u/w RT-66,67,68 et R108,109,110 Equivalent 1A3: 6519, DA90 & CV753 FEDERAL STOCK NUMBER: 5960-188-3527 7 pin miniature base Tube built specifically for the FM discriminator of radio RT-66,67,68 et R108,109,110 Characteristics: Heating filament series 1.4 volts 150 mA Maximum reverse voltage 330 volts DC Output current DC 0.5 mA, peak 5mA Possibility of grouping your purchases of tubes by visiting our boutique cotatel1 to decrease the shipping costs by object

Micro testé et marche bien. L'AKG D-109 est un microphone omnidirectionnel de haute qualité qui a été conçu électroacoustiquement pour des performances optimales lorsqu'il est porté monté sur une cravate. Instrument compact et léger, le D-109 associe une reproduction vocale précise à une apparence discrète. Le D-109 est également fortement recommandé pour une utilisation «mains libres» dans les églises, les écoles, les amphithéâtres et les salles de conférence. Contrairement à un microphone conventionnel (qui exagère les basses fréquences et atténue les hautes fréquences lorsqu'il est «adapté» pour une utilisation en cravate). le D-109 a une réponse en fréquence spécialement profilée qui lui permet de fournir une reproduction de la parole naturellement équilibrée lorsqu'il est placé contre la poitrine de l'utilisateur: la réponse est intentionnellement réduite en dessous de 300 Hz pour réduire la coloration tonale causée par la résonance de la cavité thoracique. De plus, avec le clip cravate en forme d'anneau relevé complètement au-dessus du niveau de la grille du microphone, la réponse est amplifiée entre 2 kHz et 6 kHz pour compenser à la fois l'absence de propagation haute fréquence sous le menton et l'effet de filtrage des vêtements qui peut être utilisé pour dissimuler le microphone. (Le pic à 6 k Hz peut être réduit selon les besoins en abaissant le clip cravate, comme indiqué dans les courbes de réponse en fréquence ci-dessous.) La grille en treillis métallique du D-109 et son boîtier en laiton robuste encapsulent efficacement l'élément transducteur contre les particules métalliques et la poussière. Microphone tested and working well. The AKG D-109 is a high-qual ity omnidirectional microphone that has been electroacoustically designed for optimum performance when worn lavalier-mounted. A compact and lightweight instrument, the D-109 combines accurate speech reproduction with unobtrusive appearance. The D-109 is also highly recommended for "hands-free" use in churches, schools, lecture halls, and conference rooms. Unlike a conventional microphone (which exaggerates low frequencies and muffles high frequencies when "adapted" for lavalier use). the D-l09 has a specially contoured frequency response that enables it to provide naturally balanced speech reproduction when placed against the user's chest: Response is intentionalLy rolled off below 300 Hz to reduce tonal coloration caused by chest-cavity resonance. Furthermore, with the ring-shaped lavalier clip raised fully above the level of the microphone grille, response is boosted between 2 kHz and 6 kHz to compensate both for the lack of high-frequency propagation below the chin and for the filtering effect of clothing that may be used to conceal the microphone. (The peak at 6 k Hz may be reduced as required sirnply by lowering the lavalier clip, as shown in the frequency-response curves below.) The D·109's wire-mesh grille and rugged brass case effectively encapsulate the transducer element against metal particles and dust.