Replacement frame

Accessoires pour ordinateurs Accessoires pour ordinateurs Code EAN: 0614089717447 En-tête / Fabricant: Magideal Tranche de poids: 100 à 250 g Titre: Replacement US English Keyboard (With Frame) for Dell Inspiron 15 3000/5000/3541/3542/3543/5542/5545/5547 Series 15-5000 17-5000 MagiDeal Divers / Type de produit: Barre d'utilitaire

THE BEAM Frame Flash 2.0 | Autocollants réfléchissants Haute visibilité pour Cadres de vélo Adulte, Unisexe, Couleur: Noir, Universel, Black/Rainbow, Universalle THE BEAM Frame Flash 2.0 | Autocollants réfléchissants Haute visibilité pour Cadres de vélo Adulte, Unisexe, Couleur: Noir, Universel, Black/Rainbow, Universalle Hello, We Do Sell Mobiles, Computers Tablets & Network Accessories! Features Fabriqués à partir d'un pigment en poudre de verre pour assurer une visibilité totale, les autocollants FRAME FLASH 2.0 adhèrent à votre cadre, guidon de votre vélo, ou casque ce qui vous rend instantanément visible dans des conditions de faible luminosité, sans batterie ni électronique. Leur composition unique, à base de poudre de verre, offre une visibilité de 360 degrés. 11 rflecteurs adhsifs prdcoups Technologie de la poudre de verre Impermable leau Ultralger Convient pour toutes les cadres carbone aluminium et acier width: 0 x height: 0 x length: 0 x weight: 0 Payment We accept payments through PayPal, contact us to check the availability of other payment methods Shipping Items located in our US warehouse will be Shipped FREE to all addresses other than APO/PO boxes in the lower 48 states via USPS or UPS (depending on location and package weight) Unless stated otherwise, all orders will ship within 24 hours of your payment being processed. Items located in our China warehouse will be shipped out by Air Mail to your PayPal Address within 1-3 business days after receiving your cleared payment (estimated delivery time 10-25 business days, this all depends on how busy the postal system is & by varying countries inbound customs delays). We offer free shipping worldwide (some countries are excluded). Please note that delivery time for some countries might take longer than 30 business days. Tracking number will be provided once available from our shipping partner. Please contact us if you don't receive your item by 30 business days, we will check the status and try our best to resolve any problems for you. Please note that import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Check with your country's customs office to determine what these additional costs will be prior to bidding/buying, Thank you. Delivery & Return Policy Return shipping is the buyer's responsibility unless the return is a result of our mistake. We will pay for shipping replacement back to you if an exchange is requested

THE BEAM Frame Flash 2.0 | Autocollants réfléchissants Haute visibilité pour Cadres de vélo Adulte, Unisexe, Couleur: Rose, Universel, Universalle THE BEAM Frame Flash 2.0 | Autocollants réfléchissants Haute visibilité pour Cadres de vélo Adulte, Unisexe, Couleur: Rose, Universel, Universalle Hello, We Do Sell Mobiles, Computers Tablets & Network Accessories! Features Fabriqués à partir d'un pigment en poudre de verre pour assurer une visibilité totale, les autocollants FRAME FLASH 2.0 adhèrent à votre cadre, guidon de votre vélo, ou casque ce qui vous rend instantanément visible dans des conditions de faible luminosité, sans batterie ni électronique. Leur composition unique, à base de poudre de verre, offre une visibilité de 360 degrés. 11 rflecteurs adhsifs prdcoups Technologie de la poudre de verre Impermable leau Ultralger Convient pour toutes les cadres carbone aluminium et acier width: 0 x height: 0 x length: 0 x weight: 0 Payment We accept payments through PayPal, contact us to check the availability of other payment methods Shipping Items located in our US warehouse will be Shipped FREE to all addresses other than APO/PO boxes in the lower 48 states via USPS or UPS (depending on location and package weight) Unless stated otherwise, all orders will ship within 24 hours of your payment being processed. Items located in our China warehouse will be shipped out by Air Mail to your PayPal Address within 1-3 business days after receiving your cleared payment (estimated delivery time 10-25 business days, this all depends on how busy the postal system is & by varying countries inbound customs delays). We offer free shipping worldwide (some countries are excluded). Please note that delivery time for some countries might take longer than 30 business days. Tracking number will be provided once available from our shipping partner. Please contact us if you don't receive your item by 30 business days, we will check the status and try our best to resolve any problems for you. Please note that import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Check with your country's customs office to determine what these additional costs will be prior to bidding/buying, Thank you. Delivery & Return Policy Return shipping is the buyer's responsibility unless the return is a result of our mistake. We will pay for shipping replacement back to you if an exchange is requested

THE BEAM Frame Flash 2.0 | Autocollants réfléchissants Haute visibilité pour Cadres de vélo Adulte, Unisexe, Couleur: Argent, Universel, Universalle THE BEAM Frame Flash 2.0 | Autocollants réfléchissants Haute visibilité pour Cadres de vélo Adulte, Unisexe, Couleur: Argent, Universel, Universalle Hello, We Do Sell Mobiles, Computers Tablets & Network Accessories! Features Fabriqués à partir d'un pigment en poudre de verre pour assurer une visibilité totale, les autocollants FRAME FLASH 2.0 adhèrent à votre cadre, guidon de votre vélo, ou casque ce qui vous rend instantanément visible dans des conditions de faible luminosité, sans batterie ni électronique. Leur composition unique, à base de poudre de verre, offre une visibilité de 360 degrés. 11 rflecteurs adhsifs prdcoups Technologie de la poudre de verre Impermable leau Ultralger Convient pour toutes les cadres carbone aluminium et acier width: 0 x height: 0 x length: 0 x weight: 0 Payment We accept payments through PayPal, contact us to check the availability of other payment methods Shipping Items located in our US warehouse will be Shipped FREE to all addresses other than APO/PO boxes in the lower 48 states via USPS or UPS (depending on location and package weight) Unless stated otherwise, all orders will ship within 24 hours of your payment being processed. Items located in our China warehouse will be shipped out by Air Mail to your PayPal Address within 1-3 business days after receiving your cleared payment (estimated delivery time 10-25 business days, this all depends on how busy the postal system is & by varying countries inbound customs delays). We offer free shipping worldwide (some countries are excluded). Please note that delivery time for some countries might take longer than 30 business days. Tracking number will be provided once available from our shipping partner. Please contact us if you don't receive your item by 30 business days, we will check the status and try our best to resolve any problems for you. Please note that import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Check with your country's customs office to determine what these additional costs will be prior to bidding/buying, Thank you. Delivery & Return Policy Return shipping is the buyer's responsibility unless the return is a result of our mistake. We will pay for shipping replacement back to you if an exchange is requested

Housing for iPhone 12 Pro Max Replacement Genuine Frame Assembly Original Noir.

NEC - ST-EX2023 /Photo Frame Stand - Noir Product Details NEC ST-EX2023. Capacité de charge maximale: 3,3 kg Taille d'écran minimum compatible: 50,8 cm (20") Taille maximum d'écran compatible: 58,4 cm (23"). Angle d'inclinaison: 0 - 28°. Couleur: Noir. Compatibilité: EX201W EX231W EX231Wp Otras características: Angle d'inclinaison: 0 - 28° Capacité de charge maximale: 3,3 kg Compatibilité: EX201W/nEX231W/nEX231Wp Couleur: Noir Taille d'écran minimum compatible: 50,8 cm (20") Taille maximum d'écran compatible: 58,4 cm (23") Avec notre boutique, oubliez le stress des livraisons hors-délais (voir nos évaluations). Nos partenaires s'engagent à livrer vos colis dans les meilleurs délais, de manière rapide, simple et efficace ! La livraison est gratuite à toutes les adresses autres que des boîtes APO / PO dans la France et la Belgique. Notre stock se trouvent dans des entrepôts basés en France. Toutes les commandes sont expédié via DHL, La Poste, Chronopost ou UPS (selon l'emplacement et le poids du colis). Sauf indication contraire, toutes les commandes seront expédiées dans les 48 heures suivant la date de votre paiement. Consultez nos évaluations positives pour voir les bonnes critiques sur la rapidité de nos livraisons que nous vous offrons. Shipping is FREE to all addresses other than APO/PO boxes in the lower 48 states, France and Belgium. Our stock all ships from our France-based warehouses. Shipped via USPS, DHL, La Poste, Chronopost or UPS (depending on location and package weight) Unless stated otherwise, all orders will ship within 24 hours of your payment being processed. Check our feedback to see the great reviews of FAST shipping we offer.  PAIEMENT PAYPAL: Gardez l'esprit tranquille. PAYPAL protège vos achats. Si vous n'êtes pas livré ou que l'objet ne correspond pas à sa description, ils vous rembourserons et vous aiderons à trouver une solution avec nous (soumis à conditions). Nous offrons une politique de retour de 14 jours pour nos produits. Nous sommes derrière nos produits. Les articles peuvent nous être retournés pour échange ou remboursement complet dans les 14 jours à compter de la date de réception de votre marchandise. Nous ne sommes pas responsables pour tout achat après cette période de 14 jours. Les frais de retour sont de la responsabilité de l'acheteur sauf si le retour est le résultat de notre erreur. Nous prenons à notre charge les frais de renvois si un échange est demandé. Si vous avez des questions s'il vous plaît contactez-nous par «Posez une question au vendeur". Nous vous répondrons dans 1 jour ouvrable ou moins. Tous les retours doivent être effectués dans les 14 jours à compter de la date d'achat et UNIQUEMENT avec notre étiquette retour !! S'il vous plaît noter que nous ne pouvons plus rembourser après la limite de 14 jours. Lors d'un retour, veuillez noter que cela peut prendre jusqu'à 7 jours ouvrables pour que le retour soit traiter. Nous faisons de notre mieux pour traiter le plus rapidement possible. PAY SAFE: PAYPAL PAYMENT IS ACCEPTED We offer a 14-day return policy for our products. We stand behind our products. Items can be returned for exchange or full refund within 14 days from the date you receive your merchandise. We are not responsible for any purchase after this 30-day period. Return shipping is the responsibility of buyer unless the return is a result of our mistake. We will pay for shipping replacement back to you if an exchange is requested. If you have any questions please contact us through "Ask seller a question" link. We will respond within 1 business day or less. All returns must be done within 14 days of the date of purchase. Please note that we cannot give refunds after the 30 day limit has expired. When sending in a return, please note that it can take up to 7 business days for the return to be processed. We do our best to process as quickly as possible.

Elite ez Frame R120WH1 Ãcran de projection 120 po 305 cm 16 9 Tension Matte White Product Details Elite Screens ezFrame. Largeur: 2779 mm Profondeur: 41 mm Hauteur: 1610 mm. Couleur: Blanc Couleur Tour/Case: Noir Otras características: Angle de vision: 160° Couleur: Blanc Couleur Tour/Case: Noir Cycle operating par jour (max): Manuel Diagonale: 3,05 m (120") Diagonale (métrique): 305 cm Gain: 1.1 Hauteur: 1610 mm Hauteur de visualisation (h): 167,6 cm Largeur: 2779 mm Largeur de visualisation (l): 2,97 m Poids: 13,8 kg Positionnement: Mur Profondeur: 41 mm Rapport d'aspect: 16:9 Type de trame: Ecran fixe Avec notre boutique, oubliez le stress des livraisons hors-délais (voir nos évaluations). Nos partenaires s'engagent à livrer vos colis dans les meilleurs délais, de manière rapide, simple et efficace ! La livraison est gratuite à toutes les adresses autres que des boîtes APO / PO dans la France et la Belgique. Notre stock se trouvent dans des entrepôts basés en France. Toutes les commandes sont expédié via DHL, La Poste, Chronopost ou UPS (selon l'emplacement et le poids du colis). Sauf indication contraire, toutes les commandes seront expédiées dans les 48 heures suivant la date de votre paiement. Consultez nos évaluations positives pour voir les bonnes critiques sur la rapidité de nos livraisons que nous vous offrons. Shipping is FREE to all addresses other than APO/PO boxes in the lower 48 states, France and Belgium. Our stock all ships from our France-based warehouses. Shipped via USPS, DHL, La Poste, Chronopost or UPS (depending on location and package weight) Unless stated otherwise, all orders will ship within 24 hours of your payment being processed. Check our feedback to see the great reviews of FAST shipping we offer.  PAIEMENT PAYPAL: Gardez l'esprit tranquille. PAYPAL protège vos achats. Si vous n'êtes pas livré ou que l'objet ne correspond pas à sa description, ils vous rembourserons et vous aiderons à trouver une solution avec nous (soumis à conditions). Nous offrons une politique de retour de 14 jours pour nos produits. Nous sommes derrière nos produits. Les articles peuvent nous être retournés pour échange ou remboursement complet dans les 14 jours à compter de la date de réception de votre marchandise. Nous ne sommes pas responsables pour tout achat après cette période de 14 jours. Les frais de retour sont de la responsabilité de l'acheteur sauf si le retour est le résultat de notre erreur. Nous prenons à notre charge les frais de renvois si un échange est demandé. Si vous avez des questions s'il vous plaît contactez-nous par «Posez une question au vendeur". Nous vous répondrons dans 1 jour ouvrable ou moins. Tous les retours doivent être effectués dans les 14 jours à compter de la date d'achat et UNIQUEMENT avec notre étiquette retour !! S'il vous plaît noter que nous ne pouvons plus rembourser après la limite de 14 jours. Lors d'un retour, veuillez noter que cela peut prendre jusqu'à 7 jours ouvrables pour que le retour soit traiter. Nous faisons de notre mieux pour traiter le plus rapidement possible. PAY SAFE: PAYPAL PAYMENT IS ACCEPTED We offer a 14-day return policy for our products. We stand behind our products. Items can be returned for exchange or full refund within 14 days from the date you receive your merchandise. We are not responsible for any purchase after this 30-day period. Return shipping is the responsibility of buyer unless the return is a result of our mistake. We will pay for shipping replacement back to you if an exchange is requested. If you have any questions please contact us through "Ask seller a question" link. We will respond within 1 business day or less. All returns must be done within 14 days of the date of purchase. Please note that we cannot give refunds after the 30 day limit has expired. When sending in a return, please note that it can take up to 7 business days for the return to be processed. We do our best to process as quickly as possible.

Elite ez Frame R120WH1 Ãcran de projection 120 po 305 cm 16 9 Tension Matte White Product Details Elite Screens ezFrame. Largeur: 2779 mm Profondeur: 41 mm Hauteur: 1610 mm. Couleur: Blanc Couleur Tour/Case: Noir Otras características: Angle de vision: 160° Couleur: Blanc Couleur Tour/Case: Noir Cycle operating par jour (max): Manuel Diagonale: 3,05 m (120") Diagonale (métrique): 305 cm Gain: 1.1 Hauteur: 1610 mm Hauteur de visualisation (h): 167,6 cm Largeur: 2779 mm Largeur de visualisation (l): 2,97 m Poids: 13,8 kg Positionnement: Mur Profondeur: 41 mm Rapport d'aspect: 16:9 Type de trame: Ecran fixe Avec notre boutique, oubliez le stress des livraisons hors-délais (voir nos évaluations). Nos partenaires s'engagent à livrer vos colis dans les meilleurs délais, de manière rapide, simple et efficace ! La livraison est gratuite à toutes les adresses autres que des boîtes APO / PO dans la France et la Belgique. Notre stock se trouvent dans des entrepôts basés en France. Toutes les commandes sont expédié via DHL, La Poste, Chronopost ou UPS (selon l'emplacement et le poids du colis). Sauf indication contraire, toutes les commandes seront expédiées dans les 48 heures suivant la date de votre paiement. Consultez nos évaluations positives pour voir les bonnes critiques sur la rapidité de nos livraisons que nous vous offrons. Shipping is FREE to all addresses other than APO/PO boxes in the lower 48 states, France and Belgium. Our stock all ships from our France-based warehouses. Shipped via USPS, DHL, La Poste, Chronopost or UPS (depending on location and package weight) Unless stated otherwise, all orders will ship within 24 hours of your payment being processed. Check our feedback to see the great reviews of FAST shipping we offer.  PAIEMENT PAYPAL: Gardez l'esprit tranquille. PAYPAL protège vos achats. Si vous n'êtes pas livré ou que l'objet ne correspond pas à sa description, ils vous rembourserons et vous aiderons à trouver une solution avec nous (soumis à conditions). Nous offrons une politique de retour de 30 jours pour nos produits. Nous sommes derrière nos produits. Les articles peuvent nous être retournés pour échange ou remboursement complet dans les 30 jours à compter de la date de réception de votre marchandise. Nous ne sommes pas responsables pour tout achat après cette période de 30 jours. Les frais de retour sont de la responsabilité de l'acheteur sauf si le retour est le résultat de notre erreur. Nous prenons à notre charge les frais de renvois si un échange est demandé. Si vous avez des questions s'il vous plaît contactez-nous par «Posez une question au vendeur". Nous vous répondrons dans 1 jour ouvrable ou moins. Tous les retours doivent être effectués dans les 30 jours à compter de la date d'achat et UNIQUEMENT avec notre étiquette retour !! S'il vous plaît noter que nous ne pouvons plus rembourser après la limite de 30 jours. Lors d'un retour, veuillez noter que cela peut prendre jusqu'à 7 jours ouvrables pour que le retour soit traiter. Nous faisons de notre mieux pour traiter le plus rapidement possible. PAY SAFE: PAYPAL PAYMENT IS ACCEPTED We offer a 30-day return policy for our products. We stand behind our products. Items can be returned for exchange or full refund within 30 days from the date you receive your merchandise. We are not responsible for any purchase after this 30-day period. Return shipping is the responsibility of buyer unless the return is a result of our mistake. We will pay for shipping replacement back to you if an exchange is requested. If you have any questions please contact us through "Ask seller a question" link. We will respond within 1 business day or less. All returns must be done within 30 days of the date of purchase. Please note that we cannot give refunds after the 30 day limit has expired. When sending in a return, please note that it can take up to 7 business days for the return to be processed. We do our best to process as quickly as possible.

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable   Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 02-avr.-19 à 09:52:29 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable   Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 05-sept.-19 à 22:14:30 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable   Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 04-sept.-19 à 18:24:09 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable   Le 24-déc.-18 à 13:37:18 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 02-avr.-19 à 12:08:11 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 01-avr.-19 à 13:08:56 Paris, le vendeur a ajouté les informations suivantes:

  Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable     Le 09-mai-19 à 05:43:10 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 06-mai-19 à 09:56:09 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 06-mai-19 à 07:54:08 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 06-juin-19 à 13:31:05 Paris, le vendeur a ajouté les informations suivantes:

  Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable     Le 08-juil.-19 à 08:14:13 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable   Le 20-juil.-19 à 16:13:15 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 17-juil.-19 à 09:19:16 Paris, le vendeur a ajouté les informations suivantes:

  Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable     Le 13-juil.-19 à 14:54:17 Paris, le vendeur a ajouté les informations suivantes:

  Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable     Le 13-juil.-19 à 04:59:04 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 19-août-19 à 13:43:11 Paris, le vendeur a ajouté les informations suivantes:

  Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable -Nous acceptons seulement le paiement Paypal. - acheteurs   internationaux - veuillez   noter: a) les taxes et frais d'importation ne sont pas inclus dans le prix de l'article ou les frais d'expédition.  Ces   charges   sont   la   responsabilité   de   l' acheteur. b) Veuillez vérifier auprès du Bureau de douane de votre pays pour déterminer ce que ces coûts supplémentaires seront avant d'enchérir/acheter. * Nous ne pouvons pas expédier aux cases postales ou aux adresses d'APO/FPO Merci!     Le 23-août-19 à 18:22:31 Paris, le vendeur a ajouté les informations suivantes:

540mm LED Backlight Strip Kit For 24" inch Update CCFL LCD Screen To MonitWFFR Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 22-août-19 à 10:39:35 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 03-sept.-19 à 19:13:32 Paris, le vendeur a ajouté les informations suivantes:

Support de cadre ABS / PLA de support de bâti de table de support de bâti deLTA Feature: 100% brand new and high quality Hatchbox 3D Printer Filament Rack 1 Filament spool compatibility - Tabletop or Wall Mount Use (wall mount screws are not included) Constructed of stainless steel - Filament pictured is for display purpose only, not included Universally designed to meet your filament need Please view the product description for additional information Filament Spool Compatibility: Minimum Spool Diameter: 1 inch or 25.40    Maximum Spool Width: 3.75 inch or 95.25 millimeter 1 Spool Rack - Assembled Dimension: Note: measured with included rubber ends for tabletop use. Length: 8.50 inch or 215.90 millimeter Width 5.40 inch or 137 millimeter Height: 6.50 inch or 165 millimete Color:as the pic(send at random)   Package Included: 1 X Consumables Frame(not include the filament) -We Only accept Paypal payment. *We are unable to ship to PO Boxes or APO/FPO addresses -International Buyers-Please Note: a)Import dutiesm taxes and charges are not included in the item price or shipping charges.These charges are the buyer's responsibility. b)Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. Thank you! -All our products have been checked and packaged in good condition. If the items you received is defective, please inform us within 7 days upon receipt of item, we will replace another new one or refund if stock out (shipping fee is not refundable) -Buyers have to pay for the return cost and we pay the cost for reshipping. -Please add a piece of paper written your ID accompanied with the returned item so that we could process the replacement/refund accordingly. Feature: 100% brand new and high quality Hatchbox 3D Printer Filament Rack 1 Filament spool compatibility - Tabletop or Wall Mount Use (wall mount screws are not included) Constructed of stainless steel - Filament pictured is for display purpose only, not included Universally designed to meet your filament need Please view the product description for additional information Filament Spool Compatibility: Minimum Spool Diameter: 1 inch or 25.40    Maximum Spool Width: 3.75 inch or 95.25 millimeter 1 Spool Rack - Assembled Dimension: Note: measured with included rubber ends for tabletop use. Length: 8.50 inch or 215.90 millimeter Width 5.40 inch or 137 millimeter Height: 6.50 inch or 165 millimete Color:as the pic(send at random)   Package Included: 1 X Consumables Frame(not include the filament) PAYMENT -We Only accept Paypal payment. *We are unable to ship to PO Boxes or APO/FPO addresses -International Buyers-Please Note: a)Import dutiesm taxes and charges are not included in the item price or shipping charges.These charges are the buyer's responsibility. b)Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. Thank you! SHIPPING Terms of Sale -All our products have been checked and packaged in good condition. If the items you received is defective, please inform us within 7 days upon receipt of item, we will replace another new one or refund if stock out (shipping fee is not refundable) -Buyers have to pay for the return cost and we pay the cost for reshipping. -Please add a piece of paper written your ID accompanied with the returned item so that we could process the replacement/refund accordingly. ABOUT US Le 08-nov.-19 à 18:00:26 Paris, le vendeur a ajouté les informations suivantes:

Bachmann 915.503 copripresa électrique Product Details Couvercle en aluminium pour Power Frame pour bloc multiprise 3 prises Contenu de la livraison: Cache Power Frame Cover multiprise 915503 de la marque Bachmann Otras características: Couleur: Blanc Avec notre boutique, oubliez le stress des livraisons hors-délais (voir nos évaluations). Nos partenaires s'engagent à livrer vos colis dans les meilleurs délais, de manière rapide, simple et efficace ! La livraison est gratuite à toutes les adresses autres que des boîtes APO / PO dans la France et la Belgique. Notre stock se trouvent dans des entrepôts basés en France. Toutes les commandes sont expédié via DHL, La Poste, Chronopost ou UPS (selon l'emplacement et le poids du colis). Sauf indication contraire, toutes les commandes seront expédiées dans les 48 heures suivant la date de votre paiement. Consultez nos évaluations positives pour voir les bonnes critiques sur la rapidité de nos livraisons que nous vous offrons. Shipping is FREE to all addresses other than APO/PO boxes in the lower 48 states, France and Belgium. Our stock all ships from our France-based warehouses. Shipped via USPS, DHL, La Poste, Chronopost or UPS (depending on location and package weight) Unless stated otherwise, all orders will ship within 24 hours of your payment being processed. Check our feedback to see the great reviews of FAST shipping we offer.  PAIEMENT PAYPAL: Gardez l'esprit tranquille. PAYPAL protège vos achats. Si vous n'êtes pas livré ou que l'objet ne correspond pas à sa description, ils vous rembourserons et vous aiderons à trouver une solution avec nous (soumis à conditions). Nous offrons une politique de retour de 14 jours pour nos produits. Nous sommes derrière nos produits. Les articles peuvent nous être retournés pour échange ou remboursement complet dans les 14 jours à compter de la date de réception de votre marchandise. Nous ne sommes pas responsables pour tout achat après cette période de 14 jours. Les frais de retour sont de la responsabilité de l'acheteur sauf si le retour est le résultat de notre erreur. Nous prenons à notre charge les frais de renvois si un échange est demandé. Si vous avez des questions s'il vous plaît contactez-nous par «Posez une question au vendeur". Nous vous répondrons dans 1 jour ouvrable ou moins. Tous les retours doivent être effectués dans les 14 jours à compter de la date d'achat et UNIQUEMENT avec notre étiquette retour !! S'il vous plaît noter que nous ne pouvons plus rembourser après la limite de 14 jours. Lors d'un retour, veuillez noter que cela peut prendre jusqu'à 7 jours ouvrables pour que le retour soit traiter. Nous faisons de notre mieux pour traiter le plus rapidement possible. PAY SAFE: PAYPAL PAYMENT IS ACCEPTED We offer a 14-day return policy for our products. We stand behind our products. Items can be returned for exchange or full refund within 14 days from the date you receive your merchandise. We are not responsible for any purchase after this 30-day period. Return shipping is the responsibility of buyer unless the return is a result of our mistake. We will pay for shipping replacement back to you if an exchange is requested. If you have any questions please contact us through "Ask seller a question" link. We will respond within 1 business day or less. All returns must be done within 14 days of the date of purchase. Please note that we cannot give refunds after the 30 day limit has expired. When sending in a return, please note that it can take up to 7 business days for the return to be processed. We do our best to process as quickly as possible.

Store category Sign Up Now ! You may also like 10''-27'' VESA Monitor Tilt Mounted Fold Holder LCD Display Touch Screen Stand Product Description 新增網頁1 Tilt Mounted Fold Monitor Holder VESA 10''-27'' LCD Display Touch Screen Stand BRAND NEW Item ! Never Used !! 　 we will answer any of your questions regarding item(s)& service within 24 hrs. Features: 100% new and high quality Stand fixture for secure mounting of your touchscreen, POS, or PC monitors Flexible adjustable for monitors from 10 inch to 27 inch Sturdy design with a clad metal frame and two solid swivel joints Suitable for VESA 100x100mm & 75x75mmstand or wall mounting Allrounder mount for almost all applications: control monitors, POS systems, POS systems, Keyboard text displays, exhibition demonstrations or as a support for monitoring monitors Specifications: Material: Plastic Colour: Black Holder panel size: 205x65x10mm Metal frame: 125x125mm Overall Height: 300mm Max loading capacity: 10kg Suitable for 10"-27" Touchscreen Comply with VESA standard 75mm and100mm hole distance Product contains: 1x Touchscreen Stand About the seller Shipping & handling Terms of sales Payment Contact us About the seller Welcome to shop in my store,we carry thousand of excellent items, w e always value client service as well as product quality.Please feel free to contact us for any concerns. We will leave positive feedback to buyer as soon as buyer pays for the item.We highly appreciate that you can contact with us before you leaving Negative feedback or Neutral feedback.We will offer help to resolve your problems as fast as possible. Shipping & handling Shipping & Handling: All the orders will be processed within stated time after payment is received. We ONLY ship your item to your PayPal shipping address. If you want your package to be sent to any address other than your Paypal shipping address, please state it clearly in the PayPal note section and also confirm with us by email.   Terms of sales All sales are final. Refunds given only if item found defective on arrive (DOA) and cannot be replaced. Replacement is available for wrong or defective item receipt within the first 30 days,it's free of extra charge. Please contact us for the return procedure. Payment PayPal - we accept Paypal as payment method only,you can use credit care to pay via Paypal. We ONLY ship your item to your PayPal shipping address. If you want your package to be sent to any address other than your Paypal shipping address, please state it clearly in the PayPal note section and also confirm with us by email. Payment is expected within 7 days after auction end. This is serious business, so please make sure you are serious before bidding the item. Contact us Please contact us if you have any questions,you will receive answer within 24 hours,we work 7 days a week.